On Windows there is no path like /tmp/s_local_disk.XXXXXX
Use g_get_tmp_dir instead of /tmp.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-8-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Disable following tests on msys2/mingw
'test-crypto-tlscredsx509': ['crypto-tls-x509-helpers.c', 'pkix_asn1_tab.c',
tasn1, crypto],
'test-crypto-tlssession': ['crypto-tls-x509-helpers.c', 'pkix_asn1_tab.c', 'crypto-tls-psk-helpers.c',
tasn1, crypto],
'test-io-channel-tls': ['io-channel-helpers.c', 'crypto-tls-x509-helpers.c', 'pkix_asn1_tab.c',
tasn1, io, crypto]}
These tests are failure with:
ERROR test-crypto-tlscredsx509 - missing test plan
ERROR test-crypto-tlssession - missing test plan
ERROR test-io-channel-tls - missing test plan
Because on win32 those test case are all disabled.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200909094617.1582-12-luoyonggang@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200907200432.2418-3-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
drain_call_rcu is necessary on win32, because under win32, if you
don't close the file before remove it, the remove would be fail.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Message-Id: <20200915121318.247-23-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
g_autofree are prefer than g_free when possible.
Signed-off-by: Yonggang Luo <luoyonggang@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200915121318.247-17-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This will allow is to preserve the semantics of hmp_device_del,
that the device is deleted immediatly which was changed by previos
patch that delayed this to RCU callback
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Suggested-by: Stefan Hajnoczi <stefanha@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200915121318.247-2-luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When compiling QEMU with MSYS2 on Windows, there is currently the
following error:
../qga/commands-win32.c:62:24: error: redundant redeclaration of
'CM_Get_DevNode_PropertyW' [-Werror=redundant-decls]
62 | CMAPI CONFIGRET WINAPI CM_Get_DevNode_PropertyW(
| ^~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../qga/commands-win32.c:26:
C:/tools/msys64/mingw64/x86_64-w64-mingw32/include/cfgmgr32.h:840:26: note:
previous declaration of 'CM_Get_DevNode_PropertyW' was here
840 | CMAPI CONFIGRET WINAPI CM_Get_DevNode_PropertyW(DEVINST dnDevInst,
const DEVPROPKEY *PropertyKey, DEVPROPTYPE *PropertyType, PBYTE PropertyBuffer,
PULONG PropertyBufferSize, ULONG ulFlags);
Seems like this protype is sometimes available in the cfgmgr32.h
header, and sometimes not. Let's silence the compiler warning here
to let the build pass with -Werror, too.
Message-Id: <20200915114757.55635-1-thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Now that we always do out-of-tree builds (and the in-tree builds are
faked via a "build" directory), we can simplify out .gitignore file
quite a bit.
Message-Id: <20200909080305.258961-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests/test-char test is currently always failing on my system since
the getaddrinfo() in socket_can_bind_connect() returns EAI_NONAME when
it is called from socket_check_protocol_support() to check for IPv6.
socket_check_protocol_support() then returns -1 and thus the tests are
not run at all - even though IPv4 is working fine.
socket_can_bind_connect() connect should return EADDRNOTAVAIL in this
case instead, so that socket_check_protocol_support() does not fail.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200908121543.222872-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We simply want to ignore certain queries here, so let's rather
use the term 'ignore' to express this intention.
Message-Id: <20200914163755.42618-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Telling QTest to log to /dev/fd/2, essentially results in dup(2). This
is fine, if other code isn't logging to stderr. Otherwise, the order of
the logs is mixed due to buffering issues, since two file-descriptors
are used to write to the same file. We can avoid this, since just
specifying "-qtest" sets the log fd to stderr. If we want to disable
qtest logs, we can just add -qtest-log none.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20200819061110.1320568-2-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On macOS, (out of the box) readlink does not have -f. We do not really
need readlink here, though, it was just a replacement for realpath
(which is not available on our BSD test systems), which we needed to
make the $(dirname) into an absolute path.
Instead of using either, just use "cd; pwd" like is done for
$source_iotests.
Fixes: b1cbc33a39
("iotests: Allow running from different directory")
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Claudio Fontana <cfontana@suse.de>
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200914145606.94620-1-mreitz@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Only build virtio-gpu-device modular (the code which actually depends on
the external virglrenderer library). virtio-gpu-pci and virtio-vga are
compiled into core qemu still.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200914134224.29769-7-kraxel@redhat.com
Reference it via ops pointer instead, simliar to the vga one.
Removes hard symbol reference, needed to build virtio-gpu modular.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200914134224.29769-6-kraxel@redhat.com
We should add sources to the softmmu_ss or module_ss but not both.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200914134224.29769-4-kraxel@redhat.com
Use all config symbols not only the host ones.
Needed to make sure device configs like CONFIG_QXL
are used for modules too.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200914134224.29769-3-kraxel@redhat.com
Back in 2018 we introduced support for killing the whole QEMU process
instead of just one thread, when a seccomp rule is violated:
commit bda08a5764
Author: Marc-André Lureau <marcandre.lureau@redhat.com>
Date: Wed Aug 22 19:02:48 2018 +0200
seccomp: prefer SCMP_ACT_KILL_PROCESS if available
Fast forward a year and we introduced a patch to avoid killing the
process for resource control syscalls tickled by Mesa.
commit 9a1565a03b
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Mar 13 09:49:03 2019 +0000
seccomp: don't kill process for resource control syscalls
Unfortunately a logic bug effectively reverted the first commit
mentioned so that we go back to only killing the thread, not the whole
process.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
- Several qcow2 fixes and refactorings
- Let qemu-img convert try to stay at cluster boundaries
- Stable child names for quorum (with x-blockdev-change)
- Explicitly drop vhdx 4k sector support, as it was never actually
working
- rbd: Mark @namespace a strong runtime option
- iotests.py improvements
- Drop unused runtime_opts objects
- Skip a test case in 030 when run through make check-block
-----BEGIN PGP SIGNATURE-----
iQFFBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl9glvkSHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9A/0cH+MR1uFlqNuL4Q8vnZPyEEB6FniWgIF/K
oMivXdZe9F5UjUPx+2I8iOpzBnT+lMGQZzaNSOZtI9Rv6JqBTjA9xlVWyVo5SVzF
cNfVE00lCnBRsYGiycOkOyTnP0PuxlFJDRwdozgumch3akN/0Ep9npL7So2BMwVf
hrPH4VVAihf0ZZaEH9JN2Sgm8/ffpXFcGtg8uoS1NqgK42fGWp4sip6mPFulNDBE
4HFLv98/hKqBlU5+sYe9mKo7SJSbqEXMxR7AHmDxM9qBbzFF2SPkZoSEaZlqw+bz
YlR/EDVVbAAAOfKeG8DPjfNwZHVdusMmOpzKTG9QhEOxyK2Vbef1lQ==
=7AVw
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2020-09-15' into staging
Block patches:
- Several qcow2 fixes and refactorings
- Let qemu-img convert try to stay at cluster boundaries
- Stable child names for quorum (with x-blockdev-change)
- Explicitly drop vhdx 4k sector support, as it was never actually
working
- rbd: Mark @namespace a strong runtime option
- iotests.py improvements
- Drop unused runtime_opts objects
- Skip a test case in 030 when run through make check-block
# gpg: Signature made Tue 15 Sep 2020 11:27:05 BST
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2020-09-15: (22 commits)
block/rbd: add 'namespace' to qemu_rbd_strong_runtime_opts[]
qcow2: Convert qcow2_alloc_cluster_offset() into qcow2_alloc_host_offset()
qcow2: Make preallocate_co() resize the image to the correct size
block/qcow: remove runtime opts
block/rbd: remove runtime_opts
qcow2: Return the original error code in qcow2_co_pwrite_zeroes()
qcow2: Make qcow2_free_any_clusters() free only one cluster
qcow2: Handle QCowL2Meta on error in preallocate_co()
block/vhdx: Support vhdx image only with 512 bytes logical sector size
iotests: Skip test_stream_parallel in test 030 when doing "make check"
qemu-img: Explicit number replaced by a constant
qcow2: Rewrite the documentation of qcow2_alloc_cluster_offset()
qcow2: Don't check nb_clusters when removing l2meta from the list
qcow2: Fix removal of list members from BDRVQcow2State.cluster_allocs
qcow2: Use macros for the L1, refcount and bitmap table entry sizes
qemu-img: avoid unaligned read requests during convert
block/quorum.c: stable children names
qemu-iotests: Simplify FilePath __init__
qemu-iotests: Merge FilePaths and FilePath
qemu-iotests: Support varargs syntax in FilePaths
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Previous patch introduced a performance warning being logged on host
side if client connected with an 'msize' <= 8192. Disable this
performance warning for the synth driver to prevent that warning from
being printed whenever the 9pfs (qtest) test cases are running.
Introduce a new export flag V9FS_NO_PERF_WARN for that purpose, which
might also be used to disable such warnings from the CLI in future.
We could have also prevented the warning by simply raising P9_MAX_SIZE
in virtio-9p-test.c to any value larger than 8192, however in the
context of test cases it makes sense running for edge cases, which
includes the lowest 'msize' value supported by the server which is
4096, hence we want to preserve an msize of 4096 for the test client.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1kEyDy-0006nN-5A@lizzy.crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
It is essential to choose a reasonable high value for 'msize' to avoid
severely degraded file I/O performance. This parameter can only be
chosen on client/guest side, and a Linux client defaults to an 'msize'
of only 8192 if the user did not explicitly specify a value for 'msize',
which results in very poor file I/O performance.
Unfortunately many users are not aware that they should specify an
appropriate value for 'msize' to avoid severe performance issues, so
log a performance warning (with a QEMU wiki link explaining this issue
in detail) on host side in that case to make it more clear.
Currently a client cannot automatically pick a reasonable value for
'msize', because a good value for 'msize' depends on the file I/O
potential of the underlying storage on host side, i.e. a feature
invisible to the client, and even then a user would still need to trade
off between performance profit and additional RAM costs, i.e. with
growing 'msize' (RAM occupation), performance still increases, but
performance delta will shrink continuously.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <e6fc84845c95816ad5baecb0abd6bfefdcf7ec9f.1599144062.git.qemu_oss@crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Commit 19ae9ae014 ("block/rbd: Add support for ceph namespaces")
introduced namespace support for RBD, but we forgot to add the
new 'namespace' options to qemu_rbd_strong_runtime_opts[].
The 'namespace' is used to identify the image, so it is a strong
option since it can changes the data of a BDS.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1821528
Fixes: 19ae9ae014 ("block/rbd: Add support for ceph namespaces")
Cc: Florian Florensa <fflorensa@online.net>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200914190553.74871-1-sgarzare@redhat.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
qcow2_alloc_cluster_offset() takes an (unaligned) guest offset and
returns the (aligned) offset of the corresponding cluster in the qcow2
image.
In practice none of the callers need to know where the cluster starts
so this patch makes the function calculate and return the final host
offset directly. The function is also renamed accordingly.
See 388e581615 for a similar change to qcow2_get_cluster_offset().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <9bfef50ec9200d752413be4fc2aeb22a28378817.1599833007.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function preallocates metadata structures and then extends the
image to its new size, but that new size calculation is wrong because
it doesn't take into account that the host_offset variable is always
cluster-aligned.
This problem can be reproduced with preallocation=metadata when the
original size is not cluster-aligned but the new size is. In this case
the final image size will be shorter than expected.
qemu-img create -f qcow2 img.qcow2 31k
qemu-img resize --preallocation=metadata img.qcow2 128k
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <adeb8b059917b141d5f5b3bd2a016262d3052c79.1599833007.git.berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
[mreitz: Mark compat=0.10 unsupported for iotest 125]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Introduced by d85f4222b4,
These were seemingly never used at all.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200806211345.2925343-3-jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This saw its last use in 4bfb274165.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20200806211345.2925343-2-jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function checks the current status of a (sub)cluster in order to
see if an unaligned 'write zeroes' request can be done efficiently by
simply updating the L2 metadata and without having to write actual
zeroes to disk.
If the situation does not allow using the fast path then the function
returns -ENOTSUP and the caller falls back to writing zeroes.
If can happen however that the aforementioned check returns an actual
error code so in this case we should pass it to the caller.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200909123739.719-1-berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This function takes an L2 entry and a number of clusters to free.
Although in principle it can free any type of cluster (using the L2
entry to determine its type) in practice the API is broken because
compressed clusters have a variable size and there is no way to free
more than one without having the L2 entry of each one of them.
The good news all callers are passing nb_clusters=1 so we can simply
get rid of that parameter.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <77cea0f4616f921d37e971b3c5b18a2faa24b173.1599573989.git.berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If qcow2_alloc_cluster_offset() or qcow2_alloc_cluster_link_l2() fail
then this function simply returns the error code, potentially leaking
the QCowL2Meta structure and leaving stale items in s->cluster_allocs.
A second problem is that this function calls qcow2_free_any_clusters()
on failure but passing a host cluster offset instead of an L2 entry.
Luckily for normal uncompressed clusters a raw offset also works like
a valid L2 entry so it works just the same, but we should be using
qcow2_free_clusters() instead.
This patch fixes both problems by using qcow2_handle_l2meta().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <cd3a6b9abd43f9c0b60be413d760f0cacc67eb66.1599573989.git.berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
block/vhdx uses qemu block layer where sector size is always 512 bytes.
This may have issues with 4K logical sector sized vhdx image.
For e.g qemu-img convert on such images fails with following assert:
$qemu-img convert -f vhdx -O raw 4KTest1.vhdx test.raw
qemu-img: util/iov.c:388: qiov_slice: Assertion `offset + len <=
qiov->size' failed.
Aborted
This patch adds an check to return ENOTSUP for vhdx images which
have logical sector size other than 512 bytes.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Message-Id: <1596794594-44531-1-git-send-email-swapnil.ingle@nutanix.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The test_stream_parallel test still occasionally fails in the CI.
Thus let's disable it during "make check" for now so that it does
not cause trouble during merge tests. We can enable it again once
the problem has been resolved.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200907113824.134788-1-thuth@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Yi Li <yili@winhong.com>
Message-Id: <20200819013607.32280-1-yili@winhong.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The current text corresponds to an earlier, simpler version of this
function and it does not explain how it works now.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <bb5bd06f07c5a05b0818611de0d06ec5b66c8df3.1599150873.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In the past, when a new cluster was allocated the l2meta structure was
a variable in the stack so it was necessary to have a way to tell
whether it had been initialized and contained valid data or not. The
nb_clusters field was used for this purpose. Since commit f50f88b9fe
this is no longer the case, l2meta (nowadays a pointer to a list) is
only allocated when needed and nb_clusters is guaranteed to be > 0 so
this check is unnecessary.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <ab0b67c29c7ba26e598db35f12aa5ab5982539c1.1599150873.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When a write request needs to allocate new clusters (or change the L2
bitmap of existing ones) a QCowL2Meta structure is created so the L2
metadata can be later updated and any copy-on-write can be performed
if necessary.
A write request can span a region consisting of an arbitrary
combination of previously unallocated and allocated clusters, and if
the unallocated ones can be put contiguous to the existing ones then
QEMU will do so in order to minimize the number of write operations.
In practice this means that a write request has not just one but a
number of QCowL2Meta structures. All of them are added to the
cluster_allocs list that is stored in BDRVQcow2State and is used to
detect overlapping requests. After the write request finishes all its
associated QCowL2Meta are removed from that list. calculate_l2_meta()
takes care of creating and putting those structures in the list, and
qcow2_handle_l2meta() takes care of removing them.
The problem is that the error path in handle_alloc() also tries to
remove an item in that list, a remnant from the time when this was
handled there (that code would not even be correct anymore because
it only removes one struct and not all the ones from the same write
request).
This can trigger a double removal of the same item from the list,
causing a crash. This is not easy to reproduce in practice because
it requires that do_alloc_cluster_offset() fails after a successful
previous allocation during the same write request, but it can be
reproduced with the included test case.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <3440a1c4d53c4fe48312b478c96accb338cbef7c.1599150873.git.berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch replaces instances of sizeof(uint64_t) in the qcow2 driver
with macros that indicate what those sizes are actually referring to.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-Id: <20200828110828.13833-1-berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
in case of large continous areas that share the same allocation status
it happens that the value of s->sector_next_status is unaligned to the
cluster size or even request alignment of the source. Avoid this by
stripping down the s->sector_next_status position to cluster boundaries.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <20200901125129.6398-1-pl@kamp.de>
[mreitz: Disable vhdx for 251]
Signed-off-by: Max Reitz <mreitz@redhat.com>
If we remove the child with the highest index from the quorum,
decrement s->next_child_index. This way we get stable children
names as long as we only remove the last child.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Fixes: https://bugs.launchpad.net/bugs/1881231
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-Id: <5d5f930424c1c770754041aa8ad6421dc4e2b58e.1596536719.git.lukasstraub2@web.de>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Use list comprehension instead of append loop.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200828232152.205833-6-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
FilePath creates now one temporary file:
with FilePath("a") as a:
Or more:
with FilePath("a", "b", "c") as (a, b, c):
This is also the behavior of the file_path() helper, used by some of the
tests. Now we have only 2 helpers for creating temporary files instead
of 3.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200828232152.205833-5-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Accept variable number of names instead of a sequence:
with FilePaths("a", "b", "c") as (a, b, c):
The disadvantage is that base_dir must be used as kwarg:
with FilePaths("a", "b", base_dir=soc_dir) as (sock1, sock2):
But this is more clear and calling optional argument as positional
arguments is bad idea anyway.
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200828232152.205833-4-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
When this class was extracted from FilePath, the docstring was not
updated for generating multiple files, and the example usage was
referencing unrelated file.
While fixing the docstring, add example for creating sockets, which
should use iotests.sock_dir instead of the default base_dir.
Fixes: de263986b5
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-Id: <20200828232152.205833-3-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If os.remove() fails to remove one of the paths, for example if the file
was removed by the test, the cleanup loop would exit silently, without
removing the rest of the files.
Fixes: de263986b5
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200828232152.205833-2-nsoffer@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
* hw/misc/a9scu: Minor cleanups
* hw/timer/armv7m_systick: assert that board code set system_clock_scale
* decodetree: Improve identifier matching
* target/arm: Clean up neon fp insn size field decode
* target/arm: Remove KVM support for 32-bit Arm hosts
* hw/arm/mps2: New board models mps2-an386, mps2-an500
* Deprecate Unicore32 port
* Deprecate lm32 port
* target/arm: Count PMU events when MDCR.SPME is set
* hw/arm: versal-virt: Correct the tx/rx GEM clocks
* New Nuvoton iBMC board models npcm750-evb, quanta-gsj
-----BEGIN PGP SIGNATURE-----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=mWuB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20200914-1' into staging
* hw/misc/a9scu: Do not allow invalid CPU count
* hw/misc/a9scu: Minor cleanups
* hw/timer/armv7m_systick: assert that board code set system_clock_scale
* decodetree: Improve identifier matching
* target/arm: Clean up neon fp insn size field decode
* target/arm: Remove KVM support for 32-bit Arm hosts
* hw/arm/mps2: New board models mps2-an386, mps2-an500
* Deprecate Unicore32 port
* Deprecate lm32 port
* target/arm: Count PMU events when MDCR.SPME is set
* hw/arm: versal-virt: Correct the tx/rx GEM clocks
* New Nuvoton iBMC board models npcm750-evb, quanta-gsj
# gpg: Signature made Mon 14 Sep 2020 16:02:06 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20200914-1: (32 commits)
tests/acceptance: console boot tests for quanta-gsj
docs/system: Add Nuvoton machine documentation
hw/arm/npcm7xx: add board setup stub for CPU and UART clocks
hw/arm: Wire up BMC boot flash for npcm750-evb and quanta-gsj
hw/ssi: NPCM7xx Flash Interface Unit device model
hw/mem: Stubbed out NPCM7xx Memory Controller model
hw/nvram: NPCM7xx OTP device model
hw/arm: Load -bios image as a boot ROM for npcm7xx
roms: Add virtual Boot ROM for NPCM7xx SoCs
hw/arm: Add two NPCM7xx-based machines
hw/arm: Add NPCM730 and NPCM750 SoC models
hw/timer: Add NPCM7xx Timer device model
hw/misc: Add NPCM7xx Clock Controller device model
hw/misc: Add NPCM7xx System Global Control Registers device model
hw/arm: versal-virt: Correct the tx/rx GEM clocks
target/arm: Count PMU events when MDCR.SPME is set
Deprecate lm32 port
Deprecate Unicore32 port
docs/system/arm/mps2.rst: Make board list consistent
hw/arm/mps2: New board model mps2-an500
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds two acceptance tests for the quanta-gsj machine.
One test downloads a lightly patched openbmc flash image from github and
verifies that it boots all the way to the login prompt.
The other test downloads a kernel, initrd and dtb built from the same
openbmc source and verifies that the kernel detects all CPUs and boots
to the point where it can't find the root filesystem (because we have no
flash image in this case).
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-15-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When booting directly into a kernel, bypassing the boot loader, the CPU and
UART clocks are not set up correctly. This makes the system appear very
slow, and causes the initrd boot test to fail when optimization is off.
The UART clock must run at 24 MHz. The default 25 MHz reference clock
cannot achieve this, so switch to PLL2/2 @ 480 MHz, which works
perfectly with the default /20 divider.
The CPU clock should run at 800 MHz, so switch it to PLL1/2. PLL1 runs
at 800 MHz by default, so we need to double the feedback divider as well
to make it run at 1600 MHz (so PLL1/2 runs at 800 MHz).
We don't bother checking for PLL lock because we know our emulated PLLs
lock instantly.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-id: 20200911052101.2602693-13-hskinnemoen@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
