Scatter/gather functionality uses the newly added DMA helpers. The
device can choose between doing DMA itself, or calling scsi_req_data
as usual, which will use the newly added DMA helpers to copy piecewise
to/from the destination area(s).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the upcoming sglist support, HBAs will not see any transfer_data
call and will not have a way to detect short transfers. So pass the
residual amount of data upon command completion.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
More qdev printers could have been removed in the previous series, and
object_property_parse also made several parsers unnecessary. In fact,
the new code is even more robust with respect to overflows, so clean
them up!
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
object_property_parse lets us drop the legacy setters when their task
is done just as well by the string visitors.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hex properties are an obstacle to removal of old qdev string parsing, but
even here we can lay down the foundations for future simplification. In
general, they are rarely used and their printed form is more interesting
than the parsing. For example you'd usually set isa-serial.index
instead of isa-serial.iobase. And luckily our main client, libvirt
only cares about few of these, and always sets them with a 0x prefix.
So the series stops accepting bare hexadecimal numbers, preparing for
making legacy properties read-only in 1.3 or so. The read side will
stay as long as "info qtree" is with us.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Visitors allow a limited form of polymorphism. Exploit it to support
setting the non-legacy PCI address property both as a DD.F string
and as an 8-bit integer.
The 8-bit integer form is just too clumsy, it is unlikely that we will
ever drop it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add two properties to specify bar sizes in megabytes instead of bytes,
which is alot more user-friendly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no reason to require a minimum size of 16 MB for the vram.
Lower the limit to 4096 (one page). Make it disapper completely would
break guests.
We used to assure the guest surfaces were saved before migration by
setting the whole vram dirty. This patch sets dirty only the areas
that are actually used in the vram.
Signed-off-by: Yonit Halperin <yhalperi@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch fixes the local qxl renderer to not kick spice-server
in case the vm is stopped. First it is largely pointless because
we ask spice-server to process all not-yet processed commands when
the vm is stopped, so there isn't much do do anyway. Second we
avoid triggering an assert in spice-server.
The patch makes sure we still honor redraw requests, even if we don't
ask spice-server for updates. This is needed to handle displaysurface
changes with a stopped vm correctly.
With this patch applied it is possible to take screen shots (via
screendump monitor command) from a qxl gpu even in case the guest
is stopped.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This enables acceleration for MMIO-based TPR registers accesses of
32-bit Windows guest systems. It is mostly useful with KVM enabled,
either on older Intel CPUs (without flexpriority feature, can also be
manually disabled for testing) or any current AMD processor.
The approach introduced here is derived from the original version of
qemu-kvm. It was refactored, documented, and extended by support for
user space APIC emulation, both with and without KVM acceleration. The
VMState format was kept compatible, so was the ABI to the option ROM
that implements the guest-side para-virtualized driver service. This
enables seamless migration from qemu-kvm to upstream or, one day,
between KVM and TCG mode.
The basic concept goes like this:
- VAPIC PV interface consisting of I/O port 0x7e and (for KVM in-kernel
irqchip) a vmcall hypercall is registered
- VAPIC option ROM is loaded into guest
- option ROM activates TPR MMIO access reporting via port 0x7e
- TPR accesses are trapped and patched in the guest to call into option
ROM instead, VAPIC support is enabled
- option ROM TPR helpers track state in memory and invoke hypercall to
poll for pending IRQs if required
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This will allow the APIC core to file a TPR access report. Depending on
the accelerator and kernel irqchip mode, it will either be delivered
right away or queued for later reporting.
In TCG mode, we can restart the triggering instruction and can therefore
forward the event directly. KVM does not allows us to restart, so we
postpone the delivery of events recording in the user space APIC until
the current instruction is completed.
Note that KVM without in-kernel irqchip will report the address after
the instruction that triggered the access.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When an input line is handled as level-triggered, it will immediately
raise an IRQ on the output of a PIC again that goes through an init
reset. So only clear the edge-triggered inputs from IRR in that
scenario.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Instead of providing 4 individual query functions for mode, gate, output
and initial counter state, introduce a service that queries all
information at once. This comes with tiny additional costs for
pcspk_callback but with a much cleaner interface. Also, it will simplify
the implementation of the KVM in-kernel PIT model.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Convert the PC speaker device to a qdev ISA model. Move the public
interface to a dedicated header file at this chance.
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When the HPET enters legacy mode, the IRQ output of the PIT is
suppressed and replaced by the HPET timer 0. But the current code to
emulate this was broken in many ways. It reset the PIT state after
re-enabling, it worked against a stale static PIT structure, and it did
not properly saved/restored the IRQ output mask in the PIT vmstate.
This patch solves the PIT IRQ control in a different way. On x86, it
both redirects the PIT IRQ to the HPET, just like the RTC. But it also
keeps the control line from the HPET to the PIT. This allows to disable
the PIT QEMU timer when it is not needed. The PIT's view on the control
line state is now saved in the same format that qemu-kvm is already
using.
Note that, in contrast to the suppressed RTC IRQ line, we do not need to
save/restore the PIT line state in the HPET. As we trigger a PIT IRQ
update via the control line, the line state is reconstructed on mode
switch.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
HPET legacy emulation will require control over the PIT IRQ output. To
enable this, add support for an alternative IRQ output object to the PIT
factory function. If the isa_irq number is < 0, this object will be
used.
This also removes the IRQ number property from the PIT class as we now
use a generic GPIO output pin that is connected by the factory function.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move the public interface of the PIT into its own header file and update
all users.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In legacy mode, the HPET suppresses the RTC interrupt delivery via IRQ
8 but keeps track of the RTC output level and applies it when legacy
mode is turned off again. This value has to be preserved across save/
restore as it cannot be reconstructed otherwise.
To document that a raised rtc_irq_level won't survive a vmload without
a hpet/rtc_irq_level subsection, add an explicit clearing to the reset
handler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Avoid changing the IRQ level to high on reset as it may trigger spurious
events. Instead, open-code the effects of pit_load_count(0) in the reset
handler.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since QOM'ification, qdev_try_create() uses object_new() internally,
which asserts "type != NULL" when the type is not registered.
This was revealed by the combination of kvmclock's kvm_enabled() check
and early QOM type registration.
Check whether the class exists before calling object_new(), so that
the caller (e.g., qdev_create) can fail gracefully, telling us which
device could not be created.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <aliguori@codemonkey.ws>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* stefanha/trivial-patches:
linux-user: brk() debugging
virtio: Remove unneeded g_free() check in virtio_cleanup()
net: remove extra spaces in help messages
fmopl: Fix typo in function name
vl.c: Fix typo in variable name
ide: fix compilation errors when DEBUG_IDE is set
cpu-exec.c: Correct comment about this file and indentation cleanup
CODING_STYLE: Clarify style for enum and function type names
linux-user: fail execve() if env/args too big
Fix a typo in pl031_interrupt() which meant we were setting a bit
in the interrupt mask rather than the interrupt status register
and thus not actually raising an interrupt. This fix allows the
rtctest program from the kernel's Documentation/rtc.txt to pass
rather than hanging.
Reported-by: Daniel Forsgren <daniel.forsgren@enea.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
The primecell.h header now only has the definitions of constants
indicating the usage of the arm_sysctl GPIO lines; remove obsolete
includes of it from source files which don't care about those GPIO
lines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove an obsolete declaration of pl080_init(), which has been
incorrect since the conversion of pl080 to qdev back in 2009.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Drop the legacy init function arm_sysctl_init(), since it has no
users left any more. This allows us to drop the awkward '1' from
the actual device init function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Add the vexpress-a15 machine, and the A-Series memory map it uses.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
The arm_boot secondary boot loader code needs the address of
the GIC CPU interface. Obtaining this from the base address
of the private peripheral region was possible for A9 and 11MPcore,
but the A15 puts the GIC CPU interface in a different place.
So make boards pass in the GIC CPU interface address directly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Instantiate the CLCD on the vexpress motherboard as well as one on
the daughterboard -- the A15 daughterboard does not have a CLCD
and so relies on the motherboard one.
At the moment QEMU doesn't provide infrastructure for selecting
which display device gets to actually show graphics -- the first
one registered is it. Fortunately this works for the major use
case (Linux): if the daughterboard has a CLCD it will come first
and be used, otherwise we fall back to the motherboard CLCD.
So we don't (currently) need to implement the control register
which allows software to tell the mux which video output to pass
through to the outside world.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Factor out daughterboard specifics into a data structure and
daughterboard initialization function, in preparation for adding
vexpress-a15 support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On real Versatile Express hardware, the boot ROM puts the secondary
CPU bootcode/holding pen in SRAM. We can therefore rely on Linux not
trashing this memory until secondary CPUs have booted up, and can
put our QEMU-specific pen code in the same place. This allows us to
drop the odd "hack" RAM page we were using before.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pull the addresses used for mapping motherboard peripherals into
memory out into a table. This will allow us to simply provide a
second table to implement the "Cortex-A Series" memory map used by
the A15 variant of Versatile Express, as well as the current
"Legacy" map used by A9.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Add a model of the Cortex-A15 memory mapped private peripheral
space. This is fairly simple because the only memory mapped
bit of the A15 is the GIC.
Note that we don't currently model a VGIC and therefore don't
map the VGIC related bits of the GIC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Exynos4210 display controller (FIMD) has 5 hardware windows with alpha and
chroma key blending functions.
Signed-off-by: Mitsyanko Igor <i.mitsyanko@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
SMDKC210 uses lan9215 chip, but lan9118 in 16-bit mode seems to
be enough.
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Patch adds basic model for Exynos4210 SoC PMU.
This model implements PMU registers just as a bulk of memory. Currently,
the only reason this device exists is that secondary CPU boot loader
uses PMU INFORM5 register as a holding pen.
Signed-off-by: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add basic support of exynos4210 UART
Signed-off-by: Maksim Kozlov <m.kozlov@samsung.com>
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add initial support of NURI and SMDKC210 boards
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The parameters initrd_size and base are already included
in the info parameter, so there is no need to pass them
separately.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>,
I noticed some unused code in the twl92230, probably from before
qdev-ification. This patch makes the machine use the chip's pwrbtn
signal.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
* kraxel/usb.38: (28 commits)
xhci: handle USB_RET_NAK
xhci: remote wakeup support
xhci: kill port arg from xhci_setup_packet
xhci: stop on errors
xhci: add trb type name lookup support.
xhci: signal low- and fullspeed support
usb: add USBBusOps->wakeup_endpoint
usb: pass USBEndpoint to usb_wakeup
usb: maintain async packet list per endpoint
usb: Set USBEndpoint in usb_packet_setup().
usb: add USBEndpoint->{nr,pid}
usb: USBPacket: add status, rename owner -> ep
usb: fold usb_generic_handle_packet into usb_handle_packet
usb: kill handle_packet callback
usb-xhci: switch to usb_find_device()
usb-musb: switch to usb_find_device()
usb-ohci: switch to usb_find_device()
usb-ehci: switch to usb_find_device()
usb-uhci: switch to usb_find_device()
usb: handle dev == NULL in usb_handle_packet()
...
* kwolf/for-anthony:
AHCI: Masking of IRQs actually masks them
sheepdog: fix co_recv coroutine context
AHCI: Fix port reset race
rewrite QEMU_BUILD_BUG_ON
qcow2: Keep unknown header extension when rewriting header
qcow2: Update whole header at once
vpc: Round up image size during fixed image creation
vpc: Add support for Fixed Disk type
iSCSI: add configuration variables for iSCSI
qemu-io: add write -z option for bdrv_co_write_zeroes
qed: add .bdrv_co_write_zeroes() support
qed: replace is_write with flags field
block: perform zero-detection during copy-on-read
block: add .bdrv_co_write_zeroes() interface
cutils: extract buffer_is_zero() from qemu-img.c
Otherwise we end up with a dangling reference which causes qdev_free() to fail.
Reported-by: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
qdev_prop_set_* functions are always called by machine init functions
that should know what they're doing, so they abort on error. Still,
an assert(!errp) does not aid debugging. Print an error before aborting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
SPARC and PPC set properties to NULL. This can be done with an
empty string value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The conversion to memory regions broke lazy ROMD switching by forgetting
to update the rom_mode state variable.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This fixes the regression introduced by cd7a45c95e: We lost the or'ing
with the full_update flag.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add a field to XHCITransfer to correctly keep track of NAK'ed usb
packets. Retry transfers when the endpoint is kicked again. Implement
wakeup_endpoint bus op so we can kick the endpoint when needed.
With this patch applied the emulated hid devices are working correctly
when hooked up to xhci. usb-tabled without polling, yay!
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add usb bus op which is called whenever a usb endpoint becomes ready,
so the host adapter emulation can react on that event.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Devices must specify which endpoint has data to transfer now.
The plan is to use the usb_wakeup() not only for remove wakeup support,
but for "data ready" signaling in general, so we can move away from
constant polling to event driven usb device emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Maintain a list of async packets per endpoint. With the current code
the list will never receive more than a single item. I think you can
guess what the future plan is though ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the separation of the device lookup (via usb_find_device) and
packet processing we can lookup device and endpoint before setting up
the usb packet. So we can initialize USBPacket->ep early and keep it
valid for the whole lifecycle of the USBPacket. Also the devaddr and
devep fields are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a "nr" and "pid" fields to USBEndpoint so you can easily figure the
endpoint number and direction of any given endpoint.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add enum to track the status of USBPackets, use that instead of the
owner pointer to figure whenever a usb packet is currently in flight
or not. Add some more packet status sanity checks. Also rename the
USBEndpoint pointer from "owner" to "ep".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no reason to have a separate usb_generic_handle_packet function
any more, fold it into usb_handle_packet(). Also call the do_token_*
functions which handle control transfer emulation for control pipe
packets only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All drivers except usb-hub use usb_generic_handle_packet. The only
reason the usb hub has its own function is that it used to be called
with packets which are intended for downstream devices. With the new,
separate device lookup step this doesn't happen any more, so the need
for a different handle_packet callback is gone.
So we can kill the handle_packet callback and just call
usb_generic_handle_packet directly. The special hub handling in
usb_handle_packet() can go away for the same reason.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allow passing in a NULL pointer, return USB_RET_NODEV in that case.
Removes the burden to to a NULL pointer check from the callers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement the find_device callback for the usb hub. It'll loop over all
ports, calling usb_find_device for all enabled ports until it finds a
matching device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add usb_find_device(). This function will check whenever a device with
a specific address is connected to the specified port. Usually this
will just check state and address of the device hooked up to the port,
but in case of a hub it will ask the hub to check all hub ports for a
matching device.
This patch doesn't put the code into use yet, see the following patches
for details.
The master plan is to separate device lookup and packet processing.
Right now the usb code simply walks all devices, calls
usb_handle_packet() on each until one accepts the packet (by returning
something different that USB_RET_NODEV). I want to have a device lookup
first, then call usb_handle_packet() once, for the device which actually
processes the packet.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB subsystem pipes internal reset notifications through
usb_handle_packet() with a special magic PID. This indirection
is a pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway.
Replace the USB_MSG_RESET with a usb_device_reset() function
which can be called directly. Also rename the existing usb_reset()
function to usb_port_reset() to avoid confusion.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The USB subsystem pipes internal attach/detach notifications through
usb_handle_packet() with a special magic PID. This indirection is a
pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway. Remove it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the EHCI spec port ownership should revert to the EHCI controller
on device disconnect. This fixes the problem of a port getting stuck on USB 1
when using redirection and plugging in a USB 2 device after a USB 1 device
has been redirected.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The OS is allowed to make the UHCI Controller run in circles. That is
usually done to serve multiple connected USB devices in a robin-round
fashion, so the available USB bandwidth is evenly distributed between
devices.
The uhci emulation handles this in a very poor way though. When it
figures it runs in circles it stops processing unconditionally, so
it usually processes at most a single transfer desriptor per queue,
even if there are multiple transfer descriptors are queued up.
This patch makes uhci act in a more sophisticated way. It keeps track
of successful processed transfer descriptors and transfered bytes. Then
it will stop processing when there is nothing to do (no transfer
descriptor was completed the last round) or when the transfered data
reaches the usb bandwidth limit.
Result is that the usb-storage devices connected to uhci are ten times
faster, mkfs.vfat time for a 64M stick goes down from five seconds to
a half second. Reason for this is that we are now processing up to 20
transfer descriptors (with 64 bytes each) per frame instead of a single
one.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When masking IRQ lines, we should actually mask them out and not declare
them active anymore. Once we mask them in again, they are allowed to trigger
again.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_aio_cancel() can trigger bdrv_aio_flush() which makes all aio
that is currently in flight finish. So what we do is:
port reset
detect ncq in flight
cancel ncq
delete ncq sg list
at which point we have double freed the sg list. Instead, with this
patch we do:
port reset
detect ncq in flight
cancel ncq
check if we are really still in flight
delete ncq sg list
which makes things work and gets rid of the race.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The ARM devboard models (vexpress-a9, realview, versatilepb, etc)
were accidentally trying to set one of the arm_sysctl properties
after device init. This has now become a fatal error; set the property
before device init where it should be done instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Also in case of loading pre-vmstate machines, we also need to open-code
the reading of the timer expires value and instead call the post_load
callback to apply it (or not). This fixes loading of legacy states into
the KVM APIC.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To both avoid that kvm_irqchip_in_kernel always has to be paired with
kvm_enabled and that the former ends up in a function call, implement it
like the latter. This means keeping the state in a global variable and
defining kvm_irqchip_in_kernel as a preprocessor macro.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* aneesh/for-upstream:
hw/9pfs: Remove O_NOATIME flag from 9pfs open() calls in readonly mode
hw/9pfs: Update MAINTAINERS file
fsdev: Fix parameter parsing for proxy helper
hw/9pfs: Fix crash when mounting with synthfs
hw/9pfs: Preserve S_ISGID
hw/9pfs: Add new security model mapped-file.
Similarly, use the object properties also to set the default
values of the qdev properties. This requires reordering
registration and initialization.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qdev_prop_set is not needed anymore except for hacks, simplify it and
inline it.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not poke anymore in the struct when accessing qdev properties.
Instead, ask the object to set the right value.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the special free callback. Instead, register a "regular"
release method in the non-legacy property.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pointer properties (except for PROP_PTR of course) should not need a
legacy counterpart. In the future, relative paths will ensure that
QEMU will support the same syntax as now for drives etc..
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PCI addresses are set with qdev_prop_uint32. Thus we make the QOM
property accept a device and function encoded in an 8-bit integer,
instead of the magic dd.f hex string.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Also generalize the code so that we can have more enum properties
in the future.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We need the print method to put double quotes, but parsing is not special.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, a legacy property does need a special print method
but not a special parse method. In this case, we can reuse the get/set
from the static (non-legacy) property.
If neither parse nor print is needed, though, do not register the
legacy property at all. The previous patch ensures that the right
fallback will be used.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to call into ->parse and ->print manually. The
QOM legacy properties do that for us.
Furthermore, in some cases legacy and static properties have exactly
the same behavior, and we could drop the legacy properties right away.
Add an appropriate fallback to prepare for this.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Standard VGA does not use vga_draw_cursor_line_* functions.
Move the template to cirrus_vga_template.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instead of each device knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is mostly code movement although not entirely. This makes properties part
of the Object base class which means that we can now start using Object in a
meaningful way outside of qdev.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
I'm sure the intentions were good here, but there's no reason this should be in
qdev. Move it to qemu-char where it belongs.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Note that the FIXME gets fixed in series 4/4. We need to convert BusState to
QOM before we can make parent_bus a link.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This gets us closer to being able to object_new() a qdev type and have a
functioning object verses having to call qdev_create().
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Limit them to the device_add functionality. Device aliases were a hack based
on the fact that virtio was modeled the wrong way. The mechanism for aliasing
is very limited in that only one alias can exist for any device.
We have to support it for the purposes of compatibility but we only need to
support it in device_add so restrict it to that piece of code.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Use a table for aliases (Paolo)
This was done in a mostly automated fashion. I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.
The first step was a sed-based addition of the parent type to the subclass
registration functions.
The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.
Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.
We are almost fully converted to QOM after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows us to drop per-Device registration functions by allowing the
class_init functions to overload qdev methods.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now DeviceInfo is no longer used after object construction. All of the
relevant members have been moved to DeviceClass.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We can probably model USBHidDevice as a base class to get even better code
sharing but for now, just use a common function to initialize the common class
members.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Bugfix after reboot when vmmouse was enabled and another OS which uses e.g. PS/2
mouse.
Details:
When a guest activated the vmmouse followed by a reboot the vmmouse was still
enabled and the PS/2 mouse was therefore unsusable. When another guest is then
booted without vmmouse support (e.g. PS/2 mouse) the mouse is not working.
Reason is that VMMouse has priority and disables all other mouse entities
and therefore must be disabled on reset.
Testscenario:
1.) Boot e.g. OS with VMMouse support (e.g. Windows with VMMouse tools)
2.) reboot
3.) Boot e.g. OS without VMMouse support (e.g. DOS) => PS/2 mouse doesn't work
any more. Fixes that issue.
Testscenario 2 by Jan Kiszka <jan.kiszka@siemens.com>:
Confirm that this patch fixes a real issue. Setup: qemu.git,
opensuse 11.4 guest, SDL graphic, system_reset while guest is using the
vmmouse. Without the patch, the vmmouse become unusable after the
reboot. Also, the mouse stays in absolute mode even before X starts again.
Fixed by:
Disabling the vmmouse in its reset handler.
Tested-by: Andreas F=E4rber <afaerber@suse.de>
Signed-off-by: Gerhard Wiesinger <lists@wiesinger.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow to configure the MC146818 RTC via the new lost tick policy
property and replace rtc_td_hack with this mechanism.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Potentially tick-generating timer devices will gain a common property:
lock_tick_policy. It allows to encode 4 different ways how to deal with
tick events the guest did not process in time:
discard - ignore lost ticks (e.g. if the guest compensates for them
already)
delay - replay all lost ticks in a row once the guest accepts them
again
merge - if multiple ticks are lost, all of them are merged into one
which is replayed once the guest accepts it again
slew - lost ticks are gradually replayed at a higher frequency than
the original tick
Not all timer device will need to support all modes. However, all need
to accept the configuration via this common property.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This lets the RTC get adjustments from the host NTP client.
The watchdog still uses the vm_clock. The previous behavior is
available with "-rtc clock=vm".
Cc: Andreas Färber <afaerber@suse.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch implements the RX channel of GRLIB UART with a FIFO to
improve data rate.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
When 2c74c2cb4b added support for
the 'readonly' flag against 9p filesystems, it also made QEMU
add the O_NOATIME flag as a side-effect.
The O_NOATIME flag, however, may only be set by the file owner,
or a user with CAP_FOWNER capability. QEMU cannot assume that
this is the case for filesytems exported to QEMU.
eg, run QEMU as non-root, and attempt to pass the host OS
filesystem through to the guest OS with readonly enable.
The result is that the guest OS cannot open any files at
all.
If O_NOATIME is really required, it should be optionally
enabled via a separate QEMU command line flag.
* hw/9pfs/virtio-9p.c: Remove O_NOATIME
Acked-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
In passthrough security model in local fs driver, after a file creation
chown and chmod are done to set the file credentials and mode as requested
by 9p client. But if there was a request to create a file with S_ISGID
bit, doing chown on that file resets the S_ISGID bit. So first call
chown and then invoking chmod with proper mode bit retains the S_ISGID
(if present/requested)
This resulted in LTP mknod02, mknod03, mknod05, open10 test case
failures. This patch fixes this issue.
man 2 chown
When the owner or group of an executable file are changed by an unprivileged
user the S_ISUID and S_ISGID mode bits are cleared. POSIX does not specify
whether this also should happen when root does the chown(); the Linux behavior
depends on the kernel version.
Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Commit 999e12bbe8 (sysbus: apic: ioapic:
convert to QEMU Object Model) introduced two typos, one of which broke
the mac99 machine.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This converts three devices because apic and ioapic are subclasses of sysbus.
Converting subclasses independently of their base class is prohibitively hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add -pcihost to SysBus devices to resolve name conflicts,
and clarify PCI vs. Internal PCI.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
This converts two types because smbus is implemented as a subclass of i2c. It's
extremely difficult to convert these two independently.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This converts two devices at once because PIC subclasses ISA and converting
subclasses independently is extremely hard.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
These are various small stylistic changes which help make things more
consistent such that the automated conversion script can be simpler.
It's not necessary to agree or disagree with these style changes because all
of this code is going to be rewritten by the patch monkey script anyway.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since we are still dynamically creating TypeInfo, we need to chain the
class_init function in order to be able to make use of it within subclasses of
TYPE_DEVICE.
This will disappear once we register TypeInfos directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In order to introduce inheritance while still using the qdev registration
interfaces, we need to be able to use a parent other than TYPE_DEVICE. Add a
new interface that allows this.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Right now, DeviceInfo acts as the class for qdev. In order to switch to a
proper ObjectClass derivative, we need to ween all of the callers off of
interacting directly with the info pointer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is a very shallow integration. We register a TYPE_DEVICE but only use
QOM as basically a memory allocator. This will make all devices show up as
QOM objects but they will all carry the TYPE_DEVICE.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- update for new location of object.h
* pmaydell/arm-devs.for-upstream:
arm: SoC model for Calxeda Highbank
arm_boot: support board IDs more than 16 bits wide
arm: add secondary cpu boot callbacks to arm_boot.c
ahci: add support for non-PCI based controllers
Add xgmac ethernet model
A device reset does not affect the link state, only set_link does.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
A device reset does not affect the link state, only set_link does.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
By using strncasecmp, we allow for arbitrary characters after the
"on"/"off" string. Fix this by switching to strcasecmp.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Limit the return value (corresponding to the length of the buffer to be
DMAed back to the intiator) to the value in req->cmd.xfer, which is the
amount of data that the initiator expects. Eliminate now-duplicate code
that does this guarding in the functions for individual commands.
Without this, the SCRIPTS code in the emulated LSI device eventually
raises a DMA interrupt for a data overrun when an INQUIRY command whose
buflen exceeds req->cmd.xfer is processed. It's the responsibility of
the client to provide a request buffer and allocation length that are
large enough for the result of the command.
Signed-off-by: Thomas Higdon <thigdon@akamai.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There already exists a virtio_blk_handle_write trace event as well as
completion events. Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Adds support for Calxeda's Highbank SoC.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support passing a board ID value to the kernel in r1
that is more than 16 bits wide. This is needed to pass
the '-1 == invalid' value for boards which only support
device tree booting.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Create two functions, write_secondary_boot() and secondary_cpu_reset_hook(),
to allow platforms more control of how secondary CPUs are brought up. The
new functions default to NULL and aren't called unless they are populated
so there are no changes to existing platform models.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for ahci on sysbus.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds very basic support for the xgmac ethernet core. Missing things
include:
- statistics counters
- WoL support
- rx checksum offload
- chained descriptors (only linear descriptor ring)
- broadcast and multicast handling
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Remove target dependencies and compile Cirrus VGA in hwlib.
Address masking can be removed since memory API handles that now.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Instead of each target knowing or guessing the guest page size,
just pass the desired size of dirtied memory area.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* qemu-kvm/uq/master:
kvm: Activate in-kernel irqchip support
kvm: x86: Add user space part for in-kernel IOAPIC
kvm: x86: Add user space part for in-kernel i8259
kvm: x86: Add user space part for in-kernel APIC
kvm: x86: Establish IRQ0 override control
kvm: Introduce core services for in-kernel irqchip support
memory: Introduce memory_region_init_reservation
ioapic: Factor out base class for KVM reuse
ioapic: Drop post-load irr initialization
i8259: Factor out base class for KVM reuse
i8259: Completely privatize PicState
apic: Open-code timer save/restore
apic: Factor out base class for KVM reuse
apic: Introduce apic_report_irq_delivered
apic: Inject external NMI events via LINT1
apic: Stop timer on reset
kvm: Move kvmclock into hw/kvm folder
msi: Generalize msix_supported to msi_supported
hyper-v: initialize Hyper-V CPUID leaves.
hyper-v: introduce Hyper-V support infrastructure.
Conflicts:
Makefile.target
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Improve VGA selection logic, push check for device availabilty to vl.c.
Create the devices at board level unconditionally.
Remove now unused pci_try_create*() functions.
Make PCI VGA devices optional.
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Rename SysBus device from 'grackle' to 'grackle-pcihost' to resolve a
name conflict.
Also mark both devices as no_user.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
We call pci_host_config_{read,write}_common() which perform PCI config
accesses. However they don't do all limit checking the way we expect
it to.
So let's introduce a small wrapper around them, making them behave the
way we would without touching generic code.
This patch is based on a patch by David Gibson which put this logic into
the generic code.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
