The check for `n->namespace.blkconf.blk` always fails because
this is in the initialization function.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
The description was originally removed in commit 578d914b26
("hw/block/nvme: align zoned.zasl with mdts") together with the removal
of the zoned.append_size_limit parameter itself.
However, it was (most likely accidentally), re-added in commit
f7dcd31885 ("hw/block/nvme: add non-mdts command size limit for verify").
Remove the description again, since the parameter it describes,
zoned.append_size_limit, no longer exists.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Qemu crashes on shutdown if the chardev used by vhost-user-blk has been
finalized before the vhost-user-blk.
This happens with char-socket chardev operating in the listening mode (server).
The char-socket chardev emits "close" event at the end of finalizing when
its internal data is destroyed. This calls vhost-user-blk event handler
which in turn tries to manipulate with destroyed chardev by setting an empty
event handler for vhost-user-blk cleanup postponing.
This patch separates the shutdown case from the cleanup postponing removing
the need to set an event handler.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Message-Id: <20210325151217.262793-4-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit 4bcad76f4c ("vhost-user-blk: delay vhost_user_blk_disconnect")
introduced postponing vhost_dev cleanup aiming to eliminate qemu aborts
because of connection problems with vhost-blk daemon.
However, it introdues a new problem. Now, any communication errors
during execution of vhost_dev_init() called by vhost_user_blk_device_realize()
lead to qemu abort on assert in vhost_dev_get_config().
This happens because vhost_user_blk_disconnect() is postponed but
it should have dropped s->connected flag by the time
vhost_user_blk_device_realize() performs a new connection opening.
On the connection opening, vhost_dev initialization in
vhost_user_blk_connect() relies on s->connection flag and
if it's not dropped, it skips vhost_dev initialization and returns
with success. Then, vhost_user_blk_device_realize()'s execution flow
goes to vhost_dev_get_config() where it's aborted on the assert.
To fix the problem this patch adds immediate cleanup on device
initialization(in vhost_user_blk_device_realize()) using different
event handlers for initialization and operation introduced in the
previous patch.
On initialization (in vhost_user_blk_device_realize()) we fully
control the initialization process. At that point, nobody can use the
device since it isn't initialized and we don't need to postpone any
cleanups, so we can do cleaup right away when there is a communication
problem with the vhost-blk daemon.
On operation we leave it as is, since the disconnect may happen when
the device is in use, so the device users may want to use vhost_dev's data
to do rollback before vhost_dev is re-initialized (e.g. in vhost_dev_set_log()).
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-3-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It is useful to use different connect/disconnect event handlers
on device initialization and operation as seen from the further
commit fixing a bug on device initialization.
This patch refactors the code to make use of them: we don't rely any
more on the VM state for choosing how to cleanup the device, instead
we explicitly use the proper event handler depending on whether
the device has been initialized.
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210325151217.262793-2-den-plotnikov@yandex-team.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Max noticed that since blk_aio_pwrite_zeroes() may invoke the callback
before returning, the callbacks will never see *count == 0 and thus
never free the count variable or decrement num_formats causing a CQE to
never be posted.
Coverity (CID 1451082) also picked up on the fact that count would not
be free'ed if the namespace was of zero size.
Fix both of these issues by explicitly checking *count and finalize for
the given namespace if --(*count) is zero. Enqueing a CQE if there are
no AIOs outstanding after this case is already handled by nvme_format()
by inspecting *num_formats.
Reported-by: Max Reitz <mreitz@redhat.com>
Reported-by: Coverity (CID 1451082)
Fixes: dc04d25e2f ("hw/block/nvme: add support for the format nvm command")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
If nvme_map_dptr() fails, nvme_dif_rw() will leak the bounce context.
Fix this by using the same error handling as everywhere else in the
function.
Reported-by: Coverity (CID 1451080)
Fixes: 146f720c55 ("hw/block/nvme: end-to-end data protection")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Whenever a Xen block device is detach via xenstore, the image
associated with it remained open by the backend QEMU and an error is
logged:
qemu-system-i386: failed to destroy drive: Node xvdz-qcow2 is in use
This happened since object_unparent() doesn't immediately frees the
object and thus keep a reference to the node we are trying to free.
The reference is hold by the "drive" property and the call
xen_block_drive_destroy() fails.
In order to fix that, we call drain_call_rcu() to run the callback
setup by bus_remove_child() via object_unparent().
Fixes: 2d24a64661 ("device-core: use RCU for list of children of a bus")
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20210308143232.83388-1-anthony.perard@citrix.com>
Per SST25VF016B datasheet [1], SST flash requires a dummy byte after
the address bytes. Note only SPI mode is supported by SST flashes.
[1] http://ww1.microchip.com/downloads/en/devicedoc/s71271_04.pdf
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20210306060152.7250-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Several QOM type names contain ',':
ARM,bitband-memory
etraxfs,pic
etraxfs,serial
etraxfs,timer
fsl,imx25
fsl,imx31
fsl,imx6
fsl,imx6ul
fsl,imx7
grlib,ahbpnp
grlib,apbpnp
grlib,apbuart
grlib,gptimer
grlib,irqmp
qemu,register
SUNW,bpp
SUNW,CS4231
SUNW,DBRI
SUNW,DBRI.prom
SUNW,fdtwo
SUNW,sx
SUNW,tcx
xilinx,zynq_slcr
xlnx,zynqmp
xlnx,zynqmp-pmu-soc
xlnx,zynq-xadc
These are all device types. They can't be plugged with -device /
device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one
actually works.
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-x86_64 -device SUNW,,fdtwo,help
Trap for the unwary. The fact that this was broken in
device-introspect-test for more than six years until commit e27bd49876
fixed it demonstrates that "the unwary" includes seasoned developers.
One QOM type name contains ' ': "ICH9 SMB". Because having to
remember just one way to quote would be too easy.
Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and '
' by '-' in the other type names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-2-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
The previous commit rendered the name fdctrl_connect_drives() somewhat
misleading. Get rid of it by inlining the (now pretty simple)
function into its only caller.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-4-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Drop the crap deprecated in commit 4a27a638e7 "fdc: Deprecate
configuring floppies with -global isa-fdc" (v5.1.0).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20210309161214.1402527-3-armbru@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
- QAPIfy object-add and --object
- stream: Fail gracefully if permission is denied
- storage-daemon: Fix crash on quit when job is still running
- curl: Fix use after free
- char: Deprecate backend aliases, fix QMP query-chardev-backends
- Fix image creation option defaults that exist in both the format and
the protocol layer (e.g. 'cluster_size' in qcow2 and rbd; the qcow2
default was incorrectly applied to the rbd layer)
-----BEGIN PGP SIGNATURE-----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=zZCm
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches and object-add QAPIfication
- QAPIfy object-add and --object
- stream: Fail gracefully if permission is denied
- storage-daemon: Fix crash on quit when job is still running
- curl: Fix use after free
- char: Deprecate backend aliases, fix QMP query-chardev-backends
- Fix image creation option defaults that exist in both the format and
the protocol layer (e.g. 'cluster_size' in qcow2 and rbd; the qcow2
default was incorrectly applied to the rbd layer)
# gpg: Signature made Fri 19 Mar 2021 09:18:22 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (42 commits)
vl: allow passing JSON to -object
qom: move user_creatable_add_opts logic to vl.c and QAPIfy it
tests: convert check-qom-proplist to keyval
qom: Support JSON in HMP object_add and tools --object
char: Simplify chardev_name_foreach()
char: Deprecate backend aliases 'tty' and 'parport'
char: Skip CLI aliases in query-chardev-backends
qom: Add user_creatable_parse_str()
hmp: QAPIfy object_add
qemu-img: Use user_creatable_process_cmdline() for --object
qom: Add user_creatable_add_from_str()
qemu-nbd: Use user_creatable_process_cmdline() for --object
qemu-io: Use user_creatable_process_cmdline() for --object
qom: Factor out user_creatable_process_cmdline()
qom: Remove user_creatable_add_dict()
qemu-storage-daemon: Implement --object with qmp_object_add()
qom: Make "object" QemuOptsList optional
qapi/qom: QAPIfy object-add
qapi/qom: Add ObjectOptions for x-remote-object
qapi/qom: Add ObjectOptions for input-*
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This converts object-add from 'gen': false to the ObjectOptions QAPI
type. As an immediate benefit, clients can now use QAPI schema
introspection for user creatable QOM objects.
It is also the first step towards making the QAPI schema the only
external interface for the creation of user creatable objects. Once all
other places (HMP and command lines of the system emulator and all
tools) go through QAPI, too, some object implementations can be
simplified because some checks (e.g. that mandatory options are set) are
already performed by QAPI, and in another step, QOM boilerplate code
could be generated from the schema.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Format NVM admin command can make a namespace or namespaces to be
with different LBA size and metadata size with protection information
types.
This patch introduces Format NVM command with LBA format, Metadata, and
Protection Information for the device. The secure erase operation things
and support for formatting zoned namespaces are yet to be added.
The parameter checks inside of this patch has been referred from
Keith's old branch.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
[anaidu.gollu: rebased on e2e]
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
[k.jensen: rebased for reworked aio tracking]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Pull lba format initialization code into separate function in
preparation for Format NVM support.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
In preparation for Format NVM support, use runtime helpers instead of
the constant device parameters when getting lba size information etc.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
This patch introduces multiple LBA formats supported with the typical
logical block sizes of 512 bytes and 4096 bytes as well as metadata
sizes of 0, 8, 16 and 64 bytes. The format will be chosed based on the
lbads and ms parameters of the nvme-ns device.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
[k.jensen: resurrected and rebased]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Verify is not subject to MDTS, so a single Verify command may result in
excessive amounts of allocated memory. Impose a limit on the data size
by adding support for TP 4040 ("Non-MDTS Command Size Limits").
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add support for namespaces formatted with protection information. The
type of end-to-end data protection (i.e. Type 1, Type 2 or Type 3) is
selected with the `pi` nvme-ns device parameter. If the number of
metadata bytes is larger than 8, the `pil` nvme-ns device parameter may
be used to control the location of the 8-byte DIF tuple. The default
`pil` value of '0', causes the DIF tuple to be transferred as the last
8 bytes of the metadata. Set to 1 to store this in the first eight bytes
instead.
Co-authored-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Add support for metadata in the form of extended logical blocks as well
as a separate buffer of data. The new `ms` nvme-ns device parameter
specifies the size of metadata per logical block in bytes. The `mset`
nvme-ns device parameter controls whether metadata is transfered as part
of an extended lba (set to '1') or in a separate buffer (set to '0',
the default).
Regardsless of the scheme chosen with `mset`, metadata is stored at the
end of the namespace backing block device. This requires the user
provided PRP/SGLs to be walked and "split" into data and metadata
scatter/gather lists if the extended logical block scheme is used, but
has the advantage of not breaking the deallocated blocks support.
Co-authored-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Gollu Appalanaidu <anaidu.gollu@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
nvme_zone_mgmt_recv uses nvme_ns_nlbas() to get the number of LBAs in
the namespace and then calculates the number of zones to report by
incrementing slba with ZSZE until exceeding the number of LBAs as
returned by nvme_ns_nlbas().
This is bad because the namespace might be of such as size that some
LBAs are valid, but are not part of any zone, causing zone management
receive to report one additional (but non-existing) zone.
Fix this with a conventional loop on i < ns->num_zones instead.
Fixes: a479335bfa ("hw/block/nvme: Support Zoned Namespace Command Set")
Cc: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Coverity complains about a possible memory corruption in the
nvme_ns_attach and _detach functions. While we should not (famous last
words) be able to reach this function without nsid having previously
been validated, this is still an open door for future misuse.
Make Coverity and maintainers happy by asserting that the index into the
array is valid. Also, while not detected by Coverity (yet), add an
assert in nvme_subsys_ns and nvme_subsys_register_ns as well since a
similar issue is exists there.
Fixes: 037953b5b2 ("hw/block/nvme: support namespace detach")
Fixes: CID 1450757
Fixes: CID 1450758
Cc: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
page_size is a uint32_t, and zasl is a uint8_t, so the expression
`page_size << zasl` is done using 32-bit arithmetic and might overflow.
Since we then compare this against a 64 bit data_size value, Coverity
complains that we might overflow unintentionally. An MDTS/ZASL value in
excess of 4GiB is probably impractical, but it is not entirely
unrealistic, so add a cast such that we handle that case properly.
Fixes: 578d914b26 ("hw/block/nvme: align zoned.zasl with mdts")
Fixes: CID 1450756
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Rather than having a device specific debug implementation in
pflash_cfi01.c and pflash_cfi02.c, use the standard tracing facility.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216142721.1985543-2-david.edmondson@oracle.com>
[PMD: Rebased, fixed pflash_write_block_erase trace event format]
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
PFlashCFI01.ro is a bool, declare it as such.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210216142721.1985543-3-david.edmondson@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Use the 'mode_read_array' event when we set the device in such
mode, and use the 'reset' event in DeviceReset handler.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210310170528.1184868-10-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210310170528.1184868-9-philmd@redhat.com>
There is multiple places resetting the internal state machine.
Factor the code out in a new pflash_reset_state_machine() method.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210310170528.1184868-8-philmd@redhat.com>
The same pattern is used when setting the flash in READ_ARRAY mode:
- Set the state machine command to READ_ARRAY
- Reset the write_cycle counter
- Reset the memory region in ROMD
Refactor the current code by extracting this pattern.
It is used three times:
- When the timer expires and not in bypass mode
- On a read access (on invalid command).
- When the device is initialized. Here the ROMD mode is hidden
by the memory_region_init_rom_device() call.
pflash_register_memory(rom_mode=true) already sets the ROM device
in "read array" mode (from I/O device to ROM one). Explicit that
by renaming the function as pflash_mode_read_array(), adding
a trace event and resetting wcycle.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210310170528.1184868-7-philmd@redhat.com>
There is only one call to pflash_register_memory() with
rom_mode == false. As we want to modify pflash_register_memory()
in the next patch, open-code this trivial function in place for
the 'rom_mode == false' case.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210310170528.1184868-6-philmd@redhat.com>
There is only one call to pflash_setup_mappings(). Convert 'rom_mode'
to boolean and set it to true directly within pflash_setup_mappings().
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210310170528.1184868-5-philmd@redhat.com>
Fill the CFI table in out of DeviceRealize() in a new function:
pflash_cfi02_fill_cfi_table().
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210310170528.1184868-4-philmd@redhat.com>
Fill the CFI table in out of DeviceRealize() in a new function:
pflash_cfi01_fill_cfi_table().
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210310170528.1184868-3-philmd@redhat.com>
We are going to move this code, fix its style first.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210310170528.1184868-2-philmd@redhat.com>
Report the configured granularity for discard operation to the
guest. If this is not set use the block size.
Since until now we have ignored the configured discard granularity
and always reported the block size, let's add
'report-discard-granularity' property and disable it for older
machine types to avoid migration issues.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210225001239.47046-1-akihiko.odaki@gmail.com>
The 'running' argument from VMChangeStateHandler does not require
other value than 0 / 1. Make it a plain boolean.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20210111152020.1422021-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Support Identify command for Namespace attached controller list. This
command handler will traverse the controller instances in the given
subsystem to figure out whether the specified nsid is attached to the
controllers or not.
The 4096bytes Identify data will return with the first entry (16bits)
indicating the number of the controller id entries. So, the data can
hold up to 2047 entries for the controller ids.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: rebased for dma refactor]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
If namespace inventory is changed due to some reasons (e.g., namespace
attachment/detachment), controller can send out event notifier to the
host to manage namespaces.
This patch sends out the AEN to the host after either attach or detach
namespaces from controllers. To support clear of the event from the
controller, this patch also implemented Get Log Page command for Changed
Namespace List log type. To return namespace id list through the
command, when namespace inventory is updated, id is added to the
per-controller list (changed_ns_list).
To indicate the support of this async event, this patch set
OAES(Optional Asynchronous Events Supported) in Identify Controller data
structure.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch supports Namespace Attachment command for the pre-defined
nvme-ns device nodes. Of course, attach/detach namespace should only be
supported in case 'subsys' is given. This is because if we detach a
namespace from a controller, somebody needs to manage the detached, but
allocated namespace in the NVMe subsystem.
As command effect for the namespace attachment command is registered,
the host will be notified that namespace inventory is changed so that
host will rescan the namespace inventory after this command. For
example, kernel driver manages this command effect via passthru IOCTL.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
[k.jensen: rebased for dma refactor]
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
This patch has no functional changes. This patch just refactored
nvme_select_ns_iocs() to iterate the attached namespaces of the
controlller and make it invoke __nvme_select_ns_iocs().
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
From NVMe spec 1.4b "6.1.5. NSID and Namespace Relationships" defines
valid namespace types:
- Unallocated: Not exists in the NVMe subsystem
- Allocated: Exists in the NVMe subsystem
- Inactive: Not attached to the controller
- Active: Attached to the controller
This patch added support for allocated, but not attached namespace type:
!nvme_ns(n, nsid) && nvme_subsys_ns(n->subsys, nsid)
nvme_ns() returns attached namespace instance of the given controller
and nvme_subsys_ns() returns allocated namespace instance in the
subsystem.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Expand allocated namespace list (subsys->namespaces) to have 256 entries
which is a value lager than at least NVME_MAX_NAMESPACES which is for
attached namespace list in a controller.
Allocated namespace list should at least larger than attached namespace
list.
n->num_namespaces = NVME_MAX_NAMESPACES;
The above line will set the NN field by id->nn so that the subsystem
should also prepare at least this number of namespace list entries.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
subsys->namespaces array used to be sized to NVME_SUBSYS_MAX_NAMESPACES.
But subsys->namespaces are being accessed with 1-based namespace id
which means the very first array entry will always be empty(NULL).
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Klaus Jensen <k.jensen@samsung.com>
Tested-by: Klaus Jensen <k.jensen@samsung.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
