For historical reasons it was bit 3. Once there, create a constant to
know the number of clients.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Document it
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
So remove the flag argument and do it directly. After this change,
there is nothing else using cpu_physical_memory_set_dirty_flags() so
remove it.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
So cpu_physical_memory_get_dirty_flags is not needed anymore
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
So return void.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Move index and size fields from int to long. We need that for
migration. long is 64 bits on sane architectures, and 32bits should
be enough on all the 32bits architectures.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
This will allow unit tests to be written for VMState code without
pulling dependencies from the savevm code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The VMState code will be moved to vmstate.c and it uses some of the
QEMU_VM_* constants, so move it to a header.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The QEMUFile code will be moved to qemu-file.c. This will require making
the following functions non-static because they are used by the savevm.c
code:
* qemu_peek_byte()
* qemu_peek_buffer()
* qemu_file_skip()
* qemu_file_set_error()
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The migration thread appears to want to allow writeout to occur at full
speed rather than being rate limited during completion of state saving,
but sets the limit to INT_MAX when xfer_limit is INT64_MAX. This causes
problems if there's more than 2GB of state left to save at this point. It
probably ought to just be INT64_MAX instead.
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce MIG_STATE_CANCELLING state to avoid starting a new migration task while the previous one still exist.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Zhang Haoyu <haoyu.zhang@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Avoid a bogus COMPLETED->CANCELLED transition.
There is a period of time from the timing of setting COMPLETED state to that of migration thread exits, so during which it's problematic in COMPLETED->CANCELLED transition.
Signed-off-by: Zeng Junliang <zengjunliang@huawei.com>
Signed-off-by: Zhang Haoyu <haoyu.zhang@huawei.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
* pass command key to guest when VM has mousegrab
* add .qcow2 to extension list for image load dialog
* fix bugs in code for starting QEMU via image load dialog
* fix resize/redraw interaction
* draw window black if guest hasn't sent anything to screen
* minor style/typo fixes
* add myself as cocoa co-maintainer
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABCAAGBQJS0xsgAAoJEDwlJe0UNgzeADIP/3qewnn2gj9HSXCuj2w8f38n
ed7M0QRJU8btsiRFWjqUNsCpRl18O8Lm+S9DlsjNbyaUGpgRnF5KfYyfU6lPeg5S
IzkYcKu/pKj1vFol4BamD/4AyohJZh9yHu5mvKyB7QCMIj1ulnNehwlTKL93tX92
Nb5E9nshm9ypei6f/HRA+NU+dgZjyEUZ/20/uzw+GokdFjosEZ/cgCWGI1iKPgda
ebfJW9reYpuWg2C7lp6PGJ4p3lLwPO3CYBqsDVertLvVT4RXduVtPcyuQWaRuIWt
v4tu5bevKkmKI04bQYUS4dcURwPfPPufQ9nUjDLx67CYKTXgEJFoOkSzJOG8bGyo
3uyznDEk+cbe09QM6Vnkmyb8pHWR2bWw+p6Iwd1JTZmLLb2eOJEUcfdUkjqKYw97
uAzo2VomWT80wU2mnjjZdea8Ub+PrLeoN4ifkYlbss+3bWA2imhQoP/4/l34Sixh
9Hw1xOE6nPvrFX0Bv8HROzlIkS5zEyzwxTiuJ3qmm6t+97Kf1YLg0Fyxz8rk4sJ1
cz0cBbDLj9eInl6vxt7rufphBaF3qSwOt7tRHaowu1ikqJwYsxrZQ2c4bs8phg3T
rCrsfUOz3QD8XKC0J+cIa6Zlj+bhP6tesbqmwficzT/YoRs0bqvYQ+NBjH17f3Dc
WIG0GerJahvnP/vXsvEw
=69oG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-cocoa-20140112' into staging
cocoa queue:
* pass command key to guest when VM has mousegrab
* add .qcow2 to extension list for image load dialog
* fix bugs in code for starting QEMU via image load dialog
* fix resize/redraw interaction
* draw window black if guest hasn't sent anything to screen
* minor style/typo fixes
* add myself as cocoa co-maintainer
# gpg: Signature made Sun 12 Jan 2014 02:45:52 PM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
* pmaydell/tags/pull-cocoa-20140112:
MAINTAINERS: add myself as cocoa UI co-maintainer
ui/cocoa: Remove stray tabs
ui/cocoa: Draw black rectangle if we have no data yet
ui/cocoa: Redraw at correct size when switching surface
ui/cocoa: Fix code for starting QEMU via image file load dialog
ui/cocoa: Add ".qcow2" to extension list for image load dialog
ui/cocoa: Send warning message to stderr, not stdout
ui/cocoa: Correct typos in comments and variable names
ui/cocoa: Pass command key through to guest when VM has mousegrab
Message-id: 1389567158-31066-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Add myself to the maintainers list for the cocoa UI; status
remains "Odd Fixes".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Message-id: 1387207075-10280-1-git-send-email-peter.maydell@linaro.org
The ui/cocoa.m file has just three lines with hardcoded tabs; fix them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1387886052-27067-1-git-send-email-peter.maydell@linaro.org
If our redraw method is called before we have any data from the guest,
then draw a black rectangle rather than leaving the window empty.
This mostly only matters when the guest machine has no framebuffer
device, but it is more in line with the behaviour of other QEMU UIs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-3-git-send-email-peter.maydell@linaro.org
If the surface switch involved a resize, we were doing the redraw
at the old size rather than the new, because the update of
screen.width and screen.height was being done after the setFrame
method calls which triggered a redraw. Normally this isn't very
noticeable because typically after the guest triggers the window
resize it also draws something to it, which will in turn cause
us to redraw. However, the combination of a guest which never
draws to the display and a command line setting of a screen size
larger than the default can reveal odd effects.
Move most of the handling of resizes to the top of the method,
and guard it with a check that the surface size actually changed,
to avoid unnecessary operations (including some user visible ones
like "recenter the window on the screen") if the surface is the
same size as the old one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-2-git-send-email-peter.maydell@linaro.org
Fix a number of bugs in the code for starting QEMU via the image
file load dialog:
* use the actual argv[0] rather than "qemu": this avoids failures to
find BIOS image files caused by not looking in the correct directory
relative to the executable path
* allocate a large enough argv array to NULL terminate it
* use g_strdup(X) rather than g_strdup_printf("%s", X) or
g_strdup_printf(X)
* disable the printing of the simulated command line argument
(which is presumably intended for debug only)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-6-git-send-email-peter.maydell@linaro.org
Add ".qcow2" to the list of file extensions which are accepted
by the initial disk image load dialog which is displayed if the
user runs QEMU without any command line arguments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-5-git-send-email-peter.maydell@linaro.org
Fix various non-user-visible typos in comments and variable names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1386543546-31919-3-git-send-email-peter.maydell@linaro.org
The guest might want to be able to use the command key for its won
purposes (as command if it is MacOS X, or for the Windows key if
it is a PC guest, for instance). In line with other UI frontends,
pass it through if the guest has mousegrab, and only use it for UI
menu accelerators if not grabbed.
Thanks to John Arbuckle for reporting this problem, helping
us work through what the best solution would be and providing
a patch which was the initial inspiration for this one.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-2-git-send-email-peter.maydell@linaro.org
* bonzini/scsi-next:
scsi-disk: add UNMAP limits to block limits VPD page
block/iscsi: use a bh to schedule co reentrance
Message-id: 1387720926-11421-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* stefanha/block:
commit: Remove unused check
qemu-iotests: Update test cases for commit active
commit: Support commit active layer
block: Add commit_active_start()
mirror: Move base to MirrorBlockJob
mirror: Don't close target
qemu-iotests: drop duplicate virtio-blk initialization failure
vmdk: Allow vmdk_create to work with protocol
vmdk: Check VMFS extent line field number
docs: updated qemu-img man page and qemu-doc to reflect VHDX support.
block: vhdx - improve error message, and .bdrv_check implementation
block/iscsi: Fix compilation for libiscsi 1.4.0 (API change)
qapi-schema: fix QEMU 1.8 references
dataplane: replace hostmem with memory_region_find
dataplane: change vring API to use VirtQueueElement
vring: factor common code for error exits
vring: create a common function to parse descriptors
sheepdog: fix dynamic grow for running qcow2 format
Message-id: 1387554416-5837-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)
iQEcBAABAgAGBQJSuF+2AAoJECgfDbjSjVRpTz0IAJhNCC8L2GVt+pm1RAt6lbqZ
u9bCrqfThDORN2mUTEuLu4ZpZC0DYc7d0Jjr5NPesC5G/Afzi5/to6+l7nNZneU3
OdBPglXCCfU/cRaLu7JG2akpha0GVU0tsSCoWIYa6mwlWA4/DXVMgeKg/bh/EgfM
B1w4fE2RgRM9bEqWmX4+tZw8dgk7uVJhu95HCDnb5eikaKlFzwuOlvexrDV3KbPc
bkJe35zbGrKOws93tiSeoqcDx2dcYSzecPoJ0jiCY0KXJ17PBWAvuLTtYqkwwe9J
2FEnTslQJ3Rc8jTFiOPWx2pGaejG4y7Tnk6uuzW6fbbSLOQDPJy3KgmutJFMt1A=
=ShCj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
acpi,pci,pc,fedora,virtio fixes and enhancements
This includes some Preparatory patches for cpu hotplug for q25 and memory
hotplug by Igor, tests and memory mapping change
by Laszlo and pci reset cleanup by Paolo.
There are also some fixes for fedora and virtio:
included here since they are test blockers for me.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 23 Dec 2013 08:07:18 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
* mst/tags/for_anthony:
target-arm: fix build with gcc 4.8.2
virtio: add back call to virtio_bus_device_unplugged
piix: fix 32bit pci hole
qdev: switch reset to post-order
qdev: allow both pre- and post-order vists in qdev walking functions
pci: clean up resetting of IRQs
pci: do not export pci_bus_reset
ACPI/DSDT-CPU: cleanup bogus comment
ACPI: Q35 DSDT: fix CPU hotplug GPE0.2 handler
acpi: ich9: allow guest to clear SCI rised by GPE
acpi: factor out common pm_update_sci() into acpi core
acpi: piix4: remove not needed GPE0 mask
i440fx-test: verify firmware under 4G and 1M, both -bios and -pflash
i440fx-test: generate temporary firmware blob
i440fx-test: give each GTest case its own qtest
i440fx-test: qtest_start() should be paired with qtest_end()
hw/i386/pc_sysfw: support two flash drives
pc_piix: document gigabyte_align
piix: gigabyte alignment for ram
Message-id: 1387815007-1272-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* further A64 decoder patches, including enabling the aarch64-linux-user
target; this includes full floating point support. Neon is not yet
supported.
* cadence UART model fixes.
* some minor bug fixes and cleanups.
* all the softfloat fixes required by the new A64 instructions;
several of these will also be used by PPC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=hNuX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20140107' into staging
target-arm queue:
* further A64 decoder patches, including enabling the aarch64-linux-user
target; this includes full floating point support. Neon is not yet
supported.
* cadence UART model fixes.
* some minor bug fixes and cleanups.
* all the softfloat fixes required by the new A64 instructions;
several of these will also be used by PPC.
* pmaydell/tags/pull-target-arm-20140107: (61 commits)
target-arm: A64: Add support for FCVT between half, single and double
target-arm: A64: Add 1-source 32-to-32 and 64-to-64 FP instructions
target-arm: A64: Add floating-point<->integer conversion instructions
target-arm: A64: Add floating-point<->fixed-point instructions
target-arm: A64: Add extra VFP fixed point conversion helpers
target-arm: Ignore most exceptions from scalbn when doing fixpoint conversion
target-arm: Rename A32 VFP conversion helpers
target-arm: Prepare VFP_CONV_FIX helpers for A64 uses
softfloat: Add support for ties-away rounding
softfloat: Refactor code handling various rounding modes
softfloat: Add float16 <=> float64 conversion functions
softfloat: Factor out RoundAndPackFloat16 and NormalizeFloat16Subnormal
softfloat: Provide complete set of accessors for fp state
softfloat: Fix float64_to_uint32_round_to_zero
softfloat: Fix float64_to_uint32
softfloat: Fix float64_to_uint64_round_to_zero
softfloat: Add float32_to_uint64()
softfloat: Fix factor 2 error for scalbn on denormal inputs
softfloat: Only raise Invalid when conversions to int are out of range
softfloat: Fix float64_to_uint64
...
Conflicts:
target-arm/cpu.h
aliguori: resolved trivial conflict
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* riku/linux-user-for-upstream:
linux-user: Remove regs parameter of load_elf_binary and load_flt_binary
linux-user: Support the accept4 socketcall
Message-id: 1389364137-23287-1-git-send-email-riku.voipio@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The regs parameter is not used anywhere, so remove it.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=WrhM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into staging
QOM infrastructure fixes and device conversions
* QOM interface fixes and unit test
* Device no_user sanitization and documentation
* Device error reporting improvement
* Conversion of APIC, ICC, IOAPIC to QOM realization model
# gpg: Signature made Tue 24 Dec 2013 09:04:05 AM PST using RSA key ID 3E7E013F
# gpg: Good signature from "Andreas Färber <afaerber@suse.de>"
# gpg: aka "Andreas Färber <afaerber@suse.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 174F 0347 1BCC 221A 6175 6F96 FA2E D12D 3E7E 013F
* afaerber/tags/qom-devices-for-anthony: (24 commits)
qdev-monitor: Improve error message for -device nonexistant
ioapic: QOM'ify ioapic
ioapic: Cleanup for QOM'ification
icc_bus: QOM'ify ICC
apic: QOM'ify APIC
apic: Cleanup for QOM'ification
qdev: Drop misleading qbus_free() function
qom: Detect bad reentrance during object_class_foreach()
tests: Test QOM interface casting
qom: Do not register interface "types" in the type table and fix names
qom: Split out object and class caches
qdev: Document that pointer properties kill device_add
hw: cannot_instantiate_with_device_add_yet due to pointer props
qdev-monitor: Avoid device_add crashing on non-device driver name
qdev: Do not let the user try to device_add when it cannot work
isa: Clean up use of cannot_instantiate_with_device_add_yet
vt82c686: Clean up use of cannot_instantiate_with_device_add_yet
piix3 piix4: Clean up use of cannot_instantiate_with_device_add_yet
ich9: Document why cannot_instantiate_with_device_add_yet
pci-host: Consistently set cannot_instantiate_with_device_add_yet
...
* mjt/trivial-patches:
acpi unit-test: Remove temporary disk after test
mainstone: Fix duplicate array values for key 'space'
pxa27x: Add 'const' attribute to keyboard maps
pxa27x: Reduce size of keyboard matrix mapping
doc: Mention chardev:id in available devices for -serial
configure: Python tests must be done before help message
configure: Rewrite code for help message
fix -boot strict regressed in commit 6ef4716
vl: make boot_strict variable static (not used outside vl.c)
x86: only allow real mode to access 32bit without LMA
linux-user: Use macro TARGET_NSIG_WORDS where possible
exynos4210: Use macro ARRAY_SIZE where possible
ui/cocoa: Use macro ARRAY_SIZE where possible
misc: Use macro ARRAY_SIZE where possible
openrisc: Fix spelling in comment (transaltion -> translation)
hw/arm/highbank: Simplify code (memory region in device state)
Message-id: 1388182050-10270-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* further A64 decoder patches, including enabling the aarch64-linux-user
target; this includes full floating point support. Neon is not yet
supported.
* cadence UART model fixes.
* some minor bug fixes and cleanups.
* all the softfloat fixes required by the new A64 instructions;
several of these will also be used by PPC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=nyX0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'pmaydell/tags/pull-target-arm-20140108' into staging
target-arm queue:
* further A64 decoder patches, including enabling the aarch64-linux-user
target; this includes full floating point support. Neon is not yet
supported.
* cadence UART model fixes.
* some minor bug fixes and cleanups.
* all the softfloat fixes required by the new A64 instructions;
several of these will also be used by PPC.
# gpg: Signature made Wed 08 Jan 2014 11:25:12 AM PST using RSA key ID 14360CDE
# gpg: Can't check signature: public key not found
* pmaydell/tags/pull-target-arm-20140108: (76 commits)
target-arm: A64: Add support for FCVT between half, single and double
target-arm: A64: Add 1-source 32-to-32 and 64-to-64 FP instructions
target-arm: A64: Add floating-point<->integer conversion instructions
target-arm: A64: Add floating-point<->fixed-point instructions
target-arm: A64: Add extra VFP fixed point conversion helpers
target-arm: Ignore most exceptions from scalbn when doing fixpoint conversion
target-arm: Rename A32 VFP conversion helpers
target-arm: Prepare VFP_CONV_FIX helpers for A64 uses
softfloat: Add support for ties-away rounding
softfloat: Refactor code handling various rounding modes
softfloat: Add float16 <=> float64 conversion functions
softfloat: Factor out RoundAndPackFloat16 and NormalizeFloat16Subnormal
softfloat: Provide complete set of accessors for fp state
softfloat: Fix float64_to_uint32_round_to_zero
softfloat: Fix float64_to_uint32
softfloat: Fix float64_to_uint64_round_to_zero
softfloat: Add float32_to_uint64()
softfloat: Fix factor 2 error for scalbn on denormal inputs
softfloat: Only raise Invalid when conversions to int are out of range
softfloat: Fix float64_to_uint64
...
Message-id: 1389209439-25448-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Add support for FCVT between half, single and double precision.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
