Simulate XxC=0 and ERM=0 (current mode), so we can use the existing
helper function.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
The only FP instruction we can implement without an helper.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can reuse some of the infrastructure introduced for
VECTOR FP CONVERT FROM FIXED 64-BIT and friends.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Take care of reading/indicating the 32-bit elements.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can reuse most of the infrastructure introduced for
VECTOR FP CONVERT FROM FIXED 64-BIT and friends.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We can reuse most of the infrastructure added for VECTOR FP ADD.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
1. We'll reuse op_vcdg() for similar instructions later, prepare for
that.
2. We'll reuse vop64_2() later for other instructions.
We have to mangle the erm (effective rounding mode) and the m4 into
the simd_data(), and properly unmangle them again.
Make sure to restore the erm before triggering an exception.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Provide for all three instructions all four combinations of cc bit and
s bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
As far as I can see, there is only a tiny difference.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
1. We'll reuse op_vfa() for similar instructions later, prepare for
that.
2. We'll reuse vop64_3() for other instructions later.
3. Take care of modifying the vector register only if no trap happened.
- on traps, flags are not updated and no elements are modified
- traps don't modify the fpc flags
- without traps, all exceptions of all elements are merged
4. We'll reuse check_ieee_exc() later when we need the XxC flag.
We have to check for exceptions after processing each element.
Provide separate handlers for single/all element processing. We'll do
the same for all applicable FP instructions.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Vector floating-point instructions will require these functions, so
allow to use them from other files.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Handling is similar to data exceptions, however we can always store the
VXC into the lowore and the FPC:
z14 PoP, 6-20, "Vector-Exception Code"
When a vector-processing exception causes a pro-
gram interruption, a vector-exception code (VXC) is
stored at location 147, and zeros are stored at loca-
tions 144-146. The VXC is also placed in the DXC
field of the floating-point-control (FPC) register if bit
45 of control register 0 is one. When bit 45 of control
register 0 is zero and bit 46 of control register 0 is
one, the DXC field of the FPC register and the con-
tents of storage at location 147 are unpredictable.
Signed-off-by: David Hildenbrand <david@redhat.com>
The PoP (z14, 7-382) says:
Doublewords to the right of the doubleword in which the
highest-numbered facility bit is assigned for a model
may or may not be stored.
However, stack protection in certain binaries can't deal with that.
"gzip" example code:
f1b4: a7 08 00 03 lhi %r0,3
f1b8: b2 b0 f0 a0 stfle 160(%r15)
f1bc: e3 20 f0 b2 00 90 llgc %r2,178(%r15)
f1c2: c0 2b 00 00 00 01 nilf %r2,1
f1c8: b2 4f 00 10 ear %r1,%a0
f1cc: b9 14 00 22 lgfr %r2,%r2
f1d0: eb 11 00 20 00 0d sllg %r1,%r1,32
f1d6: b2 4f 00 11 ear %r1,%a1
f1da: d5 07 f0 b8 10 28 clc 184(8,%r15),40(%r1)
f1e0: a7 74 00 06 jne f1ec <file_read@@Base+0x1bc>
f1e4: eb ef f1 30 00 04 lmg %r14,%r15,304(%r15)
f1ea: 07 fe br %r14
f1ec: c0 e5 ff ff 9d 6e brasl %r14,2cc8 <__stack_chk_fail@plt>
In QEMU, we currently have:
max_bytes = 24
the code asks for (3 + 1) doublewords == 32 bytes.
If we write 32 bytes instead of only 24, and return "2 + 1" doublewords
("one less than the number of doulewords needed to contain all of the
facility bits"), the example code detects a stack corruption.
In my opinion, the code is wrong. However, it seems to work fine on
real machines. So let's limit storing to the minimum of the requested
and the maximum doublewords.
Cc: Stefan Liebler <stli@linux.ibm.com>
Cc: Andreas Krebbel <Andreas.Krebbel@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
used_stfl_bytes is 0, before initialized via prepare_stfl() on the
first invocation. We have to move the calculation of max_bytes after
prepare_stfl().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
CPU_DoubleU is primarily used to reinterpret between integer and floats.
We don't really need this functionality. So let's just keep it simple
and use an uint64_t.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
11e2bfef79 ("tcg/i386: Use MOVDQA for TCG_TYPE_V128 load/store")
revealed that the vregs are not aligned to 16 bytes. Align them to
16 bytes, to avoid segfault'ing on x86.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Unfortunately, there is no easy way to avoid looping over all elements
in v2. Provide specialized variants for !cc,!rt/!cc,rt/cc,!rt/cc,rt and
all element types. Especially for different values of rt, the compiler
might be able to optimize the code a lot.
Add s390_vec_write_element().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Similar to VECTOR FIND ELEMENT EQUAL. Core logic courtesy of Richard H.
Add s390_vec_read_element() that can deal with element sizes.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Complicated stuff. Provide two different helpers for CC an !CC handling.
We might want to add more helpers later.
zero_search() and match_index() are courtesy of Richard H.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Unroll loops in helpers for MSA logic instructions for better
performance.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-5-git-send-email-aleksandar.markovic@rt-rk.com>
Outline places for future MSA helpers to follow the same organization
as in MSA tests.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-4-git-send-email-aleksandar.markovic@rt-rk.com>
Fix block-comment-related issues reported by checkpatch for file
msa_helper.c.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-3-git-send-email-aleksandar.markovic@rt-rk.com>
Fix space-related format issues reported by checkpatch in file
msa_helper.c.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1559838440-9866-2-git-send-email-aleksandar.markovic@rt-rk.com>
The CPUID.01H:ECX[bit 3] ought to mirror the value of the MSR
IA32_MISC_ENABLE MWAIT bit and as userspace has control of them
both, it is userspace's job to configure both bits to match on
the initial setup.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1557813999-9175-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove several minor checkpatch warnings and errors.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-7-git-send-email-aleksandar.markovic@rt-rk.com>
Remove several minor checkpatch warnings and errors.
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1556018982-3715-6-git-send-email-aleksandar.markovic@rt-rk.com>
Add emulation of MMI instruction PCPYUD. The emulation is implemented
using TCG front end operations directly to achieve better performance.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-4-git-send-email-mateja.marjanovic@rt-rk.com>
Add emulation of MMI instruction PCPYLD. The emulation is implemented
using TCG front end operations directly to achieve better performance.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-3-git-send-email-mateja.marjanovic@rt-rk.com>
Add emulation of MMI instruction PCPYH. The emulation is implemented
using TCG front end operations directly to achieve better performance.
Signed-off-by: Mateja Marjanovic <mateja.marjanovic@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com>
Message-Id: <1551712405-2530-2-git-send-email-mateja.marjanovic@rt-rk.com>
This introduces a set of helpers when KVM is in use, which create the
KVM XIVE device, initialize the interrupt sources at a KVM level and
connect the interrupt presenters to the vCPU.
They also handle the initialization of the TIMA and the source ESB
memory regions of the controller. These have a different type under
KVM. They are 'ram device' memory mappings, similarly to VFIO, exposed
to the guest and the associated VMAs on the host are populated
dynamically with the appropriate pages using a fault handler.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20190513084245.25755-3-clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The gvec expanders take care of masking the shift amount
against the element width.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190518191430.21686-2-richard.henderson@linaro.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We were using set_cpu_vsr*() when we should have used get_cpu_vsr*().
Fixes: 8b3b2d75c7 ("introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers for VSR register access")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190509104912.6b754dff@kryten>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A few small optimisations:
In VSX_LOAD_SCALAR_DS() we can don't need to read the VSR via
get_cpu_vsrh().
Split VSX_VECTOR_LOAD_STORE() into two functions. Loads only need to
write the VSRs (set_cpu_vsr*()) and stores only need to read the VSRs
(get_cpu_vsr*())
Thanks to Mark Cave-Ayland for the suggestions.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190509103545.4a7fa71a@kryten>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
xxspltib raises a VMX or a VSX exception depending on the register
set it is operating on. We had a check, but it was backwards.
Fixes: f113283525 ("target-ppc: add xxspltib instruction")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190509061713.69490488@kryten>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A recent cleanup changed the pre zeroing of the result from 64 bit
to 32 bit operations:
- result.u64[i] = 0;
+ result.VsrW(i) = 0;
This corrupts the result.
Fixes: 60594fea29 ("target/ppc: remove various HOST_WORDS_BIGENDIAN hacks in int_helper.c")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190507004811.29968-9-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vslv and vsrv are broken on little endian, we append 00 to the
high byte not the low byte. Fix it by using the VsrB() accessor.
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190507004811.29968-6-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix a typo in xxbrq and xxbrw where we put both results into the lower
doubleword.
Fixes: 8b3b2d75c7 ("introduce get_cpu_vsr{l,h}() and set_cpu_vsr{l,h}() helpers for VSR register access")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190507004811.29968-3-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Fix a typo in xvxsigdp where we put both results into the lower
doubleword.
Fixes: dd977e4f45 ("target/ppc: Optimize x[sv]xsigdp using deposit_i64()")
Signed-off-by: Anton Blanchard <anton@ozlabs.org>
Message-Id: <20190507004811.29968-1-anton@ozlabs.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Boxuan Li <liboxuan@connect.hku.hk>
Message-Id: <20190430172842.27369-1-liboxuan@connect.hku.hk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
- semihosting re-factor (used in system tests)
- aarch64 and alpha system tests
- editorconfig tweak for .S
- some docker image updates
- iotests clean-up (without make check inclusion)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAlztYToACgkQ+9DbCVqe
KkQU9wf/Uv5qBgDn9MwcCt8tzHTX/i21QHwFLBbCmFoUwZjSridZ2KV6Ma3ig4mF
xY+8Cr5oZT186V+aD39K6KCZKqZRulIpRVNkOKXEfAAklUoAyQs95Wa8F8LtO1eG
vOtOYEdkXQQiAnlnQ+eaGiZQ2mpbCbREa10JrBhxp6iXh0PYcvtD7iAlOldqIvd2
hDRwOgTtYoiiKh6UdediAgQsRvv6oNPHFUOjWgrGxfhPWKbjCVKl7VS4furg9zux
j/S0E0xYKhj+JNq3arjiMUMl19TauCBQLrbQpphd1jOl1s7bELRjAuaKM60TVIbW
Hd2/PYbGnkpyUcJQh0Pr1cb4RMcznw==
=lvtu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-testing-next-280519-2' into staging
Various testing updates
- semihosting re-factor (used in system tests)
- aarch64 and alpha system tests
- editorconfig tweak for .S
- some docker image updates
- iotests clean-up (without make check inclusion)
# gpg: Signature made Tue 28 May 2019 17:26:34 BST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-testing-next-280519-2: (27 commits)
tests/qemu-iotests: re-format output to for make check-block
tests/qemu-iotests/group: Re-use the "auto" group for tests that can always run
Makefile.target: support per-target coverage reports
Makefile: include per-target build directories in coverage report
Makefile: fix coverage-report reference to BUILD_DIR
.travis.yml: enable aarch64-softmmu and alpha-softmmu tcg tests
tests/tcg/alpha: add system boot.S
tests/tcg/multiarch: expand system memory test to cover more
tests/tcg/minilib: support %c format char
tests/tcg/multiarch: move the system memory test
tests/tcg/aarch64: add system boot.S
editorconfig: add settings for .s/.S files
tests/tcg/multiarch: add hello world system test
tests/tcg/multiarch: add support for multiarch system tests
tests/docker: Test more components on the Fedora default image
tests/docker: add ubuntu 18.04
MAINTAINERS: update for semihostings new home
target/mips: convert UHI_plog to use common semihosting code
target/mips: only build mips-semi for softmmu
target/arm: correct return values for WRITE/READ in arm-semi
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJc6rmrAAoJENSXKoln91pleiIH/iII48dveAe846j+leRJzvq0
xwykZ+uc1gM8vwHjJmQL2iz8BSx9irYg68jNgZNw+0/7pOqKVkyDt7T9CMpNIgI/
xsbaX3ta90Rhw6Cnw9h99SsWJAg2Oq4Phv7yCIgDMoNmph/caZyd/95ThmmQ2MXr
BDOehxODcDyJAO3KIMODccuD6R0ofM2JKXUk2S5s7v1FjYm5fxfzOcx8P4P4lGP3
AB/k+iVMaEaZJWDHhPXte/5tF9aW8s39CUoe0BE/Cqje3ehLEY/6XxMamXiaWf/G
2taLvJ6lZ1T5nRmcTCBFfO4Sk3BEBeGlqF72nIlzeCJCe9SvISfwEhsHNkfsqiE=
=hSSg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-may-19-2019-v3' into staging
MIPS queue for May 19th, 2019 - v3
# gpg: Signature made Sun 26 May 2019 17:07:07 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-may-19-2019-v3:
BootLinuxSshTest: Test some userspace commands on Malta
target/mips: realign comments to fix checkpatch warnings
target/mips: add or remove space to fix checkpatch errors
linux-user: fix __NR_semtimedop undeclared error
mips: Decide to map PAGE_EXEC in map_address
target/mips: Refactor and fix INSERT.<B|H|W|D> instructions
target/mips: Refactor and fix COPY_U.<B|H|W> instructions
target/mips: Refactor and fix COPY_S.<B|H|W|D> instructions
target/mips: Fix MSA instructions ST.<B|H|W|D> on big endian host
target/mips: Fix MSA instructions LD.<B|H|W|D> on big endian host
target/mips: Make the results of MOD_<U|S>.<B|H|W|D> the same as on hardware
target/mips: Make the results of DIV_<U|S>.<B|H|W|D> the same as on hardware
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
David Hildenbrand