The SCLP boundary cross check is done by the Ultravisor for a
protected guest, hence we don't need to do it. As QEMU doesn't get a
valid SCCB address in protected mode this is even problematic and can
lead to QEMU reporting a false boundary cross error.
Fixes: db13387ca0 ("s390/sclp: rework sclp boundary checks")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Collin Walling <walling@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20201022103135.126033-2-frankja@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, a subsystem reset event leaves PCI devices enabled, causing
issues post-reset in the guest (an example would be after a kexec). These
devices need to be reset during a subsystem reset, allowing them to be
properly re-enabled afterwards. Add the S390 PCI host bridge to the list
of qdevs to be reset during subsystem reset.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: qemu-stable@nongnu.org
Message-Id: <1602767767-32713-1-git-send-email-mjrosato@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fix two heap-overflow reported by Alexander Bulekov while fuzzing:
- https://bugs.launchpad.net/qemu/+bug/1892960
- https://bugs.launchpad.net/qemu/+bug/1895310
CI jobs results:
. https://cirrus-ci.com/build/6399328187056128
. https://gitlab.com/philmd/qemu/-/pipelines/205701966
. https://travis-ci.org/github/philmd/qemu/builds/737708930
-----BEGIN PGP SIGNATURE-----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=9A05
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/sd-next-20201021' into staging
SD/MMC patches
Fix two heap-overflow reported by Alexander Bulekov while fuzzing:
- https://bugs.launchpad.net/qemu/+bug/1892960
- https://bugs.launchpad.net/qemu/+bug/1895310
CI jobs results:
. https://cirrus-ci.com/build/6399328187056128
. https://gitlab.com/philmd/qemu/-/pipelines/205701966
. https://travis-ci.org/github/philmd/qemu/builds/737708930
# gpg: Signature made Wed 21 Oct 2020 18:33:08 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd-gitlab/tags/sd-next-20201021:
hw/sd/sdcard: Assert if accessing an illegal group
hw/sd/sdcard: Do not attempt to erase out of range addresses
hw/sd/sdcard: Reset both start/end addresses on error
hw/sd/sdcard: Do not use legal address '0' for INVALID_ADDRESS
hw/sd/sdcard: Introduce the INVALID_ADDRESS definition
hw/sd/sdcard: Add trace event for ERASE command (CMD38)
hw/sd/sdhci: Yield if interrupt delivered during multiple transfer
hw/sd/sdhci: Let sdhci_update_irq() return if IRQ was delivered
hw/sd/sdhci: Resume pending DMA transfers on MMIO accesses
hw/sd/sdhci: Stop multiple transfers when block count is cleared
hw/sd/sdhci: Fix DMA Transfer Block Size field
hw/sd/sdhci: Document the datasheet used
hw/sd/sdhci: Fix qemu_log_mask() format string
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Removes opengl dependency from core qemu. The number of shared
libraries for qemu-system-x86_64 goes down from 66 to 60 on my system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-15-kraxel@redhat.com
Build spice core code as module. This removes libspice-server and a
handful of indirect dependencies from core qemu. The number of shared
libraries for qemu-system-x86_64 goes down from 73 to 66 on my system.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-13-kraxel@redhat.com
Allow modules depending on other modules.
module_load_file() gets the option to export symbols (by not adding the
G_MODULE_BIND_LOCAL flag).
module_load_one() will check the module dependency list to figure (a)
whenever are other modules must be loaded first, or (b) the module
should export the symbols.
The dependencies are specificed as static list in the source code for
now as I expect the list will stay small.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-11-kraxel@redhat.com
In case the spice opts are not registered, try loading the spice module.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-10-kraxel@redhat.com
Rename qmp_query_spice() to qmp_query_spice_real(), add to QemuSpiceOps.
Add new qmp_query_spice() function which calls the real function via
QemuSpiceOps if available, otherwise return SpiceInfo.enabled = false.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-9-kraxel@redhat.com
Add QemuSpiceOps struct. This struct holds function pointers to the
spice functions. It will be initialized with pointers to the stub
functions. When spice gets initialized the function pointers will
be re-written to the real functions.
The spice stubs will move from qemu-spice.h to spice-module.c for that,
because they will be needed for both "CONFIG_SPICE=n" and "CONFIG_SPICE=y
but spice module not loaded" cases.
This patch adds the infrastructure and starts with moving
qemu_spice_migrate_info() to QemuSpiceOps.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-3-kraxel@redhat.com
Add new spice-module.c + qemu-spice-module.h files. The code needed to
support modular spice will be there. For starters this will be only the
using_spice variable, more will follow ...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-2-kraxel@redhat.com
We can not have more group than 'wpgrps_size'.
Assert if we are accessing a group above this limit.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-7-f4bug@amsat.org>
While the Spec v3 is not very clear, v6 states:
If the host provides an out of range address as an argument
to CMD32 or CMD33, the card shall indicate OUT_OF_RANGE error
in R1 (ERX) for CMD38.
If an address is out of range, do not attempt to erase it:
return R1 with the error bit set.
Buglink: https://bugs.launchpad.net/qemu/+bug/1895310
Reported-by: Alexander Bulekov <alxndr@bu.edu>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-6-f4bug@amsat.org>
From the Spec "4.3.5 Erase":
The host should adhere to the following command
sequence: ERASE_WR_BLK_START, ERASE_WR_BLK_END and
ERASE (CMD38).
If an erase (CMD38) or address setting (CMD32, 33)
command is received out of sequence, the card shall
set the ERASE_SEQ_ERROR bit in the status register
and reset the whole sequence.
Reset both addresses if the ERASE command occured
out of sequence (one of the start/end address is
not set).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-5-f4bug@amsat.org>
As it is legal to WRITE/ERASE the address/block 0,
change the value of this definition to an illegal
address: UINT32_MAX.
Unfortunately this break the migration stream, so
bump the VMState version number. This affects some
ARM boards and the SDHCI_PCI device (which is only
used for testing).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-4-f4bug@amsat.org>
'0' is used as a value to indicate an invalid (or unset)
address. Use a definition instead of a magic value.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-3-f4bug@amsat.org>
Trace addresses provided to the ERASE command.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201015063824.212980-2-f4bug@amsat.org>
The Descriptor Table has a bit to allow the DMA to generates
Interrupt when the operation of the descriptor line is completed
(see "1.13.4. Descriptor Table" of 'SD Host Controller Simplified
Specification Version 2.00').
If we have pending interrupt and the descriptor requires it
to be generated as soon as it is completed, reschedule pending
transfers and yield to the CPU.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-5-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-4-f4bug@amsat.org>
If we have pending DMA requests scheduled, process them first.
So far we don't need to implement a bottom half to process them.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200903172806.489710-3-f4bug@amsat.org>
Add datasheet name in the file header.
We can not add the direct download link since there is a disclaimers
to agree first on the SD Association website (www.sdcard.org).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200901140411.112150-3-f4bug@amsat.org>
Add missing newline character in qemu_log_mask() format.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200901140411.112150-2-f4bug@amsat.org>
USB_XHCI does not depend on PCI any more.
USB_XHCI_SYSBUS must select USB_XHCI not USB.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-5-kraxel@redhat.com
The helper generates an acpi dsdt device entry
for the xhci sysbus device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201020074844.5304-4-kraxel@redhat.com
Move a bunch of defines which might be needed outside core xhci
code to that place. Add XHCI_ prefixes to avoid name clashes.
No functional change.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Message-id: 20201020074844.5304-3-kraxel@redhat.com
Add stubs for aml_interrupt and aml_memory32_fixed,
these will be needed by followup patches,
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201020074844.5304-2-kraxel@redhat.com
Setting x86ms->pci_irq_mask to zero has the same effect,
so we don't need the has_pci argument any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201016113835.17465-6-kraxel@redhat.com
Makes sure the PCI interrupt overrides are added to the
APIC table in case PCIe is enabled.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201016113835.17465-5-kraxel@redhat.com
Add a variable to x86 machine state instead of
hard-coding the PCI interrupts.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201016113835.17465-4-kraxel@redhat.com
