This makes VMDK support blockdev-create. The implementation reuses the
image creation code in vmdk_co_create_opts which now acceptes a callback
pointer to "retrieve" BlockBackend pointers from the caller. This way we
separate the logic between file/extent acquisition and initialization.
The QAPI command parameters are mostly the same as the old create_opts
except the dropped legacy @compat6 switch, which is redundant with
@hwversion.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The extracted vmdk_init_extent takes a BlockBackend object and
initializes the format metadata. It is the common part between "qemu-img
create" and "blockdev-create".
Add a "BlockBackend *pbb" parameter to vmdk_create_extent, to return the
opened BB to the caller in the next patch.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test waits for a MIGRATION event with status=completed on the
source VM before querying the migration status on both source and
destination. However, just because the source says migration has
completed does not mean the destination thinks the same. Therefore, in
some cases, the destination VM may still report "active" instead of
"completed" when asked for its migration status.
Fix this by enabling migration events on both VMs and waiting until both
source and destination emit a status=completed MIGRATION event.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In the block layer, synchronous APIs are often implemented by creating a
coroutine that calls the asynchronous coroutine-based implementation and
then waiting for completion with BDRV_POLL_WHILE().
For this to work with iothreads (more specifically, when the synchronous
API is called in a thread that is not the home thread of the block
device, so that the coroutine will run in a different thread), we must
make sure to call aio_wait_kick() at the end of the operation. Many
places are missing this, so that BDRV_POLL_WHILE() keeps hanging even if
the condition has long become false.
Note that bdrv_dec_in_flight() involves an aio_wait_kick() call. This
corresponds to the BDRV_POLL_WHILE() in the drain functions, but it is
generally not enough for most other operations because they haven't set
the return value in the coroutine entry stub yet. To avoid race
conditions there, we need to kick after setting the return value.
The race window is small enough that the problem doesn't usually surface
in the common path. However, it does surface and causes easily
reproducible hangs if the operation can return early before even calling
bdrv_inc/dec_in_flight, which many of them do (trivial error or no-op
success paths).
The bug in bdrv_truncate(), bdrv_check() and bdrv_invalidate_cache() is
slightly different: These functions even neglected to schedule the
coroutine in the home thread of the node. This avoids the hang, but is
obviously wrong, too. Fix those to schedule the coroutine in the right
AioContext in addition to adding aio_wait_kick() calls.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Patch created mechanically by rerunning:
$ spatch --sp-file scripts/coccinelle/qobject.cocci \
--macro-file scripts/cocci-macro-file.h \
--dir block --in-place
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Recently, some bugs in dmg file have been fixed. To prevent reading dmg
is broken someday in the future, add a simple test which ensures the
conversion from dmg to raw should not hang or face any I/O error.
Signed-off-by: yuchenlin <npes87184@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Refcount table entries have a field to store the offset of the
refcount block. The rest of the bits of the entry are currently
reserved.
The offset is always taken from the entry using REFT_OFFSET_MASK to
ensure that we only use the bits that belong to that field.
While that mask is used every time we read from the refcount table, it
is never used when we write to it. Due to the other constraints of the
qcow2 format QEMU can never produce refcount block offsets that don't
fit in that field so any such offset when allocating a refcount block
would indicate a bug in QEMU.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The mirror_start_job() function used for the commit-active job blocks
the source, target and all intermediate nodes for the duration of the
job.
target <- intermediate <- source
Since 4ef85a9c23 this function creates a dummy mirror_top_bs that
goes on top of the source node, and it is this dummy node that gets
blocked instead. The source node is never blocked or added to the
job's list of nodes.
target <- intermediate <- source <- mirror_top
At the moment I don't think it is possible to exploit this problem
because any additional job on 'source' would either be forbidden for
other reasons or it would need to involve an additional node that is
blocked, causing an error.
This can be seen in the error messages, however, because they never
refer to the source node being blocked:
$ qemu-img create -f qcow2 hd0.qcow2 1M
$ qemu-img create -f qcow2 -b hd0.qcow2 hd1.qcow2
$ qemu-io -c 'write 0 1M' hd0.qcow2
$ $QEMU -drive if=none,file=hd1.qcow2,node-name=hd1
{ "execute": "qmp_capabilities" }
{ "execute": "block-commit", "arguments": {"device": "hd1", "speed": 256}}
{ "execute": "block-stream", "arguments": {"device": "hd1"}}
{ "error": {"class": "GenericError",
"desc": "Node 'hd0' is busy: block device is in use by block job: commit"}}
After this patch the error message refers to 'hd1', as it should.
The expected output of iotest 141 also needs to be updated for the
same reason.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
At the moment I don't see how to make this function fail after the
dirty bitmap has been created, but if that was possible then we would
hit the assert(QLIST_EMPTY(&bs->dirty_bitmaps)) in bdrv_close().
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
SDL1.2 was deprecated in the 2.12.0 release with:
commit e52c6ba341
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Mon Jan 15 14:25:33 2018 +0000
ui: deprecate use of SDL 1.2 in favour of 2.0 series
The SDL 2.0 release was made in Aug, 2013:
https://www.libsdl.org/release/
That will soon be 4 + 1/2 years ago, which is enough time to consider
the 2.0 series widely supported.
Thus we deprecate the SDL 1.2 support, which will allow us to delete it
in the last release of 2018. By this time, SDL 2.0 will be more than 5
years old.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20180115142533.24585-1-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It is thus able to be removed in the 3.1.0 release.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20180822131554.3398-4-berrange@redhat.com>
[ kraxel: rebase ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Move the complexity of milkymist_tmu2_create() into the
source file. Doing so we avoid to include the X11/OpenGL
headers in all LM32 devices, and we also avoid the duplicate
declaration of glx_fbconfig_attr[] (it is already declared
in hw/display/milkymist-tmu2.c).
Since TYPE_MILKYMIST_TMU2 is now accessible, use it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-5-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The TMU device requires both X11 and OpenGL.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-4-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 5f9b1e3506 remove the dependency between OpenGL and X11.
However the milkymist-tmu2 device do require X11.
When using SDL, the configure script sets need_x11=yes, so the X11
flags are populated to the makefiles.
When building without SDL, X11 is not pulled and populated, leading
to a link failure:
LINK lm32-softmmu/qemu-system-lm32
hw/lm32/milkymist.o: In function `milkymist_tmu2_create':
hw/lm32/milkymist-hw.h:114: undefined reference to `XOpenDisplay'
hw/lm32/milkymist-hw.h:140: undefined reference to `XFree'
hw/lm32/milkymist-hw.h:141: undefined reference to `XCloseDisplay'
hw/lm32/milkymist-hw.h:130: undefined reference to `XCloseDisplay'
../hw/display/milkymist-tmu2.o: In function `tmu2_glx_init':
hw/display/milkymist-tmu2.c:112: undefined reference to `XOpenDisplay'
hw/display/milkymist-tmu2.c:123: undefined reference to `XFree'
collect2: error: ld returned 1 exit status
gmake[1]: *** [Makefile:199: qemu-system-lm32] Error 1
Enforce the X11 dependency when the LM32 target is built.
This will allow us to build QEMU without SDL.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-3-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The Milkymist specific hardware is only used by the LM32 target,
it is pointless to compile those objects in other targets.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190130120005.23123-2-philmd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
- New debugging QMP command to explore block graphs
- Converted DPRINTF()s to trace events
- Fixed qemu-io's use of getopt() for systems with optreset
- Minor NVMe emulation fixes
- An iotest fix
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcUkaiAAoJEPQH2wBh1c9AHsEIAIU0+FNjtdz7lNgyeBCSFCFa
/qWNk4+w6QBfhTTx/N0hGwh5/FvNYQhby8VHtZitE4/QcLbJwHYgWf14pwce3tP3
3qNB87AdQpKMpbajQM2x2Xy8lnlPeM7fe21Q/12vuX7AlEDT3gH+W9rg94bw2oFN
r+xBk6H5F2aVElw3CwMM7eary4+dPnnCQwAnoqM+g5hdpL+0scrIyARGw7v0hmSn
LDWESCM4a55lEYmwj1wS3J3uj6Fj00yzBvcEuCcT1GO+lXlV8/ciO9r2HqxVKwgz
4GAi/BERoMKjfn+/77/yI5flprPx2voNGgkyBY4C3z9ncnN6u02QBZSusBIWpSg=
=Kt4r
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/xanclic/tags/pull-block-2019-01-31' into staging
Block patches:
- New debugging QMP command to explore block graphs
- Converted DPRINTF()s to trace events
- Fixed qemu-io's use of getopt() for systems with optreset
- Minor NVMe emulation fixes
- An iotest fix
# gpg: Signature made Thu 31 Jan 2019 00:51:46 GMT
# gpg: using RSA key F407DB0061D5CF40
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/xanclic/tags/pull-block-2019-01-31:
iotests: Allow 147 to be run concurrently
iotests: Bind qemu-nbd to localhost in 147
iotests.py: Add qemu_nbd_pipe()
nvme: use pci_dev directly in nvme_realize
nvme: ensure the num_queues is not zero
nvme: use TYPE_NVME instead of constant string
qemu-io: Add generic function for reinitializing optind.
block/sheepdog: Convert from DPRINTF() macro to trace events
block/file-posix: Convert from DPRINTF() macro to trace events
block/curl: Convert from DPRINTF() macro to trace events
block/ssh: Convert from DPRINTF() macro to trace events
scripts: add render_block_graph function for QEMUMachine
qapi: add x-debug-query-block-graph
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- code clean-up
- LGPL information clean-up
- fix typo (acpi)
-----BEGIN PGP SIGNATURE-----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=1OOM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-pull-request' into staging
- add device category (edu, i8042, sd memory card)
- code clean-up
- LGPL information clean-up
- fix typo (acpi)
# gpg: Signature made Wed 30 Jan 2019 13:21:50 GMT
# gpg: using RSA key F30C38BD3F2FBE3C
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-pull-request:
virtio-blk: remove duplicate definition of VirtIOBlock *s pointer
hw/block: clean up stale xen_disk trace entries
target/m68k: Fix LGPL information in the file headers
target/s390x: Fix LGPL version in the file header comments
tcg: Fix LGPL version number
target/tricore: Fix LGPL version number
target/openrisc: Fix LGPL version number
COPYING.LIB: Synchronize the LGPL 2.1 with the version from gnu.org
Don't talk about the LGPL if the file is licensed under the GPL
hw: sd: set category of the sd memory card
hw: input: set category of the i8042 device
typo: apci->acpi
hw: edu: set category of the edu device
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
User-visible changes:
* The new qemu-trace-stap script makes it convenient to collect traces without
writing SystemTap scripts. See "man qemu-trace-stap" for details.
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJcURdlAAoJEJykq7OBq3PIPqAH/iSkYDDeWLQy4eqeTPpbsxd4
U6mUYC/m2g1bevj1TxdFmr2g5LReGTd4w35w6/SUaLMHsu701T7gK+0z1gP2/N/D
qzJiM9xxF6xYq1P4hWJGf+XsbJ0OVf7oRwn1j8qXVBxjIxERX98z0ZUtbk/aulGi
wnNXycBufpKGk2PkQC+pBfhU2775dMqpUV49z9mqyVzsiZQlzbx8WMDQj1Ic1fbe
ZcAvX5D350HJjB3Z+9wJ1V2pC9Gu+z3TIup+YR1Bkch0ywyTCVTqcepoOXwzQamm
84bifPdObBm7SbbwtrwoVKYLrdIrbb3PTWaOlWVUKruKIIf8hzn5BxC3wChb2Qk=
=bex6
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging
Pull request
User-visible changes:
* The new qemu-trace-stap script makes it convenient to collect traces without
writing SystemTap scripts. See "man qemu-trace-stap" for details.
# gpg: Signature made Wed 30 Jan 2019 03:17:57 GMT
# gpg: using RSA key 9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: rerun tracetool after ./configure changes
trace: improve runstate tracing
trace: add ability to do simple printf logging via systemtap
trace: forbid use of %m in trace event format strings
trace: enforce that every trace-events file has a final newline
display: ensure qxl log_buf is a nul terminated string
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
To do this, we need to allow creating the NBD server on various ports
instead of a single one (which may not even work if you run just one
instance, because something entirely else might be using that port).
So we just pick a random port in [32768, 32768 + 1024) and try to create
a server there. If that fails, we just retry until something sticks.
For the IPv6 test, we need a different range, though (just above that
one). This is because "localhost" resolves to both 127.0.0.1 and ::1.
This means that if you bind to it, it will bind to both, if possible, or
just one if the other is already in use. Therefore, if the IPv6 test
has already taken [::1]:some_port and we then try to take
localhost:some_port, that will work -- only the second server will be
bound to 127.0.0.1:some_port alone and not [::1]:some_port in addition.
So we have two different servers on the same port, one for IPv4 and one
for IPv6.
But when we then try to connect to the server through
localhost:some_port, we will always end up at the IPv6 one (as long as
it is up), and this may not be the one we want.
Thus, we must make sure not to create an IPv6-only NBD server on the
same port as a normal "dual-stack" NBD server -- which is done by using
distinct port ranges, as explained above.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221234750.23577-4-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
By default, qemu-nbd binds to 0.0.0.0. However, we then proceed to
connect to "localhost". Usually, this works out fine; but if this test
is run concurrently, some other test function may have bound a different
server to ::1 (on the same port -- you can bind different serves to the
same port, as long as one is on IPv4 and the other on IPv6).
So running qemu-nbd works, it can bind to 0.0.0.0:NBD_PORT. But
potentially a concurrent test has successfully taken [::1]:NBD_PORT. In
this case, trying to connect to "localhost" will lead us to the IPv6
instance, where we do not want to end up.
Fix this by just binding to "localhost". This will make qemu-nbd error
out immediately and not give us cryptic errors later.
(Also, it will allow us to just try a different port as of a future
patch.)
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221234750.23577-3-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
In some cases, we may want to deal with qemu-nbd errors (e.g. by
launching it in a different configuration until it no longer throws
any). In that case, we do not want its output ending up in the test
output.
It may still be useful for handling the error, though, so add a new
function that works basically like qemu_nbd(), only that it returns the
qemu-nbd output instead of making it end up in the log. In contrast to
qemu_img_pipe(), it does still return the exit code as well, though,
because that is even more important for error handling.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221234750.23577-2-mreitz@redhat.com
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
There is no need to make another reference.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190120055558.32984-4-liq3ea@163.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
When it is zero, it causes segv.
Using following command:
"-drive file=//home/test/test1.img,if=none,id=id0
-device nvme,drive=id0,serial=test,num_queues=0"
causes following Backtrack:
Thread 4 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffe9735700 (LWP 30952)]
0x0000555555a7a77c in nvme_start_ctrl (n=0x5555577473f0) at hw/block/nvme.c:825
825 if (unlikely(n->cq[0])) {
(gdb) bt
0 0x0000555555a7a77c in nvme_start_ctrl (n=0x5555577473f0)
at hw/block/nvme.c:825
1 0x0000555555a7af7f in nvme_write_bar (n=0x5555577473f0, offset=20,
data=4587521, size=4) at hw/block/nvme.c:969
2 0x0000555555a7b81a in nvme_mmio_write (opaque=0x5555577473f0, addr=20,
data=4587521, size=4) at hw/block/nvme.c:1163
3 0x0000555555869236 in memory_region_write_accessor (mr=0x555557747cd0,
addr=20, value=0x7fffe97320f8, size=4, shift=0, mask=4294967295, attrs=...)
at /home/test/qemu1/qemu/memory.c:502
4 0x0000555555869446 in access_with_adjusted_size (addr=20,
value=0x7fffe97320f8, size=4, access_size_min=2, access_size_max=8,
access_fn=0x55555586914d <memory_region_write_accessor>,
mr=0x555557747cd0, attrs=...) at /home/test/qemu1/qemu/memory.c:568
5 0x000055555586c479 in memory_region_dispatch_write (mr=0x555557747cd0,
addr=20, data=4587521, size=4, attrs=...)
at /home/test/qemu1/qemu/memory.c:1499
6 0x00005555558030af in flatview_write_continue (fv=0x7fffe0061130,
addr=4273930260, attrs=..., buf=0x7ffff7ff0028 "\001", len=4, addr1=20,
l=4, mr=0x555557747cd0) at /home/test/qemu1/qemu/exec.c:3234
7 0x00005555558031f9 in flatview_write (fv=0x7fffe0061130, addr=4273930260,
attrs=..., buf=0x7ffff7ff0028 "\001", len=4)
at /home/test/qemu1/qemu/exec.c:3273
8 0x00005555558034ff in address_space_write (
---Type <return> to continue, or q <return> to quit---
as=0x555556758480 <address_space_memory>, addr=4273930260, attrs=...,
buf=0x7ffff7ff0028 "\001", len=4) at /home/test/qemu1/qemu/exec.c:3363
9 0x0000555555803550 in address_space_rw (
as=0x555556758480 <address_space_memory>, addr=4273930260, attrs=...,
buf=0x7ffff7ff0028 "\001", len=4, is_write=true)
at /home/test/qemu1/qemu/exec.c:3374
10 0x00005555558884a1 in kvm_cpu_exec (cpu=0x555556920e40)
at /home/test/qemu1/qemu/accel/kvm/kvm-all.c:2031
11 0x000055555584cd9d in qemu_kvm_cpu_thread_fn (arg=0x555556920e40)
at /home/test/qemu1/qemu/cpus.c:1281
12 0x0000555555dbaf6d in qemu_thread_start (args=0x5555569438a0)
at util/qemu-thread-posix.c:502
13 0x00007ffff5dc86db in start_thread (arg=0x7fffe9735700)
at pthread_create.c:463
14 0x00007ffff5af188f in clone ()
at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190120055558.32984-3-liq3ea@163.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190120055558.32984-2-liq3ea@163.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
On FreeBSD 11.2:
$ nbdkit memory size=1M --run './qemu-io -f raw -c "aio_write 0 512" $nbd'
Parsing error: non-numeric argument, or extraneous/unrecognized suffix -- aio_write
After main option parsing, we reinitialize optind so we can parse each
command. However reinitializing optind to 0 does not work on FreeBSD.
What happens when you do this is optind remains 0 after the option
parsing loop, and the result is we try to parse argv[optind] ==
argv[0] == "aio_write" as if it was the first parameter.
The FreeBSD manual page says:
In order to use getopt() to evaluate multiple sets of arguments, or to
evaluate a single set of arguments multiple times, the variable optreset
must be set to 1 before the second and each additional set of calls to
getopt(), and the variable optind must be reinitialized.
(From the rest of the man page it is clear that optind must be
reinitialized to 1).
The glibc man page says:
A program that scans multiple argument vectors, or rescans the same
vector more than once, and wants to make use of GNU extensions such as
'+' and '-' at the start of optstring, or changes the value of
POSIXLY_CORRECT between scans, must reinitialize getopt() by resetting
optind to 0, rather than the traditional value of 1. (Resetting to 0
forces the invocation of an internal initialization routine that
rechecks POSIXLY_CORRECT and checks for GNU extensions in optstring.)
This commit introduces an OS-portability function called
qemu_reset_optind which provides a way of resetting optind that works
on FreeBSD and platforms that use optreset, while keeping it the same
as now on other platforms.
Note that the qemu codebase sets optind in many other places, but in
those other places it's setting a local variable and not using getopt.
This change is only needed in places where we are using getopt and the
associated global variable optind.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Message-id: 20190118101114.11759-2-rjones@redhat.com
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181213162727.17438-5-lvivier@redhat.com
[mreitz: Fixed sheepdog_snapshot_create_inode's format string to use
PRIx32 for uint32_ts]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181213162727.17438-3-lvivier@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20181213162727.17438-2-lvivier@redhat.com
[mreitz: Fixed type of ssh_{read,write}_return's parameter to be ssize_t
instead of size_t]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Render block nodes graph with help of graphviz. This new function is
for debugging, so there is no sense to put it into qemu.py as a method
of QEMUMachine. Let's instead put it separately.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20181221170909.25584-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Add a new command, returning block nodes (and their users) graph.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20181221170909.25584-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
VirtIOBlock *s is already defined and initialized with req->dev
on top of virtio_blk_handle_request(), so we can remove it from
the code block of VIRTIO_BLK_T_GET_ID case.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190130095231.42081-1-sgarzare@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This should have been removed then xen_disk.c was removed but I missed them.
Fixes: 19f87870ba
xen: remove the legacy 'xen_disk' backend
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190122145132.12571-1-paul.durrant@citrix.com>
[lv: s/stake/stale/ and add "Fixes" tag]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's either "GNU *Library* General Public License version 2" or
"GNU Lesser General Public License version *2.1*", but there was
no "version 2.0" of the "Lesser" license. So assume that version
2.1 is meant here.
Also some files mention the GPL instead of the LGPL after declaring
that the files are licensed under the LGPL, so change these spots to
use LGPL, too.
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548769438-28942-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's either "GNU *Library* General Public License version 2" or
"GNU Lesser General Public License version *2.1*", but there was
no "version 2.0" of the "Lesser" license. So assume that version
2.1 is meant here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <1548769067-20792-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's either "GNU *Library* General Public version 2" or "GNU Lesser
General Public version *2.1*", but there was no "version 2.0" of the
"Lesser" library. So assume that version 2.1 is meant here.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1548252536-6242-5-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's either "GNU *Library* General Public version 2" or "GNU Lesser
General Public version *2.1*", but there was no "version 2.0" of the
"Lesser" library. So assume that version 2.1 is meant here.
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1548252536-6242-4-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
It's either "GNU *Library* General Public version 2" or "GNU Lesser
General Public version *2.1*", but there was no "version 2.0" of the
"Lesser" library. So assume that version 2.1 is meant here.
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1548252536-6242-3-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The current version of the LGPL 2.1 from gnu.org (see the URL
https://www.gnu.org/licenses/old-licenses/lgpl-2.1.txt ) slightly
differs from the old one that we use in our repository. Especially
the recommendation to use "either version 2 of the License, or [...]
any later version" is somewhat misleading, since there was never a
"version 2" of the "Lesser GPL" license - the "version 2" was still
called "Library GPL" instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <1548252536-6242-2-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some files claim that the code is licensed under the GPL, but then
suddenly suggest that the user should have a look at the LGPL.
That's of course non-sense, replace it with the correct GPL wording
instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1548255083-8190-1-git-send-email-thuth@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Sets the category of the sd memory card as DEVICE_CATEGORY_STORAGE.
Devices should be assigned to one of DEVICE_CATEGORY_XXXX.
Signed-off-by: kumar sourav <sourav.jb1988@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190124162045.10474-1-sourav.jb1988@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Sets the category of i8042 device as DEVICE_CATEGORY_INPUT
Devices should be assigned to one of DEVICE_CATEGORY_XXXX.
Signed-off-by: kumar sourav <sourav.jb1988@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20190125151440.13794-1-sourav.jb1988@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
apci_1_compatible should be acpi_1_compatible.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190125094047.22276-1-dgilbert@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Sets the category of edu device as DEVICE_CATEGORY_MISC.
Devices should be assigned to one of DEVICE_CATEGORY_XXXX.
Signed-off-by: kumar sourav <sourav.jb1988@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190124144606.4352-1-sourav.jb1988@gmail.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
qemu_write_full takes care of partial blocking writes,
as in cases of larger file sizes
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20190129131908.27924-4-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
For every MTP_WRITE_BUF_SZ copied, this patch writes it to file before
getting the next block of data. The file is kept opened for the
duration of the operation but the sanity checks on the write operation
are performed only once when the write operation starts. Additionally,
we also update the file size in the object metadata once the file has
completely been written.
Suggested-by: Gerd Hoffman <kraxel@redhat.com>
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20190129131908.27924-3-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a "pre-patch" to breaking up the write buffer for
MTP writes. Instead of allocating a mtp buffer equal to size
sent by the initiator, we start with a small size and reallocate
multiples (of that small size) as needed.
Signed-off-by: Bandan Das <bsd@redhat.com>
Message-id: 20190129131908.27924-2-bsd@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Implement underrun/overrun events of isochronous endpoints
according to XHCI spec (4.10.3.1)
Guest software restarts data streaming when receives these events.
The XHCI reports these events using interrupter assigned
to the slot (as these events do not have TRB), so current
commit adds the field of assigned interrupter to the
XHCISlot structure. Guest software assigns interrupter to the
slot on 'Address Device' and 'Evaluate Context' commands.
Signed-off-by: Yuri Benditovich <yuri.benditovich@janustech.com>
Message-id: 20190128200444.5128-3-yuri.benditovich@janustech.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to the XHCI spec (4.10.2) the controller
never halts isochronous endpoints. This commit prevent
stop of isochronous streaming when sporadic errors
status received from backends.
Signed-off-by: Yuri Benditovich <yuri.benditovich@janustech.com>
Message-id: 20190128200444.5128-2-yuri.benditovich@janustech.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
