We must call the reset functions for both virtio-gpu
and vga to properly reset the combo device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180821111313.27792-2-kraxel@redhat.com
This contains the offset of the IDE controller within the macio address space
and is required to allow the address to be included within the fw path.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
As the in-built IDE controller is attached to the macio bus then we should also
model this the same in QEMU to aid fw path generation.
Note that all existing macio devices are moved onto the new macio bus so that
the qdev tree accurately reflects the real hardware.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The generated qapi_event_send_FOO() take an Error ** argument. They
can't actually fail, because all they do with the argument is passing it
to functions that can't fail: the QObject output visitor, and the
@qmp_emit callback, which is either monitor_qapi_event_queue() or
event_test_emit().
Drop the argument, and pass &error_abort to the QObject output visitor
and @qmp_emit instead.
Suggested-by: Eric Blake <eblake@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815133747.25032-4-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message rewritten, update to qapi-code-gen.txt corrected]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
There is no known available OS for ppc around anymore that uses page
sizes below 4k, so it does not make much sense that we keep wasting
our time on building and testing the ppcemb-softmmu target. It has
been deprecated since two releases, and nobody complained, so let's
remove this now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
vhost-user-gpu will share the same code to open a DRM node.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180713130916.4153-20-marcandre.lureau@redhat.com>
[ kraxel: buildfix: util/drm.o must be CONFIG_OPENGL not CONFIG_LINUX ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are many error_report()s that can be used in frequently called
functions, especially on IO paths. That can be unideal in that
malicious guest can try to trigger the error tons of time which might
use up the log space on the host (e.g., libvirt can capture the stderr
of QEMU and put it persistently onto disk). In VT-d emulation code, we
have trace_vtd_error() tracer. AFAIU all those places can be replaced
by something like error_report() but trace points are mostly used to
avoid the DDOS attack that mentioned above. However using trace points
mean that errors are not dumped if trace not enabled.
It's not a big deal in most modern server managements since we have
things like logrotate to maintain the logs and make sure the quota is
expected. However it'll still be nice that we just provide another way
to restrict message generations. In most cases, this kind of
error_report()s will only provide valid information on the first message
sent, and all the rest of similar messages will be mostly talking about
the same thing. This patch introduces *_report_once() helpers to allow
a message to be dumped only once during one QEMU process's life cycle.
It will make sure: (1) it's on by deffault, so we can even get something
without turning the trace on and reproducing, and (2) it won't be
affected by DDOS attack.
To implement it, I stole the printk_once() macro from Linux.
CC: Eric Blake <eblake@redhat.com>
CC: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180815095328.32414-2-peterx@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Whitespace adjusted, comments improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbgCm7AAoJENSXKoln91plhJYH/jRqbCaUd04nGuyjOaYUajTL
brz3JD0XN2jD6NnDYUpuiNzawSojNzSklMA0u9AJiG+cpNK+gqW4fX+CYeX7ApjK
99+SXSejxnK3IJUNblQDD/hdCv9Dc1r12R7c80lm+aqJwi4C8hfULTbfrse/QdyA
KIHKl+c3uaWTPG2qC3mpPW/QS+IRPgRRwF/7GILuiagNmMcXyuMd2fQuePnf1rvD
ztTdtNJ0zfdFK1jlLa7D9Xe36RpS1uBinF429dNwXWM/+i1shvxc3Enzb4qEQNYe
ZeVxTomP/nO1elLZYdVUwdQYr6vmnvb1/mtTT6nq0NvHeLGjMZMqOBWGuAtdXoo=
=a8Jv
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-2018' into staging
MIPS queue August 2018 v6
# gpg: Signature made Fri 24 Aug 2018 16:52:27 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-2018: (45 commits)
target/mips: Add definition of nanoMIPS I7200 CPU
mips_malta: Fix semihosting argument passing for nanoMIPS bare metal
mips_malta: Add setting up GT64120 BARs to the nanoMIPS bootloader
mips_malta: Add basic nanoMIPS boot code for Malta board
elf: Don't check FCR31_NAN2008 bit for nanoMIPS
elf: On elf loading, treat both EM_MIPS and EM_NANOMIPS as legal for MIPS
elf: Relax MIPS' elf_check_arch() to accept EM_NANOMIPS too
elf: Add EM_NANOMIPS value as a valid one for e_machine field
target/mips: Fix ERET/ERETNC behavior related to ADEL exception
target/mips: Add updating BadInstr and BadInstrX for nanoMIPS
target/mips: Add availability control via bit NMS
target/mips: Add emulation of DSP ASE for nanoMIPS - part 6
target/mips: Add emulation of DSP ASE for nanoMIPS - part 5
target/mips: Add emulation of DSP ASE for nanoMIPS - part 4
target/mips: Add emulation of DSP ASE for nanoMIPS - part 3
target/mips: Add emulation of DSP ASE for nanoMIPS - part 2
target/mips: Add emulation of DSP ASE for nanoMIPS - part 1
target/mips: Implement MT ASE support for nanoMIPS
target/mips: Fix pre-nanoMIPS MT ASE instructions availability control
target/mips: Add emulation of nanoMIPS 32-bit branch instructions
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The JSON parser has three public headers, json-lexer.h, json-parser.h,
json-streamer.h. They all contain stuff that is of no interest
outside qobject/json-*.c.
Collect the public interface in include/qapi/qmp/json-parser.h, and
everything else in qobject/json-parser-int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-54-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-53-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-52-armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-51-armbru@redhat.com>
json_message_process_token() accumulates tokens until it got the
sequence of tokens that comprise a single JSON value (it counts curly
braces and square brackets to decide). It feeds those token sequences
to json_parser_parse(). If a non-empty sequence of tokens remains at
the end of the parse, it's silently ignored. check-qjson.c cases
unterminated_array(), unterminated_array_comma(), unterminated_dict(),
unterminated_dict_comma() demonstrate this bug.
Fix as follows. Introduce a JSON_END_OF_INPUT token. When the
streamer receives it, it feeds the accumulated tokens to
json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-46-armbru@redhat.com>
The callback to consume JSON values takes QObject *json, Error *err.
If both are null, the callback is supposed to make up an error by
itself. This sucks.
qjson.c's consume_json() neglects to do so, which makes
qobject_from_json() null instead of failing. I consider that a bug.
The culprit is json_message_process_token(): it passes two null
pointers when it runs into a lexical error or a limit violation. Fix
it to pass a proper Error object then. Update the callbacks:
* monitor.c's handle_qmp_command(): the code to make up an error is
now dead, drop it.
* qga/main.c's process_event(): lumps the "both null" case together
with the "not a JSON object" case. The former is now gone. The
error message "Invalid JSON syntax" is misleading for the latter.
Improve it to "Input must be a JSON object".
* qobject/qjson.c's consume_json(): no update; check-qjson
demonstrates qobject_from_json() now sets an error on lexical
errors, but still doesn't on some other errors.
* tests/libqtest.c's qmp_response(): the Error object is now reliable,
so use it to improve the error message.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-40-armbru@redhat.com>
The JSON parser optionally supports interpolation. The lexer
recognizes interpolation tokens unconditionally. The parser rejects
them when interpolation is disabled, in parse_interpolation().
However, it neglects to set an error then, which can make
json_parser_parse() fail without setting an error.
Move the check for unwanted interpolation from the parser's
parse_interpolation() into the lexer's finite state machine. When
interpolation is disabled, '%' is now handled like any other
unexpected character.
The next commit will improve how such lexical errors are handled.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-39-armbru@redhat.com>
The JSON parser optionally supports interpolation. The code calls it
"escape". Awkward, because it uses the same term for escape sequences
within strings. The latter usage is consistent with RFC 8259 "The
JavaScript Object Notation (JSON) Data Interchange Format" and ISO C.
Call the former "interpolation" instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-38-armbru@redhat.com>
The classical way to structure parser and lexer is to have the client
call the parser to get an abstract syntax tree, the parser call the
lexer to get the next token, and the lexer call some function to get
input characters.
Another way to structure them would be to have the client feed
characters to the lexer, the lexer feed tokens to the parser, and the
parser feed abstract syntax trees to some callback provided by the
client. This way is more easily integrated into an event loop that
dispatches input characters as they arrive.
Our JSON parser is kind of between the two. The lexer feeds tokens to
a "streamer" instead of a real parser. The streamer accumulates
tokens until it got the sequence of tokens that comprise a single JSON
value (it counts curly braces and square brackets to decide). It
feeds those token sequences to a callback provided by the client. The
callback passes each token sequence to the parser, and gets back an
abstract syntax tree.
I figure it was done that way to make a straightforward recursive
descent parser possible. "Get next token" becomes "pop the first
token off the token sequence". Drawback: we need to store a complete
token sequence. Each token eats 13 + input characters + malloc
overhead bytes.
Observations:
1. This is not the only way to use recursive descent. If we replaced
"get next token" by a coroutine yield, we could do without a
streamer.
2. The lexer reports errors by passing a JSON_ERROR token to the
streamer. This communicates the offending input characters and
their location, but no more.
3. The streamer reports errors by passing a null token sequence to the
callback. The (already poor) lexical error information is thrown
away.
4. Having the callback receive a token sequence duplicates the code to
convert token sequence to abstract syntax tree in every callback.
5. Known bug: the streamer silently drops incomplete token sequences.
This commit rectifies 4. by lifting the call of the parser from the
callbacks into the streamer. Later commits will address 3. and 5.
The lifting removes a bug from qjson.c's parse_json(): it passed a
pointer to a non-null Error * in certain cases, as demonstrated by
check-qjson.c.
json_parser_parse() is now unused. It's a stupid wrapper around
json_parser_parse_err(). Drop it, and rename json_parser_parse_err()
to json_parser_parse().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-35-armbru@redhat.com>
json_lexer_init() takes the function to process a token as an
argument. It's always json_message_process_token(). Makes the code
harder to understand for no actual gain. Drop the indirection.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-34-armbru@redhat.com>
The lexer always returns 0 when char feeding. Furthermore, none of the
caller care about the return value.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180326150916.9602-10-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20180823164025.12553-32-armbru@redhat.com>
We reject bytes that can't occur in valid UTF-8 (\xC0..\xC1,
\xF5..\xFF in the lexer. That's insufficient; there's plenty of
invalid UTF-8 not containing these bytes, as demonstrated by
check-qjson:
* Malformed sequences
- Unexpected continuation bytes
- Missing continuation bytes after start bytes other than
\xC0..\xC1, \xF5..\xFD.
* Overlong sequences with start bytes other than \xC0..\xC1,
\xF5..\xFD.
* Invalid code points
Fixing this in the lexer would be bothersome. Fixing it in the parser
is straightforward, so do that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20180823164025.12553-23-armbru@redhat.com>
Modify load_elf32()/load_elf64() to treat EM_NANOMIPS as legal as
EM_MIPS is.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
Value 249 is registered as valid for usage for nanoMIPS executables.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Signed-off-by: Stefan Markovic <smarkovic@wavecomp.com>
-----BEGIN PGP SIGNATURE-----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=GExd
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20180822-1' into staging
migration/next for 20180822
# gpg: Signature made Wed 22 Aug 2018 12:07:59 BST
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/migration/20180822-1:
migration: hold the lock only if it is really needed
migration: move handle of zero page to the thread
migration: drop the return value of do_compress_ram_page
migration: introduce save_zero_page_to_file
migration: fix counting normal page for compression
migration: do not wait for free thread
migration: poll the cm event for destination qemu
tests/migration-test: Silence the kvm_hv message by default
migration: implement the shutdown for RDMA QIOChannel
migration: poll the cm event while wait RDMA work request completion
migration: invoke qio_channel_yield only when qemu_in_coroutine()
migration: implement io_set_aio_fd_handler function for RDMA QIOChannel
migration: Stop rdma yielding during incoming postcopy
migration: implement bi-directional RDMA QIOChannel
migration: create a dedicated connection for rdma return path
migration: disable RDMA WRITE after postcopy started
migrate/cpu-throttle: Add max-cpu-throttle migration parameter
docs/migration: Clarify pre_load in subsections
migration: Correctly handle subsections with no 'needed' function
qapi/migration.json: fix the description for "query-migrate" output
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJbfRjcAAoJEPSH7xhYctcj6vkP/0CxdFLEJ5zfmQCT9plrcenc
4CtR3syKimF1CSk9eKPE8V3oiZSBxuM1FJYPhH8d9UbYcWrItGLr/dgh1EAgurAI
P4oeWqI21CGeCWQGduhmQ51vSw1b8JTdNYWmb3QAsMBUugZYla4lvC3R5h63vmBI
4U1RzQrZmmN9svnNMx22dCInbPNoayR3Ekr7z/bF6sRG/B+ZwecenVoD9X8T/Ozu
epx9OOoBfMGDB5wbEEx/RUKrMsGH5D712QeMHUtGYmLRs1Wl4AV7Si+bSd3oi+GI
aL6ZjuaOofGaESOuH7fTkTGhGgmcPd7+pLPqpEYIJ3wmQOOQP/dp9B+6VXCxTQcA
y5F9FBEP5nQL+OIusvi+l65PqzstrKtxrSzWPGHgmosdLead15znZ4Z6YdOtHWHr
ZZOW55M2ZvlZvEWB3hHmT9rjZFP4Uu9XFIW05gzQiqVhcKemtgQ3hBiX+OvxRpPM
RpGLqGK/oDwadvEsNitYqbRJDe74VSAxOtmvEsDfJLzRoyHM1zHw3au00NdyGhMp
89Xc5AnkuHJLCFZ9duXErt5GQz/7EzHkLpQ16pqyuetgLc50ytED1tgqiJl6+Td1
IS4me8wwBpk+IvRD0zsh4p/FHocL684CSP5+AZwcy8RljtbBacbvmAS6484RSx4c
rWL39dB2uhvHEErmS9/+
=2bke
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/juanquintela/tags/check/20180822' into staging
check/next for 20180822
# gpg: Signature made Wed 22 Aug 2018 09:03:40 BST
# gpg: using RSA key F487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg: aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723
* remotes/juanquintela/tags/check/20180822:
check: Only test tpm devices when they are compiled in
check: Only test usb-ehci when it is compiled in
check: Only test usb-uhci devices when they are compiled in
check: Only test usb-ohci when it is compiled in
check: Only test nvme when it is compiled in
check: Only test pvpanic when it is compiled in
check: Only test wdt_ib700 when it is compiled in
check: Only test sdhci when it is compiled in
check: Only test i82801b11 when it is compiled in
check: Only test ioh3420 when it is compiled in
check: Only test ipack when it is compiled in
check: Only test hda when it is compiled in
check: Only test ac97 when it is compiled in
check: Only test es1370 when it is compiled in
check: Only test rtl8139 when it is compiled in
check: Only test pcnet when it is compiled in
check: Only test eepro100 when it is compiled in
check: Only test ne2000 when it is compiled in
check: Only test vmxnet3 when it is compiled in
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Validate the config settings that the guest tries to set.
The wiki page documentation is not really accurate here:
generally rather than failing requests to set bad parameters,
the hardware will just clip them to something sensible.
Validate the most important parameters: sizes and
the viewport offsets. This prevents the framebuffer
code from trying to read out-of-range memory.
In the property handling code, we validate the new parameters every
time we encounter a tag that sets them. This means we validate the
config multiple times if the request includes multiple config-setting
tags, but the code would require significant restructuring to do a
validation only once but still return the clipped settings for
get-parameter tags and the buffer allocation tag.
Validation of settings made via the older bcm2835_fb_mbox_push()
function will be done in the next commit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-8-peter.maydell@linaro.org
The raspi framebuffir in bcm2835_fb supports the definition
of a virtual "viewport", which is smaller than the full
physical framebuffer size and at an adjustable offset within
it. Only the viewport area is sent to the screen. This allows
the guest to do things like double buffering, or scrolling
by adjusting the viewport origin. Currently QEMU doesn't
implement this at all.
Add support for this feature:
* the property mailbox code needs to distinguish the
virtual width/height from the physical width/height
* the framebuffer code needs to do something with the
virtual width/height/origin information
Note that the wiki documentation on the semantics of the
virtual and physical height and width has it the wrong way
around -- the virtual size is the size of the allocated
buffer, and the physical size is the size of the display,
so the virtual size is always the same as or larger than
the physical.
If the viewport size is set smaller than the physical
screen size, we ignore the viewport settings completely
and just display the physical screen area.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-7-peter.maydell@linaro.org
Abstract out the calculation of the pitch and size of the
framebuffer into functions that operate on the BCM2835FBConfig
struct -- these are about to get a little more complicated
when we add support for virtual and physical sizes differing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-6-peter.maydell@linaro.org
The bcm2835_fb's initial resolution and other parameters are set
via QOM properties. We should reset to those initial values on
device reset, which means we need to save the QOM property
values somewhere that they are not overwritten by guest
changes to the framebuffer configuration.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-5-peter.maydell@linaro.org
The BCM2835FBState struct has a 'pitch' field which is a
cached copy of xres * (bpp >> 3), and a 'size' field which is
a cached copy of pitch * yres. However we don't actually do
anything with these fields; delete them. We retain the
now-unused slots in the VMState struct for migration
compatibility.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-4-peter.maydell@linaro.org
Refactor the fb property setting code so that rather than
using a set of pointers to local variables to track
whether a config value has been updated in the current
mbox and if so what its new value is, we just copy
all the current settings of the fb at the start, and
then update that copy as we go along, before asking
the fb to switch to it at the end.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-3-peter.maydell@linaro.org
The handling of framebuffer properties in the bcm2835_property code
is a bit clumsy, because for each of the many fb related properties
we try to track the value we're about to set and whether we're going
to be setting a value, and then we hand all the new values off
to the framebuffer via a function which takes them all as separate
arguments. It would be simpler if the property code could easily
copy all the framebuffer's current settings, update them with
the new specified values and then ask the framebuffer to switch
to the new set.
As the first part of this refactoring, pull all the fb config
settings fields in BCM2835FBState out into their own struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814144436.679-2-peter.maydell@linaro.org
Create a new include file for the pl022's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
While we're adding the new file to MAINTAINERS, add
also the .c file, which was missing an entry.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-16-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The IoTKit doesn't have any MSCs itself but it does need
some wiring to connect the external signals from MSCs
in the outer board model up to the registers and the
NVIC IRQ line.
We also need to expose a MemoryRegion corresponding to
the AHB bus, so that MSCs in the outer board model can
use that as their downstream port. (In the FPGA this is
the "AHB Slave Expansion" ports shown in the block
diagram in the AN505 documentation.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-14-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
The IoTKit does not have any Master Security Contollers itself,
but it does provide registers in the secure privilege control
block which allow control of MSCs in the external system.
Add support for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180820141116.9118-13-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Implement a model of the TrustZone Master Securtiy Controller,
as documented in the Arm CoreLink SIE-200 System IP for
Embedded TRM (DDI0571G):
https://developer.arm.com/products/architecture/m-profile/docs/ddi0571/g
The MSC is intended to sit in front of a device which can
be a bus master (eg a DMA controller) and programmably gate
its transactions. This allows a bus-mastering device to be
controlled by non-secure code but still restricted from
making accesses to addresses which are secure-only.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180820141116.9118-12-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Wire up the system control element's register banks
(sysctl and sysinfo).
This is the last of the previously completely unimplemented
components in the IoTKit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-11-peter.maydell@linaro.org
Implement the IoTKit system control element's system information
block; this is just a pair of read-only version/config registers,
plus the usual PID/CID ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-10-peter.maydell@linaro.org
The Arm IoTKit includes a system control element which
provides a block of read-only ID registers and a block
of read-write control registers. Implement a minimal
version of this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-9-peter.maydell@linaro.org
The IoTKit has a CMSDK timer device that runs on the S32KCLK.
Create this and wire it up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-8-peter.maydell@linaro.org
The IoTKit includes three different instances of the
CMSDK APB watchdog; create and wire them up.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-7-peter.maydell@linaro.org
Now we have a model of the CMSDK dual timer, we can wire it
up in the IoTKit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-5-peter.maydell@linaro.org
The Arm Cortex-M System Design Kit includes a "dual-input timer module"
which combines two programmable down-counters. Implement a model
of this device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-4-peter.maydell@linaro.org
In the MPS2 FPGAIO, PSCNTR is a free-running downcounter with
a reload value configured via the PRESCALE register, and
COUNTER counts up by 1 every time PSCNTR reaches zero.
Implement these counters.
We can just increment the counters migration subsection's
version ID because we only added it in the previous commit,
so no released QEMU versions will be using it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-3-peter.maydell@linaro.org
The MPS2 FPGAIO block includes some simple free-running counters.
Implement these.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180820141116.9118-2-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-3-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180814002653.12828-2-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some scanouts during boot are top-down without it.
y0_top is set from VHOST_USER_GPU_DMABUF_SCANOUT code path in the last
patch of this series.
In current QEMU code base, only vfio/display uses dmabuf API. But the
VFIO query interface doesn't provide or need that detail so far.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180713130916.4153-5-marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlt+5OYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPtxwf8CQM/F+0L+EKeYfYcVgVZsDhhOkLj
Pm61q0bZsWKLby5jCqIDYw7Z/vodJnSS1DO0slIRoXxvQ9DwlkbBnBy/aG/E9U0q
WF1vbCezibDIt7sGcsu9F5zXU9eqe+E6dZfxFrv8FQSOFVxn34TfeJagWLCtzg0d
LnVTF/e4zJD8IQiM7w6lJQxua3fz13ssPEg2KnMkguDhACMwvZ/K/cA2AJkHRMhY
sroPMwLHlrF1NOoeCIrWxYUmSGCRCAy1DmiPGiiSs0yBq/dL0UkAa5Eu6HMQ7rgI
zUff3JDmzEjixUSIEbpVRN+yPCN0/ACSOpJUrKLDxXbc4nZ+PBQ04YpyPQ==
=UZiV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* x86 TCG fixes for 64-bit call gates (Andrew)
* qumu-guest-agent freeze-hook tweak (Christian)
* pm_smbus improvements (Corey)
* Move validation to pre_plug for pc-dimm (David)
* Fix memory leaks (Eduardo, Marc-André)
* synchronization profiler (Emilio)
* Convert the CPU list to RCU (Emilio)
* LSI support for PPR Extended Message (George)
* vhost-scsi support for protection information (Greg)
* Mark mptsas as a storage device in the help (Guenter)
* checkpatch tweak cherry-picked from Linux (me)
* Typos, cleanups and dead-code removal (Julia, Marc-André)
* qemu-pr-helper support for old libmultipath (Murilo)
* Annotate fallthroughs (me)
* MemoryRegionOps cleanup (me, Peter)
* Make s390 qtests independent from libqos, which doesn't actually support it (me)
* Make cpu_get_ticks independent from BQL (me)
* Introspection fixes (Thomas)
* Support QEMU_MODULE_DIR environment variable (ryang)
# gpg: Signature made Thu 23 Aug 2018 17:46:30 BST
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (69 commits)
KVM: cleanup unnecessary #ifdef KVM_CAP_...
target/i386: update MPX flags when CPL changes
i2c: pm_smbus: Add the ability to force block transfer enable
i2c: pm_smbus: Don't delay host status register busy bit when interrupts are enabled
i2c: pm_smbus: Add interrupt handling
i2c: pm_smbus: Add block transfer capability
i2c: pm_smbus: Make the I2C block read command read-only
i2c: pm_smbus: Fix the semantics of block I2C transfers
i2c: pm_smbus: Clean up some style issues
pc-dimm: assign and verify the "addr" property during pre_plug
pc: drop memory region alignment check for 0
util/oslib-win32: indicate alignment for qemu_anon_ram_alloc()
pc-dimm: assign and verify the "slot" property during pre_plug
ipmi: Use proper struct reference for BT vmstate
vhost-scsi: expose 't10_pi' property for VIRTIO_SCSI_F_T10_PI
vhost-scsi: unify vhost-scsi get_features implementations
vhost-user-scsi: move host_features into VHostSCSICommon
cpus: allow cpu_get_ticks out of BQL
cpus: protect TimerState writes with a spinlock
seqlock: add QemuLockable support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The PIIX4 hardware has block transfer buffer always enabled in
the hardware, but the i801 does not. Add a parameter to pm_smbus_init
to force on the block transfer so the PIIX4 handler can enable this
by default, as it was disabled by default before.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-9-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add the necessary code so that interrupts actually work from
the pm_smbus device.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-7-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There was no block transfer code in pm_smbus.c, and it is needed
for some devices. So add it.
This adds both byte-by-byte block transfers and buffered block
transfers.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-5-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The I2C block transfer commands was not implemented correctly, it
read a length byte and such like it was an smbus transfer.
So fix the smbus_read_block() and smbus_write_block() functions
so they can properly handle I2C transfers, and normal SMBus
transfers (for upcoming changes). Pass in a transfer size and
a bool to know whether to use the size byte (like SMBus) or use
the length given (like I2C).
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1534796770-10295-3-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can assign and verify the address before realizing and trying to plug.
reading/writing the address property should never fail for DIMMs, so let's
reduce error handling a bit by using &error_abort. Getting access to the
memory region now might however fail. So forward errors from
get_memory_region() properly.
As all memory devices should use the alignment of the underlying memory
region for guest physical address asignment, do detection of the
alignment in pc_dimm_pre_plug(), but allow pc.c to overwrite the
alignment for compatibility handling.
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-5-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can assign and verify the slot before realizing and trying to plug.
reading/writing the slot property should never fail, so let's reduce
error handling a bit by using &error_abort.
To do this during pre_plug, add and use (x86, ppc) pc_dimm_pre_plug().
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180801133444.11269-2-david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for having vhost-scsi also make use of host_features,
move it from struct VHostUserSCSI into struct VHostSCSICommon.
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Message-Id: <20180808195235.5843-2-gedwards@ddn.com>
Reviewed-by: Felipe Franciosi <felipe@nutanix.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Iterating over the list without using atomics is undefined behaviour,
since the list can be modified concurrently by other threads (e.g.
every time a new thread is created in user-mode).
Fix it by implementing the CPU list as an RCU QTAILQ. This requires
a little bit of extra work to traverse list in reverse order (see
previous patch), but other than that the conversion is trivial.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-12-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's unnecessary because the pointer isn't dereferenced.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-3-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To avoid undefined behaviour.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Message-Id: <20180819091335.22863-2-cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The BQL is acquired via qemu_mutex_lock_iothread(), which makes
the profiler assign the associated wait time (i.e. most of
BQL wait time) entirely to that function. This loses the original
call site information, which does not help diagnose BQL contention.
Fix it by tracking the callers explicitly.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I first implemented this by deleting all entries in the global
hash table. But doing that safely slows down profiling, since
we'd need to introduce rcu_read_lock/unlock in the fast path.
What's implemented here avoids messing with the thread-local
data in the global hash table. It achieves this by taking a snapshot
of the current state, so that subsequent reports present the delta
wrt to the snapshot.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The goal of this module is to profile synchronization primitives (i.e.
mutexes, recursive mutexes and condition variables) so that scalability
issues can be quickly diagnosed.
Sync primitives are profiled by QSP based on the vaddr of the object accessed
as well as the call site (file:line_nr). That means the same object called
from two different call sites will be tracked in separate entries, which
might be reported together or separately (see subsequent commit on
call site coalescing).
Some perf numbers:
Host: Intel(R) Core(TM) i7-6700K CPU @ 4.00GHz
Command: taskset -c 0 tests/atomic_add-bench -d 5 -m
- Before: 54.80 Mops/s
- After: 54.75 Mops/s
That is, a negligible slowdown due to the now indirect call to
qemu_mutex_lock. Note that using a branch instead of an indirect
call introduces a more severe slowdown (53.65 Mops/s, i.e. 2% slowdown).
Enabling the profiler (with -p, added in this series) is more interesting:
- No profiling: 54.75 Mops/s
- W/ profiling: 12.53 Mops/s
That is, a 4.36X slowdown.
We can break down this slowdown by removing the get_clock calls or
the entry lookup:
- No profiling: 54.75 Mops/s
- W/o get_clock: 25.37 Mops/s
- W/o entry lookup: 19.30 Mops/s
- W/ profiling: 12.53 Mops/s
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixup some typos in the comments.
Signed-off-by: Julia Suvorova <jusual@mail.ru>
Message-Id: <20180813093402.10852-1-jusual@mail.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Try to hold src_page_req_mutex only if the queue is not
empty
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@tencent.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was not possible to compile out pvpanic. Use the same trick
than applesmc.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Here's my first ppc & spapr pull request for qemu-3.1. This contains
a bunch of things that have accumulated while 3.0 was in freeze.
Highlights are:
* SLOF firmware update
* A number of floating point cleanups from Richard Henderson and
Yasmin Beatriz
* A new model for assigning irq numbers on spapr, this is an
important preliminary step towards implementing the POWER9
"XIVE" interrupt controller
-----BEGIN PGP SIGNATURE-----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=viH7
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-3.1-20180821' into staging
ppc patch queue 2018-08-21
Here's my first ppc & spapr pull request for qemu-3.1. This contains
a bunch of things that have accumulated while 3.0 was in freeze.
Highlights are:
* SLOF firmware update
* A number of floating point cleanups from Richard Henderson and
Yasmin Beatriz
* A new model for assigning irq numbers on spapr, this is an
important preliminary step towards implementing the POWER9
"XIVE" interrupt controller
# gpg: Signature made Tue 21 Aug 2018 05:32:44 BST
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-3.1-20180821: (26 commits)
ppc: add DBCR based debugging
spapr_pci: factorize the use of SPAPR_MACHINE_GET_CLASS()
mac_newworld: don't use legacy fw_cfg_init_mem() function
mac_oldworld: don't use legacy fw_cfg_init_mem() function
40p: don't use legacy fw_cfg_init_mem() function
qemu-doc: mark ppc/prep machine as deprecated
hw/ppc: deprecate the machine type 'prep', replaced by '40p'
spapr: introduce a IRQ controller backend to the machine
hw/ppc/ppc405_uc: Convert away from old_mmio
hw/ppc/ppc_boards: Don't use old_mmio for ref405ep_fpga
hw/ppc/prep: Remove ifdeffed-out stub of XCSR code
spapr: introduce a fixed IRQ number space
spapr: Add a pseries-3.1 machine type
target/ppc: simplify bcdadd/sub functions
xics: don't include "target/ppc/cpu-qom.h" in "hw/ppc/xics.h"
vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages
target/ppc: bcdsub fix sign when result is zero
target/ppc: Use non-arithmetic conversions for fp load/store
target/ppc: Honor fpscr_ze semantics and tidy fre, fresqrt
target/ppc: Tidy helper_fsqrt
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJbepoTAAoJECgfDbjSjVRpLioH/3BPps8FLh4x2gZSq3B+u72O
RYUA3I3TilEGyc9yf8o7e1Hf+pQAJBEmulcnKxXFVWZIJ1GVLPt4NZCMQGiPDnJL
+RCT/Q64PUy09hRjddAasikrvXa4YOsRgBgJJToO7v9PSQSaU3fC7O3hNea7KcF/
C4SSqkUgxyDhCCYHHblpKxFz/wtwy4ZaCGSdozIdmKNPJ6/ye8wOQ1Mq9e1Mwp18
S6ilJub5IwB6aM2KVMmX4AFomF4u2cn153ts8fI+Dyo4/NE6P4+viDlz3BOBKdzm
kmd49h6/n4Lenoo4oI1yNHSuIJJTVfvnoLu6rG7mPbQKgxNd1uN4KuUIygU5PCY=
=Xcaj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc: fixes
This includes nvdimm persistence fixes queued before the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 20 Aug 2018 11:38:11 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
migration/ram: ensure write persistence on loading all data to PMEM.
migration/ram: Add check and info message to nvdimm post copy.
mem/nvdimm: ensure write persistence to PMEM in label emulation
hostmem-file: add the 'pmem' option
configure: add libpmem support
memory, exec: switch file ram allocation functions to 'flags' parameters
memory, exec: Expose all memory block related flags.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This proposal moves all the related IRQ routines of the sPAPR machine
behind a sPAPR IRQ backend interface 'spapr_irq' to prepare for future
changes. First of which will be to increase the size of the IRQ number
space, then, will follow a new backend for the POWER9 XIVE IRQ controller.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This proposal introduces a new IRQ number space layout using static
numbers for all devices, depending on a device index, and a bitmap
allocator for the MSI IRQ numbers which are negotiated by the guest at
runtime.
As the VIO device model does not have a device index but a "reg"
property, we introduce a formula to compute an IRQ number from a "reg"
value. It should minimize most of the collisions.
The previous layout is kept in pre-3.1 machines raising the
'legacy_irq_allocation' machine class flag.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The last user of the PowerPCCPU typedef in "hw/ppc/xics.h" vanished with
commit b1fd36c363. It isn't necessary to
include "target/ppc/cpu-qom.h" there anymore.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
At the moment the PPC64/pseries guest only supports 4K/64K/16M IOMMU
pages and POWER8 CPU supports the exact same set of page size so
so far things worked fine.
However POWER9 supports different set of sizes - 4K/64K/2M/1G and
the last two - 2M and 1G - are not even allowed in the paravirt interface
(RTAS DDW) so we always end up using 64K IOMMU pages, although we could
back guest's 16MB IOMMU pages with 2MB pages on the host.
This stores the supported host IOMMU page sizes in VFIOContainer and uses
this later when creating a new DMA window. This uses the system page size
(64k normally, 2M/16M/1G if hugepages used) as the upper limit of
the IOMMU pagesize.
This changes the type of @pagesize to uint64_t as this is what
memory_region_iommu_get_min_page_size() returns and clz64() takes.
There should be no behavioral changes on platforms other than pseries.
The guest will keep using the IOMMU page size selected by the PHB pagesize
property as this only changes the underlying hardware TCE table
granularity.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This option has been deprecated for two releases; remove it.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently our PL080/PL081 model uses a combination of the CPU's
address space (via cpu_physical_memory_{read,write}()) and the
system address space for performing DMA accesses.
For the PL081s in the MPS FPGA images, their DMA accesses
must go via Master Security Controllers. Switch the
PL080/PL081 model to take a MemoryRegion property which
defines its downstream for making DMA accesses.
Since the PL08x are only used in two board models, we
make provision of the 'downstream' link mandatory and convert
both users at once, rather than having it be optional with
a default to the system address space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The PL080 and PL081 have three outgoing interrupt lines:
* DMACINTERR signals DMA errors
* DMACINTTC is the DMA count interrupt
* DMACINTR is a combined interrupt, the logical OR of the other two
We currently only implement DMACINTR, because that's all the
realview and versatile boards needed, but the instances of the
PL081 in the MPS2 firmware images use all three interrupt lines.
Implement the missing DMACINTERR and DMACINTTC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Create a new include file for the pl081's device struct,
type macros, etc, so that it can be instantiated using
the "embedded struct" coding style.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
The Arm Cortex-M System Design Kit includes a simple watchdog module
based on a 32-bit down-counter. Implement this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The mmio_interface device was a purely internal artifact
of the implementation of the memory subsystem's request_ptr
APIs. Now that we have removed those APIs, we can remove
the mmio_interface device too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-4-peter.maydell@linaro.org
Remove the obsolete MMIO request_ptr APIs; they have no
users now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: KONRAD Frederic <frederic.konrad@adacore.com>
Message-id: 20180817114619.22354-3-peter.maydell@linaro.org
Generate an interrupt if USR2_RDR and UCR4_DREN are both set.
Signed-off-by: Hans-Erik Floryd <hans-erik.floryd@rt-labs.com>
Message-id: 1534341354-11956-1-git-send-email-hans-erik.floryd@rt-labs.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If a vfio assigned device makes use of a physical IOMMU, then memory
ballooning is necessarily inhibited due to the page pinning, lack of
page level granularity at the IOMMU, and sufficient notifiers to both
remove the page on balloon inflation and add it back on deflation.
However, not all devices are backed by a physical IOMMU. In the case
of mediated devices, if a vendor driver is well synchronized with the
guest driver, such that only pages actively used by the guest driver
are pinned by the host mdev vendor driver, then there should be no
overlap between pages available for the balloon driver and pages
actively in use by the device. Under these conditions, ballooning
should be safe.
vfio-ccw devices are always mediated devices and always operate under
the constraints above. Therefore we can consider all vfio-ccw devices
as balloon compatible.
The situation is far from straightforward with vfio-pci. These
devices can be physical devices with physical IOMMU backing or
mediated devices where it is unknown whether a physical IOMMU is in
use or whether the vendor driver is well synchronized to the working
set of the guest driver. The safest approach is therefore to assume
all vfio-pci devices are incompatible with ballooning, but allow user
opt-in should they have further insight into mediated devices.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
sparc32plus has 64bit long type but only 32bit virtual address space.
For instance, "apt-get upgrade" failed because of a mmap()/msync()
sequence.
mmap() returned 0xff252000 but msync() used g2h(0xffffffffff252000)
to find the host address. The "(target_ulong)" in g2h() doesn't fix the
address because it is 64bit long.
This patch introduces an "abi_ptr" that is set to uint32_t
if the virtual address space is addressed using 32bit in the linux-user
case. It stays set to target_ulong with softmmu case.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20180814171217.14680-1-laurent@vivier.eu>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[lv: added "%" in TARGET_ABI_FMT_ptr "%"PRIx64]
For the older machines (such as Mac and SPARC) the DT nodes representing
bootdevices for disk nodes are irregular for mainly historical reasons.
Since the majority of bootdevice nodes for these machines either do not have a
separate disk node or require different (custom) names then it is much easier
for processing to just disable all suffixes for a particular machine.
Introduce a new ignore_boot_device_suffixes MachineClass property to control
bootdevice suffix generation, defaulting to false in order to preserve
compatibility.
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20180810124027.10698-1-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJbdbIoAAoJENSXKoln91pl9KwIAJQ0CB4V/eRlvPOj828qLJyt
FxCETpCKBD1mSRX80E2HdYdaj8KfhhKrd9R2Wrk2VsiTQhLA0+hYsLxuT8VfPjsX
8WSN7egxzzA8Hzm1+wbwFCDNL13xjuhHWPk9YA1RYS6eQJot/Y27KYfvt/OPTrBO
jGaTmvXOE9q3qXZczP2TwipYkehg1+Ss5ZJl7dUmHc3Iek5t/H+kumkhBPoJqwAQ
wcwQuPm2KRGLuq9aB2IVbtfJA5Rme1GMFDWZicitJX2uK+Mx76fgi9IorrW6XAyM
6LM8DjvrivxW+UgZ+3QdJKkQCbyIrXqDAp1MRd3CWMlB576WWKm6RUTZclSo9gI=
=m1CJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-aug-2018' into staging
MIPS queue Aug 16, 2018
# gpg: Signature made Thu 16 Aug 2018 18:19:36 BST
# gpg: using RSA key D4972A8967F75A65
# gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65
* remotes/amarkovic/tags/mips-queue-aug-2018:
qemu-doc: Amend MIPS-related items
linux-user: Add preprocessor availability control to some syscalls
linux-user: Update MIPS syscall numbers up to kernel 4.18 headers
elf: Add ELF flags for MIPS machine variants
elf: Remove duplicate preprocessor constant definition
target/mips: Check ELPA flag only in some cases of MFHC0 and MTHC0
target/mips: Don't update BadVAddr register in Debug Mode
target/mips: Implement CP0 Config1.WR bit functionality
target/mips: Add CP0 BadInstrX register
target/mips: Update some CP0 registers bit definitions
target/mips: Fix two instances of shadow variables
target/mips: Mark switch fallthroughs with interpretable comments
target/mips: Avoid case statements formulated by ranges - part 2
target/mips: Avoid case statements formulated by ranges - part 1
MAINTAINERS: Update target/mips maintainer's email addresses
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>