We add almost full TCP state machine in filter-rewriter, except
TCPS_LISTEN and some simplify in VM active close FIN states.
The reason for this simplify job is because guest kernel will track
the TCP status and wait 2MSL time too, if client resend the FIN packet,
guest will resend the last ACK, so we needn't wait 2MSL time in filter-rewriter.
After a net connection is closed, we didn't clear its related resources
in connection_track_table, which will lead to memory leak.
Let's track the state of net connection, if it is closed, its related
resources will be cleared up.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This should have been removed as part of commit
692fbdf9f4.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generic-loader is currently compiled target specific due to one
single "#ifdef TARGET_WORDS_BIGENDIAN" in the file. We have already a
function called target_words_bigendian() for this instead, so we can
put the generic-loader into common-obj to save some compilation time.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We've got three places already that provide a prototype for this
function in a .c file - that's ugly. Let's provide a proper prototype
in a header instead, with a proper description why this function should
not be used in most cases.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Each device that is instantiatable by the users should be marked with
a category. Since the generic-loader does not fit anywhere else, put
it into the MISC category.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Older versions of Clang (before 3.5) and GCC (before 4.1) do not
support the "__attribute__((flatten))" yet. We don't care about
such old versions of GCC anymore, but since Clang 3.4 is still
used in EPEL for RHEL7 / CentOS 7, we should not use this attribute
directly but with a wrapper macro instead.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This probably happened when interpreting the utf8 name as latin1.
Fixes dbbaaff686 and f4e94dfefb.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
On PCXS chips (PA7000, pa 1.1a), trap #18 is raised on memory faults,
while all later chips (>= PA7100) generate either trap #26, #27 or #28
(depending on the fault type).
Since the current qemu emulation emulates a B160L machine (with a
PA7300LC PCX-L2 chip, we should raise trap #26 (EXCP_DMAR) instead
of #18 (EXCP_DMP) on access faults by the Linux kernel to page zero.
With the patch we now get the correct output (I tested against real
hardware):
Kernel Fault: Code=26 (Data memory access rights trap)
instead of:
Kernel Fault: Code=18 (Data memory protection/unaligned access trap)
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20181007205153.GA30270@ls3530.fritz.box>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* hw/arm/virt: add DT property /secure-chosen/stdout-path indicating secure UART
* target/arm: Fix aarch64_sve_change_el wrt EL0
* target/arm: Define fields of ISAR registers
* target/arm: Align cortex-r5 id_isar0
* target/arm: Fix cortex-a7 id_isar0
* net/cadence_gem: Fix various bugs, add support for new
features that will be used by the Xilinx Versal board
* target-arm: powerctl: Enable HVC when starting CPUs to EL2
* target/arm: Add the Cortex-A72
* target/arm: Mark PMINTENCLR and PMINTENCLR_EL1 accesses as possibly doing IO
* target/arm: Mask PMOVSR writes based on supported counters
* target/arm: Initialize ARMMMUFaultInfo in v7m_stack_read/write
* coccinelle: new inplace-byteswaps.cocci to remove inplace-byteswapping calls
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=T/np
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20181016-1' into staging
target-arm queue:
* hw/arm/virt: add DT property /secure-chosen/stdout-path indicating secure UART
* target/arm: Fix aarch64_sve_change_el wrt EL0
* target/arm: Define fields of ISAR registers
* target/arm: Align cortex-r5 id_isar0
* target/arm: Fix cortex-a7 id_isar0
* net/cadence_gem: Fix various bugs, add support for new
features that will be used by the Xilinx Versal board
* target-arm: powerctl: Enable HVC when starting CPUs to EL2
* target/arm: Add the Cortex-A72
* target/arm: Mark PMINTENCLR and PMINTENCLR_EL1 accesses as possibly doing IO
* target/arm: Mask PMOVSR writes based on supported counters
* target/arm: Initialize ARMMMUFaultInfo in v7m_stack_read/write
* coccinelle: new inplace-byteswaps.cocci to remove inplace-byteswapping calls
# gpg: Signature made Tue 16 Oct 2018 17:42:01 BST
# gpg: using RSA key 3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20181016-1:
coccinelle: new inplace-byteswaps.cocci to remove inplace-byteswapping calls
target/arm: Initialize ARMMMUFaultInfo in v7m_stack_read/write
target/arm: Mask PMOVSR writes based on supported counters
target/arm: Mark PMINTENCLR and PMINTENCLR_EL1 accesses as possibly doing IO
target/arm: Add the Cortex-A72
target-arm: powerctl: Enable HVC when starting CPUs to EL2
net: cadence_gem: Implement support for 64bit descriptor addresses
net: cadence_gem: Add support for selecting the DMA MemoryRegion
net: cadence_gem: Add support for extended descriptors
net: cadence_gem: Add macro with max number of descriptor words
net: cadence_gem: Use uint32_t for 32bit descriptor words
net: cadence_gem: Disable TSU feature bit
target/arm: Fix cortex-a7 id_isar0
target/arm: Align cortex-r5 id_isar0
target/arm: Define fields of ISAR registers
target/arm: Fix aarch64_sve_change_el wrt EL0
hw/arm/virt: add DT property /secure-chosen/stdout-path indicating secure UART
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using $()
everywhere.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using $()
everywhere.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Various shell files contain a mix between obsolete ``
and modern $(); It would be nice to convert to using $()
everywhere.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a new Coccinelle script which replaces uses of the inplace
byteswapping functions *_to_cpus() and cpu_to_*s() with their
not-in-place equivalents. This is useful for where the swapping
is done on members of a packed struct -- taking the address
of the member to pass it to an inplace function is undefined
behaviour in C.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181009181612.10633-1-peter.maydell@linaro.org
The get_phys_addr() functions take a pointer to an ARMMMUFaultInfo
struct, which they fill in only if a fault occurs. This means that
the caller must always zero-initialize the struct before passing
it in. We forgot to do this in v7m_stack_read() and v7m_stack_write().
Correct the error.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181011172057.9466-1-peter.maydell@linaro.org
This is an amendment to my earlier patch:
commit 7ece99b17e
Author: Aaron Lindsay <alindsay@codeaurora.org>
Date: Thu Apr 26 11:04:39 2018 +0100
target/arm: Mask PMU register writes based on PMCR_EL0.N
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-3-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
I previously fixed this for PMINTENSET_EL1, but missed these.
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org>
Signed-off-by: Aaron Lindsay <aclindsa@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181010203735.27918-2-aclindsa@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the ARM Cortex-A72.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-11-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When QEMU provides the equivalent of the EL3 firmware, we
need to enable HVCs in scr_el3 when turning on CPUs that
target EL2.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-10-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement support for 64bit descriptor addresses.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-8-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for selecting the Memory Region that the GEM
will do DMA to.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20181011021931.4249-7-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for extended descriptors with optional 64bit
addressing and timestamping. QEMU will not yet provide
timestamps (always leaving the valid timestamp bit as zero).
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-6-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add macro with max number of DMA descriptor words.
No functional change.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-5-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use uint32_t instead of unsigned to describe 32bit descriptor words.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-4-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
E-mail to one of block/sheepdog maintainers Mitake Hitoshi bounces
<mitake.hitoshi@lab.ntt.co.jp>: unknown user: "mitake.hitoshi"
and no current address is known. So just remove it.
Signed-off-by: Liu Yuan <liuyuan1@cmiot.chinamobile.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Commit 31d2dda ("build-system: remove per-test GCOV reporting", 2018-06-20)
removed users of the variables, since those uses can be replaced by a simple
overall report produced by gcovr. However, the variables were never removed.
Do it now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[thuth: Fixed up contextual conflicts with the patch from Eric]
Signed-off-by: Thomas Huth <thuth@redhat.com>
GNU make is perfectly happy to use 'check-FOO-y += bar' to
initialize check-FOO-y. (GNU Automake strictly insists that
you cannot use += until after an initial = per variable, but
thankfully we aren't using automake).
As we have had more than one instance where copy-and-paste of
'check-FOO-y = bar' from a first test under category FOO into
an additional test, which ends up disabling the first (see
commits 992159c7 and 4429532b), it's better to just always use
the form that survives copy-and-paste, even for categories that
don't currently add more than one test.
Done with s/^\(check-[a-z]*-y \)=/\1+=/g
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The gen_BUG() function calls already cpu_abort(), which prints the
information to stderr and the log already. So instead of additionally
printing the dc->pc via fprintf() and qemu_log here, too, we can
simply pass this information to cpu_abort() instead.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently the copyright date is set to 2017. Update the date to say
2018.
Signed-off-by: John Arbuckle <programmingkidx@gmail.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Disable the Timestamping Unit feature bit since QEMU does not
yet support it. This allows guest SW to correctly probe for
its existance.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20181011021931.4249-2-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The incorrect value advertised only thumb2 div without arm div.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The missing nibble made it more difficult to read.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-5-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
At present we assert:
arm_el_is_aa64: Assertion `el >= 1 && el <= 3' failed.
The comment in arm_el_is_aa64 explains why asking about EL0 without
extra information is impossible. Add an extra argument to provide
it from the surrounding context.
Fixes: 0ab5953b00
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181008212205.17752-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Bindings for /secure-chosen and /secure-chosen/stdout-path have been
proposed 1.5 years ago [1] and implemented in OP-TEE at the same time [2].
They've now been officially agreed on, so we can implement them
in QEMU.
This patch creates the property when the machine is secure.
[1] https://patchwork.kernel.org/patch/9602401/
[2] https://github.com/OP-TEE/optee_os/commit/4dc31c52544a
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Message-id: 20181005080729.6480-1-jerome.forissier@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: commit message tweak]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Define a TYPE_VFIO_PCI and drop DO_UPCAST.
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Allow the instantation of generic dynamic vfio-platform devices again,
without the need to create a new device-specific vfio type.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Up to now we have relied on the device type to identify a device tree
node creation function. Since we would like the vfio-platform device to
be instantiable with different compatible strings we introduce the
capability to specialize the node creation depending on actual
compatible value.
NodeCreationPair is renamed into BindingEntry. The struct is enhanced
with compat and match_fn() fields. We introduce a new matching function
adapted to the vfio-platform generic device.
Soon, the AMD XGBE can be instantiated with either manner, i.e.:
-device vfio-amd-xgbe,host=e0900000.xgmac
or using the new option line:
-device vfio-platform,host=e0900000.xgmac
Signed-off-by: Eric Auger <eric.auger@redhat.com>
[geert: Match using compatible values in sysfs instead of user-supplied
manufacturer/model options, reword]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Up to now the vfio-platform device has been abstract and could not be
instantiated. The integration of a new vfio platform device required
creating a dummy derived device which only set the compatible string.
Following the few vfio-platform device integrations we have seen the
actual requested adaptation happens on device tree node creation
(sysbus-fdt).
Hence remove the abstract setting, and read the list of compatible
values from sysfs if not set by a derived device.
Update the amd-xgbe and calxeda-xgmac drivers to fill in the number of
compatible values, as there can now be more than one.
Note that sysbus-fdt does not support the instantiation of the
vfio-platform device yet.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
[geert: Rebase, set user_creatable=true, use compatible values in sysfs
instead of user-supplied manufacturer/model options, reword]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
So we have a boot display when using a vgpu as primary display.
ramfb depends on a fw_cfg file. fw_cfg files can not be added and
removed at runtime, therefore a ramfb-enabled vfio device can't be
hotplugged.
Add a nohotplug variant of the vfio-pci device (as child class). Add
the ramfb property to the nohotplug variant only. So to enable the vgpu
display with boot support use this:
-device vfio-pci-nohotplug,display=on,ramfb=on,sysfsdev=...
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Needed to make sure code using ramfb (vfio) compiles properly even on
platforms without fw_cfg (and therefore no ramfb) support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Difficult to make use of if not installed
Fixes: cd1bfd5ef3 ("seabios: update bios and vgabios binaries")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 153936155938.28040.11513367417790075721.stgit@gimli.home
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In downstream distros like RHEL we'd like to disable some of the "legacy"
devices of QEMU. The ISA version of the Cirrus VGA device is one of these
legacy devices. So let's make the build process a little bit more flexible
here by putting the Cirrus ISA code into a separate file which is only
included if both, CONFIG_VGA_CIRRUS and CONFIG_VGA_ISA are set.
Note that this disables "isa-cirrus-vga" for the ppc-softmmu and the
alpha-softmmu target since CONFIG_VGA_ISA is not set there. But I think
this is OK since these targets are only interested in the PCI variant
anyway.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1539339106-32427-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This also makes the default display resolution configurable,
via xres and yres properties. The default is 1024x768.
The old code had a hard-coded resolution of 1600x1200.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181005110837.28209-1-kraxel@redhat.com
