... and also call it for CONFIG_USER_ONLY. This function probably will
also need some refactoring in regards to probing, however, we'll have to
come back to that later, once cleaning up the other mem helpers.
The alignment check always makes sure that the write access falls into a
single page.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190826075112.25637-8-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Factor it out into common code. Similar to the !CONFIG_USER_ONLY variant,
let's not allow to cross page boundaries.
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20190826075112.25637-4-david@redhat.com>
[rth: Move cpu & cc variables inside if block.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Hm... how did that "-" slip in (-TAGRET_PAGE_SIZE would be correct). This
currently makes us exceed one page in a single probe_write() call,
essentially leaving some memory unchecked.
Fixes: c5a7392cfb ("s390x/tcg: Provide probe_write_access helper")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190826075112.25637-3-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
If I'm not completely wrong, we are dealing with guest addresses here
and not with host addresses. Use the right check.
Fixes: c5a7392cfb ("s390x/tcg: Provide probe_write_access helper")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190826075112.25637-2-david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Preparation for collapsing the two byte swaps, adjust_endianness and
handle_bswap, along the I/O path.
Target dependant attributes are conditionalized upon NEED_CPU_H.
Signed-off-by: Tony Nguyen <tony.nguyen@bt.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <81d9cd7d7f5aaadfa772d6c48ecee834e9cf7882.1566466906.git.tony.nguyen@bt.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Factor it out, add a comment how it all works, and also use it in the
REAL MMU.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Any access sets the reference bit. In case we have a read-fault, we
should not allow writes to the TLB entry if the change bit was not
already set.
This is a preparation for proper storage-key reference/change bit handling
in TCG and a fix for KVM whereby read accesses would set the change
bit (old KVM versions without the ioctl to carry out the translation).
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Whenever we modify a storage key, we should flush the TLBs of all CPUs,
so the MMU fault handling code can properly consider the changed storage
key (to e.g., properly set the reference and change bit on the next
accesses).
These functions are barely used in modern Linux guests, so the performance
implications are neglectable for now.
This is a preparation for better reference and change bit handling for
TCG, which will require more MMU changes.
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-5-david@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Instructions are always fetched from primary address space, except when
in home address mode. Perform the selection directly in cpu_mmu_index().
get_mem_index() is only used to perform data access, instructions are
fetched via cpu_lduw_code(), which translates to cpu_mmu_index(env, true).
We don't care about restricting the access permissions of the TLB
entries anymore, as we no longer enter PRIMARY entries into the
SECONDARY MMU. Cleanup related code a bit.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190816084708.602-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's select the ASC before calling the function. This is a prepararion
to remove the ASC magic depending on the access mode from mmu_translate.
There is currently no way to distinguish if we have code or data access.
For now, we were using code access, because especially when debugging with
the gdbstub, we want to read and disassemble what we single-step.
Note: KVM guest can now no longer be crashed using qmp/hmp/gdbstub if they
happen to be in AR mode.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to trace the actual return value, not "0".
Fixes: 0f5f669147 ("s390x: Enable new s390-storage-keys device")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190816084708.602-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Wrong order of operands. The constant always comes last. Makes QEMU crash
reliably on specific git fetch invocations.
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190814151242.27199-1-david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Fixes: 5c4b0ab460 ("s390x/tcg: Implement VECTOR ELEMENT ROTATE AND INSERT UNDER MASK")
Cc: qemu-stable@nongnu.org
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709152053.16670-2-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
[Rebased onto merge commit 95a9457fd44; missed instances of qom/cpu.h
in comments replaced]
Generally the cpu and non-FP helper files just want to manipulate the
softfloat flags. For this they can just use the -helpers.h include
which brings in a minimal number of inline helpers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
We declare incomplete struct VMStateDescription in a couple of places
so we don't have to include migration/vmstate.h for the typedef.
That's fine with me. However, the next commit will drop
migration/vmstate.h from a massive number of compiles. Move the
typedef to qemu/typedefs.h now, so I don't have to insert struct in
front of VMStateDescription all over the place then.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-15-armbru@redhat.com>
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
The main culprit is hw/hw.h, which supposedly includes it for
convenience.
Include sysemu/reset.h only where it's needed. Touching it now
recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
The internal macro name VECTOR_BCD_ENH does not match the actual
description. Fix this.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190715142304.215018-4-borntraeger@de.ibm.com>
[CH: vxp->vxpdeh, as discussed]
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
David suggested to keep everything in sync as 4.1 is not yet released.
This patch fixes the name "vxbeh" into "vxpdeh".
To simplify the backports this patch will not change VECTOR_BCD_ENH as
this is just an internal name. That will be done by an extra patch that
does not need to be backported.
Suggested-by: David Hildenbrand <david@redhat.com>
Fixes: d05be57ddc ("s390: cpumodel: fix description for the new vector facility")
Fixes: 54d65de0b5 ("s390x/cpumodel: vector enhancements")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190715142304.215018-3-borntraeger@de.ibm.com>
[CH: vxp->vxpdeh, as discussed]
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
esort might not be available on all models.
Fixes: caef62430f ("s390x/cpumodel: add gen15 defintions")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190715142304.215018-2-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
...so that the compiler properly recognizes it.
Reported-by: Stefan Weil <sw@weilnetz.de>
Fixes: f180da83c0 ("s390x/tcg: Implement VECTOR LOAD LOGICAL ELEMENT AND ZERO")
Message-Id: <20190708125433.16927-3-cohuck@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The new facility is called "Vector-Packed-Decimal-Enhancement Facility"
and not "Vector BCD enhancements facility 1". As the shortname might
have already found its way into some backports, let's keep vxbeh.
Fixes: 54d65de0b5 ("s390x/cpumodel: vector enhancements")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20190708150931.93448-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's add support for the AP-Queue interruption facility to the CPU
model.
The S390_FEAT_AP_QUEUE_INTERRUPT_CONTROL, CPU facility indicates
whether the PQAP instruction with the AQIC command is available
to the guest.
This feature will be enabled only if the AP instructions are
available on the linux host and AQIC facility is installed on
the host.
This feature must be turned on from userspace to intercept AP
instructions on the KVM guest. The QEMU command line to turn
this feature on looks something like this:
qemu-system-s390x ... -cpu xxx,apqi=on ...
or
... -cpu host
Right now AP pass-through devices do not support migration,
which means that we do not have to take care of migrating
the interrupt data:
virsh migrate apguest --live qemu+ssh://root@target.lan/system
error: Requested operation is not valid: domain has assigned non-USB host devices
Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[rebase to newest qemu and fixup description]
Message-Id: <20190705153249.12525-1-borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The global smp variables in s390x are replaced with smp machine properties.
A local variable of the same name would be introduced in the declaration
phase if it's used widely in the context OR replace it on the spot if it's
only used once. No semantic changes.
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20190518205428.90532-7-like.xu@linux.intel.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
[ehabkost: fix build failure at VCPU_IRQ_BUF_SIZE]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
fixup! hw/s390x: Replace global smp variables with machine smp properties
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Move commands query-cpu-definitions, query-cpu-model-baseline,
query-cpu-model-comparison, and query-cpu-model-expansion with their
types from target.json to machine-target.json. Also move types
CpuModelInfo, CpuModelExpansionType, and CpuModelCompareResult from
misc.json there. Add machine-target.json to MAINTAINERS section
"Machine core".
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-13-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Commit message typo fixed]
Move commands cpu-add, query-cpus, query-cpus-fast,
query-current-machine, query-hotpluggable-cpus, query-machines,
query-memdev, and set-numa-node with their types from misc.json to new
machine.json. Also move types X86CPURegister32 and
X86CPUFeatureWordInfo. Add machine.json to MAINTAINERS section
"Machine core".
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-9-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
definitions.
-----BEGIN PGP SIGNATURE-----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=Bcc2
-----END PGP SIGNATURE-----
Merge tag 's390x-tcg-2019-06-21' into s390-next-staging
One fix for a tcg test case and two cleanups/refactorings of cpu feature
definitions.
# gpg: Signature made Fri 21 Jun 2019 03:37:37 PM CEST
# gpg: using RSA key 1BD9CAAD735C4C3A460DFCCA4DDE10F700FF835A
# gpg: issuer "david@redhat.com"
# gpg: Good signature from "David Hildenbrand <david@redhat.com>" [full]
# gpg: aka "David Hildenbrand <davidhildenbrand@gmail.com>" [full]
* tag 's390x-tcg-2019-06-21':
s390x/cpumodel: Prepend KDSA features with "KDSA"
s390x/cpumodel: Rework CPU feature definition
tests/tcg/s390x: Fix alignment of csst parameter list
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's handle it just like for other crypto features.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's define features at a single spot and make it less error prone to
define new features.
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Simiar to how kvm_init_vcpu() calls kvm_arch_init_vcpu() to perform
arch-dependent initialisation, introduce kvm_arch_destroy_vcpu()
to be called from kvm_destroy_vcpu() to perform arch-dependent
destruction.
This was added because some architectures (Such as i386)
currently do not free memory that it have allocated in
kvm_arch_init_vcpu().
Suggested-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Maran Wilson <maran.wilson@oracle.com>
Signed-off-by: Liran Alon <liran.alon@oracle.com>
Message-Id: <20190619162140.133674-3-liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Other accelerators have their own headers: sysemu/hax.h, sysemu/hvf.h,
sysemu/kvm.h, sysemu/whpx.h. Only tcg_enabled() & friends sit in
qemu-common.h. This necessitates inclusion of qemu-common.h into
headers, which is against the rules spelled out in qemu-common.h's
file comment.
Move tcg_enabled() & friends into their own header sysemu/tcg.h, and
adjust #include directives.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-2-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[Rebased with conflicts resolved automatically, except for
accel/tcg/tcg-all.c]
This macro is now always empty, so remove it. This leaves the
entire contents of CPUArchState under the control of the guest
architecture.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Nothing in there so far, but all of the plumbing done
within the target ArchCPU state.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Consolidate some boilerplate from foo_cpu_initfn.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have ArchCPU, we can define this generically,
in the one place that needs it.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Cleanup in the boilerplate that each target must define.
Replace s390_env_get_cpu with env_archcpu. The combination
CPU(s390_env_get_cpu) should have used ENV_GET_CPU to begin;
use env_cpu now.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Now that we have both ArchCPU and CPUArchState, we can define
this generically instead of via macro in each target's cpu.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, do this just before including exec/cpu-all.h.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For all targets, into this new file move TARGET_LONG_BITS,
TARGET_PAGE_BITS, TARGET_PHYS_ADDR_SPACE_BITS,
TARGET_VIRT_ADDR_SPACE_BITS, and NB_MMU_MODES.
Include this new file from exec/cpu-defs.h.
This now removes the somewhat odd requirement that target/arch/cpu.h
defines TARGET_LONG_BITS before including exec/cpu-defs.h, so push the
bulk of the includes within target/arch/cpu.h to the top.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This replaces the target-specific implementations for VSEL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
We don't care about the other two missing base features:
- S390_FEAT_DFP_PACKED_CONVERSION
- S390_FEAT_GROUP_GEN13_PTFF
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Let's add it to the max model, so we can enable it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Once we unlock S390_FEAT_VECTOR for TCG, we want linux-user to be
able to make use of it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: David Hildenbrand <david@redhat.com>
