The FDPIC restorer needs to deal with a function descriptor, hence we
have to extend 'retcode' such that it can hold the instructions needed
to perform this.
The restorer sequence uses the same thumbness as the exception
handler (mainly to support Thumb-only architectures).
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-5-christophe.lyon@st.com>
[lv: moved the change to linux-user/arm/signal.c]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Add FDPIC info into image_info structure since interpreter info is on
stack and needs to be saved to be accessed later on.
Co-Authored-By: Mickaël Guêné <mickael.guene@st.com>
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-4-christophe.lyon@st.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We want to avoid code disabled by default, because it ends up less
tested. This patch removes all instances of #ifdef CONFIG_USE_FDPIC,
most of which can be safely kept. For the ones that should be
conditionally executed, we define elf_is_fdpic(). Without this patch,
defining CONFIG_USE_FDPIC would prevent QEMU from building precisely
because elf_is_fdpic is not defined.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180430080404.7323-2-christophe.lyon@st.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
No code change, only move code from main.c to
xtensa/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-20-laurent@vivier.eu>
No code change, only move code from main.c to
hppa/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-19-laurent@vivier.eu>
No code change, only move code from main.c to
riscv/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Clark <mjc@sifive.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-18-laurent@vivier.eu>
No code change, only move code from main.c to
tilegx/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-17-laurent@vivier.eu>
No code change, only move code from main.c to
s390x/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-16-laurent@vivier.eu>
No code change, only move code from main.c to
alpha/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-15-laurent@vivier.eu>
No code change, only move code from main.c to
m68k/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-14-laurent@vivier.eu>
No code change, only move code from main.c to
microblaze/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-13-laurent@vivier.eu>
No code change, only move code from main.c to
cris/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-12-laurent@vivier.eu>
No code change, only move code from main.c to
sh4/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-11-laurent@vivier.eu>
No code change, only move code from main.c to
openrisc/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-10-laurent@vivier.eu>
No code change, only move code from main.c to
nios2/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-9-laurent@vivier.eu>
No code change, only move code from main.c to
mips/cpu_loop.c.
Include mips/cpu_loop.c in mips64/cpu_loop.c
to avoid to duplicate code.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-8-laurent@vivier.eu>
No code change, only move code from main.c to
ppc/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-7-laurent@vivier.eu>
No code change, only move code from main.c to
sparc/cpu_loop.c.
Include sparc/cpu_loop.c in sparc64/cpu_loop.c
to avoid to duplicate code.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180411185651.21351-6-laurent@vivier.eu>
No code change, only move code from main.c to
arm/cpu_loop.c and duplicate some macro
defined for both arm and aarch64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-5-laurent@vivier.eu>
No code change, only move code from main.c to
aarch64/cpu_loop.c and duplicate some macro
defined for both arm and aarch64.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-4-laurent@vivier.eu>
No code change, only move code from main.c to
i386/cpu_loop.c.
Include i386/cpu_loop.c in x86_64/cpu_loop.c
to avoid to duplicate code.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-3-laurent@vivier.eu>
Create a cpu_loop-common.h for future use by
these new files and use it in the existing
main.c
Introduce target_cpu_copy_regs():
declare the function in cpu_loop-common.h
and an empty function for each target,
to move all the cpu_loop prologues to this function.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180411185651.21351-2-laurent@vivier.eu>
Instead of calling setup_frame() conditionally to a list of known targets,
define TARGET_ARCH_HAS_SETUP_FRAME if the target provides the function
and call it only if the macro is defined.
Move declarations of setup_frame() and setup_rt_frame() to
linux-user/signal-common.h
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-21-laurent@vivier.eu>
No code change, only move code from signal.c to
ppc/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-20-laurent@vivier.eu>
No code change, only move code from signal.c to
mips/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
mips64/signal.c includes mips/signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-19-laurent@vivier.eu>
No code change, only move code from signal.c to
sparc/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
sparc64/signal.c includes sparc/signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-18-laurent@vivier.eu>
No code change, only move code from signal.c to
i386/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
x86_64/signal.c includes i386/signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-17-laurent@vivier.eu>
No code change, only move code from signal.c to
xtensa/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-16-laurent@vivier.eu>
No code change, only move code from signal.c to
hppa/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-15-laurent@vivier.eu>
No code change, only move code from signal.c to
riscv/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-14-laurent@vivier.eu>
No code change, only move code from signal.c to
tilegx/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180424192635.6027-13-laurent@vivier.eu>
No code change, only move code from signal.c to
alpha/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-12-laurent@vivier.eu>
No code change, only move code from signal.c to
m68k/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-11-laurent@vivier.eu>
No code change, only move code from signal.c to
s390x/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-10-laurent@vivier.eu>
No code change, only move code from signal.c to
openrisc/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-9-laurent@vivier.eu>
No code change, only move code from signal.c to
nios2/signal.c, except adding includes and
exporting setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-8-laurent@vivier.eu>
No code change, only move code from signal.c to
cris/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-7-laurent@vivier.eu>
No code change, only move code from signal.c to
microblaze/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-6-laurent@vivier.eu>
No code change, only move code from signal.c to
sh4/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-5-laurent@vivier.eu>
No code change, only move code from signal.c to
arm/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-4-laurent@vivier.eu>
No code change, only move code from signal.c to
aarch64/signal.c, except adding includes and
exporting setup_frame() and setup_rt_frame().
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-3-laurent@vivier.eu>
Create a signal-common.h for future use by these new files
and use it in the existing signal.c
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180424192635.6027-2-laurent@vivier.eu>
Currently we mishandle emulation of the getdents syscall for the
case of a 64 bit guest on a 32 bit host -- it defaults into
the 'host and guest same size' codepath and generates incorrect
structures in the guest buffer.
We can't easily handle the 64-on-32 case using the host getdents
syscall, because the guest struct dirent is bigger than the
host struct dirent, and we might find the host syscall has handed
us back more records than we can fit in the guest buffer after
conversion. Instead, always emulate 64-on-32 getdents with
the host getdents64. This avoids the buffer-overrun problem
because a dirent64 struct is always the same size on any host
and always larger than any architecture's dirent struct.
Reported-by: Henry Wertz <hwertz10@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20180419125740.2695-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
As support for RISC-V was only merged into the mainline kernel at 4.15
it is unlikely that glibc will be happy with a reported kernel version
of 3.8.0. Indeed when I testing binaries created by the current Debian
Sid compiler the tests failed with:
FATAL: kernel too old
Bump the version to the minimum a RISC-V glibc would expect:
https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/riscv/configure.ac
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180425100218.24785-1-alex.bennee@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In commit 8c5931de0a we added support for SVE extended
sigframe records. These mean that the signal frame might now be
larger than the size of the target_rt_sigframe record, so make sure
we call lock_user on the entire frame size when we're creating it.
(The code for restoring the signal frame already correctly handles
the extended records by locking the 'extra' section separately to the
main section.)
In particular, this fixes a bug even for non-SVE signal frames,
because it extends the locked section to cover the
target_rt_frame_record. Previously this was part of 'struct
target_rt_sigframe', but in commit e1eecd1d9d we pulled
it out into its own struct, and so locking the target_rt_sigframe
alone doesn't cover it. This bug would mean that we would fail
to correctly handle the case where a signal was taken with
SP pointing 16 bytes into an unwritable page, with the page
immediately below it in memory being writable.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
AArch64 stack frames include a 'frame record' which holds a pointer
to the next frame record in the chain and the LR on entry to the
function. The procedure calling standard doesn't mandate where
exactly this frame record is in the stack frame, but for signal
frames the kernel puts it right at the top. We used to put it
there too, but in commit 7f0f4208b3 we accidentally put
the "enlarge to the 4K reserved space minimum" check after the
"allow for the frame record" code, rather than before it, with
the effect that the frame record would be inside the reserved
space and immediately after the last used part of it.
Move the frame record back out of the reserved space to where
we used to put it.
This bug shouldn't break any sensible guest code, but test
programs that deliberately look at the internal details
of the signal frame layout will not find what they are
expecting to see.
Fixes: 7f0f4208b3
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20180412140222.2096-1-peter.maydell@linaro.org
Add support for the two currently defined HWCAP bits on MIPS - R6 and
MSA.
Buglink: https://bugs.launchpad.net/qemu/+bug/1754372
Signed-off-by: James Cowgill <james.cowgill@mips.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180315151348.6451-1-james.cowgill@mips.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
get_sigframe() uses regs[1] and this is actual SP.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180409115212.875-1-laurent@vivier.eu>
The AArch64 signal frame design was extended for SVE in commit
8c5931de0a, so that instead of having a fixed setup we
now add various records to the frame, with some of them possibly
overflowing into an extra space outside the original 4K reserved
block in the target_sigcontext. However, we failed to ensure that we
always at least allocate the 4K reserved block. This is ABI, and
some userspace programs rely on it. In particular the dash shell
would segfault if the frame wasn't as big enough.
(Compare the kernel's sigframe_size() function in
arch/arm64/kernel/signal.c.)
Reported-by: Richard Henwood <richard.henwood@arm.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180409140714.26841-1-peter.maydell@linaro.org
Fixes: https://bugs.launchpad.net/bugs/1761535
Fixes: 8c5931de0a
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
preadv/pwritev accept low and high parts of file offset in two separate
parameters. When host bitness doesn't match guest bitness these parts
must be appropriately recombined.
Introduce target_to_host_low_high that does this recombination and use
it in preadv/pwritev syscalls.
This fixes glibc testsuite test misc/tst-preadvwritev64.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Sparc as an extended sigaction structure containing
the field ka_restorer used in place of sa_restorer.
Define TARGET_ARCH_HAS_KA_RESTORER and use it
with sparc.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180402102453.9883-2-laurent@vivier.eu>
setup_frame() doesn't set correctly the address of the trampoline code.
The offset of retcode array must be added to the stack frame address.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180401204653.14211-1-laurent@vivier.eu>
fadvise64_64 on xtensa passes advice as the second argument and so must
be handled similar to PPC.
This fixes glibc testsuite tests posix/tst-posix_fadvise and
posix/tst-posix_fadvise64.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
host_to_target_timespec may return error if target address could not be
locked, but it is ignored.
Propagate return value of host_to_target_timespec to the caller of
clock_gettime.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- make target_ipc_perm fields match kernel definitions for xtensa;
- add target_semid64_ds with proper order of times and reserved fields
for little/big endian specific for xtensa;
- add missing reserved fields after time fields to the target_shmid_ds;
- fix types of shm_cpid, shm_lpid and shm_nattch fields of
target_shmid_ds to match kernel definitions for xtensa.
These changes fix guest ipcs output and fix glibc testsuite tests
sysvipc/test-sysvsem and sysvipc/test-sysvshm.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
mq_getsetattr implementation does not set errno correctly in case of
error. Also in the presence of both 2nd and 3rd arguments it calls both
mq_getattr and mq_setattr, whereas only the latter call would suffice.
Don't call mq_getattr in the presence of the 2nd argument. Don't copy
output back to user in case of error. Use get_errno to set errno value.
This fixes test rt/tst-mqueue2 from the glibc testsuite.
Cc: Lionel Landwerlin <lionel.landwerlin@openwide.fr>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
cpu_copy adds newly created CPU object to container/machine/unattached,
but does it w/o proper locking. As a result when multiple threads create
threads rapidly QEMU may abort with the following message:
GLib-CRITICAL **: g_hash_table_iter_next: assertion
'ri->version == ri->hash_table->version' failed
ERROR:qemu/qom/object.c:1663:object_get_canonical_path_component:
code should not be reached
E.g. this issue is observed when running glibc test nptl/tst-eintr1.
Move cpu_copy invocation under clone_lock to fix that.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In case of syscall restart request set pc back to the syscall
instruction.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
flush_window_regs uses wrong stack frame to save overflow registers in
call8 and call12 frames, which results in wrong register values in
callers of a function that received a signal.
Reimplement flush_window_regs closely following window overflow
sequence.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
At a fixed distance after the usable memory that init_guest_space maps, for
32-bit ARM targets we also need to map a commpage. The normal
init_guest_space logic doesn't keep this in mind when searching for an
address range.
If !host_start, then try to find a big continuous segment where we can put
both the usable memory and the commpage; we then munmap that segment and
set current_start to that address; and let the normal code mmap the usable
memory and the commpage separately. That is: if we don't have hint of
where to start looking for memory, come up with one that is better than
NULL. Depending on host_size and guest_start, there may or may not be a
gap between the usable memory and the commpage, so this is slightly more
restrictive than it needs to be; but it's only a hint, so that's OK.
We only do that for !host start, because if host_start, then either:
- we got an address passed in with -B, in which case we don't want to
interfere with what the user said;
- or host_start is based off of the ELF image's loaddr. The check "if
(host_start && real_start != current_start)" suggests that we really
want lowest available address that is >= loaddr. I don't know why that
is, but I'm trusting that Paul Brook knew what he was doing when he
wrote the original version of that check in
c581deda32 way back in 2010.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-11-lukeshu@lukeshu.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
With all targets defining CPU_RESOLVING_TYPE, refactor
cpu_parse_cpu_model(type, cpu_model) to parse_cpu_model(cpu_model)
so that callers won't have to know internal resolving cpu
type. Place it in exec.c so it could be called from both
target independed vl.c and *-user/main.c.
That allows us to stop abusing cpu type from
MachineClass::default_cpu_type
as resolver class in vl.c which were confusing part of
cpu_parse_cpu_model().
Also with new parse_cpu_model(), the last users of cpu_init()
in null-machine.c and bsd/linux-user targets could be switched
to cpu_create() API and cpu_init() API will be removed by
follow up patch.
With no longer users left remove MachineState::cpu_model field,
new code should use MachineState::cpu_type instead and
leave cpu_model parsing to generic code in vl.c.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <1518000027-274608-5-git-send-email-imammedo@redhat.com>
[ehabkost: Fix bsd-user build error]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
-----BEGIN PGP SIGNATURE-----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=UCny
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xtensa/tags/20180316-xtensa' into staging
target/xtensa linux-user support.
- small cleanup for xtensa registers dumping (-d cpu);
- add support for debugging linux-user process with xtensa-linux-gdb
(as opposed to xtensa-elf-gdb), which can only access unprivileged
registers;
- enable MTTCG for target/xtensa;
- cleanup in linux-user/mmap area making sure that it works correctly
with limited 30-bit-wide user address space;
- import xtensa-specific definitions from the linux kernel,
conditionalize user-only/softmmu-only code and add handlers for
signals, exceptions, process/thread creation and core registers dumping.
# gpg: Signature made Fri 16 Mar 2018 16:46:19 GMT
# gpg: using RSA key 51F9CC91F83FA044
# gpg: Good signature from "Max Filippov <filippov@cadence.com>"
# gpg: aka "Max Filippov <max.filippov@cogentembedded.com>"
# gpg: aka "Max Filippov <jcmvbkbc@gmail.com>"
# Primary key fingerprint: 2B67 854B 98E5 327D CDEB 17D8 51F9 CC91 F83F A044
* remotes/xtensa/tags/20180316-xtensa:
MAINTAINERS: fix W: address for xtensa
qemu-binfmt-conf.sh: add qemu-xtensa
target/xtensa: add linux-user support
linux-user: drop unused target_msync function
linux-user: fix target_mprotect/target_munmap error return values
linux-user: fix assertion in shmdt
linux-user: fix mmap/munmap/mprotect/mremap/shmat
target/xtensa: support MTTCG
target/xtensa: use correct number of registers in gdbstub
target/xtensa: mark register windows in the dump
target/xtensa: dump correct physical registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# linux-user/syscall.c
Import list of syscalls from the kernel source. Conditionalize code/data
that is only used with softmmu. Implement exception handlers. Implement
signal hander (only the core registers for now, no coprocessors or TIE).
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJapqaMAAoJEL/70l94x66DQoUH/Rvg+a8giz/SrEA4P8D3Cb2z
4GNbNUUoy4oU0ltD5IAMskMwpOsvl1batE0D+pKIlfO9NV4+Cj2kpgo0p9TxoYqM
VCby3wRtx27zb5nVytC6M++iIKXmeEMqXmFw61I6umddNPSl4IR3hiHEE0DM+7dV
UPIOvJeEiazyQaw3Iw+ZctNn8dDBKc/+6oxP9xRcYTaZ6hB4G9RZkqGNNSLcJkk7
R0UotdjzIZhyWMOkjIwlpTF4sWv8gsYUV4bPYKMYho5B0Obda2dBM3I1kpA8yDa/
xZ5lheOaAVBZvM5aMIcaQPa65MO9hLyXFmhMOgyfpJhLBBz6Qpa4OLLI6DeTN+0=
=UAgA
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Record-replay lockstep execution, log dumper and fixes (Alex, Pavel)
* SCSI fix to pass maximum transfer size (Daniel Barboza)
* chardev fixes and improved iothread support (Daniel Berrangé, Peter)
* checkpatch tweak (Eric)
* make help tweak (Marc-André)
* make more PCI NICs available with -net or -nic (myself)
* change default q35 NIC to e1000e (myself)
* SCSI support for NDOB bit (myself)
* membarrier system call support (myself)
* SuperIO refactoring (Philippe)
* miscellaneous cleanups and fixes (Thomas)
# gpg: Signature made Mon 12 Mar 2018 16:10:52 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
tcg: fix cpu_io_recompile
replay: update documentation
replay: save vmstate of the asynchronous events
replay: don't process async events when warping the clock
scripts/replay-dump.py: replay log dumper
replay: avoid recursive call of checkpoints
replay: check return values of fwrite
replay: push replay_mutex_lock up the call tree
replay: don't destroy mutex at exit
replay: make locking visible outside replay code
replay/replay-internal.c: track holding of replay_lock
replay/replay.c: bump REPLAY_VERSION again
replay: save prior value of the host clock
replay: added replay log format description
replay: fix save/load vm for non-empty queue
replay: fixed replay_enable_events
replay: fix processing async events
cpu-exec: fix exception_index handling
hw/i386/pc: Factor out the superio code
hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
# Conflicts:
# default-configs/i386-softmmu.mak
# default-configs/x86_64-softmmu.mak
target_msync is not used, remove its declaration and implementation.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
target_mprotect/target_munmap return value goes through get_errno at the
call site, thus the functions must either set errno to host error code
and return -1 or return negative guest error code. Do the latter.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In linux-user QEMU that runs for a target with TARGET_ABI_BITS bigger
than L1_MAP_ADDR_SPACE_BITS an assertion in page_set_flags fires when
mmap, munmap, mprotect, mremap or shmat is called for an address outside
the guest address space. mmap and mprotect should return ENOMEM in such
case.
Change definition of GUEST_ADDR_MAX to always be the last valid guest
address. Account for this change in open_self_maps.
Add macro guest_addr_valid that verifies if the guest address is valid.
Add function guest_range_valid that verifies if address range is within
guest address space and does not wrap around. Use that macro in
mmap/munmap/mprotect/mremap/shmat for error checking.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
If the ensure-alignment code gets triggered, then the
"if (host_start && real_start != current_start)" check will always trigger,
so save 2 syscalls and put that check first.
Note that we can't just switch to using MAP_FIXED for that check, because
then we couldn't differentiate between a failure because "there isn't
enough space" and "there isn't enough space *here*".
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-9-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Instead of doing
if (check1) {
if (check2) {
success;
}
}
retry;
Do a clearer
if (!check1) {
goto try_again;
}
if (!check2) {
goto try_again;
}
success;
try_again:
retry;
Besides being clearer, this makes it easier to insert more checks that
need to trigger a retry on check failure, or rearrange them, or anything
like that.
Because some indentation is changing, "ignore space change" may be useful
for viewing this patch.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-8-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[lv: modified to try again fi valid == 0, not valid == -1 (error case)]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since commit 67a1de0d19 there is no space anymore between the
version number and the parentheses when running configure with
--with-pkgversion=foo :
$ qemu-system-s390x --version
QEMU emulator version 2.11.50(foo)
But the space is included when building without that option
when building from a git checkout:
$ qemu-system-s390x --version
QEMU emulator version 2.11.50 (v2.11.0-1494-gbec9c64-dirty)
The same confusion exists with the "query-version" QMP command.
Let's fix this by introducing a proper QEMU_FULL_VERSION definition
that includes the space and parentheses, while the QEMU_PKGVERSION
should just cleanly contain the package version string itself.
Note that this also changes the behavior of the "query-version" QMP
command (the space and parentheses are not included there anymore),
but that's supposed to be OK since the strings there are not meant
to be parsed by other tools.
Fixes: 67a1de0d19
Buglink: https://bugs.launchpad.net/qemu/+bug/1673373
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1518692807-25859-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are 3 parts to this change:
- Add a comment showing the relative sizes and positions of the blocks of
memory
- introduce and use new aligned_{start,size} instead of adjusting
real_{start_size}
- When we clean up (on failure), munmap(real_start, real_size) instead of
munmap(aligned_start, aligned_size). It *shouldn't* make any
difference, but I will admit that this does mean we are making the
syscall with different values, so this isn't quite a no-op patch.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-6-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
init_guest_commpage needs to check if the mapped space, which ends at
real_start+real_size overlaps with where it needs to put the commpage,
which is (assuming sane qemu_host_page_size) guest_base + 0xffff000, where
guest_base is real_start - guest_start.
[guest_base][ 0xffff0000 ][commpage]
[guest_base][guest_start][real_size] [commpage]
[ real_start ][real_size] [commpage]
^
fail if this gap < 0
Since init_guest_commpage wants to do everything relative to guest_base
(rather than real_start), it obviously needs to be comparing 0xffff0000
against guest_start+real_size, not just real_size.
This bug has been present since 806d102141 in
2012, but guest_start is usually 0, and prior to v2.11 real_size was
usually much smaller than 0xffff0000, so it was uncommon for it to have
made a difference.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-5-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We'll just exit with an error anyway, so it doesn't really matter, but it
is cleaned up in all of the other places were we error out.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-4-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
init_guest_commpage is a much more honest description of what the function
does. validate_guest_space not only suggests that the function has no
side-effects, but also introduces confusion as to why it is only needed on
32-bit ARM targets.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-3-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Instead of defining a bogus validate_guest_space that always returns 1 on
targets other than 32-bit ARM, use #if blocks to only call it on 32-bit ARM
targets. This makes the "normal" flow control clearer.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Message-Id: <20171228180814.9749-2-lukeshu@lukeshu.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[lv: fix condition to "!= 1" as requested by Peter]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
target_mprotect/target_munmap return value goes through get_errno at the
call site, thus the functions must either set errno to host error code
and return -1 or return negative guest error code. Do the latter.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180228221609.11265-8-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In linux-user QEMU that runs for a target with TARGET_ABI_BITS bigger
than L1_MAP_ADDR_SPACE_BITS an assertion in page_set_flags fires when
mmap, munmap, mprotect, mremap or shmat is called for an address outside
the guest address space. mmap and mprotect should return ENOMEM in such
case.
Change definition of GUEST_ADDR_MAX to always be the last valid guest
address. Account for this change in open_self_maps.
Add macro guest_addr_valid that verifies if the guest address is valid.
Add function guest_range_valid that verifies if address range is within
guest address space and does not wrap around. Use that macro in
mmap/munmap/mprotect/mremap/shmat for error checking.
Cc: qemu-stable@nongnu.org
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180307215010.30706-1-jcmvbkbc@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Now we've dropped unicore32, all of the architectures we support
for linux-user implement the signal handling routines. The
dummy "just print a message" versions are unimplemented, so we
can drop them entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180308144733.25615-3-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We dropped the unicore32-linux-user target in commit 5e2b40f727
in 2016. Nobody has made any attempt to fix the issues that
caused us to drop it, so remove the associated code.
(The system emulation parts of unicore32 remain.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180308144733.25615-2-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Depending on the currently selected size of the SVE vector registers,
we can either store the data within the "standard" allocation, or we
may beedn to allocate additional space with an EXTRA record.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180303143823.27055-6-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The EXTRA record allows for additional space to be allocated
beyon what is currently reserved. Add code to emit and read
this record type.
Nothing uses extra space yet.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180303143823.27055-5-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This changes the qemu signal frame layout to be more like the kernel's,
in that the various records are dynamically allocated rather than fixed
in place by a structure.
For now, all of the allocation is out of uc.tuc_mcontext.__reserved,
so the allocation is actually trivial. That will change with SVE support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180303143823.27055-4-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Split out helpers from target_setup_frame and target_restore_sigframe
for dealing with general registers, fpsimd registers, and the end record.
When we add support for sve registers, the relative positions of
these will change.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180303143823.27055-3-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As an implementation choice, widening VL has zeroed the
previously inaccessible portion of the sve registers.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20180303143823.27055-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implementation of linux user emulation for RISC-V.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Sagar Karandikar <sagark@eecs.berkeley.edu>
Signed-off-by: Michael Clark <mjc@sifive.com>
Not enabled anywhere yet.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-11-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Not enabled anywhere yet.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180228193125.20577-2-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Set the appropriate Linux hwcap bits to tell the guest binary if we
have implemented half-precision floating point support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
So here we need to detect the version of binaries and set
cpu_model for it.
Signed-off-by: YunQiang Su <syq@debian.org>
[lv: original patch modified to move code into cpu_get_model()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180220173307.25125-5-laurent@vivier.eu>
M680x0 doesn't support the same set of instructions
as ColdFire, so we can't use "any" CPU type to execute
m68020 instructions.
We select CPU type ("m68040" or "any" for ColdFire)
according to the ELF header. If we can't, we
use by default the value used until now: "any".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180220173307.25125-4-laurent@vivier.eu>
Add a function to return ELF e_flags and use it
to select the CPU model.
Signed-off-by: YunQiang Su <syq@debian.org>
[lv: split the patch and some cleanup in get_elf_eflags()]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180220173307.25125-3-laurent@vivier.eu>
Instead of a sequence of "#if ... #endif" move the
selection to a function in linux-user/*/target_elf.h
We can't add them in linux-user/*/target_cpu.h
because we will need to include "elf.h" to
use ELF flags with eflags, and including
"elf.h" in "target_cpu.h" introduces some
conflicts in elfload.c
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180220173307.25125-2-laurent@vivier.eu>
Back when we used to support compiling either with or without
NPTL threading library support, we used a macro THREAD which would
expand either to nothing (no thread support) or to __thread (threads
supported). For a long time now we have required thread support,
so remove the macro and just use __thread directly as other parts
of QEMU do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180213132246.26844-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
We properly computed the capped mask size to be put to the application
buffer, but didn't actually used it. Also, we need to return the capped mask
size instead of 0 on success.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180211174704.27441-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This unbreaks the testcase from
http://lists.nongnu.org/archive/html/qemu-arm/2018-01/msg00514.html
Thanks to Laurent Vivier for spotting the 7th one.
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Suggested-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <671eaa99f4e0bf3a58f76f9151f7cfa24662227f.1517565566.git.agx@sigxcpu.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
With glibc 2.27 the openpty function prefers the TIOCGPTPEER ioctl.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvmbmhdosb9.fsf_-_@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
-----BEGIN PGP SIGNATURE-----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=DMbf
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2018-02-07-v4' into staging
Miscellaneous patches for 2018-02-07
# gpg: Signature made Fri 09 Feb 2018 12:52:51 GMT
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-misc-2018-02-07-v4:
Move include qemu/option.h from qemu-common.h to actual users
Drop superfluous includes of qapi/qmp/qjson.h
Drop superfluous includes of qapi/qmp/dispatch.h
Include qapi/qmp/qnull.h exactly where needed
Include qapi/qmp/qnum.h exactly where needed
Include qapi/qmp/qbool.h exactly where needed
Include qapi/qmp/qstring.h exactly where needed
Include qapi/qmp/qdict.h exactly where needed
Include qapi/qmp/qlist.h exactly where needed
Include qapi/qmp/qobject.h exactly where needed
qdict qlist: Make most helper macros functions
Eliminate qapi/qmp/types.h
Typedef the subtypes of QObject in qemu/typedefs.h, too
Include qmp-commands.h exactly where needed
Drop superfluous includes of qapi/qmp/qerror.h
Include qapi/error.h exactly where needed
Drop superfluous includes of qapi-types.h and test-qapi-types.h
Clean up includes
Use #include "..." for our own headers, <...> for others
vnc: use stubs for CONFIG_VNC=n dummy functions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the new ARMv8.2 SHA-3, SM3, SM4 and SHA-512 instructions to
AArch64 user mode emulation.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Message-id: 20180207111729.15737-6-ard.biesheuvel@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the change
to target/s390x/gen-features.c manually reverted, and blank lines
around deletions collapsed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180201111846.21846-3-armbru@redhat.com>
We dropped support for ia64 host CPUs in the 2.11 release (removing
the TCG backend for it, and advertising the support as being
completely removed in the changelog). However there are a few bits
and pieces of code still floating about. Remove those, too.
We can drop the check in configure for "ia64 or hppa host?"
entirely, because we don't support hppa hosts either any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1516897189-11035-1-git-send-email-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SPARC code in linux-user/signal.c defines a set of
MC_* constants. On some SPARC hosts these are also defined
by sys/ucontext.h, resulting in build failures:
linux-user/signal.c:2786:0: error: "MC_NGREG" redefined [-Werror]
#define MC_NGREG 19
In file included from /usr/include/signal.h:302:0,
from include/qemu/osdep.h:86,
from linux-user/signal.c:19:
/usr/include/sparc64-linux-gnu/sys/ucontext.h:59:0: note: this is the location of the previous definition
# define MC_NGREG __MC_NGREG
Rename all these constants to SPARC_MC_* to avoid the clash.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1517318239-15764-1-git-send-email-peter.maydell@linaro.org
Helpers that return a pointer into env->vfp.regs so that we isolate
the logic of how to index the regs array for different cpu modes.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180119045438.28582-7-richard.henderson@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is needed for new architectures like RISC-V which do not provide any
other rename-like syscall.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <mvm607su9qs.fsf@suse.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Marco A L Barbosa <malbarbo@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180111183714.22834-2-malbarbo@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
sched_get/setaffinity linux-user syscalls were missing conversions for
little/big endian, which is hairy since longs may not be the same size
either.
For simplicity, this just introduces loops to convert bit by bit like is
done for select.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180109201643.1479-1-samuel.thibault@ens-lyon.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
mmap() is required by the linux kernel ABI and POSIX to return a
non-NULL address when the implementation chooses a start address for the
mapping.
The current implementation of mmap_find_vma_reserved() can return NULL
as start address of a mapping which leads to subsequent crashes inside
the guests glibc, e.g. output of qemu-arm-static --strace executing a
test binary stx_test:
1879 mmap2(NULL,8388608,PROT_READ|PROT_WRITE,MAP_PRIVATE|MAP_ANONYMOUS|0x20000,-1,0) = 0x00000000
1879 write(2,0xf6fd39d0,79) stx_test: allocatestack.c:514: allocate_stack: Assertion `mem != NULL' failed.
This patch fixes mmap_find_vma_reserved() by skipping NULL as start
address while searching for a suitable mapping start address.
CC: Riku Voipio <riku.voipio@iki.fi>
CC: Laurent Vivier <laurent@vivier.eu>
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Maximilian Riemensberger <riemensberger@cadami.net>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1515286904-86418-1-git-send-email-riemensberger@cadami.net>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The third argument to dup3() is a flags word which may be
O_CLOEXEC. We weren't translating this flag from target to
host value, which meant that if the target used a different
value from the host (eg sparc guest and x86 host) the dup3()
call would fail EINVAL. Do the correct translation.
Fixes: https://bugs.launchpad.net/qemu/+bug/1704658
Reported-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1513351080-25917-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Linux struct cmsghdr is already guaranteed to be sufficiently
aligned that CMSG_ALIGN(sizeof struct cmsghdr) is always equal
to sizeof struct cmsghdr. Stop doing the unnecessary alignment
arithmetic for host and target cmsghdr.
This follows kernel commit 1ff8cebf49ed9e9ca2 and brings our
TARGET_CMSG_* macros back into line with the kernel ones,
as well as making them easier to understand.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <1513345976-22958-3-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The handling of length calculations in host_to_target_cmsg()
was rather confused:
* when checking for whether the target cmsg header fit in
the remaining buffer, we were using the host struct size,
not the target size
* we were setting tgt_len to "target payload + header length"
but then using it as if it were the target payload length alone
* in various message type cases we weren't handling the possibility
that host or target buffers were truncated
Fix these problems. The second one in particular is liable
to result in us overrunning the guest provided buffer,
since we will try to convert more data than is actually
present.
Fixes: https://bugs.launchpad.net/qemu/+bug/1701808
Reported-by: Bruno Haible <bruno@clisp.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1513345976-22958-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
When we do a fork() in usermode emulation, we need to be in
a start/end exclusive section, so that we can ensure that no
other thread is in an RCU section. Otherwise you can get this
deadlock:
- fork thread: has mmap_lock, waits for rcu_sync_lock
(because rcu_init_lock() is registered as a pthread_atfork() hook)
- RCU thread: has rcu_sync_lock, waits for rcu_read_(un)lock
- another CPU thread: in RCU critical section, waits for mmap_lock
This can show up if you have a heavily multithreaded guest program
that does a fork().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Stuart Monteith <stuart.monteith@linaro.org>
Message-Id: <1512650481-1723-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our locking order is that the tb lock should be taken
inside the mmap_lock, but fork_start() grabs locks the
other way around. This means that if a heavily multithreaded
guest process (such as Java) calls fork() it can deadlock,
with the thread that called fork() stuck in fork_start()
with the tb lock and waiting for the mmap lock, but some
other thread in tb_find() with the mmap lock and waiting
for the tb lock. The cpu_list_lock() should also always be
taken last, not first.
Fix this by making fork_start() grab the locks in the
right order. The order in which we drop locks doesn't
matter, so we leave fork_end() the way it is.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <1512397331-15238-1-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Our copy of the nwfpe code for emulating of the old FPA11 floating
point unit doesn't check the coprocessor number in the instruction
when it emulates it. This means that we might treat some
instructions which should really UNDEF as being FPA11 instructions by
accident.
The kernel's copy of the nwfpe code doesn't make this error; I suspect
the bug was noticed and fixed as part of the process of mainlining
the nwfpe code more than a decade ago.
Add a check that the coprocessor number (which is always in bits
[11:8] of the instruction) is either 1 or 2, which is where the
FPA11 lives.
Reported-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since for aarch64 the signal trampoline is synthesized directly into the
signal frame we need to make sure the instructions end up little-endian.
Otherwise the wrong endianness will cause a SIGILL upon return from the
signal handler on big-endian targets.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-4-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make big-endian aarch64 systems identify as aarch64_be as expected by
big-endian userland and toolchains.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-id: 20171220212308.12614-3-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable big-endian mode for data accesses on aarch64 for big-endian linux
user mode. Activate it for all exception levels as documented by ARM:
Set the SCTLR EE bit for ELs 1 through 3. Additionally set bit E0E in
EL1 to enable it in EL0 as well.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20171220212308.12614-2-michael.weiser@gmx.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
chk and chk2 compare a value to boundaries, and
trigger a CHK exception if the value is out of bounds.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-8-laurent@vivier.eu>
Use cpu_m68k_get_ccr()/cpu_m68k_set_ccr() to setup and restore correctly
the value of SR in the context structure. Fix target_rt_setup_ucontext().
Fixes: 3219de458c ("linux-user: correctly manage SR in ucontext")
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20180104012913.30763-4-laurent@vivier.eu>
As for other targets, cmpxchg isn't quite right for ll/sc,
suffering from an ABA race, but is sufficient to implement
portable atomic operations.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170907185057.23421-2-richard.henderson@linaro.org>
[aurel32: fix whitespace]
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
applied using ./scripts/clean-includes
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Ben Warren <ben@skyportsystems.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Thanks to Laszlo Ersek for spotting the double semicolon in target/i386/kvm.c
I have trivially grepped the tree for ';;' in C files.
Suggested-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Ladi Prosek <lprosek@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In commit 7c4ee5bcc8 we changed the order in which we construct
the AUXV, but forgot to adjust the calculation of the length. The
result is that we set info->auxv_len to a bogus and negative value,
and then later on the code in open_self_auxv() gets confused and
ends up presenting the guest with an empty file.
Since we now have to calculate the auxv length up-front as part
of figuring out how much we're going to put on the stack, set
info->auxv_len then; this allows us to assert that we put the
same number of entries into auxv as we pre-calculated, rather
than merely having a comment saying we need to do that.
Fixes: https://bugs.launchpad.net/qemu/+bug/1728116
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
SPARC is like Alpha in its handling of the rt_sigaction syscall:
it takes an extra parameter 'restorer' which needs to be copied
into the sa_restorer field of the sigaction struct. The order
of the arguments differs slightly between SPARC and Alpha but
the implementation is otherwise the same. (Compare the
rt_sigaction() functions in arch/sparc/kernel/sys_sparc_64.c
and arch/alpha/kernel/signal.c.)
Note that this change is somewhat moot until SPARC acquires
support for actually delivering RT signals.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For faults on loads and stores, ppc_cpu_handle_mmu_fault() in
target/ppc/user_only_helper.c stores the offending address
in env->spr[SPR_DAR]. Report this correctly to the guest
in si_addr, rather than incorrectly using the address of the
instruction that caused the fault.
This fixes the test case in
https://bugs.launchpad.net/qemu/+bug/1077116
for ppc, ppc64 and ppc64le.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For s390x, the address passed to a signal handler in the
siginfo_t si_addr field is masked (in the kernel this is done in
do_sigbus() and do_sigsegv() in arch/s390/mm/fault.c). Implement
this architecture-specific oddity in linux-user.
This is one of the issues described in
https://bugs.launchpad.net/qemu/+bug/1705118
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
If an application tries to install a seccomp filter using
prctl(PR_SET_SECCOMP), the filter is likely for the target instead of the host
architecture. This will probably cause qemu to be immediately killed when it
executes another syscall.
Prevent this from happening by returning EINVAL from both seccomp prctl
calls. This is the error returned by the kernel when seccomp support is
disabled.
Fixes: https://bugs.launchpad.net/qemu/+bug/1726394
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: James Cowgill <james.cowgill@mips.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Fixes: https://bugs.launchpad.net/qemu/+bug/1716767
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-By: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: James Clarke <jrtc27@jrtc27.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add the missing defines and for TARGET_MAP_STACK and TARGET_MAP_HUGETLB
for alpha, mips, ppc, x86, hppa. Fix the mmap_flags translation table
to translate MAP_HUGETLB between host and target architecture, and to
drop MAP_STACK.
Signed-off-by: Helge Deller <deller@gmx.de>
Message-Id: <20170311183016.GA20514@ls3530.fritz.box>
[rth: Drop MAP_STACK instead of translating it, since it is ignored
in the kernel anyway. Fix tabs to spaces.]
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
TARGET_MAP_TYPE needs to be 0x03 instead of 0x0f on the hppa
architecture, otherwise it conflicts with MAP_FIXED which is 0x04.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-ID: <20170311175019.GA7195@ls3530.fritz.box>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
By failing to return from the syscall in the child, the child
issues another clone syscall and hilarity ensues.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
