According to include/qapi/error.h:
* Please don't error_setg(&error_fatal, ...), use error_report() and
* exit(), because that's more obvious.
Patch updates all instances of error_setg(&error_fatal, ...) with
error_report(...), adds the explicit exit(1) and removes redundant
return statements.
Signed-off-by: Tudor Gheorghiu <tudor.reda@gmail.com>
Suggested-by: Thomas Huth <thuth@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2587
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
(Mjt: also fold __func__ to previous line)
The error message doesn't matter much, as the "openpic" device isn't
user-creatable. But it's the last use of
QERR_PROPERTY_VALUE_OUT_OF_RANGE, which has to go. Change the message
just like the previous commit did for x86 CPUs.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Parameter @id is no longer used, drop. Return a bool to indicate
success / failure, as recommended by qapi/error.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20241010150144.986655-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
-----BEGIN PGP SIGNATURE-----
iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
=uk+a
-----END PGP SIGNATURE-----
Merge tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu into staging
pull-loongarch-20241016
# -----BEGIN PGP SIGNATURE-----
#
# iLMEAAEKAB0WIQS4/x2g0v3LLaCcbCxAov/yOSY+3wUCZw91kQAKCRBAov/yOSY+
# 3+RyA/9vpqCesEBch5mzrazO4MT2IxeN2bstF8mY+EyfEwK7Ocg+esRBsigWw56k
# y6RDyCzHg200GL9TC8bJ/nMiMJjXrahhHRPVs8AADazMzX/Ys7E7ntvUUnqqANh6
# ZX8fzNJMKW6qeUVrCIwCC7E+KjfNu32dcxbXCF4mZsehIumpUQ==
# =uk+a
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 16 Oct 2024 09:13:05 BST
# gpg: using RSA key B8FF1DA0D2FDCB2DA09C6C2C40A2FFF239263EDF
# gpg: Good signature from "Song Gao <m17746591750@163.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: B8FF 1DA0 D2FD CB2D A09C 6C2C 40A2 FFF2 3926 3EDF
* tag 'pull-loongarch-20241016' of https://gitlab.com/gaosong/qemu:
hw/loongarch/fw_cfg: Build in common_ss[]
hw/loongarch/virt: Remove unnecessary 'cpu.h' inclusion
target/loongarch: Avoid bits shift exceeding width of bool type
hw/loongarch/virt: Add FDT table support with acpi ged pm register
acpi: ged: Add macro for acpi sleep control register
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Nothing in LoongArch fw_cfg.c requires target specific definitions.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240927213254.17552-3-philmd@linaro.org>
Signed-off-by: Song Gao <gaosong@loongson.cn>
ACPI ged is used for power management on LoongArch virt platform, in
general it is parsed from acpi table. However if system boot directly from
elf kernel, no UEFI bios is provided and acpi table cannot be used also.
Here acpi ged pm register is exposed with FDT table, it is compatbile
with syscon method in FDT table, only that acpi ged pm register is accessed
with 8-bit mode, rather with 32-bit mode.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Tested-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20240918014206.2165821-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Macro definition is added for acpi sleep control register, ged emulation
driver can use the macro , also it can be used in FDT table if ged is
exposed with FDT table.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20240918014206.2165821-2-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
mips_cpu_create_with_clock() creates a vCPU. Pass it the vCPU
endianness requested by argument. Update the board call sites.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-17-philmd@linaro.org>
Have the CPS expose a 'cpu-big-endian' property so it can
set it to the vCPUs it creates.
Note, since the number of vCPUs created is dynamic, we can
not use QOM aliases.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Tested-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241010215015.44326-16-philmd@linaro.org>
Move code evaluation from preprocessor to compiler so
both if() ladders are processed. Mostly style change.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240930073450.33195-8-philmd@linaro.org>
The x86 architecture uses little endianness. Directly use
the little-endian LD/ST API.
Mechanical change using:
$ end=le; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/i386/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241004163042.85922-9-philmd@linaro.org>
Add unimplemented-device blocks to the xilinx_zynq board
corresponding to various devices documented in the TRM
and in the device tree.
See: ug585-Zynq-7000-TRM manual B.3 (Module Summary)
Signed-off-by: Chao Liu <chao.liu@yeah.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message. Removed the clearing of
the ignore_memory_transaction_failures flag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ecc.c code was used only by the PXA2xx and OMAP2 SoC devices,
which we have removed, so it is now completely unused.
Note that hw/misc/eccmemctl.c does not in fact use any of the
code frome ecc.c, so that KConfig dependency was incorrect.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-6-peter.maydell@linaro.org
The only PCMCIA subsystem was the PXA2xx SoC and the machines
using it, which have now been removed. Although in theory
we have a few machine types which have PCMCIA (e.g. kzm,
the strongarm machines, sh4's sh7750), none of those machines
implement their PCMCIA controller, and they're all old and
no longer very interesting machine types.
Rather than keeping all the PCMCIA code in-tree without any
active users of it, delete it. If we need PCMCIA in future
we can always resurrect it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241003140010.1653808-5-peter.maydell@linaro.org
The DSCM-1XXXX microdrive device model was used only by the
XScale-based Zaurus machine types. Now they have been removed, we
can delete this device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-4-peter.maydell@linaro.org
The MAX7310 GPIO controller was used only by the XScale-based Zaurus
machine types. Now they have been removed we can remove this device
model as well.
Because this device is an I2C device, in theory it could be created
by users on the command line for boards with a different I2c
controller, but we don't believe users are doing this -- it would be
impossible on the command line to connect up the GPIO inputs/outputs.
The only example a web search produces for "device max7310" is a user
trying to create this because they didn't realize that there was no
way to manipulate the GPIO lines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-3-peter.maydell@linaro.org
The MAX111X ADC device was used only by the XScale-based
Zaurus machine types. Now they have all been removed, we can
drop this device model too.
Because this device is an SSI device, in theory it could be created
by users on the command line for boards with a different SSI
controller, but we don't believe users are doing this -- it would be
impossible on the command line to connect up the GPIO inputs which
correspond to ADC inputs, or the GPIO output which is an interrupt
line. The only example a web search produces for "device max1111" or
"device max1110" is our own bug report
https://gitlab.com/qemu-project/qemu/-/issues/2228
where it's used as an example of a bogus command that causes an
assertion in an aspeed machine type that wasn't expecting anything
other than flash devices on its SMC bus.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003140010.1653808-2-peter.maydell@linaro.org
Currently the QemuLockCnt data structure and associated functions are
in the include/qemu/thread.h header. Move them to their own
qemu/lockcnt.h. The main reason for doing this is that it means we
can autogenerate the documentation comments into the docs/devel
documentation.
The copyright/author in the new header is drawn from lockcnt.c,
since the header changes were added in the same commit as
lockcnt.c; since neither thread.h nor lockcnt.c state an explicit
license, the standard default of GPL-2-or-later applies.
We include the new header (and the .c file, which was accidentally
omitted previously) in the "RCU" part of MAINTAINERS, since that
is where the lockcnt.rst documentation is categorized.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20240816132212.3602106-7-peter.maydell@linaro.org
In commit b88cfee902 we defined masks for the IBRD and FBRD
integer and fractional baud rate divider registers, to prevent the
guest from writing invalid values which could cause division-by-zero.
Unfortunately we got the mask values the wrong way around: the FBRD
register is six bits and the IBRD register is 16 bits, not
vice-versa.
You would only run into this bug if you programmed the UART to a baud
rate of less than 9600, because for 9600 baud and above the IBRD
value will fit into 6 bits, as per the table in
https://developer.arm.com/documentation/ddi0183/g/programmers-model/register-descriptions/fractional-baud-rate-register--uartfbrd
The only visible effects would be that the value read back from
the register by the guest would be truncated, and we would
print an incorrect baud rate in the debug logs.
Cc: qemu-stable@nongnu.org
Fixes: b88cfee902 ("hw/char/pl011: Avoid division-by-zero in pl011_get_baudrate()")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2610
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20241007144732.2491331-1-peter.maydell@linaro.org
The OMAP interrupt controller code used to have an omap-intc
class and an omap2-intc class, which shared common code via
the abstract class common-omap-intc. Now we have deleted
omap2-intc, we don't need the separate abstract base class;
fold int into omap-intc.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241003135323.1653230-1-peter.maydell@linaro.org
The Allwinner A10 SPI controller is added to the Allwinner A10
description, so it is available when Cubieboard is emulated.
Update the documentation for Cubieboard to indicate SPI availability.
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-3-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements Allwinner A10 SPI controller emulation.
Only master-mode functionality is implemented.
Since U-Boot and Linux SPI drivers for Allwinner A10 perform only
byte-wide CPU access (no DMA) to the transmit and receive registers of
the peripheral, the emulated controller does not implement DMA control,
and supports only byte-wide access to transmit and receive registers
(half-word and word accesses will be treated as byte accesses).
Signed-off-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20241001221349.8319-2-strahinja.p.jankovic@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expose the clock period via the QOM 'qtest-clock-period' property so it
can be used in QTests. This property is only accessible in QTests (not
via HMP).
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20241003081105.40836-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This commit creates a clock in STM32L4x5 SYSCFG and wires it up to the
corresponding clock from STM32L4x5 RCC.
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Luc Michel <luc@lmichel.fr>
Message-id: 20241003081105.40836-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: c3f21b065a ("hw/intc/arm_gicv3_cpuif: Support vLPIs")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICC_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: 28cca59c46 ("hw/intc/arm_gicv3: Add NMI handling CPU interface registers")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The result of 1 << regbit with regbit==31 has a 1 in the 32nd bit.
When cast to uint64_t (for further bitwise OR), the 32 most
significant bits will be filled with 1s. However, the documentation
states that the upper 32 bits of ICH_AP[0/1]R<n>_EL2 are reserved.
Add an explicit cast to match the documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: d2c0c6aab6 ("hw/intc/arm_gicv3: Handle icv_nmiar1_read() for icc_nmiar1_read()")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the reset and clock controller device to the stm32f405 SoC.
Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweak commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Generic RCC class for STM32 devices. It can be used for most of
the STM32 chips. Note that it only implements enable and reset
capabilities.
Signed-off-by: Roman Cardenas Rodriguez <rcardenas.rod@gmail.com>
[PMM: tweaked commit message, added MAINTAINERS lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The recently removed 'cheetah' machine was the single user
of the omap_uwire_attach() method. Remove it altogether with
the uWireSlave structure. Replace the send/receive callbacks
by Unimplemented logging.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use a common shareable type for win32 & unix, and helper functions.
This simplify the code as it avoids a lot of #ifdef'ery.
Note: if it helps review, commits could be reordered to introduce the
common type before introducing shareable memory for unix.
Suggested-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-19-marcandre.lureau@redhat.com>
Similar to what was done in commit 9462ff46 ("virtio-gpu/win32: allocate
shareable 2d resources/images") for win32, allocate resource memory with
memfd, so the associated display surface memory can be shared with a
different process.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-18-marcandre.lureau@redhat.com>
DisplaySurface may be free before the pixman image is freed, since the
image is refcounted and used by different objects, including pending
dbus messages.
Furthermore, setting the destroy function in
create_displaysurface_from() isn't appropriate, as it may not be used,
and may be overriden as in ramfb.
Set the destroy function when the shared handle is set, use the HANDLE
directly for destroy data, using a single common helper
qemu_pixman_win32_image_destroy().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-5-marcandre.lureau@redhat.com>
When SET_STREAM_FORMAT is called, we should clear the existing setup.
Factor out common function to close a stream.
Direct leak of 144 byte(s) in 3 object(s) allocated from:
#0 0x7f91d38f7350 in calloc (/lib64/libasan.so.8+0xf7350) (BuildId: a4ad7eb954b390cf00f07fa10952988a41d9fc7a)
#1 0x7f91d2ab7871 in g_malloc0 (/lib64/libglib-2.0.so.0+0x64871) (BuildId: 36b60dbd02e796145a982d0151ce37202ec05649)
#2 0x562fa2f447ee in timer_new_full /home/elmarco/src/qemu/include/qemu/timer.h:538
#3 0x562fa2f4486f in timer_new /home/elmarco/src/qemu/include/qemu/timer.h:559
#4 0x562fa2f448a9 in timer_new_ns /home/elmarco/src/qemu/include/qemu/timer.h:577
#5 0x562fa2f47955 in hda_audio_setup ../hw/audio/hda-codec.c:490
#6 0x562fa2f4897e in hda_audio_command ../hw/audio/hda-codec.c:605
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20241008125028.1177932-3-marcandre.lureau@redhat.com>
This commit adds a re-implementation of hw/char/pl011.c in Rust.
How to build:
1. Configure a QEMU build with:
--enable-system --target-list=aarch64-softmmu --enable-rust
2. Launching a VM with qemu-system-aarch64 should use the Rust version
of the pl011 device
Co-authored-by: Junjie Mao <junjie.mao@intel.com>
Co-authored-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junjie Mao <junjie.mao@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Link: https://lore.kernel.org/r/6ec1d4fb8db2a1d7ba94c73e65d9770371b7857d.1727961605.git.manos.pitsidianakis@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The S390X architecture uses big endianness. Directly use
the big-endian LD/ST API.
Mechanical change using:
$ end=be; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/s390x/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20241004163042.85922-23-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The M68K architecture uses big endianness. Directly use
the big-endian LD/ST API.
Mechanical change using:
$ end=be; \
for acc in uw w l q tul; do \
sed -i -e "s/ld${acc}_p(/ld${acc}_${end}_p(/" \
-e "s/st${acc}_p(/st${acc}_${end}_p(/" \
$(git grep -wlE '(ld|st)t?u?[wlq]_p' hw/m68k/); \
done
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20241004163042.85922-18-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
=/zo4
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* pc: Add a description for the i8042 property
* kvm: support for nested FRED
* tests/unit: fix warning when compiling test-nested-aio-poll with LTO
* kvm: refactoring of VM creation
* target/i386: expose IBPB-BRTYPE and SBPB CPUID bits to the guest
* hw/char: clean up serial
* remove virtfs-proxy-helper
* target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
* qom: improvements to object_resolve_path*()
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmb++MsUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPVnwf/cdvfxvDm22tEdlh8vHlV17HtVdcC
# Hw334M/3PDvbTmGzPBg26lzo4nFS6SLrZ8ETCeqvuJrtKzqVk9bI8ssZW5KA4ijM
# nkxguRPHO8E6U33ZSucc+Hn56+bAx4I2X80dLKXJ87OsbMffIeJ6aHGSEI1+fKVh
# pK7q53+Y3lQWuRBGhDIyKNuzqU4g+irpQwXOhux63bV3ADadmsqzExP6Gmtl8OKM
# DylPu1oK7EPZumlSiJa7Gy1xBqL4Rc4wGPNYx2RVRjp+i7W2/Y1uehm3wSBw+SXC
# a6b7SvLoYfWYS14/qCF4cBL3sJH/0f/4g8ZAhDDxi2i5kBr0/5oioDyE/A==
# =/zo4
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 03 Oct 2024 21:04:27 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
qom: update object_resolve_path*() documentation
qom: set *ambiguous on all paths
qom: rename object_resolve_path_type() "ambiguousp"
target/i386/kvm: Report which action failed in kvm_arch_put/get_registers
kvm: Allow kvm_arch_get/put_registers to accept Error**
accel/kvm: refactor dirty ring setup
minikconf: print error entirely on stderr
9p: remove 'proxy' filesystem backend driver
hw/char: Extract serial-mm
hw/char/serial.h: Extract serial-isa.h
hw: Remove unused inclusion of hw/char/serial.h
target/i386: Expose IBPB-BRTYPE and SBPB CPUID bits to the guest
kvm: refactor core virtual machine creation into its own function
kvm/i386: replace identity_base variable with a constant
kvm/i386: refactor kvm_arch_init and split it into smaller functions
kvm: replace fprintf with error_report()/printf() in kvm_init()
kvm/i386: fix return values of is_host_cpu_intel()
kvm/i386: make kvm_filter_msr() and related definitions private to kvm module
hw/i386/pc: Add a description for the i8042 property
tests/unit: remove block layer code from test-nested-aio-poll
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# hw/arm/Kconfig
# hw/arm/pxa2xx.c
Enable PCI support for the ARM Xen PVH machine.
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Expose handle_bufioreq in xen_register_ioreq().
This is to allow machines to enable or disable buffered ioreqs.
No functional change since all callers still set it to
HVM_IOREQSRV_BUFIOREQ_ATOMIC.
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
It has been deprecated since 8.1; remove it and suggest using the 'local' file
system backend driver instead or virtiofsd.
Acked-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
hw/char/serial currently contains the implementation of both TYPE_SERIAL and
TYPE_SERIAL_MM. According to serial_class_init(), TYPE_SERIAL is an internal
class while TYPE_SERIAL_MM is used by numerous machine types directly. Let's
move the latter into its own module which makes the dependencies more obvious
and the code more tidy.
The includes and the dependencies have been converted mechanically except in the
hw/char directories which were updated manually. The result was compile-tested.
Now, only hw/char makes direct use of TYPE_SERIAL:
# grep -r -e "select SERIAL" | grep -v SERIAL_
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
hw/char/Kconfig: select SERIAL
# grep -r -e "/serial\\.h"
include/hw/char/serial-mm.h:#include "hw/char/serial.h"
hw/char/serial-pci-multi.c:#include "hw/char/serial.h"
hw/char/serial.c:#include "hw/char/serial.h"
hw/char/serial-isa.c:#include "hw/char/serial.h"
hw/char/serial-pci.c:#include "hw/char/serial.h"
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-4-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The includes where updated based on compile errors. Now, the inclusion of the
header roughly matches Kconfig dependencies:
# grep -r -e "select SERIAL_ISA"
hw/ppc/Kconfig: select SERIAL_ISA
hw/isa/Kconfig: select SERIAL_ISA
hw/sparc64/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA
hw/i386/Kconfig: select SERIAL_ISA # for serial_hds_isa_init()
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Link: https://lore.kernel.org/r/20240905073832.16222-3-shentey@gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
