Step 3 from bios-tables-test.c documented procedure.
Signed-off-by: Miguel Luis <miguel.luis@oracle.com>
Message-Id: <20221011181730.10885-2-miguel.luis@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Ani Sinha <ani@anisinha.ca>
Since commit f1018ea0a3 ("tests: avoid DOS line endings in PSK file"),
the bug of the helper test_tls_psk_init_common() that caused TLS PSK
tests to fail on Windows was fixed. Let's enable these tests on win32.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221101035021.729669-1-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20221105115525.623059-1-sw@weilnetz.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
There were still some constants defined in e1000_regs.h.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221105053010.38037-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Nemonics E1000_STATUS_LAN_INIT_DONE and E1000_STATUS_ASDV_1000 have
the same value, and E1000_STATUS_ASDV_1000 should be used here because
E1000_STATUS_ASDV_1000 represents the auto-detected speed tested here
while E1000_STATUS_LAN_INIT_DONE is a value used for a different purpose
with a variant of e1000e family different from the one implemented in
QEMU.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103083425.100590-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The register definitions in tests/qtest/e1000e-test.c had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103095416.110162-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The later device status check depends on E1000_STATUS_LU, which is
enabled by E1000_CTRL_SLU. Though E1000_STATUS_LU is not implemented
and E1000_STATUS_LU is always available in the current implementation,
be a bit nicer and set E1000_CTRL_SLU just in case the bit is
implemented in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103025451.27446-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is yet another minor cleanup to ease understanding and
future refactoring of the tests.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221103015017.19947-1-akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This avoids some compilers complaining about a potentially
un-initialised [src|dst]argv. In retrospect using GString was overkill
for what we are constructing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20221103102329.2581508-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Most of them were found and fixed using codespell.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20221030105944.311940-1-sw@weilnetz.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This introduces QEMU acpi/smbios biosbits avocado test which is run
from within the python virtual environment. When the bits tests are run, bits
binaries are downloaded from an external repo/location, bios bits iso is
regenerated containing the acpi/smbios bits tests that are maintained as a part
of the QEMU source under tests/avocado/acpi-bits/bits-test . When the VM is
spawned with the iso, it runs the tests in batch mode and the results are pushed
out from the VM to the test machine where they are analyzed by this script and
pass/fail results are reported.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20221021095108.104843-6-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This change adds initial biosbits config file that instructs biosbits to run
bios test suits in batch mode. Additionally acpi and smbios structures are also
dumped.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PSS tests in acpi test suite seems to be failing in biosbits. This is because
the test is unable to find PSS support in QEMU bios. Let us disable
them for now so that make check does not fail. We can fix the tests and
re-enable them later.
Example failure:
---- ACPI _PSS (Pstate) table conformance tests ----
[assert] _PSS must exist FAIL
\_SB_.CPUS.C000
No _PSS exists
Summary: 1 passed, 1 failed
---- ACPI _PSS (Pstate) runtime tests ----
[assert] _PSS must exist FAIL
\_SB_.CPUS.C000
No _PSS exists
Summary: 0 passed, 1 failed
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-4-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This is initial commit of cpuid, acpi and smbios python test scripts for
biosbits to execute. No change has been made to them from the original code
written by the biosbits author Josh Triplett. They are required to be installed
into the bits iso file and then run from within the virtual machine booted off
with biosbits iso.
The test scripts have a ".py2" extension in order to prevent avocado from
loading them. They are written in python 2.7 and are run from within bios bits.
There is no need for avocado to try to load them and call out errors on python3
specific syntaxes.
The original location of these tests are here:
https://github.com/biosbits/bits/blob/master/python/testacpi.pyhttps://github.com/biosbits/bits/blob/master/python/smbios.pyhttps://github.com/biosbits/bits/blob/master/python/testcpuid.py
For QEMU, we maintain a fork of the above repo here with numerious fixes:
https://gitlab.com/qemu-project/biosbits-bits
The acpi test for example is maintained here in the fork:
https://gitlab.com/qemu-project/biosbits-bits/-/raw/master/python/testacpi.py
Cc: Daniel P. Berrangé <berrange@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Maydell Peter <peter.maydell@linaro.org>
Cc: John Snow <jsnow@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alex Bennée <alex.bennee@linaro.org>
Cc: Igor Mammedov <imammedo@redhat.com>
Cc: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221021095108.104843-2-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add encoding interfaces for DER encoding:
1. support decoding of 'bit string', 'octet string', 'object id'
and 'context specific tag' for DER encoder.
2. implemented a simple DER encoder.
3. add more testsuits for DER encoder.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Message-Id: <20221008085030.70212-3-helei.sig11@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Robert Hoo <robert.hu@linux.intel.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Message-Id: <20220922122155.1326543-2-robert.hu@linux.intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
=6hXE
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu into staging
testing and plugin updates for 7.2:
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
# KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
# 814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
# dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
# KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
# PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
# 76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
# =6hXE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Nov 2022 09:49:39 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu: (31 commits)
tests/vm: use -o IdentitiesOnly=yes for ssh
tests/unit: cleanups for test-io-channel-command
contrib/plugins: protect execlog's last_exec expansion
contrib/plugins: enable debug on CONFIG_DEBUG_TCG
tests/tcg: include CONFIG_PLUGIN in config-host.mak
target/s390x: fake instruction loading when handling 'ex'
target/s390x: don't probe next pc for EXecuted insns
target/s390x: don't use ld_code2 to probe next pc
tests/tcg: re-enable threadcount for sh4
tests/tcg: re-enable linux-test for sh4
tests/avocado: disable sh4 rd2 tests on Gitlab
tests/avocado: raspi2_initrd: Wait for guest shutdown message before stopping
tests/avocado: set -machine none for userfwd and vnc tests
MAINTAINERS: fix-up for check-tcg Makefile changes
MAINTAINERS: add features_to_c.sh to gdbstub files
MAINTAINERS: add entries for the key build bits
hw/usb: dev-mtp: Use g_mkdir()
block/vvfat: Unify the mkdir() call
tcg: Avoid using hardcoded /tmp
semihosting/arm-compat-semi: Avoid using hardcoded /tmp
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test to detect races between munmap() and creating new threads.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20221028124227.2354792-3-iii@linux.ibm.com>
[rth: add more return insns]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When one has a lot of keys in ~/.ssh directory, the ssh command will
try all of them before the one specified on the command line, and this
may cause the remote ssh server to reject the connection due to too
many failed authentication attempts.
Fix by adding -o IdentitiesOnly=yes, which makes the ssh client
consider only the keys specified on the command line.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221027113026.2280863-1-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-31-alex.bennee@linaro.org>
This test is hanging under heavy load when the two socats race while
trying to create the socket. I've tried various approaches to avoid
the race but it seems "creat=0" won't stop socat trying to create a
pipe if it executes first. In the end I just use a small sleep which
seems to be reliable enough on the load situations I've tried.
While I was there I also properly created a tmpdir for the socket to
live in which is cleaned up at the end of the test.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Juan Quintela <quintela@redhat.com>
Message-Id: <20221027183637.2772968-30-alex.bennee@linaro.org>
This test was marked as broken due to bug #856 which was fixed by
ab419fd8a0 (target/sh4: Fix TB_FLAG_UNALIGN). Local testing shows this
is solid now so lets re-enable the test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20221027183637.2772968-23-alex.bennee@linaro.org>
This test was marked as broken due to bug #704 which was fixed by
aee14c77f4 (linux-user: Rewrite do_getdents, do_getdents64). Local
testing shows this is solid now so lets re-enable the test.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Message-Id: <20221027183637.2772968-22-alex.bennee@linaro.org>
Running repeated invocations on a number of test boxes show a fairly
high error rate:
$ retry.py -n 100 -c -- ./tests/venv/bin/avocado run tests/avocado/boot_linux_console.py:BootLinuxConsole.test_sh4_r2d
retry.py called with ['./tests/venv/bin/avocado', 'run', 'tests/avocado/boot_linux_console.py:BootLinuxConsole.test_sh4_r2d']
Results:
Run, Ret, Pass/Fail, Time, Total Pass, Total Run
...
Results summary:
0: 94 times (94.00%), avg time 2.254 (0.00 varience/0.04 deviation)
1: 3 times (3.00%), avg time 1.837 (0.02 varience/0.14 deviation)
8: 3 times (3.00%), avg time 91.288 (0.02 varience/0.15 deviation)
Examining the logs they fall into various categories of un-handled
unaligned access by user space and unexpected FPU usage by the kernel
which ultimately lead to the failure to reach the login prompt. This
could be bugs in the translator that only get hit occasionally or just
a flaky kernel - its hard to tell. To avoid these failures gating CI
lets skip on GitLab.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Magnus Damm <magnus.damm@gmail.com>
Message-Id: <20221027183637.2772968-21-alex.bennee@linaro.org>
The avocado test
tests/avocado/boot_linux_console.py:BootLinuxConsole.test_arm_raspi2_initrd
finishes with
exec_command(self, 'halt')
# Wait for VM to shut down gracefully
self.vm.wait()
In theory this should be fine. In practice it runs into two bugs:
* when the test calls self.vm.wait() Avocado closes the socket
connection to the guest serial console immediately, so the
avocado logs don't have the last part of the guest output:
https://gitlab.com/qemu-project/qemu/-/issues/1265
* when the socket is closed, a bug in the QEMU socket chardev
means that it loses any data that the guest UART has not
yet consumed. This means that the guest doesn't always read
the full 'halt' command string, so the test intermittently
fails with a timeout:
https://gitlab.com/qemu-project/qemu/-/issues/1264
Work around both of these by waiting for the guest to print the
string that means it has completed the shutdown process. This fixes
a very long standing intermittent failure in this test.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/636
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221020102012.3015662-1-peter.maydell@linaro.org>
Message-Id: <20221027183637.2772968-20-alex.bennee@linaro.org>
These are exercising core QEMU features and don't actually run code.
Not specifying a machine will fail when avocado chooses the native
arch binary to run. Be explicit.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-19-alex.bennee@linaro.org>
More closely follow the default linker script for nios2.
This magically fixes a problem resolving .got relocs from
the toolchain's libgcc.a.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1258
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221024035341.2971123-1-richard.henderson@linaro.org>
Message-Id: <20221027183637.2772968-10-alex.bennee@linaro.org>
The nios2 code now plugs into the common semihosting code so we can
use the same redirect invocation as the other boards. There is however
a bug raised for the fact the tests don't seem to be completing
properly and silently passing anyway:
https://gitlab.com/qemu-project/qemu/-/issues/1258
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-9-alex.bennee@linaro.org>
debian-hexagon-cross contains two images, one to build the toolchain
used for building the Hexagon tests themselves, and one image to build
QEMU and run the tests.
This commit adds flex/bison to the final image that builds QEMU so that
it can also build idef-parser.
Note: This container is not built by the CI and needs to be rebuilt and
updated manually.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221014223642.147845-1-anjo@rev.ng>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-8-alex.bennee@linaro.org>
These are timing out on gitlab.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-7-alex.bennee@linaro.org>
Adds flex/bison to the debian-all-test-cross container which was missed
in the previous CI patch. These dependencies are required by the
idef-parser patchset for target/hexagon.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20221011173229.57909-1-anjo@rev.ng>
Message-Id: <20221027183637.2772968-4-alex.bennee@linaro.org>
While the test-build test happily run for mingw the test-mingw case
runs more of the packaging inline with what our CI does. It however
fails if we don't find both compilers and expects to be run on a
docker image with both.
Remove that distinction and make it work more like the other build
test scripts.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221027183637.2772968-3-alex.bennee@linaro.org>
We need an updated lcitool for this to deal with the weirdness
of a 32bit nsis tool for both 32 and 64 bit builds.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-10-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221028095659.48734-3-philmd@linaro.org>
[AJB: no longer triggers whitespace changes due to rebase]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Convert another two dockerfiles to lcitool and update.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-10-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221028095659.48734-4-philmd@linaro.org>
This helper is not Debian specific, rename it to cross_build().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220929114231.583801-10-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221028095659.48734-2-philmd@linaro.org>
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
-----BEGIN PGP SIGNATURE-----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=h0Ep
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu into staging
* Fix and test the VISTR instruction on s390x
* Some more small s390x fixes and maintainer updates
* Make sure to remove all temporary files from qtests
* OpenBSD VM test update to version 7.2
* Add sndio to FreeBSD tests
* More patches to enable the qtests on Windows
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNb1x8RHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXmcA//TCliiFkhprVxzIqy7zb9uz2Odu+sS4dT
# azUSlXvC14fECm/Rb/rd2VLqCu5x2er8CYauxKQ4VhRImzcDta4kvpt/HKIppN2t
# sqw5tipJL0DYcWBwYL1llvfutM26M+Oh0igwR8uV7b+W1FjojEZdcOr9IZ6E6V55
# wQCE5OHm0VCr61QeI5IBfZTsiPo+DFomUCpj7w66j6i0CVDvmpoe36tCmvGgrcpZ
# SP7ep7/Iq+dnGh2YnJyoUOPlXeeiBCxAygOVnIRXptDeniGoliCFn7ksLdKDQ9qY
# 69pSPR/W7mTZB/HkCRalAbYuYrI9Rcqxdu6c9vcyB8Pr0snQLTf8qThY+BJ2oC4w
# JSGgWVniAk5MmrDazwNRkSbgngYLYf+CcT1h5AANuU5Kt50Bdy9Y3TuL5YVmofEp
# N4bypV0ICImQyDECz76+i5/iJOcWiRyjMfLT6y00dspeuy983xHakrsHGD8xj0U/
# 3IVxnF9bDnUSVg6lFhYrgCB3dRG1TNPJoYQOM7raS5MAPRrDtIuSabwtyn84jo4+
# 9kZRPJBriMBHNsCjGVlJ9CATmaK1SKVAbRcabjgOKoIwhZTpAe6JalykREUJlTys
# hB2V//lWWYPaSpzwY+OkvxoOmJIziixEskOmx6hPcoxID5v/bqlR69W15aUlKuLq
# VWFb+/yMvaE=
# =h0Ep
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 28 Oct 2022 09:20:31 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-10-28' of https://gitlab.com/thuth/qemu: (21 commits)
tests/qtest: libqtest: Correct the timeout unit of blocking receive calls for win32
tests/qtest: libqos: Do not build virtio-9p unconditionally
tests/qtest: migration-test: Make sure QEMU process "to" exited after migration is canceled
tests/qtest: libqtest: Introduce qtest_wait_qemu()
tests/qtest: Use EXIT_FAILURE instead of magic number
tests/qtest: device-plug-test: Reverse the usage of double/single quotes
tests/qtest: Support libqtest to build and run on Windows
tests/qtest: Use send/recv for socket communication
accel/qtest: Support qtest accelerator for Windows
tests: Add sndio to the FreeBSD CI containers / VM
tests/vm: update openbsd to release 7.2
tests/qtest/libqos/e1000e: Use e1000_regs.h
tests/qtest/cxl-test: Remove temporary directories after testing
tests/qtest/tpm: Clean up remainders of swtpm
MAINTAINERS: target/s390x/: add Ilya as reviewer
tests/tcg/s390x: Add a test for the vistr instruction
target/s390x: Fix emulation of the VISTR instruction
tests/tcg/s390x: Test compiler flags only once, not every time
s390x/tod-kvm: don't save/restore the TOD in PV guests
s390x: step down as general arch maintainer
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Many LUKS header robustness checks
* Fix TLS PSK error reporting
* Enable LUKS creation on macOS
* Report useful errnos from seccomp
* I/O chanel Windows portability fix
-----BEGIN PGP SIGNATURE-----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=qrzm
-----END PGP SIGNATURE-----
Merge tag 'misc-next-pull-request' of https://gitlab.com/berrange/qemu into staging
pull: crypto and io queue
* Many LUKS header robustness checks
* Fix TLS PSK error reporting
* Enable LUKS creation on macOS
* Report useful errnos from seccomp
* I/O chanel Windows portability fix
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE2vOm/bJrYpEtDo4/vobrtBUQT98FAmNawAcACgkQvobrtBUQ
# T9/pWA/9FXE6kvkv9YQhb/h1rMALO1aLKqUG/jWKP/mzqqLpDKHxxPin/nw8RYff
# xyHt5mC7t1g7a8FFMlXxFHw1WE9o46j3tQg2IokWlX2ossYaZQx+BVv4s1zjTxcK
# KPVKWoEqN5sfa2T7gUGbfZ+dH9LSZ29DRT+GrO9YEvjdSg0yUKHXPetjw6iw5OVT
# GuI22xOVKbuCBf7PW/nvUe/6prxAfc7IavvAusrdkMFXymcys87q7ZCxGYEsDxyC
# vUkLdAoB9kcjwvmU+sZl9WhjasRQkUxW8zCToKea4TSS1fp5pgVL0TT4x7yq7ts4
# nqnaqiSTBfRda62lF64A9lM91K7hbDqPC33FkCNKWJGsQAYIFvdVJdqJsvZHUr1/
# 3KyHkXMsyzRfGnT7MHK+GpwcgvTupBP8ceiyYq28CLNAKXpXb6vmJIsIAdF3UaYi
# N320ogiU3iRmkqdbbbGTpBB40UQvQvdbmqKTTDmigLdpDL2TLzAqfpu1zepg+7xE
# wcXoPM9ZcRSwM7i9QyPMtjharCTeVR/QPlUN9agDGOlzNpUahIC5YrmCVKXNunnE
# M259Ytyb6ymaMrsHgshW1gJP3327N/lIOp5yLLHEzgLM1xAGOaDP83FsF8JA/Zsd
# f1he75N3KbDPYhgrdfFfitcO8F8zvhK3AqyqNDPCpJKVSeKKqFE=
# =qrzm
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 27 Oct 2022 13:29:43 EDT
# gpg: using RSA key DAF3A6FDB26B62912D0E8E3FBE86EBB415104FDF
# gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" [full]
# gpg: aka "Daniel P. Berrange <berrange@redhat.com>" [full]
# Primary key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF
* tag 'misc-next-pull-request' of https://gitlab.com/berrange/qemu:
crypto: add test cases for many malformed LUKS header scenarios
crypto: ensure LUKS tests run with GNUTLS crypto provider
crypto: quote algorithm names in error messages
crypto: split off helpers for converting LUKS header endianess
crypto: split LUKS header definitions off into file
crypto: check that LUKS PBKDF2 iterations count is non-zero
crypto: strengthen the check for key slots overlapping with LUKS header
crypto: validate that LUKS payload doesn't overlap with header
crypto: enforce that key material doesn't overlap with LUKS header
crypto: enforce that LUKS stripes is always a fixed value
crypto: sanity check that LUKS header strings are NUL-terminated
tests: avoid DOS line endings in PSK file
crypto: check for and report errors setting PSK credentials
scripts: check if .git exists before checking submodule status
seccomp: Get actual errno value from failed seccomp functions
io/channel-watch: Fix socket watch on Windows
io/channel-watch: Drop the unnecessary cast
io/channel-watch: Drop a superfluous '#ifdef WIN32'
util/qemu-sockets: Use g_get_tmp_dir() to get the directory for temporary files
crypto/luks: Support creating LUKS image on Darwin
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Some qtest cases don't get response from the QEMU executable under
test in time on Windows. It turns out that the socket receive call
got timeout before it receive the complete response.
The timeout value is supposed to be set to 50 seconds via the
setsockopt() call, but there is a difference among platforms.
The timeout unit of blocking receive calls is measured in
seconds on non-Windows platforms but milliseconds on Windows.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-10-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
At present the virtio-9p related codes are built into libqos
unconditionally. Change to build them conditionally by testing
the 'virtfs' config option.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-9-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Make sure QEMU process "to" exited before launching another target
for migration in the test_multifd_tcp_cancel case.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-8-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Introduce an API for qtest to wait for the QEMU process to terminate.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-7-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When migration fails, QEMU exits with a status code EXIT_FAILURE.
Change qtests to use the well-defined macro instead of magic number.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221028045736.679903-6-bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The usage of double/single quotes in test_q35_pci_unplug_json_request()
should be reversed to work on both win32 and non-win32 platforms:
- The value of -device parameter needs to be surrounded by "" as
Windows does not drop '' when passing it to QEMU which causes
QEMU command line option parser failure.
- The JSON key/value pairs need to be surrounded by '' to make the
JSON parser happy on Windows.
Fixes: a12f1a7e56 ("tests/x86: Add subtest with 'q35' machine type to device-plug-test")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-5-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
At present the libqtest codes were written to depend on several
POSIX APIs, including fork(), kill() and waitpid(). Unfortunately
these APIs are not available on Windows.
This commit implements the corresponding functionalities using
win32 native APIs. With this change, all qtest cases can build
successfully on a Windows host, and we can start qtest testing
on Windows now.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-4-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Socket communication in the libqtest and libqmp codes uses read()
and write() which work on any file descriptor on *nix, and sockets
in *nix are an example of a file descriptor.
However sockets on Windows do not use *nix-style file descriptors,
so read() and write() cannot be used on sockets on Windows.
Switch over to use send() and recv() instead which work on both
Windows and *nix.
Signed-off-by: Xuzhou Cheng <xuzhou.cheng@windriver.com>
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20221028045736.679903-3-bin.meng@windriver.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add sndio to the FreeBSD CI containers / VM
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <Y1f6dxjvD01DtXyG@humpty.home.comstyle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The register definitions in tests/qtest/libqos/e1000e.c had names
different from hw/net/e1000_regs.h, which made it hard to understand
what test codes corresponds to the implementation. Use
hw/net/e1000_regs.h from tests/qtest/libqos/e1000e.c to remove
these duplications.
E1000E_CTRL_EXT_TXLSFLOW is removed from E1000E_CTRL_EXT settings
because hw/net/e1000_regs.h does not have the definition and it is for
TCP segmentation offload, which does not matter for the implemented
tests.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20221013055245.28102-1-akihiko.odaki@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The cxl-test leaves some temporary directories behind. Let's
clean them up now!
Message-Id: <20221012091435.893570-1-thuth@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
After running "make check", there are remainders of the tpm
tests left in the /tmp directory, slowly filling it up.
Seems like "swtpm" leaves a ".lock" and a "tpm2-00.permall"
file behind, so that the g_rmdir() calls on the temporary
directories fail. Introduce a helper function to remove those
leftovers before doing the g_rmdir().
Message-Id: <20221012084334.794253-1-thuth@redhat.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test can be used to verify that the change in the previous
commit is indeed fixing the problem with the M3 vs. M4 field
mixup.
Message-Id: <20221012182755.1014853-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
No functional change intended.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20221025084952.2139888-11-eesposit@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bs->file and bs->backing are a kind of duplication of part of
bs->children. But very useful diplication, so let's not drop them at
all:)
We should manage bs->file and bs->backing in same place, where we
manage bs->children, to keep them in sync.
Moreover, generic io paths are unprepared to BdrvChild without a bs, so
it's double good to clear bs->file / bs->backing when we detach the
child.
Detach is simple: if we detach bs->file or bs->backing child, just
set corresponding field to NULL.
Attach is a bit more complicated. But we still can precisely detect
should we set one of bs->file / bs->backing or not:
- if role is BDRV_CHILD_COW, we definitely deal with bs->backing
- else, if role is BDRV_CHILD_FILTERED (it must be also
BDRV_CHILD_PRIMARY), it's a filtered child. Use
bs->drv->filtered_child_is_backing to chose the pointer field to
modify.
- else, if role is BDRV_CHILD_PRIMARY, we deal with bs->file
- in all other cases, it's neither bs->backing nor bs->file. It's some
other child and we shouldn't care
OK. This change brings one more good thing: we can (and should) get rid
of all indirect pointers in the block-graph-change transactions:
bdrv_attach_child_common() stores BdrvChild** into transaction to clear
it on abort.
bdrv_attach_child_common() has two callers: bdrv_attach_child_noperm()
just pass-through this feature, bdrv_root_attach_child() doesn't need
the feature.
Look at bdrv_attach_child_noperm() callers:
- bdrv_attach_child() doesn't need the feature
- bdrv_set_file_or_backing_noperm() uses the feature to manage
bs->file and bs->backing, we don't want it anymore
- bdrv_append() uses the feature to manage bs->backing, again we
don't want it anymore
So, we should drop this stuff! Great!
We could probably keep BdrvChild** argument to keep the int return
value, but it seems not worth the complexity.
Finally, we now set .file / .backing automatically in generic code and
want to restring setting them by hand outside of .attach/.detach.
So, this patch cleanups all remaining places where they were set.
To find such places I use:
git grep '\->file ='
git grep '\->backing ='
git grep '&.*\<backing\>'
git grep '&.*\<file\>'
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-14-vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_pass_through is used as filter, even all node variables has
corresponding names. We want to append it, so it should be
backing-child-based filter like mirror_top.
So, in test_update_perm_tree, first child should be DATA, as we don't
want filters with two filtered children.
bdrv_exclusive_writer is used as a filter once. So it should be filter
anyway. We want to append it, so it should be backing-child-based
fitler too.
Make all FILTERED children to be PRIMARY as well. We are going to force
this rule by assertion soon.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-7-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We do add COW child to the node. In future we are going to forbid
adding COW child to the node that doesn't support backing. So, fix it
here now.
Don't worry about setting bs->backing itself: in further commit we'll
update the block-layer to automatically set/unset this field in generic
code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-6-vsementsov@yandex-team.ru>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
test_parallel_perm_update() does two things that we are going to
restrict in the near future:
1. It updates bs->file field by hand. bs->file will be managed
automatically by generic code (together with bs->children list).
Let's better refactor our "tricky" bds to have own state where one
of children is linked as "selected".
This also looks less "tricky", so avoid using this word.
2. It create FILTERED children that are not PRIMARY. Except for tests
all FILTERED children in the Qemu block layer are always PRIMARY as
well. We are going to formalize this rule, so let's better use DATA
children here.
3. It creates more than one FILTERED child, which is already abandoned
in BDRV_CHILD_FILTERED's description.
While being here, update the picture to better correspond to the test
code.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Hanna Reitz <hreitz@redhat.com>
Message-Id: <20220726201134.924743-5-vsementsov@yandex-team.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At present there are two callers of get_tmp_filename() and they are
inconsistent.
One does:
/* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
char *tmp_filename = g_malloc0(PATH_MAX + 1);
...
ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
while the other does:
s->qcow_filename = g_malloc(PATH_MAX);
ret = get_tmp_filename(s->qcow_filename, PATH_MAX);
As we can see different 'size' arguments are passed. There are also
platform specific implementations inside the function, and the use
of snprintf is really undesirable.
The function name is also misleading. It creates a temporary file,
not just a filename.
Refactor this routine by changing its name and signature to:
char *create_tmp_file(Error **errp)
and use g_get_tmp_dir() / g_mkstemp() for a consistent implementation.
While we are here, add some comments to mention that /var/tmp is
preferred over /tmp on non-win32 hosts.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20221010040432.3380478-2-bin.meng@windriver.com>
[kwolf: Fixed incorrect errno negation and iotest 051]
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Validate that we diagnose each malformed LUKS header scenario with a
distinct error report.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
GNUTLS is supported as a crypto provider since
commit cc4c7c7382
Author: Daniel P. Berrangé <berrange@redhat.com>
Date: Wed Jun 30 17:20:02 2021 +0100
crypto: introduce build system for gnutls crypto backend
So enable the LUKS tests in this config.
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Using FILE * APIs for writing the PSK file results in translation from
UNIX to DOS line endings on Windows. When the crypto PSK code later
loads the credentials the stray \r will result in failure to load the
PSK credentials into GNUTLS.
Rather than switching the FILE* APIs to open in binary format, just
switch to the more concise g_file_set_contents API.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
This is common practice, see the Makefile.target in the aarch64
folder for example.
Suggested-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221012182755.1014853-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
libblkio (https://gitlab.com/libblkio/libblkio/) is a library for
high-performance disk I/O. It currently supports io_uring,
virtio-blk-vhost-user, and virtio-blk-vhost-vdpa with additional drivers
under development.
One of the reasons for developing libblkio is that other applications
besides QEMU can use it. This will be particularly useful for
virtio-blk-vhost-user which applications may wish to use for connecting
to qemu-storage-daemon.
libblkio also gives us an opportunity to develop in Rust behind a C API
that is easy to consume from QEMU.
This commit adds io_uring, nvme-io_uring, virtio-blk-vhost-user, and
virtio-blk-vhost-vdpa BlockDrivers to QEMU using libblkio. It will be
easy to add other libblkio drivers since they will share the majority of
code.
For now I/O buffers are copied through bounce buffers if the libblkio
driver requires it. Later commits add an optimization for
pre-registering guest RAM to avoid bounce buffers.
The syntax is:
--blockdev io_uring,node-name=drive0,filename=test.img,readonly=on|off,cache.direct=on|off
--blockdev nvme-io_uring,node-name=drive0,filename=/dev/ng0n1,readonly=on|off,cache.direct=on
--blockdev virtio-blk-vhost-vdpa,node-name=drive0,path=/dev/vdpa...,readonly=on|off,cache.direct=on
--blockdev virtio-blk-vhost-user,node-name=drive0,path=vhost-user-blk.sock,readonly=on|off,cache.direct=on
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20221013185908.1297568-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
-----BEGIN PGP SIGNATURE-----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=u7pS
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu into staging
aspeed queue :
* Performance improvement with Object class caching
* Serial Flash Discovery Parameters support for m25p80 device
* Various small adjustments on intructions and models
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmNX/WEACgkQUaNDx8/7
# 7KFhERAAhrcLcv15ny8RwatHPjzU00ZPQ0PcxGj1VDT66pCVh6M+rIeRPB2scOey
# Pu8jUvIYJ8w7ozjAP6YTQ1MP/WufniVi91Bx+vs/okSiWZa4dP0/G7NQWoc1at0s
# NBlkg57l1GMEeQb5x8vC1DizTQ1Z8Q8J/Ur3uXukXCmYVJAwHYpl/Foob1IPFgh8
# UcJ55LyuRq99lS8ib6HvRftAsC3DOcA/sl3b/TYR2+iKyi1VS2aZoQzxVCavSBcz
# PoTonT9O4OvIQthAgXRwpylW/aMYU3I7FeyOMKlCNLbmJ8LpVbX2v0KN3WBvWBv4
# OWP0DiqPUuoWFHLUGKbiVOgWQrTQXZyoD70SD/ObE1oMTLmeBoD1oFizQDvokHAR
# g2+gMdWnuWcbyaofY7YwuI6qz22gbrgh8JqX6sEWRDnY7HgCUvPhCsmci+bdN5cf
# dGcE8YKi7aD5gzoU9LRziPlhbwaEsgYLpYS7aGfNcmypgeq6lmNG7xKyw911zCTY
# uqDZWOUJy0tUIUTxoz3o1/KtsTFugjuZ+9W1SxELptJR37iwlP1vumf6bduwcx/3
# ba8tzNoXecXO5Icmq5P3lMNVM/abpkDDKS66HA87mABLEd/eCD0ojR9Kfxo0mD74
# kmQK3MFfJPkTu0ddu1cWhCIgTO7EuLuZL7gzj1oxoeXiU3YcVh8=
# =u7pS
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 25 Oct 2022 11:14:41 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20221025' of https://github.com/legoater/qemu:
arm/aspeed: Replace mx25l25635e chip model
m25p80: Add the w25q01jvq SFPD table
m25p80: Add the w25q512jv SFPD table
m25p80: Add the w25q256 SFPD table
m25p80: Add the mx66l1g45g SFDP table
m25p80: Add the mx25l25635f SFPD table
m25p80: Add the mx25l25635e SFPD table
m25p80: Add erase size for mx25l25635e
m25p80: Add the n25q256a SFDP table
m25p80: Add basic support for the SFDP command
hw/arm/aspeed: increase Bletchley memory size
ast2600: Drop NEON from the CPU features
aspeed/smc: Cache AspeedSMCClass
ssi: cache SSIPeripheralClass to avoid GET_CLASS()
tests/avocado/machine_aspeed.py: Fix typos on buildroot
hw/i2c/aspeed: Fix old reg slave receive
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* Highlight of this PR is Linus Heckemann's GHashTable patch which
brings massive general performance improvements of 9p server
somewhere between factor 6 .. 12.
* Bin Meng's g_mkdir patch is a preparatory patch for upcoming
Windows host support of 9p server.
* The rest of the patches in this PR are 9p test code restructuring
and refactoring changes to improve readability and to ease
maintenance of 9p test code on the long-term.
-----BEGIN PGP SIGNATURE-----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=MxSG
-----END PGP SIGNATURE-----
Merge tag 'pull-9p-20221024' of https://github.com/cschoenebeck/qemu into staging
9pfs: performance, Windows host prep, tests restructure
* Highlight of this PR is Linus Heckemann's GHashTable patch which
brings massive general performance improvements of 9p server
somewhere between factor 6 .. 12.
* Bin Meng's g_mkdir patch is a preparatory patch for upcoming
Windows host support of 9p server.
* The rest of the patches in this PR are 9p test code restructuring
and refactoring changes to improve readability and to ease
maintenance of 9p test code on the long-term.
# -----BEGIN PGP SIGNATURE-----
#
# iQJLBAABCgA1FiEEltjREM96+AhPiFkBNMK1h2Wkc5UFAmNWbs8XHHFlbXVfb3Nz
# QGNydWRlYnl0ZS5jb20ACgkQNMK1h2Wkc5V4cw/8CqoSJqoJixlP8kAGDYWq3CgF
# SKd09rIzLSWyyufAoZr1TqLwRrvEQRlZJSpL4fGvRpQLv0IQCu4x59ohHRob25Tm
# Fe7IxYBNuBwLW4yu+Y7FaujeGoYAi9Qw5q4ijq3/aSSiIeuXySKB2JmW71CQ+Tbe
# uwivsnMtWzQ7qsNwrtXYbxDs7UGkdsiW2sEQUS26GMApAXZoB+38hwtTW2Y9MOrC
# 58JuZza/fUVPzo0V1D0ggRawb5O2VTF5fz8aGFG4FvoyIW6DDZFSfnyre9QxivOl
# 5McWwSQ/D04vdEK9ornGPYr9YRGuP8g07p1EW9OfKeie4I41e9pS3UminK5lVCgo
# SfBHzz96efM5XR+Wnl4yVKowivmTqjwUU8lDqW2eB/7YBRuYUzrpxYe//UPv4q1J
# zaQV3pgwFAVkVJCnkcLCa1JQbH581bXSsuRlDdYqoRYfyzXoxbywNjvn9BXE0PrG
# WRecS//GyN3GVZYxMwb3H052110pYsYIg2YZ2H4QiqCwpEHHvy+L/ZXm19vbDm7B
# GYJQPUK8/y0NGwZsUYcUSx1TWlU9ZPwrbqZfv7e7+B6FL4VNjdaqb8PvS9admWSq
# LOSzrVVIus+nb7tP99d1Fb6oRyCy3x8E48gTr5UtTJHC4SAw/OBJmem6GOc/D490
# H7Dq8Y27qsQ6fT7iPm8=
# =MxSG
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 24 Oct 2022 06:54:07 EDT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: The key's User ID is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* tag 'pull-9p-20221024' of https://github.com/cschoenebeck/qemu: (23 commits)
tests/9p: remove unnecessary g_strdup() calls
tests/9p: merge v9fs_tunlinkat() and do_unlinkat()
tests/9p: merge v9fs_tlink() and do_hardlink()
tests/9p: merge v9fs_tsymlink() and do_symlink()
tests/9p: merge v9fs_tlcreate() and do_lcreate()
tests/9p: merge v9fs_tmkdir() and do_mkdir()
tests/9p: convert v9fs_tflush() to declarative arguments
tests/9p: simplify callers of twrite()
tests/9p: convert v9fs_twrite() to declarative arguments
tests/9p: simplify callers of tlopen()
tests/9p: convert v9fs_tlopen() to declarative arguments
tests/9p: simplify callers of treaddir()
tests/9p: convert v9fs_treaddir() to declarative arguments
tests/9p: simplify callers of tgetattr()
tests/9p: convert v9fs_tgetattr() to declarative arguments
tests/9p: simplify callers of tattach()
tests/9p: merge v9fs_tattach(), do_attach(), do_attach_rqid()
tests/9p: merge v9fs_tversion() and do_version()
tests/9p: simplify callers of twalk()
tests/9p: merge *walk*() functions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is a leftover from before the recent function merge and
refactoring patches:
As these functions do not return control to the caller in
between, it is not necessary to duplicate strings passed to them.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <0f80141cde3904ed0591354059da49d1d60bcdbc.1664917004.git.qemu_oss@crudebyte.com>
As with previous patches, unify those 2 functions into a single function
v9fs_tunlinkat() by using a declarative function arguments approach.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <1dea593edd464908d92501933c068388c01f1744.1664917004.git.qemu_oss@crudebyte.com>
As with previous patches, unify those 2 functions into a single function
v9fs_tlink() by using a declarative function arguments approach.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <cb4d42203e1e4e6027df4924bbe4bdbc002f668b.1664917004.git.qemu_oss@crudebyte.com>
As with previous patches, unify those 2 functions into a single function
v9fs_tsymlink() by using a declarative function arguments approach.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <563f3ad04fe596ce0ae1e2654d1d08237f18c830.1664917004.git.qemu_oss@crudebyte.com>
As with previous patches, unify those 2 functions into a single function
v9fs_tlcreate() by using a declarative function arguments approach.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <4c01b2caa5f5b54a2020fc92701deadd2abf0571.1664917004.git.qemu_oss@crudebyte.com>
As with previous patches, unify those 2 functions into a single function
v9fs_tmkdir() by using a declarative function arguments approach.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <b87b2c972921df980440ff5b2d3e6bb8163d6551.1664917004.git.qemu_oss@crudebyte.com>
Use declarative function arguments for function v9fs_tflush().
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <91b7b154298c500d100b05137146c2905c3acdec.1664917004.git.qemu_oss@crudebyte.com>
Now as twrite() is using a declarative approach, simplify the
code of callers of this function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <7f280ec6a1f9d8afed46567a796562c4dc28afa9.1664917004.git.qemu_oss@crudebyte.com>
Use declarative function arguments for function v9fs_twrite().
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <be0326e2d9ab66f68c06b1766ddf103849d570b4.1664917004.git.qemu_oss@crudebyte.com>
Now as tlopen() is using a declarative approach, simplify the
code of callers of this function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <f74b6153e079fc7a340e5cb575ee32e0fe1e0ae6.1664917004.git.qemu_oss@crudebyte.com>
Use declarative function arguments for function v9fs_tlopen().
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <765ab515353c56f88f0a163631f626a44e9565d6.1664917004.git.qemu_oss@crudebyte.com>
Now as treaddir() is using a declarative approach, simplify the
code of callers of this function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <7cec6f2c7011a481806c34908893b7282702a7a6.1664917004.git.qemu_oss@crudebyte.com>
Use declarative function arguments for function v9fs_treaddir().
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <a66aae4ceb19ec12d245b8c7f33a639584c8e272.1664917004.git.qemu_oss@crudebyte.com>
Now as tgetattr() is using a declarative approach, simplify the
code of callers of this function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <60c6a083f320b86f3172951445df7bbc895932e2.1664917004.git.qemu_oss@crudebyte.com>
Use declarative function arguments for function v9fs_tgetattr().
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <d340a91be96fbfecfb8dacdd7558223b3c0d0e2c.1664917004.git.qemu_oss@crudebyte.com>
Now as tattach() is using a declarative approach, simplify the
code of callers of this function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <9b50e5b89a0072e84a9191d18c19a53546a28bba.1664917004.git.qemu_oss@crudebyte.com>
As with previous patches, unify those 3 functions into a single function
v9fs_tattach() by using a declarative function arguments approach.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <a6756b30bf2a1b25729c5bbabd1c9534a8f20d6f.1664917004.git.qemu_oss@crudebyte.com>
As with previous patches, unify functions v9fs_tversion() and do_version()
into a single function v9fs_tversion() by using a declarative function
arguments approach.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <2d253491aaffd267ec295f056dda47456692cd0c.1664917004.git.qemu_oss@crudebyte.com>
Now as twalk() is using a declarative approach, simplify the
code of callers of this function.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <8b9d3c656ad43b6c953d6bdacd8d9f4c8e599b2a.1664917004.git.qemu_oss@crudebyte.com>
Introduce declarative function calls.
There are currently 4 different functions for sending a 9p 'Twalk'
request: v9fs_twalk(), do_walk(), do_walk_rqids() and
do_walk_expect_error(). They are all doing the same thing, just in a
slightly different way and with slightly different function arguments.
Merge those 4 functions into a single function by using a struct for
function call arguments and use designated initializers when calling
this function to turn usage into a declarative approach, which is
better readable and easier to maintain.
Also move private functions genfid(), split() and split_free() from
virtio-9p-test.c to virtio-9p-client.c.
Based-on: <E1odrya-0004Fv-97@lizzy.crudebyte.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <607969dbfbc63c1be008df9131133711b046e979.1664917004.git.qemu_oss@crudebyte.com>
This patch is pure refactoring, it does not change behaviour.
virtio-9p-test.c grew to 1657 lines. Let's split this file up between
actual 9p test cases vs. 9p test client, to make it easier to
concentrate on the actual 9p tests.
Move the 9p test client code to a new unit virtio-9p-client.c, which
are basically all functions and types prefixed with v9fs_* already.
Note that some client wrapper functions (do_*) are preserved in
virtio-9p-test.c, simply because these wrapper functions are going to
be wiped with subsequent patches anyway.
As the global QGuestAllocator variable is moved to virtio-9p-client.c,
add a new function v9fs_set_allocator() to be used by virtio-9p-test.c
instead of fiddling with a global variable across units and libraries.
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <E1odrya-0004Fv-97@lizzy.crudebyte.com>
Replace 'buidroot' and 'builroot' by 'buildroot'.
Fixes: f7bc7da072 ("test/avocado/machine_aspeed.py: Add tests using buildroot images")
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-Id: <20220923084803.498337-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
When tmpfs is NULL, a build warning is seen with GCC 9.3.0.
It's strange that GCC 11.2.0 on Ubuntu 22.04 does not catch this,
neither did the QEMU CI.
While we are here, improve the error message as well.
Reported-by: Shengjiang Wu <shengjiang.wu@windriver.com>
Fixes: e6efe236c1 ("tests/qtest: vhost-user-test: Avoid using hardcoded /tmp")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221017132023.2228641-2-bmeng.cn@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When tmpfs is NULL, a build warning is seen with GCC 9.3.0.
It's strange that GCC 11.2.0 on Ubuntu 22.04 does not catch this,
neither did the QEMU CI.
While we are here, improve the error message as well.
Reported-by: Shengjiang Wu <shengjiang.wu@windriver.com>
Fixes: e5553c1b8d ("tests/qtest: migration-test: Avoid using hardcoded /tmp")
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20221017132023.2228641-1-bmeng.cn@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only issue with FMA instructions is that there are _a lot_ of them (30
opcodes, each of which comes in up to 4 versions depending on VEX.W and
VEX.L; a total of 96 possibilities). However, they can be implement with
only 6 helpers, two for scalar operations and four for packed operations.
(Scalar versions do not do any merging; they only affect the bottom 32
or 64 bits of the output operand. Therefore, there is no separate XMM
and YMM of the scalar helpers).
First, we can reduce the number of helpers to one third by passing four
operands (one output and three inputs); the reordering of which operands
go to the multiply and which go to the add is done in emit.c.
Second, the different instructions also dispatch to the same softfloat
function, so the flags for float32_muladd and float64_muladd are passed
in the helper as int arguments, with a little extra complication to
handle FMADDSUB and FMSUBADD.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
F16C only consists of two instructions, which are a bit peculiar
nevertheless.
First, they access only the low half of an YMM or XMM register for the
packed-half operand; the exact size still depends on the VEX.L flag.
This is similar to the existing avx_movx flag, but not exactly because
avx_movx is hardcoded to affect operand 2. To this end I added a "ph"
format name; it's possible to reuse this approach for the VPMOVSX and
VPMOVZX instructions, though that would also require adding two more
formats for the low-quarter and low-eighth of an operand.
Second, VCVTPS2PH is somewhat weird because it *stores* the result of
the instruction into memory rather than loading it.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extracted from a patch by Paul Brook <paul@nowt.org>.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* New VNC qtest
* Fixes related to temporary file handling in the tests
* Use signal() instead of sigaction() since the latter does not work on Windows
* Some other small clean-ups
-----BEGIN PGP SIGNATURE-----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=4f+b
-----END PGP SIGNATURE-----
Merge tag 'pull-request-2022-10-12' of https://gitlab.com/thuth/qemu into staging
* Rework of qtests to support hot plugging tests on q35
* New VNC qtest
* Fixes related to temporary file handling in the tests
* Use signal() instead of sigaction() since the latter does not work on Windows
* Some other small clean-ups
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmNGz1URHHRodXRoQHJl
# ZGhhdC5jb20ACgkQLtnXdP5wLbXwxxAAoh9CeYKLyPFPe71XGsSWW4mQDkny+4CA
# AFBfcEchPSyOoTJwuSHS5cL27KkL1Wy7wTSlWdcQ2Z4LA8hexopfPtCVlizH8vQh
# hHVP5KLDY7WA7bsuRznrjUjXtjLL9mExuPm3QZ+YxH/3rNhISvq1GfC9Z5PQ/zNp
# GagCW+WiFyEYyhRHJnVVTJfZV0NCbJp9KCCJ6n/Rag80JRQiouGQsKLfRoRhvkGC
# 13dWq2NeDq9xE1k1ThUZdIpUxJO4cA+9bh6LzGOIcHX8akfkryh3NGCWuojX3XDF
# 2CRyyblfjMIp5HUcKNOrQzY1oGRn8y5537ycUkEsropSMdAccIqNwlcWO7whLEGn
# 7nbogrPt8Orezytl5ZM3WopWlge5KA2vxOUURx487LnZC2/g7l2unrCDv0c3PHDb
# U2fD5do7ZtPOl9Uz8QkYPo5CzEDnKPmPv1txOMBRcBZsvmXPZMxRWwsYavB/RloG
# nI9IvG3ZW6ivKwoPPceJberL8Ndq+pqn7y4CNNAAunHSjJ2H0YS1m1F/HfVWKJYJ
# uStXy3IZ5Qo8E+IRbPYyM68yBgrnaShuAvTSax8tWjhHOR8HetrzPABMrWylCrdo
# gaeSCEZmqf2zIYHQ2q8c7U/YrHgFNHlLz9yCyM6rZtU9dOAe52PG2TlRQomlGP76
# NKnti3RJWG4=
# =4f+b
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 12 Oct 2022 10:29:41 EDT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* tag 'pull-request-2022-10-12' of https://gitlab.com/thuth/qemu:
tests/unit/test-image-locking: Fix handling of temporary files
tests/qtest: libqtest: Install signal handler via signal()
tests/qtest: migration-test: Avoid using hardcoded /tmp
qtest: start a VNC test
tests/avocado: Add missing require_netdev('user') checks
tests/x86: Add 'q35' machine type to ivshmem-test
tests/x86: Add 'q35' machine type to drive_del-test
tests/x86: replace snprint() by g_strdup_printf() in drive_del-test
tests/x86: Fix comment typo in drive_del-test
tests/x86: Add 'q35' machine type to hotplug hd-geo-test
tests/x86: Add 'q35' machine type to override-tests in hd-geo-test
tests/x86: Refactor hot unplug hd-geo-test
tests/x86: Add subtest with 'q35' machine type to device-plug-test
tests/x86: add helper qtest_qmp_device_del_send()
tests/migration: remove the unused local variable
qtest: "-display none" is set in qtest_init()
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This has been tested under msys2 & windows 11. I haven't tried to make
it work with other environments yet, but that should be enough to
validate the channel-command implementation anyway.
Here are the changes:
- drop tests/ from fifo/pipe path, to avoid directory issues
- use g_find_program() to lookup the socat executable (otherwise we
would need to change ChanneCommand to use G_SPAWN_SEARCH_PATH, and deal
with missing socat differently)
- skip the "echo" test when socat is missing as well
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20221006113657.2656108-7-marcandre.lureau@redhat.com>