Commit Graph

262 Commits

Author SHA1 Message Date
Max Reitz
baead0abef hmp: Add read-only-mode option to change command
Expose the new read-only-mode option of 'blockdev-change-medium' for the
'change' HMP command.

Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-11 16:25:47 +01:00
Dr. David Alan Gilbert
4886a1bcb7 migrate_start_postcopy: Command to trigger transition to postcopy
Once postcopy is enabled (with migrate_set_capability), the migration
will still start on precopy mode.  To cause a transition into postcopy
the:

  migrate_start_postcopy

command must be issued.  Postcopy will start sometime after this
(when it's next checked in the migration loop).

Issuing the command before migration has started will error,
and issuing after it has finished is ignored.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-10 15:00:26 +01:00
Daniel P. Berrange
6287d827d4 monitor: allow device_del to accept QOM paths
Currently device_del requires that the client provide the
device short ID. device_add allows devices to be created
without giving an ID, at which point there is no way to
delete them with device_del. The QOM object path, however,
provides an alternative way to identify the devices.

Allowing device_del to accept an object path ensures all
devices are deletable regardless of whether they have an
ID.

 (qemu) device_add usb-mouse
 (qemu) qom-list /machine/peripheral-anon
 device[0] (child<usb-mouse>)
 type (string)
 (qemu) device_del /machine/peripheral-anon/device[0]

Devices are required to be marked as hotpluggable
otherwise an error is raised

 (qemu) device_del /machine/unattached/device[4]
 Device 'PIIX3' does not support hotplugging

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1441974836-17476-1-git-send-email-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message touched up, accidental white-space change dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-22 11:31:56 +02:00
Pavel Butsykin
2cd8af2d44 monitor: added generation of documentation for hmp-commands-info.hx
It will be easier if you need to add info-commands to edit
only hmp-commands-info.hx, before this had to edit monitor.c and
hmp-commands.hx.

From the build point of view all documentation is saved into
qemu-monitor-info.texi which from now on is used for all user
documentation building.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-5-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16 17:33:33 +02:00
Pavel Butsykin
70703344de hmp-commands.hx: fix end of table info
The table info(information about the system state) closes earlier
and some of its elements are outside(trace-events, rocker, etc). This
can be confusing and lead to additional bugs.

Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-4-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16 17:33:33 +02:00
Ting Wang
62313160cb hmp: add info iothreads command
Make "info iothreads" available on the HMP monitor.

For example, the results are as follows when executing qemu
command with "-object iothread,id=iothread-1 -object
iothread,id=iothread-2".
(qemu) info iothreads
iothread-1: thread_id=123
iothread-2: thread_id=456

Signed-off-by: Ting Wang <kathy.wangting@huawei.com>
Message-Id: <1435306033-58372-1-git-send-email-kathy.wangting@huawei.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Amos Jianjun Kong <kongjianjun@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-09-04 13:26:26 +02:00
Peter Maydell
b041066421 -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
 
 iQEcBAABAgAGBQJV6F1cAAoJEJykq7OBq3PIvvgH/0UMyYBRdzm9XkN5fV9kPZmQ
 RK2NVm5pBAy8qVH8FOneYvmY2X3npLGhB/+JfQMjGgXuHkD/GeIonMbhJGuukFKh
 b7oPU7hb5J4N7Wp+aH8gUL+F3WwGQWcAhXPJgK8HbBQqWKxsAtHZmzaDTmKCpNid
 Ujd7O6f6ygtGIVzz1PsOeU9S38S3XdY1y26RXbJjdHg1ZMpF49h+XQ0mVmQSLp6c
 rlZRjXJjvDVKL5alf5UFHquZujof8n4nIpsSBtzne/ZpujGCpsZV/TaqKiU8vj38
 PiBtBozKr2IocCPkS9RjBorJLADQsUjsmqdLpPynC+BUKkgY5gRSnlpfYarMXao=
 =Uc38
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging

# gpg: Signature made Thu 03 Sep 2015 15:46:52 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/tracing-pull-request:
  trace-events: Add hmp completion

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-03 16:17:28 +01:00
Dr. David Alan Gilbert
987bd27000 trace-events: Add hmp completion
Add completion for the trace event names in the hmp trace-event
command.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1439548063-18410-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-09-03 15:46:10 +01:00
Jason J. Herne
a08f0081c9 s390x: Info skeys sub-command
Provide an  info skeys hmp sub-command to allow the end user to dump a storage
key for a given address. This is useful for guest operating system developers.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-03 12:17:54 +02:00
Jason J. Herne
a4538a5cc5 s390x: Dump-skeys hmp support
Add dump-skeys command to the human monitor.

Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-09-03 12:17:54 +02:00
Scott Feldman
fafa4d508b qmp/hmp: add rocker device support
Add QMP/HMP support for rocker devices.  This is mostly for debugging purposes
to see inside the device's tables and port configurations.  Some examples:

(qemu) info rocker sw1
name: sw1
id: 0x0000013512005452
ports: 4

(qemu) info rocker-ports sw1
            ena/    speed/ auto
      port  link    duplex neg?
     sw1.1  up     10G  FD  No
     sw1.2  up     10G  FD  No
     sw1.3  !ena   10G  FD  No
     sw1.4  !ena   10G  FD  No

(qemu) info rocker-of-dpa-flows sw1
prio tbl hits key(mask) --> actions
2    60       pport 1 vlan 1 LLDP src 00:02:00:00:02:00 dst 01:80:c2:00:00:0e
2    60       pport 1 vlan 1 ARP src 00:02:00:00:02:00 dst 00:02:00:00:03:00
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:00:02 proto 58
3    50       vlan 2 dst 33:33:ff:00:00:02 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 IPv6 src 00:02:00:00:03:00 dst 33:33:ff:00:03:00 proto 58
3    50  1    vlan 2 dst 33:33:ff:00:03:00 --> write group 0x32000001 goto tbl 60
2    60       pport 2 vlan 2 ARP src 00:02:00:00:03:00 dst 00:02:00:00:02:00
3    50  2    vlan 2 dst 00:02:00:00:02:00 --> write group 0x02000001 goto tbl 60
2    60  1    pport 2 vlan 2 IP src 00:02:00:00:03:00 dst 00:02:00:00:02:00 proto 1
3    50  2    vlan 1 dst 00:02:00:00:03:00 --> write group 0x01000002 goto tbl 60
2    60  1    pport 1 vlan 1 IP src 00:02:00:00:02:00 dst 00:02:00:00:03:00 proto 1
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:00:01 proto 58
3    50       vlan 1 dst 33:33:ff:00:00:01 --> write group 0x31000000 goto tbl 60
2    60       pport 1 vlan 1 IPv6 src 00:02:00:00:02:00 dst 33:33:ff:00:02:00 proto 58
3    50  1    vlan 1 dst 33:33:ff:00:02:00 --> write group 0x31000000 goto tbl 60
1    60  173  pport 2 vlan 2 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x02000000
1    60  6    pport 2 vlan 2 IPv6 src <any> dst <any> --> write group 0x02000000
1    60  174  pport 1 vlan 1 LLDP src <any> dst 01:80:c2:00:00:0e --> write group 0x01000000
1    60  174  pport 2 vlan 2 IP src <any> dst <any> --> write group 0x02000000
1    60  6    pport 1 vlan 1 IPv6 src <any> dst <any> --> write group 0x01000000
1    60  181  pport 2 vlan 2 ARP src <any> dst <any> --> write group 0x02000000
1    10  715  pport 2 --> apply new vlan 2 goto tbl 20
1    60  177  pport 1 vlan 1 ARP src <any> dst <any> --> write group 0x01000000
1    60  174  pport 1 vlan 1 IP src <any> dst <any> --> write group 0x01000000
1    10  717  pport 1 --> apply new vlan 1 goto tbl 20
1    0   1432 pport 0(0xffff) --> goto tbl 10

(qemu) info rocker-of-dpa-groups sw1
id (decode) --> buckets
0x32000001 (type L2 multicast vlan 2 index 1) --> groups [0x02000001,0x02000000]
0x02000001 (type L2 interface vlan 2 pport 1) --> pop vlan out pport 1
0x01000002 (type L2 interface vlan 1 pport 2) --> pop vlan out pport 2
0x02000000 (type L2 interface vlan 2 pport 0) --> pop vlan out pport 0
0x01000000 (type L2 interface vlan 1 pport 0) --> pop vlan out pport 0
0x31000000 (type L2 multicast vlan 1 index 0) --> groups [0x01000002,0x01000000]

[Added "query-" prefixes to rocker.json commands as suggested by Eric
Blake <eblake@redhat.com>.
--Stefan]

Signed-off-by: Scott Feldman <sfeldma@gmail.com>
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Message-id: 1433985681-56138-5-git-send-email-sfeldma@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-06-12 13:42:17 +01:00
Markus Armbruster
04e00c92ef monitor: Use trad. command interface for HMP pcie_aer_inject_error
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one.  Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.

pcie_aer_inject_error's implementation is split into the
hmp_pcie_aer_inject_error() and pcie_aer_inject_error_print().  The
former is a peculiar crossbreed between HMP and QMP handler.  On
success, it works like a QMP handler: store QDict through ret_data
parameter, return 0.  Printing the QDict is left to
pcie_aer_inject_error_print().  On failure, it works more like an HMP
handler: print error to monitor, return negative number.

To convert to the traditional interface, turn
pcie_aer_inject_error_print() into a command handler wrapping around
hmp_pcie_aer_inject_error().  By convention, this command handler
should be called hmp_pcie_aer_inject_error(), so rename the existing
hmp_pcie_aer_inject_error() to do_pcie_aer_inject_error().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Markus Armbruster
318660f84a monitor: Use traditional command interface for HMP device_add
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one.  Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.

For device_add, that's easy: just wrap the obvious hmp_device_add()
around do_device_add().

monitor_user_noop() is now unused, drop it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Markus Armbruster
072ebe6b03 monitor: Use traditional command interface for HMP drive_del
All QMP commands use the "new" handler interface (mhandler.cmd_new).
Most HMP commands still use the traditional interface (mhandler.cmd),
but a few use the "new" one.  Complicates handle_user_command() for no
gain, so I'm converting these to the traditional interface.

For drive_del, that's easy: hmp_drive_del() sheds its unused last
parameter, and its return value, which the caller ignored anyway.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Markus Armbruster
b8a185bc9a monitor: Convert client_migrate_info to QAPI
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Markus Armbruster
13cadefbda monitor: Improve and document client_migrate_info protocol error
Protocol must be spice, vnc isn't implemented.  Fix up documentation.

Attempts to use vnc or any other unknown protocol yield the misleading
error message "Invalid parameter 'protocol'".  Improve it to
"Parameter 'protocol' expects spice".

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by. Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-02 09:59:13 +02:00
Liang Li
50e9a629c6 migration: Add hmp interface to set and query parameters
Add the hmp interface to tune and query the parameters used in
live migration.

Signed-off-by: Liang Li <liang.z.li@intel.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-05-07 18:31:54 +02:00
Markus Armbruster
3b5704b2f8 monitor: Make client_migrate_info synchronous
Live migration with spice works like this today:

  (1) client_migrate_info monitor cmd
  (2) spice server notifies client, client connects to target host.
  (3) qemu waits until spice client connect is finished.
  (4) send over vmstate (i.e. main part of live migration).
  (5) spice handover to target host.

(3) is implemented by making client_migrate_info a async monitor
command.  This is the only async monitor command we have.

The original reason to implement this dance was that qemu did not accept
new tcp connections while the incoming migration was running, so (2) and
(4) could not be done in parallel.  That issue was fixed long ago though.
Qemu version 1.3.0 (released Dec 2012) and newer happily accept tcp
connects while the incoming migration runs.

Time to drop step (3).  This patch does exactly that, by making the
monitor command synchronous and removing the code needed to handle the
async monitor command in ui/spice-core.c

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-04-27 12:46:57 +02:00
Markus Armbruster
b76d799ea5 hmp: Fix texinfo documentation
Several issues:

* Commands i and o lack @item.  Their one-liner documentation gets
  squashed into the preceding command print.  Add the obvious @item.

* Commands i, o and cpu-add lack @findex.  The function index doesn't
  have them.  Add the obvious @findex.

* Commit 727f005 put block_set_io_throttle was added in the middle of
  block_passwd.  Move it.

* Correct spelling of commands chardev-add and chardev-remove in @item
  and @findex.

* Some commands have a blank line between @item/@findex and the text,
  most don't.  Normalize to no blank line.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19 11:35:52 +03:00
Markus Armbruster
46db7b862a hmp: Fix definition of command quit
The command handler is a union of two function types.  If
cmd->user_print is set, handle_user_command() calls
cmd->mhandler.cmd_new(), else cmd->mhandler.cmd().

Command definitions must therefore either set both user_print() and
mhandler.cmd_new(), or only mhandler.cmd().

quit's sets user_print and mhandler.cmd().  handle_user_command()
calls hmp_quit() through mhandler.cmd_new() rather than
mhandler.cmd(), i.e. through a function pointer with a different type.
Broken in commit 7a7f325, v1.0.

Works in practice because hmp_quit() doesn't use its arguments, and
handle_user_command() ignores its function value.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-19 11:11:55 +03:00
Andreas Färber
a01ff75fcd qom: Implement info qom-tree HMP command
To complement qdev's bus-oriented info qtree, info qom-tree
prints a hierarchical view of the QOM composition tree.

By default, the machine composition tree is shown. This can be overriden
by supplying a path argument, such as "info qom-tree /".

Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17 14:31:21 +01:00
Andreas Färber
c0e6ee9e6f qom: Implement qom-set HMP command
Re-implemented based on qmp_qom_set() to facilitate argument parsing.

Warn about ambiguous path arguments.

Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17 14:31:15 +01:00
Andreas Färber
89d7fa9eb4 qom: Implement qom-list HMP command
Implement it as a wrapper for QMP qom-list, but mimic the behavior of
scripts/qmp/qom-list in making the path argument optional and listing
the root if absent, to hint users what kind of path to pass.

Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-17 14:31:10 +01:00
Dr. David Alan Gilbert
bf1ae1f4dc Add migrate_incoming
Add migrate_incoming/migrate-incoming to start an incoming
migration.

Once a qemu has been started with
    -incoming defer

the migration can be started by issuing:
    migrate_incoming uri

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-03-16 14:31:07 +01:00
Markus Armbruster
f51074cdc6 pci-hotplug-old: Has been dead for five major releases, bury
Commit 79ca616 (v1.6.0) accidentally disabled legacy x86-only HMP
commands pci_add, pci_del: it defined CONFIG_PCI_HOTPLUG only as make
variable, not as preprocessor macro, killing the code conditional on
defined(CONFIG_PCI_HOTPLUG_OLD).

In all this time, nobody reported the loss.  I only noticed it when I
tried to test some error reporting change that forced me to touch this
old crap again.

Fun: git-log hw/pci/pci-hotplug-old.c shows our faith in the backward
compatibility god has been strong enough to sacrifice at its altar
about a dozen times, but not strong enough to even once verify the
legacy feature's still there, let alone works.

Remove the commands along with the code backing them.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-03-01 12:37:54 +01:00
Markus Armbruster
3e5a50d64c hmp: Name HMP command handler functions hmp_COMMAND()
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(),
and sometimes COMMAND pointlessly differs in spelling.

Normalize to hmp_COMMAND(), where COMMAND is exactly the command name
with '-' replaced by '_'.

Exceptions:

* do_device_add() and client_migrate_info() *not* renamed to
  hmp_device_add(), hmp_client_migrate_info(), because they're also
  QMP handlers.  They still need to be converted to QAPI.

* do_memory_dump(), do_physical_memory_dump(), do_ioport_read(),
  do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(),
  hmp_i(), hmp_o(), because those names are too cryptic for my taste.

* do_info_help() renamed to hmp_info_help() instead of hmp_info(),
  because it only covers help.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18 11:58:30 +01:00
Markus Armbruster
7797a73947 hmp: Remove "info pcmcia"
This command lists PCMCIA sockets and cards.  Only a few ARM boards
have sockets (akita, borzoi, connex, mainstone, spitz, terrier, tosa,
verdex, z2), the only card is the DSCM-1xxxx Hitachi Microdrive (qdev
"microdrive"), and it is only inserted during machine init, if ever.
So this command doesn't really tell anybody anything new so far.

Moreover, pcmcia_socket_unregister() has a use-after-free bug, flagged
by Coverity.  Has never been used, because there has never been code
to eject a PCMCIA card.

Not worth fixing & converting to QMP.  Remove it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Acked-by: Andreas Färber <afaerber@suse.de>
Message-id: 1411144812-22958-1-git-send-email-armbru@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-24 12:19:11 +01:00
Zhu Guihua
a631892f9d Add HMP command "info memory-devices"
Provides HMP equivalent of QMP query-memory-devices command.

Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com>
Reviewed-By: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-09-26 13:37:06 -04:00
Alexey Kardashevskiy
9cb805fd26 cpus: Define callback for QEMU "nmi" command
This introduces an NMI (Non Maskable Interrupt) interface with
a single nmi_monitor_handler() method. A machine or a device can
implement it. This searches for an QOM object with this interface
and if it is implemented, calls it. The callback implements an action
required to cause debug crash dump on in-kernel debugger invocation.
The callback returns Error**.

This adds a nmi_monitor_handle() helper which walks through
all objects to find the interface. The interface method is called
for all found instances.

This adds support for it in qmp_inject_nmi(). Since no architecture
supports it at the moment, there is no change in behaviour.

This changes inject-nmi command description for HMP and QMP.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-08-25 13:25:16 +02:00
Nikolay Nikolaev
03ce574442 Add the vhost-user netdev backend to the command line
The supplied chardev id will be inspected for supported options. Only
a socket backend, with a set path (i.e. a Unix socket) and optionally
the server parameter set, will be allowed. Other options (nowait, telnet)
will make the chardev unusable and the netdev will not be initialised.

Additional checks for validity:
  - requires `-numa node,memdev=..`
  - requires `-device virtio-net-*`

The `vhostforce` option is used to force vhost-net when we deal with
non-MSIX guests.

Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2014-06-19 18:44:18 +03:00
Hani Benhabiles
b21631f3b5 monitor: Add delvm and loadvm argument completion
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles
ddd6b45ce2 monitor: Add host_net_remove arguments completion
Relies on readline unique completion strings patch to make the added vlan/hub
completion values unique, instead of using something like a hash table.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles
e3bb532cc7 monitor: Add host_net_add device argument completion
Also fix the parameters documentation.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles
c68a0409b3 monitor: Add migrate_set_capability completion
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:29 -04:00
Hani Benhabiles
d0ece345cb monitor: Add watchdog_action argument completion
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:28 -04:00
Hani Benhabiles
8e5977797d monitor: Add ringbuf_write and ringbuf_read argument completion
Export chr_is_ringbuf() function. Also remove left-over function prototypes
while at it.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-11 10:10:28 -04:00
Hani Benhabiles
11b389f21e monitor: Add netdev_del id argument completion.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15 15:16:02 -04:00
Hani Benhabiles
b162b49adc monitor: Add netdev_add type argument completion.
Also update the command's documentation.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15 15:16:02 -04:00
Hani Benhabiles
40d19394b7 monitor: Add set_link arguments completion.
Make it possible to query all net clients without specifying an ID when calling
qemu_find_net_clients_except().

This also adds the add_completion_option() function which is to be used for
other commands completions as well.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15 15:16:02 -04:00
Hani Benhabiles
13e315dada monitor: Add chardev-add backend argument completion.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15 15:16:01 -04:00
Hani Benhabiles
6297d9a279 monitor: Add chardev-remove command completion.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15 15:16:01 -04:00
Hani Benhabiles
29136cd8a4 monitor: Convert sendkey to use command_completion.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-05-15 15:16:01 -04:00
Qiao Nuohan
1b7a0f758b HMP: support specifying dump format for dump-guest-memory
Dumping guest memory is available to specify the dump format now. This patch
adds options '-z|-l|-s' to HMP command dump-guest-memory to specify dumping in
kdump-compression format, with zlib/lzo/snappy compression. And without these
options ELF format will be used.

The discussion about this feature is here:

http://lists.nongnu.org/archive/html/qemu-devel/2014-03/msg04235.html

Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Suggested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> (on s390x/kvm)
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 11:18:33 -04:00
Qiao Nuohan
c20499d985 HMP: fix doc of dump-guest-memory
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 11:17:38 -04:00
Hani Benhabiles
2da1b3abbc monitor: Add device_add and device_del completion.
Also fix device_add completion including non-hotpluggable devices.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:37:12 -04:00
Hani Benhabiles
bfa40f77af monitor: Add command_completion callback to mon_cmd_t.
Convert object_add and object_del commands to use the new callback.

Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:27:49 -04:00
Hani Benhabiles
f7bdc41acc monitor: Fix drive_del id argument type completion.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-04-25 09:19:59 -04:00
Jeff Cody
3722290074 block: update block commit documentation regarding image truncation
This updates the documentation for commiting snapshot images.
Specifically, this highlights what happens when the base image
is either smaller or larger than the snapshot image being committed.

In the case of the base image being smaller, it is resized to the
larger size of the snapshot image.  In the case of the base image
being larger, it is not resized automatically, but once the commit
has completed it is safe for the user to truncate the base image.

Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 16:12:49 +01:00
Paolo Bonzini
cff8b2c6fc monitor: add object-add (QMP) and object_add (HMP) command
Add two commands that are the monitor counterparts of -object.  The commands
have the same Visitor-based implementation, but use different kinds of
visitors so that the HMP command has a DWIM string-based syntax, while
the QMP variant accepts a stricter JSON-based properties dictionary.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 13:45:47 -05:00
Paolo Bonzini
ab2d0531b2 monitor: add object-del (QMP) and object_del (HMP) command
These two commands invoke the "unparent" method of Object.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 13:45:47 -05:00
Jason J. Herne
abf233294b qemu-monitor: HMP cpu-add wrapper
Add HMP cpu-add wrapper to allow cpu hot plugging via monitor.

Signed-off-by: Jason J. Herne <jjherne@us.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-06 13:45:39 -05:00
Vincenzo Maffione
58952137b0 net: Adding netmap network backend
This patch adds support for a network backend based on netmap.
netmap is a framework for high speed packet I/O. You can use it
to build extremely fast traffic generators, monitors, software
switches or network middleboxes. Its companion software switch
VALE lets you interconnect virtual machines.
netmap and VALE are implemented as a non-intrusive kernel module,
support NICs from multiple vendors, are part of standard FreeBSD
distributions and available in source format for Linux too.

To compile QEMU with netmap support, use the following configure
options:
    ./configure [...] --enable-netmap --extra-cflags=-I/path/to/netmap/sys
where "/path/to/netmap" contains the netmap source code, available at
    http://info.iet.unipi.it/~luigi/netmap/

The same webpage contains more information about the netmap project
(together with papers and presentations).

Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-12-09 13:33:19 +01:00
Wenchao Xia
7a4ed2ee42 hmp: add interface hmp_snapshot_delete_blkdev_internal
It is hard to make both id and name optional in hmp console as qmp
interface, so this interface require user to specify name.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Wenchao Xia
775ca88e82 hmp: add interface hmp_snapshot_blkdev_internal
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-09-12 10:12:47 +02:00
Anthony Liguori
4ff78e0dbc Merge remote-tracking branch 'luiz/queue/qmp' into staging
# By Wenchao Xia (15) and Stefan Weil (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
  monitor: improve auto complete of "help" for single command in sub group
  monitor: allow "help" show message for single command in sub group
  monitor: support sub command in auto completion
  monitor: refine monitor_find_completion()
  monitor: support sub command in help
  monitor: refine parse_cmdline()
  monitor: code move for parse_cmdline()
  monitor: avoid direct use of global variable *mon_cmds
  monitor: split off monitor_data_init()
  monitor: call sortcmdlist() only one time
  monitor: avoid use of global *cur_mon in readline_completion()
  monitor: avoid use of global *cur_mon in monitor_find_completion()
  monitor: avoid use of global *cur_mon in block_completion_it()
  monitor: avoid use of global *cur_mon in file_completion()
  monitor: avoid use of global *cur_mon in cmd_completion()
  monitor: Add missing attributes to local function

Message-id: 1377865357-6742-1-git-send-email-lcapitulino@redhat.com
2013-08-30 12:26:04 -05:00
Eugene (jno) Dvurechenski
7f7f975295 s390: wire up nmi command to raise a RESTART interrupt on S390
There is the 'nmi' command that is used to trigger a guest dump via kdump feature on x86.
s390 uses RESTART interrupt to trigger kdump.
So, this patch provides a mean to use 'nmi' command on s390 to raise RESTART interrupt.

The CPU to receive the RESTART interrupt is the "default" one.

There is an infrastructure to select the "default" CPU using 'cpu' command.
The 'info cpus' command can be used to see which one is the "default".

In order to wire up the RESTART to 'nmi' command we had to:
1. implement the kvm_s390_cpu_restart function by exporting the existing code
2. implement s390_cpu_restart function as kvm-aware wrapper
3. modify the qmp_inject_nmi function to enable (for s390) the scan for
   "default" CPU and call s390_cpu_restart for it;
3. fix some messages.

Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Alexander Graf <agraf@suse.de>
2013-08-30 14:16:48 +02:00
Wenchao Xia
129be006d6 monitor: allow "help" show message for single command in sub group
A new parameter type 'S' is introduced to allow user input any string.
"help info block" works normal now.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-08-30 07:41:15 -04:00
Stefan Hajnoczi
de90930a0c block: add drive_backup HMP command
Make "drive_backup" available on the HMP monitor:

  drive_backup [-n] [-f] device target [format]

The -n flag requests QEMU to reuse the image found in new-image-file,
instead of recreating it from scratch.

The -f flag requests QEMU to copy the whole disk, so that the result
does not need a backing file.  Note that this flag *must* currently be
passed since the other sync modes ('none' and 'top') have not been
implemented yet.  Requiring it ensures that "drive_backup" behaves like
"drive_mirror".

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-07-15 09:49:00 +02:00
David Gibson
79ca616f29 pci: Cleanup configuration for pci-hotplug.c
pci-hotplug.c and the CONFIG_PCI_HOTPLUG variable which controls its
compilation are misnamed.  They're not about PCI hotplug in general, but
rather about the pci_add/pci_del interface which are now deprecated in
favour of the more general device_add/device_del interface.  This patch
therefore renames them to pci-hotplug-old.c and CONFIG_PCI_HOTPLUG_OLD.

CONFIG_PCI_HOTPLUG=y was listed twice in {i386,x86_64}-softmmu.make for no
particular reason, so we clean that up too.  In addition it was included in
ppc64-softmmu.mak for which the old hotplug interface was never used and is
unsuitable, so we remove that too.

Most of pci-hotplug.c was additionaly protected by #ifdef TARGET_I386.  The
small piece which wasn't is only called from the pci_add and pci_del hooks
in hmp-commands.hx, which themselves were protected by #ifdef TARGET_I386.
This patch therefore also removes the #ifdef from pci-hotplug-old.c,
and changes the ifdefs in hmp-commands.hx to use CONFIG_PCI_HOTPLUG_OLD.

Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-07-04 10:45:31 +03:00
Andreas Färber
2a78636bd2 dump: Drop qmp_dump_guest_memory() stub and build for all targets
qmp_dump_guest_memory() calls dump_init() and returns an Error when
cpu_get_dump_info() returns an error, as done by the stub.
So there is no need to have a stub for qmp_dump_guest_memory().

Enable the documentation of the always-present dump-guest-memory command.

That way we can drop CONFIG_HAVE_CORE_DUMP and leave configure
completely out of the picture for target CPU features.

Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-11 18:16:36 +02:00
Kevin Wolf
587da2c39c Make qemu-io commands available in HMP
It was decided to not make this command available in QMP in order to
make clear that this is not supposed to be a stable API and should be
used only for testing and debugging purposes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-06-06 11:27:05 +02:00
Stefan Hajnoczi
293c51a6ee blockdev: reset werror/rerror on drive_del
Paolo Bonzini <pbonzini@redhat.com> suggested the following test case:

1. Launch a guest and wait at the GRUB boot menu:

  qemu-system-x86_64 -enable-kvm -m 1024 \
   -drive if=none,cache=none,file=test.img,id=foo,werror=stop,rerror=stop
   -device virtio-blk-pci,drive=foo,id=virtio0,addr=4

2. Hot unplug the device:

  (qemu) drive_del foo

3. Select the first boot menu entry

Without this patch the guest pauses due to ENOMEDIUM.  The guest is
stuck in a continuous pause loop since the I/O request is retried and
fails immediately again when the guest is resumed.

With this patch the error is reported to the guest.

Note that this scenario actually happens sometimes during libvirt disk
hot unplug, where device_del is followed by drive_del.  I/O may still be
submitted to the drive after drive_del if the guest does not process the
PCI hot unplug notification.

Reported-by: Dafna Ron <dron@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2013-06-05 16:39:59 +02:00
Paolo Bonzini
ffa48cf5ab audio: remove HAS_AUDIO
Several targets can have wavcapture/-soundhw support via PCI cards.
HAS_AUDIO is a useless limitation, remove it.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366303444-24620-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-29 12:16:36 -05:00
Michal Novotny
315f9e1a8f Revert "New QMP command query-cpu-max and HMP command cpu_max"
This reverts commit 4d700430a2 as asked by
Luiz. The patch has been obsoleted by extending MachineInfo structure
by cpu-max field.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-04-12 09:41:54 -04:00
Michal Novotny
4d700430a2 New QMP command query-cpu-max and HMP command cpu_max
These commands return the maximum number of CPUs supported by the
currently running emulator instance, as defined in its QEMUMachine
struct.

Signed-off-by: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-03-25 16:21:33 -04:00
Gerd Hoffmann
4692082540 Revert "hmp: Disable chardev-add and chardev-remove"
This reverts commit 8a14952c9d.
2013-03-13 10:27:47 +01:00
Stefan Berger
d1a0cf738d Support for TPM command line options
This patch adds support for TPM command line options.
The command line options supported here are

./qemu-... -tpmdev passthrough,path=<path to TPM device>,id=<id>
           -device tpm-tis,tpmdev=<id>,id=<other id>

and

./qemu-... -tpmdev help

where the latter works similar to -soundhw help and shows a list of
available TPM backends (for example 'passthrough').

Using the type parameter, the backend is chosen, i.e., 'passthrough' for the
passthrough driver. The interpretation of the other parameters along
with determining whether enough parameters were provided is pushed into
the backend driver, which needs to implement the interface function
'create' and return a TPMDriverOpts structure if the VM can be started or
'NULL' if not enough or bad parameters were provided.

Monitor support for 'info tpm' has been added. It for example prints the
following:

(qemu) info tpm
TPM devices:
 tpm0: model=tpm-tis
  \ tpm0: type=passthrough,path=/dev/tpm0,cancel-path=/sys/devices/pnp0/00:09/cancel

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
Message-id: 1361987275-26289-2-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-03-12 13:40:11 -05:00
Stefan Hajnoczi
40e8c26d7b doc: document -netdev hubport
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-02-27 16:10:47 +01:00
Peter Maydell
989b697ddd qemu-log: default to stderr for logging output
Switch the default for qemu_log logging output from "/tmp/qemu.log"
to stderr. This is an incompatible change in some sense, but logging
is mostly used for debugging purposes so it shouldn't affect production
use. The previous behaviour can be obtained by adding "-D /tmp/qemu.log"
to the command line.

This change requires us to:
 * update all the documentation/help text (we take the opportunity
   to smooth out minor inconsistencies between the phrasing in
   linux-user/bsd-user/system help messages)
 * make linux-user and bsd-user defer to qemu-log for the default
   logging destination rather than overriding it themselves
 * ensure that all logfile closing is done via qemu_log_close()
   and that that function doesn't close stderr
as well as the obvious change to the behaviour of do_qemu_set_log()
when no logfile name has been specified.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1361901160-28729-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-26 13:31:47 -06:00
Markus Armbruster
8a14952c9d hmp: Disable chardev-add and chardev-remove
As a general rule, HMP commands must be built on top of the QMP API.
Luiz and others have worked long & hard to make HMP conform to this
rule.

Commit f1088908 added chardev-add, in violation of this rule.  QMP
command chardev-add was added right before, with minimal features, and
the idea to complete it step by step, then switch over the HMP command
to use it.

Unfortunately, we're not there, yet, and we don't want to release with
chardev-add in a "HMP is more powerful than QMP" state.

Disable the HMP command for now, along with its chardev-remove buddy.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06 16:35:43 -06:00
Markus Armbruster
543f34126b hmp: make memchar-read escape ASCII control chars except \n and \t
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06 16:35:20 -06:00
Markus Armbruster
3949e59414 qemu-char: Saner naming of memchar stuff & doc fixes
New device, has never been released, so we can still improve things
without worrying about compatibility.

Naming is a mess.  The code calls the device driver CirMemCharDriver,
the public API calls it "memory", "memchardev", or "memchar", and the
special commands are named like "memchar-FOO".  "memory" is a
particularly unfortunate choice, because there's another character
device driver called MemoryDriver.  Moreover, the device's distinctive
property is that it's a ring buffer, not that's in memory.  Therefore:

* Rename CirMemCharDriver to RingBufCharDriver, and call the thing a
  "ringbuf" in the API.

* Rename QMP and HMP commands from memchar-FOO to ringbuf-FOO.

* Rename device parameter from maxcapacity to size (simple words are
  good for you).

* Clearly mark the parameter as optional in documentation.

* Fix error reporting so that chardev-add reports to current monitor,
  not stderr.

* Replace cirmem in C identifiers by ringbuf.

* Rework documentation.  Document the impact of our crappy UTF-8
  handling on reading.

* QMP examples that even work.

I could split this up into multiple commits, but they'd change the
same documentation lines multiple times.  Not worth it.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-06 16:35:19 -06:00
Lei Li
49b6d7220b QAPI: Introduce memchar-read QMP command
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-25 11:46:50 -02:00
Lei Li
1f590cf945 QAPI: Introduce memchar-write QMP command
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-25 11:23:06 -02:00
Wenchao Xia
84c44613f9 HMP: add sub command table to info
Now info command takes a table of sub info commands,
and changed do_info() to do_info_help() to do help funtion
only.
 Note that now "info <unknown-topic>" returns error instead
of list of info topics.

Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-01-17 10:24:52 -02:00
Gerd Hoffmann
f108890891 chardev: add hmp hotplug commands
Add chardev-add and chardev-remove commands to the human monitor.
chardev-add accepts the same syntax as -chardev, chardev-remove
expects a chardev id.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-16 06:58:54 +01:00
Liming Wang
e94c4c9287 trace: Remove "info trace" from documents
commit 88affa1c monitor: remove unused do_info_trace

has removed "info trace" function from monitor, so remove it from documents.

Signed-off-by: Liming Wang <walimisdev@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-11-16 13:35:48 +01:00
Paolo Bonzini
4057725f35 hmp: add NBD server commands
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-12 14:38:29 +01:00
Paolo Bonzini
d9b902db3f qmp: add drive-mirror command
This adds the monitor commands that start the mirroring job.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:20 +02:00
Paolo Bonzini
aeae883baf block: add block-job-complete
While streaming can be dropped as soon as it progressed through the whole
image, mirroring needs to be completed manually for two reasons: 1) so that
management knows exactly when the VM switches to the target; 2) because
for other use cases such as replication, we may leave the operation running
for the whole life of the virtual machine.

Add a new block job command that manually completes background operations.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-10-24 10:26:19 +02:00
Anthony Liguori
05d4f2f2ca Merge remote-tracking branch 'kwolf/for-anthony' into staging
* kwolf/for-anthony: (30 commits)
  qemu-iotests: add tests for streaming error handling
  qemu-iotests: map underscore to dash in QMP argument names
  blkdebug: process all set_state rules in the old state
  stream: add on-error argument
  block: introduce block job error
  iostatus: reorganize io error code
  iostatus: change is_read to a bool
  iostatus: move BlockdevOnError declaration to QAPI
  iostatus: rename BlockErrorAction, BlockQMPEventAction
  qemu-iotests: add test for pausing a streaming operation
  qmp: add block-job-pause and block-job-resume
  block: add support for job pause/resume
  qmp: add 'busy' member to BlockJobInfo
  block: add block_job_query
  block: move job APIs to separate files
  block: fix documentation of block_job_cancel_sync
  qerror/block: introduce QERR_BLOCK_JOB_NOT_ACTIVE
  qemu-iotests: add initial tests for live block commit
  QAPI: add command for live block commit, 'block-commit'
  block: helper function, to find the base image of a chain
  ...
2012-10-04 19:53:50 -05:00
Paolo Bonzini
6e37fb811a qmp: add block-job-pause and block-job-resume
Add QMP commands matching the functionality.

Paused jobs cannot be canceled without first resuming them.  This
ensures that I/O errors are never missed by management.  However, an
optional force argument can be specified to allow that.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-09-28 19:14:32 +02:00
Luiz Capitulino
753637695b hmp: dump-guest-memory: hardcode protocol argument to "file:"
Today, it's necessary to specify the protocol you want to use
when dumping the guest memory, for example:

 (qemu) dump-guest-memory file:/tmp/guest-memory

This has a few issues:

 1. It's cumbersome to type
 2. We loose file path autocompletion
 3. Being able to specify fd:X in HMP makes little sense for humans

Because of these reasons, hardcode the 'protocol' argument to
'file:' in HMP.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
2012-09-27 09:46:17 -03:00
Luiz Capitulino
ad39cf6d15 qapi: convert screendump
Next commits will update devices to propagate errors.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05 15:48:57 -03:00
Amos Kong
e4c8f004c5 qapi: convert sendkey
Convert 'sendkey' to use QAPI.

QAPI passes key's index of mapping table to qmp_send_key(),
not keycode. So we use help functions to convert key/code to
index of key_defs, and 'index' will be converted to 'keycode'
inside qmp_send_key().

For qmp, QAPI would check invalid key and raise error.
For hmp, invalid key is checked in hmp_send_key().

'send-key' of QMP doesn't support key in hexadecimal format.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05 15:48:57 -03:00
Amos Kong
2ef20c15b4 hmp: rename arguments
Rename 'string' to 'keys', rename 'hold_time' to 'hold-time'.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05 15:48:56 -03:00
Amos Kong
886cc706ce fix doc of using raw values with sendkey
(qemu) sendkey a
(qemu) sendkey 0x1e
(qemu) sendkey #0x1e
 unknown key: '#0x1e'

The last command doesn't work, '#' is not requested before
raw values, and the raw value in decimal format is not supported.

Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-09-05 15:48:56 -03:00
Orit Wasserman
9e1ba4cc4e Add migrate_set_cache_size command
Change XBZRLE cache size in bytes (the size should be a power of 2, it will be
rounded down to the nearest power of 2).
If XBZRLE cache size is too small there will be many cache miss.

New query-migrate-cache-size QMP command and 'info migrate_cache_size' HMP
command to query cache value.

Signed-off-by: Benoit Hudzia <benoit.hudzia@sap.com>
Signed-off-by: Petter Svard <petters@cs.umu.se>
Signed-off-by: Aidan Shribman <aidan.shribman@sap.com>
Signed-off-by: Orit Wasserman <owasserm@redhat.com>

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08 13:51:12 +02:00
Orit Wasserman
0045843324 Add migrate-set-capabilities
The management can enable/disable a capability for the next migration by using
migrate-set-capabilities QMP command.
The user can use migrate_set_capability HMP command.

Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08 13:51:11 +02:00
Orit Wasserman
bbf6da32b5 Add migration capabilities
The management can query the current migration capabilities using
query-migrate-capabilities QMP command.
The user can use 'info migrate_capabilities' HMP command.
Currently only XBZRLE capability is available.

Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>

Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2012-08-08 13:51:11 +02:00
Paolo Bonzini
05290d80c8 qapi: generalize documentation of streaming commands
Talk about background operations in general, rather than specifically
about streaming.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-08-06 22:39:14 +02:00
Corey Bryant
208c9d1b7c qapi: Convert getfd and closefd
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-07-13 13:46:55 -03:00
Luiz Capitulino
5f96415527 qapi: convert netdev_del
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04 13:49:35 -03:00
Luiz Capitulino
928059a37b qapi: convert netdev_add
This is not a full QAPI conversion, but an intermediate step.

In essence, do_netdev_add() is split into three functions:

 1. netdev_add(): performs the actual work. This function is fully
    converted to Error (thus, it's "qapi-friendly")

 2. qmp_netdev_add(): the QMP front-end for netdev_add(). This is
    coded by hand and not auto-generated (gen=no in the schema). The
    reason for this it's a lot easier and simpler to with QemuOpts
    this way

 3. hmp_netdev_add(): HMP front-end.

This design was suggested by Paolo Bonzini.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-By: Laszlo Ersek <lersek@redhat.com>
2012-06-04 13:49:35 -03:00
Wen Congyang
783e9b4826 introduce a new monitor command 'dump-guest-memory' to dump guest's memory
The command's usage:
   dump-guest-memory [-p] protocol [begin] [length]
The supported protocol can be file or fd:
1. file: the protocol starts with "file:", and the following string is
   the file's path.
2. fd: the protocol starts with "fd:", and the following string is the
   fd's name.

Note:
  1. If you want to use gdb to process the core, please specify -p option.
     The reason why the -p option is not default is:
       a. guest machine in a catastrophic state can have corrupted memory,
          which we cannot trust.
       b. The guest machine can be in read-mode even if paging is enabled.
          For example: the guest machine uses ACPI to sleep, and ACPI sleep
          state goes in real-mode.
  2. If you don't want to dump all guest's memory, please specify the start
     physical address and the length.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-06-04 13:49:34 -03:00
Stefan Hajnoczi
c83c66c3b5 block: add 'speed' optional parameter to block-stream
Allow streaming operations to be started with an initial speed limit.
This eliminates the window of time between starting streaming and
issuing block-job-set-speed.  Users should use the new optional 'speed'
parameter instead so that speed limits are in effect immediately when
the job starts.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-27 11:44:50 -03:00
Stefan Hajnoczi
882ec7ce53 block: change block-job-set-speed argument from 'value' to 'speed'
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-04-27 11:44:50 -03:00
Paolo Bonzini
4451b79962 fix block_job_set_speed name in documentation
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-20 13:14:53 +01:00
Luiz Capitulino
a15fef21c7 qapi: convert device_del
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-09 14:35:25 -03:00
Luiz Capitulino
e1c37d0e94 qapi: Convert migrate
The migrate command is one of those commands where HMP and QMP completely
mix up together. This made the conversion to the QAPI (which separates the
command into QMP and HMP parts) a bit difficult.

The first important change to be noticed is that this commit completes the
removal of the Monitor object from migration code, started by the previous
commit.

Another important and tricky change is about supporting the non-detached
mode. That is, if the user doesn't pass '-d' the migrate command will lock
the monitor and will only release it when migration is finished.

To support this in the new HMP command (hmp_migrate()), it is necessary
to create a timer which runs every second and checks if the migration is
still active. If it is, the timer callback will re-schedule itself to run
one second in the future. If the migration has already finished, the
monitor lock is released and the user can use it normally.

All these changes should be transparent to the user.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-03-15 10:39:52 -03:00
Paolo Bonzini
6cc2a4157b qmp: convert blockdev-snapshot-sync to a wrapper around transactions
Simplify the blockdev-snapshot-sync code and gain failsafe operation
by turning it into a wrapper around the new transaction command.  A new
option is also added matching "mode".

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-03-12 15:14:07 +01:00
Blue Swirl
b3e54c689c Merge branch 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensa
* 'xtensa' of git://jcmvbkbc.spb.ru/dumb/qemu-xtensa:
  target-xtensa: add breakpoint tests
  target-xtensa: add DEBUG_SECTION to overlay tool
  target-xtensa: add DBREAK data breakpoints
  exec: let cpu_watchpoint_insert accept larger watchpoints
  exec: fix check_watchpoint exiting cpu_loop
  exec: add missing breaks to the watch_mem_write
  target-xtensa: add ICOUNT SR and debug exception
  target-xtensa: implement instruction breakpoints
  target-xtensa: add DEBUGCAUSE SR and configuration
  target-xtensa: fetch 3rd opcode byte only when needed
  target-xtensa: implement info tlb monitor command
  target-xtensa: define TLB_TEMPLATE for MMU-less cores
2012-03-03 17:53:41 +00:00
Gerd Hoffmann
9b9df25a47 suspend: add system_wakeup monitor command
This patch adds the system_wakeup monitor command which will simply
wake up suspended guests.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-24 13:36:03 -06:00
Max Filippov
692f737cc2 target-xtensa: implement info tlb monitor command
Command dumps valid ITLB and DTLB entries.

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2012-02-18 01:25:28 +04:00
Stefan Hajnoczi
370521a1d6 qmp: add block_job_cancel command
Add block_job_cancel, which stops an active block streaming operation.
When the operation has been cancelled the new BLOCK_JOB_CANCELLED event
is emitted.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:18 +01:00
Stefan Hajnoczi
2d47c6e9aa qmp: add block_job_set_speed command
Add block_job_set_speed, which sets the maximum speed for a background
block operation.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:17 +01:00
Stefan Hajnoczi
12bd451fe0 qmp: add block_stream command
Add the block_stream command, which starts copy backing file contents
into the image file.  Also add the BLOCK_JOB_COMPLETED QMP event which
is emitted when image streaming completes.  Later patches add control
over the background copy speed, cancelation, and querying running
streaming operations.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-01-26 14:49:14 +01:00
Luiz Capitulino
80047da59b qapi: Convert block_set_io_throttle
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:39 -02:00
Luiz Capitulino
333a96ec9f qapi: Convert change
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:39 -02:00
Luiz Capitulino
c245b6a37d qapi: Convert eject
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:39 -02:00
Luiz Capitulino
9ad5372daa qapi: Convert expire_password
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:38 -02:00
Luiz Capitulino
fbf796fd6f qapi: Convert set_password
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2012-01-18 10:23:38 -02:00
Alexander Graf
971ca4d906 Expose drive_add on all architectures
All architectures can now use drive_add on the monitor. This of course
does not mean that there is hotplug support for the specific platform,
so in order to actually make use of the new drives you still need to
have a hotplug capable device.

Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-04 02:48:14 +01:00
Anthony Liguori
9423a2e8dd Merge remote-tracking branch 'stefanha/trivial-patches-next' into staging 2011-12-14 07:59:21 -06:00
Luiz Capitulino
3dc853832d qapi: Convert migrate_set_speed
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
4f0a993bf3 qapi: Convert migrate_set_downtime
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
6cdedb075f qapi: Convert migrate_cancel
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
6106e2492f qapi: Convert blockdev_snapshot_sync
Unfortunately, this conversion required an additional change.

In the old QMP command, the 'snapshot-file' argument is specified as
optional. The idea is to take the snapshot internally if 'snapshot-file'
is not passed. However, internal snapshots are not supported yet so
the command returns a MissingParamater error if 'snapshot-file' is not
passed. Which makes the argument actually required and will cause
compatibility breakage if we change that in the future.

To fix this the QAPI converted blockdev_snapshot_sync command makes the
'snapshot-file' argument required. Again, in practice it's actually required,
so this is not incompatible.

If we do implement internal snapshots someday, we'll need a new argument
for it.

Note that this discussion doesn't affect HMP.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
5e7caacb25 qapi: Convert block_resize
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
d72f326431 qapi: Convert balloon
Note that the command being dropped uses the deprecated MONITOR_CMD_ASYNC
API, but the new command is a regular synchronous command. There shouldn't
be visible differences though, as MONITOR_CMD_ASYNC is internal only.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
a4dea8a9f4 qapi: Convert block_passwd
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
4b37156c40 qapi: Convert set_link
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
ab49ab5c48 qapi: Convert inject-nmi
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
e42e818bf4 qapi: Convert cont
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
6d3962bf84 qapi: Convert pmemsave
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:01 -02:00
Luiz Capitulino
0cfd6a9ab4 qapi: Convert memsave
Please, note that the QMP command has a new 'cpu-index' parameter.

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06 11:40:00 -02:00
Zhi Yong Wu
1f3392b7b3 pcie_aer: adjust do_pcie_aer_inejct_error -> do_pcie_aer_inject_error
This function name is a bit wrong. Although it doesn't impact function, it is a bit necessary that we should fixup it.

Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06 09:56:41 +00:00
Stefan Hajnoczi
fb0490f69f block: add -drive copy-on-read=on|off
This patch adds the -drive copy-on-read=on|off command-line option:

  copy-on-read=on|off
  copy-on-read is "on" or "off" and enables whether to copy read backing
  file sectors into the image file.  Copy-on-read avoids accessing the
  same backing file sectors repeatedly and is useful when the backing
  file is over a slow network.  By default copy-on-read is off.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:38 +01:00
Zhi Yong Wu
727f005e6a hmp/qmp: add block_set_io_throttle
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-12-05 14:51:35 +01:00
Anthony Liguori
96b3d73f5a Merge remote-tracking branch 'qmp/queue/qmp' into staging
Conflicts:
	ui/spice-core.c
2011-10-31 11:02:29 -05:00
Luiz Capitulino
755f196898 qapi: Convert the cpu command
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27 11:48:46 -02:00
Yonit Halperin
edc5cb1a52 spice: turn client_migrate_info to async
RHBZ 737921
Spice client is required to connect to the migration target before/as migration
starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client
we trigger the connection to the target upon client_migrate_info command.
client_migrate_info completion cb will be called after spice client has been
connected to the target (or a timeout). See following patches and spice patches.

Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-25 14:00:53 +02:00
Anthony Liguori
ebffe2afce Merge remote-tracking branch 'qmp/queue/qmp' into staging 2011-10-10 08:21:46 -05:00
Blue Swirl
211685040f Merge branch 'tracing' of git://repo.or.cz/qemu/stefanha
* 'tracing' of git://repo.or.cz/qemu/stefanha:
  trace: add arguments to bdrv_co_io_em() trace event
  trace: trace monitor qmp dispatch/completion
  trace: trace bdrv_open_common()
  hmp: re-enable trace-file command
2011-10-08 15:38:14 +00:00
Scott Wood
bebabbc7aa ppc: booke206: add "info tlb" support
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-10-06 09:48:04 +02:00
Luiz Capitulino
5bc465e4b1 qapi: Convert system_powerdown
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04 11:02:57 -03:00
Luiz Capitulino
38d226535a qapi: Convert system_reset
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04 11:02:57 -03:00
Luiz Capitulino
5f158f21f9 qapi: Convert stop
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04 11:02:57 -03:00
Luiz Capitulino
7a7f325e05 qapi: Convert quit
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04 11:02:57 -03:00
Michael Roth
c45a81682d hmp: re-enable trace-file command
Commit 31965ae27b reverted a previous
renaming of CONFIG_SIMPLE_TRACE->CONFIG_TRACE_SIMPLE in a couple spots,
leading to trace-file currently being unavailable.

Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-10-03 10:55:50 +01:00
Lluís
31965ae27b trace: always compile support for controlling and querying trace event states
The current interface is generic for this small set of operations, and thus
other backends can easily modify the "trace/control.c" file to add their own
implementation.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01 10:34:54 +01:00
Lluís
fc76410539 trace: separate trace event control and query routines from the simple backend
Generalize the 'st_print_trace_events' and 'st_change_trace_event_state' into
backend-specific 'trace_print_events' and 'trace_event_set_state' (respectively)
in the "trace/control.h" file.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
2011-09-01 10:34:54 +01:00
Lluís
6d8a764e0f trace: [configure] rename CONFIG_*_TRACE into CONFIG_TRACE_*
Provides a more hierarchical view of the variable domain.

Also adds the CONFIG_TRACE_* variables for all backends.

[Stefan added missing 'test' in stap if statement]

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-01 10:34:53 +01:00
Zhi Yong Wu
0f1b583ee7 HMP: Remove the duplicated info "info kvm" in hmp-commands.hx.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-08-03 11:17:36 +01:00
Jes Sorensen
d967b2f14f QMP: add snapshot-blkdev-sync command
Add QMP bits for snapshot_blkdev command. This is the same as
snapshot_blkdev in the human monitor. The command is synchronous.

In the future async commands and or a break down of the functionality
into multiple commands might be added.

Also change the 'snapshot_file' argument to 'snapshot-file' in
the human monitor, so that it matches QMP.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
2011-07-21 16:48:11 -03:00
Luiz Capitulino
e9b4b432e7 HMP: Use QMP inject nmi implementation
This **CHANGES** the human monitor "nmi" command behavior.

Currently it accepts an CPU argument which, when provided, will send
the NMI to the specified CPU. This feature is of discussable value
though and HMP shouldn't have more features than QMP, so let's use
QMP's instead (it's also simpler).

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-06-01 11:42:25 -03:00
Jes Sorensen
2ea720dba5 hmp-commands.hx: fix badly merged client_migrate_info command
client_migrate_info was merged badly, placing it between the command
and the documentation for another command. In addition it did not
respect the general rule of hmp-commands.hx, of having command
definition before the documentation.

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-03-10 16:12:21 -06:00
Jes Sorensen
982aa95532 Change snapshot_blkdev hmp to use correct argument type for device
Pointed out by Markus

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-02-10 13:23:43 +01:00
Anthony Liguori
b3a98367ee Merge remote branch 'qemu-kvm/uq/master' into staging
aliguori: fix build with !defined(KVM_CAP_ASYNC_PF)

Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-02-01 15:32:18 -06:00
Anthony Liguori
9363ee31ab Merge remote branch 'spice/spice.v29.pull' into staging
Conflicts:
	trace-events
2011-02-01 15:22:48 -06:00