ISM device firmware stores unique state information that can
can cause a wholesale unmap of the associated IOMMU (e.g. when
we get a termination signal for QEMU) to trigger firmware errors
because firmware believes we are attempting to invalidate entries
that are still in-use by the guest OS (when in fact that guest is
in the process of being terminated or rebooted).
To alleviate this, register both a shutdown notifier (for unexpected
termination cases e.g. virsh destroy) as well as a reset callback
(for cases like guest OS reboot). For each of these scenarios, trigger
PCI device reset; this is enough to indicate to firmware that the IOMMU
is no longer in-use by the guest OS, making it safe to invalidate any
associated IOMMU entries.
Fixes: 15d0e7942d ("s390x/pci: don't fence interpreted devices without MSI-X")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221209195700.263824-1-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
[thuth: Adjusted the hunk in s390-pci-vfio.c due to different context]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, s390x-pci performs accounting against the vfio DMA
limit and triggers the guest to clean up mappings when the limit
is reached. Let's go a step further and also limit the size of
the supported DMA aperture reported to the guest based upon the
initial vfio DMA limit reported for the container (if less than
than the size reported by the firmware/host zPCI layer). This
avoids processing sections of the guest DMA table during global
refresh that, for common use cases, will never be used anway, and
makes exhausting the vfio DMA limit due to mismatch between guest
aperture size and host limit far less likely and more indicitive
of an error.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221028194758.204007-4-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, each unmapped page is handled as an individual iommu
region notification. Attempt to group contiguous unmap operations
into fewer notifications to reduce overhead.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221028194758.204007-3-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Fix typos (discovered with the 'codespell' utility).
Note: Though "migrateable" still seems to be a valid spelling, we change
it to "migratable" since this is the way more common spelling here.
Message-Id: <20221111182828.282251-1-thuth@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
zPCI enhancement features (interpretation and forward assist) were
recently introduced to improve performance on PCI passthrough devices.
To maintain the same behaviour on older Z machines, deactivate the
features with the associated properties.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-3-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This reverts commit 59d1ce4439.
The "zpcii-disable" machine property is redundant with the "interpret"
zPCI device property. Remove it for clarification.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20221107161349.1032730-2-clg@kaod.org>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The S390 CPU topology accepts the smp.threads argument while
in reality it does not effectively allow multthreading.
Let's keep this behavior for machines older than 7.2 and
refuse to use threads in newer machines until multithreading
is really exposed to the guest by the machine.
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20221103170150.20789-3-pmorel@linux.ibm.com>
[thuth: Small fixes to the commit description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Currently, when running 'qemu-system-s390x -M s390-ccw-virtio,help'
the s390x-specific properties are not listed anymore. This happens
because since commit d8fb7d0969 ("vl: switch -M parsing to keyval")
the properties have to be defined at the class level and not at the
instance level anymore. Fix it on s390x now, too, by moving the
registration of the properties to the class level"
Fixes: d8fb7d0969 ("vl: switch -M parsing to keyval")
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20221103170150.20789-2-pmorel@linux.ibm.com>
[thuth: Add patch description]
Signed-off-by: Thomas Huth <thuth@redhat.com>
If we encounter a new mapping while the number of available DMA entries
in vfio is 0, we are currently skipping that mapping which is a problem
if we manage to free up DMA space after that within the same RPCIT --
we will return to the guest with CC0 and have not mapped everything
within the specified range. This issue was uncovered while testing
changes to the s390 linux kernel iommu/dma code, where a different
usage pattern was employed (new mappings start at the end of the
aperture and work back towards the front, making us far more likely
to encounter new mappings before invalidated mappings during a
global refresh).
Fix this by tracking whether any mappings were skipped due to vfio
DMA limit hitting 0; when this occurs, we still continue the range
and unmap/map anything we can - then we must re-run the range again
to pickup anything that was missed. This must occur in a loop until
all requests are satisfied (success) or we detect that we are still
unable to complete all mappings (return ZPCI_RPCIT_ST_INSUFF_RES).
Link: https://lore.kernel.org/linux-s390/20221019144435.369902-1-schnelle@linux.ibm.com/
Fixes: 37fa32de70 ("s390x/pci: Honor DMA limits set by vfio")
Reported-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20221028194758.204007-2-mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Revert the control and flag bits in the subchannel status word in case
the SSCH operation fails with non-zero CC (ditto for CSCH and HSCH).
According to POPS, the control and flag bits are only changed if SSCH,
CSCH, and HSCH return CC 0, and no other action should be taken otherwise.
In order to simulate that after the fact, the bits need to be reverted on
non-zero CC.
While the do_subchannel_work logic for virtual (virtio) devices will
return condition code 0, passthrough (vfio) devices may encounter
errors from either the host kernel or real hardware that need to be
accounted for after this point. This includes restoring the state of
the Subchannel Status Word to reflect the subchannel, as these bits
would not be set in the event of a non-zero condition code from the
affected instructions.
Experimentation has shown that a failure on a START SUBCHANNEL (SSCH)
to a passthrough device would leave the subchannel with the START
PENDING activity control bit set, thus blocking subsequent SSCH
operations in css_do_ssch() until some form of error recovery was
undertaken since no interrupt would be expected.
Signed-off-by: Peter Jin <pjin@linux.ibm.com>
Message-Id: <20221027212341.2904795-1-pjin@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
[thuth: Updated the commit description to Eric's suggestion]
Signed-off-by: Thomas Huth <thuth@redhat.com>
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
-----BEGIN PGP SIGNATURE-----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=h0Ep
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu into staging
* Fix and test the VISTR instruction on s390x
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNb1x8RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXmcA//TCliiFkhprVxzIqy7zb9uz2Odu+sS4dT
# azUSlXvC14fECm/Rb/rd2VLqCu5x2er8CYauxKQ4VhRImzcDta4kvpt/HKIppN2t
# sqw5tipJL0DYcWBwYL1llvfutM26M+Oh0igwR8uV7b+W1FjojEZdcOr9IZ6E6V55
# wQCE5OHm0VCr61QeI5IBfZTsiPo+DFomUCpj7w66j6i0CVDvmpoe36tCmvGgrcpZ
# SP7ep7/Iq+dnGh2YnJyoUOPlXeeiBCxAygOVnIRXptDeniGoliCFn7ksLdKDQ9qY
# 69pSPR/W7mTZB/HkCRalAbYuYrI9Rcqxdu6c9vcyB8Pr0snQLTf8qThY+BJ2oC4w
# JSGgWVniAk5MmrDazwNRkSbgngYLYf+CcT1h5AANuU5Kt50Bdy9Y3TuL5YVmofEp
# N4bypV0ICImQyDECz76+i5/iJOcWiRyjMfLT6y00dspeuy983xHakrsHGD8xj0U/
# 3IVxnF9bDnUSVg6lFhYrgCB3dRG1TNPJoYQOM7raS5MAPRrDtIuSabwtyn84jo4+
# 9kZRPJBriMBHNsCjGVlJ9CATmaK1SKVAbRcabjgOKoIwhZTpAe6JalykREUJlTys
# hB2V//lWWYPaSpzwY+OkvxoOmJIziixEskOmx6hPcoxID5v/bqlR69W15aUlKuLq
# VWFb+/yMvaE=
# =h0Ep
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 28 Oct 2022 09:20:31 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu: (21 commits)
tests/qtest: libqtest: Correct the timeout unit of blocking receive calls for win32
tests/qtest: libqos: Do not build virtio-9p unconditionally
tests/qtest: migration-test: Make sure QEMU process "to" exited after migration is canceled
tests/qtest: libqtest: Introduce qtest_wait_qemu()
tests/qtest: Use EXIT_FAILURE instead of magic number
tests/qtest: device-plug-test: Reverse the usage of double/single quotes
tests/qtest: Support libqtest to build and run on Windows
tests/qtest: Use send/recv for socket communication
accel/qtest: Support qtest accelerator for Windows
tests: Add sndio to the FreeBSD CI containers / VM
tests/vm: update openbsd to release 7.2
tests/qtest/libqos/e1000e: Use e1000_regs.h
tests/qtest/cxl-test: Remove temporary directories after testing
tests/qtest/tpm: Clean up remainders of swtpm
MAINTAINERS: target/s390x/: add Ilya as reviewer
tests/tcg/s390x: Add a test for the vistr instruction
target/s390x: Fix emulation of the VISTR instruction
tests/tcg/s390x: Test compiler flags only once, not every time
s390x/tod-kvm: don't save/restore the TOD in PV guests
s390x: step down as general arch maintainer
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Snapshot loading only expects to call deterministic handlers, not
non-deterministic ones. So introduce a way of registering handlers that
won't be called when reseting for snapshots.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Message-id: 20221025004327.568476-2-Jason@zx2c4.com
[PMM: updated json doc comment with Markus' text; fixed
checkpatch style nit]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Under PV, the guest's TOD clock is under control of the ultravisor and the
hypervisor cannot change it.
With upcoming kernel changes[1], the Linux kernel will reject QEMU's
request to adjust the guest's clock in this case, so don't attempt to set
the clock.
This avoids the following warning message on save/restore of a PV guest:
warning: Unable to set KVM guest TOD clock: Operation not supported
[1] https://lore.kernel.org/all/20221011160712.928239-2-nrb@linux.ibm.com/
Fixes: c3347ed0d2 ("s390x: protvirt: Support unpack facility")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Message-Id: <20221012123229.1196007-1-nrb@linux.ibm.com>
[thuth: Add curly braces]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove spurious semicolon at the end of the macro s390_pv_cmd
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20221010151041.89071-1-imbrenda@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's add a few bits of code which hide the new KVM PV dump API from
us via new functions.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
[ Marc-André: fix up for compilation issue ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221017083822.43118-10-frankja@linux.ibm.com>
Introduce an interface over which we can get information about UV data.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221017083822.43118-8-frankja@linux.ibm.com>
The zpcii-disable machine property can be used to force-disable the use
of zPCI interpretation facilities for a VM. By default, this setting
will be off for machine 7.2 and newer.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-9-mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[thuth: Fix contextual conflict in ccw_machine_7_1_instance_options()]
Signed-off-by: Thomas Huth <thuth@redhat.com>
The maximum supported store block length might be different depending
on whether the instruction is interpretively executed (firmware-reported
maximum) or handled via userspace intercept (host kernel API maximum).
Choose the best available value during group creation.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-8-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use the reserved pool of simulated PCI groups to allow intercept
devices to have separate groups from interpreted devices as some group
values may be different. If we run out of simulated PCI groups, subsequent
intercept devices just get the default group.
Furthermore, if we encounter any PCI groups from hostdevs that are marked
as simulated, let's just assign them to the default group to avoid
conflicts between host simulated groups and our own simulated groups.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-7-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Use the associated kvm ioctl operation to enable adapter event notification
and forwarding for devices when requested. This feature will be set up
with or without firmware assist based upon the 'forwarding_assist' setting.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20220902172737.170349-6-mjrosato@linux.ibm.com>
[thuth: Rename "forwarding_assist" property to "forwarding-assist"]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Lack of MSI-X support is not an issue for interpreted passthrough
devices, so let's let these in. This will allow, for example, ISM
devices to be passed through -- but only when interpretation is
available and being used.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-5-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
If the ZPCI_OP ioctl reports that is is available and usable, then the
underlying KVM host will enable load/store intepretation for any guest
device without a SHM bit in the guest function handle. For a device that
will be using interpretation support, ensure the guest function handle
matches the host function handle; this value is re-checked every time the
guest issues a SET PCI FN to enable the guest device as it is the only
opportunity to reflect function handle changes.
By default, unless interpret=off is specified, interpretation support will
always be assumed and exploited if the necessary ioctl and features are
available on the host kernel. When these are unavailable, we will silently
revert to the interception model; this allows existing guest configurations
to work unmodified on hosts with and without zPCI interpretation support,
allowing QEMU to choose the best support model available.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220902172737.170349-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to interface with the underlying host zPCI device, we need
to know its function handle. Add a routine to grab this from the
vfio CLP capabilities chain.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20220902172737.170349-3-mjrosato@linux.ibm.com>
[thuth: Replace free(info) with g_free(info)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
In order to fully support MSA_EXT_5, we have to support the SHA-512
special instructions. So implement those.
The implementation began as something TweetNacl-like, and then was
adjusted to be useful here. It's not very beautiful, but it is quite
short and compact, which is what we're going for.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[ restructure, add missing exception, add comments, fixup CPU model ]
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220922153820.221811-1-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add stfle 197 (processor-activity-instrumentation extension 1) to the
gen16 default model and fence it off for 7.1 and older.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220727135120.12784-1-borntraeger@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
All calls to virtio_bus_reset are preceded by virtio_bus_stop_ioeventfd,
move the call in virtio_bus_reset: that makes sense and clarifies
that the vdc->reset function is called with ioeventfd already stopped.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Call virtio_bus_reset instead of virtio_reset, so that the function
need not receive the VirtIODevice.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
module_kconfig is a new directive that should be used with module_obj
whenever that module depends on the Kconfig to be enabled.
When the module is enabled in Kconfig we are sure that its dependencies
will be enabled as well, thus the module will be loaded without any
problem.
The correct way to use module_kconfig is by passing the Kconfig option
to module_kconfig (or the *config-devices.mak without CONFIG_).
Signed-off-by: Jose R. Ziviani <jziviani@suse.de>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <165369002370.5857.12150544416563557322.stgit@work>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The machine name already contains the words "ccw" and "virtio", so
using "VirtIO-ccw" in the description likely does not really help
the average user to get an idea what this machine type is about.
Thus let's switch to "Virtual s390x machine" now, since "virtual
machine" should be a familiar term, and "s390x" signals that this
is about 64-bit guests (unlike S390 which could mean that it is
31-bit only).
Also expand "v" to "version", since this makes it easier to use
this macro also with non-numeric machine names in downstream.
Message-Id: <20220506065026.513590-1-thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As part of converting -boot to a property with a QAPI type, define
the struct and use it throughout QEMU to access boot configuration.
machine_boot_parse takes care of doing the QemuOpts->QAPI conversion by
hand, for now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220414165300.555321-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[ dh: take care of compat machines ]
Signed-off-by: David Miller <dmiller423@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-13-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Remove unecessary use of #ifdef CONFIG_VHOST_SCSI, instead just use a
separate file and a separate rule in meson.build.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not make assumptions on the parent type of the SCSIDevice, instead
use object_dynamic_cast all the way up to the CcwDevice. This is cleaner
because there is no guarantee that the bus is on a virtio-scsi device;
that is only the case for the default configuration of QEMU's s390x
target.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
TCG implements everything we need to run basic z15 OS+software
Signed-off-by: David Miller <dmiller423@gmail.com>
Message-Id: <20220223223117.66660-3-dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
More than 1k of TypeInfo instances are already marked as const. Mark the
remaining ones, too.
This commit was created with:
git grep -z -l 'static TypeInfo' -- '*.c' | \
xargs -0 sed -i 's/static TypeInfo/static const TypeInfo/'
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Message-id: 20220117145805.173070-2-shentey@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
softmmu/rtc.c defines two public functions: qemu_get_timedate() and
qemu_timedate_diff(). Currently we keep the prototypes for these in
qemu-common.h, but most files don't need them. Move them to their
own header, a new include/sysemu/rtc.h.
Since the C files using these two functions did not need to include
qemu-common.h for any other reason, we can remove those include lines
when we add the include of the new rtc.h.
The license for the .h file follows that of the softmmu/rtc.c
where both the functions are defined.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
In the past s390 used a fixed command line length of 896 bytes. This has changed
with the Linux commit 5ecb2da660ab ("s390: support command lines longer than 896
bytes"). There is now a parm area indicating the maximum command line size. This
parm area has always been initialized to zero, so with older kernels this field
would read zero and we must then assume that only 896 bytes are available.
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Viktor Mihajlovski <mihajlov@de.ibm.com>
Message-Id: <20211122112909.18138-1-mhartmay@linux.ibm.com>
[thuth: Cosmetic fixes, and use PRIu64 instead of %lu]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add 7.0 machine types for arm/i440fx/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211217143948.289995-1-cohuck@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The DTSM is a mask that specifies which I/O Address Translation designation
types are supported. Today QEMU only supports DT=1.
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-5-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We may have gotten a measurement update interval from the underlying host
via vfio -- Use it to set the interval via which we update the function
measurement block.
Fixes: 28dc86a072 ("s390x/pci: use a PCI Group structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-4-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Instead use the values from clp info, they will either be the hard-coded
values or what came from the host driver via vfio.
Fixes: 9670ee7527 ("s390x/pci: use a PCI Function structure")
Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Message-Id: <20211203142706.427279-3-mjrosato@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
They're actually more commonly used than the helper without _under_bus, because
most callers do have the pci bus on hand. After exporting we can switch a lot
of the call sites to use these two helpers.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20211028043129.38871-3-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Check if the provided kernel command line exceeds the maximum size of the s390x
Linux kernel command line size, which is 896 bytes.
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Message-Id: <20211006092631.20732-1-mhartmay@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[thuth: Adjusted format specifier for size_t]
Signed-off-by: Thomas Huth <thuth@redhat.com>
