Now that we're always sparcv9, we can not bother using Bicc for
32-bit branches and BPcc for 64-bit branches and instead always
use BPcc.
New interfaces allow less direct use of tcg_out32 and raw numbers
inside the qemu_ld/st routines.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
We must care not to clobber the high parts before we consume them.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The set of comparisons that can immediately use the carry are LTU/GEU,
not LTU/LEU. Don't swap operands when we need a temp register; the
register may already be in use from setcond2.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The datalo variable is still live in the miss path. Use another
when reconstructing the full data value.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Like brcond2, use tcg_high_cond. Use movcc instead of branches.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Avoid speculatively computing flags before every potentially trapping
operation and instead do the flags computation when a trap actually
occurs. This gives approximately 30% speedup in emulation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Now that save_state never ends a BB, we don't need to copy
values into local temps around it.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* pmaydell/arm-devs.for-upstream:
arm_gic: Rename gic_state to GICState
zynq_slcr: Fixed ResetValues enum
versatilepb: add gpio pl061 support
hw/ds1338: Implement state save/restore
hw/ds1338: Remove 'now' field from state struct
hw/ds1338: Recapture current time when register pointer wraps around
hw/ds1338: Fix mishandling of register pointer
hw/arm_gic.c: Fix improper DPRINTF output.
cadence_ttc: Fix 'clear on read' behavior
* stefanha/trivial-patches:
vnc: fix "info vnc" with "-vnc ..., reverse=on"
sheepdog: use bool for boolean variables
configure: Tidy up remnants of non-64-bit physaddrs
* kraxel/usb.67:
uhci: Raise interrupt when requested even for non active tds
usb-redir: Don't make migration fail in none seamless case
usb-redir: Change usbredir_open_chardev into usbredir_create_parser
* mdroth/qga-pull-10-9-12:
qemu-ga: ga_open_pidfile(): add new line to pidfile
qemu-ga: use state dir from CONFIG_QEMU_LOCALSTATEDIR
configure: add --localstatedir
* stefanha/net:
net: consolidate NetClientState header files into one
virtio-net: update nc.link_down in virtio_net_load()
e1000: update nc.link_down in e1000_post_load()
rtl8139: implement 8139cp link status
* spice/spice.v61:
qxl: set default revision to 4
spice: raise requirement to 0.12
hw/qxl: qxl_dirty_surfaces: use uintptr_t
hw/qxl: fix condition for exiting guest_bug
hw/qxl: exit on failure to register qxl interface
qxl: fix range check for rev3 io commands.
qxl/update_area_io: cleanup invalid parameters handling
qxl: always update displaysurface on resize
pread64 and pwrite64 pass 64bit parameters which for some architectures need
to be aligned to special argument pairs, creating a gap argument.
Handle this special case the same way we handle it in other places of the code.
Reported-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Alex Barcelo <abarcelo@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The SysV PPC32 ABI dictates that long long (64bit) parameters are pass in odd/even
register pairs. Because unlike ARM and MIPS we start at an odd register number,
we can reuse the same aligning code that ARM and MIPS use.
Clarified inline comment that it is SysV ABI that requires long long aligned
parameters - Riku
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
GUEST_BASE support is now supported by all TCG backends, and is
now mandatory. Drop the now-pointless TCG_TARGET_HAS_GUEST_BASE
define (set by every backend) and the error if it is unset.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
All TCG hosts now support guest-base functionality, so we can
remove the setting of host_guest_base to 'yes' in every arm
of the case "$cpu" statement, and simply set guest_base to
default to 'yes'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If the attempt to load the guest executable fails, print the
error message as a string, not a number. This requires us to
fix a couple of places in loader_exec() where we were returning
-1 instead of a valid negative errno.
The change allows us to drop the "Unknown binary format" message
because the strerror-enhanced message is now a more self-explanatory
"Error while loading $guest-binary: Exec format error".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Compare signal numbers in the proper domain.
Convert all of the fields for SIGIO and SIGCHLD.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Validate count between 0 and IOV_MAX. Limit total length of
operation in the same way the kernel does.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When reading our faked /proc/self/maps from a secondary thread,
we get an invalid stack entry. This is because ts->stack_base is not
initialized in non-primary threads.
However, ts->info is, and the stack layout information we're looking
for is there too. So let's use that one instead!
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The statfs syscall should always memset(0) its full struct extent before
writing to it. Newer versions of the syscall use one of the reserved fields
for flags, which would otherwise get stale values from uncleaned memory.
This fixes libarchive for me, which got confused about the return value of
pathconf("/", _PC_REC_XFER_ALIGN) otherwise, as it some times gave old pointers
as return value.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Rename the gic_state struct to match QEMU's coding style conventions
for structure names, since the impending KVM-for-ARM patches will
create another subclass of it. This patch was created using:
sed -i 's/gic_state/GICState/g' hw/arm_gic.c hw/arm_gic_common.c \
hw/arm_gic_internal.h hw/armv7m_nvic.c
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There is a gap in the reset region of the address space at offset 0x208. This
throws out all these enum values by one when translating them to address offsets.
Fixed by putting the corresponding gap in the enum as well.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement state save/restore for the DS1338. This requires
the usual minor adjustment of types in the state struct to
get fixed-width ones with vmstate macros.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'struct tm now' field in the state structure is in fact only
ever used as a temporary (the actual RTC state is held in 'offset').
Remove it from the state structure in favour of using local variables
to avoid confusion about whether it needs to be saved on migration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The DS1338 datasheet documents that the current time is captured into
the secondary registers when the register pointer wraps round to zero
as well as at a START condition. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Correct several deficiencies in the handling of the register pointer:
* it should wrap around after 0x3f, not 0xff
* guard against the caller handing us an out of range pointer
(on h/w this can never happen, because only a 7 bit value is
transferred over the I2C bus)
* there was confusion over whether nvram[] holds only the 56 bytes
of guest-accessible NVRAM, or also the secondary registers
which hold the value of the clock captured at the start of a
multibyte read. Correct to consistently be the latter, by fixing
the array size and the offset used for NVRAM writes.
* ds1338_send was attempting to use 'data' as both the data and
the register offset simultaneously, which meant that writes to
any register were broken; fix to use the register pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
s->cpu_enabled is an array, so s->cpu_enabled ? "En" : "Dis" returns
"En" always. We should use s->cpu_enabled[cpu] here.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A missing call to qemu_set_irq() when reading the IRQ register
required SW to write to the IRQ register to acknowledge an
interrupt. With this patch the behavior is fixed:
- Reading the interrupt register clears it and updates the timers
interrupt status
- Writes to the interrupt register are ignored
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When reverse connection is in use, there is no active VNC server
socket. Because of this, getsockopt(-1, ...) is attempted and
the following error is emitted:
$ socat TCP-LISTEN:5900,reuseaddr TCP-LISTEN:5901,reuseaddr &
$ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:5900,reverse -monitor stdio
QEMU 1.2.50 monitor - type 'help' for more information
(qemu) info vnc
An undefined error has occurred
Because however the host, family, service and auth fields are
optional, we can just exit if there is no active server socket.
$ x86_64-softmmu/qemu-system-x86_64 -vnc localhost:5900,reverse -monitor stdio
QEMU 1.2.50 monitor - type 'help' for more information
(qemu) info vnc
Server:
Client:
address: 127.0.0.1:5900
x509_dname: none
username: none
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Tidy up some remnants of code to support non-64-bit physaddrs
which were accidentally omitted from commit 4be403c8.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
According to the spec we must raise an interrupt when one is requested
even for non active tds.
Linux depends on this, for bulk transfers it runs an inactivity timer
to work around a bug in early uhci revisions, when we take longer then
200 ms to process a packet, this timer goes of, and as part of the
handling Linux then unlinks the qh, and relinks it after the frindex
has increased by atleast 1, the problem is Linux only checks for the
frindex increases on an interrupt, and we don't send that, causing
the qh to go inactive for more then 32 frames, at which point we
consider the packet cancelled.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead simple disconnect the device like host redirection does on
migration.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Added helper function to automatically connect SPI slaves based on the QOM child
nodes of a device. A SSI master device can call this routine to automatically
hook-up all child nodes to its SPI bus.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
