..just like the rest of the displayed ESR register. Otherwise people
might scratch their heads if a not obviously hex number is displayed
for the EC field.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Paths through the softmmu code during code generation now need to be audited
to check for double locking of tb_lock. In particular, VMEXIT can take tb_lock
through cpu_vmexit -> cpu_x86_update_cr4 -> tlb_flush.
To avoid this, split VMEXIT delivery in two parts, similar to what is done with
exceptions. cpu_vmexit only records the VMEXIT exit code and information, and
cc->do_interrupt can then deliver it when it is safe to take the lock.
Reported-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Suggested-by: Richard Henderson <rth@twiddle.net>
Tested-by: Alexander Boettcher <alexander.boettcher@genode-labs.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Hold BQL when accessing timer which can cause interrupts
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
The translation code uses cpu_ld*_code which can trigger a tlb_fill
which if it fails will erroneously attempts a fault resolution. This
never works during translation as the TB being generated hasn't been
added yet. The target should have checked retaddr before calling
cpu_restore_state but for those that have yet to be fixed we do it
here to avoid a recursive tb_lock() under MTTCG's new locking regime.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Make sure we have the BQL held when processing interrupts.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Helpers that can trigger IO events (including interrupts) need to be
protected by the BQL. I've updated all the helpers that call into an
ioinst_handle_* functions.
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
IRQ modification is part of device emulation and should be done while
the BQL is held to prevent races when MTTCG is enabled. This adds
assertions in the hw emulation layer and wraps the calls from helpers
in the BQL.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
While we may fail the memory ordering check later that can be
confusing. So in cases where TARGET_SUPPORT_MTTCG has yet to be
defined we should say so specifically.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
This suppresses the incorrect warning when forcing MTTCG for x86
guests on x86 hosts. A future patch will still warn when
TARGET_SUPPORT_MTTCG hasn't been defined for the guest (which is still
pending for x86).
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
The sense of the test was inverted. Make it simple, if icount is
enabled then we disabled MTTCG by default. If the user tries to force
MTTCG upon us then we tell them "no".
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Additionally permit non-negative integers as key components. A
dictionary's keys must either be all integers or none. If all keys
are integers, convert the dictionary to a list. The set of keys must
be [0,N].
Examples:
* list.1=goner,list.0=null,list.1=eins,list.2=zwei
is equivalent to JSON [ "null", "eins", "zwei" ]
* a.b.c=1,a.b.0=2
is inconsistent: a.b.c clashes with a.b.0
* list.0=null,list.2=eins,list.2=zwei
has a hole: list.1 is missing
Similar design flaw as for objects: there is no way to denote an empty
list. While interpreting "key absent" as empty list seems natural
(removing a list member from the input string works when there are
multiple ones, so why not when there's just one), it doesn't work:
"key absent" already means "optional list absent", which isn't the
same as "empty list present".
Update the keyval object visitor to use this a.0 syntax in error
messages rather than the usual a[0].
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488317230-26248-25-git-send-email-armbru@redhat.com>
[Off-by-one fix squashed in, as per Kevin's review]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-24-git-send-email-armbru@redhat.com>
Incorrect option
-blockdev node-name=foo,driver=file,filename=foo.img,aio.unmap=on
is rejected with "Invalid parameter type for 'aio', expected: string".
To make sense of this, you almost have to translate it into the
equivalent QMP command
{ "execute": "blockdev-add", "arguments": { "node-name": "foo", "driver": "file", "filename": "foo.img", "aio": { "unmap": true } } }
Improve the error message to "Parameters 'aio.*' are unexpected".
Take care not to confuse the case "unexpected nested parameters"
(i.e. the object is a QDict or QList) with the case "non-string scalar
parameter". The latter is a misuse of the visitor, and should perhaps
be an assertion. Note that test-qobject-input-visitor exercises this
misuse in test_visitor_in_int_keyval(), test_visitor_in_bool_keyval()
and test_visitor_in_number_keyval().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-23-git-send-email-armbru@redhat.com>
The new command line option -blockdev works like QMP command
blockdev-add.
The option argument may be given in JSON syntax, exactly as in QMP.
Example usage:
-blockdev '{"node-name": "foo", "driver": "raw", "file": {"driver": "file", "filename": "foo.img"} }'
The JSON argument doesn't exactly blend into the existing option
syntax, so the traditional KEY=VALUE,... syntax is also supported,
using dotted keys to do the nesting:
-blockdev node-name=foo,driver=raw,file.driver=file,file.filename=foo.img
This does not yet support lists, but that will be addressed shortly.
Note that calling qmp_blockdev_add() (say via qmp_marshal_block_add())
right away would crash. We need to stash the configuration for later
instead. This is crudely done, and bypasses QemuOpts, even though
storing configuration is what QemuOpts is for. Need to revamp option
infrastructure to support QAPI types like BlockdevOptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-22-git-send-email-armbru@redhat.com>
Until now, key components are separated by '.'. This leaves little
room for evolving the syntax, and is incompatible with the __RFQDN_
prefix convention for downstream extensions.
Since key components will be commonly used as QAPI member names by the
QObject input visitor, we can just as well borrow the QAPI naming
rules here: letters, digits, hyphen and period starting with a letter,
with an optional __RFQDN_ prefix for downstream extensions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-20-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-19-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-18-git-send-email-armbru@redhat.com>
qmp_query_qmp_schema() parses qmp_schema_json[] with
qobject_from_json(). This must not fail, so pass &error_abort.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-17-git-send-email-armbru@redhat.com>
qmp_deserialize() calls qobject_from_json() ignoring errors. It
passes the result to qobject_input_visitor_new(), which asserts it's
not null. Therefore, we can just as well pass &error_abort to
qobject_from_json().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-16-git-send-email-armbru@redhat.com>
Pass &error_abort with known-good input. Else pass &err and check
what comes back. This demonstrates that the parser fails silently for
many errors.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-15-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-14-git-send-email-armbru@redhat.com>
The next few commits will put the errors to use where appropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-13-git-send-email-armbru@redhat.com>
visitor_input_test_init_internal() parses test input with
qobject_from_jsonv(), and asserts it succeeds. Pass &error_abort for
good measure.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-12-git-send-email-armbru@redhat.com>
Ignoring errors first, then asserting success is suboptimal. Pass
&error_abort instead, so we abort earlier, and hopefully get more
useful clues on what's wrong.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-11-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-10-git-send-email-armbru@redhat.com>
The next few commits will put the errors to use where appropriate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-9-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1488317230-26248-8-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-7-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-6-git-send-email-armbru@redhat.com>
Currently the QObjectInputVisitor assumes that all scalar values are
directly represented as the final types declared by the thing being
visited. i.e. it assumes an 'int' is using QInt, and a 'bool' is using
QBool, etc. This is good when QObjectInputVisitor is fed a QObject
that came from a JSON document on the QMP monitor, as it will strictly
validate correctness.
To allow QObjectInputVisitor to be reused for visiting a QObject
originating from keyval_parse(), an alternative mode is needed where
all the scalars types are represented as QString and converted on the
fly to the final desired type.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1475246744-29302-8-git-send-email-berrange@redhat.com>
Rebased, conflicts resolved, commit message updated to refer to
keyval_parse(). autocast replaced by keyval in identifiers,
noautocast replaced by fail in tests.
Fix qobject_input_type_uint64_keyval() not to reject '-', for QemuOpts
compatibility: replace parse_uint_full() by open-coded
parse_option_number(). The next commit will add suitable tests.
Leave out the fancy ERANGE error reporting for now, but add a TODO
comment. Add it qobject_input_type_int64_keyval() and
qobject_input_type_number_keyval(), too.
Open code parse_option_bool() and parse_option_size() so we have to
call qobject_input_get_name() only when actually needed. Again, leave
out ERANGE error reporting for now.
QAPI/QMP downstream extension prefixes __RFQDN_ don't work, because
keyval_parse() splits them at '.'. This will be addressed later in
the series.
qobject_input_type_int64_keyval(), qobject_input_type_uint64_keyval(),
qobject_input_type_number_keyval() tweaked for style.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-5-git-send-email-armbru@redhat.com>
keyval_parse() parses KEY=VALUE,... into a QDict. Works like
qemu_opts_parse(), except:
* Returns a QDict instead of a QemuOpts (d'oh).
* Supports nesting, unlike QemuOpts: a KEY is split into key
fragments at '.' (dotted key convention; the block layer does
something similar on top of QemuOpts). The key fragments are QDict
keys, and the last one's value is updated to VALUE.
* Each key fragment may be up to 127 bytes long. qemu_opts_parse()
limits the entire key to 127 bytes.
* Overlong key fragments are rejected. qemu_opts_parse() silently
truncates them.
* Empty key fragments are rejected. qemu_opts_parse() happily
accepts empty keys.
* It does not store the returned value. qemu_opts_parse() stores it
in the QemuOptsList.
* It does not treat parameter "id" specially. qemu_opts_parse()
ignores all but the first "id", and fails when its value isn't
id_wellformed(), or duplicate (a QemuOpts with the same ID is
already stored). It also screws up when a value contains ",id=".
* Implied value is not supported. qemu_opts_parse() desugars "foo" to
"foo=on", and "nofoo" to "foo=off".
* An implied key's value can't be empty, and can't contain ','.
I intend to grow this into a saner replacement for QemuOpts. It'll
take time, though.
Note: keyval_parse() provides no way to do lists, and its key syntax
is incompatible with the __RFQDN_ prefix convention for downstream
extensions, because it blindly splits at '.', even in __RFQDN_. Both
issues will be addressed later in the series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1488317230-26248-4-git-send-email-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-3-git-send-email-armbru@redhat.com>
qemu_opts_parse() interprets "no" as negated empty key. Consistent
with its acceptance of empty keys elsewhere, whatever that's worth.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <1488317230-26248-2-git-send-email-armbru@redhat.com>
When assembling 'given' from the instruction bytes, C's integer
promotion rules mean we may promote an unsigned char to a signed
integer before shifting it, and then sign extend to a 64-bit long,
which can set the high bits of the long. The code doesn't in fact
care about the high bits if the long is 64 bits, but this is
surprising, so don't do it.
(Spotted by Coverity, CID 1005404.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1488556233-31246-7-git-send-email-peter.maydell@linaro.org
In the cris disassembler we were using 'unsigned long' to calculate
addresses which are supposed to be 32 bits. This meant that we might
accidentally sign extend or calculate a value that was outside the 32
bit range of the guest CPU. Use 'uint32_t' instead so we give the
right answers on 64-bit hosts.
(Spotted by Coverity, CID 1005402, 1005403.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1488556233-31246-6-git-send-email-peter.maydell@linaro.org
In read_insn_microblaze() we assemble 4 bytes into an 'unsigned
long'. If 'unsigned long' is 64 bits and the high byte has its top
bit set, then C's implicit conversion from 'unsigned char' to 'int'
for the shift will result in an unintended sign extension which sets
the top 32 bits in 'inst'. Add casts to prevent this. (Spotted by
Coverity, CID 1005401.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1488556233-31246-5-git-send-email-peter.maydell@linaro.org
In get_field(), we take an 'unsigned char' value and shift it left,
which implicitly promotes it to 'signed int', before ORing it into an
'unsigned long' type. If 'unsigned long' is 64 bits then this will
result in a sign extension and the top 32 bits of the result will be
1s. Add explicit casts to unsigned long before shifting to prevent
this.
(Spotted by Coverity, CID 715697.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 1488556233-31246-4-git-send-email-peter.maydell@linaro.org
In a code path where we hit an internal disassembler error, execution
would subsequently attempt to dereference a NULL pointer. This
should never happen, but avoid the crash.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1488556233-31246-3-git-send-email-peter.maydell@linaro.org
Coverity complains (CID 1302705) that the "fr0" part of the ?: in
fput_fp_reg_r() is dead. This looks like cut-n-paste error from
fput_fp_reg(); delete the dead code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1488556233-31246-2-git-send-email-peter.maydell@linaro.org
bdrv_set_backing_hd failure needn't be abort. Since we already have
error parameter, use it.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We have an errp and bdrv_root_attach_child can fail permission check,
error_abort is not the best choice here.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QAPI type SocketAddressFlat differs from SocketAddress pointlessly:
the discriminator value for variant InetSocketAddress is 'tcp' instead
of 'inet'. Rename.
The type is so far only used by the Gluster block drivers. Take care
to keep 'tcp' working in things like -drive's file.server.0.type=tcp.
The "gluster+tcp" URI scheme in pseudo-filenames stays the same.
blockdev-add changes, but it has changed incompatibly since 2.8
already.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As its documentation says, it's not specific to Gluster. Rename it,
as I'm going to use it for something else.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To reproduce, run
$ valgrind qemu-system-x86_64 --nodefaults -S --drive driver=gluster,volume=testvol,path=/a/b/c,server.0.type=xxx
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_gluster_glfs_init() passes the names of QAPI enumeration type
SocketTransport to glfs_set_volfile_server(). Works, because they
were chosen to match. But the coupling is artificial. Use the
appropriate literal strings instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
