Commit Graph

336 Commits

Author SHA1 Message Date
Daniel P. Berrangé
5994dcb8d8 ui, monitor: remove deprecated VNC ACL option and HMP commands
The VNC ACL concept has been replaced by the pluggable "authz" framework
which does not use monitor commands.

Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18 09:22:55 +00:00
Mahmoud Mandour
a8e2ab5db2 monitor: Replaced qemu_mutex_lock calls with QEMU_LOCK_GUARD
Removed various qemu_mutex_lock and their respective qemu_mutex_unlock
calls and used lock guard macros (QEMU_LOCK_GUARD and
WITH_QEMU_LOCK_GUARD). This simplifies the code by
eliminating qemu_mutex_unlock calls.

Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210311031538.5325-6-ma.mandourr@gmail.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-15 20:01:55 +00:00
Kevin Wolf
b248e61652 monitor/qmp: Stop processing requests when shutdown is requested
Before this patch, monitor_qmp_dispatcher_co() used to check whether
shutdown is requested only when it would have to wait for new requests.
If there were still some queued requests, it would try to execute all of
them before shutting down.

This can be surprising when the queued QMP commands take long or hang
because Ctrl-C may not actually exit QEMU as soon as possible.

Change monitor_qmp_dispatcher_co() so that it additionally checks
whether shutdown is request before it gets a new request from the queue.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210212172028.288825-3-kwolf@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-02-15 15:10:14 +01:00
Kevin Wolf
c81219a7dd monitor: Fix assertion failure on shutdown
Commit 357bda95 already tried to fix the order in monitor_cleanup() by
moving shutdown of the dispatcher coroutine further to the start.
However, it didn't go far enough:

iothread_stop() makes sure that all pending work (bottom halves) in the
AioContext of the monitor iothread is completed. iothread_destroy()
depends on this and fails an assertion if there is still a pending BH.

While the dispatcher coroutine is running, it will try to resume the
monitor after taking a request out of the queue, which involves a BH.
The dispatcher is run until it terminates in the AIO_WAIT_WHILE() loop.
However, adding new BHs between iothread_stop() and iothread_destroy()
is forbidden.

Fix this by stopping the dispatcher first before shutting down the other
parts of the monitor. This means we can now receive requests that aren't
handled any more when QEMU is shutting down, but this is unlikely to be
a problem for QMP clients.

Fixes: 357bda9590
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210212172028.288825-2-kwolf@redhat.com>
Tested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2021-02-15 15:10:14 +01:00
Daniel P. Berrangé
bef7e9e2c7 migration: introduce a delete_snapshot wrapper
Make snapshot deletion consistent with the snapshot save
and load commands by using a wrapper around the blockdev
layer. The main difference is that we get upfront validation
of the passed in device list (if any).

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-10-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé
f1a9fcdd01 migration: wire up support for snapshot device selection
Modify load_snapshot/save_snapshot to accept the device list and vmstate
node name parameters previously added to the block layer.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-9-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé
f781f84189 migration: control whether snapshots are ovewritten
The traditional HMP "savevm" command will overwrite an existing snapshot
if it already exists with the requested name. This new flag allows this
to be controlled allowing for safer behaviour with a future QMP command.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-8-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé
cf3a74c94f block: add ability to specify list of blockdevs during snapshot
When running snapshot operations, there are various rules for which
blockdevs are included/excluded. While this provides reasonable default
behaviour, there are scenarios that are not well handled by the default
logic. Some of the conditions do not have a single correct answer.

Thus there needs to be a way for the mgmt app to provide an explicit
list of blockdevs to perform snapshots across. This can be achieved
by passing a list of node names that should be used.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210204124834.774401-5-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé
f61fe11aa6 migration: stop returning errno from load_snapshot()
None of the callers care about the errno value since there is a full
Error object populated. This gives consistency with save_snapshot()
which already just returns a boolean value.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Return false/true instead of -1/0, document function]
Acked-by: Pavel Dovgalyuk <pavel.dovgalyuk@ispras.ru>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-4-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Daniel P. Berrangé
e26f98e209 block: push error reporting into bdrv_all_*_snapshot functions
The bdrv_all_*_snapshot functions return a BlockDriverState pointer
for the invalid backend, which the callers then use to report an
error message. In some cases multiple callers are reporting the
same error message, but with slightly different text. In the future
there will be more error scenarios for some of these methods, which
will benefit from fine grained error message reporting. So it is
helpful to push error reporting down a level.

Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
[PMD: Initialize variables]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210204124834.774401-2-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Dr. David Alan Gilbert
a64aec725e migration: Display the migration blockers
Update 'info migrate' to display migration blocking information.
If the outbound migration is not blocked, there is no change, however
if it is blocked a message is displayed with a list of reasons why,
e.g.

qemu-system-x86_64 -nographic  -smp 4 -m 4G -M pc,usb=on \
 -chardev null,id=n -device usb-serial,chardev=n \
 -virtfs local,path=/home,mount_tag=fs,security_model=none \
 -drive if=virtio,file=myimage.qcow2

(qemu) info migrate
globals:
store-global-state: on
only-migratable: off
send-configuration: on
send-section-footer: on
decompress-error-check: on
clear-bitmap-shift: 18
Outgoing migration blocked:
  Migration is disabled when VirtFS export path '/home' is mounted in the guest using mount_tag 'fs'
  non-migratable device: 0000:00:01.2/1/usb-serial

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202135522.127380-3-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Markus Armbruster
ec17de0ac0 migration: Fix migrate-set-parameters argument validation
Commit 741d4086c8 "migration: Use proper types in json" (v2.12.0)
switched MigrationParameters to narrower integer types, and removed
the simplified qmp_migrate_set_parameters()'s argument checking
accordingly.

Good idea, except qmp_migrate_set_parameters() takes
MigrateSetParameters, not MigrationParameters.  Its job is updating
migrate_get_current()->parameters (which *is* of type
MigrationParameters) according to its argument.  The integers now get
truncated silently.  Reproducer:

    ---> {'execute': 'query-migrate-parameters'}
    <--- {"return": {[...] "compress-threads": 8, [...]}}
    ---> {"execute": "migrate-set-parameters", "arguments": {"compress-threads": 257}}
    <--- {"return": {}}
    ---> {'execute': 'query-migrate-parameters'}
    <--- {"return": {[...] "compress-threads": 1, [...]}}

Fix by resynchronizing MigrateSetParameters with MigrationParameters.

Fixes: 741d4086c8
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210202141734.2488076-2-armbru@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-02-08 11:19:51 +00:00
Markus Armbruster
88daf0996c qmp: Resume OOB-enabled monitor before processing the request
monitor_qmp_dispatcher_co() needs to resume the monitor if
handle_qmp_command() suspended it.  Two cases:

1. OOB enabled: suspended if mon->qmp_requests has no more space

2. OOB disabled: suspended always

We resume only after we processed the request.  Which can take a long
time.

Resume the monitor right when the queue has space to keep the monitor
available for out-of-band commands even in this corner case.

Leave the "OOB disabled" case alone.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210201161504.1976989-4-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
[Trailing whitespace tidied up]
2021-02-04 13:20:29 +01:00
Markus Armbruster
f680405f45 qmp: Add more tracepoints
Add tracepoints for in-band request enqueue and dequeue, processing of
queued in-band errors, and responses.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210201161504.1976989-3-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2021-02-04 13:20:29 +01:00
Markus Armbruster
395a95080a qmp: Fix up comments after commit 9ce44e2ce2
Commit 9ce44e2ce2 "qmp: Move dispatcher to a coroutine" replaced
monitor_qmp_bh_dispatcher() by monitor_qmp_dispatcher_co(), but
neglected to update comments.  Do that now.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210201161504.1976989-2-armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
2021-02-04 13:20:29 +01:00
Peter Maydell
fb246f0590 monitor/qmp-cmds.c: Don't include ui/vnc.h
The qmp-cmds.c file currently includes ui/vnc.h, which (being located
in the ui/ directory rather than include) is really supposed to be
for use only by the ui subsystem.  In fact the function prototypes we
need (vnc_display_password(), etc) are all declared in
include/ui/console.h, so we can switch to including that instead.

(ui/vnc.h includes include/ui/console.h, so this change strictly
reduces the quantity of headers qmp-cmds.c pulls in.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210104161200.15068-1-peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-02-04 13:20:28 +01:00
Eric Blake
95b3a8c8a8 qapi: More complex uses of QAPI_LIST_APPEND
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-28 08:08:45 +01:00
Eric Blake
c3033fd372 qapi: Use QAPI_LIST_APPEND in trivial cases
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list.  While at it, consistently use
the variable name 'tail' for that purpose.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-28 08:08:45 +01:00
Eric Blake
240ee8bd31 qapi: A couple more QAPI_LIST_PREPEND() stragglers
Commit 54aa3de72e switched multiple sites to use QAPI_LIST_PREPEND
instead of open-coding, but missed a couple of spots.

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210113221013.390592-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-01-28 08:08:45 +01:00
Paolo Bonzini
0afec75734 qmp: remove deprecated "change" command
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210120144235.345983-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-23 15:55:07 -05:00
Paolo Bonzini
cfb5387a1d hmp: remove "change vnc TARGET" command
The HMP command \"change vnc TARGET\" is messy:

- it takes an ugly shortcut to determine if the option has an "id",
with incorrect results if "id=" is not preceded by an unescaped
comma.

- it deletes the existing QemuOpts and does not try to rollback
if the parsing fails (which is not causing problems, but only due to
how VNC options are parsed)

- because it uses the same parsing function as "-vnc", it forces
the latter to not support "-vnc help".

On top of this, it uses a deprecated QMP command, thus getting in
the way of removing the QMP command.  Since the usecase for the
command is not clear, just remove it and send "change vnc password"
directly to the QMP "change-vnc-password" command.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20210120144235.345983-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-23 15:55:07 -05:00
Peter Maydell
729cc68373 Remove superfluous timer_del() calls
This commit is the result of running the timer-del-timer-free.cocci
script on the whole source tree.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20201215154107.3255-4-peter.maydell@linaro.org
2021-01-08 15:13:38 +00:00
Paolo Bonzini
3b9bd3f46b remove TCG includes from common code
Enable removing tcg/$tcg_arch from the include path when TCG is disabled.
Move translate-all.h to include/exec, since stubs exist for the functions
defined therein.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-02 21:03:36 +01:00
Peter Maydell
1f7c02797f QAPI patches patches for 2020-12-19
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl/dynUSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZT3igP/3bWwsKR5vKVsDUTmMfrhcgaFvQiaYoG
 F29Bond8Xy0Zd0gl7OWh/5jKL0vGlrEVPrKfYLUjMnfkeRec/pOkIB2oOmIxpnPs
 9zi4kh2hQ3dEoRBuvSnnZzedetYPTuCpWMIjlztkgfxgcimqm8TPNVSxRaSApjC3
 Y8108wGwBWVf2C0rhKO9E2xA51uo6khy05i1psUtqUlC+PuDQ/OwzQHM2dnWdDB6
 kUwBDK17nhL6WwsYqCyKLSiDModReYfDiY8GS5MDLo74dzwXiatEefCR7+sbM4xq
 eX/SBoqoeS1jLPNuCryNeGNKvNA2KAbEJTnbQA2NxBXHgZ9/1SxVZFxuPp4nDMSQ
 N7BDuDI8YtJE479RjT/ZzRG65xadGBSe/HXkXM9mZwh1zitop8SVZ9fArFBHvNzw
 Y5zAv3fQd54+87psffg4dYFK0wGmqTabLEEuVzM8KIVqcAdYA2yC2b2EHy+vsxuq
 GMkr0WaA6Sq2gthXmzdTjmUPuHdan/NIhuV6d66SbPNH2oH31piptFxuznyFWSKV
 isciFFdUrkg5QrF8DSt2nmdwMFf8QGbszqP8QIGMzhJCCS9GXIiGG8f149++q8X8
 HO1lFAdLQJdrDwCYmfx36tOvi2rS/rcoTGgvg66UX3xKko1ruoxR1ZWcS54obJN6
 vEQDZ+PxubDg
 =vGLy
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-12-19' into staging

QAPI patches patches for 2020-12-19

# gpg: Signature made Sat 19 Dec 2020 09:40:05 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-12-19: (33 commits)
  qobject: Make QString immutable
  block: Use GString instead of QString to build filenames
  keyval: Use GString to accumulate value strings
  json: Use GString instead of QString to accumulate strings
  migration: Replace migration's JSON writer by the general one
  qobject: Factor JSON writer out of qobject_to_json()
  qobject: Factor quoted_str() out of to_json()
  qobject: Drop qstring_get_try_str()
  qobject: Drop qobject_get_try_str()
  Revert "qobject: let object_property_get_str() use new API"
  block: Avoid qobject_get_try_str()
  qmp: Fix tracing of non-string command IDs
  qobject: Move internals to qobject-internal.h
  hw/rdma: Replace QList by GQueue
  Revert "qstring: add qstring_free()"
  qobject: Change qobject_to_json()'s value to GString
  qobject: Use GString instead of QString to accumulate JSON
  qobject: Make qobject_to_json_pretty() take a pretty argument
  monitor: Use GString instead of QString for output buffer
  hmp: Simplify how qmp_human_monitor_command() gets output
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-01-01 14:33:03 +00:00
Markus Armbruster
d403d92dfc qmp: Fix tracing of non-string command IDs
Tracepoints monitor_qmp_cmd_in_band and
monitor_qmp_cmd_out_of_band (commit cf869d5317 "qmp: support
out-of-band (oob) execution") treat non-string "id" like absent "id".
Fix that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-10-armbru@redhat.com>
2020-12-19 10:38:43 +01:00
Markus Armbruster
eab3a4678b qobject: Change qobject_to_json()'s value to GString
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString.  Just one of the callers actually needs a
QString: qemu_rbd_parse_filename().  A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds().  The remainder just need a string.

Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.

qemu_rbd_parse_filename() now has to convert to QString.  All others
save a QString temporary.  to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
2020-12-19 10:38:43 +01:00
Markus Armbruster
6589f45991 qobject: Make qobject_to_json_pretty() take a pretty argument
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-4-armbru@redhat.com>
2020-12-19 10:38:43 +01:00
Markus Armbruster
20076f4a8c monitor: Use GString instead of QString for output buffer
GString has a richer set of string operations than QString.  It should
be preferred to QString except where we need a QObject or reference
counting.  We don't here.  Switch to GString, and put its richer
interface to use.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-3-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-19 10:38:35 +01:00
Markus Armbruster
436054e22f hmp: Simplify how qmp_human_monitor_command() gets output
Commit 48c043d0d1 "hmp: human-monitor-command: stop using the Memory
chardev driver" left us "if string is non-empty, duplicate it, else
duplicate the empty string".  Meh.  Duplicate it unconditionally.

Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-2-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-19 10:38:19 +01:00
Eric Blake
54aa3de72e qapi: Use QAPI_LIST_PREPEND() where possible
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND().  But places where we must keep the list in order
by appending remain open-coded until later patches.

Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
 new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).

Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved.  Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-12-19 10:20:14 +01:00
Yutao Ai
33b1fa9485 monitor:Don't use '#' flag of printf format ('%#') in format strings
Delete '#' and use '0x' prefix instead

Signed-off-by: Yutao Ai <aiyutao@huawei.com>
Message-Id: <20201125014514.55562-4-aiyutao@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Yutao Ai
89854b9558 monitor:braces {} are necessary for all arms of this statement
Fix the errors by add {}

Signed-off-by: Yutao Ai <aiyutao@huawei.com>
Message-Id: <20201125014514.55562-3-aiyutao@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Yutao Ai
d22b854dc5 monitor:open brace '{' following struct go on the same line
Move the open brace '{' following struct go on the same line

Signed-off-by: Yutao Ai <aiyutao@huawei.com>
Message-Id: <20201125014514.55562-2-aiyutao@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-12-18 10:08:24 +00:00
Alejandro Jimenez
e6dba04813 qmp: generalize watchdog-set-action to -no-reboot/-no-shutdown
Add a QMP command to allow for the behaviors specified by the
-no-reboot and -no-shutdown command line option to be set at runtime.
The new command is named set-action and takes optional arguments, named
after an event, that provide a corresponding action to take.

Example:

-> { "execute": "set-action",
     "arguments": {
	"reboot": "none",
	"shutdown": "poweroff",
	"watchdog": "debug" } }
<- { "return": {} }

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Message-Id: <1607705564-26264-4-git-send-email-alejandro.j.jimenez@oracle.com>
[Split the series differently, with -action based on the QMP command. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:57 -05:00
Paolo Bonzini
2f181fbd5a machine: introduce MachineInitPhase
Generalize the qdev_hotplug variable to the different phases of
machine initialization.  We would like to allow different
monitor commands depending on the phase.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:52 -05:00
Paolo Bonzini
b4e1a34211 vl: remove separate preconfig main_loop
Move post-preconfig initialization to the x-exit-preconfig.  If preconfig
is not requested, just exit preconfig mode immediately with the QMP
command.

As a result, the preconfig loop will run with accel_setup_post
and os_setup_post restrictions (xen_restrict, chroot, etc.)
already done.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:49 -05:00
Paolo Bonzini
164dafd174 remove preconfig state
The preconfig state is only used if -incoming is not specified, which
makes the RunState state machine more tricky than it need be.  However
there is already an equivalent condition which works even with -incoming,
namely qdev_hotplug.  Use it instead of a separate runstate.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-15 12:51:48 -05:00
Peter Maydell
b785d25e91 * Fix for NULL segments (Bin Meng)
* Support for 32768 CPUs on x86 without IOMMU (David)
 * PDEP/PEXT fix and testcase (myself)
 * Remove bios_name and ram_size globals (myself)
 * qemu_init rationalization (myself)
 * Update kernel-doc (myself + upstream patches)
 * Propagate MemTxResult across DMA and PCI functions (Philippe)
 * Remove master/slave when applicable (Philippe)
 * WHPX support for in-kernel irqchip (Sunil)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl/SWS4UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMHLAf8Cr1nOn1ou2S2H9vePeoqRAVGdQBv
 tbQ/nZs+2NZMyhLF7mBj7y6Ym0wNyXzkyiFnN1wR04V5e0tF+q1Y0OOZtihJ+Ntk
 esjzHAzdqS22xI2dNnNDBo69eQQKDq3C0Ug5x6z63tO81AoTNKP+vq+QbZqe7v7K
 2TScroAnhX9zE5Hz1+qJ35w13EMCNFnUPHNcOwxVSGHj4HNoEpIjjcE6rme46jX+
 REsEGKJKIJ88aV2hzOLSrdJ0/mNuWsjfOvcfgtoIYUPbb55hHMykqD+LapoyEp8K
 gjnco6JT6wWFN1+tVxTjY4TaERVw+NGomd2QyHSbanDoRd8igFhxu2gBnQ==
 =yeQi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging

* Fix for NULL segments (Bin Meng)
* Support for 32768 CPUs on x86 without IOMMU (David)
* PDEP/PEXT fix and testcase (myself)
* Remove bios_name and ram_size globals (myself)
* qemu_init rationalization (myself)
* Update kernel-doc (myself + upstream patches)
* Propagate MemTxResult across DMA and PCI functions (Philippe)
* Remove master/slave when applicable (Philippe)
* WHPX support for in-kernel irqchip (Sunil)

# gpg: Signature made Thu 10 Dec 2020 17:21:50 GMT
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini-gitlab/tags/for-upstream: (113 commits)
  scripts: kernel-doc: remove unnecessary change wrt Linux
  Revert "docs: temporarily disable the kernel-doc extension"
  scripts: kernel-doc: use :c:union when needed
  scripts: kernel-doc: split typedef complex regex
  scripts: kernel-doc: fix typedef parsing
  Revert "kernel-doc: Handle function typedefs that return pointers"
  Revert "kernel-doc: Handle function typedefs without asterisks"
  scripts: kernel-doc: try to use c:function if possible
  scripts: kernel-doc: fix line number handling
  scripts: kernel-doc: allow passing desired Sphinx C domain dialect
  scripts: kernel-doc: don't mangle with parameter list
  scripts: kernel-doc: fix typedef identification
  scripts: kernel-doc: reimplement -nofunction argument
  scripts: kernel-doc: fix troubles with line counts
  scripts: kernel-doc: use a less pedantic markup for funcs on Sphinx 3.x
  scripts: kernel-doc: make it more compatible with Sphinx 3.x
  Revert "kernel-doc: Use c:struct for Sphinx 3.0 and later"
  Revert "scripts/kerneldoc: For Sphinx 3 use c:macro for macros with arguments"
  scripts: kernel-doc: add support for typedef enum
  kernel-doc: add support for ____cacheline_aligned attribute
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-12-11 13:50:35 +00:00
Tobin Feldman-Fitzthum
c7f7e6970d sev: add sev-inject-launch-secret
AMD SEV allows a guest owner to inject a secret blob
into the memory of a virtual machine. The secret is
encrypted with the SEV Transport Encryption Key and
integrity is guaranteed with the Transport Integrity
Key. Although QEMU facilitates the injection of the
launch secret, it cannot access the secret.

Signed-off-by: Tobin Feldman-Fitzthum <tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Message-Id: <20201027170303.47550-1-tobin@linux.ibm.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2020-12-10 17:33:17 -05:00
Paolo Bonzini
4cd2927472 hmp: introduce cmd_available
Combine the RUN_STATE_PRECONFIG and cmd_can_preconfig checks
into a single function, to avoid repeating the same expression
(or its negation after applying DeMorgan's rule) over and
over again.

Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:15 -05:00
Paolo Bonzini
b326b6ea79 make ram_size local to vl.c
Use the machine properties for the leftovers too.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-12-10 12:15:10 -05:00
Markus Armbruster
99750d82e4 ui: Tweak a client_migrate_info error message
Change

    Parameter 'protocol' expects spice

to

    Parameter 'protocol' expects 'spice'

for consistency with similar error messages elsewhere.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-7-armbru@redhat.com>
2020-12-10 17:16:44 +01:00
Markus Armbruster
9e1b9c6c2d ui: Improve a client_migrate_info error message
client_migrate_info reports spice_server_migrate_connect() failure as
"An undefined error has occurred".  Improve to "Could not set up
display for migration".

QERR_UNDEFINED_ERROR is now unused.  Drop.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-6-armbru@redhat.com>
2020-12-10 17:16:44 +01:00
Markus Armbruster
9272186d3d ui: Improve some set_passwd, expire_password error messages
set_passwd and expire_password reject invalid "protocol" with "Invalid
parameter 'protocol'".  Misleading; the parameter is valid, its value
isn't.  Improve to "Parameter 'protocol' expects 'vnc' or 'spice'".

expire_password fails with "Could not set password".  Misleading;
improve to "Could not set password expire time".

QERR_SET_PASSWD_FAILED is now unused.  Drop.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-5-armbru@redhat.com>
2020-12-10 17:16:44 +01:00
Markus Armbruster
f820af8743 qerror: Eliminate QERR_ macros used in just one place
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-3-armbru@redhat.com>
2020-12-10 17:16:44 +01:00
Paolo Bonzini
ad6f932fe8 net: do not exit on "netdev_add help" monitor command
"netdev_add help" is causing QEMU to exit because the code that
invokes show_netdevs is shared between CLI and HMP processing.
Move the check to the callers so that exit(0) remains only
in the CLI flow.

"netdev_add help" is not fixed by this patch; that is left for
later work.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2020-11-24 10:40:17 +08:00
Kevin Wolf
e7cff9c68d hmp: Pass monitor to mon_get_cpu_env()
mon_get_cpu_env() is indirectly called monitor_parse_arguments() where
the current monitor isn't set yet. Instead of using monitor_cur_env(),
explicitly pass the Monitor pointer to the function.

Without this fix, an HMP command like "x $pc" crashes like this:

  #0  0x0000555555caa01f in mon_get_cpu_sync (mon=0x0, synchronize=true) at ../monitor/misc.c:270
  #1  0x0000555555caa141 in mon_get_cpu (mon=0x0) at ../monitor/misc.c:294
  #2  0x0000555555caa158 in mon_get_cpu_env () at ../monitor/misc.c:299
  #3  0x0000555555b19739 in monitor_get_pc (mon=0x555556ad2de0, md=0x5555565d2d40 <monitor_defs+1152>, val=0) at ../target/i386/monitor.c:607
  #4  0x0000555555cadbec in get_monitor_def (mon=0x555556ad2de0, pval=0x7fffffffc208, name=0x7fffffffc220 "pc") at ../monitor/misc.c:1681
  #5  0x000055555582ec4f in expr_unary (mon=0x555556ad2de0) at ../monitor/hmp.c:387
  #6  0x000055555582edbb in expr_prod (mon=0x555556ad2de0) at ../monitor/hmp.c:421
  #7  0x000055555582ee79 in expr_logic (mon=0x555556ad2de0) at ../monitor/hmp.c:455
  #8  0x000055555582eefe in expr_sum (mon=0x555556ad2de0) at ../monitor/hmp.c:484
  #9  0x000055555582efe8 in get_expr (mon=0x555556ad2de0, pval=0x7fffffffc418, pp=0x7fffffffc408) at ../monitor/hmp.c:511
  #10 0x000055555582fcd4 in monitor_parse_arguments (mon=0x555556ad2de0, endp=0x7fffffffc890, cmd=0x555556675b50 <hmp_cmds+7920>) at ../monitor/hmp.c:876
  #11 0x00005555558306a8 in handle_hmp_command (mon=0x555556ad2de0, cmdline=0x555556ada452 "$pc") at ../monitor/hmp.c:1087
  #12 0x000055555582df14 in monitor_command_cb (opaque=0x555556ad2de0, cmdline=0x555556ada450 "x $pc", readline_opaque=0x0) at ../monitor/hmp.c:47

After this fix, nothing is left in monitor_parse_arguments() that can
indirectly call monitor_cur(), so the fix is complete.

Fixes: ff04108a0e
Reported-by: lichun <lichun@ruijie.com.cn>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-4-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-13 12:45:51 +00:00
Kevin Wolf
43cf067ff8 hmp: Pass monitor to MonitorDef.get_value()
All of these callbacks use mon_get_cpu_env(). Pass the Monitor
pointer to them it in preparation for adding a monitor argument to
mon_get_cpu_env().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-3-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-13 12:45:43 +00:00
Kevin Wolf
2fc5d01bb4 hmp: Pass monitor to mon_get_cpu()
mon_get_cpu() is indirectly called monitor_parse_arguments() where
the current monitor isn't set yet. Instead of using monitor_cur(),
explicitly pass the Monitor pointer to the function.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201113114326.97663-2-kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-11-13 12:45:35 +00:00
Marc-André Lureau
0d9b90ce5c console: make QMP/HMP screendump run in coroutine
Thanks to the monitors' coroutine support (merge commit b7092cda1b),
the screendump handler can trigger a graphic_hw_update(), yield and let
the main loop run until update is done. Then the handler is resumed, and
ppm_save() will write the screen image to disk in the coroutine context.

The IO is still blocking though, as the file is set blocking so far,
this could be addressed by some future change (with other caveats).

Related to:
https://bugzilla.redhat.com/show_bug.cgi?id=1230527

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20201027133602.3038018-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-11-04 08:02:25 +01:00
Kirti Wankhede
3710586caa qapi: Add VFIO devices migration stats in Migration stats
Added amount of bytes transferred to the VM at destination by all VFIO
devices

Signed-off-by: Kirti Wankhede <kwankhede@nvidia.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-11-01 12:30:51 -07:00
Gerd Hoffmann
864a024c69 spice: move display_add_client() to QemuSpiceOps.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-8-kraxel@redhat.com
2020-10-21 15:46:14 +02:00
Gerd Hoffmann
08ad262643 spice: move auth functions to QemuSpiceOps.
Move qemu_spice_set_passwd() and qemu_spice_set_pw_expire() functions to
QemuSpiceOps.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-7-kraxel@redhat.com
2020-10-21 15:46:14 +02:00
Gerd Hoffmann
7477477ca7 spice: add QemuSpiceOps, move migrate_info
Add QemuSpiceOps struct.  This struct holds function pointers to the
spice functions.  It will be initialized with pointers to the stub
functions.  When spice gets initialized the function pointers will
be re-written to the real functions.

The spice stubs will move from qemu-spice.h to spice-module.c for that,
because they will be needed for both "CONFIG_SPICE=n" and "CONFIG_SPICE=y
but spice module not loaded" cases.

This patch adds the infrastructure and starts with moving
qemu_spice_migrate_info() to QemuSpiceOps.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20201019075224.14803-3-kraxel@redhat.com
2020-10-21 15:46:14 +02:00
Peter Maydell
7daf8f8d01 Block layer patches:
- qemu-storage-daemon: Remove QemuOpts from --object parser
 - monitor: Fix order in monitor_cleanup()
 - Deprecate the sheepdog block driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAl+IYSoRHGt3b2xmQHJl
 ZGhhdC5jb20ACgkQfwmycsiPL9YH0g//aXB91wIDBVvyRYddD7rv9tjr6nzlqqkE
 gsHGNiSDtNrNvmPyDl5JMF+xkki6mF4AKOwZYgDXaz/Rg/93DbR73yt3ZqdHUwOq
 hGSHJhdxyWJzLoL3di2ORQDrj414YLJlbVNUJMZnB7AGr/T0lHFwLbJr2dlBKONn
 uwaqoQ5fLnGY3szpQgJIZuHP//5aX3Zx1KyRSnlF93blRgKDJSD7NpEdIJyhFLd7
 qXcGPx75XsNPMCuxbAZFceMLUWsLh1//zuJU3dC4QS0lDjc+99oN7xiUT8DhlQAm
 nwSNaRoHdkVMtSFpJ/gmQzOFQbULXnAuLcdVXTWL31EGbINv64AjBrWByDJ0DsU5
 Q+zTmpf8m6BnQyTghE7LkxJFBfVdqRVG6ebZiMjuoyvUXRhBVCYGHv2qddVTLL5O
 5ixdArwgfXE0lRyF2Z2UUhZhAQO4YnHJxReRGwzSRCmM1kqzB5cSmNJylkbWYDh0
 aku3skXTPUBBE/bRpsIwB+lEEm8OaZSQQrHLdaHtUHM7qNFWmYbOdZOCQOG845QX
 sLq1Ghhtki6e2IZLPjOFOdm+p2cStLbfGExunkjhke9osTNfLNVSV8JNT0xORPAm
 CQCLn6EiEwpMEHbIn8AsSWRl1hbqCubxRHeeCSKmM7EtHd6mr/osRjeo8jdlK/Qb
 z7ztkatr7iU=
 =gBMn
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-storage-daemon: Remove QemuOpts from --object parser
- monitor: Fix order in monitor_cleanup()
- Deprecate the sheepdog block driver

# gpg: Signature made Thu 15 Oct 2020 15:48:10 BST
# gpg:                using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg:                issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream:
  block: deprecate the sheepdog block driver
  block: drop moderated sheepdog mailing list from MAINTAINERS file
  monitor: Fix order in monitor_cleanup()
  qemu-storage-daemon: Remove QemuOpts from --object parser
  qom: Add user_creatable_print_help_from_qdict()
  qom: Factor out helpers from user_creatable_print_help()
  keyval: Parse help options
  keyval: Fix parsing of ',' in value of implied key
  test-keyval: Demonstrate misparse of ',' with implied key
  keyval: Fix and clarify grammar

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-10-16 17:39:01 +01:00
Kevin Wolf
357bda9590 monitor: Fix order in monitor_cleanup()
We can only destroy Monitor objects after we're sure that they are not
in use by the dispatcher coroutine any more. This fixes crashes like the
following where we tried to destroy a monitor mutex while the dispatcher
coroutine still holds it:

 (gdb) bt
 #0  0x00007fe541cf4bc5 in raise () at /lib64/libc.so.6
 #1  0x00007fe541cdd8a4 in abort () at /lib64/libc.so.6
 #2  0x000055c24e965327 in error_exit (err=16, msg=0x55c24eead3a0 <__func__.33> "qemu_mutex_destroy") at ../util/qemu-thread-posix.c:37
 #3  0x000055c24e9654c3 in qemu_mutex_destroy (mutex=0x55c25133e0f0) at ../util/qemu-thread-posix.c:70
 #4  0x000055c24e7cfaf1 in monitor_data_destroy_qmp (mon=0x55c25133dfd0) at ../monitor/qmp.c:439
 #5  0x000055c24e7d23bc in monitor_data_destroy (mon=0x55c25133dfd0) at ../monitor/monitor.c:615
 #6  0x000055c24e7d253a in monitor_cleanup () at ../monitor/monitor.c:644
 #7  0x000055c24e6cb002 in qemu_cleanup () at ../softmmu/vl.c:4549
 #8  0x000055c24e0d259b in main (argc=24, argv=0x7ffff66b0d58, envp=0x7ffff66b0e20) at ../softmmu/main.c:51

Reported-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201013125027.41003-1-kwolf@redhat.com>
Tested-by: Ben Widawsky <ben.widawsky@intel.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-10-15 16:06:28 +02:00
Gerd Hoffmann
d72c34cccc meson: add spice_headers dependency.
Used for files which (with CONFIG_SPICE=y) depend on spice header files
to pick up some enum, but which do not depend on on the actual spice
shared library.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20201014121120.13482-6-kraxel@redhat.com
2020-10-15 11:14:40 +02:00
Kevin Wolf
bb4b9ead95 hmp: Add support for coroutine command handlers
Often, QMP command handlers are not only called to handle QMP commands,
but also from a corresponding HMP command handler. In order to give them
a consistent environment, optionally run HMP command handlers in a
coroutine, too.

The implementation is a lot simpler than in QMP because for HMP, we
still block the VM while the coroutine is running.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20201005155855.256490-11-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:20 +02:00
Kevin Wolf
9ce44e2ce2 qmp: Move dispatcher to a coroutine
This moves the QMP dispatcher to a coroutine and runs all QMP command
handlers that declare 'coroutine': true in coroutine context so they
can avoid blocking the main loop while doing I/O or waiting for other
events.

For commands that are not declared safe to run in a coroutine, the
dispatcher drops out of coroutine context by calling the QMP command
handler from a bottom half.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201005155855.256490-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:20 +02:00
Kevin Wolf
e69ee454b5 monitor: Make current monitor a per-coroutine property
This way, a monitor command handler will still be able to access the
current monitor, but when it yields, all other code code will correctly
get NULL from monitor_cur().

This uses a hash table to map the coroutine pointer to the current
monitor of that coroutine.  Outside of coroutine context, we associate
the current monitor with the leader coroutine of the current thread.

Approaches to implement some form of coroutine local storage directly in
the coroutine core code have been considered and discarded because they
didn't end up being much more generic than the hash table and their
performance impact on coroutines not using coroutine local storage was
unclear. As the block layer uses a coroutine per I/O request, this is a
fast path and we have to be careful. It's safest to just stay out of
this path with code only used by the monitor.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-8-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
41725fa7ed qmp: Call monitor_set_cur() only in qmp_dispatch()
The correct way to set the current monitor for a coroutine handler will
be different than for a blocking handler, so monitor_set_cur() needs to
be called in qmp_dispatch().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
57d3635e42 qmp: Assert that no other monitor is active
monitor_qmp_dispatch() is never supposed to be called in the context of
another monitor, so assert that monitor_cur() is NULL instead of saving
and restoring it.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-6-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
ff04108a0e hmp: Update current monitor only in handle_hmp_command()
The current monitor is updated relatively early in the command handling
code even though only the command handler actually needs it.

The current monitor will become coroutine-local later, so we can only
update it when we know in which coroutine the command will be exectued.
Move it to handle_hmp_command() where this information will be
available.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-5-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
947e47448d monitor: Use getter/setter functions for cur_mon
cur_mon really needs to be coroutine-local as soon as we move monitor
command handlers to coroutines and let them yield. As a first step, just
remove all direct accesses to cur_mon so that we can implement this in
the getter function later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-4-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
87e6f4a4d6 monitor: Add Monitor parameter to monitor_get_cpu_index()
Most callers actually don't have to rely on cur_mon, but already know
for which monitor they call monitor_get_cpu_index().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-3-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Kevin Wolf
dcba65f824 monitor: Add Monitor parameter to monitor_set_cpu()
Most callers actually don't have to rely on cur_mon, but already know
for which monitor they call monitor_set_cpu().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201005155855.256490-2-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-10-09 07:08:19 +02:00
Philippe Mathieu-Daudé
61c7f9876a qapi: Extract PCI commands to 'pci.json'
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the PCI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-9-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé
27c9188fa0 qapi: Extract ACPI commands to 'acpi.json'
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Extracting the ACPI commands to their own schema reduces the size of
the qapi-misc* headers generated, and pulls less QAPI-generated code
into user-mode.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-8-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:36 +02:00
Philippe Mathieu-Daudé
a83e24ba1a qapi: Restrict balloon-related commands to machine code
Only qemu-system-FOO and qemu-storage-daemon provide QMP
monitors, therefore such declarations and definitions are
irrelevant for user-mode emulation.

Restricting the balloon-related commands to machine.json pulls less
QAPI-generated code into user-mode.

Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200913195348.1064154-4-philmd@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-09-29 15:41:35 +02:00
Dr. David Alan Gilbert
0210c3b39b monitor: Use LOCK_GUARD macros
Use the lock guard macros in monitor/misc.c - saves
a lot of unlocks in error paths, and the occasional goto.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200922095741.101911-1-dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-09-25 12:45:58 +01:00
Stefan Hajnoczi
d73415a315 qemu/atomic.h: rename atomic_ to qatomic_
clang's C11 atomic_fetch_*() functions only take a C11 atomic type
pointer argument. QEMU uses direct types (int, etc) and this causes a
compiler error when a QEMU code calls these functions in a source file
that also included <stdatomic.h> via a system header file:

  $ CC=clang CXX=clang++ ./configure ... && make
  ../util/async.c:79:17: error: address argument to atomic operation must be a pointer to _Atomic type ('unsigned int *' invalid)

Avoid using atomic_*() names in QEMU's atomic.h since that namespace is
used by <stdatomic.h>. Prefix QEMU's APIs with 'q' so that atomic.h
and <stdatomic.h> can co-exist. I checked /usr/include on my machine and
searched GitHub for existing "qatomic_" users but there seem to be none.

This patch was generated using:

  $ git grep -h -o '\<atomic\(64\)\?_[a-z0-9_]\+' include/qemu/atomic.h | \
    sort -u >/tmp/changed_identifiers
  $ for identifier in $(</tmp/changed_identifiers); do
        sed -i "s%\<$identifier\>%q$identifier%g" \
            $(git grep -I -l "\<$identifier\>")
    done

I manually fixed line-wrap issues and misaligned rST tables.

Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200923105646.47864-1-stefanha@redhat.com>
2020-09-23 16:07:44 +01:00
Daniel P. Berrangé
60efffa41b monitor: simplify functions for getting a dup'd fdset entry
Currently code has to call monitor_fdset_get_fd, then dup
the return fd, and then add the duplicate FD back into the
fdset. This dance is overly verbose for the caller and
introduces extra failure modes which can be avoided by
folding all the logic into monitor_fdset_dup_fd_add and
removing monitor_fdset_get_fd entirely.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2020-09-16 10:33:48 +01:00
Paolo Bonzini
feabc71dfa configure: do not include dependency flags in QEMU_CFLAGS and LIBS
All Meson executables should specify their dependencies explicitly, either
directly or indirectly via declare_dependency.  Makefiles instead did
not propagate dependencies correctly from static libraries, for example.
Therefore, flags for dependencies need not be included in QEMU_CFLAGS.
LIBS is not used at all, so drop that one as well.

In a few cases the dependencies were not yet specified, so add them.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-09-08 11:43:16 +02:00
Max Reitz
31e4c354b3 migration: Add block-bitmap-mapping parameter
This migration parameter allows mapping block node names and bitmap
names to aliases for the purpose of block dirty bitmap migration.

This way, management tools can use different node and bitmap names on
the source and destination and pass the mapping of how bitmaps are to be
transferred to qemu (on the source, the destination, or even both with
arbitrary aliases in the migration stream).

While touching this code, fix a bug where bitmap names longer than 255
bytes would fail an assertion in qemu_put_counted_string().

Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20200820150725.68687-2-mreitz@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
2020-08-21 08:56:09 -05:00
Paolo Bonzini
ff219dca9f meson: convert common QMP bits for qemu and qemu-storage-daemon
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:30:22 -04:00
Paolo Bonzini
243af0225a trace: switch position of headers to what Meson requires
Meson doesn't enjoy the same flexibility we have with Make in choosing
the include path.  In particular the tracing headers are using
$(build_root)/$(<D).

In order to keep the include directives unchanged,
the simplest solution is to generate headers with patterns like
"trace/trace-audio.h" and place forwarding headers in the source tree
such that for example "audio/trace.h" includes "trace/trace-audio.h".

This patch is too ugly to be applied to the Makefiles now.  It's only
a way to separate the changes to the tracing header files from the
Meson rewrite of the tracing logic.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-08-21 06:18:24 -04:00
Philippe Mathieu-Daudé
833ef7ec56 monitor/misc: Remove unused "chardev/char-mux.h" include
monitor/misc.c never required "chardev/char-mux.h", remove it.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200423202112.644-2-philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2020-07-13 11:59:47 +04:00
Markus Armbruster
b11a093c60 qapi: Smooth another visitor error checking pattern
Convert

    visit_type_FOO(v, ..., &ptr, &err);
    ...
    if (err) {
        ...
    }

to

    visit_type_FOO(v, ..., &ptr, errp);
    ...
    if (!ptr) {
        ...
    }

for functions that set @ptr to non-null / null on success / error.

Eliminate error_propagate() that are now unnecessary.  Delete @err
that are now unused.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200707160613.848843-40-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
62a35aaa31 qapi: Use returned bool to check for failure, Coccinelle part
The previous commit enables conversion of

    visit_foo(..., &err);
    if (err) {
        ...
    }

to

    if (!visit_foo(..., errp)) {
        ...
    }

for visitor functions that now return true / false on success / error.
Coccinelle script:

    @@
    identifier fun =~ "check_list|input_type_enum|lv_start_struct|lv_type_bool|lv_type_int64|lv_type_str|lv_type_uint64|output_type_enum|parse_type_bool|parse_type_int64|parse_type_null|parse_type_number|parse_type_size|parse_type_str|parse_type_uint64|print_type_bool|print_type_int64|print_type_null|print_type_number|print_type_size|print_type_str|print_type_uint64|qapi_clone_start_alternate|qapi_clone_start_list|qapi_clone_start_struct|qapi_clone_type_bool|qapi_clone_type_int64|qapi_clone_type_null|qapi_clone_type_number|qapi_clone_type_str|qapi_clone_type_uint64|qapi_dealloc_start_list|qapi_dealloc_start_struct|qapi_dealloc_type_anything|qapi_dealloc_type_bool|qapi_dealloc_type_int64|qapi_dealloc_type_null|qapi_dealloc_type_number|qapi_dealloc_type_str|qapi_dealloc_type_uint64|qobject_input_check_list|qobject_input_check_struct|qobject_input_start_alternate|qobject_input_start_list|qobject_input_start_struct|qobject_input_type_any|qobject_input_type_bool|qobject_input_type_bool_keyval|qobject_input_type_int64|qobject_input_type_int64_keyval|qobject_input_type_null|qobject_input_type_number|qobject_input_type_number_keyval|qobject_input_type_size_keyval|qobject_input_type_str|qobject_input_type_str_keyval|qobject_input_type_uint64|qobject_input_type_uint64_keyval|qobject_output_start_list|qobject_output_start_struct|qobject_output_type_any|qobject_output_type_bool|qobject_output_type_int64|qobject_output_type_null|qobject_output_type_number|qobject_output_type_str|qobject_output_type_uint64|start_list|visit_check_list|visit_check_struct|visit_start_alternate|visit_start_list|visit_start_struct|visit_type_.*";
    expression list args;
    typedef Error;
    Error *err;
    @@
    -    fun(args, &err);
    -    if (err)
    +    if (!fun(args, &err))
         {
             ...
         }

A few line breaks tidied up manually.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-19-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
Markus Armbruster
3c4b89c3b2 hmp: Eliminate a variable in hmp_migrate_set_parameter()
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20200707160613.848843-17-armbru@redhat.com>
2020-07-10 15:18:08 +02:00
David Hildenbrand
722a3c783e virtio-pci: Send qapi events when the virtio-mem size changes
Let's register the notifier and trigger the qapi event with the right
device id.

MEMORY_DEVICE_SIZE_CHANGE is similar to BALLOON_CHANGE, however on a
memory device level.

Don't unregister the notifier (we neither have finalize() nor unrealize()
for VirtIOPCIProxy, so it's not that simple to do it) - both devices are
expected to vanish at the same time.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Eric Blake <eblake@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-18-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-03 07:57:04 -04:00
David Hildenbrand
2e70874b16 hmp: Handle virtio-mem when printing memory device info
Print the memory device info just like for other memory devices.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20200626072248.78761-14-david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-07-03 07:57:04 -04:00
Mao Zhongyi
afb5d01cb6 monitor/hmp-cmds: improvements for the 'info migrate'
When running:

(qemu) info migrate
globals:
store-global-state: on
only-migratable: off
...
xbzrle transferred: 640892 kbytes
xbzrle pages: 16645936 pages
xbzrle cache miss: 1525426
xbzrle cache miss rate: 0.09
xbzrle encoding rate: 91.42
xbzrle overflow: 40896
...
compression pages: 377710 pages
compression busy: 0
compression busy rate: 0.00
compressed size: 463169457
compression rate: 3.33

Add units for 'xbzrle cache miss' and 'compressed size',
make it easier to read.

Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200603080904.997083-8-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Mao Zhongyi
ac9c95b13f monitor/hmp-cmds: add 'goto end' to reduce duplicate code.
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200603080904.997083-7-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Mao Zhongyi
0705ecc4ad monitor/hmp-cmds: delete redundant Error check before invoke hmp_handle_error()
hmp_handle_error() does Error check internally.

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200603080904.997083-6-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Mao Zhongyi
fe025508c0 monitor/hmp-cmds: don't silently output when running 'migrate_set_downtime' fails
Although 'migrate_set_downtime' has been deprecated and replaced
with 'migrate_set_parameter downtime_limit', it has not been
completely eliminated, possibly due to compatibility with older
versions. I think as long as this old parameter is running, we
should report appropriate message when something goes wrong, not
be silent.

before:
(qemu) migrate_set_downtime -1
(qemu)

after:
(qemu) migrate_set_downtime -1
Error: Parameter 'downtime_limit' expects an integer in the range of 0 to 2000 seconds

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200603080904.997083-5-maozhongyi@cmss.chinamobile.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Mao Zhongyi
39337f1211 monitor/hmp-cmds: add units for migrate_parameters
When running:
(qemu) info migrate_parameters
announce-initial: 50 ms
announce-max: 550 ms
announce-step: 100 ms
compress-wait-thread: on
...
max-bandwidth: 33554432 bytes/second
downtime-limit: 300 milliseconds
x-checkpoint-delay: 20000
...
xbzrle-cache-size: 67108864

add units for the parameters 'x-checkpoint-delay' and
'xbzrle-cache-size', it's easier to read, also move
milliseconds to ms to keep the same style.

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20200603080904.997083-4-maozhongyi@cmss.chinamobile.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-06-17 17:48:39 +01:00
Peter Maydell
7d3660e798 * Miscellaneous fixes and feature enablement (many)
* SEV refactoring (David)
 * Hyper-V initial support (Jon)
 * i386 TCG fixes (x87 and SSE, Joseph)
 * vmport cleanup and improvements (Philippe, Liran)
 * Use-after-free with vCPU hot-unplug (Nengyuan)
 * run-coverity-scan improvements (myself)
 * Record/replay fixes (Pavel)
 * -machine kernel_irqchip=split improvements for INTx (Peter)
 * Code cleanups (Philippe)
 * Crash and security fixes (PJP)
 * HVF cleanups (Roman)
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7jpdAUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfjwf/X7+0euuE9dwKFKDDMmIi+4lRWnq7
 gSOyE1BYSfDIUXRIukf64konXe0VpiotNYlyEaYnnQjkMdGm5E9iXKF+LgEwXj/t
 NSGkfj5J3VeWRG4JJp642CSN/aZWO8uzkenld3myCnu6TicuN351tDJchiFwAk9f
 wsXtgLKd67zE8MLVt8AP0rNTbzMHttPXnPaOXDCuwjMHNvMEKnC93UeOeM0M4H5s
 3Dl2HvsNWZ2SzUG9mAbWp0bWWuoIb+Ep9//87HWANvb7Z8jratRws18i6tYt1sPx
 8zOnUS87sVnh1CQlXBDd9fEcqBUVgR9pAlqaaYavNhFp5eC31euvpDU8Iw==
 =F4sU
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* Miscellaneous fixes and feature enablement (many)
* SEV refactoring (David)
* Hyper-V initial support (Jon)
* i386 TCG fixes (x87 and SSE, Joseph)
* vmport cleanup and improvements (Philippe, Liran)
* Use-after-free with vCPU hot-unplug (Nengyuan)
* run-coverity-scan improvements (myself)
* Record/replay fixes (Pavel)
* -machine kernel_irqchip=split improvements for INTx (Peter)
* Code cleanups (Philippe)
* Crash and security fixes (PJP)
* HVF cleanups (Roman)

# gpg: Signature made Fri 12 Jun 2020 16:57:04 BST
# gpg:                using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg:                issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (116 commits)
  target/i386: Remove obsolete TODO file
  stubs: move Xen stubs to accel/
  replay: fix replay shutdown for console mode
  exec/cpu-common: Move MUSB specific typedefs to 'hw/usb/hcd-musb.h'
  hw/usb: Move device-specific declarations to new 'hcd-musb.h' header
  exec/memory: Remove unused MemoryRegionMmio type
  checkpatch: reversed logic with acpi test checks
  target/i386: sev: Unify SEVState and SevGuestState
  target/i386: sev: Remove redundant handle field
  target/i386: sev: Remove redundant policy field
  target/i386: sev: Remove redundant cbitpos and reduced_phys_bits fields
  target/i386: sev: Partial cleanup to sev_state global
  target/i386: sev: Embed SEVState in SevGuestState
  target/i386: sev: Rename QSevGuestInfo
  target/i386: sev: Move local structure definitions into .c file
  target/i386: sev: Remove unused QSevGuestInfoClass
  xen: fix build without pci passthrough
  i386: hvf: Drop HVFX86EmulatorState
  i386: hvf: Move mmio_buf into CPUX86State
  i386: hvf: Move lazy_flags into CPUX86State
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

# Conflicts:
#	hw/i386/acpi-build.c
2020-06-12 23:06:22 +01:00
Peter Xu
12fcf49c1a pci: Display PCI IRQ pin in "info pci"
Sometimes it would be good to be able to read the pin number along
with the IRQ number allocated.  Since we'll dump the IRQ number, no
reason to not dump the pin information.  For example, the vfio-pci
device will overwrite the pin with the hardware pin number.  It would
be nice to know the pin number of one assigned device from QMP/HMP.

CC: Dr. David Alan Gilbert <dgilbert@redhat.com>
CC: Alex Williamson <alex.williamson@redhat.com>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
CC: Julia Suvorova <jusual@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20200317195908.283800-1-peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
2020-06-12 10:17:06 -04:00
Philippe Mathieu-Daudé
2261d3939f memory: Make 'info mtree' not display disabled regions by default
We might have many disabled memory regions, making the 'info mtree'
output too verbose to be useful.
Remove the disabled regions in the default output, but allow the
monitor user to display them using the '-D' option.

Before:

  (qemu) info mtree
  memory-region: system
    0000000000000000-ffffffffffffffff (prio 0, i/o): system
      0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff
      0000000000000000-ffffffffffffffff (prio -1, i/o): pci
        00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
        00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
        00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff
        00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
      00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
      00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c0000-00000000000c3fff [disabled]
      00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c0000-00000000000c3fff [disabled]
      00000000000c0000-00000000000c3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c0000-00000000000c3fff [disabled]
      00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
      00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000c4000-00000000000c7fff [disabled]
      00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000c4000-00000000000c7fff [disabled]
      00000000000c4000-00000000000c7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000c4000-00000000000c7fff [disabled]
      00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
      00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000c8000-00000000000cbfff [disabled]
      00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000c8000-00000000000cbfff [disabled]
      00000000000c8000-00000000000cbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000c8000-00000000000cbfff [disabled]
      00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff
      00000000000cc000-00000000000cffff (prio 1, ram): alias pam-ram @pc.ram 00000000000cc000-00000000000cffff [disabled]
      00000000000cc000-00000000000cffff (prio 1, ram): alias pam-pci @pc.ram 00000000000cc000-00000000000cffff [disabled]
      00000000000cc000-00000000000cffff (prio 1, ram): alias pam-rom @pc.ram 00000000000cc000-00000000000cffff [disabled]
      00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff
      00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d0000-00000000000d3fff [disabled]
      00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d0000-00000000000d3fff [disabled]
      00000000000d0000-00000000000d3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d0000-00000000000d3fff [disabled]
      00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff
      00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000d4000-00000000000d7fff [disabled]
      00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000d4000-00000000000d7fff [disabled]
      00000000000d4000-00000000000d7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000d4000-00000000000d7fff [disabled]
      00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff
      00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-ram @pc.ram 00000000000d8000-00000000000dbfff [disabled]
      00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-pci @pc.ram 00000000000d8000-00000000000dbfff [disabled]
      00000000000d8000-00000000000dbfff (prio 1, ram): alias pam-rom @pc.ram 00000000000d8000-00000000000dbfff [disabled]
      00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff
      00000000000dc000-00000000000dffff (prio 1, ram): alias pam-ram @pc.ram 00000000000dc000-00000000000dffff [disabled]
      00000000000dc000-00000000000dffff (prio 1, ram): alias pam-pci @pc.ram 00000000000dc000-00000000000dffff [disabled]
      00000000000dc000-00000000000dffff (prio 1, ram): alias pam-rom @pc.ram 00000000000dc000-00000000000dffff [disabled]
      00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff
      00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e0000-00000000000e3fff [disabled]
      00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e0000-00000000000e3fff [disabled]
      00000000000e0000-00000000000e3fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e0000-00000000000e3fff [disabled]
      00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff
      00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-ram @pc.ram 00000000000e4000-00000000000e7fff [disabled]
      00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-pci @pc.ram 00000000000e4000-00000000000e7fff [disabled]
      00000000000e4000-00000000000e7fff (prio 1, ram): alias pam-rom @pc.ram 00000000000e4000-00000000000e7fff [disabled]
      00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff
      00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-ram @pc.ram 00000000000e8000-00000000000ebfff [disabled]
      00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-pci @pc.ram 00000000000e8000-00000000000ebfff [disabled]
      00000000000e8000-00000000000ebfff (prio 1, ram): alias pam-rom @pc.ram 00000000000e8000-00000000000ebfff [disabled]
      00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff
      00000000000ec000-00000000000effff (prio 1, ram): alias pam-ram @pc.ram 00000000000ec000-00000000000effff [disabled]
      00000000000ec000-00000000000effff (prio 1, ram): alias pam-pci @pc.ram 00000000000ec000-00000000000effff [disabled]
      00000000000ec000-00000000000effff (prio 1, ram): alias pam-rom @pc.ram 00000000000ec000-00000000000effff [disabled]
      00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff
      00000000000f0000-00000000000fffff (prio 1, ram): alias pam-ram @pc.ram 00000000000f0000-00000000000fffff [disabled]
      00000000000f0000-00000000000fffff (prio 1, ram): alias pam-pci @pc.ram 00000000000f0000-00000000000fffff [disabled]
      00000000000f0000-00000000000fffff (prio 1, ram): alias pam-rom @pc.ram 00000000000f0000-00000000000fffff [disabled]
      00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff
      00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic
      00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
      00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi

After:

  (qemu) info mtree
  memory-region: system
    0000000000000000-ffffffffffffffff (prio 0, i/o): system
      0000000000000000-0000000007ffffff (prio 0, ram): alias ram-below-4g @pc.ram 0000000000000000-0000000007ffffff
      0000000000000000-ffffffffffffffff (prio -1, i/o): pci
        00000000000a0000-00000000000bffff (prio 1, i/o): vga-lowmem
        00000000000c0000-00000000000dffff (prio 1, rom): pc.rom
        00000000000e0000-00000000000fffff (prio 1, rom): alias isa-bios @pc.bios 0000000000020000-000000000003ffff
        00000000fffc0000-00000000ffffffff (prio 0, rom): pc.bios
      00000000000a0000-00000000000bffff (prio 1, i/o): alias smram-region @pci 00000000000a0000-00000000000bffff
      00000000000c0000-00000000000c3fff (prio 1, i/o): alias pam-pci @pci 00000000000c0000-00000000000c3fff
      00000000000c4000-00000000000c7fff (prio 1, i/o): alias pam-pci @pci 00000000000c4000-00000000000c7fff
      00000000000c8000-00000000000cbfff (prio 1, i/o): alias pam-pci @pci 00000000000c8000-00000000000cbfff
      00000000000cc000-00000000000cffff (prio 1, i/o): alias pam-pci @pci 00000000000cc000-00000000000cffff
      00000000000d0000-00000000000d3fff (prio 1, i/o): alias pam-pci @pci 00000000000d0000-00000000000d3fff
      00000000000d4000-00000000000d7fff (prio 1, i/o): alias pam-pci @pci 00000000000d4000-00000000000d7fff
      00000000000d8000-00000000000dbfff (prio 1, i/o): alias pam-pci @pci 00000000000d8000-00000000000dbfff
      00000000000dc000-00000000000dffff (prio 1, i/o): alias pam-pci @pci 00000000000dc000-00000000000dffff
      00000000000e0000-00000000000e3fff (prio 1, i/o): alias pam-pci @pci 00000000000e0000-00000000000e3fff
      00000000000e4000-00000000000e7fff (prio 1, i/o): alias pam-pci @pci 00000000000e4000-00000000000e7fff
      00000000000e8000-00000000000ebfff (prio 1, i/o): alias pam-pci @pci 00000000000e8000-00000000000ebfff
      00000000000ec000-00000000000effff (prio 1, i/o): alias pam-pci @pci 00000000000ec000-00000000000effff
      00000000000f0000-00000000000fffff (prio 1, i/o): alias pam-pci @pci 00000000000f0000-00000000000fffff
      00000000fec00000-00000000fec00fff (prio 0, i/o): ioapic
      00000000fed00000-00000000fed003ff (prio 0, i/o): hpet
      00000000fee00000-00000000feefffff (prio 4096, i/o): apic-msi

The old behavior is preserved using 'info mtree -D'.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-10 12:10:49 -04:00
Philippe Mathieu-Daudé
688ffbb4f7 various: Remove unnecessary OBJECT() cast
The OBJECT() macro is defined as:

  #define OBJECT(obj) ((Object *)(obj))

Remove the unnecessary OBJECT() casts when we already know the
pointer is of Object type.

Patch created mechanically using spatch with this script:

  @@
  typedef Object;
  Object *o;
  @@
  -   OBJECT(o)
  +   o

Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-3-f4bug@amsat.org>
[Trivial rebase conflict in hw/s390x/sclp.c resolved]
2020-05-15 07:08:14 +02:00
Markus Armbruster
ddfb0baaf2 qom: Clean up inconsistent use of gchar * vs. char *
Uses of gchar * in qom/object.h:

* ObjectProperty member @name

  Functions that take a property name argument all use char *.  Change
  the member to match.

* ObjectProperty member @type

  Functions that take a property type argument or return it all use
  char *.  Change the member to match.

* ObjectProperty member @description

  Functions that take a property description argument all use char *.
  Change the member to match.

* object_resolve_path_component() parameter @part

  Path components are property names.  Most callers pass char *
  arguments.  Change the parameter to match.  Adjust the few callers
  that pass gchar * to pass char *.

* Return value of object_get_canonical_path_component(),
  object_get_canonical_path()

  Most callers convert their return values right back to char *.
  Change the return value to match.  Adjust the few callers where that
  would add a conversion to gchar * to use char * instead.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-3-armbru@redhat.com>
2020-05-15 06:26:02 +02:00
Wei Wang
e460a4b1a4 migration/xbzrle: add encoding rate
Users may need to check the xbzrle encoding rate to know if the guest
memory is xbzrle encoding-friendly, and dynamically turn off the
encoding if the encoding rate is low.

Signed-off-by: Yi Sun <yi.y.sun@intel.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <1588208375-19556-1-git-send-email-wei.w.wang@intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Keqian Zhu
cbbf818224 migration/throttle: Add cpu-throttle-tailslow migration parameter
At the tail stage of throttling, the Guest is very sensitive to
CPU percentage while the @cpu-throttle-increment is excessive
usually at tail stage.

If this parameter is true, we will compute the ideal CPU percentage
used by the Guest, which may exactly make the dirty rate match the
dirty rate threshold. Then we will choose a smaller throttle increment
between the one specified by @cpu-throttle-increment and the one
generated by ideal CPU percentage.

Therefore, it is compatible to traditional throttling, meanwhile
the throttle increment won't be excessive at tail stage. This may
make migration time longer, and is disabled by default.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200413101508.54793-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Mao Zhongyi
7ac5529afb migration: move the units of migrate parameters from milliseconds to ms
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <474bb6cf67defb8be9de5035c11aee57a680557a.1585641083.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Mao Zhongyi
f96c6a8736 monitor/hmp-cmds: add hmp_handle_error() for hmp_migrate_set_speed()
Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <305323f835436023c53d759f5ab18af3ec874183.1585641083.git.maozhongyi@cmss.chinamobile.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-05-07 17:40:24 +01:00
Daniel Brodsky
6e8a355de6 lockable: replaced locks with lock guard macros where appropriate
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end

Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2020-05-04 16:07:43 +01:00
Markus Armbruster
2061487bdb qapi: Disallow qmp_marshal_FOO(NULL, ...)
For QMP commands without arguments, gen_marshal() laboriously
generates a qmp_marshal_FOO() that copes with null @args.  Turns
there's just one caller that passes null instead of an empty QDict.
Adjust that caller, and simplify gen_marshal().

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200424084338.26803-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-04-30 07:26:41 +02:00
Markus Armbruster
1f5842487a qapi: Only input visitors can actually fail
The previous few commits have made this more obvious, and removed the
one exception.  Time to clarify the documentation, and drop dead error
checking.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200424084338.26803-13-armbru@redhat.com>
2020-04-30 07:26:40 +02:00
Mao Zhongyi
7cd75cbdb8 migration: use "" instead of (null) for tls-authz
run:
(qemu) info migrate_parameters
announce-initial: 50 ms
...
announce-max: 550 ms
multifd-compression: none
xbzrle-cache-size: 4194304
max-postcopy-bandwidth: 0
 tls-authz: '(null)'

Migration parameter 'tls-authz' is used to provide the QOM ID
of a QAuthZ subclass instance that provides the access control
check, default is NULL. But the empty string is not a valid
object ID, so use "" instead of the default. Although it will
fail when lookup an object with ID "", it is harmless, just
consistent with tls_creds.

As a bonus, this patch also fixed the bad indentation on the
last line and removed 'has_tls_authz' redundant check in
'hmp_info_migrate_parameters'.

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <119f539a9f4d198bc3bcced46b8280520d60bc51.1585100802.git.maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25 12:31:38 +00:00
Dr. David Alan Gilbert
d4ff109373 hmp/vnc: Fix info vnc list leak
We're iterating the list, and then freeing the iteration pointer rather
than the list head.

Fixes: 0a9667ecdb ("hmp: Update info vnc")
Reported-by: Coverity (CID 1421932)
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200323120822.51266-1-dgilbert@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25 12:31:38 +00:00
Mao Zhongyi
06b1c6f8b7 xbzrle: update xbzrle doc
Add new parameter description, also:
1. Remove unsociable space.
2. Nit picking: s/two/2 in report

Signed-off-by: Mao Zhongyi <maozhongyi@cmss.chinamobile.com>
Message-Id: <20200320143216.423374-1-maozhongyi@cmss.chinamobile.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25 12:31:38 +00:00
Pan Nengyuan
33ee3d96c7 hmp-cmd: fix a missing_break warning
This fix coverity issues 94417686:
    1260        break;
    CID 94417686: (MISSING_BREAK)
    1261. unterminated_case: The case for value "MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD" is not terminated by a 'break' statement.
    1261    case MIGRATION_PARAMETER_THROTTLE_TRIGGER_THRESHOLD:
    1262        p->has_throttle_trigger_threshold = true;
    1263        visit_type_int(v, param, &p->throttle_trigger_threshold, &err);
    1264    case MIGRATION_PARAMETER_CPU_THROTTLE_INITIAL:

Fixes: dc14a47076
Fixes: Coverity (CID 1421950)
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <20200318071620.59748-1-pannengyuan@huawei.com>
Reviewed-by: Keqian Zhu <zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-25 12:31:38 +00:00
Eric Blake
08712fcb85 net: Track netdevs in NetClientState rather than QemuOpt
As mentioned in the previous patch, our use of QemuOpt group "netdev"
has two purposes: collect the CLI arguments, and serve as a witness
for monitor hotplug actions.  As the latter didn't use anything but an
id, it felt rather unclean to have to touch QemuOpts at all when going
through QMP, so let's instead track things with a bool field in
NetClientState.

Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 21:50:36 +01:00
Eric Blake
db2a380c84 net: Complete qapi-fication of netdev_add
We've had all the required pieces for doing a type-safe representation
of netdev_add as a flat union for quite some time now (since
0e55c381f6 in v2.7.0, released in 2016), but did not make the final
switch to using it because of concern about whether a command-line
regression in accepting "1" in place of 1 for integer arguments would
be problematic.  Back then, we did not have the deprecation cycle to
allow us to make progress.  But now that we have waited so long, other
problems have crept in: for example, our desire to add
qemu-storage-daemon is hampered by the inability to express net
objects, and we are unable to introspect what we actually accept.
Additionally, our round-trip through QemuOpts silently eats any
argument that expands to an array, rendering dnssearch, hostfwd, and
guestfwd useless through QMP:

{"execute": "netdev_add", "arguments": { "id": "netdev0",
  "type": "user", "dnssearch": [
    { "str": "8.8.8.8" }, { "str": "8.8.4.4" }
  ]}}

So without further ado, let's turn on proper QAPI.  netdev_add() was a
trivial wrapper around net_client_init(), which did a few steps prior
to calling net_client_init1(); with this patch, we now skip directly
to net_client_init1().  In addition to fixing array parameters, the
following additional differences occur:

-  {"execute": "netdev_add", "arguments": {"type": "help"}}
no longer attempts to print help to stdout and exit.  Bug fix, broken
in 547203ead4 'net: List available netdevs with "-netdev help"',
v2.12.0.

-  {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }}
no longer attempts to desugar the undocumented ipv6-net magic string
into the proper "ipv6-prefix" and "ipv6-prefixlen".  Undocumented
misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options
& slirp: Adding Qemu options for IPv6 addresses", v2.6.0.

-  {'execute':'netdev_add',
     'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}}
   {"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}}
Used to succeed: since our command line treats everything as strings,
our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost
the original typing and turned everything into a string; now that we
skip the QemuOpts, the JSON input has to match the exact QAPI type.
But this stricter QMP is desirable, and introspection is sufficient
for any affected applications to make sure they use it correctly.

In qmp_netdev_add(), we still have to create a QemuOpts object so that
qmp_netdev_del() will be able to remove a hotplugged network device;
but the opts->head remains empty since we now manage all parsing
through the QAPI object rather than QemuOpts; a separate patch will
address the abuse of QemuOpts as a witness for whether a
NetClientState is a netdev.  In the meantime, our argument that we are
okay requires auditing all uses of option group "netdev":

- qemu_netdev_opts: option group definition, empty .desc[]
- CLI (CLI netdev parsing ends before monitors start, so while
  monitors can mess with CLI netdevs, CLI cannot mess with
  monitor netdevs):
  - main() case QEMU_OPTION_netdev: store CLI definition
  - main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig:
  similar, dealing only with CLI
  - net_init_clients(): Pass CLI to net_client_init()
- Monitor:
  - hmp_netdev_add(): straightforward parse into net_client_init()
  - qmp_netdev_add(): subject of this patch, used to add full
  object to option group, now just adds bare-bones id
  - qmp_netdev_del(), netdev_del_completion(): check the option group
  solely for id, as a 'is this a netdev' predicate

Reported-by: Alex Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-2-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 21:50:14 +01:00
Marc-André Lureau
f0ccc00be1 qmp: constify QmpCommand and list
Since 0b69f6f72c "qapi: remove
qmp_unregister_command()", the command list can be declared const.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>
Message-Id: <20200316171824.2319695-1-marcandre.lureau@redhat.com>
[Rebased]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-03-17 21:43:12 +01:00
Keqian Zhu
dc14a47076 migration/throttle: Add throttle-trig-thres migration parameter
Currently, if the bytes_dirty_period is more than the 50% of
bytes_xfer_period, we start or increase throttling.

If we make this percentage higher, then we can tolerate higher
dirty rate during migration, which means less impact on guest.
The side effect of higher percentage is longer migration time.
We can make this parameter configurable to switch between mig-
ration time first or guest performance first.

The default value is 50 and valid range is 1 to 100.

Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Message-Id: <20200224023142.39360-1-zhukeqian1@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-13 09:36:30 +00:00
Maxim Levitsky
2bcad73c4b monitor/hmp: move hmp_info_block* to block-hmp-cmds.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-11-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:20:21 +00:00
Maxim Levitsky
1061f8dd80 monitor/hmp: move remaining hmp_block* functions to block-hmp-cmds.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-10-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:20:13 +00:00
Maxim Levitsky
e263120ecc monitor/hmp: move hmp_nbd_server* to block-hmp-cmds.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-9-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:17:58 +00:00
Maxim Levitsky
fce2b91fdf monitor/hmp: move hmp_snapshot_* to block-hmp-cmds.c
hmp_snapshot_blkdev is from GPLv2 version of the hmp-cmds.c thus
have to change the licence to GPLv2

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-8-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:07:50 +00:00
Maxim Levitsky
6b7fbf61fb monitor/hmp: move hmp_block_job* to block-hmp-cmds.c
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-7-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:07:48 +00:00
Maxim Levitsky
0932e3f23d monitor/hmp: move hmp_drive_mirror and hmp_drive_backup to block-hmp-cmds.c
Moved code was added after 2012-01-13, thus under GPLv2+

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20200308092440.23564-6-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Fixed commit message
2020-03-09 18:07:35 +00:00
Maxim Levitsky
a2dde2f221 monitor/hmp: rename device-hotplug.c to block/monitor/block-hmp-cmds.c
These days device-hotplug.c only contains the hmp_drive_add
In the next patch, rest of hmp_drive* functions will be moved
there.

Also add block-hmp-cmds.h to contain prototypes of these
functions

License for block-hmp-cmds.h since it contains the code
moved from sysemu.h which lacks license and thus according
to LICENSE is under GPLv2+

Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200308092440.23564-4-mlevitsk@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-03-09 18:05:31 +00:00
Chen Qun
916c92503b monitor/hmp-cmds: Remove redundant statement in hmp_rocker_of_dpa_groups()
Clang static code analyzer show warning:
monitor/hmp-cmds.c:2867:17: warning: Value stored to 'set' is never read
                set = true;
                ^     ~~~~

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200302130715.29440-14-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-03-09 15:59:31 +01:00
Kevin Wolf
2af282ec51 qemu-storage-daemon: Add --monitor option
This adds and parses the --monitor option, so that a QMP monitor can be
used in the storage daemon. The monitor offers commands defined in the
QAPI schema at storage-daemon/qapi/qapi-schema.json.

The --monitor options currently allows to create multiple monitors with
the same ID. This part of the interface is considered unstable. We will
reject such configurations as soon as we have a design for the monitor
subsystem to perform these checks. (In the system emulator, we depend on
QemuOpts rejecting duplicate IDs.)

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-21-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
a2f411c467 monitor: Add allow_hmp parameter to monitor_init()
Add a new parameter allow_hmp to monitor_init() so that the storage
daemon can disable HMP.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-20-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
8e9119a807 hmp: Fail gracefully if chardev is already in use
Trying to attach a HMP monitor to a chardev that is already in use
results in a crash because monitor_init_hmp() passes &error_abort to
qemu_chr_fe_init():

$ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo --mon foo
QEMU 4.2.50 monitor - type 'help' for more information
(qemu) Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220:
qemu-system-x86_64: --mon foo: Device 'foo' is in use
Abgebrochen (Speicherabzug geschrieben)

Fix this by allowing monitor_init_hmp() to return an error and passing
any error in qemu_chr_fe_init() to its caller instead of aborting.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-19-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
f27a9bb3e9 qmp: Fail gracefully if chardev is already in use
Trying to attach a QMP monitor to a chardev that is already in use
results in a crash because monitor_init_qmp() passes &error_abort to
qemu_chr_fe_init():

$ ./x86_64-softmmu/qemu-system-x86_64 --chardev stdio,id=foo --mon foo,mode=control --mon foo,mode=control
Unexpected error in qemu_chr_fe_init() at chardev/char-fe.c:220:
qemu-system-x86_64: --mon foo,mode=control: Device 'foo' is in use
Abgebrochen (Speicherabzug geschrieben)

Fix this by allowing monitor_init_qmp() to return an error and passing
any error in qemu_chr_fe_init() to its caller instead of aborting.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-18-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
f2098725aa monitor: Create QAPIfied monitor_init()
This adds a new QAPI-based monitor_init() function. The existing
monitor_init_opts() is rewritten to simply put its QemuOpts parameter
into a visitor and pass the resulting QAPI object to monitor_init().

This will cause some change in those error messages for the monitor
options in the system emulator that are now generated by the visitor
rather than explicitly checked in monitor_init_opts().

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-17-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
c62d24e906 blockdev-nbd: Boxed argument type for nbd-server-add
Move the arguments of nbd-server-add to a new struct BlockExportNbd and
convert the command to 'boxed': true. This makes it easier to share code
with the storage daemon.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-11-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:28 +01:00
Kevin Wolf
5f07c4d60d qapi: Flatten object-add
Mapping object-add to the command line as is doesn't result in nice
syntax because of the nesting introduced with 'props'. This becomes
nicer and more consistent with device_add and netdev_add when we accept
properties for the object on the top level instead.

'props' is still accepted after this patch, but marked as deprecated.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-8-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:21:27 +01:00
Kevin Wolf
5a16818b45 block: Move sysemu QMP commands to QAPI block module
QMP commands that are related to the system emulator and don't make
sense in the context of tools such as qemu-storage-daemon should live in
qapi/block.json rather than qapi/block-core.json. Move them there.

The associated data types are actually also used in code shared with the
tools, so they stay in block-core.json.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20200224143008.13362-6-kwolf@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2020-03-06 17:15:38 +01:00
Juan Quintela
6a9ad15420 multifd: Add multifd-zstd-level parameter
This parameter specifies the zstd compression level. The next patch
will put it to use.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
2020-02-28 09:25:28 +01:00
Juan Quintela
9004db48c0 multifd: Add multifd-zlib-level parameter
This parameter specifies the zlib compression level. The next patch
will put it to use.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-02-28 09:24:43 +01:00
Juan Quintela
96eef04238 multifd: Add multifd-compression parameter
This will store the compression method to use.  We start with none.

Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

---

Rename multifd-method to multifd-compression
2020-02-28 09:24:43 +01:00
Peter Krempa
facda5443f qapi: Allow getting flat output from 'query-named-block-nodes'
When a management application manages node names there's no reason to
recurse into backing images in the output of query-named-block-nodes.

Add a parameter to the command which will return just the top level
structs.

Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <4470f8c779abc404dcf65e375db195cd91a80651.1579509782.git.pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[mreitz: Fixed coding style]
Signed-off-by: Max Reitz <mreitz@redhat.com>
2020-02-20 16:43:42 +01:00
Kevin Wolf
7d3f505359 monitor: Move qmp_query_qmp_schema to qmp-cmds-control.c
monitor/misc.c contains code that works only in the system emulator, so
it can't be linked to tools like a storage daemon. In order to make
schema introspection available for tools, move the function to
monitor/qmp-cmds-control.c, which can be linked into the storage daemon.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-5-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-17 13:53:47 +01:00
Kevin Wolf
567628163e monitor: Collect "control" command handlers in qmp-cmds.control.c
Move all of the QMP commands handlers to implement the 'control' module
(qapi/control.json) that can be shared between the system emulator and
tools such as a storage daemon to a new file monitor/qmp-cmds-control.c.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-4-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-17 13:53:47 +01:00
Kevin Wolf
fa4dcf577e qapi: Split control.json off misc.json
misc.json contains definitions that are related to the system emulator,
so it can't be used for other tools like the storage daemon. This patch
moves basic functionality that is shared between all tools (and mostly
related to the monitor itself) into a new control.json, which could be
used in tools as well.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-3-kwolf@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-17 13:53:47 +01:00
Kevin Wolf
c3e9555182 monitor: Move monitor option parsing to monitor/monitor.c
Both the system emulators and tools with QMP support (specifically, the
planned storage daemon) will need to parse monitor options, so move that
code to monitor/monitor.c, which can be linked into binaries that aren't
a system emulator.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200129102239.31435-2-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-02-17 13:47:48 +01:00
Peter Maydell
5b7686f3fa nbd patches for 2020-02-06
- Allow setting NBD description from QMP for parity with qemu-nbd
 - Remove deprecated 'qemu-nbd --partition'
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEccLMIrHEYCkn0vOqp6FrSiUnQ2oFAl48C6YACgkQp6FrSiUn
 Q2qZQwf/Q6oUzYisDoMT58eRI1DPVzwBSUXPnKf6yikDyEcQr/KByB9OJGhm5ang
 YsT52OpgZTzMXSsGL9RqitvgZtp4vwuDcYjoNafUkNXYHgno6ZojGyVBbypgb4VA
 FiTxoSH0CAD/m/PwVg+k/q0vxca3sFL/l759O55RaNbM7RVuuC6FoNpNvds2q4ch
 l71r5WKEwWBBTy94L4KU/+9RR5CrKmVBF8CqPCP0xE5fm/gYo5j+LFsWgUxYU8Bn
 5hjYboZN1FQJHQve7ErErR7OAf7trHEVVtkuNKMQnu9uU9OgqwS3ReQ2S3c11dsL
 sa0mRL1dPTw55HzRYCV6m0f5TRezuQ==
 =29Vs
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2020-02-06' into staging

nbd patches for 2020-02-06

- Allow setting NBD description from QMP for parity with qemu-nbd
- Remove deprecated 'qemu-nbd --partition'

# gpg: Signature made Thu 06 Feb 2020 12:50:46 GMT
# gpg:                using RSA key 71C2CC22B1C4602927D2F3AAA7A16B4A2527436A
# gpg: Good signature from "Eric Blake <eblake@redhat.com>" [full]
# gpg:                 aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" [full]
# gpg:                 aka "[jpeg image of size 6874]" [full]
# Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2  F3AA A7A1 6B4A 2527 436A

* remotes/ericb/tags/pull-nbd-2020-02-06:
  qemu-nbd: Removed deprecated --partition option
  docs: Fix typo in qemu-nbd -P replacement
  nbd: Allow description when creating NBD blockdev

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-02-06 18:59:12 +00:00
Chen Qun
a661614de1 monitor: fix memory leak in monitor_fdset_dup_fd_find_remove
When remove dup_fd in monitor_fdset_dup_fd_find_remove function,
we need to free mon_fdset_fd_dup. ASAN shows memory leak stack:

Direct leak of 96 byte(s) in 3 object(s) allocated from:
    #0 0xfffd37b033b3 in __interceptor_calloc (/lib64/libasan.so.4+0xd33b3)
    #1 0xfffd375c71cb in g_malloc0 (/lib64/libglib-2.0.so.0+0x571cb)
    #2 0xaaae25bf1c17 in monitor_fdset_dup_fd_add /qemu/monitor/misc.c:1724
    #3 0xaaae265cfd8f in qemu_open /qemu/util/osdep.c:315
    #4 0xaaae264e2b2b in qmp_chardev_open_file_source /qemu/chardev/char-fd.c:122
    #5 0xaaae264e47cf in qmp_chardev_open_file /qemu/chardev/char-file.c:81
    #6 0xaaae264e118b in qemu_char_open /qemu/chardev/char.c:237
    #7 0xaaae264e118b in qemu_chardev_new /qemu/chardev/char.c:964
    #8 0xaaae264e1543 in qemu_chr_new_from_opts /qemu/chardev/char.c:680
    #9 0xaaae25e12e0f in chardev_init_func /qemu/vl.c:2083
    #10 0xaaae26603823 in qemu_opts_foreach /qemu/util/qemu-option.c:1170
    #11 0xaaae258c9787 in main /qemu/vl.c:4089
    #12 0xfffd35b80b9f in __libc_start_main (/lib64/libc.so.6+0x20b9f)
    #13 0xaaae258d7b63  (/qemu/build/aarch64-softmmu/qemu-system-aarch64+0x8b7b63)

Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20200115072016.167252-1-kuhn.chenqun@huawei.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2020-02-06 10:41:45 +01:00
Eric Blake
deb6ccb077 nbd: Allow description when creating NBD blockdev
Allow blockdevs to match the feature already present in qemu-nbd -D.
Enhance iotest 223 to cover it.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191114024635.11363-5-eblake@redhat.com>
2020-02-05 17:22:13 -06:00
Marc-André Lureau
9159015995 qdev: move helper function to monitor/misc
Move the one-user function to the place it is being used.

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200110153039.1379601-5-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-24 20:59:12 +01:00
Peter Maydell
e021e6fe52 QAPI patches for 2020-01-14
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl4dlLoSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTKGoQAKXNP/+ezGJvczU/RVtBhSQXRXQyF+zh
 VFznrB8gL4+MkD20bZv1jhSeNHJgQn4Frarq7IfglNy8NSLOwkVWleY9QFZV+t7U
 puXbO4AfIoMyvKYDEweDaHhAkQ1lnd+lDkN8HPm83EdM9ot+sGmppwnONtJm2xoC
 2/+Ff+A7lmr9mU/+KVMgtnhdu8l/NdSJ4dk3gp0zPqcRtM9PanwBjA4ve+4asBxg
 Hec5lQlqkj09ngNtFMXTQdYvpWXXcKyBwsoJymFh6kSYA7ZACvchfvqq0SS1JQfV
 4yCBfro64ZwUeWuwD5Blzb5iwrrVURRm2ecLq9uy62xmEqX72OWpl1h2+Q2HBZoZ
 rSbo85PJ2DTGNK+xRyRF6N7E1RGlVD4tIcE0nH/+JfW1Fkf7wCGe7AR7ywXScDav
 nW9UtpwPMLYHz/jO0khYAlpfY+SGtO7JFokv7R+9Zpi9IFUziyY9Y74/EIUDE8QV
 vk/GFbGPDUg1+aZgI3Q2/iPmgXDYWZIoBNhmebI8jwNktIyCCGWL07/I6jOX8K+/
 f1njp4Bma8sFm1xoSwgJqams1SsuXdKj33V0k1Yw88RvprXBsRRMHBVtlz443/gh
 LtKGgqJMCU+uuDIJBZ7t1r/iNY+2bgsrgPVNf9AMtPoY+A0dP4FiUuGKEY3fkCAy
 h8WF8U/rkJ4/
 =iRJu
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-01-14' into staging

QAPI patches for 2020-01-14

# gpg: Signature made Tue 14 Jan 2020 10:15:22 GMT
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2020-01-14:
  qapi: Simplify QAPISchemaModularCVisitor
  qapi: Fix code generation for empty modules
  qapi: Proper intermediate representation for modules
  qapi: Generate command registration stuff into separate files
  tests/Makefile.include: Fix missing test-qapi-emit-events.[ch]
  qapi: Tweak "command returns a nice type" check for clarity

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-01-14 16:42:27 +00:00
Markus Armbruster
00ca24ff9e qapi: Generate command registration stuff into separate files
Having to include qapi-commands.h just for qmp_init_marshal() is
suboptimal.  Generate it into separate files.  This lets
monitor/misc.c, qga/main.c, and the generated qapi-commands-FOO.h
include less.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191120182551.23795-4-armbru@redhat.com>
[Typos in docs/devel/qapi-code-gen.txt fixed]
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-01-14 11:01:58 +01:00
Philippe Mathieu-Daudé
083b266f69 chardev: Use QEMUChrEvent enum in IOEventHandler typedef
The Chardev events are listed in the QEMUChrEvent enum.

By using the enum in the IOEventHandler typedef we:

- make the IOEventHandler type more explicit (this handler
  process out-of-band information, while the IOReadHandler
  is in-band),
- help static code analyzers.

This patch was produced with the following spatch script:

  @match@
  expression backend, opaque, context, set_open;
  identifier fd_can_read, fd_read, fd_event, be_change;
  @@
  qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
                           be_change, opaque, context, set_open);

  @depends on match@
  identifier opaque, event;
  identifier match.fd_event;
  @@
   static
  -void fd_event(void *opaque, int event)
  +void fd_event(void *opaque, QEMUChrEvent event)
   {
   ...
   }

Then the typedef was modified manually in
include/chardev/char-fe.h.

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-08 11:15:35 +01:00
Philippe Mathieu-Daudé
4904ca6a7e monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit an event ignored by this frontend, to silent the
following GCC warning:

    CC      monitor/hmp.o
  monitor/hmp.c: In function ‘monitor_event’:
  monitor/hmp.c:1330:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
   1330 |     switch (event) {
        |     ^~~~~~
  cc1: all warnings being treated as errors

Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-13-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-07 16:22:56 +01:00
Philippe Mathieu-Daudé
ed7c5bb7ad monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:

    CC      monitor/qmp.o
  monitor/qmp.c: In function ‘monitor_qmp_event’:
  monitor/qmp.c:345:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
    345 |     switch (event) {
        |     ^~~~~~
  monitor/qmp.c:345:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
  monitor/qmp.c:345:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
  cc1: all warnings being treated as errors

Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191218172009.8868-12-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-01-07 16:22:56 +01:00
Peter Maydell
1010af540b Block layer patches:
- qemu-img: fix info --backing-chain --image-opts
 - Error out on image creation with conflicting size options
 - Fix external snapshot with VM state
 - hmp: Allow using qdev ID for qemu-io command
 - Misc code cleanup
 - Many iotests improvements
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJd+7H/AAoJEH8JsnLIjy/WwIoP/igzSCfiH7yOzWexk7J7DUh7
 SplXRiBQSQAZ8KD2umUk80UO6/W19rHAl3bLLu50D5uzQ5PNz1wSW2S81JZsj0nQ
 ErUEr5yxLGAI/zHIw/LrjUSEygbqcZ21R7foNmIy3lInEXf6gGwPQEnZnZgGkH0x
 v5jwv1HpUpEyetnHunX2cK3JpSNEJCYsV+X1nzDwhjYFuGQq0nlhgUZ8BDt6+fEr
 b/S3TuHmj/FXMH+5wrSr0LiCKaIyAwPdREvC+61aklMNFuA8YwF33tOaJLoWeQCD
 qhxFA8jVd8b3dQ0NZXXbliXST5d6AzjpeqbNzsyKze1duVfcfF1RYsC6McojpQ7f
 9qFIXPC9IHe3sNkUZpTtvONLnmCeHTc9lwVIyVp9B5KXcmcLedvYM04WqhZ+/eeJ
 BfgCvXOyF9sL2GaVPFD+98E2DOYG4dI4rmzqn98kQj+RAXDFvvJ+zxuDUC9omE6T
 pVvxczGPXmnxP2ITRNljJyLVCN1YgE2g9S0GAXNM2i4uOXvhFToEwrJLFytVeVsw
 UwtYkE0F8KJyqjje5N3HiXclBVa++PK3+jjNFA+3B6XZ9wcZZRS2ZXmzsyNOJ7qG
 AeIPtrqBCz+QKsHtmS9CwYpvLrPafobHA3WS2z0dsevcWBHYBQBEM2EgXRFC3N3a
 mymYGxMOsG6+8onwqwjJ
 =laVP
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging

Block layer patches:

- qemu-img: fix info --backing-chain --image-opts
- Error out on image creation with conflicting size options
- Fix external snapshot with VM state
- hmp: Allow using qdev ID for qemu-io command
- Misc code cleanup
- Many iotests improvements

# gpg: Signature made Thu 19 Dec 2019 17:23:11 GMT
# gpg:                using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* remotes/kevin/tags/for-upstream: (30 commits)
  iotests: Test external snapshot with VM state
  hmp: Allow using qdev ID for qemu-io command
  block: Activate recursively even for already active nodes
  iotests: 211: Remove duplication with VM.blockdev_create()
  iotests: 207: Remove duplication with VM.blockdev_create()
  iotests: 266: Convert to VM.blockdev_create()
  iotests: 237: Convert to VM.blockdev_create()
  iotests: 213: Convert to VM.blockdev_create()
  iotests: 212: Convert to VM.blockdev_create()
  iotests: 210: Convert to VM.blockdev_create()
  iotests: 206: Convert to VM.blockdev_create()
  iotests: 255: Drop blockdev_create()
  iotests: Create VM.blockdev_create()
  qcow2: Move error check of local_err near its assignment
  iotests: Fix IMGOPTSSYNTAX for nbd
  iotests/273: Filter format-specific information
  iotests: Add more "_require_drivers" checks to the shell-based tests
  MAINTAINERS: fix qcow2-bitmap.c under Dirty Bitmaps header
  qcow2: Use offset_into_cluster()
  iotests: Support job-complete in run_job()
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20 18:25:32 +00:00
Peter Maydell
8e5943260a Trivial fixes (20191218)
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAl36IvISHGxhdXJlbnRA
 dml2aWVyLmV1AAoJEPMMOL0/L748EwAP/iSmqBVRFbiXGC5Cjy9h93HyOSbysV1P
 cTGmQjJJiLaLAjhbc1AmDk1bc9RPdrcwU69jPAYSb7qedIt9sHPoDJ6tvNVwgTbh
 JRw+Erw4gH10qfGQc/uqG5StgKb5ASrcfBFQwXESBDfkfu1qLbugf6yFOUbYK8Ii
 5DR+n0lDflcORHq+FdjtVR+rVrTdvVc7djAY/2zM+PKHHnPpwdElCI6AVtdmo0/J
 gFMibQ8UrcoV/gkl/H22hbP0mdtM0Sn6uRLlp96Y2DhVqObRLZxDEk+IdOhb64Go
 HQflV8+QB3MhbGrhAzP2bNBZ90BuBps10oeUbWqMkquA4jZMI5dVokqUb4GH0/NA
 BmGGxmKeslxao8dfoxC167n9W1ZIc5jTQ+96rOPKPhSabhlKwdb1M0VJnKDA5b6L
 m6NLgMCkD47SrrrrAyFLFLK6pVhrq7XU5LCnCu4jktXbr4rIfXp+ze7nWy0PPs/5
 fw1HaBc2OxiNjdjqlgRbH9xg1cs0V/EMUMK6+uVuqv58Wx5T6npoVv1ii7S++20e
 2y0NNvCENtb3T2ArjP9C+h7eWYt4nb9/ScfZZASfKE3nbqSJQ2RoBla4437MvMJN
 28oXuNmKPhIDs+MPGjPkcfYRNt7jC0VOyaOIyFBpYEieEoi8AEUjxtCJ/0Q/VjjN
 z+flAszMLvq+
 =RmLy
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging

Trivial fixes (20191218)

# gpg: Signature made Wed 18 Dec 2019 13:00:34 GMT
# gpg:                using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg:                issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg:                 aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg:                 aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F  5173 F30C 38BD 3F2F BE3C

* remotes/vivier2/tags/trivial-branch-pull-request:
  qemu-doc: Remove the unused "Guest Agent" node
  Revert "qemu-options.hx: Update for reboot-timeout parameter"
  target/sparc: Remove old TODO file
  test-keyval: Tighten test of trailing crap after size
  util/cutils: Turn FIXME comment into QEMU_BUILD_BUG_ON()
  monitor: Remove unused define
  MAINTAINERS: Add hw/sd/ssi-sd.c in the SD section

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20 12:46:10 +00:00
Peter Maydell
4800819827 * More uses of RCU_READ_LOCK_GUARD (Dave, myself)
* QOM doc improvments (Greg)
 * Cleanups from the Meson conversion (Marc-André)
 * Support for multiple -accel options (myself)
 * Many x86 machine cleanup (Philippe, myself)
 * tests/migration-test cleanup (Juan)
 * PC machine removal and next round of deprecation (Thomas)
 * kernel-doc integration (Peter, myself)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJd+YJGAAoJEL/70l94x66D0YYIAIZpS6i6NYJC8KHCl49fjI7U
 qHDN7MiKYTU+l3i0+iGmQL6XN5ClAY0pXkY5LBFIDpsohHR5f4jdrIKjyvcHzuIM
 gx/NLsiA45/niHYrn/hEo0P7CwGTrrdWL+SVmScnKcwYiBzMO/uYblxlbUBKLPNn
 eGaKQmEkvlUBR9GS6S1+jYg8234ZRZ4+12t5dqqADBQ7Kc0wn6KC5yebIoQxCgVc
 9F5Ezdkl7befrTI7El3EC6aT18bKhIBZIs1PT/hzqzlGFhBuKM7uKDb43Yx8c7XQ
 bk5vzHmblPAgQyK4OETQ+DM745AOk6vBiJZbR9nrDUXWvUkrEXTQZMJKU0FXdlE=
 =hyYX
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging

* More uses of RCU_READ_LOCK_GUARD (Dave, myself)
* QOM doc improvments (Greg)
* Cleanups from the Meson conversion (Marc-André)
* Support for multiple -accel options (myself)
* Many x86 machine cleanup (Philippe, myself)
* tests/migration-test cleanup (Juan)
* PC machine removal and next round of deprecation (Thomas)
* kernel-doc integration (Peter, myself)

# gpg: Signature made Wed 18 Dec 2019 01:35:02 GMT
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (87 commits)
  vga: cleanup mapping of VRAM for non-PCI VGA
  hw/display: Remove "rombar" hack from vga-pci and vmware_vga
  hw/pci: Remove the "command_serr_enable" property
  hw/audio: Remove the "use_broken_id" hack from the AC97 device
  hw/i386: Remove the deprecated machines 0.12 up to 0.15
  hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge
  hw/pci-host/i440fx: Extract the IGD passthrough host bridge device
  hw/pci-host/i440fx: Use definitions instead of magic values
  hw/pci-host/i440fx: Use size_t to iterate over ARRAY_SIZE()
  hw/pci-host/i440fx: Extract PCII440FXState to "hw/pci-host/i440fx.h"
  hw/pci-host/i440fx: Correct the header description
  Fix some comment spelling errors.
  target/i386: remove unused pci-assign codes
  WHPX: refactor load library
  migration: check length directly to make sure the range is aligned
  memory: include MemoryListener documentation and some missing function parameters
  docs: add memory API reference
  memory.h: Silence kernel-doc complaints
  docs: Create bitops.rst as example of kernel-docs
  bitops.h: Silence kernel-doc complaints
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-12-20 11:20:25 +00:00
Kevin Wolf
89b6fc4561 hmp: Allow using qdev ID for qemu-io command
In order to issue requests on an existing BlockBackend with the
'qemu-io' HMP command, allow specifying the BlockBackend not only with a
BlockBackend name, but also with a qdev ID/QOM path for a device that
owns the (possibly anonymous) BlockBackend.

Because qdev names could be conflicting with BlockBackend and node
names, introduce a -d option to explicitly address a device. If the
option is not given, a BlockBackend or a node is addressed.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-12-19 18:04:25 +01:00
Yury Kotov
f8b345e414 monitor: Remove unused define
Remove the definition of QMP_ACCEPT_UNKNOWNS as it is unused since
refactoring 5c678ee8d9

Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191119110709.13827-1-yury-kotov@yandex-team.ru>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-12-18 12:20:25 +01:00
Vladimir Sementsov-Ogievskiy
ec48595e2d monitor/qmp-cmds: rename Error ** parameter to more common errp
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-14-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18 08:43:19 +01:00
Vladimir Sementsov-Ogievskiy
187c614767 hmp: drop Error pointer indirection in hmp_handle_error
We don't need Error **, as all callers pass local Error object, which
isn't used after the call. Use Error * instead.

Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191205174635.18758-5-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-12-18 08:36:16 +01:00
Marc-André Lureau
a85d0bf361 monitor: fix maybe-uninitialized
../monitor/misc.c: In function ‘mon_get_cpu_sync’:
/home/elmarco/src/qq/include/sysemu/hw_accel.h:22:9: error: ‘cpu’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
   22 |         kvm_cpu_synchronize_state(cpu);
      |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../monitor/misc.c:397:15: note: ‘cpu’ was declared here
  397 |     CPUState *cpu;
      |               ^~~

Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-12-17 19:32:47 +01:00
Wolfgang Bumiller
2895aaa139 monitor/qmp: resume monitor when clearing its queue
When a monitor's queue is filled up in handle_qmp_command()
it gets suspended. It's the dispatcher bh's job currently to
resume the monitor, which it does after processing an event
from the queue. However, it is possible for a
CHR_EVENT_CLOSED event to be processed before before the bh
is scheduled, which will clear the queue without resuming
the monitor, thereby preventing the dispatcher from reaching
the resume() call.
Any new connections to the qmp socket will be accept()ed and
show the greeting, but will not respond to any messages sent
afterwards (as they will not be read from the
still-suspended socket).
Fix this by resuming the monitor when clearing a queue which
was filled up.

Signed-off-by: Wolfgang Bumiller <w.bumiller@proxmox.com>
Message-Id: <20191115085914.21287-1-w.bumiller@proxmox.com>
2019-11-19 08:21:47 +01:00
Wei Yang
038adc2f58 core: replace getpagesize() with qemu_real_host_page_size
There are three page size in qemu:

  real host page size
  host page size
  target page size

All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().

qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.

[Note] Not fully tested for some arch or device.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-10-26 15:38:06 +02:00
Peter Maydell
f3b8f18ebf Monitor patches for 2019-08-21
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl1dZKsSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTJ4QP/10izA+dSofQ9404GRq3TNzwRCKugU44
 nES9CqDh6x5emx+ADQWYkugblgfH9GOvUaAUNtY+uFaEr55yC/F+VWeVXvyjt5U6
 ZpPZqIRDOHo2+PZrddr/KcKmiomS6plz03m9bzb3pYN1yIl2ZzgClAhAqWQLk0WB
 wwiY+YsJ83YR4sdiRMZkuF+UL7N8fSqYvIIj0yzM8+8ONDor9n16PoPeFg3JSsyG
 aMxXIUnSBZAVtClaNkUPtS0Wf9XEuqoG1rvMRV4Vv+eeb7fwA414DqanRJdLlGMA
 yNRtFcVyztCfjgVEXnY9JJlFe6pDkoe8ycoimQ4YA60C9c1DIMHqyjFWXRHfDwk8
 bYMSX6CTpfoEvbTfmwqYR6KSkb/KuXiFDmcYlTYFvIt3grhhdHQbru9vy+E5sm/b
 j3CPV2DTCkeGY+oZFfKIaQT9yoWZOhmMY5doMTYyinXygPTGQROUrHtzUeRXKmJZ
 arqDRmh+mlEiGETNeYQCI45eYCSDYxO+UNrhszxhmv6B1+ixhIrV2oXhi61vVBeY
 yngY4EILbuA2Z/E4BevJk91ESWJTr3UP13c6p7yf21iN4BD1KkHy5HoXCgYfQDeV
 4kar49g6WQ/VQEiwhi65Xd0OwstynkcV69F+kMagVMgaLeRsdU5ikGJQzxTeWJRl
 SPpc7oDwuAS+
 =2F3E
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-08-21' into staging

Monitor patches for 2019-08-21

# gpg: Signature made Wed 21 Aug 2019 16:35:07 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2019-08-21:
  monitor/qmp: Update comment for commit 4eaca8de26
  qdev: Collect HMP handlers command handlers in qdev-monitor.c
  qapi: Move query-target from misc.json to machine.json
  hw/core: Move cpu.c, cpu.h from qom/ to hw/core/

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-22 10:31:21 +01:00
Markus Armbruster
eb707eac58 monitor/qmp: Update comment for commit 4eaca8de26
Commit 4eaca8de26 dropped monitor_qmp_respond()'s parameter @id
without updating its function comment.  Fix that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190816193305.12090-1-armbru@redhat.com>
2019-08-21 17:33:38 +02:00
Markus Armbruster
d94bd0927e qdev: Collect HMP handlers command handlers in qdev-monitor.c
Move hmp_device_add(), hmp_device_del() from monitor/hmp-cmds.c to
qdev-monitor.c, where they are covered by MAINTAINERS section "QOM",
just like qapi/qdev.json.  hmp_info_qtree() and hmp_info_qdm() are
already there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190709185936.31335-1-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-21 13:24:01 +02:00
Kővágó, Zoltán
f0b9f36d71 audio: add audiodev property to vnc and wav_capture
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 8cbc9e865bbf40850c14340fc0549e6ac2d5fe9c.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 09:13:37 +02:00
Kővágó, Zoltán
ecd97e9592 audio: basic support for multi backend audio
Audio functions no longer access glob_audio_state, instead they get an
AudioState as a parameter.  This is required in order to support
multiple backends.

glob_audio_state is also gone, and replaced with a tailq so we can store
more than one states.

Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com>
Message-id: 67aef54f9e729a7160fe95c465351115e392164b.1566168923.git.DirtY.iCE.hu@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-21 09:13:37 +02:00
Peter Maydell
95a9457fd4 Header cleanup patches for 2019-08-13
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl1WleASHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTBBYQALQLzIYb2Zux95bAxoJdhqNuEOGLfxeu
 gx0i0roPe6SBleHozUK+gf7kVYyw7he58n2dZURGqrpqktgZOFcea2a6Dq1rnVw6
 JMJ2Oy7V326bHwJT0Np9rW4n+FHsMQZoAUEHjl9EeGCZfO/zy2aSWPsD8mbcbm0g
 hUW5Jr4+cpm28BCL8I+2HhWFazB6G2IPAF9oEXmNsOM6J1Ho8WGrTAjASe0Il5Yi
 m2B4QWG+4uz77WYnkttnssm41K1S95HYyaKluIVyNwTnsPTN303V/sUj+wdRaooL
 k1O6WqaavGhal7QeRqy+vCpF8m6qLq7NaYCzSCOrrkkuC8TAnpVn7Xmi9qI+vb6O
 kGBpDWhq5wOnphsEhnFvhPZgD+WZo3mwTgW4h0d3UhB6orOTPTMvWKEwFJ1j/O6/
 gntV61o542c9gpZjS133221HRmNjteHF/5/TFzmX/G50sgivJn+WOP87naM2aBAz
 8MW5HatTox+qQqYD4VMUIVnVkguxHDVhFRBunYu0HvZZ1Rud+Lc6Xzi6H4jDlZ81
 vtOmAlMU3dbp97gNvJrAVqV4JIL3puOWbu0MMaQWoG53Kcdfu46LIr57TTg3dw61
 R9e7HSOQjYILChoodwELlyeAsVeZo3IzX9vPX8aw7MoHvneyTUNqtha/rHsLEwsb
 97G19dydGEC6
 =eSUz
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-include-2019-08-13-v2' into staging

Header cleanup patches for 2019-08-13

# gpg: Signature made Fri 16 Aug 2019 12:39:12 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-include-2019-08-13-v2: (29 commits)
  sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
  sysemu: Move the VMChangeStateEntry typedef to qemu/typedefs.h
  Include sysemu/sysemu.h a lot less
  Clean up inclusion of sysemu/sysemu.h
  numa: Move remaining NUMA declarations from sysemu.h to numa.h
  Include sysemu/hostmem.h less
  numa: Don't include hw/boards.h into sysemu/numa.h
  Include hw/boards.h a bit less
  Include hw/qdev-properties.h less
  Include qemu/main-loop.h less
  Include qemu/queue.h slightly less
  Include hw/hw.h exactly where needed
  Include qom/object.h slightly less
  Include exec/memory.h slightly less
  Include migration/vmstate.h less
  migration: Move the VMStateDescription typedef to typedefs.h
  Clean up inclusion of exec/cpu-common.h
  Include hw/irq.h a lot less
  typedefs: Separate incomplete types and function types
  ide: Include hw/ide/internal a bit less outside hw/ide/
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-16 14:53:43 +01:00
Markus Armbruster
54d31236b9 sysemu: Split sysemu/runstate.h off sysemu/sysemu.h
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator.  Evidence:

* It's included widely: in my "build everything" tree, changing
  sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
  objects (not counting tests and objects that don't depend on
  qemu/osdep.h, down from 5400 due to the previous two commits).

* It pulls in more than a dozen additional headers.

Split stuff related to run state management into its own header
sysemu/runstate.h.

Touching sysemu/sysemu.h now recompiles some 850 objects.  qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200.  Touching new sysemu/runstate.h recompiles some 500 objects.

Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
2019-08-16 13:37:36 +02:00
Markus Armbruster
d5938f29fe Clean up inclusion of sysemu/sysemu.h
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).

Almost a third of its inclusions are actually superfluous.  Delete
them.  Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.

hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it.  The compiler is cool with that, but include it anyway.

This doesn't reduce actual use much, as it's still included into
widely included headers.  The next commit will tackle that.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16 13:31:53 +02:00
Markus Armbruster
12e9493df9 Include hw/boards.h a bit less
hw/boards.h pulls in almost 60 headers.  The less we include it into
headers, the better.  As a first step, drop superfluous inclusions,
and downgrade some more to what's actually needed.  Gets rid of just
one inclusion into a header.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-23-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
2019-08-16 13:31:53 +02:00
Markus Armbruster
650d103d3e Include hw/hw.h exactly where needed
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).

The previous commits have left only the declaration of hw_error() in
hw/hw.h.  This permits dropping most of its inclusions.  Touching it
now recompiles less than 200 objects.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-16 13:31:52 +02:00
Markus Armbruster
2ae16a6aa4 Include generated QAPI headers less
Some of the generated qapi-types-MODULE.h are included all over the
place.  Changing a QAPI type can trigger massive recompiling.  Top
scorers recompile more than 1000 out of some 6600 objects (not
counting tests and objects that don't depend on qemu/osdep.h):

    6300 qapi/qapi-builtin-types.h
    5700 qapi/qapi-types-run-state.h
    3900 qapi/qapi-types-common.h
    3300 qapi/qapi-types-sockets.h
    3000 qapi/qapi-types-misc.h
    3000 qapi/qapi-types-crypto.h
    3000 qapi/qapi-types-job.h
    3000 qapi/qapi-types-block-core.h
    2800 qapi/qapi-types-block.h
    1300 qapi/qapi-types-net.h

Clean up headers to include generated QAPI headers only where needed.
Impact is negligible except for hw/qdev-properties.h.

This header includes qapi/qapi-types-block.h and
qapi/qapi-types-misc.h.  They are used only in expansions of property
definition macros such as DEFINE_PROP_BLOCKDEV_ON_ERROR() and
DEFINE_PROP_OFF_AUTO().  Moving their inclusion from
hw/qdev-properties.h to the users of these macros avoids pointless
recompiles.  This is how other property definition macros, such as
DEFINE_PROP_NETDEV(), already work.

Improves things for some of the top scorers:

    3600 qapi/qapi-types-common.h
    2800 qapi/qapi-types-sockets.h
     900 qapi/qapi-types-misc.h
    2200 qapi/qapi-types-crypto.h
    2100 qapi/qapi-types-job.h
    2100 qapi/qapi-types-block-core.h
     270 qapi/qapi-types-block.h

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-3-armbru@redhat.com>
2019-08-16 13:31:51 +02:00
Wei Yang
32e70aad7e hmp: Remove migration capabilities from "info migrate"
With the growth of migration capabilities, it is not proper to display
them in "info migrate". Users are recommended to use "info
migrate_capabiltiies" to list them.

Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>

Message-Id: <20190806003645.8426-1-richardw.yang@linux.intel.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-08-14 17:33:14 +01:00
Christophe de Dinechin
ea73f37062 Fix build error when VNC is configured out
In hmp_change(), the variable hmp_mon is only used
by code under #ifdef CONFIG_VNC. This results in a build
error when VNC is configured out with the default of
treating warnings as errors:

monitor/hmp-cmds.c: In function ‘hmp_change’:
monitor/hmp-cmds.c:1946:17: error: unused variable ‘hmp_mon’ [-Werror=unused-variable]
1946 |     MonitorHMP *hmp_mon = container_of(mon, MonitorHMP, common);
     |                 ^~~~~~~

Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Message-Id: <20190625123905.25434-1-dinechin@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-07-15 11:26:26 +01:00
Peter Maydell
c35d17cabc virtio, pc, pci: features, fixes, cleanups
virtio-pmem support.
 libvhost user mq support.
 A bunch of fixes all over the place.
 
 Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQEbBAABAgAGBQJdHmkBAAoJECgfDbjSjVRpEAIH+Kmy8n5Et9NzsnmNqHAiC/pg
 3V5wGyp9M4ZJVPXC0z/Q1sYJ3YYP6dBd4tjj2/7LzYZSlqlQIs83UlQCo0XTiliH
 /jZD/IaAZABnfB7vAeZW67WNT2a20xG2Jr83083lSaDUI/pfIdvbMelIbBLmo/kd
 tWdAAWT0kcGYjyz4xQQgtAH6zAQUleKE7ECUJ2TpJQbSMLxdI/YTaoYqek471YdP
 ju5OLBO3WbNkSE9JYz4MJqTudYK0sKu568UqBVF8JdpFd5Cv+X/OI+bCsc4QK8KN
 DTtFVVvbm1KGPSceqc9rwsDjO4Wd8ThvuZxrB029AahD6vT82F13IHpi/S29Fw==
 =WAFb
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

virtio, pc, pci: features, fixes, cleanups

virtio-pmem support.
libvhost user mq support.
A bunch of fixes all over the place.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 04 Jul 2019 22:00:49 BST
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (22 commits)
  docs: avoid vhost-user-net specifics in multiqueue section
  libvhost-user: implement VHOST_USER_PROTOCOL_F_MQ
  libvhost-user: support many virtqueues
  libvhost-user: add vmsg_set_reply_u64() helper
  pc: Move compat_apic_id_mode variable to PCMachineClass
  virtio: Don't change "started" flag on virtio_vmstate_change()
  virtio: Make sure we get correct state of device on handle_aio_output()
  virtio: Set "start_on_kick" on virtio_set_features()
  virtio: Set "start_on_kick" for legacy devices
  virtio: add "use-started" property
  virtio-pci: fix missing device properties
  pc: Support for virtio-pmem-pci
  numa: Handle virtio-pmem in NUMA stats
  hmp: Handle virtio-pmem when printing memory device infos
  virtio-pci: Proxy for virtio-pmem
  virtio-pmem: sync linux headers
  virtio-pci: Allow to specify additional interfaces for the base type
  virtio-pmem: add virtio device
  pcie: minor cleanups for slot control/status
  pcie: work around for racy guest init
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-05 09:51:50 +01:00
David Hildenbrand
d766b22bbd hmp: Handle virtio-pmem when printing memory device infos
Print the memory device info just like for PCDIMM/NVDIMM.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20190619094907.10131-6-pagupta@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-07-04 17:00:32 -04:00
Peter Maydell
374f63f681 Monitor patches for 2019-07-02
-----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAl0bQhUSHGFybWJydUBy
 ZWRoYXQuY29tAAoJEDhwtADrkYZTOgoP/3v1ZAg4ulTrUx/KO8C80sA3qqaPgkbP
 s8DFUwtjWcDrefGejIep4C0dxhY5vD1oNg9JeK+6O4IInijlg30kildBj85nPa5J
 Z55hZFIGWW1CSMzeSlOMWH1QdYdGPXkGRe8ApXPqRH4VpsdulC+vErQl1YrleNtv
 B8K8402hMOKL+TsheBpdnbM+1hXRj8zBGfobiY/9eLex30uaNDVOd3bIpx0M63fr
 kcwOOPKQeUTLPbUvI6mVQtTkNFCzk6Wmi5vMyT3bSe2ZMLNnEFQZXabcgSBverTK
 9ar5MxTMHIplstWVQEceXN3BLVlIsmunUsuCSHqmX6tdX37EKiJXZImiz0i98bnq
 5SFNAHntr3JDMdqqZJX+v1DvmGbPfv/H5poWk+wQfFBkjDykExEd77v9kuOc4aVZ
 HkEYNbAPVTjfm5xXxn8yXdY++tVsQKV4q2T4OX9WacMu5sJujDm9qIlVaE2A3Cdc
 ePM4tNrHJ0MNDHn2CG/wPEaLelfylLlL/Aai/WQe/YPVrVOHroT4zvwVv6+QJB2k
 MWqmRzGEOYDevPs8PizPetEHiirTHyrIufuleFJglBVSNi5V2LpG5d97Pal0Dn2k
 1ZzSnonXGnhx7VoaqbxhAEj8vAI42gJJ3Q/f6VW2q2rBAv4/oc9jeQVx1SYGFKCu
 QbNALrVpyv+5
 =jtpi
 -----END PGP SIGNATURE-----

Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2019-07-02-v2' into staging

Monitor patches for 2019-07-02

# gpg: Signature made Tue 02 Jul 2019 12:37:57 BST
# gpg:                using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg:                issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-monitor-2019-07-02-v2:
  dump: Move HMP command handlers to dump/
  MAINTAINERS: Add Windows dump to section "Dump"
  dump: Move the code to dump/
  qapi: Split dump.json off misc.json
  qapi: Rename target.json to misc-target.json
  qapi: Split machine-target.json off target.json and misc.json
  hw/core: Collect HMP command handlers in hw/core/
  hw/core: Collect QMP command handlers in hw/core/
  hw/core: Move numa.c to hw/core/
  qapi: Split machine.json off misc.json
  MAINTAINERS: Merge sections CPU, NUMA into Machine core
  qom: Move HMP command handlers to qom/
  qom: Move QMP command handlers to qom/
  qapi: Split qom.json and qdev.json off misc.json
  hmp: Move hmp.h to include/monitor/
  Makefile: Don't add monitor/ twice to common-obj-y
  MAINTAINERS: Make section "QOM" cover qdev as well
  MAINTAINERS: new maintainers for QOM

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-07-03 00:16:43 +01:00
Markus Armbruster
2608b3df8f dump: Move HMP command handlers to dump/
Move the HMP handlers related to qapi/dump.json to
dump/dump-hmp-cmds.c, where they are covered by MAINTAINERS section
"Dump", just like qapi/dump.json.

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-18-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[Commit message typo fixed]
2019-07-02 13:37:00 +02:00
Markus Armbruster
d06b747bd5 qapi: Split dump.json off misc.json
Move commands dump-guest-memory, query-dump,
query-dump-guest-memory-capability with their types from misc.json to
new dump.json.  Add dump.json to MAINTAINERS section "Dump".

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-15-armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02 13:37:00 +02:00
Markus Armbruster
55225c853a hw/core: Collect HMP command handlers in hw/core/
Move the HMP handlers related to qapi/machine.json to
hw/core/machine-hmp-cmds.c, where they are covered by MAINTAINERS
section "Machine core", just like qapi/machine.json.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-07-02 13:37:00 +02:00
Markus Armbruster
52924dea17 hw/core: Collect QMP command handlers in hw/core/
The handlers for qapi/machine.json's QMP commands are spread over
cpus.c, hw/core/numa.c, monitor/misc.c, monitor/qmp-cmds.c, and vl.c.
Move them all to new hw/core/machine-qmp-cmds.c, where they are
covered by MAINTAINERS section "Machine core", just like
qapi/machine.json.

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-11-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02 13:37:00 +02:00
Markus Armbruster
8ac25c8442 qapi: Split machine.json off misc.json
Move commands cpu-add, query-cpus, query-cpus-fast,
query-current-machine, query-hotpluggable-cpus, query-machines,
query-memdev, and set-numa-node with their types from misc.json to new
machine.json.  Also move types X86CPURegister32 and
X86CPUFeatureWordInfo.  Add machine.json to MAINTAINERS section
"Machine core".

Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-9-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02 13:37:00 +02:00
Markus Armbruster
3950a37716 qom: Move HMP command handlers to qom/
Move the HMP command handlers related to QOM handlers from
monitor/hmp-cmds.c and qdev-monitor.c to new qom/qom-hmp-cmds.c, where
they are covered by MAINTAINERS section QOM.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[Also move hmp_info_qom_tree(), tweak commit message accordingly]
2019-07-02 13:36:49 +02:00
Markus Armbruster
cfbe46fcc6 qom: Move QMP command handlers to qom/
The handlers for qapi/qom.json's QMP commands are in
monitor/qmp-cmds.c.  Move them to new qom/qom-qmp-cmds.c, where they
are covered by MAINTAINERS section QOM, just like qapi/qom.json.

Move along qmp_device_list_properties() even though it's specified in
qapi/qdev.json, because it's so similar to qmp_qom_list_properties().

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-6-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-07-02 07:20:08 +02:00
Markus Armbruster
c577ff624f qapi: Split qom.json and qdev.json off misc.json
Move commands object-add, object-del, qom-get, qom-list,
qom-list-properties, qom-list-types, and qom-set with their types from
misc.json to new qom.json.

Move commands device-list-properties, device_add, device-del, and
event DEVICE_DELETED from misc.json to new qdev.json.

Add both new files to MAINTAINERS section QOM.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-5-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Straightforwardly updated for "MAINTAINERS: Make section "QOM" cover
qdev as well"]
2019-07-02 07:19:57 +02:00
Markus Armbruster
275307aaab hmp: Move hmp.h to include/monitor/
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190619201050.19040-4-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-07-02 07:19:45 +02:00
Dr. David Alan Gilbert
c6644548c7 net/announce: Add HMP optional ID
Add the optional ID to the HMP command.

e.g.
   # start an announce for a long time on eth1
   migrate_set_parameter announce-rounds 1000
   announce_self "eth1" e1

   # start an announce on eth2
   announce_self "eth2" e2

   # Change e1 to be announcing on eth1 and eth3
   announce_self "eth1,eth3" e1

   # Cancel e1
   migrate_set_parameter announce-rounds 0
   announce_self "" e1

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02 10:21:07 +08:00
Dr. David Alan Gilbert
0852827115 net/announce: Add HMP optional interface list
Add the optional interface list to the HMP command.

i.e.

   All interfaces
        announce_self

   Just the named interfaces:
        announce_self vn1,vn2

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2019-07-02 10:21:06 +08:00
Vladimir Sementsov-Ogievskiy
68d00e4293 block/block-backend: blk_iostatus_reset: drop usage of bs->job
We are going to remove bs->job pointer. Drop it's usage in
blk_iostatus_reset.

blk_iostatus_reset() has only two callers:

1. blk_attach_dev(). This doesn't have anything to do with jobs and
    attaching a new guest device won't solve any problem the job
    encountered, so no reason to reset the iostatus for the job.

2. qmp_cont(). This resets the iostatus for everything. We can just
    call block_job_iostatus_reset() for all block jobs instead of going
    through BlockBackend.

Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-06-18 16:41:10 +02:00
Kevin Wolf
fbfc29e3bf monitor: Replace monitor_init() with monitor_init_{hmp, qmp}()
Most callers know which monitor type they want to have. Instead of
calling monitor_init() with flags that can describe both types of
monitors, make monitor_init_{hmp,qmp}() public interfaces that take
specific bools instead of flags and call these functions directly.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-15-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-18 08:14:17 +02:00
Kevin Wolf
920824165c monitor: Split Monitor.flags into separate bools
Monitor.flags contains three different flags: One to distinguish HMP
from QMP; one specific to HMP (MONITOR_USE_READLINE) that is ignored
with QMP; and another one specific to QMP (MONITOR_USE_PRETTY) that is
ignored with HMP.

Split the flags field into three bools and move them to the right
subclass. Flags are still in use for the monitor_init() interface.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-14-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-18 08:14:17 +02:00
Kevin Wolf
1d95db745b monitor: Split out monitor/monitor.c
Move the monitor core infrastructure from monitor/misc.c to
monitor/monitor.c. This is code that can be shared for all targets, so
compile it only once.

What remains in monitor/misc.c after this patch is mostly monitor
command implementations (which could move to hmp-cmds.c or qmp-cmds.c
later) and code that requires a system emulator or is even
target-dependent (including HMP command completion code).

The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between all
monitor parts can be cleaned up later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-13-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-18 08:14:17 +02:00
Kevin Wolf
ed7bda5d07 monitor: Split out monitor/hmp.c
Move HMP infrastructure from monitor/misc.c to monitor/hmp.c. This is
code that can be shared for all targets, so compile it only once.

The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between HMP
and the monitor core can be cleaned up later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20190613153405.24769-12-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Comment reformatted to make checkpatch.pl happy, #include <dirent.h>
moved to fix Windows build, superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-18 08:13:13 +02:00
Kevin Wolf
7e3c0deab1 monitor: Split out monitor/qmp.c
Move QMP infrastructure from monitor/misc.c to monitor/qmp.c. This is
code that can be shared for all targets, so compile it only once.

The amount of function and particularly extern variables in
monitor_int.h is probably a bit larger than it needs to be, but this way
no non-trivial code modifications are needed. The interfaces between QMP
and the monitor core can be cleaned up later.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-11-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[monitor_is_qmp() tidied up to make checkpatch.pl happy,
superfluous #include dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17 20:36:56 +02:00
Kevin Wolf
5bce308aaa monitor: Create monitor-internal.h with common definitions
Before we can split monitor/misc.c, we need to create a header file that
contains the common definitions that will be used by multiple source
files.

For a start, add the type definitions for Monitor, MonitorHMP and
MonitorQMP and their dependencies. We'll add functions as needed when
splitting monitor/misc.c.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190613153405.24769-10-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Header guard symbol tidied up, superfluous #include dropped, FIXME in
hmp_change() resolved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17 20:36:56 +02:00
Kevin Wolf
f1b3ccfaa6 monitor: Move {hmp, qmp}.c to monitor/{hmp, qmp}-cmds.c
Now that we have a monitor/ subdirectory, let's move hmp.c and qmp.c
from the root directory there. As they contain implementations of
monitor commands, rename them to {hmp,qmp}-cmds.c, so that {hmp,qmp}.c
are free for the HMP and QMP infrastructure.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-9-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17 20:36:56 +02:00
Kevin Wolf
e84328faa9 Move monitor.c to monitor/misc.c
Create a new monitor/ subdirectory and move monitor.c there. As the plan
is to move the monitor core into separate files, use the chance to
rename it to misc.c.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190613153405.24769-8-kwolf@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17 20:36:56 +02:00