Tell PulseAudio to send recorded audio data in smaller chunks
than timer_period, so there's a good chance that qemu can read
recorded audio data every time it looks for new data.
PulseAudio tries to send buffer updates at a fragsize / 2 rate.
With fragsize = timer_period / 2 * 3 the update rate is 75% of
timer_period. The lower limit for the recording buffer size
maxlength is fragsize * 2.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-19-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently with the playback buffer attribute minreq = -1 and flag
PA_STREAM_EARLY_REQUESTS PulseAudio uses minreq = tlength / 4.
To improve audio playback with larger PulseAudio server side
buffers, limit minreq to a maximum of 75% of audio timer_rate.
That way there is a good chance qemu receives a stream buffer
size update before it tries to write data to the playback stream.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-18-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The audio buffer size in audio/paaudio.c is typically larger
than expected. Just comment the bugs in qpa_init_in() and
qpa_init_out() for now. Fixing these bugs may break glitch free
audio playback with fine tuned user audio settings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-17-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't call pa_stream_writable_size() in qpa_get_buffer_out()
before the playback stream is ready. This prevents a lot of the
following pulseaudio error messages.
pulseaudio: pa_stream_writable_size failed
pulseaudio: Reason: Bad state
To reproduce start qemu with
-parallel none -device gus,audiodev=audio0 -audiodev pa,id=audio0
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-15-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't call pa_stream_writable_size() in qpa_write() before the
playback stream is ready. This prevents a lot of the following
pulseaudio error messages.
pulseaudio: pa_stream_writable_size failed
pulseaudio: Reason: Bad state
To reproduce start qemu with
-parallel none -device gus,audiodev=audio0
-audiodev pa,id=audio0,out.mixing-engine=off
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-14-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pulseaudio backend currently converts, clips and copies audio
playback samples in the mixing-engine sample buffer multiple
times.
In qpa_get_buffer_out() the function pa_stream_begin_write()
returns a rather large buffer and this allows audio_pcm_hw_run_out()
in audio/audio.c to copy all samples in the mixing-engine buffer
to the pulse audio buffer. Immediately after copying, qpa_write()
notices with a call to pa_stream_writable_size() that pulse audio
only needs a smaller part of the copied samples and ignores the
rest. This copy and ignore process happens several times for each
audio sample.
To fix this behaviour, call pa_stream_writable_size() in
qpa_get_buffer_out() to limit the number of samples
audio_pcm_hw_run_out() will convert. With this change the
pulseaudio pcm_ops functions put_buffer_out and write are no
longer identical and a separate qpa_put_buffer_out is needed.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-13-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Break the unnecessary dependency of the generic buffer management
code on mixing-engine. This is required for the next patch.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-10-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add audio recording functions. SDL 2.0.5 or later is required to
use the recording functions. Playback continues to work with
earlier SDL 2.0 versions.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Split off pcm_ops function run_buffer_in from get_buffer_in and
call run_buffer_in before get_buffer_in.
The next patch only needs the generic buffer management part
from audio_generic_get_buffer_in().
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the modern audio functions it's possible to add new
features like audio recording.
As a side effect this patch fixes a bug where SDL2 can't be used
on Windows. This bug was reported on the qemu-devel mailing list at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg04043.html
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-7-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fill the remaining sample buffer with silence. To fill it with
zeroes is wrong for unsigned samples because this is silence
with a DC bias.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Always fill the remaining audio callback buffer with silence.
SDL 2.0 doesn't initialize the audio callback buffer. This was
an incompatible change compared to SDL 1.2. For reference read
the SDL 1.2 to 2.0 migration guide.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every emulated audio device has a way to enable audio playback. Don't
start playback until the guest enables the audio device. This patch
keeps the SDL2 device pause state in sync with hw->enabled.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is a crackling noise with SDL2 audio playback.
Commit bcf19777df: "audio/sdlaudio: Allow audio playback with
SDL2" already mentioned the crackling noise.
Add an out.buffer-count option to give users a chance to select
sane settings for glitch free audio playback. The idea was taken
from the coreaudio backend.
The in.buffer-count option will be used with one of the next
patches.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 9315afe5-5958-c0b4-ea1e-14769511a9d5@t-online.de
Message-Id: <20210110100239.27588-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the property types and property macros implemented in
qdev-properties-system.c to a new qdev-properties-system.h
header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20201211220529.2290218-16-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Check whenever we actually found the spiceaudio driver
before flipping the can_be_default field.
Fixes: f0c4555edf ("audio: remove qemu_spice_audio_init()")
Buglink: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=977301
Reported-by: dann frazier <dann.frazier@canonical.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20201215081151.20095-1-kraxel@redhat.com>
This code (introduced in commit 1d14ffa97e, Oct 2005)
is likely unused since years. Time to remove it. If
the condition is true, simply call abort().
Suggested-by: Gerd Hoffmann <gerd@kraxel.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201210223506.263709-1-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The previous commit removed the last call site of
audio_is_cleaning_up(). Remove the now unused function.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Always stop audio playback and remove the playback callback when
QEMU exits.
On shut down the function coreaudio_fini_out() destroys the
coreaudio mutex but fails to stop audio playback and to remove the
audio playback callback, because function audio_is_cleaning_up()
always returns true when called from coreaudio_fini_out(). Now
there is a time window from pthread_mutex_destroy() to program
exit where Core Audio may call the audio playback callback which
tries to lock the destroyed coreaudio mutex. This leads to the
following error.
coreaudio: Could not lock voice for audioDeviceIOProc
Reason: Invalid argument
This bug was reported on the qemu-discuss mailing list.
https://lists.nongnu.org/archive/html/qemu-discuss/2020-10/msg00018.html
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every emulated audio device has a way to enable audio playback. Don't
start playback until the guest enables the audio device to keep the
Core Audio device run state in sync with hw->enabled.
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While the variable once was used to fake audio settings, since
commit ed2a4a7941 "audio: proper support for float samples in
mixeng" this is no longer true. Rename the variable to obt_as.
This is the same naming scheme as in audio/sdlaudio.c
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20201213130528.5863-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This change registers a bottom handler to close the JACK client
connection when a server shutdown signal is received. Without this
libjack2 attempts to "clean up" old clients and causes a use after free
segfault.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20201108063351.35804-2-geoff@hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Used for files which (with CONFIG_SPICE=y) depend on spice header files
to pick up some enum, but which do not depend on on the actual spice
shared library.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201014121120.13482-6-kraxel@redhat.com
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:
$ CC=clang CXX=clang++ ./configure ... && make
../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)
Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.
This patch was generated using:
$ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
sort -u >/tmp/changed_identifiers
$ for identifier in $(</tmp/changed_identifiers); do
sed -i "s%\<$identifier\>%q$identifier%g" \
$(git grep -I -l "\<$identifier\>")
done
I manually fixed line-wrap issues and misaligned rST tables.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
Handle the spice special case in audio_init instead.
With the qemu_spice_audio_init() symbol dependency being
gone we can build spiceaudio as module.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200916084117.21828-2-kraxel@redhat.com
Run the downstream playback queue even if there are no samples
in the mixing engine buffer. The downstream queue may still have
queued samples.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-7-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function audio_generic_write should work exactly like
audio_pcm_hw_run_out. It's a very similar function working on a
different buffer.
This patch significantly reduces the number of drop-outs with
the DirectSound backend. To hear the difference start qemu with
-audiodev dsound,id=audio0,out.mixing-engine=off and play a
song in the guest with and without this patch.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-6-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes unnecessary calls to the pcm_ops function
put_buffer_in(). No audio backend needs this call if the
returned length of pcm_ops function get_buffer_in() is zero.
For the DirectSound backend this prevents a call to
dsound_unlock_in() without a preceding call to dsound_lock_in().
While Windows doesn't complain it seems wrong anyway.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function audio_generic_read should work exactly like
audio_pcm_hw_run_in. It's a very similar function working
on a different buffer.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The playback rate with the spiceaudio backend is currently too
fast if there's no spice client connected or the spice client
can't play audio. Rate limit the audio playback stream in all
cases. To calculate the rate correctly the limiter has to know
the maximum buffer size.
Fixes: 8c198ff065 ("spiceaudio: port to the new audio backend api")
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch allows the audio backends get_buffer_out() functions
to drop audio data and mitigates a bug reported on the qemu-devel
mailing list.
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03832.html
The new rules for the variables buf and size returned by
get_buffer_out() are:
size == 0: Downstream playback buffer is full. Retry later.
size > 0, buf != NULL: Copy size bytes to buf for playback.
size > 0, buf == NULL: Drop size bytes.
The audio playback rate with spiceaudio for the no audio case is
too fast, but that's what we had before commit fb35c2cec5
"audio/dsound: fix invalid parameters error". The complete fix
comes with the next patch.
Reported-by: Qi Zhou <atmgnd@outlook.com>
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the next patch all audio backends put_buffer_out() functions
have to handle the buf == NULL case, provided the get_buffer_out()
function may return buf = NULL and size > 0.
It turns out that all audio backends get_buffer_out() functions
either can't return buf = NULL or return buf = NULL and size = 0
at the same time. The only exception is the spiceaudio backend
where size may be uninitialized.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200920171729.15861-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I found that there are many spelling errors in the comments of qemu,
so I used the spellcheck tool to check the spelling errors
and finally found some spelling errors in the folder.
Signed-off-by: zhaolichang <zhaolichang@huawei.com>
Reviewed-by: Alex Bennee <alex.bennee@linaro.org>
Message-Id: <20200917075029.313-2-zhaolichang@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tracked down with the help of scripts/cleanup-trace-events.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20200806141334.3646302-4-armbru@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path. In particular the tracing headers are using
$(build_root)/$(<D).
In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".
This patch is too ugly to be applied to the Makefiles now. It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In function oss_read() a read error currently does not exit the
read loop. With no data to read the variable pos will quickly
underflow and a subsequent successful read overwrites memory
outside the buffer. This patch adds the missing break statement
to the error path of the function.
To reproduce start qemu with -audiodev oss,id=audio0 and in the
guest start audio recording. After some time this will trigger
an exception.
Fixes: 3ba4066d08 "ossaudio: port to the new audio backend api"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200707180836.5435-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
See recent commit "error: Document Error API usage rules" for
rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-18-armbru@redhat.com>
Instead of checking for the audodev state in each code path, centralize
the check into the initialize function itself to make it safe to call it
at any time.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-7-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When the guest closes the audio device we must start dropping input
samples from JACK and zeroing the output buffer samples. Failure to do
so causes sound artifacts during operations such as guest OS reboot, and
causes a hang of the input pipeline breaking it until QEMU is restated.
Closing and reconnecting to JACK was tested during these enable/disable
calls which works well for Linux guests, however Windows re-opens the
audio hardware repeatedly even when doing simple tasks like playing a
system sounds. As such it was decided it is better to feed silence to
JACK while the device is disabled.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-6-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This fixes a hang when there is a communications issue with the JACK
server. Simply closing the connection is enough to completely clean up
and as such we do not need to remove the ports first. As JACK uses a
socket based protocol that relies on the `select` call, if there is a
communication breakdown with the server the client library waits
forever for a response to the unregister request.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-5-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Initial code for JACK did not support audio input and as such this
boolean was set to let QEMU know, however JACK ended up including input
support making this invalid. Further investigation shows it was invalid
to set it in the first instance anyway due to a failure on my part
understand properly what this was for when the audodev was initially
developed.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-4-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
JACK does not provide us with the configured buffer size until after
activiation which was overriding this minimum value. JACK itself doesn't
have this minimum limitation, but the QEMU virtual hardware and as such
it must be enforced, failure to do so results in audio discontinuities.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-id: 20200613040518.38172-2-geoff@hostfission.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The buffer is the captured input to pass to backends.
As we should not modify it, mark the argument const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200505132603.8575-3-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The samples are the input to convert to u64. As we should
not modify them, mark the argument const.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200505132603.8575-2-f4bug@amsat.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 571a8c522e caused the HMP wavcapture command to segfault when
processing audio data in audio_pcm_sw_write(), where a NULL
sw->hw->pcm_ops is dereferenced. This fix checks that the pointer is
valid before dereferincing it. A similar fix is also made in the
parallel function audio_pcm_sw_read().
Fixes: 571a8c522e (audio: split ctl_* functions into enable_* and
volume_*)
Signed-off-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200521172931.121903-1-brogers@suse.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code in CONV_NATURAL_FLOAT() and CLIP_NATURAL_FLOAT()
seems to use the constant 2^31-0.5 to convert float to integer
and back. But the float type lacks the required precision and
the constant used for the conversion is 2^31. This is equiva-
lent to a [-1.f, 1.f] <-> [INT32_MIN, INT32_MAX + 1] mapping.
This patch explicitly writes down the used constant. The
compiler generated code doesn't change.
The constant 2^31 has an exact float representation and the
clang 10 compiler stops complaining about an implicit int to
float conversion with a changed value.
A few notes:
- The conversion of 1.f to INT32_MAX + 1 doesn't overflow. The
type of the destination variable is int64_t.
- At a later stage one of the clip_* functions in
audio/mixeng_template.h limits INT32_MAX + 1 to the integer
range.
- The clip_natural_float_* functions in audio/mixeng.c convert
INT32_MAX and INT32_MAX + 1 to 1.f.
Buglink: https://bugs.launchpad.net/bugs/1878627
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200523201712.23908-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit adds a new audiodev backend to allow QEMU to use JACK as
both an audio sink and source.
Signed-off-by: Geoffrey McRae <geoff@hostfission.com>
Message-Id: <20200512101603.E3DB73A038E@moya.office.hostfission.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch prevents an underflow of variable samples in function
audio_pcm_hw_run_in(). See commit 599eac4e5a "audio:
audio_generic_get_buffer_in should honor *size". This time the
while loop in audio_pcm_hw_run_in() will terminate nevertheless,
because it seems the recording stream in Windows is always rate
limited.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200405075017.9901-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
IDirectSoundCaptureBuffer_Lock() fails on Windows when called
with len = 0. Return early from dsound_get_buffer_in() in this
case.
To reproduce the warning start a linux guest. In the guest
start Audacity and you will see a lot of "Could not lock
capture buffer" warnings.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200405075017.9901-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the DirectSound backend fails to stop audio playback
in dsound_enable_out(). To detect a lost buffer condition
dsound_get_status_out() incorrectly uses the error code
DSERR_BUFFERLOST instead of flag DSBSTATUS_BUFFERLOST as a mask
and returns with an error. As a result dsound_enable_out()
returns early and doesn't stop playback.
To reproduce the bug start qemu on a Windows host with
-soundhw pcspk -audiodev dsound,id=audio0. On the guest
FreeDOS 1.2 command line enter beep. The image Day 1 - F-Bird
from the QEMU Advent Calendar 2018 shows the bug as well.
Buglink: https://bugs.launchpad.net/qemu/+bug/1699628
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200405075017.9901-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The current positive limit for the saturation nonlinearity is
only correct if the type of the result has 8 bits or less.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the internal float range of the mixing engine is
[-.5f, .5f]. PulseAudio, SDL2 and libasound use a [-1.f, 1.f]
range. This means with float samples the audio playback volume
is 6dB too low and audio recording signals will be clipped in
most cases.
To avoid another scaling factor in the conv_natural_float_* and
clip_natural_float_* functions with FLOAT_MIXENG defined this
patch changes the mixing engine float range to [-1.f, 1.f].
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Change the clip_natural_float_from_mono() function in
audio/mixeng.c to be consistent with the clip_*_from_mono()
functions in audio/mixeng_template.h.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes the naming scheme of the FLOAT_CONV_TO and
FLOAT_CONV_FROM macros to the scheme used in mixeng_template.h.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200308193321.20668-2-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: 286a5d201e
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200218094402.26625-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This adds proper support for float samples in mixeng by adding a new
audio format for it.
Limitations: only native endianness is supported. None of the virtual
sound cards support float samples (it looks like most of them only
support 8 and 16 bit, only hda supports 32 bit), it is only used for the
audio backends (i.e. host side).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 8a8b0b5698401b78d3c4c8ec90aef83b95babb06.1580672076.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are reports that since commit 2ceb8240fa "coreaudio: port
to the new audio backend api" audio playback with CoreAudio is
broken. This patch reverts some parts the commit.
Because of changes in the audio subsystem the audio clip
function in v4.1.0 of coreaudio.c had to be moved to mixeng.c
and the generic buffer management code needed a hint about the
size of the float type.
This patch is based on a patch from Zoltán Kővágó found at
https://lists.nongnu.org/archive/html/qemu-devel/2020-01/msg02142.html.
Fixes: 2ceb8240fa "coreaudio: port to the new audio backend api"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200202140641.4737-1-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Windows (unlike wine) bails out when IDirectSoundBuffer8::Lock is called
with zero length. Also, hw->pos_emul handling was incorrect when
calling this function for the first time.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reported-by: KJ Liew <liewkj@yahoo.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Message-id: fe9744216d9d421a2dbb09bcf5fa0dbd18f77ac5.1580684275.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The function generic_get_buffer_in currently ignores the *size
parameter and may return a buffer larger than *size.
As a result the variable samples in function
audio_pcm_hw_run_in may underflow. The while loop then most
likely will never termiate.
Buglink: http://bugs.debian.org/948658
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-9-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is no way to disable poll mode in
oss_enable_out and oss_enable_in when it was enabled before.
The enable code path always resets the poll mode state variable.
Fixes: b027a538c6 "oss: Remove unused error handling of qemu_set_fd_handler"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-8-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With audiodev parameter out.mixing-engine=off hw->mix_buf is
NULL. This patch reverts a small part of dc88e38fa7 "audio:
unify input and output mixeng buffer management".
To reproduce the problem start qemu with
-audiodev oss,id=audio0,try-mmap=on,out.mixing-engine=off
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-6-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The combined generic buffer management code and buffer run out
code in function audio_generic_put_buffer_out has a problematic
behaviour. A few hundred milliseconds after playback starts the
mixing buffer and the generic buffer are nearly full and the
following pattern can be seen.
On first call of audio_pcm_hw_run_out the buffer run code in
audio_generic_put_buffer_out writes some data to the audio
hardware but the generic buffer will fill faster and is full
when audio_pcm_hw_run_out returns. This is because emulated
audio devices can produce playback data at a higher rate than
the audio backend hardware consumes this data.
On next call of audio_pcm_hw_run_out the buffer run code in
audio_generic_put_buffer_out writes some data to the audio
hardware but no audio data is transferred to the generic buffer
because the buffer is already full.
Then the pattern repeats. For the emulated audio device this
looks like the audio timer period has doubled.
This patch splits the combined generic buffer management code
and buffer run out code and calls the buffer run out code after
buffer management code to break this pattern.
The bug report is for the wav audio backend. But the problem is
not limited to this backend. All audio backends which use the
audio_generic_put_buffer_out function show this problem.
Buglink: https://bugs.launchpad.net/qemu/+bug/1858488
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-5-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With audiodev parameter out.mixing-engine=off hw->mix_buf is
NULL. This leads to a segmentation fault in
AUD_get_buffer_size_out. This patch reverts a small part of
dc88e38fa7 "audio: unify input and output mixeng buffer
management".
To reproduce the problem start qemu with
-soundhw adlib -audiodev pa,id=audio0,out.mixing-engine=off
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-4-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The unused variables were last used before commit 49ddd7e122
"paaudio: port to the new audio backend api".
Fixes: 49ddd7e122
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-3-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It seems the function audio_generic_read started as a copy of
function audio_generic_write and some necessary changes were
forgotten. Fix the mixed up source and destination pointers and
rename misnamed variables.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-2-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pcm_ops function put_buffer_out expects the returned pointer
of function get_buffer_out as argument. Fix this.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20200123074943.6699-1-vr_qemu@t-online.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes: 3ba4066d08 ("ossaudio: port to the new audio backend api")
Reported-by: ziming zhang <ezrakiez@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20200120101804.29578-1-kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
When building with GCC9 using CFLAG -Wimplicit-fallthrough=2 we get:
audio/audio.c: In function ‘audio_pcm_init_info’:
audio/audio.c:306:14: error: this statement may fall through [-Werror=implicit-fallthrough=]
306 | sign = 1;
| ~~~~~^~~
audio/audio.c:307:5: note: here
307 | case AUDIO_FORMAT_U8:
| ^~~~
cc1: all warnings being treated as errors
Similarly to e46349414, add the missing fall through comment to
hint GCC.
Fixes: 2b9cce8c8c
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20191218192526.13845-2-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tell the compiler to do a 32bit * 32bit -> 64bit multiplication
because period_ticks is a 64bit variable. The overflow occurs
for audio timer periods larger than 4294967us.
Fixes: be1092afa0 "audio: fix audio timer rate conversion bug"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 8893a235-66a8-8fbe-7d95-862e29da90b1@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Don't call pa_stream_peek before the recording stream is ready.
Information to reproduce the problem.
Start and stop Audacity in the guest several times because the
problem is racy.
libvirt log file:
-audiodev pa,id=audio0,server=localhost,out.latency=30000,
out.mixing-engine=off,in.mixing-engine=off \
-sandbox on,obsolete=deny,elevateprivileges=deny,spawn=deny,
resourcecontrol=deny \
-msg timestamp=on
: Domain id=4 is tainted: custom-argv
char device redirected to /dev/pts/1 (label charserial0)
audio: Device pcspk: audiodev default parameter is deprecated,
please specify audiodev=audio0
audio: Device hda: audiodev default parameter is deprecated,
please specify audiodev=audio0
pulseaudio: pa_stream_peek failed
pulseaudio: Reason: Bad state
pulseaudio: pa_stream_peek failed
pulseaudio: Reason: Bad state
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-5-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no guarantee a single call to pa_stream_peek every
timer_period microseconds can read a recording stream faster
than the data gets produced at the source. Let qpa_read try to
drain the recording stream.
To reproduce the problem:
Start qemu with -audiodev pa,id=audio0,in.mixing-engine=off
On the host connect the qemu recording stream to the monitor of
a hardware output device. While the problem can also be seen
with a hardware input device, it's obvious with the monitor of
a hardware output device.
In the guest start audio recording with audacity and notice the
slow recording data rate.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-4-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Every call to pa_stream_peek which returns a data length > 0
should have a corresponding pa_stream_drop. A call to qpa_read
does not necessarily call pa_stream_drop immediately after a
call to pa_stream_peek. Test in qpa_fini_in if a last
pa_stream_drop is needed.
This prevents following messages in the libvirt log file after
a recording stream gets closed and a new one opened.
pulseaudio: pa_stream_drop failed
pulseaudio: Reason: Bad state
pulseaudio: pa_stream_drop failed
pulseaudio: Reason: Bad state
To reproduce start qemu with
-audiodev pa,id=audio0,in.mixing-engine=off
and in the guest start and stop Audacity several times.
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Message-id: 20200104091122.13971-3-vr_qemu@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With current code audio recording with all audio backends
except PulseAudio and DirectSound is broken. The generic audio
recording buffer management forgot to update the current read
position after a read.
Fixes: ff095e5231 "audio: api for mixeng code free backends"
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Zoltán Kővágó <DirtY.iCE.hu@gmail.com>
Message-id: 2fc947cf-7b42-de68-3f11-cbcf1c096be9@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Which currently only means removing some checks. Old code won't require
more than two channels, but new code will need it.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 7e53be1f97e939ed3bb729ef39e76b775643118a.1570996490.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The bit shifting trick worked because the number of bytes per frame was
always a power-of-two (since QEMU only supports mono, stereo and 8, 16
and 32 bit samples). But if we want to add support for surround sound,
this no longer holds true.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 1351fd9bcce0ff20d81850c5292722194329de02.1570996490.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This can be used to identify stream in tools like pavucontrol when one
creates multiple -audiodevs or runs multiple qemu instances.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 2d6e337c474ac84172d0809e6959c26b21d48120.1568157545.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Connection name was previously erroneously set to the server socket
path, while connection names were simply "qemu". After this patch, the
connection name will be the vm name (falling back to "qemu" if not
specified), while stream names will be the audiodev's id.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 3d139426031a400a68d440608ba5e43f0e116cd8.1568157545.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This way we no longer need vararg functions, improving compile time
error detection. Also now it's possible to check actually what commands
are supported, without needing to manually update ctl_caps.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 2b08b3773569c5be055d0a0fb2f29ff64e79f0f4.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This commit removes the ad-hoc rate-limiting code from noaudio and
wavaudio, and replaces them with a (slightly modified) code from
spiceaudio. This way multiple write calls (for example when the
circular buffer wraps around) do not cause problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: fd0fe5b95b13fa26d09ae77a72f99d0ea411de14.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Usage notes: hw->samples became hw->{mix,conv}_buf->size, except before
initialization (audio_pcm_hw_alloc_resources_*), hw->samples gives the
initial size of the STSampleBuffer. The next commit tries to fix this
inconsistency.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: a78caeb2eeb6348ecb45bb2c81709570ef8ac5b3.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This will make it possible to skip mixeng with audio playback and
recording, allowing us to free ourselves from the limitations of the
current mixeng (stereo, int64 samples only). In this case, HW and SW
voices will be essentially the same, for every SW voice we will create
a HW voice, since we can no longer mix multiple voices together.
Some backends expect us to call a function when we have data ready
write()/read() style, while others provide a buffer and expects us to
directly write/read it, so for optimal performance audio_pcm_ops provide
methods for both cases. Previously backends asked mixeng for more data
in run_out/run_it, now instead mixeng or the frontends will call the
backends, so that's why two sets of functions required. audio.c
contains glue code between the two styles, so backends only ever have to
implement one style and frontends are free to call whichever is more
convenient for them.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 15a33c03a62228922d851f7324c52f73cb8d2414.1568927990.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unfortunately, changes introduced in af2041ed2d "audio: audiodev=
parameters no longer optional when -audiodev present" breaks backward
compatibility. This patch changes the error into a deprecation warning.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 02d4328c33455742d01e0b62395013e95293c3ba.1566847960.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code used sizeof(AudiodevAlsaPerDirectionOptions) instead of the
appropriate per direction options for the audio backend. If the size of
the actual audiodev's per direction options are larger than alsa's, it
could cause a buffer overflow.
However, alsa has three fields in per direction options: a string, an
uint32 and a bool. Oss has the same fields, coreaudio has a single
uint32, paaudio has a string and an uint32, all other backends only use
the common options, so currently no per direction options struct should
be larger than alsa's.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-Id: <7808bc816ba7da8b8de8a214713444d85f7af3c6.1566847960.git.DirtY.iCE.hu@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
They just called audio_pcm_sw_read/write anyway, so it makes no sense
to have them too. (The noaudio's read is the only exception, but it
should work with the generic code too.)
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 92ddc98133bc4b687c6e4608b9321e7b64c0e496.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pulseaudio normally assumes that when the server wants it, the client
can generate the audio samples and send it right away. Unfortunately
this is not the case with QEMU -- it's up to the emulated system when
does it generate the samples. Buffering the samples and sending them
from a background thread is just a workaround, that doesn't work too
well. Instead enable pa's compatibility support and let pa worry about
the details.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: aa4e3613122ccbaa62b1feb4e427260731f7477c.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
audio_run is called manually by alsa and oss backends when polling.
In this case only the requesting backend should be run, not all of them.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 10221fcea2028fa18d95cf531526ffe3b1d9b21a.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There's already a MIN and MAX macro in include/qemu/osdep.h, use them
instead.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 303222477df6f7373217e0df768635fab5855745.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unless we disable stream moving, pulseaudio can easily move the stream
on connect, effectively ignoring the source/sink specified by the user.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: c245929463e6e46a48b2875a150815e2ccba11b4.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This means you should probably stop using -soundhw (as it doesn't allow
you to specify any options) and add the device manually with -device.
The exception is pcspk, it's currently not possible to manually add it.
To use it with audiodev, use something like this:
-audiodev id=foo,... -global isa-pcspk.audiodev=foo -soundhw pcspk
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 9072b955acffda13976bca7b61f86d7f708c9269.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Have a pool of refcounted connections per server, so if the user creates
multiple audiodevs to the same pa server, it will use a single connection. (It
will still create different streams, so the user can manage those streams
separately in pulseaudio.)
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: d43218f327c62cdbd16ea0c922612025fbc4805e.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Finally add audiodev= options to audio frontends so users can specify
which backend to use when multiple backends exist. Not specifying an
audiodev= option currently causes the first audiodev to be used, this is
fixed in the next commit.
Example usage: -audiodev pa,id=foo -device AC97,audiodev=foo
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: d64db52dda2d0e9d97bc5ab1dd9adf724280fea1.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio functions no longer access glob_audio_state, instead they get an
AudioState as a parameter. This is required in order to support
multiple backends.
glob_audio_state is also gone, and replaced with a tailq so we can store
more than one states.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 67aef54f9e729a7160fe95c465351115e392164b.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Remove glob_audio_state from functions, where possible without breaking
the API. This means that most static functions in audio.c now take an
AudioState pointer instead of implicitly using glob_audio_state. Also
included a pointer in SWVoice*, HWVoice* structs, so that functions
dealing them can know the audio state without having to pass it around
separately.
This is required in order to support multiple simultaneous audio
backends (added in a later commit).
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: b5e241f24e795267b145bcde7c6a72dd5e6037ea.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Several people have reported to have bag microphone lag with the PA
backend. While I cannot reproduce the problem here, it seems that their
PA somehow decides to buffer the microphone input for way too long,
causing this delay. This patch sets an upper limit to the amount of
data PA should hold. This fixes the problem reliably on their side,
while having no adverse effects on mine.
Signed-off-by: Martin Schrodt <martin@schrodt.org>
Message-id: 20190615153852.99040-1-martin@schrodt.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Currently the default audio timer frequency is 10000Hz instead of
a period of 10000us. Also the audiodev timer-period property gets
converted like a frequency. Only handling of the legacy
QEMU_AUDIO_TIMER_PERIOD environment variable is correct because
it's actually a frequency.
With this patch the property timer-period is really a timer period
and QEMU_AUDIO_TIMER_PERIOD remains a frequency.
Fixes: 71830221fb "-audiodev command line option basic implementation."
Signed-off-by: Volker Rümelin <vr_qemu@t-online.de>
Reviewed-by: Zoltán Kővágó <DirtY.iCE.hu@gmail.com>
Message-id: 90b95e4f-39ef-2b01-da6a-857ebaee1ec5@t-online.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The current code does not specify the metrics of the buffers for the
input device. This makes PulseAudio choose very bad defaults, which
causes input to be unusable: Audio put in gets out 30 seconds later.
This patch fixes that and makes the latency configurable as well.
Signed-off-by: Martin Schrodt <martin@schrodt.org>
Message-id: 20190315084653.120020-4-martin@schrodt.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The latency of a connection to the PulseAudio server is determined by
the tlength parameter. This was hardcoded to 10ms, which is a bit too
tight on my machine, causing audio on host and guest to malfunction.
A setting of 15ms works fine here. To allow tweaking, I also made the
setting configurable via the new -audiodev config. This allows to squeeze out better timings in scenarios where the emulation allows it.
I also removed setting of the minreq parameter to (seemingly arbitrary) half the latency, since it showed worse audio quality during my tests. Allowing PulseAudio to request smaller chunks helped.
Signed-off-by: Martin Schrodt <martin@schrodt.org>
Message-id: 20190315084653.120020-3-martin@schrodt.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audiodev configuration allows to set the length of the buffered data.
The setting was ignored and a constant value used instead.
This patch makes the code apply the setting properly, and uses the
previous default if nothing is supplied.
Signed-off-by: Martin Schrodt <martin@schrodt.org>
Message-id: 20190315084653.120020-2-martin@schrodt.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Audio drivers now get an Audiodev * as config paramters, instead of the
global audio_option structs. There is some code in audio/audio_legacy.c
that converts the old environment variables to audiodev options (this
way backends do not have to worry about legacy options). It also
contains a replacement of -audio-help, which prints out the equivalent
-audiodev based config of the currently specified environment variables.
Note that backends are not updated and still rely on environment
variables.
Also note that (due to moving try-poll from global to backend specific
option) currently ALSA and OSS will always try poll mode, regardless of
environment variables or -audiodev options.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: e99a7cbdac0d13512743880660b2032024703e4c.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
I had to include an enum for audio sampling formats into qapi, but that
meant duplicating the audfmt_e enum. This patch replaces audfmt_e and
associated values with the qapi generated AudioFormat enum.
This patch is mostly a search-and-replace, except for switches where the
qapi generated AUDIO_FORMAT_MAX caused problems.
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 01251b2758a1679c66842120b77c0fb46d7d0eaf.1552083282.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At the end of the while-loop, either "samples" or "sdl->live" is zero, so
now that we've removed the semaphore code, the content of the while-loop
is always only executed once. Thus we can remove the while-loop now to
get rid of one indentation level here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1549336101-17623-3-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The semaphore code was only working with SDL1.2 - with SDL2, it causes
a deadlock. Since we've removed support for SDL1.2 recently, we can
now completely remove the semaphore code from sdlaudio.c.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 1549336101-17623-2-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
audio_calloc uses g_malloc0 which never returns in case of
memory failure.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20190225154335.11397-2-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of using lot of low level function and manually allocate
the temporary string in audio_process_options use more high
level GLib function. The function is not used in hot path but to
read some initial setting.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Message-id: 20190225154335.11397-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kill off a pile of monitor_printf's and cur_mon usage.
The only one left in wavcapture.c is the info case.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20170320173840.3626-3-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Only print a message about the failed driver initialization in case it
was the driver explicitly requested by the user via QEMU_AUDIO_DRV=$drv.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190124112055.547-6-kraxel@redhat.com
Check whenever the pulseaudio daemon pidfile is present before trying to
initialize the pulseaudio backend. Just return NULL if that is not the
case, so qemu will check the next backend in line.
In case the user explicitly configured a non-default pulseaudio server
skip the check.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190124112055.547-5-kraxel@redhat.com
Files requiring AudioState already include "audio_int.h".
To clean "qemu/typedefs.h", move the declaration to "audio_int.h"
(removing the forward declaration).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Both GCC v4.8 and Clang v3.4 support the -Waddress option, so we do
not need the compiler version check here anymore.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The rate of pulseaudio absorbing the audio stream is used to control the
the rate of the guests audio stream. When the emulated hardware uses
small chunks (like intel-hda does) we need small chunks on the audio
backend side too, otherwise that feedback loop doesn't work very well.
Cc: Max Ehrlich <maxehr@umiacs.umd.edu>
Cc: Martin Schrodt <martin@schrodt.org>
Buglink: https://bugs.launchpad.net/bugs/1795527
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181109142032.1628-1-kraxel@redhat.com
Make audio_driver_lookup() try load the module in case it doesn't find
the driver in the registry. Also load all modules for -audio-help, so
the help output includes the help text for modular audio drivers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180306074053.22856-3-kraxel@redhat.com
Add registry for audio drivers, using the existing audio_driver struct.
Make all drivers register themself. The old list of audio_driver struct
pointers is now a list of audio driver names, specifying the priority
(aka probe order) in case no driver is explicitly asked for.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180306074053.22856-2-kraxel@redhat.com
This avoids a name clash for CONFIG_SDL, which is used by both sdl video
support and sdl audio support. It also more clear that this is a audio
driver configuration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20180301100547.18962-13-kraxel@redhat.com
This cleanup makes the number of objects depending on qapi/error.h
drop from 1910 (out of 4743) to 1612 in my "build everything" tree.
While there, separate #include from file comment with a blank line,
and drop a useless comment on why qemu/osdep.h is included first.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-5-armbru@redhat.com>
[Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
Apparently we don't use __MSC_VER as a compiler anymore and we always
require a C99 compiler (which means we always have __func__) so we don't
need a special AUDIO_FUNC macro. We can just replace AUDIO_FUNC with
__func__ instead.
Checkpatch failures were manually fixed.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180203084315.20497-2-armbru@redhat.com>
The point of writing a macro embedded in a 'do { ... } while (0)'
loop (particularly if the macro has multiple statements or would
otherwise end with an 'if' statement) is so that the macro can be
used as a drop-in statement with the caller supplying the
trailing ';'. Although our coding style frowns on brace-less 'if':
if (cond)
statement;
else
something else;
that is the classic case where failure to use do/while(0) wrapping
would cause the 'else' to pair with any embedded 'if' in the macro
rather than the intended outer 'if'. But conversely, if the macro
includes an embedded ';', then the same brace-less coding style
would now have two statements, making the 'else' a syntax error
rather than pairing with the outer 'if'. Thus, even though our
coding style with required braces is not impacted, ending a macro
with ';' makes our code harder to port to projects that use
brace-less styles.
The change should have no semantic impact. I was not able to
fully compile-test all of the changes (as some of them are
examples of the ugly bit-rotting debug print statements that are
completely elided by default, and I didn't want to recompile
with the necessary -D witnesses - cleaning those up is left as a
bite-sized task for another day); I did, however, audit that for
all files touched, all callers of the changed macros DID supply
a trailing ';' at the callsite, and did not appear to be used
as part of a brace-less conditional.
Found mechanically via: $ git grep -B1 'while (0);' | grep -A1 \\\\
Signed-off-by: Eric Blake <eblake@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20171201232433.25193-7-eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In trace format '#' flag of printf is forbidden. Fix it to '0x%'.
This patch is created by the following:
check that we have a problem
> find . -name trace-events | xargs grep '%#' | wc -l
56
check that there are no cases with additional printf flags before '#'
> find . -name trace-events | xargs grep "%[-+ 0'I]+#" | wc -l
0
check that there are no wrong usage of '#' and '0x' together
> find . -name trace-events | xargs grep '0x%#' | wc -l
0
fix the problem
> find . -name trace-events | xargs sed -i 's/%#/0x%/g'
[Eric Blake noted that xargs grep '%[-+ 0'I]+#' should be xargs grep
"%[-+ 0'I]+#" instead so the shell quoting is correct.
--Stefan]
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20170731160135.12101-3-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the move of some docs/ to docs/devel/ on ac06724a71,
no references were updated.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
If a voice recording equipment is opened for a long time(several days)
in windows guest, rate->ipos will overflow and rate->opos will never
have a chance to change. It will result to a infinite loop.
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
Signed-off-by: Wang Yechao <wang.yechao255@zte.com.cn>
Message-id: 1500128061-20849-1-git-send-email-peng.hao2@zte.com.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When compiling with SDL2, the semaphore trick used in sdlaudio.c
does not work - QEMU locks up completely in this case. To avoid
the hang and get at least some audio playback up and running (it's
a little bit crackling, but better than nothing), we can use the
SDL locking functions SDL_LockAudio() and SDL_UnlockAudio() to sync
with the sound playback thread instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-id: 1485852398-2327-1-git-send-email-thuth@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes resetting strategy of the audio polling timer.
It does not change expiration time if the timer is already set.
This patch is needed to make this timer deterministic and to use execution
record/replay for audio devices.
audio_reset_timer is used in the function audio_vm_change_state_handler.
Therefore every time VM is stopped or restarted the timer will be reset
to new timeout. Virtual clock does not proceed while VM is stopped.
Therefore there is no need in resetting the timeout when VM restarts.
v2: updated commit message
v3: now using timer_mod_anticipate function (as suggested by Yurii Zubrytskyi)
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170214071510.6112.76764.stgit@PASHA-ISP
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds recording and replaying audio data. Is saves synchronization
information for audio out and inputs from the microphone.
v2: removed unneeded whitespace change
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170202055054.4848.94901.stgit@PASHA-ISP.lan02.inno
[ kraxel: add qemu/error-report.h include to fix osx build failure ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since aa5cb7f5e, the chardevs are being cleaned up when leaving qemu,
before the atexit() handlers. audio_cleanup() may use the monitor to
notify of changes. For compatibility reasons, let's clean up audio
before the monitor so it keeps emitting monitor events.
The audio_atexit() function is made idempotent (so it can be called
multiple times), and renamed to audio_cleanup(). Since coreaudio
backend is using a 'isAtexit' code path, change it to check
audio_is_cleaning_up() instead, so the path is taken during normal
exit.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20160801112343.29082-3-marcandre.lureau@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Version: GnuPG v1
iQEcBAABAgAGBQJXaFInAAoJEJykq7OBq3PI6VsH/0Sfgbdo1RksYuQwb/y92sCW
EN+lxUZ+OLfgrc8PYgNZwfSM3rsfYhznL0MAXOeEe7Ahabi07w7DhGR8WvwfAOlI
G96FRuvrIPfv5u6U6fwS4CvG3TIHVLxfHKCsTpPUmH8U5CNx/x/tpjNiWN1dj6t+
sXybSjYHfZfiZy2tI9MFIFWCdxnF/pl0QAPhbRqc8Y/RQTDrPKRjLpz+nitN/u96
5TS7KlELyQuP91YMmLceYSmIkHbxW703h+iE2n4hov0uZCP8Jil+2Jsd3ziQSRlL
j6LqexQ2ViBGdDSfiZGYES2VPlsHOCwb4G+IgWBStfZg1ppaXENvcDzPrgrB+L4=
=eUnF
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
# gpg: Signature made Mon 20 Jun 2016 21:29:27 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request: (42 commits)
trace: split out trace events for linux-user/ directory
trace: split out trace events for qom/ directory
trace: split out trace events for target-ppc/ directory
trace: split out trace events for target-s390x/ directory
trace: split out trace events for target-sparc/ directory
trace: split out trace events for net/ directory
trace: split out trace events for audio/ directory
trace: split out trace events for ui/ directory
trace: split out trace events for hw/alpha/ directory
trace: split out trace events for hw/arm/ directory
trace: split out trace events for hw/acpi/ directory
trace: split out trace events for hw/vfio/ directory
trace: split out trace events for hw/s390x/ directory
trace: split out trace events for hw/pci/ directory
trace: split out trace events for hw/ppc/ directory
trace: split out trace events for hw/9pfs/ directory
trace: split out trace events for hw/i386/ directory
trace: split out trace events for hw/isa/ directory
trace: split out trace events for hw/sd/ directory
trace: split out trace events for hw/sparc/ directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move all trace-events for files in the audio/ directory to
their own file.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1466066426-16657-35-git-send-email-berrange@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Use Coccinelle script to replace 'ret = E; return ret' with
'return E'. The script will do the substitution only when the
function return type and variable type are the same.
Manual fixups:
* audio/audio.c: coding style of "read (...)" and "write (...)"
* block/qcow2-cluster.c: wrap line to make it shorter
* block/qcow2-refcount.c: change indentation of wrapped line
* target-tricore/op_helper.c: fix coding style of
"remainder|quotient"
* target-mips/dsp_helper.c: reverted changes because I don't
want to argue about checkpatch.pl
* ui/qemu-pixman.c: fix line indentation
* block/rbd.c: restore blank line between declarations and
statements
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1465855078-19435-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Unused Coccinelle rule name dropped along with a redundant comment;
whitespace touched up in block/qcow2-cluster.c; stale commit message
paragraph deleted]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
qemu/osdep.h checks whether MAP_ANONYMOUS is defined, but this check
is bogus without a previous inclusion of sys/mman.h. Include it in
sysemu/os-posix.h and remove it from everywhere else.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since pulseaudio 1.0 it's possible to set the individual stream volume
rather than setting the device volume. With this, setting hardware mixer
of a emulated sound card doesn't mess up the volume configuration of the
host.
A side effect is that this limits compatible pulseaudio version to 1.0
which was released on 2011-09-27.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 78853815be2069971b89b3a2e3181837064dd8f3.1462962512.git.pkrempa@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move it to the actual users. There are some inclusions of
qemu/host-utils.h in headers, but they are all necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move it to the actual users. There are still a few includes of
qemu/bswap.h in headers; removing them is left for future work.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move declarations out of qemu-common.h for functions declared in
utils/ files: e.g. include/qemu/path.h for utils/path.c.
Move inline functions out of qemu-common.h and into new files (e.g.
include/qemu/bcd.h)
Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch replaces get_ticks_per_sec() calls with the macro
NANOSECONDS_PER_SECOND. Also, as there are no callers, get_ticks_per_sec()
is then removed. This replacement improves the readability and
understandability of code.
For example,
timer_mod(fdctrl->result_timer,
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + (get_ticks_per_sec() / 50));
NANOSECONDS_PER_SECOND makes it obvious that qemu_clock_get_ns
matches the unit of the expression on the right side of the plus.
Signed-off-by: Rutuja Shah <rutu.shah.26@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453138432-8324-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
audio_init() should not use hw_error(), because dumping CPU registers
is unhelpful there, and aborting is wrong, because it can be called
called from an audio device's realize() method.
The two uses of hw_error() come from commit 0d9acba:
* When qemu_new_timer() fails. It couldn't fail back then, and it
can't fail now. Drop the unreachable error handling.
* When no_audio_driver can't be initialized. It couldn't fail back
then, and it can't fail now. Replace the error handling by an
assertion.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@pond.sub.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
The AudioDeviceAddIOProc() and AudioDeviceRemoveIOProc() functions were
deprecated in OSX 10.5. Since we don't support any earlier versions of
OSX, we can simply replace them with the new APIs
AudioDeviceCreateIOProcID() and AudioDeviceRemoveIOProcID().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-6-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use the new-in-OSX 10.6 API AudioObjectGetPropertyData() instead
of the deprecated AudioDeviceGetProperty() and AudioDeviceSetProperty()
functions when possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-5-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The CoreAudio APIs AudioDeviceGetProperty and AudioDeviceSetProperty are
deprecated from OSX 10.6, so factor out our calls to them so we can
provide versions which use the replacement APIs on OSX newer than 10.5.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-4-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we're building for OSX 10.6 or better, use the new API
AudioObjectGetPropertyData for getting the default voice.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The CoreAudio function AudioHardwareGetProperty has been deprecated
starting with OSX 10.6, so factor out our call to it so we can
provide an equivalent with the new APIs when they exist.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1448747724-15572-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
