This reverts 829e1376d9 ("tcg/s390: Introduce TCG_REG_TB"), and
several follow-up patches. The primary motivation is to reduce the
less-tested code paths, pre-z10. Secondarily, this allows the
unconditional use of TCG_TARGET_HAS_direct_jump, which might be more
important for performance than any slight increase in code size.
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
v4: Do not simplify tgen_ori, tgen_xori.
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmO3b5sACgkQIeENKd+X
cFTD8Af+L0OaGzE4C0jil7LdITFKk7ltdTg3yw84ZBvIxrEWMWlt5Yj3Ez5OIPbY
WpPmCLoJ9XM/5CV5PuPjxcFFExWjXLNeMEvaaT/3/3jPPnA/M/AbZa4hefKRluTg
kkvBiOuRMPXiYLki5xAHmjD/1j6SQ8ghylPLxYQqyGq87WZt4Dx9msOTZLVzmmYl
8y9oC8j6yO2UBZYC1TxSkKxFbj+Cp2HmtBZ09tDzwRL6DpRvIlfftiLl8X3awMlK
YTzCIrmllc38/+cV9IpQhdXzDUZ1kM7Zy56JbJl3XOsS4VnUYGmEtrKYpYQ2CKLY
/tcmrDKNw1ArWcP1axNN8FHfhy1FyQ==
=SH+C
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu into staging
First RISC-V PR for QEMU 8.0
* Fix PMP propagation for tlb
* Collection of bug fixes
* Bump the OpenTitan supported version
* Add smstateen support
* Support native debug icount trigger
* Remove the redundant ipi-id property in the virt machine
* Support cache-related PMU events in virtual mode
* Add some missing PolarFire SoC io regions
* Fix mret exception cause when no pmp rule is configured
* Fix bug where disabling compressed instructions would crash QEMU
* Add Zawrs ISA extension support
* A range of code refactoring and cleanups
# gpg: Signature made Fri 06 Jan 2023 00:47:23 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20230106' of https://github.com/alistair23/qemu: (43 commits)
hw/intc: sifive_plic: Fix the pending register range check
hw/riscv: opentitan: Drop "hartid-base" and "priority-base" initialization
hw/intc: sifive_plic: Change "priority-base" to start from interrupt source 0
hw/riscv: virt: Fix the value of "riscv, ndev" in the dtb
hw/riscv: sifive_u: Avoid using magic number for "riscv, ndev"
hw/riscv: sifive_e: Fix the number of interrupt sources of PLIC
hw/riscv: microchip_pfsoc: Fix the number of interrupt sources of PLIC
hw/intc: sifive_plic: Update "num-sources" property default value
hw/intc: sifive_plic: Use error_setg() to propagate the error up via errp in sifive_plic_realize()
hw/intc: sifive_plic: Improve robustness of the PLIC config parser
hw/intc: sifive_plic: Drop PLICMode_H
hw/riscv: spike: Remove misleading comments
hw/riscv: Sort machines Kconfig options in alphabetical order
hw/riscv: Fix opentitan dependency to SIFIVE_PLIC
hw/intc: Select MSI_NONBROKEN in RISC-V AIA interrupt controllers
hw/riscv: Select MSI_NONBROKEN in SIFIVE_PLIC
RISC-V: Add Zawrs ISA extension support
target/riscv: Clear mstatus.MPRV when leaving M-mode for priv spec 1.12+
target/riscv: Simplify helper_sret() a little bit
target/riscv: Set pc_succ_insn for !rvc illegal insn
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When guest_base != 0, we were not coordinating the usage of
TCG_REG_TMP0 as base properly, leading to a previous zero-extend
of the input address being discarded.
Shuffle the alignment check to the front, because that does not
depend on the zero-extend, and it keeps the register usage clear.
Set base after each step of the address arithmetic instead of before.
Return the base register used from tcg_out_tlb_load, so as to
keep that register choice localized to that function.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221023233337.2846860-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There was a typo using opc_addi instead of opc_add with the
two registers. While we're at it, simplify the gating test
to al == bl to improve dynamic scheduling even when the
output register does not overlap the inputs.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221020233836.2341671-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We were matching a signed 13-bit range, not a 12-bit range.
Expand the commentary within the function and be explicit
about all of the ranges.
Reported-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20221022095821.2441874-1-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This eliminates an ifdef for TCI, and will be required for
expanding the call for TCGv_i128.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is only one use, and BLR is perhaps even more
self-documentary than CALLR.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of requiring a separate hash table lookup,
put a pointer to the CIF into TCGHelperInfo.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-4-philmd@linaro.org>
In the unlikely case of invalid typecode mask, the function
will abort instead of returning a NULL pointer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221111074101.2069454-27-richard.henderson@linaro.org>
[PMD: Split from bigger patch]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221122180804.938-2-philmd@linaro.org>
Pre-compute the function call layout for each helper at startup.
Drop TCG_CALL_DUMMY_ARG, as we no longer need to leave gaps
in the op->args[] array. This allows several places to stop
checking for NULL TCGTemp, to which TCG_CALL_DUMMY_ARG mapped.
For tcg_gen_callN, loop over the arguments once. Allocate the TCGOp
for the call early but delay emitting it, collecting arguments first.
This allows the argument processing loop to emit code for extensions
and have them sequenced before the call.
For tcg_reg_alloc_call, loop over the arguments in reverse order,
which allows stack slots to be filled first naturally.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will shortly have the possibility of more that two outputs,
though only for calls (for which preferences are moot). Avoid
direct references to op->output_pref[] when possible.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We have been allocating a worst case number of arguments
to support calls. Instead, allow the size to vary.
By default leave space for 4 args, to maximize reuse,
but allow calls to increase the number of args to 32.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split patch in two]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-3-philmd@linaro.org>
In order to have variable size allocated TCGOp, pass the number
of arguments we use (and would allocate) up to tcg_op_alloc().
This alters tcg_emit_op(), tcg_op_insert_before() and
tcg_op_insert_after() prototypes.
In tcg_op_alloc() ensure the number of arguments is in range.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Extracted from bigger patch]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221218211832.73312-2-philmd@linaro.org>
Change 32-bit tci TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EVEN, to
force 32-bit values to be aligned to 64-bit. With a small reorg
to the argument processing loop, this neatly replaces an ifdef for
CONFIG_TCG_INTERPRETER.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 64-bit hosts that had TCG_TARGET_EXTEND_ARGS, set
TCG_TARGET_CALL_ARG_I32 to TCG_CALL_ARG_EXTEND.
Otherwise, use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For 32-bit hosts when TCG_TARGET_CALL_ALIGN_ARGS was set, use
TCG_CALL_ARG_EVEN. For 64-bit hosts, TCG_TARGET_CALL_ALIGN_ARGS
was silently ignored, so always use TCG_CALL_ARG_NORMAL.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Prepare to replace a bunch of separate ifdefs with a
consistent way to describe the ABI of a function call.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a helper function for computing the size of a type.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allocate the first of a pair at the lower address, and the
second of a pair at the higher address. This will make it
easier to find the beginning of the larger memory block.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The first thing that temp_sync does is check mem_coherent,
so there's no need for the caller to do so.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Record the location of a TCGTemp within a larger object.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the error-generating fallback from tcg-op.c, and
replace "_link_error" with modern QEMU_ERROR markup.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are several instances where we need to be able to
allocate a pair of registers to related inputs/outputs.
Add 'p' and 'm' register constraints for this, in order to
be able to allocate the even/odd register first or second.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In preparation of introducing paired registers,
massage a bit process_op_defs()'s switch case.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[PMD: Split from bigger patch, 1/3]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221219220925.79218-2-philmd@linaro.org>
We now check the consistency of reg_to_temp[] with each update,
so the utility of checking consistency at the end of each
opcode is minimal. In addition, the form of this check is
quite expensive, consuming 10% of a checking-enabled build.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Create two new functions, set_temp_val_{reg,nonreg}.
Assert that the reg_to_temp mapping is correct before
any changes are made.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The assignment to mem_coherent should be done with any
modification, not simply with a newly allocated register.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Unused since commit 7b7d8b2d9a ("tcg/tci: Use ffi for calls").
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hppa host code has been removed since 2013; this
should have been deleted at the same time.
Fixes: 802b508123 ("tcg-hppa: Remove tcg backend")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Replace goto allocate_in_reg with a boolean.
Remove o_preferred_regs which isn't used, except to copy.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Remove whitespace at end of line, plus one place this also
highlights some missing braces.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We are going to modify this code, so fix its style first to avoid:
ERROR: spaces required around that '*' (ctx:VxV)
#281: FILE: tcg/s390x/tcg-target.c.inc:1224:
+ uintptr_t mask = ~(0xffffull << i*16);
^
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221130132654.76369-2-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert tcg/README to rst and move it to docs/devel as a new "TCG Intermediate
Representation" page. There are a few minor changes to improve the aesthetic
of the final output which are as follows:
- Rename the title from "Tiny Code Generator - Fabrice Bellard" to "TCG
Intermediate Representation"
- Remove the section numbering
- Add the missing parameters to the ssadd_vec operations in the "Host
vector operations" section
- Change the path to the Atomic Operations document to use a proper
reference
- Replace tcg/README in tcg.rst with a proper reference to the new document
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Message-Id: <20221130100434.64207-2-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
=6hXE
-----END PGP SIGNATURE-----
Merge tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu into staging
testing and plugin updates for 7.2:
- cleanup win32/64 docker files
- update test-mingw test
- add flex/bison to debian-all-test
- handle --enable-static/--disable-pie in config
- extend timeouts on x86_64 avocado tests
- add flex/bison to debian-hexagon-cross
- use regular semihosting for nios2 check-tcg
- fix obscure linker error to nios2 softmmu tests
- various windows portability fixes for tests
- clean-up of MAINTAINERS
- use -machine none when appropriate in avocado
- make raspi2_initrd test detect shutdown
- disable sh4 rd2 tests on gitlab
- re-enable threadcount/linux-test for sh4
- clean-up s390x handling of "ex" instruction
- better handle new CPUs in execlog plugin
- pass CONFIG_DEBUG_TCG to plugin builds
- try and avoid races in test-io-channel-command
- speed up ssh key checking for tests/vm
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmNhI/MACgkQ+9DbCVqe
# KkSFXggAg0HIpBDcNz0V5Mh5p69F14pwbDSygKqGDFBebdOHeL7f+WCvQPUGEWxp
# 814zjvRY3SC4Mo4mtzguRvNu0styaUpemvRw5FDYK48GpEjg2eVxTnAFD4nr7ud0
# dhw3iaHP+RjA6s3EpPUqQ5nlZEgFJ+Tvkckk3wKSpksBYA4tJra6Uey5kpZ27x0T
# KOzB2P6w+9B/B11n/aeSxvRPZdnXt2MyfS/3pwwfoFYioEyaEQ3Ie6ooachtdSL3
# PEvnJVK0VVYbZQwBXJlycNLlK/D++s4AEwmnZ5GmvDFuXlkRO9YMy9Wa5TKJl7gz
# 76Aw1KHsE03SyAPvH4bE7eGkIwhJOQ==
# =6hXE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Nov 2022 09:49:39 EDT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-for-7.2-011122-3' of https://github.com/stsquad/qemu: (31 commits)
tests/vm: use -o IdentitiesOnly=yes for ssh
tests/unit: cleanups for test-io-channel-command
contrib/plugins: protect execlog's last_exec expansion
contrib/plugins: enable debug on CONFIG_DEBUG_TCG
tests/tcg: include CONFIG_PLUGIN in config-host.mak
target/s390x: fake instruction loading when handling 'ex'
target/s390x: don't probe next pc for EXecuted insns
target/s390x: don't use ld_code2 to probe next pc
tests/tcg: re-enable threadcount for sh4
tests/tcg: re-enable linux-test for sh4
tests/avocado: disable sh4 rd2 tests on Gitlab
tests/avocado: raspi2_initrd: Wait for guest shutdown message before stopping
tests/avocado: set -machine none for userfwd and vnc tests
MAINTAINERS: fix-up for check-tcg Makefile changes
MAINTAINERS: add features_to_c.sh to gdbstub files
MAINTAINERS: add entries for the key build bits
hw/usb: dev-mtp: Use g_mkdir()
block/vvfat: Unify the mkdir() call
tcg: Avoid using hardcoded /tmp
semihosting/arm-compat-semi: Avoid using hardcoded /tmp
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use g_get_tmp_dir() to get the directory to use for temporary files.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221006151927.2079583-3-bmeng.cn@gmail.com>
Message-Id: <20221027183637.2772968-12-alex.bennee@linaro.org>
When registering helpers via FFI for TCI, the inner loop that iterates
parameters of the helper reuses (and thus pollutes) the same variable
used by the outer loop that iterates all helpers, thus made some helpers
unregistered.
Fix this logic error by using a dedicated temporary variable for the
inner loop.
Fixes: 22f15579fa ("tcg: Build ffi data structures for helpers")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Message-Id: <20221028072145.1593205-1-uwu@icenowy.me>
[rth: Move declaration of j to the for loop itself]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With sparc64 we need not distinguish between registers that
can hold 32-bit values and those that can hold 64-bit values.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Emphasize that we only support full 64-bit code generation.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Since 9b9c37c364, we have only supported sparc64 cpus.
Debian and Gentoo now only support 64-bit sparc64 userland,
so it is time to drop the 32-bit sparc64 userland: sparc32plus.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AArch64 defines the TCG_TARGET_HAS_direct_jump. So the "else" block is
useless in the case of "INDEX_op_goto_tb" in function "tcg_out_op". Add
an assertion and delete these codes for clarity.
Suggested-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Qi Hu <huqi@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221017020826.990729-1-huqi@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Similar to the ARM64, LoongArch has PC-relative instructions such as
PCADDU18I. These instructions can be used to support direct jump for
LoongArch. Additionally, if instruction "B offset" can cover the target
address(target is within ±128MB range), a single "B offset" plus a nop
will be used by "tb_target_set_jump_target".
Signed-off-by: Qi Hu <huqi@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: WANG Xuerui <git@xen0n.name>
Message-Id: <20221015092754.91971-1-huqi@loongson.cn>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
PowerPC64 processors handle direct branches better than indirect
ones, resulting in less stalled cycles and branch misses.
However, PPC's tb_target_set_jmp_target() was only using direct
branches for 16-bit jumps, while PowerPC64's unconditional branch
instructions are able to handle displacements of up to 26 bits.
To take advantage of this, now jumps whose displacements fit in
between 17 and 26 bits are also converted to direct branches.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Leandro Lupori <leandro.lupori@eldorado.org.br>
[rth: Expanded some commentary.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This fixes a bug in POSIX-compliant environments. Since we had allocated
a buffer named 'tcg-jit' with read-write access protections we need a int
type to combine these access flags and return it, whereas we had inexplicably
return a bool type. It may cause an unnecessary protection change in
tcg_region_init().
Cc: qemu-stable@nongnu.org
Fixes: 7be9ebcf92 ("tcg: Return the map protection from alloc_code_gen_buffer")
Signed-off-by: Shaobo Song <shnusongshaobo@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220624150216.3627-1-shnusongshaobo@gmail.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing in this environment variable that cannot
be done better with -d flags. There is nothing special
about TCI that warrants this hack.
Moreover, it does not compile -- remove it.
Reported-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Power ISA v3.0 introduced mod[su][wd] insns that can be used to
implement rem[u]_i{32,64}.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The masking in tcg_out_shl was incorrect, producing an
illegal instruction, rather than merely unspecified results
for the out-of-range shift.
Tested-by: Joel Stanley <joel@jms.id.au>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1051
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We wanted the VPSRAQ variant with the scalar vector shift operand,
not the variant with an immediate operand.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1022
Fixes: 47b331b2a8 ("tcg/i386: Implement avx512 scalar shift")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
lwsync orders more than just LD_LD, importantly it matches x86 and
s390 default memory ordering.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220519135908.21282-4-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
eieio does not provide ordering between stores to CI memory and stores
to cacheable memory so it can't be used as a general ST_ST barrier.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-of-by: Nicholas Piggin <npiggin@gmail.com>
Message-Id: <20220519135908.21282-3-npiggin@gmail.com>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Move vmsumuhm and vmsumuhs to decodetree, declare vmsumuhm helper with
TCG_CALL_NO_RWG, and drop the unused env argument.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220517123929.284511-12-matheus.ferst@eldorado.org.br>
[danielhb: added #undef VMSUMUHM to fix ppc64 build]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Swap half-words (16-bit) and words (32-bit) within a larger value.
Mirrors functions of the same names within include/qemu/bitops.h.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Miller <dmiller423@gmail.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20220428094708.84835-5-david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
With TCG_OPF_COND_BRANCH, we extended the lifetimes of
globals across extended basic blocks. This means that
the liveness computed in pass 1 does not kill globals
in the same way as normal temps.
Introduce TYPE_EBB to match this lifetime, so that we
get correct register allocation for the temps that we
introduce during the indirect lowering pass.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: b4cb76e620 ("tcg: Do not kill globals at conditional branches")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
All uses flush output immediately before or after qemu_log_unlock.
Instead of a separate call, move the flush into qemu_log_unlock.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-20-richard.henderson@linaro.org>
We have already looked up and locked the filepointer.
Use fprintf instead of qemu_log directly for output
in and around tcg_dump_ops.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-12-richard.henderson@linaro.org>
Inside qemu_log, we perform qemu_log_trylock/unlock, which need
not be done if we have already performed the lock beforehand.
Always check the result of qemu_log_trylock -- only checking
qemu_loglevel_mask races with the acquisition of the lock on
the logfile.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-10-richard.henderson@linaro.org>
This function can fail, which makes it more like ftrylockfile
or pthread_mutex_trylock than flockfile or pthread_mutex_lock,
so rename it.
To closer match the other trylock functions, release rcu_read_lock
along the failure path, so that qemu_log_unlock need not be called
on failure.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-8-richard.henderson@linaro.org>
Replace the global variables with inlined helper functions. getpagesize() is very
likely annotated with a "const" function attribute (at least with glibc), and thus
optimization should apply even better.
This avoids the need for a constructor initialization too.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-12-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace a config-time define with a compile time condition
define (compatible with clang and gcc) that must be declared prior to
its usage. This avoids having a global configure time define, but also
prevents from bad usage, if the config header wasn't included before.
This can help to make some code independent from qemu too.
gcc supports __BYTE_ORDER__ from about 4.6 and clang from 3.2.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ For the s390x parts I'm involved in ]
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-7-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Typo used only 'ul' suffix, which is still 32-bits for windows host.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/947
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The LDRD (register) instruction is UNPREDICTABLE if the Rm register
is the same as either Rt or Rt+1 (the two registers being loaded to).
We weren't making sure we avoided this, with the result that on some
host CPUs like the Cortex-A7 we would get a SIGILL because the CPU
chooses to UNDEF for this particular UNPREDICTABLE case.
Since we've already checked that datalo is aligned, we can simplify
the test vs the Rm operand by aligning it before comparison. Check
for the two orderings before falling back to two ldr instructions.
We don't bother to do anything similar for tcg_out_ldrd_rwb(),
because it is only used in tcg_out_tlb_read() with a fixed set of
registers which don't overlap.
There is no equivalent UNPREDICTABLE case for STRD.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/896
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We copied the data from the general register input to the
vector register output, but have not yet replicated it.
We intended to fall through into the vector-vector case,
but failed to redirect the input register.
This is caught by an assertion failure in tcg_out_insn_VRIc,
which diagnosed the incorrect register class.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The operands are output in the wrong order: the tcg selector
argument is first, whereas the s390x selector argument is last.
Tested-by: Thomas Huth <thuth@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/898
Fixes: 9bca986df8 ("tcg/s390x: Implement TCG_TARGET_HAS_bitsel_vec")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Move the various memalign-related functions out of osdep.h and into
their own header, which we include only where they are used.
While we're doing this, add some brief documentation comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20220226180723.1706285-10-peter.maydell@linaro.org
The general ternary logic operation can implement BITSEL.
Funnel the 4-operand operation into three variants of the
3-operand instruction, depending on input operand overlap.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has a general ternary logic operation, VPTERNLOGQ,
which can implement NOT, ORC, NAND, NOR, EQV.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512DQ has VPMULLQ.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPABSQ, VPMAXSQ, VPMAXUQ, VPMINSQ, VPMINUQ.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Expand 32-bit and 64-bit scalar rotate with VPRO[LR]V;
expand 16-bit scalar rotate with VPSHLDV.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no such instruction on x86, so we should
not be pretending it has arguments.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
While there are no specific 16-bit rotate instructions, there
are double-word shifts, which can perform the same operation.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We will use VPSHLD, VPSHLDV and VPSHRDV for 16-bit rotates.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPROLVD and VPRORVQ.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPROLD and VPROLQ, layered onto the same
opcode as PSHIFTD, but requires EVEX encoding and W1.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512 has VPSRAQ with immediate operand, in the same form as
with AVX, but requires EVEX encoding and W1.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPSRAQ.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
AVX512VL has VPSRAVQ, and
AVX512BW has VPSLLVW, VPSRAVW, VPSRLVW.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The condition for UMIN/UMAX availability is about to change;
use the canonical version.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The evex encoding is added here, for use in a subsequent patch.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There are some operation sizes in some subsets of AVX512 that
are missing from previous iterations of AVX. Detect them.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We've had placeholders for these opcodes for a while,
and should have support on ppc, s390x and avx512 hosts.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The last entry of DEF_HELPERS_FLAGS_n is DEF_HELPER_FLAGS_7 and
thus the MAX_OPC_PARAM_IARGS should be 7.
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-Id: <20220227113127.414533-2-ziqiaokong@gmail.com>
Fixes: e6cadf49c3 ("tcg: Add support for a helper with 7 arguments")
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
valgrind pointed out that arg_info()->val can be undefined which will
be the case if the arguments are not constant. The ordering of the
checks will have ensured we never relied on an undefined value but for
the sake of completeness re-order the code to be clear.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220209112142.3367525-1-alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Following the implementation of tcg_gen_gvec_3i, add a four-vector and
immediate operand expansion method.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20220225210936.1749575-34-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The tcg_out_ldst helper will handle out-of-range offsets.
We haven't actually encountered any, since we haven't run
across the assert within tcg_out_op_rrs, but an out-of-range
offset would not be impossible in future.
Fixes: 6508988918 ("tcg/tci: Change encoding to uint32_t units")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The qemu_icache_linesize, qemu_icache_linesize_log,
qemu_dcache_linesize, and qemu_dcache_linesize_log variables are not
used in many files. Move them out of osdep.h to a new
qemu/cacheinfo.h, and document them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-5-peter.maydell@linaro.org
The qemu_mprotect_*() family of functions are used in very few files;
move them from osdep.h to a new qemu/mprotect.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-3-peter.maydell@linaro.org
The function qemu_madvise() and the QEMU_MADV_* constants associated
with it are used in only 10 files. Move them out of osdep.h to a new
qemu/madvise.h header that is included where it is needed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220208200856.3558249-2-peter.maydell@linaro.org
