As hinted in the comment at the top of the file, the naming convention for the
APB types/QOM functions isn't correct. As a starting point we can at least
rename the APB type and related functions to improve the readability of apb.c.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Here we rename PBMPCIBridge to SimbaPCIBridge and the QOM type from
TYPE_PBM_PCI_BRIDGE to TYPE_SIMBA_PCI_BRIDGE in improve the clarity
of the device name.
Also touch up the relevant spots in apb.c and various other function
names as appropriate.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
Move the QOM type and macros into a new include/hw/pci-bridge/simba.h
file, and add a new CONFIG_SIMBA Makefile.objs variable which is enabled
for sparc64-softmmu builds only.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Michael S. Tsirkin <mst@redhat.com>
CC: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com>
With the LEON3 IRQ controller IRQs can be acknowledged 2 ways:
* Explicitly by software writing to the CLEAR_OFFSET register
* Implicitly when the procesor is done running the trap handler attached
to the IRQ.
The actual IRQMP code only allows the implicit processor triggered IRQ ack.
If software write explicitly to the CLEAR_OFFSET register, this will clear
the pending bit in the register value but this will not lower the ongoing
raised IRQ with the processor. The IRQ will be kept raised to the LEON
processor until the related trap handler is run and the processor implicitly
ack the interrupt. So with the actual IRQMP code trap handler have to be run
even if the software has already done its job by clearing the pending bit.
This feature has been tested on another LEON3 simulator (tsim_leon3 from
Gaisler) and it turns out that the Qemu implementation is not equivalent to
the tsim one. In tsim, if software does clear a pending interrupt before
the related interrupt handler is triggered the said interrupt handler will
not be called.
This patch brings the Qemu IRQMP implementation in line with the tsim
implementation by allowing IRQ to be acknowledged by software only.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
This reverts commit f87d72f5c5 as that is
part of a patchset reported to break cleanup and migration.
Cc: Gal Hammer <ghammer@redhat.com>
Cc: Sitong Liu <siliu@redhat.com>
Cc: Xiaoling Gao <xiagao@redhat.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
This reverts commit 4fe6d78b2e as it is
reported to break cleanup and migration.
Cc: Gal Hammer <ghammer@redhat.com>
Cc: Sitong Liu <siliu@redhat.com>
Cc: Xiaoling Gao <xiagao@redhat.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
This reverts commit 6f0bb23072.
This reverts commit f87d72f5c5 as that is
reported to break cleanup and migration.
Cc: Gal Hammer <ghammer@redhat.com>
Cc: Sitong Liu <siliu@redhat.com>
Cc: Xiaoling Gao <xiagao@redhat.com>
Suggested-by: Greg Kurz <groug@kaod.org>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Jose Ricardo Ziviani <joserz@linux.vnet.ibm.com>
Reported-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
v2:
* Drop merge failure from a previous pull request that broke virtio-blk on ARM
guests
* Add Parallels XML patch series
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaZgqoAAoJEJykq7OBq3PIwNIIAKD8OwjeQdtznD88ikMGd5CF
PvBHOIXIX7GCaKdAFEP1MMB0xaTN93zhphPZfcQxnnbi2LrnzuP2WCSunKPPcGQJ
ToMRxYV+OkS0Rm8/us9fQpmBf2PKouIlNXP4jZZuEYAmyZgoU7YBQHYP1sw2K6RE
MHPBdKMKzb+S8u+HBx+oy1LQ0cKKRjCYXhdQ4p7rlWkXc5irQQh9d12W/EHS++cd
5wgX5V3aj4rXD4XwXY/kgDXtSG37sgNOHx77W7gDO3KuBolEBVvPvbP7yrCZzfcC
pGLPKwXnHTxOKlwLQ0weD+uIsJWv6XGKLhgX+MFWCVU1PvPuSTWcqfBplgTUU6s=
=mjmD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
v2:
* Drop merge failure from a previous pull request that broke virtio-blk on ARM
guests
* Add Parallels XML patch series
# gpg: Signature made Mon 22 Jan 2018 16:00:40 GMT
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
block/parallels: add backing support to readv/writev
block/parallels: replace some magic numbers
block/parallels: move some structures into header
configure: add dependency
docs/interop/prl-xml: description of Parallels Disk format
block: add block_set_io_throttle virtio-blk-pci QMP example
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is needed for new architectures like RISC-V which do not provide any
other rename-like syscall.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvm607su9qs.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
If multiple guest threads in user-mode emulation write to a
page which QEMU has marked read-only because of cached TCG
translations, the threads can race in page_unprotect:
* threads A & B both try to do a write to a page with code in it at
the same time (ie which we've made non-writeable, so SEGV)
* they race into the signal handler with this faulting address
* thread A happens to get to page_unprotect() first and takes the
mmap lock, so thread B sits waiting for it to be done
* A then finds the page, marks it PAGE_WRITE and mprotect()s it writable
* A can then continue OK (returns from signal handler to retry the
memory access)
* ...but when B gets the mmap lock it finds that the page is already
PAGE_WRITE, and so it exits page_unprotect() via the "not due to
protected translation" code path, and wrongly delivers the signal
to the guest rather than just retrying the access
In particular, this meant that trying to run 'javac' in user-mode
emulation would fail with a spurious guest SIGSEGV.
Handle this by making page_unprotect() assume that a call for a page
which is already PAGE_WRITE is due to a race of this sort and return
a "fault handled" indication.
Since this would cause an infinite loop if we ever called
page_unprotect() for some other kind of fault than "write failed due
to bad access permissions", tighten the condition in
handle_cpu_signal() to check the signal number and si_code, and add a
comment so that if somebody does ever find themselves debugging an
infinite loop of faults they have some clue about why.
(The trick for identifying the correct setting for
current_tb_invalidated for thread B (needed to handle the precise-SMC
case) is due to Richard Henderson. Paolo Bonzini suggested just
relying on si_code rather than trying anything more complicated.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1511879725-9576-3-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Currently all the architecture/OS specific cpu_signal_handler()
functions call handle_cpu_signal() without passing it the
siginfo_t. We're going to want that so we can look at the si_code
to determine whether this is a SEGV_ACCERR access violation or
some other kind of fault, so change the functions to pass through
the pointer to the siginfo_t rather than just the si_addr value.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1511879725-9576-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
linux-user binaries don't need firmware and NMI,
so don't add them in this case, move QDEV
firmware functions to qdev-fw.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20171103193802.11876-1-laurent@vivier.eu>
Signed-off-by: Marco A L Barbosa <malbarbo@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180111183714.22834-2-malbarbo@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
sched_get/setaffinity linux-user syscalls were missing conversions for
little/big endian, which is hairy since longs may not be the same size
either.
For simplicity, this just introduces loops to convert bit by bit like is
done for select.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180109201643.1479-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
mmap() is required by the linux kernel ABI and POSIX to return a
non-NULL address when the implementation chooses a start address for the
mapping.
The current implementation of mmap_find_vma_reserved() can return NULL
as start address of a mapping which leads to subsequent crashes inside
the guests glibc, e.g. output of qemu-arm-static --strace executing a
test binary stx_test:
1879 mmap2(NULL,8388608,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANONYMOUS|0x20000,-1,0) = 0x00000000
1879 write(2,0xf6fd39d0,79) stx_test: allocatestack.c:514: allocate_stack: Assertion `mem != NULL' failed.
This patch fixes mmap_find_vma_reserved() by skipping NULL as start
address while searching for a suitable mapping start address.
CC: Riku Voipio <riku.voipio@iki.fi>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Maximilian Riemensberger <riemensberger@cadami.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1515286904-86418-1-git-send-email-riemensberger@cadami.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The third argument to dup3() is a flags word which may be
O_CLOEXEC. We weren't translating this flag from target to
host value, which meant that if the target used a different
value from the host (eg sparc guest and x86 host) the dup3()
call would fail EINVAL. Do the correct translation.
Fixes: https://bugs.launchpad.net/qemu/+bug/1704658
Reported-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1513351080-25917-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Linux struct cmsghdr is already guaranteed to be sufficiently
aligned that CMSG_ALIGN(sizeof struct cmsghdr) is always equal
to sizeof struct cmsghdr. Stop doing the unnecessary alignment
arithmetic for host and target cmsghdr.
This follows kernel commit 1ff8cebf49ed9e9ca2 and brings our
TARGET_CMSG_* macros back into line with the kernel ones,
as well as making them easier to understand.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1513345976-22958-3-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The handling of length calculations in host_to_target_cmsg()
was rather confused:
* when checking for whether the target cmsg header fit in
the remaining buffer, we were using the host struct size,
not the target size
* we were setting tgt_len to "target payload + header length"
but then using it as if it were the target payload length alone
* in various message type cases we weren't handling the possibility
that host or target buffers were truncated
Fix these problems. The second one in particular is liable
to result in us overrunning the guest provided buffer,
since we will try to convert more data than is actually
present.
Fixes: https://bugs.launchpad.net/qemu/+bug/1701808
Reported-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1513345976-22958-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When we do a fork() in usermode emulation, we need to be in
a start/end exclusive section, so that we can ensure that no
other thread is in an RCU section. Otherwise you can get this
deadlock:
- fork thread: has mmap_lock, waits for rcu_sync_lock
(because rcu_init_lock() is registered as a pthread_atfork() hook)
- RCU thread: has rcu_sync_lock, waits for rcu_read_(un)lock
- another CPU thread: in RCU critical section, waits for mmap_lock
This can show up if you have a heavily multithreaded guest program
that does a fork().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Stuart Monteith <stuart.monteith@linaro.org>
Message-Id: <1512650481-1723-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our locking order is that the tb lock should be taken
inside the mmap_lock, but fork_start() grabs locks the
other way around. This means that if a heavily multithreaded
guest process (such as Java) calls fork() it can deadlock,
with the thread that called fork() stuck in fork_start()
with the tb lock and waiting for the mmap lock, but some
other thread in tb_find() with the mmap lock and waiting
for the tb lock. The cpu_list_lock() should also always be
taken last, not first.
Fix this by making fork_start() grab the locks in the
right order. The order in which we drop locks doesn't
matter, so we leave fork_end() the way it is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1512397331-15238-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJaZx3vAAoJEPQH2wBh1c9AmwMIAJEYXNcSMyxQWqzixfMri5qs
pefoyv5gfzi3Gn7BQFluX+78mv0K828rueTfM3infydaqmPEacaPWtHMzDFWgsN8
9DIFldXGJBo+vFaJkxXNZjT/jbQWhgqnfspOvYdBqvoVwBbUmYTf366aClNvYjn8
Q/h3U/2KkNd3HddT7aFIn5S/4VQT8wEtkgcpnVSV642rldTw+Sa7qt6UX6/7nGVD
afcV1ZJ/Ap48GcaPsbzQms2jt2WG6T0XzzjdGzhhq2qZmOy9IlnxZKRPwXCFbhV1
0QoZBTYa+jX4Jeyp2agbZ2cJI/g2sAxwtbSEavBBl+E7iqzRXdODJ/8vM7fcwmY=
=iJB4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-2018-01-23' into queue-block
Block patches
# gpg: Signature made Tue Jan 23 12:35:11 2018 CET
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* mreitz/tags/pull-block-2018-01-23: (25 commits)
iotests: Disable some tests for compat=0.10
iotests: Split 177 into two parts for compat=0.10
iotests: Make 059 pass on machines with little RAM
iotests: Filter compat-dependent info in 198
iotests: Make 191 work with qcow2 options
iotests: Make 184 image-less
iotests: Make 089 compatible with compat=0.10
iotests: Fix 067 for compat=0.10
iotests: Fix 059's reference output
iotests: Fix 051 for compat=0.10
iotests: Fix 020 for vmdk
iotests: Skip 103 for refcount_bits=1
iotests: Forbid 020 for non-file protocols
iotests: Drop format-specific in _filter_img_info
iotests: Fix _img_info for backslashes
block/vmdk: Add blkdebug events
block/qcow: Add blkdebug events
qcow2: No persistent dirty bitmaps for compat=0.10
block/vmdk: Fix , instead of ; at end of line
qemu-iotests: Fix locking issue in 102
...
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Tests 080, 130, 137, and 176 simply do not work with compat=0.10 for the
reasons stated there.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20171123020832.8165-10-mreitz@redhat.com>
[eblake: fix 177 in a separate commit]
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20180117165420.15946-3-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When originally written, test 177 explicitly took care to run
with compat=0.10. Then I botched my own test in commit
81c219ac and f0a9c18f, by adding additional actions that require
v3 images. Split out the new code into a new v3-only test, 204,
and revert 177 back to its original state other than a new comment.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-id: 20180117165420.15946-2-eblake@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171129192411.6637-1-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is a bit of image-specific information which depends on the qcow2
compat level. Filter it so that 198 works with compat=0.10 (and any
refcount_bits value).
Note that we cannot simply drop the --format-specific switch because we
do need the "encrypt" information.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-18-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In order for 191 to work with an explicit refcount_bits or compat=0.10,
we should strip format-specific information from the output--and we can
do so by using _filter_img_info.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-17-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
184 does not need an image, so don't use one.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-16-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
The only thing that is missing is a _filter_img_info after the
"$QEMU_IO -c info" invocations.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-15-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
067 works very well with compat=0.10 once you remove format-specific
information from the QMP output.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-14-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As of commit 9877860e7b, vmdk fails
differently when opening the sample image.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-13-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
051 has both compat=1.1 and compat=0.10 tests (once it uses
lazy_refcounts, once it tests that setting them does not work).
For the compat=0.10 tests, it already explicitly creates a suitable
image. So let's just ignore the user-specified compat level for the
lazy_refcounts test and explicitly create a compat=1.1 image there, too.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-12-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
vmdk cannot work with anything but vmdk backing files, so make the
backing file be the same format as the overlay.
Reported-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-11-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-9-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This test does funny things like TEST_IMG="TEST_IMG.base" _make_test_img
that usually only work with the file protocol. More specifically, they
do not work with the most interesting non-file protocols, so we might as
well skip this for anything but file.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-8-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
_filter_img_info should remove format-specific information, too. We
already have such a filter in _img_info, and it is very useful for
query-block-named-block-nodes (etc.), too.
However, in 198 we need that information (but we still want the rest of
the filter), so make that filtering optional. Note that "the rest of
the filter" includes filtering of the test directory, so we can drop the
_filter_testdir from 198 at the same time.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-7-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is certainly not complete, but it includes at least write_aio and
read_aio.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-5-mreitz@redhat.com
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is not necessarily complete, but it should include the most
important places.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Persistent dirty bitmaps require a properly functioning
autoclear_features field, or we cannot track when an unsupporting
program might overwrite them. Therefore, we cannot support them for
compat=0.10 images.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171123020832.8165-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
102 truncates a qcow2 file (the raw file) on purpose while a VM is
running. However, image locking will usually prevent exactly this.
The fact that most people have not noticed until now (I suppose you may
have seen sporadic failures, but not taken them too seriously, like me)
further shows that this truncation is actually not really done
concurrently, but that the VM is still starting up by this point and has
not yet opened the image. Remedy this by waiting for the monitor shell
to appear before the qemu-img invocation so we know the VM is up.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171129185102.29390-1-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Now that iotest 093 test proves that the throttling configuration
survives a blockdev-remove-medium/blockdev-insert-medium pair, the
original reason for declaring these commands experimental is gone
(see commit 6e0abc251d).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-5-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is an incompatible change, which is fine as the commands are
experimental.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-4-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Currently, the tray and medium commands in the AHCI test use the
deprecated @device parameter. This patch switches all invocations over
to use @id.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-3-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In some cases, these commands still use the deprecated @device
parameter. Fix that so we can later drop that parameter from their
interface.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-2-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can easily repair unaligned preallocated zero clusters by discarding
them, so why not do it?
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110203759.14018-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch implements a test case for the scenario that was failing
prior to the patch "migration/ram.c: do not set 'postcopy_running' in
POSTCOPY_INCOMING_END", commit acab30b85d.
This new test file 201 was derived from the test file 181 authored
by Kevin Wolf.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
