Setup Data Object Exchange (DOE) as an extended capability for the NVME
controller and connect SPDM to it (CMA) to it.
Signed-off-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20240703092027.644758-4-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add all of the defined protocols/features from the PCIe-SIG r6.0
"Table 6-32 PCI-SIG defined Data Object Types (Vendor ID = 0001h)"
table.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Message-Id: <20240703092027.644758-2-alistair.francis@wdc.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we have switched to PCIIOMMUOps to convey host IOMMU information,
the host reserved regions are transmitted when the PCIe topology is
built. This happens way before the virtio-iommu driver calls the probe
request. So let's remove the probe_done flag that allowed to check
the probe was not done before the IOMMU MR got enabled. Besides this
probe_done flag had a flaw wrt migration since it was not saved/restored.
The only case at risk is if 2 devices were plugged to a
PCIe to PCI bridge and thus aliased. First of all we
discovered in the past this case was not properly supported for
neither SMMU nor virtio-iommu on guest kernel side: see
[RFC] virtio-iommu: Take into account possible aliasing in virtio_iommu_mr()
https://lore.kernel.org/all/20230116124709.793084-1-eric.auger@redhat.com/
If this were supported by the guest kernel, it is unclear what the call
sequence would be from a virtio-iommu driver point of view.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Message-Id: <20240716094619.1713905-3-eric.auger@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtual CPU Hot-unplug leads to unrealization of a CPU object. This also
involves destruction of the CPU AddressSpace. Add common function to help
destroy the CPU AddressSpace.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-7-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CPUs Control device(\\_SB.PCI0) register interface for the x86 arch is IO port
based and existing CPUs AML code assumes _CRS objects would evaluate to a system
resource which describes IO Port address. But on ARM arch CPUs control
device(\\_SB.PRES) register interface is memory-mapped hence _CRS object should
evaluate to system resource which describes memory-mapped base address. Update
build CPUs AML function to accept both IO/MEMORY region spaces and accordingly
update the _CRS object.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-6-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
OSPM evaluates _EVT method to map the event. The CPU hotplug event eventually
results in start of the CPU scan. Scan figures out the CPU and the kind of
event(plug/unplug) and notifies it back to the guest. Update the GED AML _EVT
method with the call to method \\_SB.CPUS.CSCN (via \\_SB.GED.CSCN)
Architecture specific code [1] might initialize its CPUs AML code by calling
common function build_cpus_aml() like below for ARM:
build_cpus_aml(scope, ms, opts, xx_madt_cpu_entry, memmap[VIRT_CPUHP_ACPI].base,
"\\_SB", "\\_SB.GED.CSCN", AML_SYSTEM_MEMORY);
[1] https://lore.kernel.org/qemu-devel/20240613233639.202896-13-salil.mehta@huawei.com/
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-5-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI GED (as described in the ACPI 6.4 spec) uses an interrupt listed in the
_CRS object of GED to intimate OSPM about an event. Later then demultiplexes the
notified event by evaluating ACPI _EVT method to know the type of event. Use
ACPI GED to also notify the guest kernel about any CPU hot(un)plug events.
Note, GED interface is used by many hotplug events like memory hotplug, NVDIMM
hotplug and non-hotplug events like system power down event. Each of these can
be selected using a bit in the 32 bit GED IO interface. A bit has been reserved
for the CPU hotplug event.
ACPI CPU hotplug related initialization should only happen if ACPI_CPU_HOTPLUG
support has been enabled for particular architecture. Add cpu_hotplug_hw_init()
stub to avoid compilation break.
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Reviewed-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240716111502.202344-4-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
CPU ctrl-dev MMIO region length could be used in ACPI GED and various other
architecture specific places. Move ACPI_CPU_HOTPLUG_REG_LEN macro to more
appropriate common header file.
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Tested-by: Vishnu Pajjuri <vishnu@os.amperecomputing.com>
Tested-by: Xianglai Li <lixianglai@loongson.cn>
Tested-by: Miguel Luis <miguel.luis@oracle.com>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240716111502.202344-3-salil.mehta@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently QEMU describes initial[1] RAM* in SMBIOS as a series of
virtual DIMMs (capped at 16Gb max) using type 17 structure entries.
Which is fine for the most cases. However when starting guest
with terabytes of RAM this leads to too many memory device
structures, which eventually upsets linux kernel as it reserves
only 64K for these entries and when that border is crossed out
it runs out of reserved memory.
Instead of partitioning initial RAM on 16Gb DIMMs, use maximum
possible chunk size that SMBIOS spec allows[2]. Which lets
encode RAM in lower 31 bits of 32bit field (which amounts upto
2047Tb per DIMM).
As result initial RAM will generate only one type 17 structure
until host/guest reach ability to use more RAM in the future.
Compat changes:
We can't unconditionally change chunk size as it will break
QEMU<->guest ABI (and migration). Thus introduce a new machine
class field that would let older versioned machines to use
legacy 16Gb chunks, while new(er) machine type[s] use maximum
possible chunk size.
PS:
While it might seem to be risky to rise max entry size this large
(much beyond of what current physical RAM modules support),
I'd not expect it causing much issues, modulo uncovering bugs
in software running within guest. And those should be fixed
on guest side to handle SMBIOS spec properly, especially if
guest is expected to support so huge RAM configs.
In worst case, QEMU can reduce chunk size later if we would
care enough about introducing a workaround for some 'unfixable'
guest OS, either by fixing up the next machine type or
giving users a CLI option to customize it.
1) Initial RAM - is RAM configured with help '-m SIZE' CLI option/
implicitly defined by machine. It doesn't include memory
configured with help of '-device' option[s] (pcdimm,nvdimm,...)
2) SMBIOS 3.1.0 7.18.5 Memory Device — Extended Size
PS:
* tested on 8Tb host with RHEL6 guest, which seems to parse
type 17 SMBIOS table entries correctly (according to 'dmidecode').
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240715122417.4059293-1-imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allow user to attach SR-IOV VF to a virtio-pci PF.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-6-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
A user can create a SR-IOV device by specifying the PF with the
sriov-pf property of the VFs. The VFs must be added before the PF.
A user-creatable VF must have PCIDeviceClass::sriov_vf_user_creatable
set. Such a VF cannot refer to the PF because it is created before the
PF.
A PF that user-creatable VFs can be attached calls
pcie_sriov_pf_init_from_user_created_vfs() during realization and
pcie_sriov_pf_exit() when exiting.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240715-sriov-v5-5-3f5539093ffc@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Extend the virtio device property definitions to include the
VIRTIO_F_IN_ORDER feature.
The default state of this feature is disabled, allowing it to be
explicitly enabled where it's supported.
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-7-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the boolean 'in_order_filled' member to the VirtQueueElement structure.
The use of this boolean will signify whether the element has been processed
and is ready to be flushed (so long as the element is in-order). This
boolean is used to support the VIRTIO_F_IN_ORDER feature.
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240710125522.4168043-2-jonah.palmer@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement transfer and activate functionality per 3.1 spec for
supporting update metadata (no actual buffers). Transfer times
are arbitrarily set to ten and two seconds for full and part
transfers, respectively.
cxl update-firmware mem0 -F fw.img
<on-going fw update>
cxl update-firmware mem0
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"fw_update_in_progress":true,
"remaining_size":22400
}
}
<completed fw update>
cxl update-firmware mem0
{
"memdev":"mem0",
"pmem_size":"1024.00 MiB (1073.74 MB)",
"serial":"0",
"host":"0000:0d:00.0",
"firmware":{
"num_slots":2,
"active_slot":1,
"staged_slot":2,
"online_activate_capable":true,
"slot_1_version":"BWFW VERSION 0",
"slot_2_version":"BWFW VERSION 1",
"fw_update_in_progress":false
}
}
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20240627164912.25630-1-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705125915.991672-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.2 describes the DDR5 Error Check Scrub (ECS)
control feature.
The Error Check Scrub (ECS) is a feature defined in JEDEC DDR5 SDRAM
Specification (JESD79-5) and allows the DRAM to internally read, correct
single-bit errors, and write back corrected data bits to the DRAM array
while providing transparency to error counts. The ECS control feature
allows the request to configure ECS input configurations during system
boot or at run-time.
The ECS control allows the requester to change the log entry type, the ECS
threshold count provided that the request is within the definition
specified in DDR5 mode registers, change mode between codeword mode and
row count mode, and reset the ECS counter.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-4-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.9.11.1 describes the device patrol scrub control
feature. The device patrol scrub proactively locates and makes corrections
to errors in regular cycle. The patrol scrub control allows the request to
configure patrol scrub input configurations.
The patrol scrub control allows the requester to specify the number of
hours for which the patrol scrub cycles must be completed, provided that
the requested number is not less than the minimum number of hours for the
patrol scrub cycle that the device is capable of. In addition, the patrol
scrub controls allow the host to disable and enable the feature in case
disabling of the feature is needed for other purposes such as
performance-aware operations which require the background operations to be
turned off.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-3-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
CXL spec 3.1 section 8.2.9.6 describes optional device specific features.
CXL devices supports features with changeable attributes.
Get Supported Features retrieves the list of supported device specific
features. The settings of a feature can be retrieved using Get Feature and
optionally modified using Set Feature.
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://lore.kernel.org/r/20240223085902.1549-2-shiju.jose@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Preparation for allowing devices to define their own CCI commands
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20230906001517.324380-2-gregory.price@memverge.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705123039.963781-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Iterate over the list keeping the output payload size into account,
returning the results from a previous scan media operation. The
scan media operation does not fail prematurely due to device being
out of storage, so this implementation does not deal with the
retry/restart functionality.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-5-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-5-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL r3.1 Section 8.2.9.9.5.1: Sanitize (Opcode 4400h), the
sanitize command should delete all event logs. Introduce
cxl_discard_all_event_logs() and call
this in __do_sanitization().
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20231222090051.3265307-5-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-4-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The spec states that reads/writes should have no effect and a part of
commands should be ignored when the media is disabled, not when the
sanitize command is running.
Introduce cxl_dev_media_disabled() to check if the media is disabled and
replace sanitize_running() with it.
Make sure that the media has been correctly disabled during sanitation
by adding an assert to __toggle_media(). Now, enabling when already
enabled or vice versa results in an assert() failure.
Suggested-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Link: https://lore.kernel.org/r/20231222090051.3265307-4-42.hyeyoo@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-3-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use simple heuristics to determine the cost of scanning any given
chunk, assuming cost is equal across the whole device, without
differentiating between volatile or persistent partitions. This
is aligned to the fact that these constraints are not enforced
in respective poison query commands.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/r/20230908073152.4386-3-dave@stgolabs.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20240705120643.959422-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the datasheet of ASPEED SOCs,
each I2C bus has their own pool buffer since AST2500.
Only AST2400 utilized a pool buffer share to all I2C bus.
And firmware required to set the offset of pool buffer
by writing "Function Control Register(I2CD 00)"
To make this model more readable, will change to introduce
a new bus pool buffer attribute in AspeedI2Cbus.
So, it does not need to calculate the pool buffer offset
for different I2C bus.
This patch rename the I2C class pool attribute to share_pool.
It make user more understand share pool and bus pool
are different.
Incrementing the version of aspeed_i2c_vmstate to 3.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
an I2C controller owns 8KB of register space for AST2700,
owns 4KB of register space for AST2600, AST2500 and AST2400,
and owns 64KB of register space for AST1030.
It set the memory region size 4KB by default and it does not compatible
register space for AST2700.
Introduce a new class attribute to set the I2C controller memory size
for different ASPEED SOCs.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
AST2700 and AST2600 ADC controllers are identical.
Introduce ast2700 class and set 2 engines.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Report support on the AST2600 SoC if the boot-from-eMMC HW strapping
bit is set at the board level. AST2700 also has support but it is not
yet ready in QEMU and others SoCs do not have support, so return false
always for these.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images
specially built for this purpose.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
loongarch added a common library for edk2 to
parse flash base addresses through fdt.
For compatibility with other architectures,
the flash block size in qemu is now changed to 256k.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240624033319.999631-1-lixianglai@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Remove extioi INT_encode encode mode, because we don't emulate it.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240718083254.748179-1-gaosong@loongson.cn>
Some commands need rework for nesting, as they used to assume S1
and S2 are mutually exclusive:
- CMD_TLBI_NH_ASID: Consider VMID if stage-2 is supported
- CMD_TLBI_NH_ALL: Consider VMID if stage-2 is supported, otherwise
invalidate everything, this required a new vmid invalidation
function for stage-1 only (ASID >= 0)
Also, rework trace events to reflect the new implementation.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-15-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, Instead of doing TLB invalidation by ASID only, VMID will be
also required.
Add smmu_iotlb_inv_asid_vmid() which invalidates by both ASID and VMID.
However, at the moment this function is only used in SMMU_CMD_TLBI_NH_ASID
which is a stage-1 command, so passing VMID = -1 keeps the original
behaviour.
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-14-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
With nesting, we would need to invalidate IPAs without
over-invalidating stage-1 IOVAs. This can be done by
distinguishing IPAs in the TLBs by having ASID=-1.
To achieve that, rework the invalidation for IPAs to have a
separate function, while for IOVA invalidation ASID=-1 means
invalidate for all ASIDs.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-13-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When nested translation is requested, do the following:
- Translate stage-1 table address IPA into PA through stage-2.
- Translate stage-1 table walk output (IPA) through stage-2.
- Create a single TLB entry from stage-1 and stage-2 translations
using logic introduced before.
smmu_ptw() has a new argument SMMUState which include the TLB as
stage-1 table address can be cached in there.
Also in smmu_ptw(), a separate path used for nesting to simplify the
code, although some logic can be combined.
With nested translation class of translation fault can be different,
from the class of the translation, as faults from translating stage-1
tables are considered as CLASS_TT and not CLASS_IN, a new member
"is_ipa_descriptor" added to "SMMUPTWEventInfo" to differ faults
from walking stage 1 translation table and faults from translating
an IPA for a transaction.
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-12-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for nested (combined) TLB entries.
The main function combine_tlb() is not used here but in the next
patches, but to simplify the patches it is introduced first.
Main changes:
1) New field added in the SMMUTLBEntry struct: parent_perm, for
nested TLB, holds the stage-2 permission, this can be used to know
the origin of a permission fault from a cached entry as caching
the “and” of the permissions loses this information.
SMMUPTWEventInfo is used to hold information about PTW faults so
the event can be populated, the value of stage used to be set
based on the current stage for TLB permission faults, however
with the parent_perm, it is now set based on which perm has
the missing permission
When nesting is not enabled it has the same value as perm which
doesn't change the logic.
2) As combined TLB implementation is used, the combination logic
chooses:
- tg and level from the entry which has the smallest addr_mask.
- Based on that the iova that would be cached is recalculated.
- Translated_addr is chosen from stage-2.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-11-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Soon, smmuv3_do_translate() will be used to translate the CD and the
TTBx, instead of re-writting the same logic to convert the returned
cached entry to an address, add a new macro CACHED_ENTRY_TO_ADDR.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-8-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ASID and VMID used to be uint16_t in the translation config, however,
in other contexts they can be int as -1 in case of TLB invalidation,
to represent all (don’t care).
When stage-2 was added asid was set to -1 in stage-2 and vmid to -1
in stage-1 configs. However, that meant they were set as (65536),
this was not an issue as nesting was not supported and no
commands/lookup uses both.
With nesting, it’s critical to get this right as translation must be
tagged correctly with ASID/VMID, and with ASID=-1 meaning stage-2.
Represent ASID/VMID everywhere as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-7-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
smmuv3_translate() does everything from STE/CD parsing to TLB lookup
and PTW.
Soon, when nesting is supported, stage-1 data (tt, CD) needs to be
translated using stage-2.
Split smmuv3_translate() to 3 functions:
- smmu_translate(): in smmu-common.c, which does the TLB lookup, PTW,
TLB insertion, all the functions are already there, this just puts
them together.
This also simplifies the code as it consolidates event generation
in case of TLB lookup permission failure or in TT selection.
- smmuv3_do_translate(): in smmuv3.c, Calls smmu_translate() and does
the event population in case of errors.
- smmuv3_translate(), now calls smmuv3_do_translate() for
translation while the rest is the same.
Also, add stage in trace_smmuv3_translate_success()
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240715084519.1189624-6-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently, translation stage is represented as an int, where 1 is stage-1 and
2 is stage-2, when nested is added, 3 would be confusing to represent nesting,
so we use an enum instead.
While keeping the same values, this is useful for:
- Doing tricks with bit masks, where BIT(0) is stage-1 and BIT(1) is
stage-2 and both is nested.
- Tracing, as stage is printed as int.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-id: 20240715084519.1189624-5-smostafa@google.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
=cZhV
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* target/i386/tcg: fixes for seg_helper.c
* SEV: Don't allow automatic fallback to legacy KVM_SEV_INIT,
but also don't use it by default
* scsi: honor bootindex again for legacy drives
* hpet, utils, scsi, build, cpu: miscellaneous bugfixes
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaWoP0UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroOqfggAg3jxUp6B8dFTEid5aV6qvT4M6nwD
# TAYcAl5kRqTOklEmXiPCoA5PeS0rbr+5xzWLAKgkumjCVXbxMoYSr0xJHVuDwQWv
# XunUm4kpxJBLKK3uTGAIW9A21thOaA5eAoLIcqu2smBMU953TBevMqA7T67h22rp
# y8NnZWWdyQRH0RAaWsCBaHVkkf+DuHSG5LHMYhkdyxzno+UWkTADFppVhaDO78Ba
# Egk49oMO+G6of4+dY//p1OtAkAf4bEHePKgxnbZePInJrkgHzr0TJWf9gERWFzdK
# JiM0q6DeqopZm+vENxS+WOx7AyDzdN0qOrf6t9bziXMg0Rr2Z8bu01yBCQ==
# =cZhV
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 02:34:05 AM AEST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
target/i386/tcg: save current task state before loading new one
target/i386/tcg: use X86Access for TSS access
target/i386/tcg: check for correct busy state before switching to a new task
target/i386/tcg: Compute MMU index once
target/i386/tcg: Introduce x86_mmu_index_{kernel_,}pl
target/i386/tcg: Reorg push/pop within seg_helper.c
target/i386/tcg: use PUSHL/PUSHW for error code
target/i386/tcg: Allow IRET from user mode to user mode with SMAP
target/i386/tcg: Remove SEG_ADDL
target/i386/tcg: fix POP to memory in long mode
hpet: fix HPET_TN_SETVAL for high 32-bits of the comparator
hpet: fix clamping of period
docs: Update description of 'user=username' for '-run-with'
qemu/timer: Add host ticks function for LoongArch
scsi: fix regression and honor bootindex again for legacy drives
hw/scsi/lsi53c895a: bump instruction limit in scripts processing to fix regression
disas: Fix build against Capstone v6
cpu: Free queued CPU work
Revert "qemu-char: do not operate on sources from finalize callbacks"
i386/sev: Don't allow automatic fallback to legacy KVM_SEV*_INIT
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
-----BEGIN PGP SIGNATURE-----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=m52p
-----END PGP SIGNATURE-----
Merge tag 'sdmmc-20240716' of https://github.com/philmd/qemu into staging
SD/MMC patches queue
Addition of eMMC support is a long-term collaborative virtual work by:
- Cédric Le Goater
- Edgar E. Iglesias
- Francisco Iglesias
- Joel Stanley
- Luc Michel
- Philippe Mathieu-Daudé
- Sai Pavan Boddu
- Vincent Palatin
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaWvlEACgkQ4+MsLN6t
# wN7p7hAAj6JV3fIg1iKBR49asQVzU3/nYRIlWnp6QsLRGX+qwjMnuMzlvpinTtq4
# SJZobw1OJp/2LNaEGqAqNHqBpwAPibUnkei0pd1Y+v6Cyywo7X5Y1hRvQf46Ezqm
# u2FxsAfWc4cQs+sFrbNq/v7X2+R6VmChkA+EVc4cB0gwMOjvtg8RQObdhKr7Y6UX
# b9KvRDSNMH75ht39RD/smtcn/kprkkTQYo/ciBbVWdnBMiKuhN0qLXbKnZu9lMs4
# Ru29ypT+98pL1E/4YbgNcLGYXHjKrSIpD3+DEvmWe09LdG2+YMASv7do3iKfAYN5
# KdQ9BNZxYrpmeDAiyL521pODsgvU/wDDdbK0xUztPqcHhpYkvcfYWdzO8wr28Ib0
# wOEA0+xzveeD+1ZKjilbZ6tKzsRrKgv1O8j1T8rXab2/3mjrW2R5G/5y4bpM8E4h
# KuqGwC2YjWsJi3CwRL5Cvu5YBsiyYF7mk0zTKK2qwO87B7Pa0PJ3Y9x0xIWm4blp
# RoZ1SaCChH3M1hKK3jDjrIutXrZG8CzHpe17QjTQeUxo+/wX3VfDYbXasTe1orFu
# +JkUBU+xZ6m1+dWAa22H5KbeY8wd99p6w+ChnVmS15WqVK8i2e4gfTsKGh7Idt3t
# Vf4CaCD/2vRtKo4AN+YNDUg1DWV89zXRbnkR5oWUWG3Fda5Qo3k=
# =m52p
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 17 Jul 2024 04:39:13 AM AEST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240716' of https://github.com/philmd/qemu:
hw/sd/sdcard: Support boot area in emmc image
hw/sd/sdcard: Add mmc SWITCH function support (CMD6)
hw/sd/sdcard: Add eMMC 'boot-partition-size' property
hw/sd/sdcard: Add emmc_cmd_SEND_EXT_CSD handler (CMD8)
hw/sd/sdcard: Implement eMMC sleep state (CMD5)
hw/sd/sdcard: Add emmc_cmd_PROGRAM_CID handler (CMD26)
hw/sd/sdcard: Fix SET_BLOCK_COUNT command argument on eMMC (CMD23)
hw/sd/sdcard: Add emmc_cmd_SET_RELATIVE_ADDR handler (CMD3)
hw/sd/sdcard: Register unimplemented command handlers
hw/sd/sdcard: Register generic command handlers
hw/sd/sdcard: Basis for eMMC support
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since eMMC are soldered on boards, it is not user-creatable.
RCA register is initialized to 0x0001, per spec v4.3,
chapter 8.5 "RCA register":
The default value of the RCA register is 0x0001.
The value 0x0000 is reserved to set all cards into
the Stand-by State with CMD7.
The CSD register is very similar to SD one, except
the version announced is v4.3.
eMMC CID register is slightly different from SD:
- One extra PNM (5 -> 6)
- MDT is only 1 byte (2 -> 1).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-2-philmd@linaro.org>
This factors the CPU pause function from pause_all_vcpus() into a
new cpu_pause() function, similarly to cpu_resume(). cpu_resume()
is moved to keep it next to cpu_pause().
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20240712120247.477133-17-npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
load_image_gzipped() does not seem to be used anywhere. Remove it.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240711072448.32673-1-anisinha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The doc comments for the functions for named GPIO inputs and
outputs had a couple of problems:
* some copy-and-paste errors meant the qdev_connect_gpio_out_named()
doc comment had references to input GPIOs that should be to
output GPIOs
* it wasn't very clear that named GPIOs are arrays and so the
connect functions specify a single GPIO line by giving both
the name of the array and the index within that array
Fix the copy-and-paste errors and slightly expand the text
to say that functions are connecting one line in a named GPIO
array, not a single named GPIO line.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240708153312.3109380-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Running qemu-system-aarch64 -M virt -nographic and terminating it will
result in a LeakSanitizer error due to remaining queued CPU work so
free it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Link: https://lore.kernel.org/r/20240714-cpu-v1-1-19c2f8de2055@daynix.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Up until now, the EXTI implementation had 16 inbound GPIOs connected to
the 16 outbound GPIOs of STM32L4x5 SYSCFG.
The EXTI actually handles 40 lines (namely 5 from STM32L4x5 USART
devices which are already implemented in QEMU).
In order to connect USART devices to EXTI, this commit consolidates
constants `EXTI_NUM_INTERRUPT_OUT_LINES` (40) and
`EXTI_NUM_GPIO_EVENT_IN_LINES` (16) into `EXTI_NUM_LINES` (40).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240707085927.122867-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all targets set TCGCPUOps::cpu_exec_halt, we can make it
mandatory and remove the fallback handling that calls cpu_has_work.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* support AST2700 network
-----BEGIN PGP SIGNATURE-----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=UygB
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu into staging
aspeed queue:
* support AST2700 network
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaNJCcACgkQUaNDx8/7
# 7KF7pw//So48XdPJhdQukO/PDLGSYL8rRjDfZbQFLLw10MozcZZ/Nz/BCzrNxJRg
# rHP/shyO3XL1YZ6U1LNXk6E845giVriSpRRjGX9CuK4fypM9xom6qAIOtOLeH7hG
# iTMW++IxN/JgVmVOKYn3C+2+odiq6NzZxFrblVtGPUDtNkkC9BaYGHnccMsl5zQh
# LOSPJxqLiiuDjZPqdwa4fMbtEeNTU3A0WLlWxX7yPfJt2T20a4wE6bdWVGcI6fiV
# QbCmLLrMXhuZFx+uT4B2hbHi+hGS5H+F3QBOefum6z+i9NEbfAZSyusd8/qTEify
# fSBqxL4LD6K4WKL1Hg9959cBcm5zWgPXk7znus4E/TZuUTdSHaPC7clESIcYqWPS
# veEAppmHneO4cdmK1m+Gv4gpWD/adS4ZfV7O+C3z149ms0gL4JrK6QndPdE5QuIW
# u47PhIT3oIM0WznnMusoCndFxs6Gl/GBkzdxW0gdoJKBRfymbsroWeZamAWTznbV
# mL8Td8bEP/NcV40cm1PtpZyl7j0MzxcKDUHKv9ioQTXLUpkl5LSsIGmd1m78WRlE
# J6bUJ3jqQT6/s5i3TVqTGe7xuqMkg+9Er8rn5nAWgSronsf4nprAfOU8Lj+b06BM
# YRroGgU2lAQrv17liQExrG3Tj1SH+oEp1q0qEq7qo824HlGjBkI=
# =UygB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 09 Jul 2024 04:51:03 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu:
machine_aspeed.py: update to test network for AST2700
machine_aspeed.py: update to test ASPEED OpenBMC SDK v09.02 for AST2700
hw/block: m25p80: support quad mode for w25q01jvq
aspeed/soc: set dma64 property for AST2700 ftgmac100
hw/net:ftgmac100: update TX and RX packet buffers address to 64 bits
hw/net:ftgmac100: introduce TX and RX ring base address high registers to support 64 bits
hw/net:ftgmac100: update ring base address to 64 bits
hw/net:ftgmac100: update memory region size to 64KB
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This callback will be used to retrieve the page size mask supported
along a given Host IOMMU device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Introduce vfio_container_get_iova_ranges() to retrieve the usable
IOVA regions of the base container and use it in the Host IOMMU
device implementations of get_iova_ranges() callback.
We also fix a UAF bug as the list was shallow copied while
g_list_free_full() was used both on the single call site, in
virtio_iommu_set_iommu_device() but also in
vfio_container_instance_finalize(). Instead use g_list_copy_deep.
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "Normal Priority Transmit Ring Base Address Register High(0x17C)",
"High Priority Transmit Ring Base Address Register High(0x184)" and
"Receive Ring Base Address Register High(0x18C)" to save the high part physical
address of descriptor manager.
Ex: TX descriptor manager address [34:0]
The "Normal Priority Transmit Ring Base Address Register High(0x17C)"
bits [2:0] which corresponds the bits [34:32] of the 64 bits address of
the TX ring buffer address.
The "Normal Priority Transmit Ring Base Address Register(0x20)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the TX ring buffer address.
Introduce a new sub region which size is 0x100 for the set of new registers
and map it at 0x100 in the container region.
This sub region range is from 0x100 to 0x1ff.
Introduce a new property and object attribute to activate the region for new registers.
Introduce a new memop handlers for the new register read and write.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Update TX and RX ring base address data type to uint64_t for
64 bits dram address DMA support.
Both "Normal Priority Transmit Ring Base Address Register(0x20)" and
"Receive Ring Base Address Register (0x24)" are used for saving the
low part physical address of descriptor manager.
Therefore, changes to set TX and RX descriptor manager address bits [31:0]
in ftgmac100_read and ftgmac100_write functions.
Incrementing the version of vmstate to 2.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
According to the datasheet of ASPEED SOCs,
one MAC controller owns 128KB of register space for AST2500.
However, one MAC controller only owns 64KB of register space for AST2600
and AST2700. It set the memory region size 128KB and it occupied another
controllers Address Spaces.
Update one MAC controller memory region size to 0x1000
because AST2500 did not use register spaces over than 64KB.
Introduce a new container region size to 0x1000 and its range
is from 0 to 0xfff. This container is mapped a sub region
for the current set of register.
This sub region range is from 0 to 0xff.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
In preparation of introducing eMMC support which have
different CSD/CID structures, introduce a pair of handlers
in SDCardClass.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-82-philmd@linaro.org>
All handlers using the 'sd_none' enum got converted,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-76-philmd@linaro.org>
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
=p9h4
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio: features,fixes
A bunch of improvements:
- vhost dirty log is now only scanned once, not once per device
- virtio and vhost now support VIRTIO_F_NOTIFICATION_DATA
- cxl gained DCD emulation support
- pvpanic gained shutdown support
- beginning of patchset for Generic Port Affinity Structure
- s3 support
- friendlier error messages when boot fails on some illegal configs
- for vhost-user, VHOST_USER_SET_LOG_BASE is now only sent once
- part of vhost-user support for any POSIX system -
not yet enabled due to qtest failures
- sr-iov VF setup code has been reworked significantly
- new tests, particularly for risc-v ACPI
- bugfixes
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmaF068PHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp+DMIAMC//mBXIZlPprfhb5cuZklxYi31Acgu5TUr
# njqjCkN+mFhXXZuc3B67xmrQ066IEPtsbzCjSnzuU41YK4tjvO1g+LgYJBv41G16
# va2k8vFM5pdvRA+UC9li1CCIPxiEcszxOdzZemj3szWLVLLUmwsc5OZLWWeFA5m8
# vXrrT9miODUz3z8/Xn/TVpxnmD6glKYIRK/IJRzzC4Qqqwb5H3ji/BJV27cDUtdC
# w6ns5RYIj5j4uAiG8wQNDggA1bMsTxFxThRDUwxlxaIwAcexrf1oRnxGRePA7PVG
# BXrt5yodrZYR2sR6svmOOIF3wPMUDKdlAItTcEgYyxaVo5rAdpc=
# =p9h4
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 03 Jul 2024 03:41:51 PM PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (85 commits)
hw/pci: Replace -1 with UINT32_MAX for romsize
pcie_sriov: Register VFs after migration
pcie_sriov: Remove num_vfs from PCIESriovPF
pcie_sriov: Release VFs failed to realize
pcie_sriov: Reuse SR-IOV VF device instances
pcie_sriov: Ensure VF function number does not overflow
pcie_sriov: Do not manually unrealize
hw/ppc/spapr_pci: Do not reject VFs created after a PF
hw/ppc/spapr_pci: Do not create DT for disabled PCI device
hw/pci: Rename has_power to enabled
virtio-iommu: Clear IOMMUDevice when VFIO device is unplugged
virtio: remove virtio_tswap16s() call in vring_packed_event_read()
hw/cxl/events: Mark cxl-add-dynamic-capacity and cxl-release-dynamic-capcity unstable
hw/cxl/events: Improve QMP interfaces and documentation for add/release dynamic capacity.
tests/data/acpi/rebuild-expected-aml.sh: Add RISC-V
pc-bios/meson.build: Add support for RISC-V in unpack_edk2_blobs
meson.build: Add RISC-V to the edk2-target list
tests/data/acpi/virt: Move ARM64 ACPI tables under aarch64/${machine} path
tests/data/acpi: Move x86 ACPI tables under x86/${machine} path
tests/qtest/bios-tables-test.c: Set "arch" for x86 tests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
pcie_sriov doesn't have code to restore its state after migration, but
igb, which uses pcie_sriov, naively claimed its migration capability.
Add code to register VFs after migration and fix igb migration.
Fixes: 3a977deebe ("Intrdocue igb device emulation")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-9-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
num_vfs is not migrated so use PCI_SRIOV_CTRL_VFE and PCI_SRIOV_NUM_VF
instead.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-8-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Disable SR-IOV VF devices by reusing code to power down PCI devices
instead of removing them when the guest requests to disable VFs. This
allows to realize devices and report VF realization errors at PF
realization time.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-6-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
pci_new() aborts when creating a VF with a function number equals to or
is greater than PCI_DEVFN_MAX.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-5-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The renamed state will not only represent powering state of PFs, but
also represent SR-IOV VF enablement in the future.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20240627-reuse-v10-1-7ca0b8ed3d9f@daynix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The unrealize functions of the various vhost-user devices are
calling the corresponding vhost_*_set_status() functions with a
status of 0 to shut down the device correctly.
Now these vhost_*_set_status() functions all follow this scheme:
bool should_start = virtio_device_should_start(vdev, status);
if (vhost_dev_is_started(&vvc->vhost_dev) == should_start) {
return;
}
if (should_start) {
/* ... do the initialization stuff ... */
} else {
/* ... do the cleanup stuff ... */
}
The problem here is virtio_device_should_start(vdev, 0) currently
always returns "true" since it internally only looks at vdev->started
instead of looking at the "status" parameter. Thus once the device
got started once, virtio_device_should_start() always returns true
and thus the vhost_*_set_status() functions return early, without
ever doing any clean-up when being called with status == 0. This
causes e.g. problems when trying to hot-plug and hot-unplug a vhost
user devices multiple times since the de-initialization step is
completely skipped during the unplug operation.
This bug has been introduced in commit 9f6bcfd99f ("hw/virtio: move
vm_running check to virtio_device_started") which replaced
should_start = status & VIRTIO_CONFIG_S_DRIVER_OK;
with
should_start = virtio_device_started(vdev, status);
which later got replaced by virtio_device_should_start(). This blocked
the possibility to set should_start to false in case the status flag
VIRTIO_CONFIG_S_DRIVER_OK was not set.
Fix it by adjusting the virtio_device_should_start() function to
only consider the status flag instead of vdev->started. Since this
function is only used in the various vhost_*_set_status() functions
for exactly the same purpose, it should be fine to fix it in this
central place there without any risk to change the behavior of other
code.
Fixes: 9f6bcfd99f ("hw/virtio: move vm_running check to virtio_device_started")
Buglink: https://issues.redhat.com/browse/RHEL-40708
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240618121958.88673-1-thuth@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
-----BEGIN PGP SIGNATURE-----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=LxwO
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu into staging
aspeed queue:
* Coverity fixes
* Deprecation of tacoma-bmc machine
* Buffer overflow fix in GPIO model
* Minor cleanup
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaDs3QACgkQUaNDx8/7
# 7KEc/BAAj5AS3rLm3NPpU13y1P1hcjuSm1/PVGTJQH+m4K9UaAkJ8VhRB0Y/rdU6
# ygGhKaCHyk96+I49Csz886YU9Wg9qnxaYJAbornHZJVGNy5tuVpQKM20kfgN3XFN
# ENJR3e+J6Ye7kCtR1ujcf0mydWDaDyq0i82ykURsudcQLMnGq1gBQGadYjt1hJoN
# F9HDPgUJ8/wjQnG8BomsrnuvUSpRTbGNV66FNxXdQ6C6d6OTKQfNnXXqrKO+8QPK
# B5XB9FjTk017DUog1jdE1SaEMowml8CmUhjMwLHOcyWhcZpEk90aMX8cQhefUs9y
# O6kNin2UYEjcTHA/lyfMQJQMNDDZTE32MyP1LwRE/5ZiHqrT7ViqNvZSPBGBueUz
# 9B0xiQTuYqcRqlwgyU73DvnTgrsKFdKQSldj5dXYVnWCKeKY/sCWApHMJxN9xMCA
# Uw1E4QfCLkd+TM6DoJAkBHWFsgi44Aym11VU4VviGNRNTgmTptgQzmHiYGNFiGZG
# OypVPM8Ti6UeVnW65l9J9f7xA0jDB+XQjhCCaoax9GlUMA4C4/Aln5OXXxIWRWFd
# XA3Gn3c/S2j7rMqdfAk68xDHuAJ3wShHlw6HLRd1Xki05WFTeLj1lejLHMdfpNmr
# DkQimzHShBqZzZGxc7FsO0keGY8kyIJkZhbCCbZrFXJXQGRdBao=
# =LxwO
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 02 Jul 2024 12:59:48 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240702' of https://github.com/legoater/qemu:
hw/net:ftgmac100: fix coding style
aspeed/sdmc: Remove extra R_MAIN_STATUS case
aspeed/soc: Fix possible divide by zero
aspeed/sdmc: Check RAM size value at realize time
aspeed: Deprecate the tacoma-bmc machine
hw/gpio/aspeed: Add reg_table_count to AspeedGPIOClass
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaDiSQACgkQ4+MsLN6t
wN4jmBAA2kxwFAGbKvokANDAZBwWmJdnuIPcqS+jdo/wCuQXOo1ROADd3NFlgQWx
z1xOv/LiAmQiUeeiP+nlA8gWCdW93PErU07og1p1+N2D1sBO6oG5QDlT/tTFuEGd
IL21jG2xWkEemd3PSN2pHKrytpS0e4S0cNZIKgTUTKdv+Mb2ZEiQi7K4zUTjcmjz
nlsSjTXdyKBmoiqNGhITWfbR2IUWjtCpzUO44ceqXd5HDpvfGhpKI7Uwun1W2xNU
yw1XrAFd64Qhd/lvc28G1DLfDdtRIoaRGxgLzQbU6621s0o50Ecs6TNHseuUAKvd
tQhOtM8IEuZ6jVw8nswCPIcJyjbeY29kjI4WmD2weF1fZbDey6Emlrf+dkJUIuCb
TximyTXw3rb1nREUVsEQLF69BKjTjE5+ETaplcTWGHCoH2+uA/5MqygalTH1Ub9W
TwVWSUwpNvIJ3RTsT20YVowkill8piF+ECldTKzJuWjqDviiJDoMm5EFdkkcUB20
nMyhGoiXtiQ4NYU0/B6HbHOXZkqLbhWcx9G281xJ+RRwjUyVxXD3zHGR9AoOp9ls
EAo/2URJtGN95LJmzCtaD+oo0wRZ5+7lmnqHPPXkYUdwFm4bhe3dP4NggIrS0cXn
19wvBqQuPwywxIbFEu6327YtfPRcImWIlFthWnm9lUyDmbOqDKw=
=fLCx
-----END PGP SIGNATURE-----
Merge tag 'hw-misc-20240702' of https://github.com/philmd/qemu into staging
Misc HW patches queue
- Prevent NULL deref in sPAPR network model (Oleg)
- Automatic deprecation of versioned machine types (Daniel)
- Correct 'dump-guest-core' property name in hint (Akihiko)
- Prevent IRQ leak in MacIO IDE model (Mark)
- Remove dead #ifdef'ry related to unsupported macOS 12.0 (Akihiko)
- Remove "hw/hw.h" where unnecessary (Thomas)
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaDiSQACgkQ4+MsLN6t
# wN4jmBAA2kxwFAGbKvokANDAZBwWmJdnuIPcqS+jdo/wCuQXOo1ROADd3NFlgQWx
# z1xOv/LiAmQiUeeiP+nlA8gWCdW93PErU07og1p1+N2D1sBO6oG5QDlT/tTFuEGd
# IL21jG2xWkEemd3PSN2pHKrytpS0e4S0cNZIKgTUTKdv+Mb2ZEiQi7K4zUTjcmjz
# nlsSjTXdyKBmoiqNGhITWfbR2IUWjtCpzUO44ceqXd5HDpvfGhpKI7Uwun1W2xNU
# yw1XrAFd64Qhd/lvc28G1DLfDdtRIoaRGxgLzQbU6621s0o50Ecs6TNHseuUAKvd
# tQhOtM8IEuZ6jVw8nswCPIcJyjbeY29kjI4WmD2weF1fZbDey6Emlrf+dkJUIuCb
# TximyTXw3rb1nREUVsEQLF69BKjTjE5+ETaplcTWGHCoH2+uA/5MqygalTH1Ub9W
# TwVWSUwpNvIJ3RTsT20YVowkill8piF+ECldTKzJuWjqDviiJDoMm5EFdkkcUB20
# nMyhGoiXtiQ4NYU0/B6HbHOXZkqLbhWcx9G281xJ+RRwjUyVxXD3zHGR9AoOp9ls
# EAo/2URJtGN95LJmzCtaD+oo0wRZ5+7lmnqHPPXkYUdwFm4bhe3dP4NggIrS0cXn
# 19wvBqQuPwywxIbFEu6327YtfPRcImWIlFthWnm9lUyDmbOqDKw=
# =fLCx
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 01 Jul 2024 09:59:16 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'hw-misc-20240702' of https://github.com/philmd/qemu: (22 commits)
Remove inclusion of hw/hw.h from files that don't need it
net/vmnet: Drop ifdef for macOS versions older than 12.0
block/file-posix: Drop ifdef for macOS versions older than 12.0
audio: Drop ifdef for macOS versions older than 12.0
hvf: Drop ifdef for macOS versions older than 12.0
hw/ide/macio: switch from using qemu_allocate_irq() to qdev input GPIOs
system/physmem: Fix reference to dump-guest-core
docs: document special exception for machine type deprecation & removal
hw/i386: remove obsolete manual deprecation reason string of i440fx machines
hw/ppc: remove obsolete manual deprecation reason string of spapr machines
hw: skip registration of outdated versioned machine types
hw: set deprecation info for all versioned machine types
include/hw: temporarily disable deletion of versioned machine types
include/hw: add macros for deprecation & removal of versioned machines
hw/i386: convert 'q35' machine definitions to use new macros
hw/i386: convert 'i440fx' machine definitions to use new macros
hw/m68k: convert 'virt' machine definitions to use new macros
hw/ppc: convert 'spapr' machine definitions to use new macros
hw/s390x: convert 'ccw' machine definitions to use new macros
hw/arm: convert 'virt' machine definitions to use new macros
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Store the command type altogether with the command handler and name.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-41-philmd@linaro.org>
Migration of a s390x guest with TCG was long known to be very unstable,
so the tests in tests/qtest/migration-test.c are disabled if running
with TCG instead of KVM.
Nicholas Piggin did a great analysis of the problem:
"The flic pending state is not migrated, so if the machine is migrated
while an interrupt is pending, it can be lost. This shows up in
qtest migration test, an extint is pending (due to console writes?)
and the CPU waits via s390_cpu_set_psw and expects the interrupt to
wake it. However when the flic pending state is lost, s390_cpu_has_int
returns false, so s390_cpu_exec_interrupt falls through to halting
again."
Thus let's finally migrate the pending state, and to be on the safe
side, also the other state variables of the QEMUS390FLICState structure.
Message-ID: <20240619144421.261342-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
ASan detected a global-buffer-overflow error in the aspeed_gpio_read()
function. This issue occurred when reading beyond the bounds of the
reg_table.
To enhance the safety and maintainability of the Aspeed GPIO code, this commit
introduces a reg_table_count member to the AspeedGPIOClass structure. This
change ensures that the size of the GPIO register table is explicitly tracked
and initialized, reducing the risk of errors if new register tables are
introduced in the future.
Reproducer:
cat << EOF | qemu-system-aarch64 -display none \
-machine accel=qtest, -m 512M -machine ast1030-evb -qtest stdio
readq 0x7e780272
EOF
ASAN log indicating the issue:
==2602930==ERROR: AddressSanitizer: global-buffer-overflow on address 0x55a5da29e128 at pc 0x55a5d700dc62 bp 0x7fff096c4e90 sp 0x7fff096c4e88
READ of size 2 at 0x55a5da29e128 thread T0
#0 0x55a5d700dc61 in aspeed_gpio_read hw/gpio/aspeed_gpio.c:564:14
#1 0x55a5d933f3ab in memory_region_read_accessor system/memory.c:445:11
#2 0x55a5d92fba40 in access_with_adjusted_size system/memory.c:573:18
#3 0x55a5d92f842c in memory_region_dispatch_read1 system/memory.c:1426:16
#4 0x55a5d92f7b68 in memory_region_dispatch_read system/memory.c:1459:9
#5 0x55a5d9376ad1 in flatview_read_continue_step system/physmem.c:2836:18
#6 0x55a5d9376399 in flatview_read_continue system/physmem.c:2877:19
#7 0x55a5d93775b8 in flatview_read system/physmem.c:2907:12
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2355
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
hw/hw.h only contains the prototype of hw_error() nowadays, so
files that don't use this function don't need to include this
header.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20240701132649.58345-1-thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This prevents the IRQs from being leaked when the macio IDE device is used.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240628160334.653168-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This calls the MACHINE_VER_DELETION() macro in the machine type
registration method, so that when a versioned machine type reaches
the end of its life, it is no longer registered with QOM and thus
cannot be used.
The actual definition of the machine type should be deleted at
this point, but experience shows that can easily be forgotten.
By skipping registration the manual code deletion task can be
done at any later date.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-12-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This calls the MACHINE_VER_DEPRECATION() macro in the definition of
all machine type classes which support versioning. This ensures
that they will automatically get deprecation info set when they
reach the appropriate point in their lifecycle.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-11-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The new deprecation and deletion policy for versioned machine types is
being introduced in QEMU 9.1.0.
Under the new policy a number of old machine types (any prior to 2.12)
would be liable for immediate deletion which would be a violation of our
historical deprecation and removal policy
Thus automatic deletions (by skipping QOM registration) are temporarily
gated on existance of the env variable "QEMU_DELETE_MACHINES" / QEMU
version number >= 10.1.0. This allows opt-in testing of the automatic
deletion logic, while activating it fully in QEMU >= 10.1.0.
This whole commit should be reverted in the 10.1.0 dev cycle or shortly
thereafter.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240620165742.1711389-10-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Versioned machines live for a long time to provide back compat for
incoming migration and restore of saved images. To guide users away from
usage of old machines, however, we want to deprecate any older than 3
years (equiv of 9 releases), and delete any older than 6 years (equiva
of 18 releases).
To get a standardized deprecation message and avoid having to remember
to manually add it after three years, this introduces two macros to be
used by targets when defining versioned machines.
* MACHINE_VER_DEPRECATION(major, minor)
Automates the task of setting the 'deprecation_reason' field on the
machine, if-and-only-if the major/minor version is older than 3 years.
* MACHINE_VER_DELETION(major, minor)
Simulates the deletion of by skipping registration of the QOM type
for a versioned machine, if-and-only-if the major/minor version is
older than 6 years.
By using these two macros there is no longer any manual work required
per-release to deprecate old machines. By preventing the use of machines
that have reached their deletion date, it is also not necessary to
manually delete machines per-release. Deletion can be batched up once a
year or whenever makes most sense.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-9-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
This changes the DEFINE_I440FX_MACHINE macro to use the common
helpers for constructing versioned symbol names and strings,
bringing greater consistency across targets.
The added benefit is that it avoids the need to repeat the
version number thrice in three different formats in the calls
to DEFINE_I440FX_MACHINE.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240620165742.1711389-7-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The various targets which define versioned machine types have
a bunch of obfuscated macro code for defining unique function
and variable names using string concatenation.
This adds a couple of helpers to improve the clarity of such
code macro.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240620165742.1711389-2-berrange@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In current code, when guest does S3, virtio-gpu are reset due to the
bit No_Soft_Reset is not set. After resetting, the display resources
of virtio-gpu are destroyed, then the display can't come back and only
show blank after resuming.
Implement No_Soft_Reset bit of PCI_PM_CTRL register, then guest can check
this bit, if this bit is set, the devices resetting will not be done, and
then the display can work after resuming.
No_Soft_Reset bit is implemented for all virtio devices, and was tested
only on virtio-gpu device. Set it false by default for safety.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Message-Id: <20240606102205.114671-3-Jiqian.Chen@amd.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Shutdown requests are normally hardware dependent.
By extending pvpanic to also handle shutdown requests, guests can
submit such requests with an easily implementable and cross-platform
mechanism.
Acked-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-5-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The different components of pvpanic duplicate the list of supported
events. Move it to the shared header file to minimize changes when new
events are added.
MST: tweak: keep header included in pvpanic.c to avoid header
dependency, rebase.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Thomas Weißschuh <thomas@t-8ch.de>
Message-Id: <20240527-pvpanic-shutdown-v8-3-5a28ec02558b@t-8ch.de>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
All DPA ranges in the DC regions are invalid to access until an extent
covering the range has been successfully accepted by the host. A bitmap
is added to each region to record whether a DC block in the region has
been backed by a DC extent. Each bit in the bitmap represents a DC block.
When a DC extent is accepted, all the bits representing the blocks in the
extent are set, which will be cleared when the extent is released.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-13-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To simulate FM functionalities for initiating Dynamic Capacity Add
(Opcode 5604h) and Dynamic Capacity Release (Opcode 5605h) as in CXL spec
r3.1 7.6.7.6.5 and 7.6.7.6.6, we implemented two QMP interfaces to issue
add/release dynamic capacity extents requests.
With the change, we allow to release an extent only when its DPA range
is contained by a single accepted extent in the device. That is to say,
extent superset release is not supported yet.
1. Add dynamic capacity extents:
For example, the command to add two continuous extents (each 128MiB long)
to region 0 (starting at DPA offset 0) looks like below:
{ "execute": "qmp_capabilities" }
{ "execute": "cxl-add-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"selection-policy": "prescriptive",
"region": 0,
"extents": [
{
"offset": 0,
"len": 134217728
},
{
"offset": 134217728,
"len": 134217728
}
]
}
}
2. Release dynamic capacity extents:
For example, the command to release an extent of size 128MiB from region 0
(DPA offset 128MiB) looks like below:
{ "execute": "cxl-release-dynamic-capacity",
"arguments": {
"path": "/machine/peripheral/cxl-dcd0",
"host-id": 0,
"removal-policy":"prescriptive",
"region": 0,
"extents": [
{
"offset": 134217728,
"len": 134217728
}
]
}
}
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-12-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per CXL spec 3.1, two mailbox commands are implemented:
Add Dynamic Capacity Response (Opcode 4802h) 8.2.9.9.9.3, and
Release Dynamic Capacity (Opcode 4803h) 8.2.9.9.9.4.
For the process of the above two commands, we use two-pass approach.
Pass 1: Check whether the input payload is valid or not; if not, skip
Pass 2 and return mailbox process error.
Pass 2: Do the real work--add or release extents, respectively.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-11-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add dynamic capacity extent list representative to the definition of
CXLType3Dev and implement get DC extent list mailbox command per
CXL.spec.3.1:.8.2.9.9.9.2.
Tested-by: Svetly Todorov <svetly.todorov@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-10-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add (file/memory backed) host backend for DCD. All the dynamic capacity
regions will share a single, large enough host backend. Set up address
space for DC regions to support read/write operations to dynamic capacity
for DCD.
With the change, the following support is added:
1. Add a new property to type3 device "volatile-dc-memdev" to point to host
memory backend for dynamic capacity. Currently, all DC regions share one
host backend;
2. Add namespace for dynamic capacity for read/write support;
3. Create cdat entries for each dynamic capacity region.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-9-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename mem_size as static_mem_size for type3 memdev to cover static RAM and
pmem capacity, preparing for the introduction of dynamic capacity to support
dynamic capacity devices.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-6-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Per cxl spec r3.1, add dynamic capacity (DC) region representative based on
Table 8-165 and extend the cxl type3 device definition to include DC region
information. Also, based on info in 8.2.9.9.9.1, add 'Get Dynamic Capacity
Configuration' mailbox support.
Note: we store region decode length as byte-wise length on the device, which
should be divided by 256 * MiB before being returned to the host
for "Get Dynamic Capacity Configuration" mailbox command per
specification.
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-5-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This enables wrapper devices to customize the base device's CCI
(for example, with custom commands outside the specification)
without the need to change the base device.
The also enabled the base device to dispatch those commands without
requiring additional driver support.
Heavily edited by Jonathan Cameron to increase code reuse
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-3-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This allows devices to have fully customized CCIs, along with complex
devices where wrapper devices can override or add additional CCI
commands without having to replicate full command structures or
pollute a base device with every command that might ever be used.
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Fan Ni <fan.ni@samsung.com>
Message-Id: <20240523174651.1089554-2-nifan.cxl@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit f02a4b8e64.
Since the current patch cannot completely fix the lost reconnect
problem, there is a scenario that is not considered:
- When the virtio-blk driver is removed from the guest os,
s->connected has no chance to be set to false, resulting in
subsequent reconnection not being executed.
The next patch will completely fix this issue with a better approach.
Signed-off-by: Li Feng <fengli@smartx.com>
Message-Id: <20240516025753.130171-2-fengli@smartx.com>
Reviewed-by: Raphael Norwitz <raphael@enfabrica.net>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add support to virtio-pci devices for handling the extra data sent
from the driver to the device when the VIRTIO_F_NOTIFICATION_DATA
transport feature has been negotiated.
The extra data that's passed to the virtio-pci device when this
feature is enabled varies depending on the device's virtqueue
layout.
In a split virtqueue layout, this data includes:
- upper 16 bits: shadow_avail_idx
- lower 16 bits: virtqueue index
In a packed virtqueue layout, this data includes:
- upper 16 bits: 1-bit wrap counter & 15-bit shadow_avail_idx
- lower 16 bits: virtqueue index
Signed-off-by: Jonah Palmer <jonah.palmer@oracle.com>
Message-Id: <20240315165557.26942-2-jonah.palmer@oracle.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On setups with one or more virtio-net devices with vhost on,
dirty tracking iteration increases cost the bigger the number
amount of queues are set up e.g. on idle guests migration the
following is observed with virtio-net with vhost=on:
48 queues -> 78.11% [.] vhost_dev_sync_region.isra.13
8 queues -> 40.50% [.] vhost_dev_sync_region.isra.13
1 queue -> 6.89% [.] vhost_dev_sync_region.isra.13
2 devices, 1 queue -> 18.60% [.] vhost_dev_sync_region.isra.14
With high memory rates the symptom is lack of convergence as soon
as it has a vhost device with a sufficiently high number of queues,
the sufficient number of vhost devices.
On every migration iteration (every 100msecs) it will redundantly
query the *shared log* the number of queues configured with vhost
that exist in the guest. For the virtqueue data, this is necessary,
but not for the memory sections which are the same. So essentially
we end up scanning the dirty log too often.
To fix that, select a vhost device responsible for scanning the
log with regards to memory sections dirty tracking. It is selected
when we enable the logger (during migration) and cleared when we
disable the logger. If the vhost logger device goes away for some
reason, the logger will be re-selected from the rest of vhost
devices.
After making mem-section logger a singleton instance, constant cost
of 7%-9% (like the 1 queue report) will be seen, no matter how many
queues or how many vhost devices are configured:
48 queues -> 8.71% [.] vhost_dev_sync_region.isra.13
2 devices, 8 queues -> 7.97% [.] vhost_dev_sync_region.isra.14
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Message-Id: <1710448055-11709-2-git-send-email-si-wei.liu@oracle.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
The implementation of configurable interrupts (interrupts supporting
edge selection) was incorrectly expecting alternating input levels :
this commits adds a new status field `irq_levels` to actually detect
edges.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240629110800.539969-2-ines.varhol@telecom-paris.fr
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce global xen_is_stubdomain variable when qemu is running inside
a stubdomain instead of dom0. This will be relevant for subsequent
patches, as few things like accessing PCI config space need to be done
differently.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Message-Id: <e66aa97dca5120f22e015c19710b2ff04f525720.1711506237.git-series.marmarek@invisiblethingslab.com>
Signed-off-by: Anthony PERARD <anthony@xenproject.org>
The caller of smmu_iommu_mr wants to get sdev for smmuv3_flush_config().
Do it directly instead of bridging with an iommu mr pointer.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Message-id: 20240619002218.926674-1-nicolinc@nvidia.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Four mailbox properties are implemented as follows:
1. Customer OTP: GET_CUSTOMER_OTP and SET_CUSTOMER_OTP
2. Device-specific private key: GET_PRIVATE_KEY and
SET_PRIVATE_KEY.
The customer OTP is located in the rows 36-43. The device-specific private key
is located in the rows 56-63.
The customer OTP can be locked with the magic numbers 0xffffffff 0xaffe0000
when running the SET_CUSTOMER_OTP mailbox command. Bit 6 of row 32 indicates
this lock, which is undocumented. The lock also applies to the device-specific
private key.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Replace stubbed OTP memory region with the new OTP device.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The OTP device registers are currently stubbed. For now, the device
houses the OTP rows which will be accessed directly by other peripherals.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hmp_info_roms() was removed in commit dd98234c05 ("qapi:
introduce x-query-roms QMP command"),
hmp_info_numa() in commit 1b8ae799d8 ("qapi: introduce
x-query-numa QMP command"),
hmp_info_ramblock() in commit ca411b7c8a ("qapi: introduce
x-query-ramblock QMP command")
and hmp_info_irq() in commit 91f2fa7045 ("qapi: introduce
x-query-irq QMP command").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
