Since revision 5228, we don't register the memory hole (0xa00000 to
0xfffff) anymore. As a consequence, we don't need to register it again
as unassigned.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5522 c046a42c-6fe2-441c-8c8c-71466251a162
* Drop DMA poll mode. Instead immediately push rx frames straight into the DMA
without waiting for DMA_run to poll them of the fifo.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5520 c046a42c-6fe2-441c-8c8c-71466251a162
could be expanded). This also fixes the bug with mips elf64 symbols
in current Qemu trunk.
* Use quicksort and binary search for symbol lookup.
* Remove unneeded entries from symbol table. This reduced a typical table
size (linux mips kernel) from 1764487 to 11656 entries.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5510 c046a42c-6fe2-441c-8c8c-71466251a162
If the first case does not succeed, then the usb scanning code will leak file
descriptors on every scan.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5509 c046a42c-6fe2-441c-8c8c-71466251a162
Make "host:" usb devices work again on systems that have the
file /proc/bus/usb/devices. This was broken in r5441 due to
incorrect logic for the USB_FS_SYS case in usb_host_scan().
Signed-off-by: Bjorn Danielsson <bdq@dax.nu>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5507 c046a42c-6fe2-441c-8c8c-71466251a162
Define XER bits as a single register and access them individually to
avoid defining 5 32-bit registers (TCG doesn't permit to map 8-bit
registers).
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5500 c046a42c-6fe2-441c-8c8c-71466251a162
this patch allows to fully use a tape device connected to qemu through
the scsi-generic interface.
Previous patch introduced tape SCSI commands management, this one
improve error case management:
- the SCSI controller command completion must be called with the status
value, not the sense value. In the case of scsi-generic, the SCSI status
is given by the field status of sg_io_hdr_t (the value is left shifted
by one regarding status codes defined in /usr/include/scsi/scsi.h)
- when a read is aborted due to a mark/EOF/EOD/EOM, the len reported to
controller can be 0. LSI controller emulation doesn't know how to manage
this. A workaround found is to call the completion routine with
SCSI_REASON_DONE just after calling it with SCSI_REASON_DATA with len=0.
This patch also manages correctly the block size of the tape device.
This patch has been tested with a real tape device "HP C5683A", linux
guest (debian etch) and tools like "mt", "tar" and "btape".
Windows guest is not better supported than before...
Signed-off-by: Laurent Vivier <Laurent.Vivier@bull.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5497 c046a42c-6fe2-441c-8c8c-71466251a162
With SVM the TLB supports tagging to distinguish TLB entries from
different virtual CPUs. This tag is called an ASID. The amount of ASIDs is
given in EBX of the SVM-CPUID-leaf. Currently we return 0, which might
break hypervisors. Let's better return something >0 here, say 0x10.
Since we're flushing the complete TLB on every VM entry and exit we're not
making use of the ASID information anyways.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5496 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds a CPU definition for the Core Duo CPU. I tried to
resemble the original as closely as possible and document what features
are missing still. This patch enables the use of a recent CPU definition
on 32 bit platforms.
It also fixes two issues that went along the line:
- invalid xlevel in core2duo spec
While looking though the CPUIDs again, I found that xlevel is actually 8.
- non-PSE36 support
The CoreDuo CPUID does not expose the PSE36 capability, but CPUID
0x80000008 is tied to 36 bits. This broke Windows XP installation for
me, so I just set it to 32 bits width when PSE36 is not available. The
original CPU also exposes 32 bit width in CPUID 0x80000008.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5488 c046a42c-6fe2-441c-8c8c-71466251a162
O_DSYNC isn't available on OS X.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5486 c046a42c-6fe2-441c-8c8c-71466251a162
This patch changes the cache= option to accept none, writeback, or writethough
to control the host page cache behavior. By default, writethrough caching is
now used which internally is implemented by using O_DSYNC to open the disk
images. When using -snapshot, writeback is used by default since data integrity
it not at all an issue.
cache=none has the same behavior as cache=off previously. The later syntax is
still supported by now deprecated. I also cleaned up the O_DIRECT
implementation to avoid many of the #ifdefs.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5485 c046a42c-6fe2-441c-8c8c-71466251a162
glibc's structs dirent and dirent64 is different from in-kernel dirent
and dirent64. Kernel headers doesn't provide structs dirent(64) any
more. So we should add it to qemu headers.
To avoid conflict with glibc it called struct linux_dirent(64).
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5480 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a tcp protocol for live migration. It can be used as
follows:
qemu-system-x86_64 -hda ~/images/linux-test.img -monitor stdio
<vm runs for a while>
(qemu) migrate tcp:localhost:1025
On the same system:
qemu-system-x86_64 -hda ~/images/linux-test.img -incoming
tcp:localhost:1025
The monitor can be interacted with while waiting for an incoming live
migration.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5478 c046a42c-6fe2-441c-8c8c-71466251a162
This patch adds an ethernet announce function that will minimize downtime
when doing a live migration. This code originates from KVM.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5477 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a command line parameter and monitor command for starting
a live migration. The next patch will provide an example of how to use these
parameters.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5476 c046a42c-6fe2-441c-8c8c-71466251a162
This patch introduces a buffered QEMUFile wrapper. This allows QEMUFile's to be
rate limited. It also makes it easier to implement a QEMUFile that is
asynchronous since the current QEMUFile API requires that all reads and writes
be synchronous.
The only real non-obvious part of the API is the "frozen" concept. If the
backend returns EAGAIN, the QEMUFile is said to be "frozen". This means no
additional output will be sent to the backend until the file is unfrozen.
qemu_file_put_notify can be used to unfreeze a frozen file.
A synchronous interface is also provided to wait for an unfreeze event. This is
used during the final part of live migration when the VM is no longer running.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5475 c046a42c-6fe2-441c-8c8c-71466251a162
This patch allows QEMUFile's read and write operations to return
negative error codes. This is necessary to detect things like closed
streams during live migration.
It also removes unused code for QEMUFileFD write path. Finally, it
makes sure to avoid attempting to flush an output buffer if the file
is only being used for input. This was spotted by Uri Lublin.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5474 c046a42c-6fe2-441c-8c8c-71466251a162
