The upcoming support of in-kernel XICS will redefine migration callbacks
for both ICS and ICP so classes and callback pointers are added.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
On the real hardware, RTAS is called in real mode and therefore
top 4 bits of the address passed in the call are ignored.
So does the patch.
This converts h_rtas() to use existing rtas_ld() handlers.
This fixed rtas_ld()/rtas_st() to ignore top 4 bits.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
# By Paolo Bonzini (10) and others
# Via Paolo Bonzini
* bonzini/iommu-for-anthony:
exec: remove qemu_safe_ram_ptr
icount: make it thread-safe
icount: document (future) locking rules for icount
icount: prepare the code for future races in calling qemu_clock_warp
icount: reorganize icount_warp_rt
icount: use cpu_get_icount() directly
timer: add timer_mod_anticipate and timer_mod_anticipate_ns
timer: extract timer_mod_ns_locked and timerlist_rearm
timer: make qemu_clock_enable sync between disable and timer's cb
qemu-thread: add QemuEvent
timer: protect timers_state's clock with seqlock
seqlock: introduce read-write seqlock
vga: Mark relevant portio lists regions as coalesced MMIO flushing
cirrus: Mark vga io region as coalesced MMIO flushing
portio: Allow to mark portio lists as coalesced MMIO flushing
compatfd: switch to QemuThread
memory: fix 128 arithmetic in info mtree
Message-id: 1382024935-28297-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
These let a user anticipate the deadline of a timer, atomically with
other sites that call the function. This helps avoiding complicated
lock hierarchies.
Reviewed-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After disabling the QemuClock, we should make sure that no QemuTimers
are still in flight. To implement that with light overhead, we resort
to QemuEvent. The caller of disabling will wait on QemuEvent of each
timerlist.
Note, qemu_clock_enable(foo,false) can _not_ be called from timer's cb.
Also, the callers of qemu_clock_enable() should be protected by the BQL.
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This emulates Win32 manual-reset events using futexes or conditional
variables. Typical ways to use them are with multi-producer,
single-consumer data structures, to test for a complex condition whose
elements come from different threads:
for (;;) {
qemu_event_reset(ev);
... test complex condition ...
if (condition is true) {
break;
}
qemu_event_wait(ev);
}
Or more efficiently (but with some duplication):
... evaluate condition ...
while (!condition) {
qemu_event_reset(ev);
... evaluate condition ...
if (!condition) {
qemu_event_wait(ev);
... evaluate condition ...
}
}
QemuEvent provides a very fast userspace path in the common case when
no other thread is waiting, or the event is not changing state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU_CLOCK_VIRTUAL may be read outside BQL. This will make its
foundation, i.e. cpu_clock_offset exposed to race condition.
Using private lock to protect it.
After this patch, reading QEMU_CLOCK_VIRTUAL is thread safe
unless use_icount is true, in which case the existing callers
still rely on the BQL.
Lock rule: private lock innermost, ie BQL->"this lock"
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Seqlock implementation for QEMU. Usage idiom
reader:
do {
start = seqlock_read_begin(&sl);
...
} while (seqlock_read_retry(&sl, start));
writer:
seqlock_write_lock(&sl);
...
seqlock_write_unlock(&sl);
initialization:
seqlock_init(QemuSeqLock *sl, QemuMutex *mutex)
mutex could be NULL if the caller will provide its own protection
for concurrent write sides (typically using the BQL).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will enable us to remove all remaining explicit calls of
qemu_flush_coalesced_mmio_buffer in IO handlers.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch fixes spice display initialization to handle
multihead properly.
spice-core now keeps track of which QemuConsole has a spice
display channel attached to it and which has not. It also
manages display channel ids.
spice-display looks at all QemuConsoles and will pick up any
graphic console not yet bound to a spice channel (which in practice
are all non-qxl graphic devices).
Result is that
(a) you'll get a spice client window for each graphical device
now (first only without this patch), and
(b) mixing qxl and non-qxl vga cards works properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
phys_mem_alloc and its assigned values qemu_anon_ram_alloc and
legacy_s390_alloc must have identical argument lists.
legacy_s390_alloc uses the size parameter to call mmap, so size_t is
good enough for all of them.
This patch fixes compiler errors on i686 Linux hosts:
CC alpha-softmmu/exec.o
exec.c:752:51: error:
initialization from incompatible pointer type [-Werror]
exec.c: In function 'qemu_ram_alloc_from_ptr':
exec.c:1139:32: error:
comparison of distinct pointer types lacks a cast [-Werror]
exec.c: In function 'qemu_ram_remap':
exec.c:1283:21: error:
comparison of distinct pointer types lacks a cast [-Werror]
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1380481005-32399-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This adds C code for generating ACPI tables at runtime,
imported from seabios git tree
commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd
Although ACPI tables come from a system BIOS on real hw,
it makes sense that the ACPI tables are coupled with the
virtual machine, since they have to abstract the x86 machine to
the OS's.
This is widely desired as a way to avoid the churn
and proliferation of QEMU-specific interfaces
associated with ACPI tables in bios code.
Notes:
As BIOS can reprogram devices prior to loading
ACPI tables, we pre-format ACPI tables but defer loading
hardware configuration there until tables are loaded.
The code structure was intentionally kept as close
to the seabios original as possible, to simplify
comparison and making sure we didn't lose anything
in translation.
Minor code duplication results, to help ensure there are no functional
regressions, I think it's better to merge it like this and do more code
changes in follow-up patches.
Cross-version compatibility concerns have been addressed:
ACPI tables are exposed to guest as FW_CFG entries.
When running with -M 1.5 and older, this patch disables ACPI
table generation, and doesn't expose ACPI
tables to guest.
As table content is likely to change over time,
the following measures are taken to simplify
cross-version migration:
- All tables besides the RSDP are packed in a single FW CFG entry.
This entry size is currently 23K. We round it up to 64K
to avoid too much churn there.
- Tables are placed in special ROM blob (not mapped into guest memory)
which is automatically migrated together with the guest, same
as BIOS code.
- Offsets where hardware configuration is loaded in ACPI tables
are also migrated, this is in case future ACPI changes make us
rearrange the tables in memory.
This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.
Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:
src/acpi-dsdt-cpu-hotplug.dsl
src/acpi-dsdt-dbug.dsl
src/acpi-dsdt-hpet.dsl
src/acpi-dsdt-isa.dsl
src/acpi-dsdt-pci-crs.dsl
src/acpi.c
src/acpi.h
src/ssdt-misc.dsl
src/ssdt-pcihp.dsl
src/ssdt-proc.dsl
tools/acpi_extract.py
tools/acpi_extract_preprocess.py
Each one of the listed people agreed to the following:
> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Dave Frodin <dave.frodin@se-eng.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Kevin O'Connor <kevin@koconnor.net>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Magnus Christensson <magnus.christensson@intel.com>
Acked-by: Hu Tao <hutao@cn.fujitsu.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add API to find HPET using QOM.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add API to find pvpanic device and get its io port.
Will be used to fill in guest info structure.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds APIs that will be used to fill in
acpi tables, implemented using QOM,
to various ich9 components.
Some information is still missing in QOM,
so we fall back on lookups by type instead.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This adds APIs that will be used to fill in guest acpi tables.
Some required information is still lacking in QOM, so we
fall back on lookups by type and returning explicit types.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This defines a structure that will be used to fill in acpi tables
where relevant properties are not yet available using QOM.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid a bit of code duplication, make
max file path constant reusable.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Address is already exposed, expose size for symmetry.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Useful to make it accessible through QOM.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Callers pass in the address so it's helpful for
them to be able to decode it.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make it possible to test unmapped status through QMP.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Support ROM blobs not mapped into guest memory:
same as ROM files really but use caller's buffer.
Support invoking callback on access and
return memory pointer making it easier
for caller to update memory if necessary.
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make it easy to add read-only helpers for simple
integer properties in memory.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
now that a typedef for struct Error is available,
use it in qom/object.h to match coding style rules.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qapi/error.h is simple enough to be included in qom/object.h
direcly and prepares qom/object.h to use Error typedef.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Instead of exposing the the irq field,
pci wrappers to qemu_set_irq or qemu_irq_*
can be used.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The fields hpev_intx and aer_intx were removed because
both AER and hot-plug events must use device's interrupt.
Assert/deassert interrupts using pci irq wrappers instead.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Interrupt pin is selected and saved into PCI_INTERRUPT_PIN
register during device initialization. Devices should not call
directly qemu_set_irq and specify the INTx pin on each call.
Added pci_* wrappers to replace qemu_set_irq, qemu_irq_raise,
qemu_irq_lower and qemu_irq_pulse, setting the irq
based on PCI_INTERRUPT_PIN.
Added pci_allocate_irq wrapper to be used by devices that
still need PCIDevice infrastructure to assert irqs.
Renamed a static method which was named already pci_set_irq.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qemu_allocate_irq returns a single qemu_irq.
The interface allows to specify an interrupt number.
qemu_free_irq frees it.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A MemoryRegion with negative priority was created and
it spans over all the pci address space.
It "intercepts" the accesses to unassigned pci
address space and will follow the pci spec:
1. returns -1 on read
2. does nothing on write
Note: setting the RECEIVED MASTER ABORT bit in the STATUS register
of the device that initiated the transaction will be
implemented in another series
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When memory regions overlap, priority can be used to specify
which of them takes priority. By making the priority values signed
rather than unsigned, we make it more convenient to implement
a situation where one "background" region should appear only
where no other region exists: rather than having to explicitly
specify a high priority for all the other regions, we can let them take
the default (zero) priority and specify a negative priority for the
background region.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# By Mark Wu (2) and Tomoki Sekiyama (1)
# Via Michael Roth
* mdroth/qga-pull-2013-10-10:
qemu-ga: Extend 'guest-info' command to expose flag 'success-response'
qemu-ga: Add interface to traverse the qmp command list by QmpCommand
qemu-ga: execute fsfreeze-freeze in reverse order of mounts
Message-id: 1381435782-25524-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-pull:
exec: Add both big- and little-endian memory helpers
tcg: Add qemu_ld_st_i32/64
tcg: Add TCGMemOp
configure: Remove CONFIG_QEMU_LDST_OPTIMIZATION
tcg: Add tcg-be-ldst.h
tcg: Add tcg-be-null.h
exec: Delete is_tcg_gen_code and GETRA_EXT
tcg-aarch64: Update to helper_ret_*_mmu routines
tcg: Merge tcg_register_helper into tcg_context_init
tcg: Add tcg-runtime.c helpers to all_helpers
tcg: Put target helper data into an array.
tcg: Remove stray semi-colons from target-*/helper.h
tcg: Move helper registration into tcg_context_init
target-m68k: Rename helpers.h to helper.h
tcg: Use a GHashTable for tcg_find_helper
tcg: Delete tcg_helper_get_name declaration
tcg-hppa: Remove tcg backend
Message-id: 1381440525-6666-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This reverts most of commit 3d1237fb2a.
The commit claims to sort the output of "-device help" "by
functionality rather than alphabetical". Issues:
* The output was unsorted before, not alphabetically sorted.
Misleading, but harmless enough.
* The commit doesn't just sort the output of "-device help" as it
claims, it adds categories to each line of "-device help", and it
prints devices once per category. In particular, devices without a
category aren't shown anymore. Maybe such devices should not exist,
but they do. Regression.
* Categories are also added to the output of "info qdm". Silent
change, not nice. Output remains unsorted, unlike "-device help".
I'm going to reimplement the feature we actually want, without the
warts. Reverting the flawed commit first should make it easier to
review. However, I can't revert it completely, since DeviceClass
member categories has been put to use. So leave that part in.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1381410021-1538-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
blockdev-add shouldn't automatically generate IDs, but will keep most of
the DriveInfo creation code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
BlockDriverStates shouldn't be affected by an unplugged guest device,
except if created with the legacy -drive command line option or the
drive_add HMP command.
Make the automatic deletion as well as cancelling of jobs conditional on
an enable_auto_del boolean that is only set in drive_init().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
This field is used by blkverify to disable external snapshots creation.
It will also be used by block filters like quorum to disable external
snapshot creation.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
if a raw device like an iscsi target or host device is used
the current implementation makes a second call out to get
the block status of bs->file.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function for generically dumping the ImageInfoSpecific information
in a human-readable format to block/qapi.c.
Use this function in bdrv_image_info_dump and qemu-io-cmds.c:info_f to
allow qemu-img info resp. qemu-io -c info to print that format specific
information.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a function for retrieving an ImageInfoSpecific object from a block
driver.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Switch the string to enum type BlockJobType in BlockJobDriver.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We will use BlockJobType as the enum type name of block jobs in QAPI,
rename current BlockJobType to BlockJobDriver, which will eventually
become a set of operations, similar to block drivers.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Step three in the transition: helpers not tied to the target
"default" endianness. To be used when the guest uses a memory
operation with non-default endianness.
Signed-off-by: Richard Henderson <rth@twiddle.net>
* Fix for X86CPU model field of qemu32/qemu64 CPU models
* Bug fix for longjmp on FreeBSD
* Removal of unused function
* Confinement of clone syscall infrastructure to linux-user
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=hQfy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging
QOM CPUState refactorings / X86CPU
* Fix for X86CPU model field of qemu32/qemu64 CPU models
* Bug fix for longjmp on FreeBSD
* Removal of unused function
* Confinement of clone syscall infrastructure to linux-user
# gpg: Signature made Wed 09 Oct 2013 03:40:51 AM PDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (2) and others
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
cpu: Drop cpu_model_str from CPU_COMMON
cpu: Move cpu_copy() into linux-user
cputlb: Remove dead function tlb_update_dirty()
cpu-exec: Also reload CPUClass *cc after longjmp return in cpu_exec()
target-i386: Set model=6 on qemu64 & qemu32 CPU models
# By Amit Shah
# Via Amit Shah
* amit/char-remove-watch-on-unplug:
char: remove watch callback on chardev detach from frontend
char: use common function to disable callbacks on chardev close
char: move backends' io watch tag to CharDriverState
Message-id: 20131004154802.GA25646@grmbl.mre
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Now we have several qemu-ga commands not returning response on success.
It has been documented in qga/qapi-schema.json already. This patch exposes
the 'success-response' flag by extending 'guest-info' command. With this
change, the clients can handle the command response more flexibly.
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*fixed up commit subject
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
In the original code, qmp_get_command_list is used to construct
a list of all commands' name. To get the information of all qga
commands, it traverses the name list and search the command info
with its name. So it can cause O(n^2) in the number of commands.
This patch adds an interface to traverse the qmp command list by
QmpCommand to replace qmp_get_command_list. It can decrease the
complexity from O(n^2) to O(n).
Signed-off-by: Mark Wu <wudxw@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*fix up commit subject
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
A minimal update to use the new helpers with the return address argument.
Tested-by: Claudio Fontana <claudio.fontana@linaro.org>
Reviewed-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
One call inside of a loop to tcg_register_helper instead of hundreds
of sequential calls.
Presumably more icache and branch prediction friendly; resulting binary
size mostly unchanged on x86_64, as we're trading 32-bit rip-relative
references in .text for full 64-bit pointers in .rodata.
Signed-off-by: Richard Henderson <rth@twiddle.net>
# By Asias He (1) and Peter Lieven (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
scsi: Allocate SCSITargetReq r->buf dynamically [CVE-2013-4344]
block/iscsi: reenable iscsi_co_get_block_status
Message-id: 1381332391-8781-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
r->buf is hardcoded to 2056 which is (256 + 1) * 8, allowing 256 luns at
most. If more than 256 luns are specified by user, we have buffer
overflow in scsi_target_emulate_report_luns.
To fix, we allocate the buffer dynamically.
Signed-off-by: Asias He <asias@redhat.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Richard Henderson
# Via Richard Henderson
* rth/tcg-arm-pull:
tcg-arm: Move the tlb addend load earlier
tcg-arm: Remove restriction on qemu_ld output register
tcg-arm: Return register containing tlb addend
tcg-arm: Move load of tlb addend into tcg_out_tlb_read
tcg-arm: Use QEMU_BUILD_BUG_ON to verify constraints on tlb
tcg-arm: Use strd for tcg_out_arg_reg64
tcg-arm: Rearrange slow-path qemu_ld/st
tcg-arm: Use ldrd/strd for appropriate qemu_ld/st64
Message-id: 1380663109-14434-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Sebastian Ottlik
# Via Stefan Weil
* sweil/mingw:
util: call socket_set_fast_reuse instead of setting SO_REUSEADDR
slirp: call socket_set_fast_reuse instead of setting SO_REUSEADDR
net: call socket_set_fast_reuse instead of setting SO_REUSEADDR
gdbstub: call socket_set_fast_reuse instead of setting SO_REUSEADDR
util: add socket_set_fast_reuse function which will replace setting SO_REUSEADDR
Message-id: 1380735690-24009-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Stefan Weil
# Via Stefan Weil
* sweil/tci:
misc: Use new rotate functions
bitops: Add rotate functions (rol8, ror8, ...)
tci: Add implementation of rotl_i64, rotr_i64
Message-id: 1380137693-3729-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Since this is only read in cpu_copy() and linux-user has a global
cpu_model, drop the field from generic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
If a socket is closed it remains in TIME_WAIT state for some time. On operating
systems using BSD sockets the endpoint of the socket may not be reused while in
this state unless SO_REUSEADDR was set on the socket. On windows on the other
hand the default behaviour is to allow reuse (i.e. identical to SO_REUSEADDR on
other operating systems) and setting SO_REUSEADDR on a socket allows it to be
bound to a endpoint even if the endpoint is already used by another socket
independently of the other sockets state. This can even result in undefined
behaviour.
Many sockets used by QEMU should not block the use of their endpoint after being
closed while they are still in TIME_WAIT state. Currently QEMU sets SO_REUSEADDR
for such sockets, which can lead to problems on Windows. This patch introduces
the function socket_set_fast_reuse that should be used instead of setting
SO_REUSEADDR when fast socket reuse is desired and behaves correctly on all
operating systems.
As a failure of this function can only be caused by bad QEMU internal errors, an
assertion handles these situations. The return value is still passed on, to
minimize changes in client code and prevent unused variable warnings if NDEBUG
is defined.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
There's no Intel CPU with family=6,model=2, and Linux and Windows guests
disable SEP when seeing that combination due to Pentium Pro erratum #82.
In addition to just having SEP ignored by guests, Skype (and maybe other
applications) runs sysenter directly without passing through ntdll on
Windows, and crashes because Windows ignored the SEP CPUID bit.
So, having model > 2 is a better default on qemu64 and qemu32 for two
reasons: making SEP really available for guests, and avoiding crashing
applications that work on bare metal.
model=3 would fix the problem, but it causes CPU enumeration problems
for Windows guests[1]. So let's set model=6, that matches "Athlon
(PM core)" on AMD and "P2 with on-die L2 cache" on Intel and it allows
Windows to use all CPUs as well as fixing sysenter.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=508623
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Use the new helper_ret_*_mmu routines. Use a conditional call
to arrange for a tail-call from the store path, and to load the
return address for the helper for the load path.
Signed-off-by: Richard Henderson <rth@twiddle.net>
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSR83kAAoJECgfDbjSjVRpX08H/jKgYBNJaChev1TROIVHEGbu
IzvkjfocvKO+6wmhOf5x+xwFmzrijUMa1CPvOkCp8c2A3Iek7rmnedknlhXYh7dM
z5mXcvFGjnu7ST38ydF/Emk9+Z6rRg5Y/hkmlDyr+9lNcoiCDLXXcUrKjeIHNoWl
e8w3yiPCJ528QyrLwQ890XetJphv67pMlsjMgLQ2betMk++Ac/ctUf1D2p1X4NeQ
Q2drbo5Z4yDk0i6QMA3iLq1Bh/AhE10bCDq9rCzfZGIKVyncL6ne2pSi/xDvpLrF
dmxoiJ5QrK6xLnagCcn5T6SB9DkwbEPdL7qCqlxZ8USr7cVyPdzYtHtGSBWdeXY=
=xF01
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio-net bugfix related to softmac programming.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 29 Sep 2013 01:51:16 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (8) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
smbios: Factor out smbios_maybe_add_str()
smbios: Make multiple -smbios type= accumulate sanely
smbios: Improve diagnostics for conflicting entries
smbios: Convert to QemuOpts
smbios: Normalize smbios_entry_add()'s error handling to exit(1)
virtio-net: fix up HMP NIC info string on reset
pci: remove explicit check to 64K ioport size
piix4: disable io on reset
piix: use 64 bit window programmed by guest
q35: use 64 bit window programmed by guest
pci: add helper to retrieve the 64-bit range
range: add min/max operations on ranges
range: add Range to typedefs
q35: make pci window address/size match guest cfg
Message-id: 1380437951-21788-1-git-send-email-mst@redhat.com
# By Max Reitz (10) and others
# Via Kevin Wolf
* kwolf/for-anthony: (30 commits)
qcow2: Remove useless count_contiguous_clusters() parameter
qcow2: COMPRESSED on count_contiguous_clusters
qcow2: count_contiguous_clusters and compression
qcow2: Free only newly allocated clusters on error
qcow2: Always use error path in l2_allocate
qcow2: Don't put invalid L2 table into cache
qemu-iotests: Preallocated zero clusters in 061
qcow2: Correct bitmap size in zero expansion
qemu-iotests: Quote $TEST_IMG* and $TEST_DIR usage
qemu-iotests: Add basic ability to use binary sample images
qemu-iotests: fix qmp.py search path
block: use DIV_ROUND_UP in bdrv_co_do_readv
qcow2: Assert against currently impossible overflow
block: qed - use QEMU_PACKED for on-disk structures
block: qcow2 - used QEMU_PACKED for on-disk structures
block: vpc - use QEMU_PACKED for on-disk structures
block: vdi - use QEMU_PACKED for on-disk structures
rbd: avoid qemu_rbd_snap_list() memory leaks
qdict: Extract qdict_extract_subqdict
block: Fix compiler warning (-Werror=uninitialized)
...
Message-id: 1380296370-14523-1-git-send-email-kwolf@redhat.com
# By Richard Henderson (19) and Paolo Bonzini (2)
# Via Richard Henderson
* rth/tcg-ppc-pull: (21 commits)
tcg-ppc64: Implement CONFIG_QEMU_LDST_OPTIMIZATION
tcg-ppc64: Add _noaddr functions for emitting forward branches
tcg-ppc64: Streamline tcg_out_tlb_read
tcg-ppc64: Implement tcg_register_jit
tcg-ppc64: Handle long offsets better
tcg-ppc64: Tidy register allocation order
tcg-ppc64: Look through a constant function descriptor
tcg-ppc64: Fold constant call address into descriptor load
tcg-ppc64: Don't load the static chain from TCG
tcg-ppc64: Avoid code for nop move
tcg-ppc64: Use tcg_out64
tcg-ppc64: Use TCG_REG_Rn constants
tcg-ppc64: More use of TAI and SAI helper macros
tcg-ppc64: Reformat tcg-target.c
tcg-ppc: Fix and cleanup tcg_out_tlb_check
tcg-ppc: Use conditional branch and link to slow path
tcg-ppc: Cleanup tcg_out_qemu_ld/st_slow_path
tcg-ppc: Avoid code for nop move
tcg-ppc: use new return-argument ld/st helpers
tcg-ppc: fix qemu_ld/qemu_st for AIX ABI
...
Message-id: 1380126458-3247-1-git-send-email-rth@twiddle.net
# By Isaku Yamahata (4) and others
# Via Juan Quintela
* quintela/migration.next:
migration: ram_handle_compressed
arch_init: make is_zero_page accept size
migration: Fix debug print type
migration: add version supporting macros for struct pointer
rdma: constify ram_chunk_{index, start, end}
rdma: clean up of qemu_rdma_cleanup()
arch_init: right return for ram_save_iterate
savevm: fix wrong initialization by ram_control_load_hook
savevm: add comments for qemu_file_get_error()
Message-id: 1380024203-25897-1-git-send-email-quintela@redhat.com
contains the fixes from the previous pull request, which did not make
it yet.
Overall it contains
- a fix for kexec without kdump (which uses diag308 subcode 0 instead of 1)
- several sclp related fixes
- some initial sclp migration code
- the sclp line mode console
- A fix for a boot problem with the virtio ccw ipl bios
- zeroed out padding bytes for the notes section of dump-guest-memory
- some cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=4rT1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'borntraeger/tags/s390-next-20130924' into staging
This is a bunch of fixes/changes for the s390 architecture. It also
contains the fixes from the previous pull request, which did not make
it yet.
Overall it contains
- a fix for kexec without kdump (which uses diag308 subcode 0 instead of 1)
- several sclp related fixes
- some initial sclp migration code
- the sclp line mode console
- A fix for a boot problem with the virtio ccw ipl bios
- zeroed out padding bytes for the notes section of dump-guest-memory
- some cleanups
# gpg: Signature made Tue 24 Sep 2013 02:18:44 AM CDT using RSA key ID B5A61C7C
# gpg: Can't check signature: public key not found
# By Christian Borntraeger (6) and others
# Via Christian Borntraeger
* borntraeger/tags/s390-next-20130924:
s390/sclplmconsole: Add support for SCLP line-mode console
s390/ebcdic: Move conversion tables to header file
s390/eventfacility: allow childs to handle more than 1 event type
s390/eventfacility: remove unused event_type variable
s390/eventfacility: Fix receive/send masks
s390/eventfacility: fix multiple Read Event Data sources
s390/sclp: add reset() functions
s390/sclpquiesce: Add code to support live migration
s390/sclpconsole: Add code to support live migration for sclpconsole
s390/sclpconsole: modify definition of input buffer
s390/kexec: Implement diag308 subcode 0
s390/ioinst: Moved the CC setting to the IO instruction handlers
s390/cpu: Make setcc() function available to other files
s390/ipl: Update the s390-ccw.img rom
s390/ipl: Fix waiting for virtio processing
s390/dump: zero out padding bytes in notes sections
s390/kvm: Add check for priviledged SCLP handler
Message-id: 1380007671-18976-1-git-send-email-borntraeger@de.ibm.com
Currently, -smbios type=T,NAME=VAL,... adds one field (T,NAME) with
value VAL to fw_cfg for each unique NAME. If NAME occurs multiple
times, the last one's VAL is used (before the QemuOpts conversion, the
first one was used).
Multiple -smbios can add multiple fields with the same (T, NAME).
SeaBIOS reads all of them from fw_cfg, but uses only the first field
(T, NAME). The others are ignored.
"First one wins, subsequent ones get ignored silently" isn't nice. We
commonly let the last option win. Useful, because it lets you
-readconfig first, then selectively override with command line
options.
Clean up -smbios to work the common way. Accumulate the settings,
with later ones overwriting earlier ones. Put the result into fw_cfg
(no more useless duplicates).
Bonus cleanup: qemu_uuid_parse() no longer sets SMBIOS system uuid by
side effect.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
So that it can be set in config file for -readconfig.
This tightens parsing of -smbios, and makes it more consistent with
other options: unknown parameters are rejected, numbers with trailing
junk are rejected, when a parameter is given multiple times, last
rather than first wins, ...
MST: drop one chunk to fix build errors
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It exits on all error conditions but one, where it returns -1.
Normalize, and return void.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently Xen hvm s3 has a bug coming from the difference between
qemu-traditioanl and qemu-xen. For qemu-traditional, the way to
resume from hvm s3 is via 'xl trigger' command. However, for
qemu-xen, the way to resume from hvm s3 inherited from standard
qemu, i.e. via QMP, and it doesn't work under Xen.
The root cause is, for qemu-xen, 'xl trigger' command didn't reset
devices, while QMP didn't unpause hvm domain though they did qemu
system reset.
We have two qemu patches and one xl patch to fix Xen hvm s3 bug.
This patch is the qemu patch 1. It adjusts qemu wakeup so that
Xen s3 resume logic (which will be implemented at qemu patch 2)
will be notified after qemu system reset.
Signed-off-by: Liu Jinsong <jinsong.liu@intel.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
These use a 32-bit load-of-immediate to save a mflr+addi+mtlr sequence.
Tested with a Windows 98 guest (pretty much the most recent thing I
could run on my PPC machine) and kvm-unit-tests's sieve.flat. The
speed up for sieve.flat is as high as 10% for qemu-system-i386, 25%
(no kidding) for qemu-system-x86_64 on my PowerBook G4.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Some drivers will have driver specifics options but no filename.
This new bool allow the block layer to treat them correctly.
The .bdrv_needs_filename is set in drivers not having .bdrv_parse_filename and
not having .bdrv_open.
The first exception to this rule will be the quorum driver.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds version supporting macros VMSTATE_STRUCT_POINTER_TEST_V
and VMSTATE_STRUCT_POINTER_V in addition to the already existing
VMSTATE_STRUCT_POINTER and VMSTATE_STRUCT_POINTER_TEST macros.
Cc: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
virtio-blk: do not relay a previous driver's WCE configuration to the current
blockdev: do not default cache.no-flush to true
block: don't lose data from last incomplete sector
qcow2: Correct snapshots size for overlap check
coroutine: fix /perf/nesting coroutine benchmark
coroutine: add qemu_coroutine_yield benchmark
qemu-timer: do not take the lock in timer_pending
qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
qemu-timer: drop outdated signal safety comments
osdep: warn if open(O_DIRECT) on fails with EINVAL
libcacard: link against qemu-error.o for error_report()
Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
# By Stefan Weil (8) and others
# Via Michael Tokarev
* mjt/trivial-patches:
tests/.gitignore: ignore test-throttle
exec: Fix broken build for MinGW (regression)
kvm: Fix compiler warning (clang)
tcg-sparc: Fix parenthesis warning
Makefile: Remove some more files when cleaning
target-i386: Fix segment cache dump
iov: avoid "orig_len may be used unitialized" warning
vscclient: remove unnecessary use of uninitialized variable
trace-events: Clean up with scripts/cleanup-trace-events.pl again
tci: Fix qemu-alpha on 32 bit hosts (wrong assertions)
*-user: Improve documentation for lock_user function
MAINTAINERS: Add missing entry to filelist for TCI target
translate-all: Fix formatting of dump output
*-user: Fix typo in comment (ulocking -> unlocking)
docs: Fix IO port number for CPU present bitmap.
q35: Fix typo in constant DEFUALT -> DEFAULT.
configure: Undefine _FORTIFY_SOURCE prior using it
Message-id: 1379696296-32105-1-git-send-email-mjt@msgid.tls.msk.ru
# By Alexey Kardashevskiy (3) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
target-i386: add feature kvm_pv_unhalt
linux-headers: update to 3.12-rc1
target-i386: forward CPUID cache leaves when -cpu host is used
linux-headers: update to 3.11
kvm: fix traces to use %x instead of %d
kvmvapic: Clear also physical ROM address when entering INACTIVE state
kvmvapic: Enter inactive state on hardware reset
kvmvapic: Catch invalid ROM size
kvm irqfd: support direct msimessage to irq translation
fix steal time MSR vmsd callback to proper opaque type
kvm: warn if num cpus is greater than num recommended
cpu: Move cpu state syncs up into cpu_dump_state()
exec: always use MADV_DONTFORK
Message-id: 1379694292-1601-1-git-send-email-pbonzini@redhat.com
# By Hervé Poussineau (5) and Stefan Weil (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi
lsi: add 53C810 variant
lsi: remove todo
lsi: ignore write accesses to CTEST0 registers
lsi: check ssid versus sdid only if ssid is valid
lsi: use constant name instead of its value
The following sequence happens:
- the SeaBIOS virtio-blk driver does not support the WCE feature, which
causes QEMU to disable writeback caching
- the Linux virtio-blk driver resets the device, finds WCE is available
but writeback caching is disabled; tells block layer to not send cache
flush commands
- the Linux virtio-blk driver sets the DRIVER_OK bit, which causes
writeback caching to be re-enabled, but the Linux virtio-blk driver does
not know of this side effect and cache flushes remain disabled
The bug is at the third step. If the guest does know about CONFIG_WCE,
QEMU should ignore the WCE feature's state. The guest will control the
cache mode solely using configuration space. This change makes Linux
do flushes correctly, but Linux will keep SeaBIOS's writethrough mode.
Hence, whenever the guest is reset, the cache mode of the disk should
be reset to whatever was specified in the "-drive" option. With this
change, the Linux virtio-blk driver finds that writeback caching is
enabled, and tells the block layer to send cache flush commands
appropriately.
Reported-by: Rusty Russell <rusty@au1.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add simple support for SCLP line-mode also known as operating
system messages. This can be added in addition to or instead of
the SCLP full screen console with -device sclplmconsole.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Move conversion tables to header file.
- In SCLP line mode processing EBCDIC/ASCII conversion is needed.
- An additional EBCDIC to ASCII conversion function is added.
Signed-off-by: Heinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Currently all handlers (quiesce, console) only handle one event type.
Some drivers will handle multiple (compatible) event types. Rework the
code accordingly.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
The event_type variable is never used. Get rid of it.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
Currently we announce interchanged receive/send masks. This did not
trigger a bug, since the sclp console has the same masks for
send/receive and the Linux guest does not check the sclp mask for simple
events like quiesce. With other event users like the sclp line mode
console, we will have different send/receive bits. Fix it.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
On PPC64 systems MSI Messages are translated to system IRQ in a PCI
host bridge. This is already supported for emulated MSI/MSIX but
not for irqfd where the current QEMU allocates IRQ numbers from
irqchip and maps MSIMessages to IRQ in the host kernel.
This adds a new direct mapping flag which tells
the kvm_irqchip_add_msi_route() function that a new VIRQ
should not be allocated, instead the value from MSIMessage::data
should be used. It is up to the platform code to make sure that
this contains a valid IRQ number as sPAPR does in spapr_pci.c.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The x86 and ppc targets call cpu_synchronize_state() from their
*_cpu_dump_state() callbacks to ensure that up to date state is dumped
when KVM is enabled (for example when a KVM internal error occurs).
Move this call up into the generic cpu_dump_state() function so that
other KVM targets (namely MIPS) can take advantage of it.
This requires kvm_cpu_synchronize_state() and cpu_synchronize_state() to
be moved out of the #ifdef NEED_CPU_H in <sysemu/kvm.h> so that they're
accessible to qom/cpu.c.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: qemu-ppc@nongnu.org
Cc: kvm@vger.kernel.org
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Introduce QEMUTimerList->active_timers_lock to protect the linked list
of active timers. This allows qemu_timer_mod_ns() to be called from any
thread.
Note that vm_clock is not thread-safe and its use of
qemu_clock_has_timers() works fine today but is also not thread-safe.
The purpose of this patch is to eventually let device models set or
cancel timers from a vcpu thread without holding the global mutex.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Max Reitz (16) and others
# Via Kevin Wolf
* kwolf/for-anthony: (33 commits)
qemu-iotests: Fix test 038
block: Assert validity of BdrvActionOps
qemu-iotests: Cleanup test image in test number 007
qemu-img: fix invalid JSON
coroutine: add ./configure --disable-coroutine-pool
qemu-iotests: Adjustments due to error propagation
qcow2: Use Error parameter
qemu-img create: Emit filename on error
block: Error parameter for create functions
block: Error parameter for open functions
bdrv: Use "Error" for creating images
bdrv: Use "Error" for opening images
qemu-iotests: add 057 internal snapshot for block device test case
hmp: add interface hmp_snapshot_delete_blkdev_internal
hmp: add interface hmp_snapshot_blkdev_internal
qmp: add interface blockdev-snapshot-delete-internal-sync
qmp: add interface blockdev-snapshot-internal-sync
qmp: add internal snapshot support in qmp_transaction
snapshot: distinguish id and name in snapshot delete
snapshot: new function bdrv_snapshot_find_by_id_and_name()
...
Message-id: 1379073063-14963-1-git-send-email-kwolf@redhat.com
# By Peter Lieven (3) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
spapr-vscsi: Report error on unsupported MAD requests
spapr-vscsi: Adding VSCSI capabilities
iscsi: split discard requests in multiple parts
iscsi: add .bdrv_get_block_status
iscsi: add logical block provisioning information to iscsilun
hw/scsi/lsi53c895a: Use deposit32 rather than handcoded shift/mask
hw/scsi/lsi53c895a: Use sextract32 for sign-extension
scsi: Fix scsi_bus_legacy_add_drive() scsi-generic with serial
virtio-scsi: Make type virtio-scsi-common abstract
spapr-vscsi: add task management
scsi: prefer UUID to VM name for the initiator name
Message-id: 1378984634-765-1-git-send-email-pbonzini@redhat.com
Currently, treat it exactly as a 53C895A.
53C895A is a 53C810 with more capabilities, so this should work.
However, this lets us test different code paths on Linux, which
don't use lastest features if it detect a 810, or on some OSes
which only support 810 and not 895A (like very old Windows NT
versions).
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it a generic hook rather than a KVM hook. Less code and
ifdeffery.
Since the only user of the hook is old S390 KVM, there's hope we can
get rid of it some day.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Instead of spreading its ifdeffery everywhere, confine it to
qemu_ram_alloc_from_ptr(). Everywhere else, simply test block->fd,
which is non-negative exactly when block uses -mem-path.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Message-id: 1375276272-15988-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Add an Error ** parameter to bdrv_create and its associated functions to
allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to bdrv_open, bdrv_file_open and associated
functions to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add an Error ** parameter to BlockDriver.bdrv_open and
BlockDriver.bdrv_file_open to allow more specific error messages.
Signed-off-by: Max Reitz <mreitz@redhat.com>
This interface use id and name as optional parameters, to handle the
case that one image contain multiple snapshots with same name which
may be '', but with different id.
Adding parameter id is for historical compatiability reason, and
that case is not possible in qemu's new interface for internal
snapshot at block device level, but still possible in qemu-img.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Snapshot creation actually already distinguish id and name since it take
a structured parameter *sn, but delete can't. Later an accurate delete
is needed in qmp_transaction abort and blockdev-snapshot-delete-sync,
so change its prototype. Also *errp is added to tip error, but return
value is kepted to let caller check what kind of error happens. Existing
caller for it are savevm, delvm and qemu-img, they are not impacted by
introducing a new function bdrv_snapshot_delete_by_id_or_name(), which
check the return value and do the operation again.
Before this patch:
For qcow2, it search id first then name to find the one to delete.
For rbd, it search name.
For sheepdog, it does nothing.
After this patch:
For qcow2, logic is the same by call it twice in caller.
For rbd, it always fails in delete with id, but still search for name
in second try, no change to user.
Some code for *errp is based on Pavel's patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To make it clear about id and name in searching, add this API
to distinguish them. Caller can choose to search by id or name,
*errp will be set only for exception.
Some code are modified based on Pavel's patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch adds the "amend" option to qemu-img which allows changing
image options on existing image files. It also adds the generic bdrv
implementation which is basically just a wrapper for the image format
specific function.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The UUID is unique even across multiple hosts, thus it is
better than a VM name even if it is less user-friendly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* aarch64 preparation patchset (excluding the defconfigs, so this
doesn't actually enable the new targets yet)
* minor bugfixes and cleanups
* disable "-cpu any" in system emulation mode
* fix ARMv7M stack alignment on reset
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=oraU
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130910' into staging
ARM queue:
* aarch64 preparation patchset (excluding the defconfigs, so this
doesn't actually enable the new targets yet)
* minor bugfixes and cleanups
* disable "-cpu any" in system emulation mode
* fix ARMv7M stack alignment on reset
# gpg: Signature made Tue 10 Sep 2013 01:46:11 PM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Alexander Graf (13) and others
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130910: (28 commits)
configure: Add handling code for AArch64 targets
linux-user: Add AArch64 support
linux-user: Allow targets to specify a minimum uname release
linux-user: Add AArch64 termbits.h definitions
linux-user: Implement cpu_set_tls() and cpu_clone_regs() for AArch64
linux-user: Make sure NWFPE code is 32 bit ARM only
linux-user: Add signal handling for AArch64
linux-user: Fix up AArch64 syscall handlers
linux-user: Add syscall number definitions for AArch64
linux-user: Add cpu loop for AArch64
linux-user: Don't treat AArch64 cpu names specially
target-arm: Add AArch64 gdbstub support
target-arm: Add AArch64 translation stub
target-arm: Prepare translation for AArch64 code
target-arm: Disable 32 bit CPUs in 64 bit linux-user builds
target-arm: Add new AArch64CPUInfo base class and subclasses
target-arm: Pass DisasContext* to gen_set_pc_im()
target-arm: Fix target_ulong/uint32_t confusions
target-arm: Export cpu_env
target-arm: Extract the disas struct to a header file
...
Message-id: 1378839142-7726-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Gerd Hoffmann (2) and Miroslav Rezanina (2)
# Via Gerd Hoffmann
* kraxel/usb.89:
ehci: save device pointer in EHCIState
Remove dev-bluetooth.c dependency from vl.c
Preparation for usb-bt-dongle conditional build
usb: sanity check setup_index+setup_len in post_load
Message-id: 1378806073-25197-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Tomoki Sekiyama (10) and Paul Burton (1)
# Via Michael Roth
* mdroth/qga-pull-2013-9-9:
QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command
qemu-ga: Install Windows VSS provider on `qemu-ga -s install'
qemu-ga: Call Windows VSS requester in fsfreeze command handler
qemu-ga: Add Windows VSS provider and requester as DLL
error: Add error_set_win32 and error_setg_win32
qemu-ga: Add configure options to specify path to Windows/VSS SDK
Add a script to extract VSS SDK headers on POSIX system
checkpatch.pl: Check .cpp files
Add c++ keywords to QAPI helper script
configure: Support configuring C++ compiler
mips_malta: support up to 2GiB RAM
Message-id: 1378755701-2051-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Anthony PERARD
# Via Stefano Stabellini
* sstabellini/xen-2013-09-09:
pc_q35: Initialize Xen.
pc: Initializing ram_memory under Xen.
Message-id: alpine.DEB.2.02.1309091718030.6397@kaball.uk.xensource.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Paolo Bonzini (21) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
qemu-iotests: Fixed test case 026
qemu-iotests: Whitespace cleanup
dataplane: Fix startup race.
block: look for zero blocks in bs->file
block: add default get_block_status implementation for protocols
raw-posix: report unwritten extents as zero
raw-posix: return get_block_status data and flags
docs, qapi: document qemu-img map
qemu-img: add a "map" subcommand
block: return BDRV_BLOCK_ZERO past end of backing file
block: use bdrv_has_zero_init to return BDRV_BLOCK_ZERO
block: return get_block_status data and flags for formats
block: define get_block_status return value
block: introduce bdrv_get_block_status API
block: make bdrv_has_zero_init return false for copy-on-write-images
qemu-img: always probe the input image for allocated sectors
block: expect errors from bdrv_co_is_allocated
block: remove bdrv_is_allocated_above/bdrv_co_is_allocated_above distinction
block: do not use ->total_sectors in bdrv_co_is_allocated
block: make bdrv_co_is_allocated static
...
Message-id: 1378481953-23099-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
The ARM EABI specifies that 64 bit integers should be
8 aligned; remove our incorrect setting of 4 alignment.
This has no actual effect since it only set the alignment
for the 'abi_ullong' and 'abi_llong' types, which are used
only inside code which is MIPS-specific, but it will
avoid problems later if we use the types elsewhere.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use usb_legacy_register handling to create bt-dongle device and remove code
dependency from vl.c so CONFIG_USB_BLUETOOTH can be disabled.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To allow disable usb-bt-dongle device using CONFIG_BLUETOOTH option, some of
functions in vl.c file has to be made accessible in dev-bluetooth.c. This is
pure code moving.
Signed-off-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These functions help maintaining homogeneous formatting of error messages
with Windows error code and description (generated by
g_win32_error_message()).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
CC: qemu-stable@nongnu.org
This patch partially implements the e1000 interrupt mitigation mechanisms.
Using a single QEMUTimer, it emulates the ITR register (which is the newer
mitigation register, recommended by Intel) and approximately emulates
RADV and TADV registers. TIDV and RDTR register functionalities are not
emulated (RDTR is only used to validate RADV, according to the e1000 specs).
RADV, TADV, TIDV and RDTR registers make up the older e1000 mitigation
mechanism and would need a timer each to be completely emulated. However,
a single timer has been used in order to reach a good compromise between
emulation accuracy and simplicity/efficiency.
The implemented mechanism can be enabled/disabled specifying the command
line e1000-specific boolean parameter "mitigation", e.g.
qemu-system-x86_64 -device e1000,mitigation=on,... ...
For more information, see the Software developer's manual at
http://download.intel.com/design/network/manuals/8254x_GBe_SDM.pdf.
Interrupt mitigation boosts performance when the guest suffers from
an high interrupt rate (i.e. receiving short UDP packets at high packet
rate). For some numerical results see the following link
http://info.iet.unipi.it/~luigi/papers/20130520-rizzo-vm.pdf
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de> (for pc-* machines)
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Each networking client has a queue for packets that could not yet be
delivered to that client. Calling this queue "send_queue" is highly
confusing as it has nothing to to with packets send from this client but
to it. Avoid this confusing by renaming it to "incoming_queue".
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Define the return value of get_block_status. Bits 0, 1, 2 and 9-62
are valid; bit 63 (the sign bit) is reserved for errors. Bits 3-8
are left for future extensions.
The return code is compatible with the old is_allocated API: if a driver
only returns 0 or 1 (aka BDRV_BLOCK_DATA) like is_allocated used to,
clients of is_allocated will not have any change in behavior. Still,
we will return more precise information in the next patches and the
new definition of bdrv_is_allocated is already prepared for this.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
For now, bdrv_get_block_status is just another name for bdrv_is_allocated.
The next patches will add more flags.
This also touches all block drivers with a mostly mechanical rename. The
sole exception is cow; because it calls cow_co_is_allocated from the read
code, we keep that function and make cow_co_get_block_status a wrapper.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that bdrv_is_allocated detects coroutine context, the two can
use the same code.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
bdrv_is_allocated can detect coroutine context and go through a fast
path, similar to other block layer functions.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Manage BlockDriverState lifecycle with refcnt, so bdrv_delete() is no
longer public and should be called by bdrv_unref() if refcnt is
decreased to 0.
This is an identical change because effectively, there's no multiple
reference of BDS now: no caller of bdrv_ref() yet, only bdrv_new() sets
bs->refcnt to 1, so all bdrv_unref() now actually delete the BDS.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce bdrv_ref/bdrv_unref to manage the lifecycle of
BlockDriverState. They are unused for now but will used to replace
bdrv_delete() later.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Implement the continuous leaky bucket algorithm devised on IRC as a separate
module.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Accesses to unassigned io ports shall return -1 on read and be ignored
on write. Ensure these properties via dedicated ops, decoupling us from
the memory core's handling of unassigned accesses.
Cc: qemu-stable@nongnu.org
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All the backends implement an io watcher tag for callbacks. Move it to
CharDriverState from each backend's struct to make accessing the tag from
backend-neutral functions easier.
This will be used later to cancel a callback on chardev detach from a
frontend.
CC: <qemu-stable@nongnu.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=/bSY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-cpu-for-anthony' into staging
QOM CPUState refactorings / X86CPU
* Conversion of global CPU list to QTAILQ - preparing for CPU hot-unplug
* Document X86CPU magic numbers for CPUID cache info
# gpg: Signature made Tue 03 Sep 2013 10:59:22 AM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (3) and Eduardo Habkost (1)
# Via Andreas Färber
* afaerber/tags/qom-cpu-for-anthony:
target-i386: Use #defines instead of magic numbers for CPUID cache info
cpu: Replace qemu_for_each_cpu()
cpu: Use QTAILQ for CPU list
a15mpcore: Use qemu_get_cpu() for generic timers
# By Stefan Weil (6) and others
# Via Michael Tokarev
* mjt/trivial-patches:
aio / timers: use g_usleep() not sleep()
adlib: sort offsets in portio registration
qmp: fix integer usage in examples
tci: Remove function tcg_out64 (fix broken build)
target-arm: Report unimplemented opcodes (LOG_UNIMP)
pflash_cfi02.c: fix debug macro
configure: Remove unneeded redirections of stderr (pkg-config --exists)
configure: Remove unneeded redirections of stderr (pkg-config --cflags, --libs)
configure: Don't write .pyc files by default (python -B)
curl: qemu_bh_new() can never return NULL
slirp/arp_table.c: Avoid shifting into sign bit of signed integers
configure: disable clang -Wstring-plus-int warning
rdma: silly ipv6 bugfix
misc: Fix some typos in names and comments
slirp: Port redirection option behave differently on Linux and Windows
Message-id: 1378119695-14568-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSIveoAAoJECgfDbjSjVRp2C8IAL7DE0oM0jfEB5DAd8jlULHx
hA8RP21rFzyU8PwtHB+72+C1ImldBge4hvhI+qbsm6PoW3RCeV/lbESIRTiv8dCO
pGUOFmv8MfJAH+WWFsle5mRisoTksYQWWBMHCOqvmaY4JL9pBQOhCLHVhV1XfjtL
hO7uGrWmlijeILv5CxYyPMYuOEdVvRSZKzE+Fp2YKfNstiQrS5fJIlqmwCHrlneW
l2atnt2d9ZV1K8QYiGg4GRVbSAMJvA1wum+0F4gnXIz9yAeOt+Ht1s8cNKQDMouJ
r2OyVgPM9aS/XaO6ejct1Sjo7Vgh/Ublrpw3lFqV/qHix6rEHwy2I3JHFEJPjvk=
=SytJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups and enhancements,
and a virtio bugfix for level interrupts.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Sun 01 Sep 2013 03:15:36 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (3) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio_pci: fix level interrupts with irqfd
pc: reduce duplication, fix PIIX descriptions
hw: Clean up bogus default boot order
pci: add config space access traces
pc: fix regression for 64 bit PCI memory
pci: Introduce helper to retrieve a PCI device's DMA address space
Message-id: 1378023590-11109-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
* Fix QOM and ISA documentation errors
* Extend object_initialize() et al. to check the instance size
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=LiUs
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging
QOM device refactorings
* Fix QOM and ISA documentation errors
* Extend object_initialize() et al. to check the instance size
# gpg: Signature made Fri 30 Aug 2013 02:19:48 PM CDT using RSA key ID 3E7E013F
# gpg: Can't check signature: public key not found
# By Andreas Färber (14) and others
# Via Andreas Färber
* afaerber/tags/qom-devices-for-anthony:
isa: Fix documentation of isa_register_portio_list()
qom: Assert instance size in object_initialize_with_type()
qom: Pass available size to object_initialize()
qdev: Pass size to qbus_create_inplace()
virtio-mmio: Pass size to virtio_mmio_bus_new()
virtio-ccw: Pass size to virtio_ccw_bus_new()
s390-virtio-bus: Pass size to virtio_s390_bus_new()
virtio-pci: Pass size to virtio_pci_bus_new()
usb: Pass size to usb_bus_new()
scsi: Pass size to scsi_bus_new()
pci: Pass size to pci_bus_new_inplace()
ide: Pass size to ide_bus_new()
ipack: Pass size to ipack_bus_new_inplace()
intel-hda: Pass size to hda_codec_bus_init()
qom: Fix object_initialize_with_type() argument name in documentation
virtio: Remove unnecessary OBJECT() casts
object: Fix typo in qom/object.h
It was introduced to loop over CPUs from target-independent code, but
since commit 182735efaf target-independent
CPUState is used.
A loop can be considered more efficient than function calls in a loop,
and CPU_FOREACH() hides implementation details just as well, so use that
instead.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
* 'tcg-next' of git://github.com/rth7680/qemu: (29 commits)
tcg-i386: Make use of zero-extended memory helper routines
tcg: Introduce zero and sign-extended versions of load helpers
exec: Split softmmu_defs.h
target: Include softmmu_exec.h where forgotten
exec: Rename USUFFIX to LSUFFIX
tcg-i386: Don't perform GETPC adjustment in TCG code
exec: Reorganize the GETRA/GETPC macros
configure: Allow x32 as a host
tcg-i386: Adjust tcg_out_tlb_load for x32
tcg-i386: Use intptr_t appropriately
tcg: Fix jit debug for x32
tcg: Use appropriate types in tcg_reg_alloc_call
tcg: Change tcg_out_ld/st offset to intptr_t
tcg: Change tcg_gen_exit_tb argument to uintptr_t
tcg: Use uintptr_t in TCGHelperInfo
tcg: Change relocation offsets to intptr_t
tcg: Change memory offsets to intptr_t
tcg: Change frame pointer offsets to intptr_t
tcg: Define TCG_ptr properly
tcg: Define TCG_TYPE_PTR properly
...
The _cmmu helpers can be moved to exec-all.h. The helpers that are
used from TCG will shortly need access to tcg_target_long so move
their declarations into tcg.h.
This requires minor include adjustments to all TCG backends.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
In a following patch, there will be confusion between multiple "unsigned"
suffixes; rename this one so as to imply "load".
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Always define GETRA; use __builtin_extract_return_addr, rather than
having a special case for s390. Split GETPC_ADJ out of GETPC; use 2
universally, rather than having a special case for arm.
Rename GETPC_LDST to GETRA_LDST to indicate that it does not
contain the GETPC_ADJ value. Likewise with GETPC_EXT to GETRA_EXT.
Perform the GETPC_ADJ adjustment inside helper_ret_ld/st. This will
allow backends to pass along the "true" return address rather than
the massaged GETPC value. In the meantime, double application of
GETPC_ADJ does not hurt, since the call insn in all ISAs is at least
4 bytes long.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If the refcount of a refcount block is greater than one, we can at least
try to repair that problem by duplicating the affected block.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
H_SET_MODE is used for controlling various partition settings. One
of these settings is the endianness a guest takes its exceptions in.
Signed-off-by: Anton Blanchard <anton@samba.org>
[agraf: fix whitespace]
Signed-off-by: Alexander Graf <agraf@suse.de>
On the sPAPR platform a guest allocates MSI/MSIX vectors via RTAS
hypercalls which return global IRQ numbers to a guest so it only
operates with those and never touches MSIMessage.
Therefore MSIMessage handling is completely hidden in QEMU.
Previously every sPAPR PCI host bridge implemented its own MSI window
to catch msi_notify()/msix_notify() calls from QEMU devices (virtio-pci
or vfio) and route them to the guest via qemu_pulse_irq().
MSIMessage used to be encoded as:
.addr - address within the PHB MSI window;
.data - the device index on PHB plus vector number.
The MSI MR write function translated this MSIMessage to a global IRQ
number and called qemu_pulse_irq().
However the total number of IRQs is not really big (at the moment it is
1024 IRQs starting from 4096) and even 16bit data field of MSIMessage
seems to be enough to store an IRQ number there.
This simplifies MSI handling in sPAPR PHB. Specifically, this does:
1. remove a MSI window from a PHB;
2. add a single memory region for all MSIs to sPAPREnvironment
and spapr_pci_msi_init() to initialize it;
3. encode MSIMessage as:
* .addr - a fixed address of SPAPR_PCI_MSI_WINDOW==0x40000000000ULL;
* .data as an IRQ number.
4. change IRQ allocator to align first IRQ number in a block for MSI.
MSI uses lower bits to specify the vector number so the first IRQ has to
be aligned. MSIX does not need any special allocator though.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Most typos were found using a modified version of codespell:
accross -> across
issueing -> issuing
TICNT_THRESHHOLD -> TICNT_THRESHOLD
bandwith -> bandwidth
VCARD_7816_PROPIETARY -> VCARD_7816_PROPRIETARY
occured -> occurred
gaurantee -> guarantee
sofware -> software
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We have a lot of code duplication between machine types,
this increases with each new machine type
and each new field.
This has already introduced a minor bug: description
for pc-1.3 says "Standard PC" while description for
pc-1.4 is "Standard PC (i440FX + PIIX, 1996)"
which makes you think 1.3 is somehow more standard,
or newer, while in fact it's a revision of the same PC.
This patch addresses this issue by using macros, along
the lines used by PC_COMPAT_X_X - only for
non-property options.
The approach can extend to non-PC machine types.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This catches objects initializing beyond allocated memory, e.g.,
when subtypes get extended with instance state of their own.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed on to object_initialize_with_type().
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> (virtio-ccw)
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to object_initialize().
Since commit 39355c3826 the argument is
void*, so drop some superfluous (BusState *) casts or direct parent
field usages.
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to qbus_create_inplace().
Use DEVICE() cast to avoid a direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To be passed to qbus_create_inplace().
Use DEVICE() casts instead of direct parent field access.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
There's been a cut-and-paste error, it looks like, in the documentation
in qom/object.h.
Signed-off-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Two new functions are added; the first one checks a given range in the
image file for overlaps with metadata (main header, L1 tables, L2
tables, refcount table and blocks).
The second one should be used immediately before writing to the image
file as it calls the first function and, upon collision, marks the
image as corrupt and makes the BDS unusable, thereby preventing
further access.
Both functions take a bitmask argument specifying the structures which
should be checked for overlaps, making it possible to also check
metadata writes against colliding with other structures.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adds an "assigned" flag to QEMUOptionParameter which is cleared at the
beginning of parse_option_parameters and set on (successful)
set_option_parameter and set_option_parameter_int.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Parameter *mon is added, and local variable *mon added in previous patch
is removed. The caller readline_completion(), pass rs->mon as value, which
should be initialized in readline_init() called by monitor_init().
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* qemu-kvm/uq/master:
kvm-stub: fix compilation
kvm: shorten the parameter list for get_real_device()
kvm: i386: fix LAPIC TSC deadline timer save/restore
kvm-all.c: max_cpus should not exceed KVM vcpu limit
kvm: Simplify kvm_handle_io
kvm: x86: fix setting IA32_FEATURE_CONTROL with nested VMX disabled
kvm: add KVM_IRQFD_FLAG_RESAMPLE support
kvm: migrate vPMU state
target-i386: remove tabs from target-i386/cpu.h
Initialize IA32_FEATURE_CONTROL MSR in reset and migration
Conflicts:
target-i386/cpu.h
target-i386/kvm.c
aliguori: fixup trivial conflicts due to whitespace and added cpu
argument
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This includes pc and pci cleanups, future-proofing of ROM files,
and a virtio bugfix correcting splice on virtio console.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJSGvbsAAoJECgfDbjSjVRp0qsH/2N/b/5bNhL6gx5Kjigzv7Lt
bmCUsSsUm/Rnhke2SpDPVdIOU9W5WIX2zte8qiXuBJi3j/RS9procbgUZrCetpUI
GHQOn+n8e2TX/P9CIcHaN/bA1b+Kx+bvaVbDL/6P2PJvodbDGwDLp/9y+Tisv5Ye
kLow8Y4ZJcaTlmPf/Mh1AnhNa3gel231A3qwugVUNDSyITM6pG/0M07xk8YBj+JJ
6DYrlK0bKMNDxPu5St+YP94D1ODv2zM1aio/TdMUaNfqTZM1iqGTj3zKkBS2PjT0
RhuU2x4N91lY/uCdudtWSj5dYtfRT/xw7qwNAz9IHNz6RlGeX0n++ClMC8z9Y8A=
=Pc09
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into stable-1.5
pc,pci,virtio fixes and cleanups
This includes pc and pci cleanups, future-proofing of ROM files,
and a virtio bugfix correcting splice on virtio console.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 26 Aug 2013 01:34:20 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Markus Armbruster (5) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
virtio: virtqueue_get_avail_bytes: fix desc_pa when loop over the indirect descriptor table
pc_piix: Kill pc_init1() memory region args
pc: pc_compat_1_4() now can call pc_compat_1_5()
pc: Create pc_compat_*() functions
pc: Kill pc_init_pci_1_0()
pc: Don't explode QEMUMachineInitArgs into local variables needlessly
pc: Don't prematurely explode QEMUMachineInitArgs
ppc: Don't duplicate QEMUMachineInitArgs in PPCE500Params
ppc: Don't explode QEMUMachineInitArgs into local variables needlessly
sun4: Don't prematurely explode QEMUMachineInitArgs
q35: Add PCIe switch to example q35 configuration
loader: store FW CFG ROM files in RAM
arch_init: align MR size to target page size
pc: cleanup 1.4 compat support
Message-id: 1377535318-30491-1-git-send-email-mst@redhat.com
Indeed, remove it entirely and remove the is_tcg_gen_code check
from GETPC_EXT.
Fixes https://bugs.launchpad.net/qemu/+bug/1218098 wherein a call
to a "normal" helper function performed a sequence of tail calls
all the way into the memory helper functions, leading to a stack
frame in which the memory helper function appeared to be called
directly from tcg.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We set default boot order "cad" in every single machine definition
except "pseries" and "moxiesim", even though very few boards actually
care for boot order, and "cad" makes sense for even fewer.
Machines that care:
* pc and its variants
Accept up to three letters 'a', 'b' (undocumented alias for 'a'),
'c', 'd' and 'n'. Reject all others (fatal with -boot).
* nseries (n800, n810)
Check whether order starts with 'n'. Silently ignored otherwise.
* prep, g3beige, mac99
Extract the first character the machine understands (subset of
'a'..'f'). Silently ignored otherwise.
* spapr
Accept an arbitrary string (vl.c restricts it to contain only
'a'..'p', no duplicates).
* sun4[mdc]
Use the first character. Silently ignored otherwise.
Strip characters these machines ignore from their default boot order.
For all other machines, remove the unused default boot order
alltogether.
Note that my rename of QEMUMachine member boot_order to
default_boot_order and QEMUMachineInitArgs member boot_device to
boot_order has a welcome side effect: it makes every use of boot
orders visible in this patch, for easy review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit 3984890181
pc: limit 64 bit hole to 2G by default
introduced a way for management to control
the window allocated to the 64 bit PCI hole.
This is useful, but existing management tools do not know how to set
this property. As a result, e.g. specifying a large ivshmem device with
size > 4G is broken by default. For example this configuration no
longer works:
-device ivshmem,size=4294967296,chardev=cfoo
-chardev socket,path=/tmp/sock,id=cfoo,server,nowait
Fix this by detecting that hole size was not specified
and defaulting to the backwards-compatible value of 1 << 62.
Cc: qemu-stable@nongnu.org
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A PCI device's DMA address space (possibly an IOMMU) is returned by a
method on the PCIBus. At the moment that only has one caller, so the
method is simply open coded. We'll need another caller for VFIO, so
this patch introduces a helper/wrapper function.
If IOMMU is not set, the pci_device_iommu_address_space() function
returns the parent's IOMMU skipping the "bus master" address space as
otherwise proper emulation would require more effort for no benefit.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[aik: added inheritance from parent if iommu is not set for the current bus]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Discontinue the jump-around-jump-to-jump scheme, trading it for a single
immediate move instruction. The two extra jumps always consume 7 bytes,
whereas the immediate move is either 5 or 7 bytes depending on where the
code_gen_buffer gets located.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Avoid a loop in the tlb_fill path; the fill will either succeed or
generate an exception.
Inline the slow_ld/st function; it was a complete copy of the main
helper except for the actual cross-page unaligned code, and the
compiler was inlining it anyway.
Add unlikely markers optimizing for the most common case of simple
tlb miss.
Make sure the compiler can optimize away the unaligned paths for a
1 byte access.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Allow the code that tcg generates to be less obtuse, passing in
the return address directly instead of computing it in the helper.
Maintain the old entrance point unchanged as an alternate entry point.
Delete the helper_st*_cmmu prototypes; the implementations did not exist.
Signed-off-by: Richard Henderson <rth@twiddle.net>
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
win32-aio: drop win32_aio_flush_cb()
aio-win32: replace incorrect AioHandler->opaque usage with ->e
aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
aio / timers: Remove legacy interface
aio / timers: Switch entire codebase to the new timer API
aio / timers: Add scripts/switch-timer-api
aio / timers: Add test harness for AioContext timers
aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
aio / timers: Convert rtc_clock to be a QEMUClockType
aio / timers: Remove main_loop_timerlist
aio / timers: Rearrange timer.h & make legacy functions call non-legacy
aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
aio / timers: Remove alarm timers
aio / timers: Add documentation and new format calls
aio / timers: Use all timerlists in icount warp calculations
aio / timers: Introduce new API timer_new and friends
aio / timers: On timer modification, qemu_notify or aio_notify
aio / timers: Convert mainloop to use timeout
aio / timers: Convert aio_poll to use AioContext timers' deadline
...
Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Remove the legacy interface from include/qemu/timers.h.
Ensure struct QEMUClock is not exposed at all.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert block_job_sleep_ns and co_sleep_ns to use the new timer
API.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert rtc_clock to be a QEMUClockType
Move rtc_clock users to use the new API
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now we have timerlistgroups implemented and main_loop_tlg, we
no longer need the concept of a default timer list associated
with each clock. Remove it and simplify initialisation of
clocks and timer lists.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rearrange timer.h so it is in order by function type.
Make legacy functions call non-legacy functions rather than vice-versa.
Convert cpus.c to use new API.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add utility functions qemu_clock_get_ms and qemu_clock_get_us
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove qemu_clock_deadline and qemu_timerlist_deadline now we are using
the ns functions throughout.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Remove alarm timers from qemu-timers.c now we use g_poll / ppoll
instead.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add documentation for existing qemu timer calls. Add new format
calls of the format timer_XXX rather than qemu_XXX_timer
for consistency.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Notify all timerlists derived from vm_clock in icount warp
calculations.
When calculating timer delay based on vm_clock deadline, use
all timerlists.
For compatibility, maintain an apparent bug where when using
icount, if no vm_clock timer was set, qemu_clock_deadline
would return INT32_MAX and always set an icount clock expiry
about 2 seconds ahead.
NB: thread safety - when different timerlists sit on different
threads, this will need some locking.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Introduce new API for creating timers - timer_new and
_ns, _ms, _us derivatives.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On qemu_mod_timer_ns, ensure qemu_notify or aio_notify is called to
end the appropriate poll(), irrespective of use_icount value.
On qemu_clock_enable, ensure qemu_notify or aio_notify is called for
all QEMUTimerLists attached to the QEMUClock.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add aio_timer_init and aio_timer_new wrapper functions.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a notify pointer to QEMUTimerList so it knows what to notify
on a timer change.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a QEMUTimerListGroup each AioContext (meaning a QEMUTimerList
associated with each clock is added) and delete it when the
AioContext is freed.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add QEMUTimerListGroup and helper functions, to represent
a QEMUTimerList associated with each clock. Add a default
QEMUTimerListGroup representing the default timer lists
which are not associated with any other object (e.g.
an AioContext as added by future patches).
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Split QEMUClock into QEMUClock and QEMUTimerList so that we can
have more than one QEMUTimerList associated with the same clock.
Introduce a main_loop_timerlist concept and make existing
qemu_clock_* calls that actually should operate on a QEMUTimerList
call the relevant QEMUTimerList implementations, using the clock's
default timerlist. This vastly reduces the invasiveness of this
change and means the API stays constant for existing users.
Introduce a list of QEMUTimerLists associated with each clock
so that reenabling the clock can cause all the notifiers
to be called. Note the code to do the notifications is added
in a later patch.
Switch QEMUClockType to an enum. Remove global variables vm_clock,
host_clock and rt_clock and add compatibility defines. Do not
fix qemu_next_alarm_deadline as it's going to be deleted.
Add qemu_clock_use_for_deadline to indicate whether a particular
clock should be used for deadline calculations. When use_icount
is true, vm_clock should not be used for deadline calculations
as it does not contain a nanosecond count. Instead, icount
timeouts come from the execution thread doing aio_notify or
qemu_notify as appropriate. This function is used in the next
patch.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make qemu_run_timers and qemu_run_all_timers return progress
so that aio_poll etc. can determine whether a timer has been
run.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add qemu_poll_ns which works like g_poll but takes a nanosecond
timeout.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Laszlo Ersek (8) and others
# Via Luiz Capitulino
* luiz/queue/qmp:
scripts/qapi.py: Avoid syntax not supported by Python 2.4
monitor: print the invalid char in error message
OptsVisitor: introduce unit tests, with test cases for range flattening
add "test-int128" and "test-bitops" to .gitignore
OptsVisitor: don't try to flatten overlong integer ranges
OptsVisitor: opts_type_uint64(): recognize intervals when LM_IN_PROGRESS
OptsVisitor: rebase opts_type_uint64() to parse_uint_full()
OptsVisitor: opts_type_int(): recognize intervals when LM_IN_PROGRESS
OptsVisitor: introduce list modes for interval flattening
OptsVisitor: introduce basic list modes
Convert stderr message calling error_get_pretty() to error_report()
Message-id: 1377015041-6567-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Add utility functions to qemu-timer.c for nanosecond timing.
Add qemu_clock_deadline_ns to calculate deadlines to
nanosecond accuracy.
Add utility function qemu_soonest_timeout to calculate soonest deadline.
Add qemu_timeout_ns_to_ms to convert a timeout in nanoseconds back to
milliseconds for when ppoll is not used.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename qemu_new_clock to qemu_clock_new.
Expose clock types.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Rename four functions in preparation for new API.
Rename qemu_timer_expired to timer_expired
Rename qemu_timer_expire_time_ns to timer_expire_time_ns
Rename qemu_timer_pending to timer_pending
Rename qemu_timer_expired_ns to timer_expired_ns
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
In 4146b46c42e0989cb5842e04d88ab6ccb1713a48 (block: Produce zeros when
protocols reading beyond end of file), we break qemu-iotests ./check
-qcow2 022. This happens because qcow2 temporarily sets ->growable = 1
for vmstate accesses (which are stored beyond the end of regular image
data).
We introduce the bs->zero_beyond_eof to allow qcow2_load_vmstate() to
disable ->zero_beyond_eof temporarily in addition to enable ->growable.
[Since the broken patch "block: Produce zeros when protocols reading
beyond end of file" has not been merged yet, I have applied this fix
*first* and will then apply the next patch to keep the tree bisectable.
-- Stefan]
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ROM files that are put in FW CFG are copied to guest ram, by BIOS, but
they are not backed by RAM so they don't get migrated.
Each time we change two bytes in such a ROM this breaks cross-version
migration: since we can migrate after BIOS has read the first byte but
before it has read the second one, getting an inconsistent state.
Future-proof this by creating, for each such ROM,
an MR serving as the backing store.
This MR is never mapped into guest memory, but it's registered
as RAM so it's migrated with the guest.
Naturally, this only helps for -M 1.7 and up, older machine types
will still have the cross-version migration bug.
Luckily the race window for the problem to trigger is very small,
which is also likely why we didn't notice the cross-version
migration bug in testing yet.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABCAAGBQJSE3WMAAoJEDwlJe0UNgzetMcP/0lKE1tRvXjUk78Jazqff/ET
op01vY5FiMurt9/ncV2kwTKGd5S/o8zmqf+3vbGijX9zlWMD1h1eJ/k8UeQxuCBf
XYIPZhLESpBl7ex6b7G4Z0TUTT3qdLqHKTrdEzzTiwbmo1eu8cF2zWGh7eeeK/pA
hX0BFlkBUo7SmlDOq4vj+88N3C+igcvE1UtOa9l17XpoLURkXZ0BFmy8Ew0f9iPj
uWH9prnUpYAvzektZqEEGZQV9p1CM8O06GkdMFMqSSEU/YBnZY1pJrS+dOOZ3676
PQuGGdkOEPqBsz0dHPVifFXySg471LIYFUJWYGY69Uw4kGIkb1rEBuO8d5eJuFbn
2UYUnxOSNw3atBaE2E3TCKCQSBjrlZ/WSnuz873I50qz+DBnQ5fagG5RYKySQJcR
UReC5WnWWwQh8oynx10lG6eggTSQZNxdHxF6VGTeygYPtuxlXdMPw+eveySxk6IH
a4fP1GzlDKIKh7O0yc2pyPF5UsqZ1JmIwrkmBuR7sgml7r0T4AaEndu8b9xYg94j
fHCgdLMFg5z8uWlzv5WzWX6PwYI9t46EWxHCk7x/Nrnp0WyF/XHhGipiS3AUOAQK
pQlLOA+ru0UVAHSFM4nCikNDqo4kxuM3BOt+ypw69f56ImnpqAGruUUgH/Ua9vze
DevOaXopdfsYczg6I+AF
=Qnph
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20130820' into staging
target-arm queue
# gpg: Signature made Tue 20 Aug 2013 08:56:28 AM CDT using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
# By Peter Maydell (20) and Peter Chubb (1)
# Via Peter Maydell
* pmaydell/tags/pull-target-arm-20130820: (21 commits)
hw/timer/imx_epit: Simplify and fix imx_epit implementation
default-configs: Fix A9MP and A15MP config names
hw/cpu/a15mpcore: Wire generic timer outputs to GIC inputs
target-arm: Implement the generic timer
target-arm: Support coprocessor registers which do I/O
target-arm: Allow raw_read() and raw_write() to handle 64 bit regs
hw/arm/pic_cpu: Remove the now-unneeded arm_pic_init_cpu()
hw/arm/xilinx_zynq: Don't use arm_pic_init_cpu()
hw/arm/vexpress: Don't use arm_pic_init_cpu()
hw/arm/versatilepb: Don't use arm_pic_init_cpu()
hw/arm/strongarm: Don't use arm_pic_init_cpu()
hw/arm/realview: Don't use arm_pic_init_cpu()
hw/arm/omap*: Don't use arm_pic_init_cpu()
hw/arm/musicpal: Don't use arm_pic_init_cpu()
hw/arm/kzm: Don't use arm_pic_init_cpu()
hw/arm/integratorcp: Don't use arm_pic_init_cpu()
hw/arm/highbank: Don't use arm_pic_init_cpu()
hw/arm/exynos4210: Don't use arm_pic_init_cpu()
hw/arm/armv7m: Don't use arm_pic_init_cpu()
target-arm: Make IRQ and FIQ gpio lines on the CPU object
...
Message-id: 1377007680-4934-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Prevent mistyped command line options from incurring high memory and CPU
usage at startup. 64K elements in a range should be enough for everyone
(TM).
The OPTS_VISITOR_RANGE_MAX macro is public so that unit tests can
construct corner cases with it.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Stefan Hajnoczi
# Via Stefan Hajnoczi
* stefanha/block-next:
aio: drop io_flush argument
tests: drop event_active_cb()
thread-pool: drop thread_pool_active()
dataplane/virtio-blk: drop flush_true() and flush_io()
block/ssh: drop return_true()
block/sheepdog: drop have_co_req() and aio_flush_request()
block/rbd: drop qemu_rbd_aio_flush_cb()
block/nbd: drop nbd_have_request()
block/linux-aio: drop qemu_laio_completion_cb()
block/iscsi: drop iscsi_process_flush()
block/gluster: drop qemu_gluster_aio_flush_cb()
block/curl: drop curl_aio_flush()
aio: stop using .io_flush()
tests: adjust test-thread-pool to new aio_poll() semantics
tests: adjust test-aio to new aio_poll() semantics
dataplane/virtio-blk: check exit conditions before aio_poll()
block: stop relying on io_flush() in bdrv_drain_all()
block: ensure bdrv_drain_all() works during bdrv_delete()
Message-id: 1376921877-9576-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
The .io_flush() handler no longer exists and has no users. Drop the
io_flush argument to aio_set_fd_handler() and related functions.
The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This will allow classes to specify a function to be called after all
instance_init functions were called.
This will be used by DeviceState to call qdev_prop_set_globals() at the
right moment.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Commit a0e372f0c4 reorganized the register
counting for GDB. While it seems correct not to let the total number of
registers skyrocket in an SMP scenario through a static variable, the
distinction between total register count and 'g' packet register count
(last_reg vs. num_g_regs) got lost among the way.
Fix this by introducing CPUState::gdb_num_g_regs and using that in
gdb_handle_packet().
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org (stable-1.6)
Tested-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move the code to hw/i386, the sole remaining property is available
as !pci_enabled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1376069702-22330-4-git-send-email-aliguori@us.ibm.com
Rebased.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This includes some last-minute bugfixes for 1.6.
All very small patches that also look very safe to me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJSCKrZAAoJECgfDbjSjVRpzWsH/2vJswTENyE1ws/fgs3QIxM/
YNGpOkxXGtfLB8EgkSchdEFytFidDE7VJZA/maRS3jY1/vZbd54qjlfBSaoWa27l
eaLMqjr5vdFQXJMn4WS1Fhv2HEiTRame8RxvCkLvv3SU87QzDxbwdvgTNUsDSREJ
OUBZLqEpyK5mf7e/qdFxxFUWuOGAfbQhMw3A8jYYxNbmczbSvawA/qthTgsXiyW4
t5Kak2GzQ5W5yLhhe3PhdoD/9XnG0qFKP2ZGha/PcrQjAi+7oCZl2qJ55V5MTHl8
mh8Q1Qpp/5SDeo6kKNVBQ5ysF9iUbrPxog44LnkVgX4F8/282/birt6VfeyKZbg=
=U+hn
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci,virtio fixes for 1.6
This includes some last-minute bugfixes for 1.6.
All very small patches that also look very safe to me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 12 Aug 2013 04:28:57 AM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (2) and others
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
vhost: clear signalled_used_valid on vhost stop
virtio: clear signalled_used_valid when switching from dataplane
i82801b11: Fix i82801b11 PCI host bridge config space
pc: disable pci-info for 1.6
Message-id: 1376308831-19978-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the dataplane thread stops, its vring.c implementation synchronizes
vring state back to virtio.c so we can continue emulating the virtio
device.
This patch ensures that virtio.c's signalled_used_valid flag is reset so
that we do not suppress guest notifications due to stale signalled_used
values.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Added an EventNotifier* parameter to
kvm-all.c:kvm_irqchip_add_irqfd_notifier(), in order to give KVM
another eventfd to be used as "resamplefd". See the documentation
in the linux kernel sources in Documentation/virtual/kvm/api.txt
(section 4.75) for more details.
When the added parameter is passed NULL, the behaviour of the
function is unchanged with respect to the previous versions.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While the machine is paused, in guest_phys_blocks_append() we register a
one-shot MemoryListener, solely for the initial collection of the valid
guest-physical memory ranges that happens at listener registration time.
For each range that is reported to guest_phys_blocks_region_add(), we
attempt to merge the range with the preceding one.
Ranges can only be joined if they are contiguous in both guest-physical
address space, and contiguous in host virtual address space.
The "maximal" ranges that remain in the end constitute the guest-physical
memory map that the dump will be based on.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The vmcore must use physical addresses that are visible to the guest, not
addresses that point into linear RAMBlocks. As first step, introduce the
list type into which we'll collect the physical mappings in effect at the
time of the dump.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Fix following bugs in "fallback implementation of counting semaphores
with mutex+condvar" added in c166cb72f1:
- waiting threads are not restarted properly if more than one threads
are waiting unblock signals in qemu_sem_timedwait()
- possible missing pthread_cond_signal(3) calls when waiting threads
are returned by ETIMEDOUT
- fix an uninitialized variable
The problem is analyzed by and fix is provided by Noriyuki Soda.
Also put additional cleanup suggested by Laszlo Ersek:
- make QemuSemaphore.count unsigned (it won't be negative)
- check a return value of in pthread_cond_wait() in qemu_sem_wait()
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1372841894-10634-1-git-send-email-tsutsui@ceres.dti.ne.jp
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As of bd5c51ee6c, chardevs no longer use
bottom-halves to issue CHR_EVENT_OPENED events. To maintain past
semantics, we instead defer the CHR_EVENT_OPENED events toward the end
of chardev initialization.
For muxes, this isn't good enough, since a range of FEs must be able
to attach to the mux prior to any CHR_EVENT_OPENED being issued, else
each FE will immediately print it's initial output (prompts, banners,
etc.) just prior to us switching to the next FE as part of
initialization.
The is new and confusing behavior for users, as they'll see output for
things like the HMP monitor, even though their the current mux focus
may be a guest serial port with potentially no output.
We fix this by further deferring CHR_EVENT_OPENED events for FEs
associated with muxes until after machine init by flagging mux chardevs
with 'explicit_be_open', which suppresses emission of CHR_EVENT_OPENED
events until we explicitly set the mux as opened later.
Currently, we must defer till after machine init since we potentially
associate FEs with muxes as part of realize (for instance,
serial_isa_realizefn).
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1375207462-8141-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
With this patch dump-guest-memory on s390 produces an ELF formatted,
crash-readable dump.
In order to implement this, the arch-specific part of dump-guest-memory
was added:
target-s390x/arch_dump.c contains the whole set of function for writing
Elf note sections of all types for s390x.
Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
[fixed indentation, use CamelCase, rename note_t to Note, use S390CPU]
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Spice has two display interface implementations: One integrated into
the qxl graphics card, and one generic which can operate with every
qemu-emulated graphics card.
The generic one is activated in case spice is used without qxl. The
logic for that only caught the "-vga qxl" case, "-device qxl-vga" goes
unnoticed. Fix that by adding a check in the spice interface
registration so we'll notice the qxl card no matter how it is created.
https://bugzilla.redhat.com/show_bug.cgi?id=981094
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It turns out that some 32 bit windows guests crash
if 64 bit PCI hole size is >2G.
Limit it to 2G for piix and q35 by default.
User may override default 64-bit PCI hole size by
using "pci-hole64-size" property.
Examples:
-global i440FX-pcihost.pci-hole64-size=4G
-global q35-pcihost.pci-hole64-size=4G
Reported-by: Igor Mammedov <imammedo@redhat.com>,
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-8-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a 'SIZE' type property to qdev.
Signed-off-by: Ian Molton <ian.molton@collabora.co.uk>
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-7-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-2-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move PCIEPort's "port" property to the new type, same for "aer_log_max".
Move PCIESlot's "chassis" and "slot" properties to the new type.
Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduce TYPE_PCI_BRIDGE as base type and use PCI_BRIDGE() casts.
Reviewed-by: Don Koch <dkoch@verizon.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
[AF: Updated pbm-bridge parent to TYPE_PCI_BRIDGE]
Signed-off-by: Andreas Färber <afaerber@suse.de>
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
dataplane: refuse to start if device is already in use
dataplane: enable virtio-blk x-data-plane=on live migration
migration: fix spice migration
migration: notify migration state before starting thread
block: Repair the throttling code.
gluster: Add image resize support
Message-id: 1375112172-24863-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Categorize devices that appear as output to "-device ?" command
by logical functionality. Sort the devices by logical categories
before showing them to user.
The sort is done by functionality rather than alphabetical.
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-3-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Made small tweaks in code to prevent compilation issues
when importing qemu/bitmap.h in qdev-core
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-2-git-send-email-marcel.a@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Basically, in HW the layout of the interrupt network is:
- One ICP per processor thread (the "presenter"). This contains the
registers to fetch a pending interrupt (ack), EOI, and control the
processor priority.
- One ICS per logical source of interrupts (ie, one per PCI host
bridge, and a few others here or there). This contains the per-interrupt
source configuration (target processor(s), priority, mask) and the
per-interrupt internal state.
Under PAPR, there is a single "virtual" ICS ... somewhat (it's a bit
oddball what pHyp does here, arguably there are two but we can ignore
that distinction). There is no register level access. A pair of firmware
(RTAS) calls is used to configure each virtual interrupt.
So our model here is somewhat the same. We have one ICS in the emulated
XICS which arguably *is* the emulated XICS, there's no point making it a
separate "device", that would just be gross, and each VCPU has an
associated ICP.
Yet we call the "XICS" struct icp_state and then the ICPs
'struct icp_server_state'. It's particularly confusing when all of the
functions have xics_prefixes yet take *icp arguments.
Rename:
struct icp_state -> XICSState
struct icp_server_state -> ICPState
struct ics_state -> ICSState
struct ics_irq_state -> ICSIRQState
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-12-git-send-email-aliguori@us.ibm.com
[aik: added ics_resend() on post_load]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
At present, the savevm / migration support for the pseries machine will not
work when KVM is enabled. That's because KVM manages the guest's hash page
table in the host kernel, so qemu has no visibility of it. This patch
fixes this by using new kernel interfaces to extract and reinsert the
guest's hash table during the migration process.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-id: 1374175984-8930-11-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the necessary support for saving the state of the PAPR virtual
PCI host bridge (or host bridges).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-10-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the necessary pieces to implement savevm / migration for the
pseries machine. The most complex part here is migrating the hash
table - for the paravirtualized pseries machine the guest's hash page
table is not stored within guest memory, but externally and the guest
accesses it via hypercalls.
This patch uses a hypervisor reserved bit of the HPTE as a dirty bit
(tracking changes to the HPTE itself, not the page it references).
This is used to implement a live migration style incremental save and
restore of the hash table contents.
Normally a hash table is 16MB but it can get bigger depending on how
much RAM the guest has. Due to its nature, updates to it are random so
the live migration style is used for it.
In addition it adds VMStateDescription information to save and restore
the (few) remaining pieces of state information needed by the pseries
machine.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-9-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Model TCE tables as a device that's hooked up as a child object to
the owner. Besides the code cleanup, we get a few nice benefits:
1) free actually works now (it was dead code before)
2) the TCE information is visible in the device tree
3) we can expose table information as properties such that if we
change the window_size, we can use globals to keep migration
working.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-id: 1374175984-8930-6-git-send-email-aliguori@us.ibm.com
[dwg: pseries: savevm support for PAPR TCE tables]
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[alexey: ppc kvm: fix to compile]
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds helpers to allow PAPR VIO devices to save state common
to all VIO devices during savevm.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1374175984-8930-3-git-send-email-aliguori@us.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Although the dataplane thread does not cooperate with dirty memory
logging yet it's fairly easy to temporarily disable dataplane during
live migration. This way virtio-blk can live migrate when
x-data-plane=on.
The dataplane thread will restart after migration is cancelled or if the
guest resuming virtio-blk operation after migration completes.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 29ae8a4133 ("rdma: introduce
MIG_STATE_NONE and change MIG_STATE_SETUP state transition") changed the
state transitions during migration setup.
Spice used to be notified with MIG_STATE_ACTIVE and it detected this
using migration_is_active(). Spice is now notified with
MIG_STATE_SETUP and migration_is_active() no longer works.
Replace migration_is_active() with migration_in_setup() to fix spice
migration.
Cc: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The throttling code was segfaulting since commit
02ffb50448 because some qemu_co_queue_next caller
does not run in a coroutine.
qemu_co_queue_do_restart assume that the caller is a coroutinne.
As suggested by Stefan fix this by entering the coroutine directly.
Also make sure like suggested that qemu_co_queue_next() and
qemu_co_queue_restart_all() can be called only in coroutines.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Bug description: QEMU currently gets all bits from GET_SUPPORTED_CPUID
for CPUID leaf 0xA and passes them directly to the guest. This makes
the guest ABI depend on host kernel and host CPU capabilities, and
breaks live migration if we migrate between hosts with different
capabilities (e.g., different number of PMU counters).
Add a "pmu" property to X86CPU, and set it to true only on "-cpu host",
or on pc-*-1.5 and older machine-types.
For now, setting pmu=on will enable the current passthrough mode that
doesn't have any ABI stability guarantees, but in the future we may
implement a mode where the PMU CPUID bits are stable and configurable.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Introduces a new Xen PV PCI device which will act as a binding point for
PV drivers for Xen.
The device has parameterized vendor-id, device-id and revision to allow to
be configured as a binding point for any vendor's PV drivers.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
* 'trivial-patches' of git://git.corpit.ru/qemu:
target-mips: Remove assignment to a variable which is never used
misc: Use g_assert_not_reached for code which is expected to be unreachable
qemu-options: mention C-a h in the -nographic doc
misc: Fix new typos in comments and strings
linux-user: correct argument number for sys_mremap and sys_splice
PPC: dbdma: macio: Fix format specifiers (build regression)
watchdog: Remove break after exit
exec: Remove env from list of poisoned names
hw/9pfs: Fix potential memory leak and avoid reuse of freed memory
timer: make timers_state static
aes: Remove unused code (NDEBUG, u16)
The Linux kernel can be configured to use 64KB pages, but it also
requires initrd to be page aligned. Therefore, to be safe, align the
initrd to 64KB using a new INITRD_PAGE_MASK rather than
TARGET_PAGE_MASK.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The global variable env was removed some time ago, so this name may be
used without any restriction now.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
