This adds a new "-d" switch to "info mtree" to print dispatch tree
internals.
This changes the way "-f" is handled - it prints now flat views and
associated address spaces.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-15-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This creates a new AS object without any FlatView as
memory_region_transaction_commit() may want to reuse the empty FV.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-14-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This allows sharing flat views between address spaces (AS) when
the same root memory region is used when creating a new address space.
This is done by walking through all ASes and caching one FlatView per
a physical root MR (i.e. not aliased).
This removes search for duplicates from address_space_init_shareable() as
FlatViews are shared elsewhere and keeping as::ref_count correct seems
an unnecessary and useless complication.
This should cause no change and memory use or boot time yet.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-13-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
So it is called (twice) from the same function. This is to make the next
patches a bit simpler.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-12-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is to make next patches simpler.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-11-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Address spaces get to keep a root MR (alias or not) but FlatView stores
the actual MR as this is going to be used later on to decide whether to
share a particular FlatView or not.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-10-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This renames some helpers to reflect better what they do.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-9-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We store AddressSpaceDispatch* in FlatView anyway so there is no need
to carry it from mem_add() to register_subpage/register_multipage.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-8-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
AS in ASD is only used to pass AS from mem_begin() to register_subpage()
to store it in MemoryRegionSection, we can do this directly now.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-6-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As we are going to share FlatView's between AddressSpace's,
and AddressSpaceDispatch is a structure to perform quick lookup
in FlatView, this moves ASD to FlatView.
After previosly open coded ASD rendering, we can also remove
as->next_dispatch as the new FlatView pointer is stored
on a stack and set to an AS atomically.
flatview_destroy() is executed under RCU instead of
address_space_dispatch_free() now.
This makes mem_begin/mem_commit to work with ASD and mem_add with FV
as later on mem_add will be taking FV as an argument anyway.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-5-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This moves a FlatView allocation and initialization to a helper.
While we are nere, replace g_new with g_new0 to not to bother if we add
new fields in the future.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-4-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We are going to share FlatView's between AddressSpace's and per-AS
memory listeners won't suit the purpose anymore so open code
the dispatch tree rendering.
Since there is a good chance that dispatch_listener was the only
listener, this avoids address_space_update_topology_pass() if there is
no registered listeners; this should improve starting time.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-3-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds an AS** parameter to address_space_do_translate()
to make it easier for the next patch to share FlatViews.
This should cause no behavioural change.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Message-Id: <20170921085110.25598-2-aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's possible for address_space_get_flatview() as it currently stands
to cause a use-after-free for the returned FlatView, if the reference
count is incremented after the FlatView has been replaced by a writer:
thread 1 thread 2 RCU thread
-------------------------------------------------------------
rcu_read_lock
read as->current_map
set as->current_map
flatview_unref
'--> call_rcu
flatview_ref
[ref=1]
rcu_read_unlock
flatview_destroy
<badness>
Since FlatViews are not updated very often, we can just detect the
situation using a new atomic op atomic_fetch_inc_nonzero, similar to
Linux's atomic_inc_not_zero, which performs the refcount increment only if
it hasn't already hit zero. This is similar to Linux commit de09a9771a53
("CRED: Fix get_task_cred() and task_state() to not resurrect dead
credentials", 2010-07-29).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This avoids a name clash with the access macro on windows 64:
make
CHK version_gen.h
CC aarch64-softmmu/memory.o
/home/konrad/qemu/memory.c: In function 'access_with_adjusted_size':
/home/konrad/qemu/memory.c:591:73: error: macro "access" passed 7 arguments, \
but takes just 2
(size - access_size - i) * 8, access_mask, attrs);
^
Signed-off-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-Id: <1505988260-8483-1-git-send-email-frederic.konrad@adacore.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pflash toggles mr->romd_mode. So this assert does not always hold.
1) a device was added with !mr->romd_mode, therefore effectively not
creating a kvm slot as we want to trap every access (add = false).
2) mr->romd_mode was toggled on before remove it. There is now
actually no slot to remove and the assert is wrong.
So let's just drop the assert.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920145025.19403-1-david@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We should guarantee that RAM will not be modified while VM has a stopped
state, otherwise it can lead to negative consequences during post-copy
migration. In RUN_STATE_FINISH_MIGRATE step, it's expected that RAM on
source side will not be modified as this could lead to non-consistent vm state
on the destination side. Also RAM access during postcopy-ram migration with
enabled release-ram capability can lead to sad consequences.
Let's add enable_backend() callback to avoid undesirable virtioqueue changes
in the guest memory.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Message-Id: <20170919120733.22020-1-pbutsykin@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-----BEGIN PGP SIGNATURE-----
iEYEABECAAYFAlnCD9sACgkQAvw66wEB28KlTQCeNUO473jgHQvT2x4igufeBSN3
3cIAn16yvNgIxMJRjIQMeMjkY77ZNMJo
=LovD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/gkurz/tags/for-upstream' into staging
These patches fix regressions in 2.10
# gpg: Signature made Wed 20 Sep 2017 07:51:07 BST
# gpg: using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg: aka "Greg Kurz <groug@free.fr>"
# gpg: aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg: aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg: aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894 DBA2 02FC 3AEB 0101 DBC2
* remotes/gkurz/tags/for-upstream:
9pfs: check the size of transport buffer before marshaling
9pfs: fix name_to_path assertion in v9fs_complete_rename()
9pfs: fix readdir() for 9p2000.u
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----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=LQ8U
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/ehabkost/tags/machine-next-pull-request' into staging
Machine/CPU/NUMA queue, 2017-09-19
# gpg: Signature made Tue 19 Sep 2017 21:17:01 BST
# gpg: using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
MAINTAINERS: Update git URLs for my trees
hw/acpi-build: Fix SRAT memory building in case of node 0 without RAM
NUMA: Replace MAX_NODES with nb_numa_nodes in for loop
numa: cpu: calculate/set default node-ids after all -numa CLI options are parsed
arm: drop intermediate cpu_model -> cpu type parsing and use cpu type directly
pc: use generic cpu_model parsing
vl.c: convert cpu_model to cpu type and set of global properties before machine_init()
cpu: make cpu_generic_init() abort QEMU on error
qom: cpus: split cpu_generic_init() on feature parsing and cpu creation parts
hostmem-file: Add "discard-data" option
osdep: Define QEMU_MADV_REMOVE
vl: Clean up user-creatable objects when exiting
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
v9fs_do_readdir_with_stat() should check for a maximum buffer size
before an attempt to marshal gathered data. Otherwise, buffers assumed
as misconfigured and the transport would be broken.
The patch brings v9fs_do_readdir_with_stat() in conformity with
v9fs_do_readdir() behavior.
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
[groug, regression caused my commit 8d37de41ca # 2.10]
Signed-off-by: Greg Kurz <groug@kaod.org>
The third parameter of v9fs_co_name_to_path() must not contain `/'
character.
The issue is most likely related to 9p2000.u protocol only.
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
[groug, regression caused by commit f57f587857 # 2.10]
Signed-off-by: Greg Kurz <groug@kaod.org>
If the client is using 9p2000.u, the following occurs:
$ cd ${virtfs_shared_dir}
$ mkdir -p a/b/c
$ ls a/b
ls: cannot access 'a/b/a': No such file or directory
ls: cannot access 'a/b/b': No such file or directory
a b c
instead of the expected:
$ ls a/b
c
This is a regression introduced by commit f57f5878578a;
local_name_to_path() now resolves ".." and "." in paths,
and v9fs_do_readdir_with_stat()->stat_to_v9stat() then
copies the basename of the resulting path to the response.
With the example above, this means that "." and ".." are
turned into "b" and "a" respectively...
stat_to_v9stat() currently assumes it is passed a full
canonicalized path and uses it to do two different things:
1) to pass it to v9fs_co_readlink() in case the file is a symbolic
link
2) to set the name field of the V9fsStat structure to the basename
part of the given path
It only has two users: v9fs_stat() and v9fs_do_readdir_with_stat().
v9fs_stat() really needs 1) and 2) to be performed since it starts
with the full canonicalized path stored in the fid. It is different
for v9fs_do_readdir_with_stat() though because the name we want to
put into the V9fsStat structure is the d_name field of the dirent
actually (ie, we want to keep the "." and ".." special names). So,
we only need 1) in this case.
This patch hence adds a basename argument to stat_to_v9stat(), to
be used to set the name field of the V9fsStat structure, and moves
the basename logic to v9fs_stat().
Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com>
(groug, renamed old name argument to path and updated changelog)
Signed-off-by: Greg Kurz <groug@kaod.org>
List the branches where I queue patches for Machine Core, NUMA,
Memory Backends, and X86. Update the NUMA section to list the
"machine-next" branch instead of "numa".
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170901153928.17058-1-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Currently, Using the fisrt node without memory on the machine makes
QEMU unhappy. With this example command line:
... \
-m 1024M,slots=4,maxmem=32G \
-numa node,nodeid=0 \
-numa node,mem=1024M,nodeid=1 \
-numa node,nodeid=2 \
-numa node,nodeid=3 \
Guest reports "No NUMA configuration found" and the NUMA topology is
wrong.
This is because when QEMU builds ACPI SRAT, it regards node 0 as the
default node to deal with the memory hole(640K-1M). this means the
node0 must have some memory(>1M), but, actually it can have no
memory.
Fix this problem by cut out the 640K hole in the same way the PCI
4G hole does.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Message-Id: <1504231805-30957-2-git-send-email-douly.fnst@cn.fujitsu.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
In QEMU, the number of the NUMA nodes is determined by parse_numa_opts().
Then, QEMU uses it for iteration, for example:
for (i = 0; i < nb_numa_nodes; i++)
However, in memory_region_allocate_system_memory(), it uses MAX_NODES
not nb_numa_nodes.
So, replace MAX_NODES with nb_numa_nodes to keep code consistency and
reduce the loop times.
Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com>
Message-Id: <1503387936-3483-1-git-send-email-douly.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Calculating default node-ids for CPUs in possible_cpu_arch_ids()
is rather fragile since defaults calculation uses nb_numa_nodes but
callback might be potentially called early before all -numa CLI
options are parsed, which would lead to cpus assigned only upto
nb_numa_nodes at the time possible_cpu_arch_ids() is called.
Issue was introduced by
(7c88e65 numa: mirror cpu to node mapping in MachineState::possible_cpus)
and for example CLI:
-smp 4 -numa node,cpus=0 -numa node
would set props.node-id in possible_cpus array for every non
explicitly mapped CPU to the first node.
Issue is not visible to guest nor to mgmt interface due to
1) implictly mapped cpus are forced to the first node in
case of partial mapping
2) in case of default mapping possible_cpu_arch_ids() is
called after all -numa options are parsed (resulting
in correct mapping).
However it's fragile to rely on late execution of
possible_cpu_arch_ids(), therefore add machine specific
callback that returns node-id for CPU and use it to calculate/
set defaults at machine_numa_finish_init() time when all -numa
options are parsed.
Reported-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1496314408-163972-1-git-send-email-imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- introduce virtio-gpu-ccw, with virtio-gpu endian fixes
- lots of cleanup in the s390x code
- make device_add work for s390x cpus
- enable seccomp on s390x
- an ivshmem endian fix
- set the reserved DHCP client architecture id for netboot
- fixes in the css and pci support
-----BEGIN PGP SIGNATURE-----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=vUS6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20170919-v2' into staging
Assorted s390x patches:
- introduce virtio-gpu-ccw, with virtio-gpu endian fixes
- lots of cleanup in the s390x code
- make device_add work for s390x cpus
- enable seccomp on s390x
- an ivshmem endian fix
- set the reserved DHCP client architecture id for netboot
- fixes in the css and pci support
# gpg: Signature made Tue 19 Sep 2017 17:39:45 BST
# gpg: using RSA key 0xDECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20170919-v2: (38 commits)
MAINTAINERS/s390x: add terminal3270.c
virtio-ccw: Create a virtio gpu device for the ccw bus
virtio-gpu: Handle endian conversion
s390x/ccw: create s390 phb for compat reasons as well
configure: Allow --enable-seccomp on s390x, too
virtio-ccw: remove stale comments on endianness
s390x: allow CPU hotplug in random core-id order
s390x: generate sclp cpu information from possible_cpus
s390x: get rid of cpu_s390x_create()
s390x: get rid of cpu_states and use possible_cpus instead
s390x: implement query-hotpluggable-cpus
s390x: CPU hot unplug via device_del cannot work for now
s390x: allow cpu hotplug via device_add
s390x: print CPU definitions in sorted order
target/s390x: rename next_cpu_id to next_core_id
target/s390x: use "core-id" for cpu number/address/id handling
target/s390x: set cpu->id for linux user when realizing
s390x: allow only 1 CPU with TCG
target/s390x: use program_interrupt() in per_check_exception()
target/s390x: use trigger_pgm_exception() in s390_cpu_handle_mmu_fault()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Wire up the virtio-gpu device for the CCW bus. The virtio-gpu
is a virtio-1 device, so disable revision 0.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <6c53f939cf2d64b66d2a6878b29c9bf3820f3d5b.1505485574.git.alifm@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Virtio GPU code currently only supports litte endian format,
and so using the Virtio GPU device on a big endian machine
does not work.
Let's fix it by supporting the correct host cpu byte order.
Signed-off-by: Farhan Ali <alifm@linux.vnet.ibm.com>
Message-Id: <dc748e15f36db808f90b4f2393bc29ba7556a9f6.1505485574.git.alifm@linux.vnet.ibm.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
d32bd032d8 ("s390x/ccw: create s390 phb conditionally") made
registering the s390 pci host bridge conditional on presense
of the zpci facility bit. Sadly, that breaks migration from
machines that did not use the cpu model (2.7 and previous).
Create the s390 phb for pre-cpu model machines as well: We can
tweak s390_has_feat() to always indicate the zpci facility bit
when no cpu model is available (on 2.7 and previous compat machines).
Fixes: d32bd032d8 ("s390x/ccw: create s390 phb conditionally")
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
libseccomp supports s390x since version 2.3.0, and I was able to start
a VM with "-sandbox on" without any obvious problems by using this patch,
so it should be safe to allow --enable-seccomp on s390x nowadays, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1505385363-27717-1-git-send-email-thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Eduardo Otubo <otubo@redhat.com>
Acked-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We have two stale comments suggesting one should think about virtio
config space endianness a bit longer. We have just done that, and came to
the conclusion we are fine as is: it's the responsibility of the virtio
device and not of the transport (and that is how it works now). Putting
the responsibility into the transport isn't even possible, because the
transport would have to know about the config space layout of each
device.
Let us remove the stale comments.
Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20170914105535.47941-1-pasic@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
SCLP correctly indicates the core-id aka. CPU address for each available
CPU.
As the core-id corresponds to cpu_index, also a newly created kvm vcpu
gets assigned this core-id as vcpu id. So SIGP in the kernel works
correctly (it uses the vcpu id to lookup the correct CPU).
So there should be nothing hindering us from hotplugging CPUs in random
core-id order.
This now makes sure that the output from "query-hotpluggable-cpus"
is completely true. Until now, a specific order is implicit. Performance
vice, hotplugging CPUs in non-sequential order might not be the best thing
to do, as VCPU lookup inside KVM might be a little slower. But that
doesn't hinder us from supporting it.
next_core_id is now used by linux user only.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-23-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This is the first step to allow hot plugging of CPUs in a non-sequential
order. If a cpu is available ("plugged") can directly be decided by
looking at the cpu state pointer.
This makes sure, that really only cpus attached to the machine are
reported.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-22-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that there is only one user of cpu_s390x_create() left, make cpu
creation look like on x86.
- Perform the model/properties split and checks in s390_init_cpus()
- Parse features only once without having to remember if already parsed
- Pass only the typename to s390x_new_cpu()
- Use the typename of an existing CPU for hotplug via cpu-add
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-21-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that we have possible_cpus, we can get rid of the global variable
and rewrite s390_cpu_addr2state() to use it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-20-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CPU hotplug is only possible on a per core basis on s390x. So let's
add possible_cpus and wire everything up properly.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-19-david@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
device_del on a CPU will currently do nothing. Let's emit an error
telling that this is will currently not work (there is no architecture
support on s390x). Error message copied from ppc.
(qemu) device_del cpu1
device_del cpu1
CPU hot unplug not supported on this machine
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
E.g. the following now works:
device_add host-s390-cpu,id=cpu1,core-id=1
The system will perform the same checks as when using cpu_add:
- If the core_id is already in use
- If the next sequential core_id isn't used
- If core-id >= max_cpu is specified
In addition, mixed CPU models are checked. E.g. if starting with
-cpu host and trying to hotplug "qemu-s390-cpu":
"Mixed CPU models are not supported on s390x."
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Other architectures provide nicely sorted lists, let's do it similarly on
s390x.
While at it, clean up the code we have to touch either way.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Adapt to the new term "core_id". While at it, fix the type and drop the
initialization to 0 (which is superfluous).
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Some time ago we discussed that using "id" as property name is not the
right thing to do, as it is a reserved property for other devices and
will not work with device_add.
Switch to the term "core-id" instead, and use it as an equivalent to
"CPU address" mentioned in the PoP. There is no such thing as cpu number,
so rename env.cpu_num to env.core_id. We use "core-id" as this is the
common term to use for device_add later on (x86 and ppc).
We can get rid of cpu->id now. Keep cpu_index and env->core_id in sync.
cpu_index was already implicitly used by e.g. cpu_exists(), so keeping
both in sync seems to be the right thing to do.
cpu_index will now no longer automatically get set via
cpu_exec_realizefn(). For now, we were lucky that both implicitly stayed
in sync.
Our new cpu property "core-id" can be a static property. Range checks can
be avoided by using the correct type and the "setting after realized"
check is done implicitly.
device_add will later need the reserved "id" property. Hotplugging a CPU
on s390x will then be: "device_add host-s390-cpu,id=cpu2,core-id=2".
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
scc->next_cpu_id is updated when realizing. Setting it just before that
point looks cleaner.
Reviewed-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Specifying more than 1 CPU (e.g. -smp 5) leads to SIGP errors (the
guest tries to bring these CPUs up but fails), because we don't support
multiple CPUs on s390x under TCG.
Let's bail out if more than 1 is specified, so we don't raise people's
hope.
Tested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-12-david@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Clean it up by reusing program_interrupt(). Add a concern regarding
ilen.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This looks cleaner. linux-user will not use the ilen field, so setting
it doesn't do any harm.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-10-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implemented in sclp.c, so let's move it to the right include file.
Also adjust some includes.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170913132417.24384-9-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
