In commit b0fcc6fc7f ("build: rebuild build.ninja using
"meson setup --reconfigure"", 2023-05-19) I changed the build.ninja
rule in the Makefile to use "meson setup" so that the Makefile would
pick up a changed path to the meson binary.
However, there was a reason why build.ninja was rebuilt using $(NINJA)
itself. Namely, ninja has its own cache of file modification times,
and if it does not know about the modification that was done outside
its control, it will *also* try to regenerate build.ninja. This can be
simply by running "make" on a fresh tree immediately after "configure";
that will trigger an unnecessary meson run.
So, apply a refinement to the rule in order to cover both cases:
- track the meson binary that was used (and that is embedded in
build.ninja's reconfigure rules); to do this, write build.ninja.stamp
right after executing meson successfully
- if it changed, force usage of "$(MESON) setup --reconfigure" to
update the path in the reconfigure rule
- if it didn't change, use "$(NINJA) build.ninja" just like before
commit b0fcc6fc7f.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add simple tests written in C
-----BEGIN PGP SIGNATURE-----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=5m1P
-----END PGP SIGNATURE-----
Merge tag 'pull-tricore-20230607' of https://github.com/bkoppelmann/qemu into staging
- Refactor PCXI/ICR field handling in newer ISA versions
- Add simple tests written in C
# -----BEGIN PGP SIGNATURE-----
#
# iQJTBAABCgA9FiEEbmNqfoPy3Qz6bm43CtLGOWtpyhQFAmSArqkfHGtiYXN0aWFu
# QG1haWwudW5pLXBhZGVyYm9ybi5kZQAKCRAK0sY5a2nKFKKTD/0dXpexGX7K62d4
# dLZwj9AHOa/9NOD4E6+ub2UYovF7UlydSzy+mgJyxiIUGaPBHYe3dFfktHOppSwn
# OGJp9TTqeutpXYF8/zvDnmf+TDJ71DRQWM40uC0HAUXrjUO43PiK0LMh+fm5D9uG
# vRHSDGBWUNZrNxTZSj8Kx7Sb7PkqeB8qWvpIJh1AVVhIT+dyoAp5V7EkAETpwhtz
# a7qKclQpFNWdaYnthCF5wcmoMawQKMUnO96j0lQWIXfnhDP7XmrWlNM7Ry2cMPEy
# aRxAT3hTOr2dD2Cic8brF/w1NeXJjxWDz65uD7X7Rog54+SD4+SmfZiYwdAs5YMo
# 1XTkbG0qE6HwrtaO+nZDQZFc8tdvLSlDcBd/cjOonwxJyvJVX8qjR2Ufb3PSfTct
# 85R5wRBsEapSbQwicwu71fK0N8ZVkLM3fc4nFEKMxOx8I66eJm3bcTxpT/A8knEw
# OwykEVB3Xiq45JlWOV2BkyZJ1EiHeFQzZfzckW4bYFDdCnuMHlaVG9qpKEAu7mQh
# 4Ug3Y4KhYqZA0UDHG6Ik6Ms64FYU4s+zbFYic/Jhew9NC4MoMXa8oKqXJC5W7RCl
# 1HesyBPu1i/45Xk6/kneJ16YO+i4hcH+Hp/osJrRE6qFHGtbvKJ0EFy1471YHyLf
# HjRQBmsd9XW2TaYBQgST80UvCh9CkQ==
# =5m1P
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 07 Jun 2023 09:22:01 AM PDT
# gpg: using RSA key 6E636A7E83F2DD0CFA6E6E370AD2C6396B69CA14
# gpg: issuer "kbastian@mail.uni-paderborn.de"
# gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6E63 6A7E 83F2 DD0C FA6E 6E37 0AD2 C639 6B69 CA14
* tag 'pull-tricore-20230607' of https://github.com/bkoppelmann/qemu:
tests/tcg/tricore: Add recursion test for CSAs
target/tricore: Fix wrong PSW for call insns
target/tricore: Refactor PCXI/ICR register fields
tests/tcg/tricore: Add first C program
tests/tcg/tricore: Uses label for memory addresses
tests/tcg/tricore: Move asm tests into 'asm' directory
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
this allows us to exercise the startup code used by GCC to call main().
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230526061946.54514-4-kbastian@mail.uni-paderborn.de>
If configure was invoked with --disable-download and git
submodules were not checked out a warning is produced and the
configure script fails. But the $download variable (which
reflects the enable/disable download argument) is checked for in
a weird fashion:
test -f "$download" = disabled
Drop the '-f' to check for the actual value of the variable.
Fixes: 2019cabfee ("meson: subprojects: replace submodules with wrap files", 2023-06-06)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reuse --enable/--disable-download to control git submodules as well.
Adjust the error messages of git-submodule.sh to refer to the new
option.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only remaining user of submodules at build time is roms/SLOF,
which is handled in pc-bios/s390-ccw/Makefile. Remove the relevant
code from the main makefile.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Unlike other subprojects, these require an overlay directory to include
meson rules to build the libraries. The rules are basically lifted
from tests/fp/meson.build, with a few changes to create platform.h
and publish a dependency.
The build defines are passed through a subproject option, and posted
back to users of the library via the dependency's compile_args.
The only remaining user of GIT_SUBMODULES and GIT_SUBMODULES_ACTION
is roms/SLOF, which is used to build pc-bios/s390-ccw. All other
roms submodules are only present to satisfy the license on pre-built
firmware blobs.
Best reviewed with --color-moved.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the handling of the roms/SLOF submodule out of the main Makefile,
since we are going to remove submodules from the build process of QEMU.
Acked-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Compared to submodules, .wrap files have several advantages:
* option parsing and downloading is delegated to meson
* the commit is stored in a text file instead of a magic entry in the
git tree object
* we could stop shipping external dependencies that are only used as a
fallback, but not break compilation on platforms that lack them.
For example it may make sense to download dtc at build time, controlled
by --enable-download, even when building from a tarball. Right now,
this patch does the opposite: make-release treats dtc like libvfio-user
(which is not stable API and therefore hasn't found its way into any
distros) and keycodemap (which is a copylib, for better or worse).
dependency() can fall back to a wrap automatically. However, this
is only possible for libraries that come with a .pc file, and this
is not very common for libfdt even though the upstream project in
principle provides it; it also removes the control that we provide with
--enable-fdt={system,internal}. Therefore, the logic to pick system
vs. internal libfdt is left untouched.
--enable-fdt=git is removed; it was already a synonym for
--enable-fdt=internal.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The behavior of --{enable,disable}-pypi is similar to that of
-Dwrapmode={default,nodownload} respectively. In particular,
in both cases a feature needs to be explicitly enabled for the
dependency to be downloaded.
So, use a single option to control both cases. Now, --enable-slirp
will trigger cloning and building of libslirp if the .pc file
is not found on the machine.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The scenario for which --with-git= was introduced was to use a SOCKS proxy
such as tsocks. However, this was back in 2017 when QEMU's submodules
used the git:// protocol, and it is not as important when using the
"smart HTTP" backend; for example, neither "meson subprojects download"
nor scripts/checkpatch.pl obey the GIT environment variable.
So remove the knob, but test for the presence of git in the configure and
git-submodule.sh scripts, and suggest using --with-git-submodules=validate
+ a manual invocation of git-submodule.sh when git does not work. Hopefully
in the future the GIT environment variable will be supported by Meson.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Setting the MAKE variable to a GNU Make executable does not really have
any effect: if a non-GNU Make is used, the QEMU Makefile will fail to
parse. Just remove everything related to --make and $make as dead code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By using a subproject, our own meson.build can use variables from
the subproject instead of hard-coded paths. This is also the first step
towards managing downloads with .wrap files instead of submodule.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Recent dtc/libfdt can use either Make or meson as the build system.
By using a subproject, our own meson.build can remove the hard
coded list of source files.
This is also the first step towards managing downloads with .wrap
files instead of submodule.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Apart from CLICOLOR_FORCE and GREP_OPTIONS, there are other variables
that are listed in the Autoconf manual. While Autoconf neutralizes them
very early, and assumes it does not (yet) run in a shell that has "unset",
QEMU assumes that the user invoked configure under a POSIX shell, and
therefore can simply use "unset" to clear them.
CDPATH is particularly nasty because it messes up "cd ... && pwd".
Reported-by: Juan Quintela <quintela@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some scripts are invoked via the first "python3" binary in the PATH,
because they are executable and their shebang line is "#! /usr/bin/env
python3". To enforce usage of $(PYTHON), make them nonexecutable.
Scripts invoked via meson need nothing else, and meson-buildoptions.py
is already using $(PYTHON). For probe-gdb-support.py however the
invocation in the configure script has to be adjusted.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reintroduce the cmd_line.txt mangling to remove the sphinx_build option
when rerunning meson. The mechanism was removed in commit 75cc286485
("configure: remove backwards-compatibility code", 2023-01-11) because
the fixups were obsolete at the time; however, the Meson deprecation
mechanism doesn't quite work when options are finally removed, so we
need to bring it back.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
=1CyJ
-----END PGP SIGNATURE-----
Merge tag 'pull-hex-20230518-1' of https://github.com/quic/qemu into staging
Hexagon update
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEENjXHiM5iuR/UxZq0ewJE+xLeRCIFAmRmgQgACgkQewJE+xLe
# RCJLtAf8C/0kQRa4mjnbsztXuFyca53UxAv3BSBEDla4ZcMfFBoVJsGB3OP7IPXd
# KBQpkLyJAVye9idex5xqdp9nIfoGKDTsc6YtCfGujZ17cDpzLRDpHdUTex8PcZYK
# wpfM3hoVJsYRBMsojZ4OaxatjFQ+FWzrIH6FcgH086Q8TH4w9dZLNEJzHC4lOj0s
# 7qOuw2tgm+vOVlzsk/fv6/YD/BTeZTON3jgTPvAnvdRLb/482UpM9JkJ8E4rbte3
# Ss5PUK8QTQHU0yamspGy/PfsYxiptM+jIWGd836fAGzwF12Ug27mSc1enndRtQVW
# pQTdnOnWuuRzOwEpd7x3xh9upACm4g==
# =1CyJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 18 May 2023 12:48:24 PM PDT
# gpg: using RSA key 3635C788CE62B91FD4C59AB47B0244FB12DE4422
# gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422
* tag 'pull-hex-20230518-1' of https://github.com/quic/qemu: (44 commits)
Hexagon (linux-user/hexagon): handle breakpoints
Hexagon (gdbstub): add HVX support
Hexagon (gdbstub): fix p3:0 read and write via stub
Hexagon: add core gdbstub xml data for LLDB
gdbstub: add test for untimely stop-reply packets
gdbstub: only send stop-reply packets when allowed to
Remove test_vshuff from hvx_misc tests
Hexagon (decode): look for pkts with multiple insns at the same slot
Hexagon (iclass): update J4_hintjumpr slot constraints
Hexagon: append eflags to unknown cpu model string
Hexagon: list available CPUs with `-cpu help`
Hexagon (target/hexagon/*.py): raise exception on reg parsing error
target/hexagon: fix = vs. == mishap
Hexagon (target/hexagon) Additional instructions handled by idef-parser
Hexagon (target/hexagon) Move items to DisasContext
Hexagon (target/hexagon) Move pkt_has_store_s1 to DisasContext
Hexagon (target/hexagon) Move pred_written to DisasContext
Hexagon (target/hexagon) Move new_pred_value to DisasContext
Hexagon (target/hexagon) Move new_value to DisasContext
Hexagon (target/hexagon) Make special new_value for USR
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add support for the ELF flags
Move target/hexagon/cpu.[ch] to be v73
Change the compiler flag used by "make check-tcg"
The decbin instruction is removed in Hexagon v73, so check the
version before trying to compile the instruction.
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20230427224057.3766963-2-tsimpson@quicinc.com>
All calls to probe_target_compiler are conditioned on
some "have_target" invocation, or inside a loop on target_list.
Therefore there is no issue with building unnecessary
firmware images and tests.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move some variable assignments around for clarity and to remove
one of three loops on the command line arguments.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tests run in configure are pretty trivial at this point, so
do not bother with the extra complication of running tests
both with and without -Werror.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The comment is not correct anymore, in that the usability test for
the compiler and linker are done after probing $cpu, and Meson will
redo them anyway.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the slighly nicer .version_compare() function for GCC; for Clang that is
not possible due to the mess that Apple does with version numbers.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the only remaining uses of QEMU_CFLAGS. Now that no
feature tests are done in configure, it is possible to remove
CONFIGURE_CFLAGS and CONFIGURE_LDFLAGS as well.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson already knows to test with the positive form of the flag, which
simplifies the test. Warnings are now tested explicitly for the C++
compiler, instead of hardcoding those that are only available for
the C language.
At this point all compiler flags in QEMU_CFLAGS are global and only
depend on the OS. No feature tests are performed in configure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To simplify the code, rename coroutine-win32.c to match the option
passed to configure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This disables the old behavior of detecting SafeStack from environment
CFLAGS. SafeStack is now enabled purely based on the configure arguments.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All uses of pkg-config have been moved to Meson.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU adds the path to glib.h to all compilation commands. This is simpler
due to the pervasive use of static_library, and was grandfathered in from
the previous Make-based build system. Until Meson 0.63 the only way to
do this was to detect glib in configure and use add_project_arguments,
but now it is possible to use add_project_dependencies instead.
gmodule is detected in a separate variable, with export enabled for
modules and disabled for plugin.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The option is new in Meson 0.63 and removes the need to pass "static:
true" to all dependency and find_library invocation. Actually cleaning
up the invocations is left for a separate patch.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This version allows cleanups in modinfo collection, but they only
work with Ninja 1.9.x and 1.8.x is still supported. It also supports the
equivalent of QEMU's --static option to configure.
The wheel file is bumped to 0.63.3, the last release in the 0.63 branch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we begin requiring Python 3.7+, a few platforms are going to need to
install an additional Python interpreter package.
As a courtesy to the user, suggest the optional package they might need
to install. This will hopefully minimize any downtime caused by the
change in Python dependency.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230221012456.2607692-3-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230511035435.734312-25-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Python 3.6 was EOL 2021-12-31. Newer versions of upstream libraries have
begun dropping support for this version and it is becoming more
cumbersome to support. Avocado-framework and qemu.qmp each have their
own reasons for wanting to drop Python 3.6, but won't until QEMU does.
Versions of Python available in our supported build platforms as of today,
with optional versions available in parentheses:
openSUSE Leap 15.4: 3.6.15 (3.9.10, 3.10.2)
CentOS Stream 8: 3.6.8 (3.8.13, 3.9.16)
CentOS Stream 9: 3.9.13
Fedora 36: 3.10
Fedora 37: 3.11
Debian 11: 3.9.2
Alpine 3.14, 3.15: 3.9.16
Alpine 3.16, 3.17: 3.10.10
Ubuntu 20.04 LTS: 3.8.10
Ubuntu 22.04 LTS: 3.10.4
NetBSD 9.3: 3.9.13*
FreeBSD 12.4: 3.9.16
FreeBSD 13.1: 3.9.16
OpenBSD 7.2: 3.9.16
Note: Our VM tests install 3.9 explicitly for FreeBSD and 3.10 for
NetBSD; the default for "python" or "python3" in FreeBSD is
3.9.16. NetBSD does not appear to have a default meta-package, but
offers several options, the lowest of which is 3.7.15. "python39"
appears to be a pre-requisite to one of the other packages we request in
tests/vm/netbsd. pip, ensurepip and other Python essentials are
currently only available for Python 3.10 for NetBSD.
CentOS and OpenSUSE support parallel installation of multiple Python
interpreters, and binaries in /usr/bin will always use Python 3.6. However,
the newly introduced support for virtual environments ensures that all build
steps that execute QEMU Python code use a single interpreter.
Since it is safe to under our supported platform policy, bump our
minimum supported version of Python to 3.7.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20230511035435.734312-24-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the event that there's no vendored source present and no sufficient
version of $package can be found, we will attempt to connect to PyPI to
install the package if '--disable-pypi' was not passed.
This means that PyPI access is "enabled by default", but there are some
subtleties that make this action occur much less frequently than you
might imagine:
(1) While --enable-pypi is the default, vendored source will always be
preferred when found, making PyPI a fallback. This should ensure
that configure-time venv building "just works" for almost everyone
in almost every circumstance.
(2) Because meson source is, at time of writing, vendored directly into
qemu.git, PyPI will never be used for sourcing meson.
(3) Because Sphinx is an optional dependency, if docs are set to "auto",
PyPI will not be used to obtain Sphinx source as a fallback and
instead docs will be disabled. If PyPI sourcing of sphinx is
desired, --enable-docs should be passed to force the lookup. I chose
this as the default behavior to avoid adding new internet lookups to
a "default" invocation of configure.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-23-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When docs are explicitly requested, require Sphinx>=1.6.0. When docs are
explicitly disabled, don't bother to check for Sphinx at all. If docs
are set to "auto", attempt to locate Sphinx, but continue onward if it
wasn't located.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-22-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move this option back from meson into configure for the purposes of
using the configuration value to bootstrap Sphinx in different ways
based on this value.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-21-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This commit changes how we detect and install meson. It notably removes
'--meson='.
Currently, configure creates a lightweight Python virtual environment
unconditionally using the user's configured $python that inherits system
packages. Temporarily, we forced the use of meson source present via git
submodule or in the release tarball.
With this patch, we restore the ability to use a system-provided meson:
If Meson is installed in the build venv and meets our minimum version
requirements, we will use that Meson. This includes a system provided
meson, which would be visible via system-site packages inside the venv.
In the event that Meson is installed but *not for the chosen Python
interpreter*, not found, or of insufficient version, we will attempt to
install Meson from vendored source into the newly created Python virtual
environment. This vendored installation replaces both the git submodule
and tarball source mechanisms for sourcing meson.
As a result of this patch, the Python interpreter we use for both our
own build scripts *and* Meson extensions are always known to be the
exact same Python. As a further benefit, there will also be a symlink
available in the build directory that points to the correct, configured
python and can be used by e.g. manual tests to invoke the correct,
configured Python unambiguously.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-18-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch changes the configure script so that it always creates and
uses a python virtual environment unconditionally.
Meson bootstrapping is temporarily altered to force the use of meson
from git or vendored source (as packaged in our source tarballs). A
subsequent commit restores the use of distribution-vendored Meson.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-16-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
reader_count() is a performance bottleneck because the global
aio_context_list_lock mutex causes thread contention. Put this debugging
assertion behind a new ./configure --enable-debug-graph-lock option and
disable it by default.
The --enable-debug-graph-lock option is also enabled by the more general
--enable-debug option.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20230501173443.153062-1-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently when configure picks an ObjectiveC compiler it doesn't pay
attention to the cross-prefix. This isn't a big deal in practice,
because we only use ObjC on macos and you can't cross-compile to
macos. But it's a bit inconsistent.
Rearrange the handling of objcc in configure so that we do the
same thing that we do with cc and cxx. This means that the logic
for picking the ObjC compiler goes from:
if --objcc is specified, use that
otherwise if clang is available, use that
otherwise use $cc
to:
if --objcc is specified, use that
otherwise if --cross-prefix is specified, use ${cross_prefix}clang
otherwise if clang is available, use that
otherwise use $cc
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1185
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230418161554.744834-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The configure script used to compile some code which dereferences memory
with ubsan to verify the compiler can link with ubsan library which
detects dereferencing of uninitialized memory. However, as the
dereferenced memory was allocated in the same code, GCC can statically
detect the unitialized memory dereference and emit maybe-uninitialized
warning. If -Werror is set, this becomes an error, and the configure
script incorrectly thinks the error indicates the compiler cannot use
ubsan.
Fix this error by replacing the code with another function which adds
1 to a signed integer argument. This brings in ubsan to detect if it
causes signed integer overflow. As the value of the argument cannot be
statically determined, the new function is also immune to compiler
warnings.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230405070030.23148-1-akihiko.odaki@daynix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following patches are going to introduce meson wrap dependencies,
which is a solution to download and build missing dependencies.
The QEMU build-system will do network access with no way to avoid the
fallback. As a start, hardcode "--wrap-mode=nodownload" in configure, so
that wraps would be used only after a conscious decision of the user to
use "meson subprojects download" (before running configure).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230302131848.1527460-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
