There is no reason why for example qemu-ga should include all the
definitions for the QEMU monitor. However, there are a few
that are needed (qapi_free_SocketAddress, qapi_free_InetSocketAddress,
ErrorClass_lookup). These should be moved to a separate "core"
.json schema that goes into libqemuutil.a.
For now, make this clearer by moving the qapi-*.o definitions out
of libqemuutil.a. Once the above refactoring is done, qga-obj-y
should not include anymore qapi-types.o and qapi-visit.o.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Split them between libqemuutil.a and, for those used by qemu-img/io/nbd,
block-obj-y.
Static libraries ensure that binaries such as qemu-ga do not include
unused modules.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Helper function for dpa_w_ph, dpax_w_ph, dps_w_ph and dpsx_w_ph incorrectly
defines halfword vector elements as unsigned values. This results in wrong
output which is not triggered in the tests as they also follow this logic.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support for compiling for GCOV test coverage, enabled
with '--enable-gcov' during configure.
Test coverage will be reported after each test.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The change removes some unnecessary and incorrect code for EXTR_S.H.
Further, it corrects the mask for shift value in the EXTR_ instructions. It also
extends the existing tests so they trigger the issues corrected with the change.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Upper 4 bits of ccond (bits 31..28 ) of DSPControl register are not used in
the MIPS32 architecture. They are used in the MIPS64 architecture. For MIPS32
these bits must be written as zero, and return zero on read.
The change fixes writes (WRDSP) and reads (RDDSP) to the register. It also fixes
the tests that use these instructions, and makes them smaller and simpler.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds some first tests for qcow2's dependency handling when two
parallel write requests access the same cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We need to eliminate calls to qemu_aio_flush() since the function is
being removed. Most callers will use bdrv_drain_all() instead but
test-thread-pool.c is lower level.
Since the test uses the global AioContext we can loop on qemu_aio_wait()
to wait for aio and bh activity to complete.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There has been confusion between various aio wait and flush functions.
It's time to get rid of qemu_aio_flush() but in the aio test cases we
really do want this low-level functionality.
Therefore declare a local wait_for_aio() helper for the test cases.
Drop the aio_flush() test case.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These spelling bugs were found by codespell:
supressing -> suppressing
transfered -> transferred
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
helper_shilo has not been shifting an accumulator value correctly for negative
values in 'shift' field. Minor optimization for shift=0 case.
This change also adds tests that will trigger issue and check for regressions.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Content of register rs should be shifted for pos before applying a mask.
This change contains both fix for the instruction and to the existing test.
Signed-off-by: Petar Jovanovic <petarj@mips.com>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This bug occurs when the SET flag of Register B is enabled. When an RTC
data register (i.e. any of the ten time/calender CMOS bytes) is set, the
data is (as expected) correctly stored in the cmos_data array. However,
since the SET flag is enabled, the function rtc_set_time is not invoked.
As a result, the field base_rtc in RTCState remains uninitialized. This
causes a problem on subsequent writes which can end up overwriting data.
To see this, consider writing data to Register A after having written
data to any of the RTC data registers; the following figure illustrates
the call stack for the Register A write operation:
+- cmos_io_port_write
+-- check_update_timer
+---- get_next_alarm
+------ rtc_update_time
In rtc_update_time, get_guest_rtc calculates the wrong time and
overwrites the previously written RTC data register values.
Signed-off-by: Alex Horn <alex.horn@cs.ox.ac.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The cancellation test is failing on the buildbots. While the failure
merits a little more investigation to understand what is going on,
the logs show that the failure is not impacting the coverage
provided by the test. Hence, loosen a bit the assertions in a
way that should let the test proceed and hopefully pass.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/build-urgent:
Makefile: Add missing dependency (fix parallel builds)
tests: link in stubs
libcacard: link in stubs
libcacard: make unnesting rules available to Makefile.objs
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
ST0 shouldn't include 0x20 (FD_SR0_SEEK) after READ ID.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tested-by: Hervé Poussineau <hpoussin@reactos.org>
Do not always set FD_SR0_SEEK, as callers already set it if needed.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To do this, we start a qemu-nbd process at _make_test_img and kill
it in _cleanup_test_img. $TEST_IMG is changed to point at the TCP
server. We also remove the checks for existence of binaries from
common.config - they're duplicated in common, and we can make the
qemu-nbd check conditional on $IMGPROTO being "nbd" if we do it there.
Signed-off-by: Nick Thomas <nick@bytemark.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Actually writing all the content with 512 byte sector size would take
forever, therefore build the image file with a Python script and use
qemu-io for the last write that actually triggers the refcount table
growth.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is setting the stage for a cleanup of FPREM and FPREM1 helpers while being
sure that they behave same as bare metal.
The test constructs operands using combinations of corner cases for the
floating-point bitfields and prints operands, result and FPU status word for
FPREM and FPREM1. The outputs can then be compared between bare metal and QEMU.
The 'run-test-i386-fprem' make target does just that.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
With i386-linux-user target on x86_64 host, this does not introduce any new test
failures.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
