This is needed for usb-redir to work properly with the xhci emulation.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This gives us support for 64 bit ids which is needed for using XHCI with
the new hcd generated ids.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Babble is the appropriate error in this case (rather then signalling a stall).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a preparation patch for completely getting rid of the async-packet
struct in usb-redir, instead relying on the (new) per ep queues in the
qemu usb core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The shadow copy only serves as an extra check (besides the packet-id) to
ensure the packet we get back is a reply to the packet we think it is.
This check has never triggered in all the time usb-redir is in use now,
and since the verified data in the returned packet-header is not used
otherwise, removing the check does not open any possibilities for the
usbredirhost to confuse us.
This is a preparation patch for completely getting rid of the async-packet
struct in usb-redir, instead relying on the (new) per ep queues in the
qemu usb core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a preparation patch for completely getting rid of the async-packet
struct in usb-redir, instead relying on the (new) per ep queues in the
qemu usb core.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There is no need for this, and doing so means that a backend trying to
write immediately after an open event will see qemu_chr_be_can_write
returning 0, which not all backends handle well as there is no wakeup
mechanism to detect when the frontend does become writable.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USB_RET_NAK is not a valid response for async handled packets (and will
trigger an assert as such).
Also drop the warning when receiving a status of cancelled for packets not
cancelled by qemu itself, this can happen when a device gets unredirected
by the usbredir-host while transfers are pending.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Since my previous comment said "Should never happen", I tried changing the
next line to an assert(0), which did not go well, which as the new comments
explains is logical if you think about it for a moment.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
USB_RET_PROCERR can be triggered by the guest (by for example requesting more
then BUFFSIZE bytes), so don't assert on it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently each time we try to execute a NAK-ed packet we redo
ehci_init_transfer, and usb_packet_map, re-allocing (without freeing) the
sg list every time.
This patch fixes this, it does this by introducing another async state, so
that we also properly cleanup a NAK-ed packet on cancel.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
make qemu_queue_{cancel,reset} return the number of packets released,
so the caller can figure whenever there have been active packets even
though there shouldn't have been any. Add tracepoint to log this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reported packets which have completed before being cancelled as such to the
host. Note that the new code path this patch adds is untested since it I've
been unable to actually trigger the race which needs this code path.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-combine the qh check with the check for devaddr changes
-also ensure that p gets set to NULL when the queue gets cancelled on
devaddr change, which was not done properly before this patch
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This reverts commit 9bc3a3a216, which got
added to fix an issue where the real, underlying cause was not stopping
the ep queue on an error.
Now that the underlying cause is fixed by the "usb: Halt ep queue and
cancel pending packets on a packet error" patch, the "don't flush" fix
is no longer needed.
Not only is it not needed, it causes us to see cancellations (unlinks)
done by the Linux EHCI driver too late, which in combination with the new
usb-core packet-id generation where qtd addresses are used as ids, causes
duplicate ids for in flight packets.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This can happen with usb-redir live-migration when the packet gets re-queued
after the migration and the original queuing from the migration source side
has already finished.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This way the hcd can re-use the same packet to retry without needing
to re-init it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If an (emulated) usb-device tries to write more data to a packet then
its iov len, this will trigger an assert in usb_packet_copy(), and if
a driver somehow circumvents that check and writes more data to the
iov then there is space, we have a much bigger problem then not correctly
reporting babble to the guest.
In practice babble will only happen with (real) redirected devices, and there
both the usb-host os and the qemu usb-device code already check for it.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch makes rtc_set_time and rtc_set_cmos work without reading
s->current_tm. In the case of rtc_set_time I introduce a new
function that retrieves the time and stores into a given struct tm
(not hard-coded to s->current_tm). In the case of rtc_set_cmos, the
current time is similarly taken from a struct tm rather than
s->current_tm.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch limits further the usage of a periodic timer. It computes the
time of the next alarm, and uses it to skip all intermediate occurrences
of the timer.
Cc: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The first update cycle begins one-half seconds after divider
reset is removed. This feature is useful for testing.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Calculate guest RTC based on the time of the last update, instead of
using timers. The formula is
(base_rtc + guest_time_now - guest_time_last_update + offset)
Base_rtc is the RTC value when the RTC was last updated.
Guest_time_now is the guest time when the access happens.
Guest_time_last_update was the guest time when the RTC was last updated.
Offset is used when divider reset happens or the set bit is toggled.
The timer is kept in order to signal interrupts, but it only needs to
run when either UF or AF is cleared. When the bits are both set, the
timer does not run.
UIP is now synthesized when reading register A. If the timer is not set,
or if there is more than one second before it (as is the case at the
end of this series), the leading edge of UIP is computed and the rising
edge occurs 220us later. If the update timer occurs within one second,
however, the rising edge of the AF and UF bits should coincide withe
the falling edge of UIP. We do not know exactly when this will happen
because there could be delays in the servicing of the timer. Hence, in
this case reading register A only computes for the rising edge of UIP,
and latches the bit until the timer is fired and clears it.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If an interrupt flag is already set when the interrupt becomes enabled,
raise an interrupt immediately, and vice versa if interrupts become
disabled.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Changing the DM (binary/BCD) and 24/12 control bit doesn't affect the internal
registers. It only indicates what format is used for those registers.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/uq/master:
kvm: i386: Add classic PCI device assignment
kvm: i386: Add services required for PCI device assignment
kvm: Introduce kvm_has_intx_set_mask
kvm: Introduce kvm_irqchip_update_msi_route
kvm: Clean up irqfd API
qemu: Use valgrind annotations to mark kvm guest memory as defined
* mst/tags/for_anthony:
vhost: Pass device path to vhost_dev_init()
monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param
pcie_aer: clear cmask for Advanced Error Interrupt Message Number
pcie: drop version_id field for live migration
qemu: add .exrc
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu:
Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP
qxl: Add set_client_capabilities() interface to QXLInterface
spice: make number of surfaces runtime-configurable.
configure: print spice-protocol and spice-server versions
qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
qxl: disallow unknown revisions
qxl/update_area_io: guest_bug on invalid parameters
spice: increase the verbosity of spice section in "qemu --help"
spice: adding seamless-migration option to the command line
spice: add 'migrated' flag to spice info
spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED
spice: notify on vm state change only via spice_server_vm_start/stop
spice: notify spice server on vm start/stop
spice: abort on invalid streaming cmdline params
Report from smatch:
hw/wm8750.c:369 wm8750_tx(12) error: buffer overflow 's->i2c_data' 2 <= 2
It looks like the preprocessor statements were simply misplaced.
Replace also __FUNCTION__ by __func__ to please checkpatch.pl.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds PCI device assignment for i386 targets using the classic KVM
interfaces. This version is 100% identical to what is being maintained
in qemu-kvm for several years and is supported by libvirt as well. It is
expected to remain relevant for another couple of years until kernels
without full-features and performance-wise equivalent VFIO support are
obsolete.
A refactoring to-do that should be done in-tree is to model MSI and
MSI-X support via the generic PCI layer, similar to what VFIO is already
doing for MSI-X. This should improve the correctness and clean up the
code from duplicate logic.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
No need to expose the fd-based interface, everyone will already be fine
with the more handy EventNotifier variant. Rename the latter to clarify
that we are still talking about irqfds here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The old arithmetic assumed 32 physical address bits which is no longer
true for ARM since 3cc0cd61f4.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The lan9118 emulation tries to compute the multicast index by calling
directly the crc32() function from zlib, but fails to get the correct
result.
Use the common compute_mcast_idx() function instead, which gives the
correct result. This fixes IPv6 support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Find a hopefully proper patch attached. Take it or leave it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Henning Schild <henning@hennsch.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The path to /dev/vhost-net is currently hardcoded in vhost_dev_init().
This needs to be changed so that /dev/vhost-scsi can be used. Pass in
the device path instead of hardcoding it.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Advanced Error Interrupt Message Number (bits 31:27 of the Root
Error Status Register) is updated when the number of msi messages assigned to a
device changes. Migration of windows 7 on q35 chipset failed because the check
in get_pci_config_device() fails due to cmask being set on these bits. Its valid
to update these bits and we must restore this state across migration.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
While testing q35 live migration, I found that the migration would abort with
the following error: "Unknown savevm section type 76".
The error is due to this check failing in 'vmstate_load_state()':
while(field->name) {
if ((field->field_exists &&
field->field_exists(opaque, version_id)) ||
(!field->field_exists &&
field->version_id <= version_id)) {
The VMSTATE_PCIE_DEVICE() currently has a 'version_id' set to 2. However,
'version_id' in the above check is 1. And thus we fail to load the pcie device
field. Further the code returns to 'qemu_loadvm_state()' which produces the
error that I saw.
I'm proposing to fix this by simply dropping the 'version_id' field from
VMSTATE_PCIE_DEVICE(). VMSTATE_PCI_DEVICE() defines no such field and further
the vmstate_pcie_device that VMSTATE_PCI_DEVICE() refers to is already
versioned. Thus, any versioning issues could be detected at the vmsd level.
Taking a step back, I think that the 'field->version_id' should be compared
against a saved version number for the field not the 'version_id'. Futhermore,
once vmstate_load_state() is called recursively on another vmsd, the check of:
if (version_id > vmsd->version_id) {
return -EINVAL;
}
Will never fail since version_id is always equal to vmsd->version_id. So I'm
wondering why we aren't storing the vmsd version id of the source in the
migration stream?
This patch also renames the 'name' field of vmstate_pcie_device from:
PCIDevice -> PCIEDevice to differentiate it from vmstate_pci_device.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix the spelling of 'palette' used in various local variables,
structure members and comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Avoids confusion with the global ppm_save() defined in hw/vga.c.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
All devices that register a screen dump callback via
graphic_console_init() are updated.
The new argument is not used in this commit. Error handling will
be added to each device individually later.
This change is a preparation to convert the screendump command
to the QAPI.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We require spice >= 0.8 now, so this flag is always present.
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This new interface lets spice server inform the guest whether
(a) a client is connected
(b) what capabilities the client has
There is a fixed number (464) of bits reserved for capabilities, and
when the capabilities bits change, the QXL_INTERRUPT_CLIENT interrupt
is generated.
Signed-off-by: Soren Sandmann <ssp@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Revision bumped to 4 for new IO support, enabled for spice-server >=
0.11.1. New io enabled if revision is 4. Revision can be set to 4.
[ kraxel: 3 continues to be the default revision. Once we have a new
stable spice-server release and the qemu patches to enable
the new bits merged we'll go flip the switch and make rev4
the default ]
This io calls the corresponding new spice api
spice_qxl_monitors_config_async to let spice-server read a new guest set
monitors config and notify the client.
On migration reissue spice_qxl_monitors_config_async.
RHBZ: 770842
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
fixup
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Kick next scsi transfer from request release callback instead of command
completion callback, otherwise we might get stuck in case scsi_req_unref()
doesn't release the request instantly due to someone else holding a
reference too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
One of the recent changes (likely the addition of queuing support) has broken
interrupt endpoints, this patch fixes this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ehci_state_executing does not need to check for p->usb_status == USB_RET_ASYNC
or USB_RET_PROCERR, since ehci_execute_complete already does a similar check
and will trigger an assert if either value is encountered.
USB_RET_ASYNC should never be the packet status when execute_complete runs
for obvious reasons, and USB_RET_PROCERR is only used by ehci_state_execute /
ehci_execute not by ehci_state_executing / ehci_execute_complete.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ehci_qh_do_overlay() already calls ehci_flush_qh() before it returns, calling
it twice is useless.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
After the "ehci: Print a warning when a queue unexpectedly contains packets
on cancel" commit. Under certain reproducable conditions I was getting the
following message: "EHCI: Warning queue not empty on queue reset".
After aprox. 8 hours of debugging I've finally found the cause. The Linux EHCI
driver has an IAAD watchdog, to work around certain EHCI hardware sometimes
not acknowledging the doorbell at all. This watchdog has a timeout of 10 ms,
which is less then the time between 2 runs through the async schedule when
async_stepdown is at its highest value.
Thus the watchdog can trigger, after which Linux clears the IAAD bit and
re-uses the QH. IOW we were not properly detecting the unlink of the qh, due
to us missing (ignoring for more then 10 ms) the IAAD command, which triggered
the warning.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This patch adds IDs to usb packets. Those IDs are (a) supposed to be
unique for the lifecycle of a packet (from packet setup until the packet
is either completed or canceled) and (b) stable across migration.
uhci, ohci, ehci and xhci use the guest physical address of the transfer
descriptor for this.
musb needs a different approach because there is no transfer descriptor.
But musb also doesn't support pipelining, so we have never more than one
packet per endpoint in flight. So we go create an ID based on endpoint
and device address.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For controllers which queue up more then 1 packet at a time, we must halt the
ep queue, and inside the controller code cancel all pending packets on an
error.
There are multiple reasons for this:
1) Guests expect the controllers to halt ep queues on error, so that they
get the opportunity to cancel transfers which the scheduled after the failing
one, before processing continues
2) Not cancelling queued up packets after a failed transfer also messes up
the controller state machine, in the case of EHCI causing the following
assert to trigger: "assert(p->qtdaddr == q->qtdaddr)" at hcd-ehci.c:2075
3) For bulk endpoints with pipelining enabled (redirection to a real USB
device), we must cancel all the transfers after this a failed one so that:
a) If they've completed already, they are not processed further causing more
stalls to be reported, originating from the same failed transfer
b) If still in flight, they are cancelled before the guest does
a clear stall, otherwise the guest and device can loose sync!
Note this patch only touches the ehci and uhci controller changes, since AFAIK
no other controllers actually queue up multiple transfer. If I'm wrong on this
other controllers need to be updated too!
Also note that this patch was heavily tested with the ehci code, where I had
a reproducer for a device causing a transfer to fail. The uhci code is not
tested with actually failing transfers and could do with a thorough review!
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without the patch bus properties are are not in line with the other
properties:
[ ... ]
dev: fw_cfg, id ""
ctl_iobase = 0x510
data_iobase = 0x511
irq 0
mmio ffffffffffffffff/0000000000000002
mmio ffffffffffffffff/0000000000000001
[ ... ]
With the patch applied everything is lined up properly:
[ ... ]
dev: fw_cfg, id ""
ctl_iobase = 0x510
data_iobase = 0x511
irq 0
mmio ffffffffffffffff/0000000000000002
mmio ffffffffffffffff/0000000000000001
[ ... ]
Needed to make the autotest qtree parser happy.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The facility to use/unuse vectors dynamically is helpful
for virtio but little else: everyone just seems to use
vectors in their init function.
Avoid clearing msix vector use info on reset and load.
For virtio, clear it explicitly.
This should fix regressions reported with ivshmem - though
I didn't test this, I verified that virtio keeps
working like it did.
Tested-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The bug causes Windows + OVMF hang after reboot since OVMF
checks PMREGMISC to see if IO space is enabled and skip
configuration if it is.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
setup_ioeventfds() is unnecessary and actually causes a segfault when used
ioeventfd=on is used on the command-line. Since ioeventfds are handled within
the memory API, it can be removed.
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add the missing .class_size definition to the arm_gic_info TypeInfo.
This fixes the memory corruption and possible segfault that otherwise
results when the class struct is allocated at too small a size and
the class init function writes off the end of it.
Reported-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 0384783 (scsi-block: remove properties that are not relevant for
passthrough, 2012-07-09) removed one property that should have been
left there, "bootindex".
It also did not touch scsi-generic, while it should have.
Fix both problems.
Reported-by: Alexandre DERUMIER <aderumier@odiso.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SeaBIOS will issue requests for more than 64k when loading a CD-ROM
image into memory. Support the TCHI register from the AMD PCscsi
spec.
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a 'hba_serial' property to the megasas driver. Originally
it would be using a pointer value which would break migration.
Reported-by: Stefan Weil <sw@weilnetz.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch provides a way to optionally suppress spurious interrupts,
as a workaround for systems described below:
Some old operating systems do not handle spurious interrupts well,
and qemu tends to generate them significantly more often than
real hardware.
Examples:
- Microport UNIX System V/386 v 2.1 (ca 1987)
(The main problem I'm fixing: Without this patch, it panics
sporadically when accessing the hard disk.)
- AT&T UNIX System V/386 Release 4.0 Version 2.1a (ca 1991)
See screenshot in "QEMU Official OS Support List":
http://www.claunia.com/qemu/objectManager.php?sClass=application&iId=9
(I don't have this system to test.)
- A report about OS/2 boot lockup from 2004 by Hampa Hug:
http://lists.nongnu.org/archive/html/qemu-devel/2004-09/msg00367.html
(My patch was partially inspired by his.)
Also: http://lists.nongnu.org/archive/html/qemu-devel/2005-06/msg00243.html
(I don't have this system to test.)
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
This patch adds some optional compatibility hacks (default
disabled) to allow Microport UNIX to function under qemu.
I've tried to structure it to be easy to add more hacks for other
old CGA programs, if anyone ever needs them.
Microport UNIX System V/386 v 2.1 (ca 1987) tries to program
the CGA registers directly with neither the assistance of BIOS, nor
with proper handling of EGA/VGA-only registers. Note that it didn't
work on real VGA hardware, either (although in that case, the most
obvious problems seemed to be out-of-range hsync and/or vsync
signalling, rather than the issues in this patch).
Eventually real MDA and/or CGA support might provide an alternative to
this patch, although a hybrid approach like this patch might still
be useful in marginal cases.
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
These are normally ifdefed out and don't matter. But if you enable
them, they ought to be correct.
Signed-off-by: Matthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: malc <av1474@comtv.ru>
We do not register ioeventfds unless the IVSHMEM_IOEVENTFD feature
is set. The same feature must be checked before releasing the eventfds.
Regression introduced by commit 563027c (ivshmem: use EventNotifier and
memory API, 2012-07-05).
Reported-by: Cam Macdonnell <cam@cs.ualberta.ca>
Tested-by: Cam Macdonnell <cam@cs.ualberta.ca>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
object_deinit is only called when the reference count goes to zero,
and yet tries to do an object_unparent. Now, object_unparent
either does nothing or it will decrease the reference count.
Because we know the reference count is zero, the object_unparent
call in object_deinit is useless.
Instead, we need to disconnect the object from its parent just
before we remove the last reference apart from the parent's. This
happens in object_delete. Once we do this, all calls to
object_unparent peppered through QEMU can go away.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This allows any QEMU binary to be executed with:
$QEMU_BINARY -M none -qmp stdio
Without errors from missing options that are required by various boards. This
also provides a mode that we can use in the future to construct machines
entirely through QMP commands.
Cc: Daniel Berrange <berrange@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kwolf/for-anthony:
virtio-blk: hide VIRTIO_BLK_F_CONFIG_WCE from old machine types
Documentation: Warn against qemu-img on active image
vmdk: Read footer for streamOptimized images
vmdk: Fix header structure
Conflicts:
hw/virtio-blk.c
* kraxel/usb.59:
ehci: Fix setting of halt bit from usbcmd register updates
ehci: fix Interrupt Threshold Control implementation
usb: update uas product id
usb: async control xfer fixup
Adopt the QOM parent field name and enforce QOM-style access via casts.
Don't just typedef PCIHostState, either use it directly or embed it.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Use PCIHostState and PCI_HOST_BRIDGE() where appropriate.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The preceding commits fixed misuses of FROM_SYSBUS() that led people to
add a bogus busdev field. For qdev the field order was less relevant but
for QOM the PCIHostState field (including the SysBusDevice actually
initialized with a value) must be placed first within the state struct.
To facilitate accessing the PCIHostState fields, derive all PCI host
bridges from TYPE_PCI_HOST_BRIDGE rather than TYPE_SYS_BUS_DEVICE.
We can now access PCIHostState QOM-style, with PCI_HOST_BRIDGE() macro.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constants and cast macros.
Avoid accessing parent fields directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant. Introduce cast macro to drop bogus busdev field
that would've broken SYS_BUS_DEVICE(). Avoid accessing parent fields
directly.
Free the identifier phb as acronym for PCI_HOST_BRIDGE.
Updated against conflicting merge from branch 'agraf/ppc-for-upstream'
(0d16fdd732), which removed busdev field
differently, moved some code around and added new occurrences of 'phb'.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro. Avoid accessing parent fields
directly.
Also add missing space and braces.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro. Avoid accessing parent fields
directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro. Avoid accessing its parent field
directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant. Introduce cast macro to drop dummy busdev field
used with FROM_SYSBUS() macro that would've broken SYS_BUS_DEVICE().
Avoid accessing DeviceState indirectly through PCIHostState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant. Introduce cast macro to drop dummy busdev field
used with FROM_SYSBUS() that would've broken SYS_BUS_DEVICE().
Avoid accessing parent fields directly.
Drop no-op reset function.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant. Introduce cast macro and drop dummy busdev
field used with FROM_SYSBUS() that would've broken SYS_BUS_DEVICE().
Avoid accessing parent fields directly.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant. Avoid accessing DeviceState or SysBusDevice
indirectly through PCIHostState field.
Drop global state by passing BonitoState as opaque and adding the IRQs
and a pointer to PCIBonitoState to its state.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Introduce type constant and cast macro. Don't access DeviceState
or PCIHostState indirectly through parent fields.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
During the QOM migration they were amended with further info but this is
no longer the case. All static TypeInfos can be const these days.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
QEMU has a policy of keeping a stable guest device ABI. When new guest device
features are introduced they must not change hardware info seen by existing
guests. This is important because operating systems or applications may
"fingerprint" the hardware and refuse to run when the hardware changes. To
always get the latest guest device ABI, run with x86 machine type "pc".
This patch hides the new VIRTIO_BLK_F_CONFIG_WCE virtio feature bit from
existing machine types. Only pc-1.2 and later will expose this feature
by default.
For more info on the VIRTIO_BLK_F_CONFIG_WCE feature bit, see:
commit 13e3dce068
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Aug 9 16:07:19 2012 +0200
virtio-blk: support VIRTIO_BLK_F_CONFIG_WCE
Also rename VIRTIO_BLK_F_WCACHE to VIRTIO_BLK_F_WCE for consistency with
the spec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anthony Liguori <aliguori@us.ibm.com> reported:
This broke qemu-test because it changed the pc-1.0 machine type:
Setting guest RANDOM seed to 47167
*** Running tests ***
Running test /tests/finger-print.sh... OK
--- fingerprints/pc-1.0.x86_64 2011-12-18 13:08:40.000000000 -0600
+++ fingerprint.txt 2012-08-12 13:30:48.000000000 -0500
@@ -55,7 +55,7 @@
/sys/bus/pci/devices/0000:00:06.0/subsystem_device=0x0002
/sys/bus/pci/devices/0000:00:06.0/class=0x010000
/sys/bus/pci/devices/0000:00:06.0/revision=0x00
-/sys/bus/pci/devices/0000:00:06.0/virtio/host-features=0x710006d4
+/sys/bus/pci/devices/0000:00:06.0/virtio/host-features=0x71000ed4
/sys/class/dmi/id/bios_vendor=Bochs
/sys/class/dmi/id/bios_date=01/01/2007
/sys/class/dmi/id/bios_version=Bochs
Guest fingerprint changed for pc-1.0!
Reported-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This MMIO area is an entry gate to legacy PC ISA devices, addressed via
PIO over there. Quite a few of the PIO ports have side effects on access
like starting/stopping timers that must be executed properly ordered
/wrt the CPU. So we have to remove the coalescing mark.
Acked-by: Hervé Poussineau <hpoussin@reactos.org>
Acked-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Hotplug and parameter change are new in 1.2, disable them via compat
properties for pc-1.1 and earlier.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pc_cmos_init() always claims 640KiB base memory, and ram_size - 1MiB
extended memory. The latter can underflow to "lots of extended
memory". Fix both, and clean up some.
Note: SeaBIOS currently requires 1MiB of RAM, and doesn't check
whether it got enough.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
hw/scsi-bus.c:758: warning: ‘xfer’ may be used uninitialized in this
function
Isn't true, but older gcc versions (for example 4.1 as shipped in rhel5)
are not clever enougth to figure, so sprinkle in a default: line to make
them happy.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use g_strdup_printf() instead.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
QEMU has a policy of keeping a stable guest device ABI. When new guest device
features are introduced they must not change hardware info seen by existing
guests. This is important because operating systems or applications may
"fingerprint" the hardware and refuse to run when the hardware changes. To
always get the latest guest device ABI, run with x86 machine type "pc".
This patch hides the new VIRTIO_BLK_F_CONFIG_WCE virtio feature bit from
existing machine types. Only pc-1.2 and later will expose this feature
by default.
For more info on the VIRTIO_BLK_F_CONFIG_WCE feature bit, see:
commit 13e3dce068
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Thu Aug 9 16:07:19 2012 +0200
virtio-blk: support VIRTIO_BLK_F_CONFIG_WCE
Also rename VIRTIO_BLK_F_WCACHE to VIRTIO_BLK_F_WCE for consistency with
the spec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Anthony Liguori <aliguori@us.ibm.com> reported:
This broke qemu-test because it changed the pc-1.0 machine type:
Setting guest RANDOM seed to 47167
*** Running tests ***
Running test /tests/finger-print.sh... OK
--- fingerprints/pc-1.0.x86_64 2011-12-18 13:08:40.000000000 -0600
+++ fingerprint.txt 2012-08-12 13:30:48.000000000 -0500
@@ -55,7 +55,7 @@
/sys/bus/pci/devices/0000:00:06.0/subsystem_device=0x0002
/sys/bus/pci/devices/0000:00:06.0/class=0x010000
/sys/bus/pci/devices/0000:00:06.0/revision=0x00
-/sys/bus/pci/devices/0000:00:06.0/virtio/host-features=0x710006d4
+/sys/bus/pci/devices/0000:00:06.0/virtio/host-features=0x71000ed4
/sys/class/dmi/id/bios_vendor=Bochs
/sys/class/dmi/id/bios_date=01/01/2007
/sys/class/dmi/id/bios_version=Bochs
Guest fingerprint changed for pc-1.0!
Reported-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu_system_reset() function always performs the same basic actions on
all machines. This includes running all the reset handler hooks,
however the order in which these will run is not always easily predictable.
This patch splits the core of qemu_system_reset() - the invocation of
the reset handlers - out into a new qemu_devices_reset() function.
qemu_system_reset() will usually call qemu_devices_reset(), but that
can be now overriden by a new reset method in the QEMUMachine
structure.
Individual machines can use this reset method, if necessary, to
perform any extra, machine specific initializations which have to
occur before or after the bulk of the reset handlers. It's expected
that the method will call qemu_devices_reset() at some point, but if
the machine has really strange ordering requirements between devices
resets it could even override that with it's own reset sequence (with
great care, obviously).
For a specific example of when this might be needed: a number of
machines (but not PC) load images specified with -kernel or -initrd
directly into the machine RAM before booting the guest. This mostly
works at the moment, but to make this actually safe requires that this
load occurs after peripheral devices are reset - otherwise they could
have active DMAs in progress which would clobber the in memory images.
Some machines (notably pseries) also have other entry conditions which
need to be set up as the last thing before executing in guest space -
some of this could be considered "emulated firmware" in the sense that
the actions of the firmware are emulated directly by qemu rather than
by executing a firmware image within the guest. When the platform's
firmware to OS interface is sufficiently well specified, this saves
time both in implementing the "firmware" and executing it.
aliguori: don't unconditionally dereference current_machine
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The pseries machine already supports the -vga std option, creating a
graphics adapter. However, this is not very useful without being able to
add a keyboard and mouse as well. This patch addresses this by adding
a USB interface when requested, and automatically adding a USB keyboard
and mouse when VGA is enabled.
This is a stop gap measure to get usable graphics mode on pseries while
waiting for Li Zhang's rework of USB options to go in after 1.2.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This fixes linux guests started without any USB devices not seeing newly
plugged devices until "lsusb" is done inside the guest.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
First, not all interrupts are subject to Interrupt Threshold Control,
some of them must be delivered without delay.
Second, Interrupt Threshold Control state must be part of vmstate,
otherwise we might loose IRQs on migration.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pick other product id to fix clash with audio.
Current usage list (after applying this patch):
46f4:0001 -- usb-storage
46f4:0002 -- usb-audio
46f4:0003 -- usb-uas
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Need to clear p->result after copying setup data using usb_packet_copy()
because we'll reuse the USBPacket for the data transfer.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* agraf/ppc-for-upstream: (24 commits)
openpic: Added BRR1 register
pseries: Update SLOF firmware image
pseries dma: DMA window params added to PHB and DT population changed
pseries: Add PCI MSI/MSI-X support
pseries: Add trace event for PCI irqs
pseries: Export find_phb() utility function for PCI code
pseries: added allocator for a block of IRQs
pseries: Separate PCI RTAS setup from common from emulation specific PCI setup
pseries: Rework irq assignment to avoid carrying qemu_irqs around
pseries: Remove extraneous prints
pseries: Update SLOF
PPC: spapr: Remove global variable
PPC: spapr: Rework VGA select logic
xbzrle: fix compilation on ppc32
spapr: Add support for -vga option
Add one new file vga-pci.h and cleanup on all platforms
Revert "PPC: e500: Use new MPIC dt format"
ppc: Fix bug in handling of PAPR hypercall exits
PPC: e500: add generic e500 platform
PPC: e500: split mpc8544ds machine from generic e500 code
...
* stefanha/trivial-patches:
ivshmem, qdev-monitor: fix order of qerror parameters
iov_send_recv(): Handle zero bytes case even if OS does not
framebuffer: Fix spelling in comment (leight -> height)
Spelling fix in comment (peripherans -> peripherals)
docs: Fix spelling (propery -> property)
trace: Fix "Qemu" -> "QEMU"
cputlb.c: Fix out of date comment
ehci: fix assertion typo
Makefile: Avoid explicit list of directories in clean target
Linux mpic driver uses (changes may be in pipeline to get upstreamed soon)
BRR1. This patch adds the support to emulate readonly FSL BRR1 register.
Currently QEMU does not fully emulate any version on MPIC, so the MPIC
Major number and Minor number are set to 0.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Previously the only PCI bus supported was the emulated PCI bus with
fixed DMA window with start at 0 and size 1GB. As we are going to support
PCI pass through which DMA window properties are set by the host
kernel, we have to support DMA windows with parameters other than default.
This patch adds:
1. DMA window properties to sPAPRPHBState: LIOBN (bus id), start,
size of the window.
2. An additional function spapr_dma_dt() to populate DMA window
properties in the device tree which simply accepts all the parameters
and does not try to guess what kind of IOMMU is given to it.
The original spapr_dma_dt() is renamed to spapr_tcet_dma_dt().
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch implements MSI and MSI-X support for the pseries PCI host
bridge. To do this it adds:
* A "config_space_address to msi_table" map, since the MSI RTAS calls
take a PCI config space address as an identifier.
* A MSIX memory region to catch msi_notify()/msix_notiry() from
virtio-pci and pass them to the guest via qemu_irq_pulse().
* RTAS call "ibm,change-msi" which sets up MSI vectors for a
device. Note that this call may configure and return lesser number of
vectors than requested.
* RTAS call "ibm,query-interrupt-source-number" which translates MSI
vector to interrupt controller (XICS) IRQ number.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix error case ndev < 0]
Signed-off-by: Alexander Graf <agraf@suse.de>
This adds a trace event in the pseries PCI specific set_irq() function to
assist in debugging.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: add trace.h include]
Signed-off-by: Alexander Graf <agraf@suse.de>
The pseries PCI code makes use of an internal find_dev() function which
locates a PCIDevice * given a (platform specific) bus ID and device
address. Internally this needs to first locate the host bridge on which
the device resides based on the bus ID. This patch exposes that host
bridge lookup as a separate function, which we will need later in the MSI
and VFIO code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: drop trace.h inclusion]
Signed-off-by: Alexander Graf <agraf@suse.de>
The patch adds a simple helper which allocates a consecutive sequence
of IRQs calling spapr_allocate_irq for each and checks that allocated
IRQs go consequently.
The patch is required for upcoming support of MSI/MSIX on POWER.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the RTAS functions for handling PCI are registered from the
class init code for the PCI host bridge. That sort of makes sense
now, but will break in the future when vfio gives us multiple types of
host bridge for pseries (emulated and pass-through, at least). The
RTAS functions will be common across all host bridge types (and will
call out to different places internally depending on the type).
So, this patch moves the RTAS registration into its own function
called direct from the machine setup code.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently, the interfaces in the pseries machine code for assignment
and setup of interrupts pass around qemu_irq objects. That was done
in an attempt not to be too closely linked to the specific XICS
interrupt controller. However interactions with the device tree setup
made that attempt rather futile, and XICS is part of the PAPR spec
anyway, so this really just meant we had to carry both the qemu_irq
pointers and the XICS irq numbers around.
This mess will just get worse when we add upcoming PCI MSI support,
since that will require tracking a bunch more interrupt. Therefore,
this patch reworks the spapr code to just use XICS irq numbers
(roughly equivalent to GSIs on x86) and only retrieve the qemu_irq
pointers from the XICS code when we need them (a trivial lookup).
This is a reworked and generalized version of an earlier spapr_pci
specific patch from Alexey Kardashevskiy.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
[agraf: fix checkpath warning]
Signed-off-by: Alexander Graf <agraf@suse.de>
The pseries machine prints several messages to stderr whenever it starts up
and another whenever the vm is reset. It's not normal for qemu machines to
do this though, so this patch removes them. We can put them back
conditional on a DEBUG symbol if we really need them in future.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
When selecting our VGA adapter, we want to:
* fail completely when we can't satisfy the user's request
* support -nographic where no VGA adapter should be spawned
This patch reworks the logic so we fulfill the two conditions above.
Signed-off-by: Alexander Graf <agraf@suse.de>
Also instanciate the USB keyboard and mouse when that option is used
(you can still use -device to create individual devices without all
the defaults)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
[agraf: remove USB bits]
Signed-off-by: Alexander Graf <agraf@suse.de>
Functions pci_vga_init() and pci_cirrus_vga_init() are declared
in pc.h. That prevents other platforms (e.g. sPAPR) to use them.
This patch is to create one new file vga-pci.h and move the
declarations to vga-pci.h, so that they can be shared by
all platforms. This patch also cleans up on all platforms.
Signed-off-by: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
This reverts commit 518c7fb44f. It breaks
new Linux guests with SMP, because IPIs get mapped to large vectors which
our MPIC emulation does not implement.
Conflicts:
hw/ppc/e500.c
This gives the kernel a paravirtualized machine to target, without
requiring both sides to pretend to be targeting a specific board
that likely has little to do with the host in KVM scenarios. This
avoids the need to add new boards to QEMU, just to be able to
run KVM on new CPUs.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: Alexander Graf <agraf@suse.de>
Currently the only mpc8544ds-ism that is factored out is
toplevel compatible and model. In the future the generic e500
code is expected to become more generic.
Signed-off-by: Scott Wood <scottwood@freescale.com>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: Alexander Graf <agraf@suse.de>
No functional changes -- machine is still outwardly mpc8544ds.
The references that are not changed contain mpc8544 hardware details that
need to be parameterized if/when a different e500 platform wants to
change them.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Rename the file (with no changes other than fixing up the header paths)
in preparation for refactoring into a generic e500 platform. Also move
it into the newly created ppc/ directory.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
[agraf: conditionalize on CONFIG_FDT]
Signed-off-by: Alexander Graf <agraf@suse.de>
spapr_populate_pci_devices() populates the device tree only with bus
properties and has nothing to do with the devices on it as PCI BAR
allocation is done by the system firmware (SLOF).
New name - spapr_populate_pci_dt() - describes the functionality better.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
The PCIHostState struct already contains SysBusDevice so
the one in sPAPRPHBState has to go.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now that the QERR_ macros no longer contain a json dictionary,
the order of some parameters needs to be fixed for them to appear
correctly.
Signed-off-by: Alberto Garcia <agarcia@igalia.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
We need at least 1M of RAM to map the option ROM. Otherwise, we will
corrupt host memory or even crash:
$ qemu-system-x86_64 -nodefaults --enable-kvm -vnc :0 -m 640k
Segmentation fault (core dumped)
Reported-and-tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
0cdd3d1444 fixed reading back the counter load time from the kernel
while assuming the kernel would always update its load time on writing
the state. That is only true for channel 1, and so pit_get_channel_info
returned wrong output pin states for high counter values.
Fix this by applying the offset also on kvm_pit_put. Now we also need to
update the offset when we write the state while the VM is stopped as it
keeps on changing in that state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
To prepare the final fix for clock calibration issues with the in-kernel
PIT, we want to cache the offset between vmclock and the clock used by
the in-kernel PIT. So far, we only need to update it when the VM state
changes between running and stopped because we only read the in-kernel
PIT state while the VM is running.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
* qmp/queue/qmp: (48 commits)
target-ppc: add implementation of query-cpu-definitions (v2)
target-i386: add implementation of query-cpu-definitions (v2)
qapi: add query-cpu-definitions command (v2)
compiler: add macro for GCC weak symbols
qapi: add query-machines command
qapi: mark QOM commands stable
qmp: introduce device-list-properties command
qmp: add SUSPEND_DISK event
qmp: qmp-events.txt: add missing doc for the SUSPEND event
qmp: qmp-events.txt: put events in alphabetical order
qmp: emit the WAKEUP event when the guest is put to run
qmp: don't emit the RESET event on wakeup from S3
scripts: qapi-commands.py: qmp-commands.h: include qdict.h
docs: writing-qmp-commands.txt: update error section
error, qerror: drop QDict member
qerror: drop qerror_table and qerror_format()
error, qerror: pass desc string to error calls
error: drop error_get_qobject()/error_set_qobject()
qemu-ga: switch to the new error format on the wire
qmp: switch to the new error format on the wire
...
* pmaydell/arm-devs.next:
arm: Move some ARM devices into libhw
ssd0323: abort() instead of exit(1) on error.
hw/sd.c: make sd_wp_addr() return bool
hw/sd.c: make sd_dataready() return bool
hw/sd.c: convert binary variables to bool
hw/sd.c: introduce wrapper for conversion address to wp group
hw/sd.c: make sd_wp_addr() accept 64 bit address argument
hw/sd.c: convert wp_groups in SDState to bitfield
armv7m: Guard against no -kernel argument
hw/armv7m_nvic: Fix incorrect default for num-irqs property
Emitted when the guest makes a request to enter S4 state.
There are three possible ways of having this event, as described here:
http://lists.gnu.org/archive/html/qemu-devel/2012-07/msg02307.html
I've decided to add a new event and make it indepedent of SHUTDOWN.
This means that the SHUTDOWN event will eventually follow the
SUSPEND_DISK event.
I've choosen this way because of two reasons:
1. Having an indepedent event makes it possible to query for its
existence by using query-events
2. In the future, we may allow the user to change what QEMU should
do as a result of the guest entering S4. So it's a good idea to
keep both events separated
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Avoids some unnecessary dependencies on cpu.h and prepares for
a future armeb-softmmu where most machines would not be built.
Defer touching the SoC devices since most have implicit or explicit
dependencies on the CPU.
Signed-off-by: Andreas Färber <andreas.faerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* qemu-kvm/uq/master:
kvm: Add documentation comment for kvm_irqchip_in_kernel()
kvm: Decouple 'GSI routing' from 'kernel irqchip'
kvm: Decouple 'MSI routing via irqfds' from 'kernel irqchip'
kvm: Decouple 'irqfds usable' from 'kernel irqchip'
kvm: Move kvm_allows_irq0_override() to target-i386, fix return type
kvm: Rename kvm_irqchip_set_irq() to kvm_set_irq()
kvm: Decouple 'async interrupt delivery' from 'kernel irqchip'
configure: Don't implicitly hardcode list of KVM architectures
kvm: Check if smp_cpus exceeds max cpus supported by kvm
To be more consistent with the newer ways of error signalling. That and SIGABT
is easier to debug with than exit(1).
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For the sake of code clarity
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Several members of SDState have type int when they actually are binary variables.
Change type of these variables to bool to improve code readability. Change SD API
to be in consistency with new variables type.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add wrapper function sd_addr_to_wpnum() to replace long address-->wg_group
conversion line.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently sd_wp_addr() accepts 32 bit address arguments therefore implicitly
restricting SD card address range. Change address argument type to uint64_t.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Representing each group write protection flag with only one bit instead of int
variable significantly reduces memory consumption.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@samsung.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A -kernel argument must be specified for this machine. Guard against no -kernel
argument. Previously gave an unhelpful "bad address" error message.
Signed-off-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix an incorrect default value for the num-irqs property (we were
attempting to override it from the default set by the parent class
but not succeeding, which meant that the lm3s6965evb model would
assert on startup attempting to wire up nonexistent irq lines).
Instead of trying to override the parent's Property array, we
define an instance_init function which runs after default setup
but before user property setting and can just fix up the default
value in the gic_state struct.
Reported-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Tested-by: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Re-implemented the interconnect between the Xilinx AXI ethernet and DMA
controllers. A QOM interface "stream" is created, for the two stream interfaces.
As per Edgars request, this is designed to be more generic than AXI-stream,
so in the future we may see more clients of this interface beyond AXI stream.
This is based primarily on Paolos original refactoring of the interconnect.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
* kwolf/for-anthony:
qemu-iotests: skip 039 with ./check -nocache
block: add BLOCK_O_CHECK for qemu-img check
qcow2: mark image clean after repair succeeds
qed: mark image clean after repair succeeds
blockdev: flip default cache mode from writethrough to writeback
virtio-blk: disable write cache if not negotiated
virtio-blk: support VIRTIO_BLK_F_CONFIG_WCE
qemu-iotests: Save some sed processes
ahci: Fix sglist memleak in ahci_dma_rw_buf()
ahci: Fix ahci cdrom read corruptions for reads > 128k
virtio-blk: fix use-after-free while handling scsi commands
* bonzini/scsi-next:
scsi-disk: add support for the UNMAP command
scsi-disk: improve out-of-range LBA detection for WRITE SAME
scsi-disk: more assertions and resets for aiocb
virtio-scsi: do not compare 32-bit QEMU tags against 64-bit virtio-scsi tags
iscsi: Pick default initiator-name based on the name of the VM
iscsi: reorganize code for parse_initiator_name
iscsi: do not leak initiator_name
This patch sets is_default to 1 for puv3 machine, so that
find_default_machine() returns puv3 machine.
Thanks Dunrong for pointing it out.
Cc: Dunrong Huang <riegamaths@gmail.com>
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 dma (Direct Memory Access) support,
include dma device simulation for kernel booting.
v1->v2: Add initialization to ret in puv3_dma_read.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 pm (power management) support,
include pm device simulation for kernel booting.
Thank Blue Swirl for pointing out the missing "break".
v1->v2: Add initialization to ret in puv3_pm_read.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 gpio (General Purpose Input/Output) support,
include gpio device simulation and its interrupt support.
v1->v2: Add initialization to ret in puv3_gpio_read.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 ostimer support, include os timer
device simulation and ptimer support in puv3 machine.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds puv3 interrupt support, include interrupt controler
device simulation and interrupt handler in puv3 machine.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch only add puv3 soc/board support, which introduces puv3
machine description, and specifies console type.
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch adds unicore32-softmmu build support, include configure,
makefile, arch_init, and all missing functions needed by softmmu.
Although all missing functions are empty, unicore32-softmmu could
be build successfully.
By 20120804: change QEMU_ARCH_UNICORE32 to 0x4000
Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
If the guest does not support flushes, we should run in writethrough mode.
The setting is temporary until the next reset, so that for example the
BIOS will run in writethrough mode while Linux will run with a writeback
cache.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Also rename VIRTIO_BLK_F_WCACHE to VIRTIO_BLK_F_WCE for consistency with
the spec.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
I noticed that in hw/ide/ahci:ahci_dma_rw_buf() we do not free the sglist. Thus,
I've added a call to qemu_sglist_destroy() to fix this memory leak.
In addition, I've adeed a call in qemu_sglist_destroy() to 0 all of the sglist
fields, in case there is some other codepath that tries to free the sglist.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
While testing q35, which has its cdrom attached to the ahci controller, I found
that the Fedora 17 install would panic on boot. The panic occurs while
squashfs is trying to read from the cdrom. The errors are:
[ 8.622711] SQUASHFS error: xz_dec_run error, data probably corrupt
[ 8.625180] SQUASHFS error: squashfs_read_data failed to read block
0x20be48a
I was also able to produce corrupt data reads using an installed piix based
qemu machine, using 'dd'. I found that the corruptions were only occuring when
then read size was greater than 128k. For example, the following command
results in corrupted reads:
dd if=/dev/sr0 of=/tmp/blah bs=256k iflag=direct
The > 128k size reads exercise a different code path than 128k and below. In
ide_atapi_cmd_read_dma_cb() s->io_buffer_size is capped at 128k. Thus,
ide_atapi_cmd_read_dma_cb() is called a second time when the read is > 128k.
However, ahci_dma_rw_buf() restart the read from offset 0, instead of at 128k.
Thus, resulting in a corrupted read.
To fix this, I've introduced 'io_buffer_offset' field in IDEState to keep
track of the offset. I've also modified ahci_populate_sglist() to take a new
3rd offset argument, so that the sglist is property initialized.
I've tested this patch using 'dd' testing, and Fedora 17 now correctly boots
and installs on q35 with the cdrom ahci controller.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The scsi passthrough handler falls through after completing a
request into the failure path, resulting in a use after free.
Reproducible by running a guest with aio=native on a block device.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This fixes the following error:
$ qemu-system-xtensa -cpu help
Segmentation fault
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This makes usable default for -cpu option both for qemu-system-xtensa
and qemu-system-xtensaeb fixing the following error:
$ qemu-system-xtensaeb -M sim
Unable to find CPU definition
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
LOAD_UNLOAD and START_STOP have same value, so the table
entry is initialized twice. Spotted by Clang compiler.
Remove LOAD_UNLOAD entry since START_STOP entry already
represents both.
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The qemu_irq for Terminal Count (TC) line between FDC and Slavio misc
device was created only after use, spotted by Clang compiler. Also,
it was not created if the FDC didn't exist.
Rearrange code to fix order. Always create the TC line.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Difference with AMD PCscsi is that DC-390 contains a EEPROM,
and that a romfile is available to add INT13 support.
This has been successfully tested on:
- MS DOS 6.22 (using DC390 ASPI driver)
- MS Windows 98 SE (using DC390 driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using DC390 driver)
- hard disk and cdrom boot
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This reverts commit 0883c5159f.
Those stubs were only used by PCI ESP emulation, which is now
not compiled on architectures which have no PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
sparc machines loose ability to instanciate PCI ESP SCSI adapter,
which is not a big loose as they don't have PCI bus support.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The unmap command can reuse the same infrastructure as MODE SELECT
for reading the descriptor list into memory. The descriptors are
processed sequentially.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leaving the aiocb to a non-NULL value leads to an assertion failure when
rerror/werror are set to stop or enospc, and the operation is retried.
scsi-disk checks that the aiocb member is NULL before filling it.
This patch correctly resets the aiocb to NULL values everywhere,
and adds the dual assertion that the aiocb was non-NULL before
calling bdrv_acct_done.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Decouple another x86-specific assumption about what irqchips imply.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_allows_irq0_override() is a totally x86 specific concept:
move it to the target-specific source file where it belongs.
This means we need a new header file for the prototype:
kvm_i386.h, in line with the existing kvm_ppc.h.
While we are moving it, fix the return type to be 'bool' rather
than 'int'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
Rename the function kvm_irqchip_set_irq() to kvm_set_irq(),
since it can be used for sending (asynchronous) interrupts whether
there is a full irqchip model in the kernel or not. (We don't
include 'async' in the function name since asynchronous is the
normal case.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes a problem in handling task management functions
in virtio-scsi. The cause of the problem is a mismatch between
the size of the tag in QEMU (32-bit) and virtio-scsi (64-bit).
Changing the QEMU size is hard because the migration format
uses 32 bits to store the tag; so just don't use the QEMU tag
(virtio-scsi only uses the tag for task management functions
anyway) and look up the full 64-bit tag in the hba_private field.
The reproducer is a bit obscure. If you cause an I/O timeout
(for example with rerror=stop and doing 'cont' on the monitor
continuously without fixing the error), sooner or later the
guest will try to abort the command and reissue it. At this
point, QEMU will report _two_ errors instead of one when you
hit 'c', because the first error has not been canceled correctly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 5931065907 is incomplete,
we'll arrive in the scsi command complete callback in CSW state
and must handle that case correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Legacy -drive cyls=... are now ignored completely when the drive
doesn't back a hard disk device. Before, they were first checked
against a hard disk's limits, then ignored.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit b1f416aa8d breaks vhost_net
because it always registers the virtio_pci_host_notifier_read() handler
function on the ioeventfd, even when vhost_net.ko is using the ioeventfd.
The result is both QEMU and vhost_net.ko polling on the same eventfd
and the virtio_net.ko guest driver seeing inconsistent results:
# ifconfig eth0 192.168.0.1 netmask 255.255.255.0
virtio_net virtio0: output:id 0 is not a head!
To fix this, proceed the same as we do for irqfd: add a parameter to
virtio_queue_set_host_notifier_fd_handler and in that case only set
the notifier, not the handler.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Tested-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/scsi-next:
scsi: add support for ATA_PASSTHROUGH_xx scsi command
esp: add missing const on TypeInfo structures
esp: enable for all PCI machines
Revert "megasas: disable due to build breakage"
megasas: static SAS addresses
scsi-disk: fix compilation with DEBUG_SCSI
megasas: Update function megasys_scsi_uninit
SCSI: STARTSTOPUNIT only eject/load media if powercondition is 0
SCSI: Update the sense code for PREVENT REMOVAL errors
Correct the command names of opcode 0x85 and 0xa1, and calculate
their xfer size from CDB.
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* stefanha/net:
net: add the support for -netdev socket, listen
net: fix the coding style
hub: add the support for hub own flow control
net: determine if packets can be sent before net queue deliver packets
net: cleanup deliver/deliver_iov func pointers
net: Make "info network" output more readable info
net: Rename qemu_del_vlan_client() to qemu_del_net_client()
net: Rename vc local variables to nc
net: Rename VLANClientState to NetClientState
net: Rename non_vlan_clients to net_clients
net: Remove VLANState
net: Remove vlan code from net.c
net: Convert qdev_prop_vlan to peer with hub
net: Drop vlan argument to qemu_new_net_client()
hub: Check that hubs are configured correctly
net: Look up 'vlan' net clients using hubs
net: Use hubs for the vlan feature
net: Add a hub net client
net: Add interface to bridge when SIOCBRADDIF isn't available
This patch introduces a new property 'sas_address' which
allows the user to specify the SAS address for the HBA.
The default address is following the NAA locally assigned
identifier format with the locally assigned address
0x525400 as used eg for the MAC addresses.
The lower bytes are set to the pci address which
will ensure uniqueness for the local machine.
The port addresses are now calculated based on the magic
number 0x1221 (which is found in real hardware, too) plus
the device number.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andreas Faerber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit f90c2bcdbc changed
PCIUnregisterFunc, therefore the function prototype
needs an update.
megasas.o is currently not linked, so this bug was not
detected by the buildbots.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The START STOP UNIT command will only eject/load media if
power condition is zero.
If power condition is !0 then LOEJ and START will be ignored.
From MMC (sbc contains similar wordings too)
The Power Conditions field requests the block device to be placed
in the power condition defined in
Table 558. If this field has a value other than 0h then the Start
and LoEj bits shall be ignored.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the sense codes for failures to eject a device that is locked
by PREVENT_ALLOW_MEDIUM_REMOVAL from
the generic MEDIA_LOAD_OR_EJECT_FAILED to the more specific
MEDIUM_REMOVAL_PREVENTED.
The second sense code is more accurate, and is also listed in MMC annex F
for the recommended sense codes for MMC devices while the first sense code is not.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Moving reset callback into cpu object from board level and
resetting cpu at the end of x86_cpu_realize() will allow properly
create cpu object during run-time (hotplug) without calling reset externaly.
When reset over QOM hierarchy is implemented, reset callback
should be removed.
v2:
- leave cpu_reset in pc_new_cpu() for now, it's to be cleaned up when APIC
init is moved in cpu.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
MP initialization protocol differs between cpu families, and for P6 and
onward models it is up to CPU to decide if it will be BSP using this
protocol, so try to model this. However there is no point in implementing
MP initialization protocol in qemu. Thus first CPU is always marked as BSP.
This patch:
- moves decision to designate BSP from board into cpu, making cpu
self-sufficient in this regard. Later it will allow to cleanup hw/pc.c
and remove cpu_reset and wrappers from there.
- stores flag that CPU is BSP in IA32_APIC_BASE to model behavior
described in Inted SDM vol 3a part 1 chapter 8.4.1
- uses MSR_IA32_APICBASE_BSP flag in apic_base for checking if cpu is BSP
patch is based on Jan Kiszka's proposal:
http://thread.gmane.org/gmane.comp.emulators.qemu/100806
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
xen_pt_unregister_device is used as PCIUnregisterFunc, so it should
match the type.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Another step in moving the vlan feature out of net core. Users only
deal with NetClientState and therefore qemu_del_vlan_client() should be
named qemu_del_net_client().
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Now that VLANClientState has been renamed to NetClientState all 'vc'
local variables should be 'nc'. Much of the code already used 'nc' but
there are places where 'vc' needs to be renamed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The vlan feature is no longer part of net core. Rename VLANClientState
to NetClientState because net clients are not explicitly associated with
a vlan at all, instead they have a peer net client to which they are
connected.
This patch is a mechanical search-and-replace except for a few
whitespace fixups where changing VLANClientState to NetClientState
misaligned whitespace.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
VLANState is no longer used and can be removed.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
The vlan implementation in net.c has been replaced by hubs so we can
remove the code.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Instead of using VLANState use net/hub.h to support the vlan qdev
property. The vlan qdev property becomes an alias for the peer qdev
property but is represented as a VLAN ID number. When a VLAN ID is
selected the device will really peer with a hub port.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
For 9p we can get the attach request multiple times for the
same export. So don't adding migration blocker for every
attach request.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
* bonzini/scsi-next: (32 commits)
virtio-scsi: enable MSI-X support
virtio-scsi: add ioeventfd support
virtio-scsi: report parameter change events
virtio-scsi: do not report dropped events after reset
virtio-scsi: Report missed events
virtio-scsi: Implement hotplug support for virtio-scsi
scsi: report parameter changes to HBA drivers
scsi-disk: report resized disk via sense codes
scsi: establish precedence levels for unit attention
scsi: introduce hotplug() and hot_unplug() interfaces for SCSI bus
scsi: add tracepoint for scsi_req_cancel
scsi-disk: removable hard disks support load/eject
scsi-disk: Fail medium writes with proper sense for readonly LUNs
scsi-disk: improve the lba-out-of-range tests for read/write/verify
scsi-disk: rd/wr/vr-protect !=0 is an error
scsi-disk: support toggling the write cache
scsi-disk: parse MODE SELECT commands and parameters
scsi-disk: fix changeable values for MODE_PAGE_R_W_ERROR
scsi-disk: adjust offsets in MODE SENSE by 2
scsi-disk: support emulated TO_DEV requests
...
Drop a duplicate definition of the 'disabled' property from
the escc qdev property list: this redefinition is currently
effectively ignored but will become an error. (The duplication
was inadvertently introduced in 2009 in commit ec02f7dec2.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Frber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
While virtio-scsi does support multiqueue, the default number of
interrupt vectors is not enough to actually enable usage of
multiple queues in the driver; this is because with only 2
vectors the driver will not be able to use a separate
interrupt for each request queue. Derive the desired number
of vectors from the number of request queues.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Probably due to bad merge months ago, virtio-scsi-pci did not have
ioeventfd support. Fix this and enable it by default, as is the
case for other virtio-pci devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When an event is reported but no buffers are present in the event vq,
we can set a flag and report a dummy event as soon as one is added.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement the hotplug() and hot_unplug() interfaces in virtio-scsi, by signal
the virtio_scsi.ko in guest kernel via event virtual queue.
The counterpart patch of virtio_scsi.ko will be sent soon in another thread.
Signed-off-by: Sen Wang <senwang@linux.vnet.ibm.com>
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
[ Add memset, fix LUN field, placate checkpatch - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux will not use these, but a very similar mechanism will be used to
report the condition via virtio-scsi events.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a device is resized, we will report a unit attention condition
for CAPACITY DATA HAS CHANGED. However, we should ensure that this
condition does not override a more important unit attention condition.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add two interfaces hotplug() and hot_unplug() to scsi bus info.
The scsi bus can implement these two interfaces to signal the HBA driver
of guest kernel to add/remove the scsi device in question.
Signed-off-by: Sen Wang <senwang@linux.vnet.ibm.com>
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
[ Fixed braces and indentation - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Support for the LOEJ bit of the START/STOP UNIT command right now is
limited to CD-ROMs. This is wrong, since removable hard disks (in the
real world: SD card readers) also support it in pretty much the same way.
Without the LOEJ bit, START/STOP UNIT does nothing for all devices.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add sense code for DATA_PROTECT/WRITE_PROTECTED and return this error
for any WRITE*/WRITE_VERIFY* calls if the device is readonly=on,
i.e. write-protected
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Improve the tests for the LBA to cover more cases.
For the 16 byte opcodes, the lba is a uint64, so we need to check is to
make sure that we do not wrap. For example if an opcode would specify
the LBA:0xffffffffffffffff and LEN:2 then lba+len would wrap to 1.
Also verify that ALL requested blocks are available, not just the first one.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The QEMU SCSI emulation does not support protection information,
so any READ/WRITE/VERIFY commands that has the protect bits set to
non-zero should fail with ILLEGAL_REQUEST/INVALID_FIELD_IN_CDB
From SCSI SBC :
If the logical unit does not support protection information,
then the device server should terminate the command with CHECK CONDITION
status with the sense key set to ILLEGAL REQUEST and the additional sense
code set to INVALID FIELD IN CDB.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
[ Rebase after scsi_dma_reqops introduction - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Finally, this uses the "plumbing" in the previous patch to
add support for toggling the WCE bit of the caching mode page.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds the bulk of the parsing code for MODE SELECT, including
breaking out changes to different mode pages, and checking that only
changeable values are modified.
In order to report errors correctly two passes are made through the
parameters; the first only looks for errors, the second actually
applies the changes to the mode page.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This will make offsets the same when implementing MODE SELECT. This is
because MODE SELECT has to deal with both 2-byte and 4-byte headers.
Unfortunately, this means that the offsets are now off by two compared
to the descriptions in the SCSI specs, which include the header.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds the implementation of write_data for the emulated
command case. The first time through it asks for more data,
the second time it finishes the processing of the command.
MODE SELECT and MODE SELECT(10) can now be re-enabled, but they
will not do much.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The previous patch only separated the send_command callback.
Use different implementations also for read_data and write_data.
The latter is still unreachable, so it aborts for now.
read_data passes the data buffer that was prepared and completes
the command.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only checks for present medium were still done in scsi_send_command
for emulated commands. So move those to scsi_disk_emulate_command
and return different SCSIReqOps depending on the kind of command.
Checks for present medium can be done unconditionally for the
scsi_disk_dma_reqops case.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We want to use separate SCSIReqOps for emulated commands needing an
allocated buffer vs. those that are zerocopy when the HBA supports
S/G lists. Ensure that all of the former are in scsi_disk_emulate_command.
Commands that do not have any parameters are more similar to emulated
commands, so also move them, even if they do I/O.
Finally, MODE SELECT and MODE SELECT(10) are broken because we do not
yet support passing parameter data _to_ emulated commands, so disable
them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By making discard asynchronous, we can reuse all the error handling
code that is used for other commands.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds two new properties vendor and product to SCSI disks.
These options let the user customize the inquiry data returned by the
disk.
Signed-off-by: Yan Vugenfirer <yan@ravellosystems.com>
Signed-off-by: Dmitry Fleytman <dmitry.fleytman@ravellosystems.com>
[ Use vendor and product property names, avoid "if" statements. - PB ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi-block is a passthrough device and does not allow customization
of vendor, product, removable, DPOFUA, block size or any other piece of
information. Thus, drop DEFINE_SCSI_DISK_PROPERTIES() from the
list of qdev properties.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Simplify the code by checking against req->hba_private directly,
and asserting that it is non-NULL before a command is completed
or canceled.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
By first resetting the devices, lsi_soft_reset will find the queue
already cleared so there is no need to do that forcibly (which may also
leak SCSIRequests, and/or worse due to dangling references to the
lsi_request in the hba_private field).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
scsi_req_abort is for terminating a command with a non-zero status.
The ABORT task management function is invoked by scsi_req_cancel.
In fact, ABORTED_COMMAND is a sense key, not a SAM status code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
trace_megasas_dcmd_dump_frame() takes 9 arguments, which is
rather much. Plus the trace infrastructure doesn't support
it. As we can get the information via other means it's pointless
to have it in the driver, so rather use some proper trace
point here and remove the old one.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* stefanha/net:
remove unused QemuOpts parameter from net init functions
convert net_init_bridge() to NetClientOptions
convert net_init_tap() to NetClientOptions
convert net_init_vde() to NetClientOptions
convert net_init_socket() to NetClientOptions
convert net_init_slirp() to NetClientOptions
convert net_init_dump() to NetClientOptions
convert net_init_nic() to NetClientOptions
convert net_client_init() to OptsVisitor
hw, net: "net_client_type" -> "NetClientOptionsKind" (qapi-generated)
qapi schema: add Netdev types
qapi schema: remove trailing whitespace
qapi: introduce OptsVisitor
expose QemuOpt and QemuOpts struct definitions to interested parties
qapi: introduce "size" type
qapi: generate C types for fixed-width integers
qapi: add test case for deallocating traversal of incomplete structure
qapi: fix error propagation
MAINTAINERS: Replace net maintainer Mark McLoughlin with Stefan Hajnoczi
* stefanha/trivial-patches:
Fix some more Qemus in documentation and help text
qdev: Fix Open Firmware comment
cpus.c: Make all_cpu_threads_idle() static
Use macro QEMU_PACKED for new packed structures
Recognize PCID feature
powerpc pci: fixed packing of ranges[]
Commit 0d936928ef removed code,
but left the related comment at a location where it no longer
belongs to.
The patch moves the comment to the correct callback and improves the text.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Since commit 541dc0d47f,
some new packed structures were added without using QEMU_PACKED.
QEMU_PACKED is needed for compilations with MinGW.
For other platforms nothing changes.
The code was fixed using this command:
git grep -la '__attribute__ ((packed))'|xargs perl -pi -e 's/__attribute__ \(\(packed\)\)/QEMU_PACKED/'
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
By default mingw-gcc is trying to pack structures the way to
preserve binary compatibility with MS Visual C what leads to
incorrect and unexpected padding in the PCI bus ranges property of
the sPAPR PHB.
The patch replaces __attribute__((packed)) with more strict QEMU_PACKED
which actually is __attribute__((gcc_struct, packed)) on Windows.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Now that we have LPAE support and can handle passing 64 bit
RAM sizes to Linux via the device tree, we can lift the
restriction in the Versatile Express A15 daughterboard model
on not having more than 2GB of RAM. Allow up to 30GB, which
is the maximum that can fit in the address map before running
into the (unmodelled) aliases of the first 2GB.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Support the case where the device tree blob specifies that
#address-cells and #size-cells are greater than 1. (This
is needed for device trees which can handle 64 bit physical
addresses and thus total RAM sizes over 4GB.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
The legacy ATAGS format for passing information to the kernel only
allows RAM sizes which fit in 32 bits; enforce this restriction
rather than silently doing something weird.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Clean up the mix of getting the RAM size from the global ram_size
and from the ram_size field in the arm_boot_info structure, so
that we always use the structure field.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Make the RAM size in arm_boot_info a uint64_t so it can express
the larger RAM sizes that may be seen in LPAE systems.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Add a missing guard that meant we would segfault if the guest read
UARTDR on a PL011 serial device which had no chr backend connected.
(This didn't happen for Linux guests because Linux reads the flags
register and doesn't try to read the UART if it's empty.)
Reported-by: Christian Müller <christian.mueller@heig-vd.ch>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Added (msi|msix)_set_message() function for whoever might
want to use them.
Currently msi_notify()/msix_notify() write to these vectors to
signal the guest about an interrupt so the correct values have to
written there by the guest or QEMU.
For example, POWER guest never initializes MSI/MSIX vectors, instead
it uses RTAS hypercalls. So in order to support MSIX for virtio-pci on
POWER we have to initialize MSI/MSIX message from QEMU.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This per-device notifier shall be triggered by any interrupt router
along the path of a device's legacy interrupt signal on routing changes.
For simplicity reasons and as this is a slow path anyway, no further
details on the routing changes are provided. Instead, the callback is
expected to use pci_device_route_intx_to_irq to check the effect of the
change.
Will be used by KVM PCI device assignment and VFIO.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Device assigned on KVM needs to know the mode
(enabled/inverted/disabled) and the IRQ number that a given device
triggers in the attached interrupt controller.
Add a PCI IRQ path discovery function that walks from a given device to
the host bridge, and gets this information. For
this purpose, a host bridge callback function is introduced:
route_intx_to_irq. It is so far only implemented by the PIIX3, other
host bridges can be added later on as required.
Will be used for KVM PCI device assignment and VFIO.
Based on patch by Jan Kiszka, with minor tweaks.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* kwolf/for-anthony: (41 commits)
fdc-test: Clean up a bit
fdc-test: introduce test_relative_seek
fdc: fix relative seek
qemu-iotests: Valgrind support
coroutine-ucontext: Help valgrind understand coroutines
qemu-io: Fix memory leaks
hw/block-common: Factor out fall back to legacy -drive cyls=...
blockdev: Don't limit DriveInfo serial to 20 characters
hw/block-common: Factor out fall back to legacy -drive serial=...
hw/block-common: Move BlockConf & friends from block.h
Relax IDE CHS limits from 16383,16,63 to 65535,16,255
blockdev: Drop redundant CHS validation for if=ide
hd-geometry: Compute BIOS CHS translation in one place
qtest: Test we don't put hard disk info into CMOS for a CD-ROM
ide pc: Put hard disk info into CMOS only for hard disks
block: Geometry and translation hints are now useless, purge them
qtest: Cover qdev property for BIOS CHS translation
ide: qdev property for BIOS CHS translation
qdev: New property type chs-translation
qdev: Collect private helpers in one place
...
* qemu-kvm/uq/master:
virtio: move common irqfd handling out of virtio-pci
virtio: move common ioeventfd handling out of virtio-pci
event_notifier: add event_notifier_set_handler
memory: pass EventNotifier, not eventfd
ivshmem: wrap ivshmem_del_eventfd loops with transaction
ivshmem: use EventNotifier and memory API
event_notifier: add event_notifier_init_fd
event_notifier: remove event_notifier_test
event_notifier: add event_notifier_set
apic: Defer interrupt updates to VCPU thread
apic: Reevaluate pending interrupts on LVT_LINT0 changes
apic: Resolve potential endless loop around apic_update_irq
kvm: expose tsc deadline timer feature to guest
kvm_pv_eoi: add flag support
kvm: Don't abort on kvm_irqchip_add_msi_route()
qdev_prop_set_string uses object_property_set_str, which takes
a const char * for the value. Lets propagate the constness
into qdev_prop_set_string.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
All current users (IDE, SCSI and virtio-blk) happen to share this 20
characters limit. Still, it should be left to device models. They
already enforce their limits. They have to, as the DriveInfo limit
only affects legacy -drive serial=..., not the qdev properties.
usb-storage, which doesn't limit serial number length, also uses
DriveInfo for -usbdevice. But that doesn't provide access to
DriveInfo serial.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This stuff doesn't belong to block layer, and was put there only
because a better home didn't exist then. Now it does.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
New limits straight from ATA4 6.2 Register delivered data transfer
command sector addressing.
I figure the old sector limit 63 was blindly copied from the BIOS
int 13 limit. Doesn't apply to the hardware. No idea where the old
cylinder limit comes from.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently, it is split between hd_geometry_guess() and
pc_cmos_init_late(). Confusing. info qtree shows the result of the
former. Also confusing.
Fold the part done in pc_cmos_init_late() into hd_geometry_guess().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In particular, don't set disk type and geometry when a CD-ROM on bus
ide.0 has media during CMOS initialization.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There are two producers of these hints: drive_init() on behalf of
-drive, and hd_geometry_guess().
The only consumer of the hint is hd_geometry_guess().
The callers of hd_geometry_guess() call it only when drive_init()
didn't set the hints. Therefore, drive_init()'s hints are never used.
Thus, hd_geometry_guess() only ever sees hints it produced itself in a
prior call. Only the first call computes something, subsequent calls
just repeat the first call's results. However, hd_geometry_guess() is
never called more than once: the device models don't, and the block
device is destroyed on unplug. Thus, dropping the repeat feature
doesn't break anything now.
If a block device wasn't destroyed on unplug and could be reused with
a new device, then repeating old results would be wrong. Thus,
dropping the repeat feature prevents future breakage.
This renders the hints unused. Purge them from the block layer.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This isn't quite orthodox. CHS translation is firmware configuration,
communicated via the RTC's CMOS RAM, not a property of the disk. But
it's best to treat it just like geometry anyway.
Maintain backward compatibility exactly like for geometry: fall back
to DriveInfo's translation, set with -drive trans=...
Bonus: info qtree now shows the translation. Except when it shows
"auto": that's resolved by pc_cmos_init_late(). To be addressed
shortly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just code motion, with one long line wrapped to keep checkpatch.pl
happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Geometry needs to be qdev properties, because it belongs to the
disk's guest part.
Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...
Do this only for ide-hd. ide-drive is legacy. ide-cd doesn't have a
geometry.
Bonus: info qtree now shows the geometry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Geometry needs to be qdev properties, because it belongs to the
disk's guest part.
Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...
Bonus: info qtree now shows the geometry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Geometry needs to be qdev properties, because it belongs to the
disk's guest part.
Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...
Do this only for scsi-hd. scsi-disk is legacy. scsi-cd doesn't have
a geometry. scsi-block should get geometry from the host disk.
Bonus: info qtree now shows the geometry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Best to use the same type, to avoid unwanted truncation or sign
extension.
BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
PC BIOS setup needs IDE geometry information. Get it directly from
the device model rather than through the block layer. In preparation
of purging geometry from the block layer, which will happen later in
this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hd_geometry_guess() picks geometry and translation. Callers can get
the geometry directly, via parameters, but for translation they need
to go through the block layer.
Add a parameter for translation, so it can optionally be gotten just
like geometry. In preparation of purging translation from the block
layer, which will happen later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When hd_geometry_guess() picks a geometry, it also picks the
appropriate translation, but only when the prior translation hint is
BIOS_ATA_TRANSLATION_AUTO. Looks wrong, because such a prior
translation would be passed to the BIOS whether it's suitable for the
geometry or not.
Fortunately, that can't happen. There are just two ways for the
translation hint to get set to something other than
BIOS_ATA_TRANSLATION_AUTO: drive_init() on behalf of -drive trans=...,
and hd_geometry_guess(). Both set it only when they also set a valid
geometry hint, i.e. one with a non-zero number of cylinders.
Since hd_geometry_guess() returns right away when it finds a valid
geometry hint, translation can only be BIOS_ATA_TRANSLATION_AUTO in
the remainder of the function.
Assert this, and simplify accordingly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into block.c. Device-specific functionality should
be kept in device code, not the block layer. Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 5bbdbb46 moved it to block.c because "other geometry guessing
functions already reside in block.c". Device-specific functionality
should be kept in device code, not the block layer. Move it back.
Disk geometry guessing is still in block.c. To be moved out in a
later patch series.
Bonus: the floppy type used in pc_cmos_init() now obviously matches
the one in the FDrive. Before, we relied on
bdrv_get_floppy_geometry_hint() picking the same type both in
fd_revalidate() and in pc_cmos_init().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Let the text cursor blink at 1.875 Hz, the original VGA cursor
frequency. No timer is used, instead we rely on the fact that the
display is updated periodically.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Switch a format string from %x to TARGET_PRIxPHYS so that it will
continue to work even if target_phys_addr_t is changed
to 64 bits in the future.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Use the new TARGET_PRIxPHYS macro to avoid the need to define an
OMAP_FMT_plx macro whose expansion depends directly on
TARGET_PHYS_ADDR_BITS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The PCI version is supported in lots of Operating Systems,
and has been successfully tested on:
- MS DOS 6.22 (using DC390 driver)
- MS Windows 3.11 (using DC390 driver)
- MS Windows 98 SE (using default driver)
- MS Windows NT 3.1 (using DC390 driver)
- MS Windows NT 4.0 (using default driver)
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The same mechanism is already in place for some select commands.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Suggested by blue swirl. Patch is on top of Paolo's
scsi-next tree.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Move down the expire time calculation down in the frame timer, to the
point where the timer is actually reloaded. This way we'll notice any
async_stepdown changes (especially resetting to 0 due to usb activity).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With the async schedule being kicked from other places than the frame
timer (commit 0f588df8b3) it may happen
that we call ehci_commit_interrupt() more than once per frame.
Move the call from the async schedule handler to the frame timer to
restore old irq behavior, which is more correct. Fixes regressions
with some linux kernel versions.
TODO: implement full Interrupt Threshold Control support.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
$subject says all: when loading old (v1) vmstate which doesn't contain
expire_time initialize it with a reasonable default (current time).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
$subject says all. First cut.
It's a pure UAS (usb attached scsi) emulation, without BOT (bulk-only
transport) compatibility. If your guest can't handle it use usb-storage
instead.
The emulation works like any other scsi hba emulation (eps, lsi, virtio,
megasas, ...). It provides just the HBA where you can attach scsi
devices as you like using '-device'. A single scsi target with up to
256 luns is supported.
For now only usb 2.0 transport is supported. This will change in the
future though as I plan to use this as playground when codeing up &
testing usb 3.0 transport and streams support in the qemu usb core and
the xhci emulation.
No migration support yet. I'm planning to add usb 3.0 support first as
this probably requires saving additional state.
Special thanks go to Paolo for bringing the qemu scsi emulation into
shape, so this can be added nicely without having to touch a single line
of scsi code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All transports can use the same event handler for the irqfd, though the
exact mechanics of the assignment will be specific. Note that there
are three states: handled by the kernel, handled in userspace, disabled.
This also lets virtio use event_notifier_set_handler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
All transports can use the same event handler for the ioeventfd, though
the exact setup (address/memory region) will be specific.
This lets virtio use event_notifier_set_handler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Under Win32, EventNotifiers will not have event_notifier_get_fd, so we
cannot call it in common code such as hw/virtio-pci.c. Pass a pointer to
the notifier, and only retrieve the file descriptor in kvm-specific code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
All of ivshmem's usage of eventfd now has a corresponding API in
EventNotifier. Simplify the code by using it, and also use the
memory API consistently to set up and tear down the ioeventfds.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add a missing cast to avoid gcc complaining about format string
errors when printing an expression based on a target_phys_addr_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Chubb <peter.chubb@nicta.com.au>
Most device models have a simple lifecycle for the hba_private field
and they can free it when a request is completed or cancelled.
However, in some cases it may be simpler to tie the lifetime
of hba_private to that of the included SCSIRequest. This patch
adds a free_request callback to SCSIBusInfo that lets an HBA
device model do exactly that.
Normally, device models use req->hba_private == NULL to flag requests
that have been completed already. Device models that use free_request
will still need to track this using a flag. This is the reason why
"converting" existing HBAs to use free_request adds complexity and
makes little sense. It is simply an additional convenience that is
provided by the SCSI layer. USB-attached storage will be the first
user.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
KVM performs TPR raising asynchronously to QEMU, specifically outside
QEMU's global lock. When an interrupt is injected into the APIC and TPR
is checked to decide if this can be delivered, a stale TPR value may be
used, causing spurious interrupts in the end.
Fix this by deferring apic_update_irq to the context of the target VCPU.
We introduce a new interrupt flag for this, CPU_INTERRUPT_POLL. When it
is set, the VCPU calls apic_poll_irq before checking for further pending
interrupts. To avoid special-casing KVM, we also implement this logic
for TCG mode.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When the guest modifies the LVT_LINT0 register, we need to check if some
pending PIC interrupt can now be delivered.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Commit d96e173769 refactored the reinjection of pending PIC interrupts.
However, it missed the potential loop of apic_update_irq ->
apic_deliver_pic_intr -> apic_local_deliver -> apic_set_irq ->
apic_update_irq that /could/ occur if LINT0 is injected as APIC_DM_FIXED
and that vector is currently blocked via TPR.
Resolve this by reinjecting only where it matters: inside
apic_get_interrupt. This function may clear a vector while a
PIC-originated reason still exists.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kwolf/for-anthony: (24 commits)
block: Factor bdrv_read_unthrottled() out of guess_disk_lchs()
qtest: Tidy up temporary files properly
fdc: Drop broken code for user-defined floppy geometry
fdc_test: introduce test_sense_interrupt
fdc_test: update media_change test
fdc: fix interrupt handling
fdc: rewrite seek and DSKCHG bit handling
block: introduce bdrv_swap, implement bdrv_append on top of it
block: copy over job and dirty bitmap fields in bdrv_append
raw: hook into blkdebug
blkdebug: optionally tie errors to a specific sector
blkdebug: store list of active rules
blkdebug: pass getlength to underlying file
blkdebug: tiny cleanup
blkdebug: remove sync i/o events
sheepdog: traverse pending_list from the first for each time
sheepdog: split outstanding list into inflight and pending
sheepdog: make sure we don't free aiocb before sending all requests
sheepdog: use coroutine based socket functions in coroutine context
sheepdog: restart I/O when socket becomes ready in do_co_req()
...
* kraxel/usb.55:
usb-host: add trace events for iso xfers
usb: fix interface initialization
usb: split endpoint init and reset
usb-redir: Correctly handle the usb_redir_babble usbredir status
ehci: Kick async schedule on wakeup in the non companion case
usb-ehci: Fix an assert whenever isoc transfers are used
ehci: don't flush cache on doorbell rings.
ehci: fix td writeback
ehci: fix ehci_qh_do_overlay
* bonzini/scsi-next:
scsi: Fix transfer length for READ POSITION commands.
scsi: Add basic support for SCSI media changer commands.
scsi: Ensure command and transfer lengths are set for all SCSI devices
scsi: Fix LOAD_UNLOAD
scsi: Fix data length == SCSI_SENSE_BUF_SIZE
virtio-scsi: do not crash on adding buffers to the event queue
megasas: LSI Megaraid SAS HBA emulation
megasas: Add header file
ISCSI: force use of sg for SMC and SSC devices
ISCSI: Add SCSI passthrough via scsi-generic to libiscsi
scsi-disk: implement READ DISC INFORMATION
atapi: implement READ DISC INFORMATION
scsi: add a qdev property for the disk's WWN
scsi: simplify handling of the VPD page length field
bdrv_get_floppy_geometry_hint() fails to store through its parameter
drive when bs has a geometry hint. Makes fd_revalidate() assign
random crap to drv->drive.
Has been broken that way for ages. Harmless, because:
* The only way to set a geometry hint is -drive if=none,cyls=...
Since commit c219331e, probably unintentional.
* The only use of drv->drive is as argument to another
bdrv_get_floppy_geometry_hint(). Which doesn't use it, since the
geometry hint is still there.
Drop the broken code, ignore -drive parameter cyls, heads and secs for
floppies even with if=none, just like before commit c219331e. Matches
-help, which explains cyls, heads, secs as "hard disk physical
geometry".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If you call the SENSE INTERRUPT STATUS command while there is no interrupt
waiting you get as result unknown command.
Fixed status0 register handling for read/write/format commands.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This bit is cleared on every successful seek to a different track (cylinder).
The seek is also called on revalidate or on read/write/format commands which
also clear the DSKCHG bit.
Signed-off-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
