Use the FloatRoundMode enum type introduced in commit 3dede407cc
("softfloat: Name rounding mode enum") instead of 'unsigned int'.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201123204448.3260804-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-4-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-17-f4bug@amsat.org>
Nothing TCG specific there, move to common cpu code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-16-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-10-f4bug@amsat.org>
Move cpu_supports*() and cpu_set_exception_base() from
translate.c to cpu.c.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-9-f4bug@amsat.org>
PTC field has 8 bits, PVPE has 4. We plan to use the
"hw/registerfields.h" API with MIPS CPU definitions
(target/mips/cpu.h). Meanwhile we use magic 8 and 4.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-6-f4bug@amsat.org>
Do not initialize MT-related config register if the MT ASE
is not present.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-5-f4bug@amsat.org>
Do not initialize MT-related config registers if the MT ASE
is not present. As some functions access the 'mvp' structure,
we still zero-allocate it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-4-f4bug@amsat.org>
Instead of accessing CP0_Config3 directly and checking
the 'Multi-Threading Present' bit, introduce an helper
to simplify code review.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-3-f4bug@amsat.org>
mvp_init() doesn't require any CPU definition (beside the
information accessible via CPUMIPSState). Remove the unused
argument.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201204222622.2743175-2-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-3-f4bug@amsat.org>
Address translation is an architectural thing (not hardware
related). Move the helpers from hw/ to target/.
As physical address and KVM are specific to system mode
emulation, restrict this file to softmmu, so it doesn't
get compiled for user-mode emulation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-2-f4bug@amsat.org>
Introduce cpu_supports_isa() which takes a CPUMIPSState
argument, more useful at runtime when the CPU is created
(no need to call the extensive object_class_by_name()).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207215257.4004222-3-f4bug@amsat.org>
As cpu_supports_isa() / cpu_supports_cps_smp() take a 'cpu_type'
name argument, rename them cpu_type_supports_FEAT().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201207215257.4004222-2-f4bug@amsat.org>
As of Release 6, MMU type 4 is assigned to "Dual Variable-Page-Size
and Fixed-Page-Size TLBs" and type 2 to "Block Address Translation.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201201132817.2863301-4-f4bug@amsat.org>
The Loongson-3A4000 is a GS464V-based processor with MIPS MSA ASE:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg763059.html
Commit af868995e1 correctly set the 'MSA present' bit of Config3
register, but forgot to allow the MSA instructions decoding in
insn_flags, so executing them triggers a 'Reserved Instruction'.
Fix by adding the ASE_MSA mask to insn_flags.
Fixes: af868995e1 ("target/mips: Add Loongson-3 CPU definition")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <20201130102228.2395100-1-f4bug@amsat.org>
Currently MIPS exceptions are displayed as string in system-mode
emulation, but as number in user-mode.
Unify by extracting the current system-mode code as excp_name()
and use that in user-mode.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201119160536.1980329-1-f4bug@amsat.org>
Remove unused headers and add missing "qemu/log.h" since
qemu_log() is called.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-5-f4bug@amsat.org>
CP0 helpers are restricted to system-mode emulation.
Do not intent do build cp0_helper.c in user-mode (this
allows to simplify some #ifdef'ry).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <20201109090422.2445166-3-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201206233949.3783184-7-f4bug@amsat.org>
ads7846 is a touch-screen controller that is an input device rather
than a display device, so move it to the hw/input folder.
Signed-off-by: Gan Qixin <ganqixin@huawei.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20201115123503.1110665-1-ganqixin@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Relax the wording about line lengths a little bit; this goes with the
checkpatch changes to warn at 100 characters rather than 80.
(Compare the Linux kernel commit bdc48fa11e46f8; our coding style is
not theirs, but the rationale is good and applies to us too.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20201106112940.31300-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
I found some style problems while check the code using checkpatch.pl.
This commit fixs the issue below:
ERROR: open brace '{' following struct go on the same line
Signed-off-by: zhouyang <zhouyang789@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201209060735.2760943-1-zhouyang789@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
While this change helps triskaidekaphobic developers, it
is a good practice to avoid magic values and using constant
definitions instead.
Introduce the PAM_REGIONS_COUNT and use it. No logical change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Julia Suvorova <jusual@redhat.com>
Message-Id: <20201202132038.1276404-1-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Fix code style. Don't use '#' flag of printf format ('%#') in
format strings, use '0x' prefix instead
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Message-Id: <20201104133709.3326630-1-zhangxinhao1@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
I've recently switched employers and the current email address is out
of date.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201027060253.353054-1-michael.roth@amd.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The documentation for the icount documentation has some minor issues:
* in a couple of places it says "sleep=on|off" when in the context of the
sentence it means specifically "sleep=on"
* the synopsis line for the documentation has drifted out of sync
with the synopsis line in the DEF() macro (used for "-help" output)
* the synopsis line in the DEF() macro is missing a "][" between
the sleep= part and the rr= part
* the synopsis line doesn't indicate that rrsnapshot is an optional
part of the rr=mode,rrfile=filename subgrouping
* we don't document that sleep=on can't be used with shift=auto
or align=on
* the rr option description had some minor grammar and formatting
errors and was a bit terse
* in commit f1f4b57e88 in 2015 the documentation of the sleep=
suboption got added between the two paragraphs defining general
behaviour of the icount option. This meant that the second
paragraph talking about the behaviour of "this option" reads as
if it's talking about sleep=on, when it's really describing -icount
as a whole. The paragraph is better moved back up to above the
sleep= section.
* the summary text displayed in "-help" output didn't mention
the record-and-replay part
Fix these errors.
Fixes: https://bugs.launchpad.net/qemu/+bug/1774412
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20201121213506.15599-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Three trace events had a literal "0x" prefix but the 'len' values were
formatted in decimal base. Keep the prefix and format the numbers as
hex, as is usually the case for length of memory regions.
Signed-off-by: Dov Murik <dovmurik@linux.vnet.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20201103100745.160409-1-dovmurik@linux.vnet.ibm.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This code must not be used outside of KVM. Abort if it is.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200429082916.10669-3-f4bug@amsat.org>
Use @kernel.org address as the main communications end point. Update the
corresponding M-entries and .mailmap (for git shortlog translation).
Signed-off-by: Huacai Chen <chenhuacai@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <1607160121-9977-1-git-send-email-chenhuacai@kernel.org>
I found that there are many spelling errors in the comments of qemu/target/m68k.
I used spellcheck to check the spelling errors and found some errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daude<f4bug@amsat.org>
Reviewed-by: Laurent Vivier<laurent@vivier.eu>
Message-Id: <20201009064449.2336-9-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
They are unused since the target has been converted to TCG.
Fixes: e1f3808e03 ("Convert m68k target to TCG.")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201022203000.1922749-2-laurent@vivier.eu>
The handling of the GLUE (General Logic Unit) device is
currently open-coded. Make this into a proper QOM device.
This minor piece of modernisation gets rid of the free
floating qemu_irq array 'pic', which Coverity points out
is technically leaked when we exit the machine init function.
(The replacement glue device is not leaked because it gets
added to the sysbus, so it's accessible via that.)
Fixes: Coverity CID 1421883
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201106235109.7066-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The q800 board code connects both of the IRQ outputs of the ESCC
to the same pic[3] qemu_irq. Connecting two qemu_irqs outputs directly
to the same input is not valid as it produces subtly wrong behaviour
(for instance if both the IRQ lines are high, and then one goes
low, the PIC input will see this as a high-to-low transition
even though the second IRQ line should still be holding it high).
This kind of wiring needs an explicitly created OR gate; add one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20201106235109.7066-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()
-----BEGIN PGP SIGNATURE-----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=ISxg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- Support for FUSE exports
- Fix deadlock in bdrv_co_yield_to_drain()
- Use lock guard macros
- Some preparational patches for 64 bit block layer
- file-posix: Fix request extension to INT64_MAX in raw_do_pwrite_zeroes()
# gpg: Signature made Fri 11 Dec 2020 17:06:19 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (34 commits)
block: Fix deadlock in bdrv_co_yield_to_drain()
block: Fix locking in qmp_block_resize()
block: Simplify qmp_block_resize() error paths
block: introduce BDRV_MAX_LENGTH
block/io: bdrv_check_byte_request(): drop bdrv_is_inserted()
block/io: bdrv_refresh_limits(): use ERRP_GUARD
block/file-posix: fix workaround in raw_do_pwrite_zeroes()
can-host: Fix crash when 'canbus' property is not set
iotests/221: Discard image before qemu-img map
file-posix: check the use_lock before setting the file lock
iotests/308: Add test for FUSE exports
iotests: Enable fuse for many tests
iotests: Allow testing FUSE exports
iotests: Give access to the qemu-storage-daemon
storage-daemon: Call bdrv_close_all() on exit
iotests/287: Clean up subshell test image
iotests: Let _make_test_img guess $TEST_IMG_FILE
iotests: Restrict some Python tests to file
iotests/091: Use _cleanup_qemu instad of "wait"
iotests: Derive image names from $TEST_IMG
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If bdrv_co_yield_to_drain() is called for draining a block node that
runs in a different AioContext, it keeps that AioContext locked while it
yields and schedules a BH in the AioContext to do the actual drain.
As long as executing the BH is the very next thing that the event loop
of the node's AioContext does, this actually happens to work, but when
it tries to execute something else that wants to take the AioContext
lock, it will deadlock. (In the bug report, this other thing is a
virtio-scsi device running virtio_scsi_data_plane_handle_cmd().)
Instead, always drop the AioContext lock across the yield and reacquire
it only when the coroutine is reentered. The BH needs to unconditionally
take the lock for itself now.
This fixes the 'block_resize' QMP command on a block node that runs in
an iothread.
Cc: qemu-stable@nongnu.org
Fixes: eb94b81a94
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1903511
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201203172311.68232-4-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The drain functions assume that we hold the AioContext lock of the
drained block node. Make sure to actually take the lock.
Cc: qemu-stable@nongnu.org
Fixes: eb94b81a94
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201203172311.68232-3-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The only thing that happens after the 'out:' label is blk_unref(blk).
However, blk = NULL in all of the error cases, so instead of jumping to
'out:', we can just return directly.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201203172311.68232-2-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We are going to modify block layer to work with 64bit requests. And
first step is moving to int64_t type for both offset and bytes
arguments in all block request related functions.
It's mostly safe (when widening signed or unsigned int to int64_t), but
switching from uint64_t is questionable.
So, let's first establish the set of requests we want to work with.
First signed int64_t should be enough, as off_t is signed anyway. Then,
obviously offset + bytes should not overflow.
And most interesting: (offset + bytes) being aligned up should not
overflow as well. Aligned to what alignment? First thing that comes in
mind is bs->bl.request_alignment, as we align up request to this
alignment. But there is another thing: look at
bdrv_mark_request_serialising(). It aligns request up to some given
alignment. And this parameter may be bdrv_get_cluster_size(), which is
often a lot greater than bs->bl.request_alignment.
Note also, that bdrv_mark_request_serialising() uses signed int64_t for
calculations. So, actually, we already depend on some restrictions.
Happily, bdrv_get_cluster_size() returns int and
bs->bl.request_alignment has 32bit unsigned type, but defined to be a
power of 2 less than INT_MAX. So, we may establish, that INT_MAX is
absolute maximum for any kind of alignment that may occur with the
request.
Note, that bdrv_get_cluster_size() is not documented to return power
of 2, still bdrv_mark_request_serialising() behaves like it is.
Also, backup uses bdi.cluster_size and is not prepared to it not being
power of 2.
So, let's establish that Qemu supports only power-of-2 clusters and
alignments.
So, alignment can't be greater than 2^30.
Finally to be safe with calculations, to not calculate different
maximums for different nodes (depending on cluster size and
request_alignment), let's simply set QEMU_ALIGN_DOWN(INT64_MAX, 2^30)
as absolute maximum bytes length for Qemu. Actually, it's not much less
than INT64_MAX.
OK, then, let's apply it to block/io.
Let's consider all block/io entry points of offset/bytes:
4 bytes/offset interface functions: bdrv_co_preadv_part(),
bdrv_co_pwritev_part(), bdrv_co_copy_range_internal() and
bdrv_co_pdiscard() and we check them all with bdrv_check_request().
We also have one entry point with only offset: bdrv_co_truncate().
Check the offset.
And one public structure: BdrvTrackedRequest. Happily, it has only
three external users:
file-posix.c: adopted by this patch
write-threshold.c: only read fields
test-write-threshold.c: sets obviously small constant values
Better is to make the structure private and add corresponding
interfaces.. Still it's not obvious what kind of interface is needed
for file-posix.c. Let's keep it public but add corresponding
assertions.
After this patch we'll convert functions in block/io.c to int64_t bytes
and offset parameters. We can assume that offset/bytes pair always
satisfy new restrictions, and make
corresponding assertions where needed. If we reach some offset/bytes
point in block/io.c missing bdrv_check_request() it is considered a
bug. As well, if block/io.c modifies a offset/bytes request, expanding
it more then aligning up to request_alignment, it's a bug too.
For all io requests except for discard we keep for now old restriction
of 32bit request length.
iotest 206 output error message changed, as now test disk size is
larger than new limit. Add one more test case with new maximum disk
size to cover too-big-L1 case.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-5-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move bdrv_is_inserted() calls into callers.
We are going to make bdrv_check_byte_request() a clean thing.
bdrv_is_inserted() is not about checking the request, it's about
checking the bs. So, it should be separate.
With this patch we probably change error path for some failure
scenarios. But depending on the fact that querying too big request on
empty cdrom (or corrupted qcow2 node with no drv) will result in EIO
and not ENOMEDIUM would be very strange. More over, we are going to
move to 64bit requests, so larger requests will be allowed anyway.
More over, keeping in mind that cdrom is the only driver that has
.bdrv_is_inserted() handler it's strange that we should care so much
about it in generic block layer, intuitively we should just do read and
write, and cdrom driver should return correct errors if it is not
inserted. But it's a work for another series.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-4-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This simplifies following commit.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-3-vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We should not set overlap_bytes:
1. Don't worry: it is calculated by bdrv_mark_request_serialising() and
will be equal to or greater than bytes anyway.
2. If the request was already aligned up to some greater alignment,
than we may break things: we reduce overlap_bytes, and further
bdrv_mark_request_serialising() may not help, as it will not restore
old bigger alignment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20201203222713.13507-2-vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
