This corrects a bug introduced in my previous fix for SSE4.2 pcmpestri
/ pcmpestrm / pcmpistri / pcmpistrm substring search, commit
ae35eea7e4.
That commit fixed a bug that showed up in four GCC tests with one libc
implementation. The tests in question generate random inputs to the
intrinsics and compare results to a C implementation, but they only
test 1024 possible random inputs, and when the tests use the cases of
those instructions that work with word rather than byte inputs, it's
easy to have problematic cases that show up much less frequently than
that. Thus, testing with a different libc implementation, and so a
different random number generator, showed up a problem with the
previous patch.
When investigating the previous test failures, I found the description
of these instructions in the Intel manuals (starting from computing a
16x16 or 8x8 set of comparison results) confusing and hard to match up
with the more optimized implementation in QEMU, and referred to AMD
manuals which described the instructions in a different way. Those
AMD descriptions are very explicit that the whole of the string being
searched for must be found in the other operand, not running off the
end of that operand; they say "If the prototype and the SUT are equal
in length, the two strings must be identical for the comparison to be
TRUE.". However, that statement is incorrect.
In my previous commit message, I noted:
The operation in this case is a search for a string (argument d to
the helper) in another string (argument s to the helper); if a copy
of d at a particular position would run off the end of s, the
resulting output bit should be 0 whether or not the strings match in
the region where they overlap, but the QEMU implementation was
wrongly comparing only up to the point where s ends and counting it
as a match if an initial segment of d matched a terminal segment of
s. Here, "run off the end of s" means that some byte of d would
overlap some byte outside of s; thus, if d has zero length, it is
considered to match everywhere, including after the end of s.
The description "some byte of d would overlap some byte outside of s"
is accurate only when understood to refer to overlapping some byte
*within the 16-byte operand* but at or after the zero terminator; it
is valid to run over the end of s if the end of s is the end of the
16-byte operand. So the fix in the previous patch for the case of d
being empty was correct, but the other part of that patch was not
correct (as it never allowed partial matches even at the end of the
16-byte operand). Nor was the code before the previous patch correct
for the case of d nonempty, as it would always have allowed partial
matches at the end of s.
Fix with a partial revert of my previous change, combined with
inserting a check for the special case of s having maximum length to
determine where it is necessary to check for matches.
In the added test, test 1 is for the case of empty strings, which
failed before my 2017 patch, test 2 is for the bug introduced by my
2017 patch and test 3 deals with the case where a match of an initial
segment at the end of the string is not valid when the string ends
before the end of the 16-byte operand (that is, the case that would be
broken by a simple revert of the non-empty-string part of my 2017
patch).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2006121344290.9881@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most x87 instruction implementations fail to raise the expected IEEE
floating-point exceptions because they do nothing to convert the
exception state from the softfloat machinery into the exception flags
in the x87 status word. There is special-case handling of division to
raise the divide-by-zero exception, but that handling is itself buggy:
it raises the exception in inappropriate cases (inf / 0 and nan / 0,
which should not raise any exceptions, and 0 / 0, which should raise
"invalid" instead).
Fix this by converting the floating-point exceptions raised during an
operation by the softfloat machinery into exceptions in the x87 status
word (passing through the existing fpu_set_exception function for
handling related to trapping exceptions). There are special cases
where some functions convert to integer internally but exceptions from
that conversion are not always correct exceptions for the instruction
to raise.
There might be scope for some simplification if the softfloat
exception state either could always be assumed to be in sync with the
state in the status word, or could always be ignored at the start of
each instruction and just set to 0 then; I haven't looked into that in
detail, and it might run into interactions with the various ways the
emulation does not yet handle trapping exceptions properly. I think
the approach taken here, of saving the softfloat state, setting
exceptions there to 0 and then merging the old exceptions back in
after carrying out the operation, is conservatively safe.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005152120280.3469@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fist / fistt family of instructions should all store the most
negative integer in the destination format when the rounded /
truncated integer result is out of range or the input is an invalid
encoding, infinity or NaN. The fisttpl and fisttpll implementations
(32-bit and 64-bit results, truncate towards zero) failed to do this,
producing the most positive integer in some cases instead. Fix this
by copying the code used to handle this issue for fistpl and fistpll,
adjusted to use the _round_to_zero functions for the actual
conversion (but without any other changes to that code).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005152119160.3469@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation fails to check for out-of-range and invalid
values, instead just taking the result of conversion to int64_t and
storing its sign and low 18 decimal digits. Fix this by checking for
an out-of-range result (invalid conversions always result in INT64_MAX
or INT64_MIN from the softfloat code, which are large enough to be
considered as out-of-range by this code) and storing the packed BCD
indefinite encoding in that case.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132351110.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fbstp implementation stores +0 when the rounded result should be
-0 because it compares an integer value with 0 to determine the sign.
Fix this by checking the sign bit of the operand instead.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132350230.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fxam implementation does not check for invalid encodings, instead
treating them like NaN or normal numbers depending on the exponent.
Fix it to check that the high bit of the significand is set before
treating an encoding as NaN or normal, thus resulting in correct
handling (all of C0, C2 and C3 cleared) for invalid encodings.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005132349311.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementations of the fldl2t, fldl2e, fldpi, fldlg2 and fldln2
instructions load fixed constants independent of the rounding mode.
Fix them to load a value correctly rounded for the current rounding
mode (but always rounded to 64-bit precision independent of the
precision control, and without setting "inexact") as specified.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <alpine.DEB.2.21.2005132348310.11687@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation uses floatx80_scalbn for the final scaling
operation. floatx80_scalbn ends up rounding the result using the
dynamic rounding precision configured for the FPU. But only a limited
set of x87 floating-point instructions are supposed to respect the
dynamic rounding precision, and fscale is not in that set. Fix the
implementation to save and restore the rounding precision around the
call to floatx80_scalbn.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045430.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation passes infinite exponents through to generic
code that rounds the exponent to a 32-bit integer before using
floatx80_scalbn. In round-to-nearest mode, and ignoring exceptions,
this works in many cases. But it fails to handle the special cases of
scaling 0 by a +Inf exponent or an infinity by a -Inf exponent, which
should produce a NaN, and because it produces an inexact result for
finite nonzero numbers being scaled, the result is sometimes incorrect
in other rounding modes. Add appropriate handling of infinite
exponents to produce a NaN or an appropriately signed exact zero or
infinity as a result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070045010.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fscale implementation does not check for invalid encodings in the
exponent operand, thus treating them like INT_MIN (the value returned
for invalid encodings by floatx80_to_int32_round_to_zero). Fix it to
treat them similarly to signaling NaN exponents, thus generating a
quiet NaN result.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070044190.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fscale instruction returns a NaN exponent
unchanged. Fix it to return a quiet NaN when the provided exponent is
a signaling NaN.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005070043330.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The implementation of the fxtract instruction treats all nonzero
operands as normal numbers, so yielding incorrect results for invalid
formats, infinities, NaNs and subnormal and pseudo-denormal operands.
Implement appropriate handling of all those cases.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <alpine.DEB.2.21.2005070042360.18350@digraph.polyomino.org.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The COMMPAGE are a number of kernel provided user-space routines for
32 bit ARM systems. Add a basic series of smoke tests to ensure it is
working as it should.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200605154929.26910-14-alex.bennee@linaro.org>
Based on the original testcase by Nikolay Igotti.
Message-ID: <CAEme+7GLKg_dNsHizzTKDymX9HyD+Ph2iZ=WKhOw2XG+zhViXg@mail.gmail.com>
Signed-off-by: Nikolay Igotti <igotti@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200520140541.30256-15-alex.bennee@linaro.org>
As we enable newer features that we want to test on arm64 targets we
need newer compilers. Split off a new debian-arm64-test-cross image
which we can use to build these new tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-11-alex.bennee@linaro.org>
While we may gamely give the right information it can still confuse
the wide range of GDBs out there. For example ppc64abi32-linux-user
reports:
warning: Selected architecture powerpc:common is not compatible with reported target architecture powerpc:common64
warning: Architecture rejected target-supplied description
but still connects. Add a test for a 0 pc and exit early if that is
the case. This may actually be a bug we need to fix?
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-8-alex.bennee@linaro.org>
I'm not sure when this broke but we should use EXTRA_RUNS for
"virtual" tests which are not generated from the binary names.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200520140541.30256-5-alex.bennee@linaro.org>
The softfloat function floatx80_round_to_int incorrectly handles the
case of a pseudo-denormal where only the high bit of the significand
is set, ignoring that bit (treating the number as an exact zero)
rather than treating the number as an alternative representation of
+/- 2^-16382 (which may round to +/- 1 depending on the rounding mode)
as hardware does. Fix this check (simplifying the code in the
process).
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042339420.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softfloat floatx80 comparisons fail to allow for pseudo-denormals,
which should compare equal to corresponding values with biased
exponent 1 rather than 0. Add an adjustment for that case when
comparing numbers with the same sign.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042338470.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The softfloat function addFloatx80Sigs, used for addition of values
with the same sign and subtraction of values with opposite sign, fails
to handle the case where the two values both have biased exponent zero
and there is a carry resulting from adding the significands, which can
occur if one or both values are pseudo-denormals (biased exponent
zero, explicit integer bit 1). Add a check for that case, so making
the results match those seen on x86 hardware for pseudo-denormals.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042337570.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Conversions between IEEE floating-point formats should convert
signaling NaNs to quiet NaNs. Most of those in QEMU's softfloat code
do so, but those for floatx80 fail to. Fix those conversions to
silence signaling NaNs as well.
Signed-off-by: Joseph Myers <joseph@codesourcery.com>
Message-Id: <alpine.DEB.2.21.2005042336170.22972@digraph.polyomino.org.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When the gdbstub code was converted to the new API we missed a few
snafus in the various guests. Add a simple gdb test script which can
be used on all our linux-user guests to check for obvious failures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200430190122.4592-9-alex.bennee@linaro.org>
This test seems flaky and reports attachment even when we failed to
negotiate the architecture. However the fetching of the guest
architecture will fail tripping up the gdb AttributeError which will
trigger our early no error status exit from the test
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-5-alex.bennee@linaro.org>
It seems older and non-multiarach aware GDBs might not fail gracefully
when faced with something they don't know. For example when faced with
a target XML for s390x the Ubuntu 18.04 gdb will generate an internal
fault and prompt for a core dump.
Work around this by invoking GDB in a more batch orientated way and
then trying to filter out between test failures and gdb failures.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200430190122.4592-4-alex.bennee@linaro.org>
We are not using them and they just get in the way.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200403191150.863-4-alex.bennee@linaro.org>
This test exercises the gdbstub while runing the sve-iotcl test. I
haven't plubmed it into make system as we need a way of verifying if
gdb has the right support for SVE.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200316172155.971-26-alex.bennee@linaro.org>
This is a fairly bare-bones test of setting the various vector sizes
for SVE which will only fail if the PR_SVE_SET_VL can't reduce the
user-space vector length by powers of 2.
However we will also be able to use it in a future test which
exercises the GDB stub.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-25-alex.bennee@linaro.org>
A very simple test case which sets and reads SVE registers while
running a test case. We don't really need to compile a SVE binary for
this case but we will later so keep it simple for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200316172155.971-24-alex.bennee@linaro.org>
This tests a bunch of registers that the kernel allows userspace to
read including the CPUID registers. We need a SVE aware compiler as we
are testing the id_aa64zfr0_el1 register in the set.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200316172155.971-21-alex.bennee@linaro.org>
Make the output just a bit prettier when running by hand.
Cc: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200229012811.24129-13-richard.henderson@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Pointer authentication isn't perfect so measure the percentage of
failed checks. As we want to vary the pointer we work through a bunch
of different addresses.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-20-alex.bennee@linaro.org>
Although most people use the docker images this can trip up on
developer systems with actual valid cross-compilers!
Fixes: bb516dfc5b
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200225124710.14152-19-alex.bennee@linaro.org>
When combined with heavy plugins we occasionally hit the timeouts.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200225124710.14152-17-alex.bennee@linaro.org>
If we have plugins enabled we still need to have built the test to be
able to run it.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
Message-Id: <20200225124710.14152-2-alex.bennee@linaro.org>
Otherwise we end up failing to build our tests on CI which may have
older compilers that the user expects. We can get rid of this once we
can fallback to multiarch containers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200203090932.19147-14-alex.bennee@linaro.org>
We will need this for some tests later. The docker images already
support it by default.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200203090932.19147-13-alex.bennee@linaro.org>
Perform the set of operations and test described in LP 1859713.
Suggested-by: Adrien GRASSEIN <adrien.grassein@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-5-richard.henderson@linaro.org
[PMM: fixed hard-coded tabs]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is the test vector from the QARMA paper, run through PACGA.
Suggested-by: Vincent Dehors <vincent.dehors@smile.fr>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200116230809.19078-4-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We were incorrectly requiring ARMv8.4 support for the pauth
tests, but Pointer Authentication is an ARMv8.3 extension.
Further, hiding the required architecture within asm() is
not correct.
Correct the architecture version requested, and specify it
in the cflags of the (cross-) compiler rather than in the asm.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200116230809.19078-3-richard.henderson@linaro.org
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
There are linux-user users of semihosting so we'd better check things
work for them as well.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
There are two types of ARM semicall - lets test them both. Putting the
logic in a header will make re-using the functions easier later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We don't run this during check-tcg as we would need to check stuff is
echoed back. However we can still build the binary so people can test
it manually.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We were only doing this if docker was enabled which isn't quite right.
Fixes: fc76c56d3f
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20191211170520.7747-17-alex.bennee@linaro.org>
Our docker infrastructure isn't quite as multiarch as we would wish so
lets allow the user to disable it if they want. This will allow us to
use still run check-tcg on non-x86 CI setups.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Cleber Rosa <crosa@redhat.com>
Tested-by: Cleber Rosa <crosa@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
If CONFIG_PLUGINS is enabled then lets enable testing for all our TCG
targets. This is a simple smoke test that ensure we don't crash or
otherwise barf out by running each plugin against each test.
There is a minor knock on effect for additional runners which need
specialised QEMU_OPTS which will also need to declare a plugin version
of the runner. If this gets onerous we might need to add another
helper.
Checking the results of the plugins is left for a later exercise.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
This is a very slow running test which we only enable explicitly.
However having it in the TESTS lists would confuse additional tests
like the plugins test which want to run on all currently enabled
tests.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Otherwise clever expanders like the plugins test get unstuck.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
