If a page table is in IO memory and lookup_tb_ptr probes
the TLB it can result in a page table walk for the instruction
fetch. If this hits IO memory and io_prepare falsely assumes
it needs to do a TLB recompile.
Avoid that by setting can_do_io at the start of lookup_tb_ptr.
Link: https://lore.kernel.org/qemu-devel/CAFEAcA_a_AyQ=Epz3_+CheAT8Crsk9mOu894wbNW_FywamkZiw@mail.gmail.com/#t
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240219173153.12114-2-Jonathan.Cameron@huawei.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
By unprotecting regions, we re-instate writability and
unify regions that have been split, which may reduce
the total number of regions.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Rather than creating new data structures for vma,
rely on the IntervalTree used by walk_memory_regions.
Use PAGE_* constants, per the page table api, rather
than PROT_* constants, per the mmap api.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Use the flags that we've already saved in order to test
accessibility. Use g2h_untagged and compare guest memory
directly instead of copy_from_user.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We do not need to copy pages from guest memory before writing
them out. Because vmas are contiguous in host memory, we can
write them in one go.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fixes a bug in which write_note() wrote namesz_rounded
and datasz_rounded bytes, even though name and data
pointers contain only the unrounded number of bytes.
Instead of many small writes, allocate a block to contain all
of the elf headers and all of the notes. Copy the data into the
block piecemeal and the write it to the file as a chunk.
This also avoids the need to lseek forward for alignment.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Verify the size of the corefile vs the rlimit before
opening and creating the core file at all.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not allow changes to the set of cpus and memory regions
while we are dumping core.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Swap the ordering of vma_init and open. This will be necessary
for further changes, and adjusts the error cleanup path. Narrow
the scope of corefile, as the variable can be freed immediately
after use in open().
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
On the off-chance that one of the cleanup functions changes
errno, latch the errno that we want to return beforehand.
Flush errno to 0 upon success, rather than at the beginning.
No need to avoid negation of 0.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Ignoring the fact that g_malloc cannot fail, the structure
is quite small and might as well be allocated locally.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In fill_note_info, there were unnecessary checks for
success of g_new/g_malloc. But these structures do not
need to be dyamically allocated at all, and can in fact
be statically allocated within the parent structure.
This removes all error paths from fill_note_info, so
change the return type to void.
Change type of signr to match both caller (elf_core_dump)
and callee (fill_prstatus), which both use int for signr.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Do not dump core at all if getrlimit fails; this ensures
that dumpsize is valid throughout the function, not just
for the initial test vs rlim_cur.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Fabiano's fixed-ram patches (1-5 only)
- Peter's cleanups on multifd tls IOC referencing
- Steve's cpr patches for vfio (migration patches only)
- Fabiano's fix on mbps stats racing with COMPLETE state
- Fabiano's fix on return path thread hang
-----BEGIN PGP SIGNATURE-----
iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E
HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0=
=P2QF
-----END PGP SIGNATURE-----
Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull request
- Fabiano's fixed-ram patches (1-5 only)
- Peter's cleanups on multifd tls IOC referencing
- Steve's cpr patches for vfio (migration patches only)
- Fabiano's fix on mbps stats racing with COMPLETE state
- Fabiano's fix on return path thread hang
# -----BEGIN PGP SIGNATURE-----
#
# iIcEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZd7AbhIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wbg0gDyA3Vg3pIqCJ+u+hLZ+QKxY/pnu8Y5kF+E
# HK2IdslQUQD+OX4ATUnl+CGMiVX9fjs1fKx0Z0Qetq8gC1YJF13yuA0=
# =P2QF
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Feb 2024 05:11:10 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (25 commits)
migration: Use migrate_has_error() in close_return_path_on_source()
migration: Join the return path thread before releasing to_dst_file
migration: Fix qmp_query_migrate mbps value
migration: options incompatible with cpr
migration: update cpr-reboot description
migration: stop vm for cpr
migration: notifier error checking
migration: refactor migrate_fd_connect failures
migration: per-mode notifiers
migration: MigrationNotifyFunc
migration: remove postcopy_after_devices
migration: MigrationEvent for notifiers
migration: convert to NotifierWithReturn
migration: remove error from notifier data
notify: pass error to notifier with return
migration/multifd: Drop unnecessary helper to destroy IOC
migration/multifd: Cleanup outgoing_args in state destroy
migration/multifd: Make multifd_channel_connect() return void
migration/multifd: Drop registered_yank
migration/multifd: Cleanup TLS iochannel referencing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- fix some test/tcg license headers to GPLv2+
- bump up check-tcg timeout to 120s
- avoid re-building VM images too often
- update OpenBSD to 7.4
- use GDBFeature to build gdbstub XML
- unify plugin vcpu count under qemu_plugin_num_vcpus
- avoid spurious idle/resume callbacks on new vCPUs
- ensure nios2-linux-user processes async work
- call vcpu_init plugin callback through async work
- define plugin helpers when registers being read
- add plugin API for reading register values
- add support for register tracking to execlog
- update plugin docs with assumptions
- mention plugins can trigger tb_flush in mttcg design doc
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXfAv0ACgkQ+9DbCVqe
KkQyogf/X6T5lWsdZGb22FOYzaTLf5gfCPXArIVN+GsjSae3dU6qy/qVM1VRJQPw
mH8kvMY7QO5V9M2tL33WtZZg6hqWypXYU+Hit6sMmveKYMKS9ESEX28x3yybgt8Y
fyDywNODX7bs8Wb6NQjVkZvTmM2llrHEtQXPffaXaPyxOAzlGTV9Mf3Sop9rk4nG
8IchzLmOOQ7XnVst/KRyq+29oOYsbyUtj13tNeWBZ5iXFDT6Q/nGwPQ12U2Ztn9N
FZvyzGG707dFaEDxIr4pl7n+lHJto29LMlSXlocANwG6wFNP3nfkSw/dXw3nkZZK
pOfrQKvnnunJKBd7495LYZxTDe505Q==
=/k97
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-updates-280224-1' of https://gitlab.com/stsquad/qemu into staging
Testing, gdbstub and plugin updates:
- fix some test/tcg license headers to GPLv2+
- bump up check-tcg timeout to 120s
- avoid re-building VM images too often
- update OpenBSD to 7.4
- use GDBFeature to build gdbstub XML
- unify plugin vcpu count under qemu_plugin_num_vcpus
- avoid spurious idle/resume callbacks on new vCPUs
- ensure nios2-linux-user processes async work
- call vcpu_init plugin callback through async work
- define plugin helpers when registers being read
- add plugin API for reading register values
- add support for register tracking to execlog
- update plugin docs with assumptions
- mention plugins can trigger tb_flush in mttcg design doc
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXfAv0ACgkQ+9DbCVqe
# KkQyogf/X6T5lWsdZGb22FOYzaTLf5gfCPXArIVN+GsjSae3dU6qy/qVM1VRJQPw
# mH8kvMY7QO5V9M2tL33WtZZg6hqWypXYU+Hit6sMmveKYMKS9ESEX28x3yybgt8Y
# fyDywNODX7bs8Wb6NQjVkZvTmM2llrHEtQXPffaXaPyxOAzlGTV9Mf3Sop9rk4nG
# 8IchzLmOOQ7XnVst/KRyq+29oOYsbyUtj13tNeWBZ5iXFDT6Q/nGwPQ12U2Ztn9N
# FZvyzGG707dFaEDxIr4pl7n+lHJto29LMlSXlocANwG6wFNP3nfkSw/dXw3nkZZK
# pOfrQKvnnunJKBd7495LYZxTDe505Q==
# =/k97
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 28 Feb 2024 09:55:09 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-updates-280224-1' of https://gitlab.com/stsquad/qemu: (29 commits)
docs/devel: plugins can trigger a tb flush
docs/devel: document some plugin assumptions
docs/devel: lift example and plugin API sections up
contrib/plugins: extend execlog to track register changes
contrib/plugins: fix imatch
tests/tcg: expand insn test case to exercise register API
plugins: add an API to read registers
plugins: create CPUPluginState and migrate plugin_mask
gdbstub: expose api to find registers
plugins: Use different helpers when reading registers
cpu: call plugin init hook asynchronously
linux-user: ensure nios2 processes queued work
plugins: fix order of init/idle/resume callback
plugins: add qemu_plugin_num_vcpus function
plugins: remove previous n_vcpus functions from API
gdbstub: Add members to identify registers to GDBFeature
hw/core/cpu: Remove gdb_get_dynamic_xml member
gdbstub: Infer number of core registers from XML
gdbstub: Simplify XML lookup
gdbstub: Change gdb_get_reg_cb and gdb_set_reg_cb
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When scoreboards need to be reallocated.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213094009.150349-8-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-30-alex.bennee@linaro.org>
While we attempt to hide implementation details from the plugin we
shouldn't be totally obtuse. Let the user know what they can and can't
expect with the various instrumentation options.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-29-alex.bennee@linaro.org>
This makes them a bit more visible in the TCG emulation menu rather
than hiding them away bellow the ToC limit.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-28-alex.bennee@linaro.org>
With the new plugin register API we can now track changes to register
values. Currently the implementation is fairly dumb which will slow
down if a large number of register values are being tracked. This
could be improved by only instrumenting instructions which mention
registers we are interested in tracking.
Example usage:
./qemu-aarch64 -D plugin.log -d plugin \
-cpu max,sve256=on \
-plugin contrib/plugins/libexeclog.so,reg=sp,reg=z\* \
./tests/tcg/aarch64-linux-user/sha512-sve
will display in the execlog any changes to the stack pointer (sp) and
the SVE Z registers.
As testing registers every instruction will be quite a heavy operation
there is an additional flag which attempts to optimise the register
tracking by only instrumenting instructions which are likely to change
its value. This relies on the QEMU disassembler showing up the register
names in disassembly so is an explicit opt-in.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Based-On: <20231025093128.33116-19-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-27-alex.bennee@linaro.org>
We can't directly save the ephemeral imatch from argv as that memory
will get recycled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-26-alex.bennee@linaro.org>
This ensure we at least read every register the plugin API reports at
least once during the check-tcg checks.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-25-alex.bennee@linaro.org>
We can only request a list of registers once the vCPU has been
initialised so the user needs to use either call the get function on
vCPU initialisation or during the translation phase.
We don't expose the reg number to the plugin instead hiding it behind
an opaque handle. For now this is just the gdb_regnum encapsulated in
an anonymous GPOINTER but in future as we add more state for plugins
to track we can expand it.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1706
Based-on: <20231025093128.33116-18-akihiko.odaki@daynix.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-24-alex.bennee@linaro.org>
As we expand the per-vCPU data for plugins we don't want to pollute
CPUState. For now this just moves the plugin_mask (renamed to
event_mask) as the memory callbacks are accessed directly by TCG
generated code.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-23-alex.bennee@linaro.org>
Expose an internal API to QEMU to return all the registers for a vCPU.
The list containing the details required to called gdb_read_register().
Based-on: <20231025093128.33116-15-akihiko.odaki@daynix.com>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-22-alex.bennee@linaro.org>
This ensures we run during a cpu_exec, which allows to call start/end
exclusive from this init hook (needed for new scoreboard API introduced
later).
async work is run before any tb is translated/executed, so we can
guarantee plugin init will be called before any other hook.
The previous change made sure that any idle/resume cb call will not be
done before initializing plugin for a given vcpu.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240213094009.150349-5-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-20-alex.bennee@linaro.org>
While async processes are rare for linux-user we do use them from time
to time. The most obvious one is tb_flush when we run out of
translation space. We will also need this when we move plugin
vcpu_init to an async task.
Fix nios2 to follow its older, wiser and more stable siblings.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-19-alex.bennee@linaro.org>
We found that vcpu_init_hook was called *after* idle callback.
vcpu_init is called from cpu_realize_fn, while idle/resume cb are called
from qemu_wait_io_event (in vcpu thread).
This change ensures we only call idle and resume cb only once a plugin
was init for a given vcpu.
Next change in the series will run vcpu_init asynchronously, which will
make it run *after* resume callback as well. So we fix this now.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240213094009.150349-4-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-18-alex.bennee@linaro.org>
We now keep track of how many vcpus were started. This way, a plugin can
easily query number of any vcpus at any point of execution, which
unifies user and system mode workflows.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213094009.150349-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-17-alex.bennee@linaro.org>
This information is already accessible using qemu_info_t during plugin
install.
We will introduce another function (qemu_plugin_num_vcpus) which
represent how many cpus were enabled, by tracking new cpu indexes.
It's a breaking change, so we bump API version.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213094009.150349-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-16-alex.bennee@linaro.org>
These members will be used to help plugins to identify registers.
The added members in instances of GDBFeature dynamically generated by
CPUs will be filled in later changes.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231213-gdb-v17-10-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-15-alex.bennee@linaro.org>
This function is no longer used.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-9-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-14-alex.bennee@linaro.org>
GDBFeature has the num_regs member so use it where applicable to
remove magic numbers.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231213-gdb-v17-8-777047380591@daynix.com>
[AJB: remove core reg check from microblaze read reg]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-13-alex.bennee@linaro.org>
Now we know all instances of GDBFeature that is used in CPU so we can
traverse them to find XML. This removes the need for a CPU-specific
lookup function for dynamic XMLs.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-7-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-12-alex.bennee@linaro.org>
Align the parameters of gdb_get_reg_cb and gdb_set_reg_cb with the
gdb_read_register and gdb_write_register members of CPUClass to allow
to unify the logic to access registers of the core and coprocessors
in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-6-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-11-alex.bennee@linaro.org>
Simplify GDBRegisterState by replacing num_regs and xml members with
one member that points to GDBFeature.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231213-gdb-v17-5-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-10-alex.bennee@linaro.org>
This is a tree-wide change to introduce GDBFeature parameter to
gdb_register_coprocessor(). The new parameter just replaces num_regs
and xml parameters for now. GDBFeature will be utilized to simplify XML
lookup in a following change.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231213-gdb-v17-4-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-9-alex.bennee@linaro.org>
In preparation for a change to use GDBFeature as a parameter of
gdb_register_coprocessor(), convert the internal representation of
dynamic feature from plain XML to GDBFeature.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231213-gdb-v17-3-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-8-alex.bennee@linaro.org>
In preparation for a change to use GDBFeature as a parameter of
gdb_register_coprocessor(), convert the internal representation of
dynamic feature from plain XML to GDBFeature.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231213-gdb-v17-2-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-7-alex.bennee@linaro.org>
In preparation for a change to use GDBFeature as a parameter of
gdb_register_coprocessor(), convert the internal representation of
dynamic feature from plain XML to GDBFeature.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231213-gdb-v17-1-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-6-alex.bennee@linaro.org>
The old links are dead so even if we have the ISO cached we can't
finish the install. Update to the current stable and tweak the install
strings.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2192
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-5-alex.bennee@linaro.org>
The main problem is that "check-venv" is a .PHONY target will always
evaluate and trigger a full re-build of the VM images. While its
tempting to drop it from the dependencies that does introduce a
breakage on freshly configured builds.
Fortunately we do have the otherwise redundant --force flag for the
script which up until now was always on. If we make the usage of
--force conditional on dependencies other than check-venv triggering
the update we can avoid the costly rebuild and still run cleanly on a
fresh checkout.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2118
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-4-alex.bennee@linaro.org>
This is less than ideal but easier than making sure we get all the
iterations of the memory test. Update the comment accordingly.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-3-alex.bennee@linaro.org>
My default header template is GPLv3 but for QEMU code we really should
stick to GPLv2-or-later (allowing others to up-license it if they
wish). While this is test code we should still be consistent on the
source distribution.
I wrote all of this code so its not a problem. However there remains
one GPLv3 file left which is the crt0-tc2x.S for TriCore.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-2-alex.bennee@linaro.org>
close_return_path_on_source() retrieves the migration error from the
the QEMUFile '->to_dst_file' to know if a shutdown is required. This
shutdown is required to exit the return-path thread.
Avoid relying on '->to_dst_file' and use migrate_has_error() instead.
(using to_dst_file is a heuristic to infer whether
rp_state.from_dst_file might be stuck on a recvmsg(). Using a generic
method for detecting errors is more reliable. We also want to reduce
dependency on QEMUFile::last_error)
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
[added some words about the motivation for this patch]
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240226203122.22894-3-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
The return path thread might hang at a blocking system call. Before
joining the thread we might need to issue a shutdown() on the socket
file descriptor to release it. To determine whether the shutdown() is
necessary we look at the QEMUFile error.
Make sure we only clean up the QEMUFile after the return path has been
waited for.
This fixes a hang when qemu_savevm_state_setup() produced an error
that was detected by migration_detect_error(). That skips
migration_completion() so close_return_path_on_source() would get
stuck waiting for the RP thread to terminate.
Reported-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240226203122.22894-2-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
