Commit Graph

30666 Commits

Author SHA1 Message Date
Igor Mammedov
d6610bc2ad acpi: ich9: add CPU hotplug handling to Q35 machine
.. use IO port 0cd8-0xcf7 range for CPU present bitmap

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:44 +02:00
Igor Mammedov
81cea5e7f2 acpi: factor out common cpu hotplug code for PIIX4/Q35
.. so it could be used for adding CPU hotplug to Q35 machine

Add an additional header with that will be shared between
C and ASL code: include/hw/acpi/cpu_hotplug_defs.h

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:44 +02:00
Michael S. Tsirkin
99fd437dee acpi-build: enable hotplug for PCI bridges
This enables support for device hotplug behind
pci bridges. Bridge devices themselves need
to be pre-configured on qemu command line.

Design:
    - at machine init time, assign "bsel" property to bridges with
      hotplug support
    - dynamically (At ACPI table read) generate ACPI code to handle
      hotplug events for each bridge with "bsel" property

Note: ACPI doesn't support adding or removing bridges by hotplug.
We detect and prevent removal of bridges by hotplug,
unless they were added by hotplug previously
(and so, are not described by ACPI).

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:44 +02:00
Michael S. Tsirkin
9e047b9824 piix4: add acpi pci hotplug support
Add support for acpi pci hotplug using the
new infrastructure.
PIIX4 legacy interface is maintained as is for
machine types 1.7 and older.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:11:44 +02:00
Michael S. Tsirkin
db4728e6fe pcihp: generalization of piix4 acpi
Add ACPI based PCI hotplug library with bridge hotplug
support.
Design
   - each bus gets assigned "bsel" property.
   - ACPI code writes this number
     to a new BNUM register, then uses existing
     UP/DOWN registers to probe slot status;
     to eject, write number to BNUM register,
     then slot into existing EJ.

The interface is actually backwards-compatible with
existing PIIX4 ACPI (though not migration compatible).

This is split out from PIIX4 codebase so we can
reuse it for Q35 as well.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Michael S. Tsirkin
eb0acfdde6 pci: add pci_for_each_bus_depth_first
Useful for ACPI hotplug.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Igor Mammedov
4d25299cb2 pc: make: fix dependencies: rebuild when included file is changed
some *.dsl files include another *.dsl files but there weren't
any dependicies and when included file changed target table wasn't
rebuild. Fix this by using the same auto dependency generation
as for C files.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
0651596cbe acpi unit-test: do not fail on asl mismatch
The asl comparison will break every time the ACPI
tables are updated. This may break the git bisect.
Instead of failing print a warning on stderr
including the retained asl files, so they can be
compared offline.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
69d09245d1 acpi unit-test: resolved iasl crash
It seems that iasl has an issue when disassembles
some ACPI tables using the command line:
iasl -e DSDT -e SSDT -d HPET

Modified the iasl command line to "iasl -d HPET"
until the problem is solved. The command line
remained the same for DSDT and SSDT tables.

Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
a3a74ab90e acpi unit-test: renamed ssdt_tables to tables
Just a refactoring, ssdt_tables name was confusing as
it included other tables as well.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Alexey Kardashevskiy
084137ddbb tests: fix acpi to work on bigendian host
Double endianness convertion make this test failing on POWERPC machine
running in big-endian.

This fixes the test to success on big-endian host.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
4500bc98a6 acpi unit-test: hook to rebuild expected aml files
When running the test with TEST_ACPI_REBUILD_AML=y environment
variable, the test will rebuild and validate the expected aml
files.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
cebc92a213 acpi unit-test: added script to rebuild the expected aml files
Acpi unit-test will fail every time the acpi tables change.
This script rebuild the expected aml files, so the test
will pass. It also validates the modifications.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
cc8fa0e808 acpi unit-test: extract iasl executable from configuration
The test checked if iasl is installed by running "iasl"
and checking the error output.
It is better to use the iasl executable as appears
in configuration.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
9dd6cabdd3 configure: add CONFIG_IASL to config-host.h
Acpi unit-tests will extract iasl executable
from CONFIG_IASL define.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
9e8458c023 acpi unit-test: compare DSDT and SSDT tables against expected values
This test will run only if iasl is installed on the host machine.
The test plan:
 1. Dumps the ACPI tables as AML on the disk.
 2. Runs iasl to disassembly the tables into ASL files.
 3. Runs iasl to disassembly the offline AML files into ASL files.
 4. Compares the ASL files.

The test runs for both default machine and q35.
In case the test fails, it can be easily tweaked to
show the differences between the ASL files and
understand the issue.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
c2304b52f1 configure: added acpi unit-test files
Ensure configure will set-up links for the files
if the build is created in other directory.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Marcel Apfelbaum
d259793808 acpi unit-test: add test files
Added unit-test's expected aml files to be compared
with the actual ACPI tables.

Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:49 +02:00
Stefan Weil
4dd72e04c2 virtio: Fix return value for dummy function vhost_net_virtqueue_pending
cgcc complains that -ENOSYS is not a good value for 'bool'.

A dummy virtio will never have pending queue entries, so let us return
false.

Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:48 +02:00
Gabriel L. Somlo
8977557ae4 ACPI: Fix AppleSMC _STA size
Minimize the storage used for AppleSMC's _STA (8bit), relying on ASL
to implicitly convert it to the officially specified 32bit value.

Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:48 +02:00
Gabriel L. Somlo
15bce1b7c5 Add DSDT node for AppleSMC
AppleSMC (-device isa-applesmc) is required to boot OS X guests.
OS X expects a SMC node to be present in the ACPI DSDT. This patch
adds a SMC node to the DSDT, and dynamically patches the return value
of SMC._STA to either 0x0B if the chip is present, or otherwise to 0x00,
before booting the guest.

Signed-off-by: Gabriel Somlo <somlo@cmu.edu>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:48 +02:00
Laszlo Ersek
3e16d14fd9 Python-lang gdb script to extract x86_64 guest vmcore from qemu coredump
When qemu dies unexpectedly, for example in response to an explicit
abort() call, or (more importantly) when an external signal is delivered
to it that results in a coredump, sometimes it is useful to extract the
guest vmcore from the qemu process' memory image. The guest vmcore might
help understand an emulation problem in qemu, or help debug the guest.

This script reimplements (and cuts many features of) the
qmp_dump_guest_memory() command in gdb/Python,

  https://sourceware.org/gdb/current/onlinedocs/gdb/Python-API.html

working off the saved memory image of the qemu process. The docstring in
the patch (serving as gdb help text) describes the limitations relative to
the QMP command.

Dependencies of qmp_dump_guest_memory() have been reimplemented as needed.
I sought to follow the general structure, sticking to original function
names where possible. However, keeping it simple prevailed in some places.

The patch has been tested with a 4 VCPU, 768 MB, RHEL-6.4
(2.6.32-358.el6.x86_64) guest:

- The script printed

> guest RAM blocks:
> target_start     target_end       host_addr        message count
> ---------------- ---------------- ---------------- ------- -----
> 0000000000000000 00000000000a0000 00007f95d0000000 added       1
> 00000000000a0000 00000000000b0000 00007f960ac00000 added       2
> 00000000000c0000 00000000000ca000 00007f95d00c0000 added       3
> 00000000000ca000 00000000000cd000 00007f95d00ca000 joined      3
> 00000000000cd000 00000000000d0000 00007f95d00cd000 joined      3
> 00000000000d0000 00000000000f0000 00007f95d00d0000 joined      3
> 00000000000f0000 0000000000100000 00007f95d00f0000 joined      3
> 0000000000100000 0000000030000000 00007f95d0100000 joined      3
> 00000000fc000000 00000000fc800000 00007f960ac00000 added       4
> 00000000fffe0000 0000000100000000 00007f9618800000 added       5
> dumping range at 00007f95d0000000 for length 00000000000a0000
> dumping range at 00007f960ac00000 for length 0000000000010000
> dumping range at 00007f95d00c0000 for length 000000002ff40000
> dumping range at 00007f960ac00000 for length 0000000000800000
> dumping range at 00007f9618800000 for length 0000000000020000

- The vmcore was checked with "readelf", comparing the results against a
  vmcore written by qmp_dump_guest_memory():

> --- theirs      2013-09-12 17:38:59.797289404 +0200
> +++ mine        2013-09-12 17:39:03.820289404 +0200
> @@ -27,16 +27,16 @@
>    Type           Offset             VirtAddr           PhysAddr
>                   FileSiz            MemSiz              Flags  Align
>    NOTE           0x0000000000000190 0x0000000000000000 0x0000000000000000
> -                 0x0000000000000ca0 0x0000000000000ca0         0
> -  LOAD           0x0000000000000e30 0x0000000000000000 0x0000000000000000
> +                 0x000000000000001c 0x000000000000001c         0
> +  LOAD           0x00000000000001ac 0x0000000000000000 0x0000000000000000
>                   0x00000000000a0000 0x00000000000a0000         0
> -  LOAD           0x00000000000a0e30 0x0000000000000000 0x00000000000a0000
> +  LOAD           0x00000000000a01ac 0x0000000000000000 0x00000000000a0000
>                   0x0000000000010000 0x0000000000010000         0
> -  LOAD           0x00000000000b0e30 0x0000000000000000 0x00000000000c0000
> +  LOAD           0x00000000000b01ac 0x0000000000000000 0x00000000000c0000
>                   0x000000002ff40000 0x000000002ff40000         0
> -  LOAD           0x000000002fff0e30 0x0000000000000000 0x00000000fc000000
> +  LOAD           0x000000002fff01ac 0x0000000000000000 0x00000000fc000000
>                   0x0000000000800000 0x0000000000800000         0
> -  LOAD           0x00000000307f0e30 0x0000000000000000 0x00000000fffe0000
> +  LOAD           0x00000000307f01ac 0x0000000000000000 0x00000000fffe0000
>                   0x0000000000020000 0x0000000000020000         0
>
>  There is no dynamic section in this file.
> @@ -47,13 +47,6 @@
>
>  No version information found in this file.
>
> -Notes at offset 0x00000190 with length 0x00000ca0:
> +Notes at offset 0x00000190 with length 0x0000001c:
>    Owner                Data size       Description
> -  CORE         0x00000150      NT_PRSTATUS (prstatus structure)
> -  CORE         0x00000150      NT_PRSTATUS (prstatus structure)
> -  CORE         0x00000150      NT_PRSTATUS (prstatus structure)
> -  CORE         0x00000150      NT_PRSTATUS (prstatus structure)
> -  QEMU         0x000001b0      Unknown note type: (0x00000000)
> -  QEMU         0x000001b0      Unknown note type: (0x00000000)
> -  QEMU         0x000001b0      Unknown note type: (0x00000000)
> -  QEMU         0x000001b0      Unknown note type: (0x00000000)
> +  NONE         0x00000005      Unknown note type: (0x00000000)

- The vmcore was checked with "crash" too, again comparing the results
  against a vmcore written by qmp_dump_guest_memory():

> --- guest.vmcore.log2   2013-09-12 17:52:27.074289201 +0200
> +++ example.dump.log2   2013-09-12 17:52:15.904289203 +0200
> @@ -22,11 +22,11 @@
>  This GDB was configured as "x86_64-unknown-linux-gnu"...
>
>       KERNEL: /usr/lib/debug/lib/modules/2.6.32-358.el6.x86_64/vmlinux
> -    DUMPFILE: /home/lacos/tmp/guest.vmcore
> +    DUMPFILE: /home/lacos/tmp/example.dump
>          CPUS: 4
> -        DATE: Thu Sep 12 17:16:11 2013
> -      UPTIME: 00:01:09
> -LOAD AVERAGE: 0.07, 0.03, 0.00
> +        DATE: Thu Sep 12 17:17:41 2013
> +      UPTIME: 00:00:38
> +LOAD AVERAGE: 0.18, 0.05, 0.01
>         TASKS: 130
>      NODENAME: localhost.localdomain
>       RELEASE: 2.6.32-358.el6.x86_64
> @@ -38,12 +38,12 @@
>       COMMAND: "swapper"
>          TASK: ffffffff81a8d020  (1 of 4)  [THREAD_INFO: ffffffff81a00000]
>           CPU: 0
> -       STATE: TASK_RUNNING (PANIC)
> +       STATE: TASK_RUNNING (ACTIVE)
> +     WARNING: panic task not found
>
>  crash> bt
>  PID: 0      TASK: ffffffff81a8d020  CPU: 0   COMMAND: "swapper"
> - #0 [ffffffff81a01ed0] default_idle at ffffffff8101495d
> - #1 [ffffffff81a01ef0] cpu_idle at ffffffff81009fc6
> + #0 [ffffffff81a01ef0] cpu_idle at ffffffff81009fc6
>  crash> task ffffffff81a8d020
>  PID: 0      TASK: ffffffff81a8d020  CPU: 0   COMMAND: "swapper"
>  struct task_struct {
> @@ -75,7 +75,7 @@
>        prev = 0xffffffff81a8d080
>      },
>      on_rq = 0,
> -    exec_start = 8618466836,
> +    exec_start = 7469214014,
>      sum_exec_runtime = 0,
>      vruntime = 0,
>      prev_sum_exec_runtime = 0,
> @@ -149,7 +149,7 @@
>    },
>    tasks = {
>      next = 0xffff88002d621948,
> -    prev = 0xffff880029618f28
> +    prev = 0xffff880023b74488
>    },
>    pushable_tasks = {
>      prio = 140,
> @@ -165,7 +165,7 @@
>      }
>    },
>    mm = 0x0,
> -  active_mm = 0xffff88002929b780,
> +  active_mm = 0xffff8800297eb980,
>    exit_state = 0,
>    exit_code = 0,
>    exit_signal = 0,
> @@ -177,7 +177,7 @@
>    sched_reset_on_fork = 0,
>    pid = 0,
>    tgid = 0,
> -  stack_canary = 2483693585637059287,
> +  stack_canary = 7266362296181431986,
>    real_parent = 0xffffffff81a8d020,
>    parent = 0xffffffff81a8d020,
>    children = {
> @@ -224,14 +224,14 @@
>    set_child_tid = 0x0,
>    clear_child_tid = 0x0,
>    utime = 0,
> -  stime = 3,
> +  stime = 2,
>    utimescaled = 0,
> -  stimescaled = 3,
> +  stimescaled = 2,
>    gtime = 0,
>    prev_utime = 0,
>    prev_stime = 0,
>    nvcsw = 0,
> -  nivcsw = 1000,
> +  nivcsw = 1764,
>    start_time = {
>      tv_sec = 0,
>      tv_nsec = 0

- <name_dropping>I asked for Dave Anderson's help with verifying the
  extracted vmcore, and his comments make me think I should post
  this.</name_dropping>

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26 13:06:48 +02:00
Aurelien Jarno
2d23d5edb5 tcg/i386: cleanup useless #ifdef
TCG_TARGET_HAS_movcond_i32 is always defined to 1 in tcg-target.h, so
remove the corresponding #ifdef #endif sequence, left from a previous
refactoring.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-25 15:21:33 -08:00
Aurelien Jarno
085bb5bb64 tcg/i386: use movbe instruction in qemu_ldst routines
The movbe instruction has been added on some Intel Atom CPUs and on
recent Intel Haswell CPUs. It allows to load/store a value and at the
same time bswap it.

This patch detects the avaibility of this instruction and when available
use it in the qemu load/store routines in replacement of load/store +
bswap. Note that for 16-bit unsigned loads, movbe + movzw is basically the
same as movzw + bswap, so the patch doesn't touch this case.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[RTH: Reduced the number of conditionals using "movop".]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-25 15:19:19 -08:00
Aurelien Jarno
2a1137753f tcg/i386: add support for three-byte opcodes
Add support for three-byte opcodes, starting with the 0x0f 0x38 prefix.
Use P_EXT38 as the new constant, and shift all other constants so that
P_EXT and P_EXT38 have neighbouring values.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[RTH: Changed the name from P_EXT2 to P_EXT38.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-25 14:12:45 -08:00
Aurelien Jarno
c9d78213b8 tcg/i386: remove hardcoded P_REXW value
P_REXW is defined has a constant at the beginning of i386/tcg-target.c,
but the corresponding bit is later used in a harcoded way, which defeat
the purpose of a constant.

Fix that by using a conditional expression operator instead of a shift.
On x86 this actually makes the code slightly smaller as GCC does in
practice (opc >> 8) & 8 instead of (opc & 0x800) >> 8 so the constants
are smaller to load.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-25 14:12:38 -08:00
Aurelien Jarno
ba00599cc3 disas/i386.c: disassemble movbe instruction
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-01-25 14:12:17 -08:00
Anthony Liguori
0169c51155 Merge remote-tracking branch 'qemu-kvm/uq/master' into staging
* qemu-kvm/uq/master:
  kvm: always update the MPX model specific register
  KVM: fix addr type for KVM_IOEVENTFD
  KVM: Retry KVM_CREATE_VM on EINTR
  mempath prefault: fix off-by-one error
  kvm: x86: Separately write feature control MSR on reset
  roms: Flush icache when writing roms to guest memory
  target-i386: clear guest TSC on reset
  target-i386: do not special case TSC writeback
  target-i386: Intel MPX

Conflicts:
	exec.c

aliguori: fix trivial merge conflict in exec.c

Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24 15:52:44 -08:00
Anthony Liguori
1c51e68b18 Merge remote-tracking branch 'otubo/seccomp' into staging
* otubo/seccomp:
  seccomp: add some basic shared memory syscalls to the whitelist
  seccomp: add mkdir() and fchmod() to the whitelist

Message-id: 1390231004-18392-1-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24 15:52:16 -08:00
Anthony Liguori
7d64b2c2e2 Initial patch for QEMU GTK support on Windows
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJS3XsWAAoJEC+DHmz61iBpbSoH/05bF5kfogHUuqXdF/pGPB8H
 LmnaodaC0dnigKnEpwQrpiq5ZwkzRek4J35txrRKZcD+M5awjEnZEUJ9fP1sDTMi
 rxgewWIbUnISVtvw9pxz4CJumH3nRaVz7wmtcMd+4LNEuRhgwszfedDAQRLUKCmB
 xViGQeuauqUm0m12qx4F7rE7Dq5ru8uOl8Zf0u9QPpIreLmN8f/VZzE5NzApw0YV
 EZKpMsOPWs6mBUO978yjOH/wjncBoJp/dE2wkZm/LzCQtiNGMxTBlU7qvrxaID/O
 dVHtQGCRarStM3lkJhq3to3EXS9PtuLJ0zeWwAgncdGG+tw0becNfBEA4XLkudY=
 =CmlU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'sweil/tags/for_anthony' into staging

Initial patch for QEMU GTK support on Windows

# gpg: Signature made Mon 20 Jan 2014 11:37:58 AM PST using RSA key ID FAD62069
# gpg: Can't check signature: public key not found

* sweil/tags/for_anthony:
  gtk: Support keyboard translation for hosts running Windows

Message-id: 1390246909-18757-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24 15:52:09 -08:00
Anthony Liguori
14ac4febb2 hda-codec: disable streams on reset
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3kkoAAoJEEy22O7T6HE4WJ4QAJYlYsrVThAi9bnpFB7qLve+
 uP8MWwK+Wxc+O2CrN38BOoIyb273xk+U6Vj1FEfh9C1rN2dcZ4fBsUZfqqGEOYpM
 LNgFWzTUwIXDHnxVVc8Dyp+DyPbRd4CE+ii/ukY7Xq1QiHJmcdxweMPQnIZQl9UZ
 4wTWWubK1u/We+J87udQPfE3ZT2+5ndcbKM2FcCW3j8yBLvZav6/DNL6alr5eJ2L
 WGB8mOyCNu5hjaOWP1mya8cRHO6Z5IbFXqKNGU2m78C9WBO3LaZY7IL+s6mPvTzq
 0SaOk/XfK4XCwpgbvfFQ8lnJ5tdx4dagjGpwZOHPE2+Sy1l/XZztqr+caju/maqF
 PnRrosGUvYnVvPxPJKpN02mbohBizGUwL0nbal5Knx+2quQ+5sHnTJb3a3nonfuC
 /pfqvOD4thb3L7994RKu2bKfTq6TK0/n64JanmXADmEKebb3bb5AijFTModcMd8z
 uW4NejmpqsNYKXWUQ3WUktZWCEaNE7CbxTuxgr7DTSY0b2gl82cLiDS0ZAiJ4zGd
 ddwsvkEadIXHWbsdMMM3kCQQvlO/gVNYB7xozUPqOJdghlTSQAtkMi8ReR+Hxqq+
 PVS7dM276sPjRdqqaJSdk3JiE10NzUSKyBiJZtCZ5dqqIuHPlaHMgx77MzBwlVNK
 PkkqSNr9UpmwHu8WVGhC
 =yVv9
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kraxel/tags/pull-audio-2' into staging

hda-codec: disable streams on reset

# gpg: Signature made Tue 21 Jan 2014 02:17:12 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* kraxel/tags/pull-audio-2:
  hda-codec: disable streams on reset

Message-id: 1390299589-5082-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24 15:51:39 -08:00
Anthony Liguori
f4b27793a8 usb core+hid: add support for microsoft os descriptors
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3kopAAoJEEy22O7T6HE4PjkP/0NZqOSU3e9GmgeBfEpvgFfP
 4axBVEycXJtGc9nNfahmEIyUkk1+DMa8oMHnVSoVzelrdm2VNHs6qk9yC9EPa9YG
 HTXZuLvHbuIVL/NXY5b+loh4fOjbOPWEthdUd+RpNfH545Azoi2T/cYgtNz8BTyf
 eO3vCZy69NJjcsuk0zlRhEEAhnhKb+jkYgzARecL6JrAC7uuDrIhdz9peT1Du8k8
 lUnCLHFXrDaZUprkLrgvB+TTHJw9IgRq1g0gV20Gu+hDzBOJsG3cKXAl4X2b3lzO
 Ih+jcORu4ubURvOJSqTpcnObsQWKJHDR3sPeMAVD2ZzCd82ZOeH/+cEhfVBp+dZX
 qV2XbFU6yEiQBbzIuZEbsE4XWQVEAsfa8MaP/SdodJ4WueW21Rq8KDlnWzalPfDc
 T0hofDyLLcpkr2O3AM7OfBfLa37B4joV5FnuinvOo5r6byMMNgAYp7gbDVeIzEXJ
 Cs8N6KF0m8wX0KNyFms49VMTQnKm0MbuTYFbDBkW5jnxKHZ1ZLXdIP1HvYCvWp3w
 or0hxGze6Mrv8Aya9HUu7K0BEEbz8OLhVISkpOi35PGii2PcSm3lYHHhsohRYOcW
 EHilDyCn3Q20RkwcHi6YMy43T3eSJJnYwN4VWEb4lnDT5sjh/ehthxdtjCQHt8+f
 O1cBVvdDyh/BZt6SSuy8
 =sFbE
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kraxel/tags/pull-usb-2' into staging

usb core+hid: add support for microsoft os descriptors

# gpg: Signature made Tue 21 Jan 2014 02:21:29 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

* kraxel/tags/pull-usb-2:
  usb-hid: add microsoft os descriptor support
  usb: add support for microsoft os descriptors

Message-id: 1390299772-5368-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24 15:51:23 -08:00
Anthony Liguori
e9f526ab7b Merge remote-tracking branch 'bonzini/scsi-next' into staging
* bonzini/scsi-next:
  scsi: Support TEST UNIT READY in the dummy LUN0
  block: add .bdrv_reopen_prepare() stub for iscsi
  virtio-scsi: Prevent assertion on missed events
  virtio-scsi: Cleanup of I/Os that never started
  scsi: Assign cancel_io vector for scsi_disk_emulate_ops

Conflicts:
	block/iscsi.c

aliguori: resolve trivial merge conflict in block/iscsi.c

Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24 15:50:14 -08:00
Anthony Liguori
0d688cf7d8 Block patches
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJS4peVAAoJEH8JsnLIjy/WIfcP/0fezyrowrBSMNpqpbOI9bpy
 mjbo7tI1ZdvR2GlAsxZ8ollMNYtC611MHbnq48ywhRHJPMBPN9CYPJqwGtyzpA00
 f3gw2Lct9YMPRu0wiRclFaSSdPXVohqdL16AFRcsz8FVTD8MQkgAMu0q4+dHhs6p
 G2BvIyo3fjuS7jLJuXUmyyB4cOHI9/gw+B/ANF1BFWl0llcb5jLVxy44NGLwqovH
 Nxe4GbnMb6QYUhwibzGwMnImm8nrLHbocv0IMyX4zqBLap7BfQUJ9zs4kPUnd1rB
 /sB5dBKj5r7l8cuOyCZRkGo4gc1FyddjWlU5UpcqBuk92PXavsRM74C6H42CS3y1
 4pcEu0fAYBdfEaDAINUdbfT1eyMVjiNiFZT1NAgcz5JkTnuG3dThaDAKQEx7FCuq
 iP2n1nlpwSs9mzeifnZH6INyyEjoJzvBh3cIdBi3yEIJ4OVSLyrxi2djTEnRvAeh
 YXyMuJlscjelJpwsMCsWnkKp4vAuiXrefdQbKqZ9HwPD5oJmWi4PNvRndBiVj+Na
 CJfZROwAej3sAusUHbCB5pt5v+Fdb64bmTO5ph42ChnKIG9T2Piz2IQJPPTeVe9h
 cdtkd3tIV5xB6iXjy2xb4Y6y6Xqs1qEs91dyjQE1GszeBcairutwUmI0oYwHY5eJ
 tVyL8ptpNvfj9vKnDvE+
 =wLul
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging

Block patches

# gpg: Signature made Fri 24 Jan 2014 08:40:53 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found

* kwolf/tags/for-anthony: (93 commits)
  block: Switch bdrv_io_limits_intercept() to byte granularity
  qemu-iotests: Test pwritev RMW logic
  qemu-io: New command 'sleep'
  blkdebug: Make required alignment configurable
  iscsi: Set bs->request_alignment
  block: Make bdrv_pwrite() a bdrv_prwv_co() wrapper
  block: Make bdrv_pread() a bdrv_prwv_co() wrapper
  block: Change coroutine wrapper to byte granularity
  block: Assert serialisation assumptions in pwritev
  block: Align requests in bdrv_co_do_pwritev()
  block: Allow wait_serialising_requests() at any point
  block: Make overlap range for serialisation dynamic
  block: Generalise and optimise COR serialisation
  block: Make zero-after-EOF work with larger alignment
  block: Allow waiting for overlapping requests between begin/end
  block: Switch BdrvTrackedRequest to byte granularity
  block: Introduce bdrv_co_do_pwritev()
  block: write: Handle COR dependency after I/O throttling
  block: Introduce bdrv_aligned_pwritev()
  block: Introduce bdrv_co_do_preadv()
  ...

Message-id: 1390584136-24703-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24 15:43:30 -08:00
Kevin Wolf
d5103588aa block: Switch bdrv_io_limits_intercept() to byte granularity
Request sizes used to be rounded down to the next sector boundary,
allowing to bypass the I/O limit. Now all requests are accounted for
with their exact byte size.

Reported-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:28 +01:00
Kevin Wolf
9e1cb96d9a qemu-iotests: Test pwritev RMW logic
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:25 +01:00
Kevin Wolf
cd33d02a10 qemu-io: New command 'sleep'
There is no easy way to check that a request correctly waits for a
different request. With a sleep command we can at least approximate it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 17:40:03 +01:00
Kevin Wolf
b35ee7fb23 blkdebug: Make required alignment configurable
The new 'align' option of blkdebug can be used in order to emulate
backends with a required 4k alignment on hosts which only really require
512 byte alignment.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24 17:40:03 +01:00
Paolo Bonzini
2c9880c45e iscsi: Set bs->request_alignment
The iSCSI backend already gets the block size from the READ CAPACITY
command it sends.  Save it so that the generic block layer gets it
too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:03 +01:00
Kevin Wolf
8407d5d7e2 block: Make bdrv_pwrite() a bdrv_prwv_co() wrapper
Instead of implementing the alignment adjustment here, use the now
existing functionality of bdrv_co_do_pwritev().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:03 +01:00
Kevin Wolf
a3ef657185 block: Make bdrv_pread() a bdrv_prwv_co() wrapper
Instead of implementing the alignment adjustment here, use the now
existing functionality of bdrv_co_do_preadv().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:03 +01:00
Kevin Wolf
775aa8b6e0 block: Change coroutine wrapper to byte granularity
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:03 +01:00
Kevin Wolf
28de2dcd88 block: Assert serialisation assumptions in pwritev
If a request calls wait_serialising_requests() and actually has to wait
in this function (i.e. a coroutine yield), other requests can run and
previously read data (like the head or tail buffer) could become
outdated. In this case, we would have to restart from the beginning to
read in the updated data.

However, we're lucky and don't actually need to do that: A request can
only wait in the first call of wait_serialising_requests() because we
mark it as serialising before that call, so any later requests would
wait. So as we don't wait in practice, we don't have to reload the data.

This is an important assumption that may not be broken or data
corruption will happen. Document it with some assertions.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24 17:40:03 +01:00
Kevin Wolf
3b8242e0ea block: Align requests in bdrv_co_do_pwritev()
This patch changes bdrv_co_do_pwritev() to actually be what its name
promises. If requests aren't properly aligned, it performs a RMW.

Requests touching the same block are serialised against the RMW request.
Further optimisation of this is possible by differentiating types of
requests (concurrent reads should actually be okay here).

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Kevin Wolf
6460440f34 block: Allow wait_serialising_requests() at any point
We can only have a single wait_serialising_requests() call per request
because otherwise we can run into deadlocks where requests are waiting
for each other. The same is true when wait_serialising_requests() is not
at the very beginning of a request, so that other requests can be issued
between the start of the tracking and wait_serialising_requests().

Fix this by changing wait_serialising_requests() to ignore requests that
are already (directly or indirectly) waiting for the calling request.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Kevin Wolf
7327145f63 block: Make overlap range for serialisation dynamic
Copy on Read wants to serialise with all requests touching the same
cluster, so wait_serialising_requests() rounded to cluster boundaries.
Other users like alignment RMW will have different requirements, though
(requests touching the same sector), so make it dynamic.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Kevin Wolf
2dbafdc012 block: Generalise and optimise COR serialisation
Change the API so that specific requests can be marked serialising. Only
these requests are checked for overlaps then.

This means that during a Copy on Read operation, not all requests
overlapping other requests are serialised any more, but only those that
actually overlap with the specific COR request.

Also remove COR from function and variable names because this
functionality can be useful in other contexts.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Kevin Wolf
ec746e10cb block: Make zero-after-EOF work with larger alignment
Odd file sizes could make bdrv_aligned_preadv() shorten the request in
non-aligned ways. Fix it by rounding to the required alignment instead
of 512 bytes.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Kevin Wolf
65afd211c7 block: Allow waiting for overlapping requests between begin/end
Previously, it was not possible to use wait_for_overlapping_requests()
between tracked_request_begin()/end() because it would wait for itself.

Ignore the current request in the overlap check and run more of the
bdrv_co_do_preadv/pwritev code with a BdrvTrackedRequest present.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00
Kevin Wolf
793ed47a7a block: Switch BdrvTrackedRequest to byte granularity
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24 17:40:02 +01:00