Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-7-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than passing an opcode to a helper, fully decode the
operation at translate time. Use clear_tail_16 to zap the
balance of the SVE register with the AdvSIMD write.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Do not yet convert the helpers to loop over opr_sz, but the
descriptor allows the vector tail to be cleared. Which fixes
an existing bug vs SVE.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-4-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this conversion, we will be able to use the same helpers
with sve. This also fixes a bug in which we failed to clear
the high bits of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With this conversion, we will be able to use the same helpers
with sve. In particular, pass 3 vector parameters for the
3-operand operations; for advsimd the destination register
is also an input.
This also fixes a bug in which we failed to clear the high bits
of the SVE register after an AdvSIMD operation.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200514212831.31248-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We usually use '_do_' for internal functions. Rename
memory_region_do_writeback() as memory_region_writeback().
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200508062456.23344-2-philmd@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ibex is a small and efficient, 32-bit, in-order RISC-V core with
a 2-stage pipeline that implements the RV32IMC instruction set
architecture.
For more details on lowRISC see here:
https://github.com/lowRISC/ibex
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: LIU Zhiwei <zhiwei_liu@c-sky.com>
The PMP is enabled by default via the "pmp" property so there is no need
for us to set it in the init function. As all CPUs have PMP support just
remove the set_feature() call in the CPU init functions.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Previously if we didn't enable the MMU it would be enabled in the
realize() function anyway. Let's ensure that if we don't want the MMU we
disable it. We also don't need to enable the MMU as it will be enabled
in realize() by default.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
The reset vector is set in the init function don't set it again in
realize.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
The RISC-V ISA spec version 1.09.1 has been deprecated in QEMU since
4.1. It's not commonly used so let's remove support for it.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Signal handling support for NetBSD arm/aarch64
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAl7WgZkdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV8ZZwf9Flw0VHTBBzsZHPjL
JVOdJsz8pnQLRDxk9JUo7D40xehpN1oE5mFCV5aFNMSz929r7OB5WfUHsyNpbms/
aCDz2ADRscBZ4xEZY9cxUYiNzq4fb3Hez64ibGbRm3uHU1C2pPNDRlFpL9aFQMCE
elhn54hwOAZUZAAKszepClHGglPffijY5QU5VX6Gq6nmqEmCBlA8lkxMtaV/NRnS
QfskDF4KvglGqGDCcKI2tfotu5Y9k3R4yh7Nzc2JnotbHk4WrNbhBl6r9KcdXddi
uQng4J0zhBa1Kq4ENdpKgAqN/ZNVEbsFzev5aY77UD76cnxqbQQ7hfXl2gAORp6m
Vy5lVw==
=nRee
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20200602' into staging
Vector rotate support
Signal handling support for NetBSD arm/aarch64
# gpg: Signature made Tue 02 Jun 2020 17:43:05 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20200602:
accel/tcg: Provide a NetBSD specific aarch64 cpu_signal_handler
accel/tcg: Adjust cpu_signal_handler for NetBSD/arm
tcg: Improve move ops in liveness_pass_2
target/s390x: Use tcg_gen_gvec_rotl{i,s,v}
target/ppc: Use tcg_gen_gvec_rotlv
tcg/ppc: Implement INDEX_op_rot[lr]v_vec
tcg/aarch64: Implement INDEX_op_rotl{i,v}_vec
tcg/i386: Implement INDEX_op_rotl{i,s,v}_vec
tcg: Implement gvec support for rotate by scalar
tcg: Remove expansion to shift by vector from do_shifts
tcg: Implement gvec support for rotate by vector
tcg: Implement gvec support for rotate by immediate
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Merge VERLL and VERLLV into op_vesv and op_ves, alongside
all of the other vector shift operations.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
this also removes tricore_cpu_get_phys_page_attrs_debug() as it was a
temporary fix from b190f477e2.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20200529072148.284037-5-kbastian@mail.uni-paderborn.de>
this is needed for remote gdb connections.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20200529072148.284037-4-kbastian@mail.uni-paderborn.de>
this allows us to remove the references to env from ctx. This also fixes
a segfault that was due to the unititalized ctx->env ptr.
Reported-by: Andreas Konopik <andreas.konopik@fau.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20200529072148.284037-3-kbastian@mail.uni-paderborn.de>
EXCP_DEBUG is the only user. If we encounter a jump in tricore-gdb it's
target was overwritten by generate_qemu_excp() and we would never leave.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20200529072148.284037-2-kbastian@mail.uni-paderborn.de>
Traditionally, MIPS use 4KB page size, but Loongson prefer 16KB page
size in system emulator. So, let's define TARGET_PAGE_BITS_VARY and
TARGET_PAGE_BITS_MIN to support variable page size.
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Message-Id: <1586337380-25217-1-git-send-email-chenhc@lemote.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
x86_cpu_load_model() is wrong that way. Harmless, because its @errp
is always &error_abort. To fix, cut out the @errp middleman.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200505101908.6207-11-armbru@redhat.com>
Commit e47970f51d "s390x/cpumodel: Fix query-cpu-model-FOO error API
violations" neglected to change visit_check_struct()'s Error **
argument along with the others. If visit_check_struct() failed, we'd
take the success path. Fortunately, it can't fail here:
qobject_input_check_struct() checks we consumed the whole dictionary,
and to get here, we did. Fix it anyway.
Cc: David Hildenbrand <david@redhat.com>
Cc: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20200505101908.6207-4-armbru@redhat.com>
The penultimate argument of function ppc_radix64_partition_scoped_xlate()
has the bool type.
Fixes: d04ea940c5 "target/ppc: Add support for Radix partition-scoped translation"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <159051003729.407106.10610703877543955831.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
gdbstub shouldn't silently change guest visible state when doing address
translation. Since the R/C bits can only be updated when handling a MMU
fault, let's reuse the cause_excp flag and rename it to guest_visible.
While here drop a not very useful comment.
This was found while reading the code. I could verify that this affects
both powernv and pseries, but I failed to observe any actual bug.
Fixes: d04ea940c5 "target/ppc: Add support for Radix partition-scoped translation"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941063899.240484.2778628492106387793.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last two arguments have the bool type. Also, we shouldn't raise an
exception when using gdbstub.
This was found while reading the code. Since it only affects the powernv
machine, I didn't dig further to find an actual bug.
Fixes: d04ea940c5 "target/ppc: Add support for Radix partition-scoped translation"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941063281.240484.9114539141307005992.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As per CODING_STYLE.
Fixes: d04ea940c5 "target/ppc: Add support for Radix partition-scoped translation"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941062665.240484.2663106458734800894.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
It is the job of the ppc_radix64_get_fully_qualified_addr() function
which is called at the beginning of ppc_radix64_xlate() to set both
lpid *and* pid. It doesn't buy us anything to initialize them first.
Worse, a bug in ppc_radix64_get_fully_qualified_addr(), eg. failing to
set either lpid or pid, would be undetectable by static analysis tools
like coverity.
Some recent versions of gcc (eg. gcc-9.3.1-2.fc30) may still think
that lpid or pid is used uninitialized though, so this also adds
default cases in the switch statements to make it clear this cannot
happen.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941062048.240484.9693581559252337111.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This doesn't require write access to the CPU registers.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941061434.240484.10700096396035994133.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This doesn't require write access to the CPU structure.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158941060817.240484.14621015211317485106.stgit@bahia.lan>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
On reboot, all memory that was previously added using object_add and
device_add is placed in this DIMM area.
The new SPAPR_LMB_FLAGS_HOTREMOVABLE flag helps Linux to put this memory in
the correct memory zone, so no unmovable allocations are made there,
allowing the object to be easily hot-removed by device_del and
object_del.
This new flag was accepted in Power Architecture documentation.
Signed-off-by: Leonardo Bras <leobras.c@gmail.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Message-Id: <20200511200201.58537-1-leobras.c@gmail.com>
[dwg: Fixed syntax error spotted by Cédric Le Goater]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
POWER9 adds scv and rfscv instructions and the system call vectored
interrupt. Linux does not support this instruction yet but it has
been tested with a modified kernel that runs on real hardware.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20200507115328.789175-1-npiggin@gmail.com>
[dwg: Corrected an overlong line]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Some tabs crept in with a recent change.
Fixes: 6dc6b55791 "target/ppc: Improve syscall exception logging"
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <158886788307.1560068.14096740175576278978.stgit@bahia.lan>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Using the MSR instruction to write to CPSR.E is deprecated, but it is
required to work from any mode including unprivileged code. We were
incorrectly forbidding usermode code from writing it because
CPSR_USER did not include the CPSR_E bit.
We use CPSR_USER in only three places:
* as the mask of what to allow userspace MSR to write to CPSR
* when deciding what bits a linux-user signal-return should be
able to write from the sigcontext structure
* in target_user_copy_regs() when we set up the initial
registers for the linux-user process
In the first two cases not being able to update CPSR.E is a bug, and
in the third case it doesn't matter because CPSR.E is always 0 there.
So we can fix both bugs by adding CPSR_E to CPSR_USER.
Because the cpsr_write() in restore_sigcontext() is now changing
a CPSR bit which is cached in hflags, we need to add an
arm_rebuild_hflags() call there; the callsite in
target_user_copy_regs() was already rebuilding hflags for other
reasons.
(The recommended way to change CPSR.E is to use the 'SETEND'
instruction, which we do correctly allow from usermode code.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200518142801.20503-1-peter.maydell@linaro.org
Do not explicitly store zero to the NEON high part
when we can pass !is_q to clear_vec_high.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200519212453.28494-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 8-byte store for the end a !is_q operation can be
merged with the other stores. Use a no-op vector move
to trigger the expand_clr portion of tcg_gen_gvec_mov.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200519212453.28494-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The GEN_NEON_INTEGER_OP macro is no longer used; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Replace the float64 compare specializations with inline functions
that call the standard float64_compare{,_quiet} functions.
Use bool as the return type.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give the previously unnamed enum a typedef name. Use it in the
prototypes of compare functions. Use it to hold the results
of the compare functions.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Give the previously unnamed enum a typedef name. Use the packed
attribute so that we do not affect the layout of the float_status
struct. Use it in the prototypes of relevant functions.
Adjust switch statements as necessary to avoid compiler warnings.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have had this on the to-do list for quite some time.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We cannot at present limit a 64-bit guest to a virtual address
space smaller than the host. It will mostly work to ignore this
limitation, except if the guest uses high bits of the address
space for tags. But it will certainly work better, as presently
we can wind up failing to allocate the guest stack.
Widen our user-only page tree to the host or abi pointer width.
Remove the workaround for this problem from target/alpha.
Always validate guest addresses vs reserved_va, as there we
control allocation ourselves.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200513175134.19619-7-alex.bennee@linaro.org>
The CPU() macro is defined as:
#define CPU(obj) ((CPUState *)(obj))
which expands to:
((CPUState *)object_dynamic_cast_assert((Object *)(obj), (name),
__FILE__, __LINE__, __func__))
This assertion can only fail when @obj points to something other
than its stated type, i.e. when we're in undefined behavior country.
Remove the unnecessary CPU() casts when we already know the pointer
is of CPUState type.
Patch created mechanically using spatch with this script:
@@
typedef CPUState;
CPUState *s;
@@
- CPU(s)
+ s
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-2-f4bug@amsat.org>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
Several functions can't fail anymore: ich9_pm_add_properties(),
device_add_bootindex_property(), ppc_compat_add_property(),
spapr_caps_add_properties(), PropertyInfo.create(). Drop their @errp
parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-16-armbru@redhat.com>
