volume_name_wchar is allocated by 'void* operator new [](long long unsigned int)
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220512154909.331481-1-kkostiuk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220512154906.331399-1-kkostiuk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After assigning a NVMe/SCSI controller to guest by VFIO, we lose
everything on the host side. A guest uses these devices exclusively,
we usually don't care the actions on these devices. But there is a
low probability that hitting physical hardware warning, we need a
chance to get the basic smart log info.
Introduce disk smart, and implement NVMe smart on linux.
Thanks to Keith and Marc-André.
CC: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220420022610.418052-3-pizhenwei@bytedance.com>
Assigning a NVMe disk by VFIO or emulating a NVMe controller by QEMU,
a NVMe disk get exposed in guest side. Support NVMe disk bus type and
implement posix version.
Test PCI passthrough case:
~#virsh qemu-agent-command buster '{"execute":"guest-get-disks"}' | jq
...
{
"name": "/dev/nvme0n1",
"dependencies": [],
"partition": false,
"address": {
"serial": "SAMSUNG MZQL23T8HCLS-00A07_S64HNE0N500076",
"bus-type": "nvme",
"bus": 0,
"unit": 0,
"pci-controller": {
"bus": 0,
"slot": 22,
"domain": 0,
"function": 0
},
"dev": "/dev/nvme0n1",
"target": 0
}
...
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220420022610.418052-2-pizhenwei@bytedance.com>
On Solaris, instead of the -P, -H, and -r flags, we need to provide
the target init state to the 'shutdown' command: state 5 is poweroff,
0 is halt, and 6 is reboot. We also need to pass -g0 to avoid the
default 60-second delay, and -y to avoid a confirmation prompt.
Implement this logic under an #ifdef CONFIG_SOLARIS, so the
'guest-shutdown' command works properly on Solaris.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220426195526.7699-6-adeason@sinenomine.net>
guest_get_network_stats can silently fail in a couple of ways. Add
debug messages to these cases, so we're never completely silent on
failure.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220426195526.7699-5-adeason@sinenomine.net>
The code for guest-network-get-interfaces needs a couple of small
adjustments for Solaris:
- The results from SIOCGIFHWADDR are documented as being in ifr_addr,
not ifr_hwaddr (ifr_hwaddr doesn't exist on Solaris).
- The implementation of guest_get_network_stats is Linux-specific, so
hide it under #ifdef CONFIG_LINUX. On non-Linux, we just won't
provide network interface stats.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20220426195526.7699-4-adeason@sinenomine.net>
Since its introduction in commit 3424fc9f16 ("qemu-ga: add
guest-network-get-interfaces command"), guest-network-get-interfaces
seems to check if a given interface has a hardware address by checking
'ifa->ifa_flags & SIOCGIFHWADDR'. But ifa_flags is a field for IFF_*
flags (IFF_UP, IFF_LOOPBACK, etc), and comparing it to an ioctl like
SIOCGIFHWADDR doesn't make sense.
On Linux, this isn't a big deal, since SIOCGIFHWADDR has so many bits
set (0x8927), 'ifa->ifa_flags & SIOCGIFHWADDR' will usually have a
nonzero result for any 'normal'-looking interfaces: anything with
IFF_UP (0x1) or IFF_BROADCAST (0x2) set, as well as several
less-common flags. This means we'll try to get the hardware address
for most/all interfaces, even those that don't really have one (like
the loopback device). For those interfaces, Linux just returns a
hardware address of all zeroes.
On Solaris, however, trying to get the hardware address for a loopback
device returns an EADDRNOTAVAIL error. This causes us to return an
error and the entire guest-network-get-interfaces call fails.
Change this logic to always try to get the hardware address for each
interface, and don't return an error if we fail to get it. Instead,
just don't include the 'hardware-address' field in the result if we
can't get the hardware address.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20220426195526.7699-3-adeason@sinenomine.net>
Currently, commands-posix.c assumes that getifaddrs() is only
available on Linux, and so the related guest agent command
guest-network-get-interfaces is only implemented for #ifdef __linux__.
This function does exist on other platforms, though, such as Solaris.
So, add a meson check for getifaddrs(), and move the code for
guest-network-get-interfaces to be built whenever getifaddrs() is
available.
The implementation for guest-network-get-interfaces still has some
Linux-specific code, which is not fixed in this commit. This commit
moves the relevant big chunks of code around without changing them, so
a future commit can change the code in place.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20220426195526.7699-2-adeason@sinenomine.net>
The qemu_*block() functions are meant to be be used with sockets (the
win32 implementation expects SOCKET)
Over time, those functions where used with Win32 SOCKET or
file-descriptors interchangeably. But for portability, they must only be
used with socket-like file-descriptors. FDs can use
g_unix_set_fd_nonblocking() instead.
Rename the functions with "socket" in the name to prevent bad usages.
This is effectively reverting commit f9e8cacc55 ("oslib-posix:
rename socket_set_nonblock() to qemu_set_nonblock()").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The call is POSIX-specific. Use the dedicated GLib API.
(this is a preliminary patch before renaming qemu_set_nonblock())
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The .wxs file uses $(var.Mingw_bin) while configure/meson have always
used Mingw_dlls. Fix them to match what was probably intended.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The old code is kind of wrong. Say it's 1649309843.000001 seconds past
the epoch. Prints "1649309843.1". 9us later, it prints "1649309843.10".
Should really use %06lu for the microseconds part.
Use GDateTime instead, as suggested by Daniel.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since the introduction of guest-exec in/out/err redirections in commit
a1853dca74 ("qga: guest-exec simple stdin/stdout/stderr redirection"),
some execution state variables are handled with atomic ops. However,
there are no threads involved in this code (and glib sources are
dispatched in the same thread), and no other obvious reason to use them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-40-marcandre.lureau@redhat.com>
Simplify the function to only return the directory path. Callers are
adjusted to use the GLib function to build paths, g_build_filename().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-39-marcandre.lureau@redhat.com>
The function is specific to qemu-ga, no need to share it in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220420132624.2439741-32-marcandre.lureau@redhat.com>
The latter simply requires glib.h, while the former is not in the
Windows API (but provided by mingw header & CRT)
Also simplify the expression for 1/10s.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-12-marcandre.lureau@redhat.com>
The header has been part of MinGW-w64 since the introduction of the
project (2007). While on MinGW(32), the legacy project, it was imported
in 2014 from w32api-3.17 (commit e4803e0da2).
According to build-platform.rst and our CI coverage, we only support
building with MinGW-w64 (from Debian/Fedora).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220401085106.2167374-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Environment is implicitly inherited from the current process "environ"
variable for execl() or g_spawn_sync(), no need to be explicit about it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-31-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to GLib API:
g_get_current_time has been deprecated since version 2.62 and should not
be used in newly-written code. GTimeVal is not year-2038-safe. Use
g_get_real_time() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GLib g_get_real_time() is an alternative to gettimeofday() which allows
to simplify our code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220307070401.171986-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes:
qga/vss-win32/install.cpp:49:24: error: cannot initialize a variable of
type 'char *' with an rvalue of type 'const char *'
char *msg = NULL, *nul = strchr(text, '(');
^ ~~~~~~~~~~~~~~~~~
Signed-off-by: Helge Konetzka <hk@zapateado.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <39400817-3dc9-516d-9096-bc1f68862531@zapateado.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
One less qemu-specific macro. It also helps to make some headers/units
only depend on glib, and thus moved in standalone projects eventually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard W.M. Jones <rjones@redhat.com>
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T).
Patch created mechanically with:
$ spatch --in-place --sp-file scripts/coccinelle/use-g_new-etc.cocci \
--macro-file scripts/cocci-macro-file.h FILES...
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20220315144156.1595462-4-armbru@redhat.com>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
The headers are now all available in MinGW master branch.
(commit 13390dbbf885f and earlier) aiming for 10.0.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220222194008.610377-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VssCoordinator & VssAdmin interfaces have been moved to vsadmin.h in
the Windows SDK.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220222194008.610377-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The glib_dynamic detection does not work because the dependency is
overridden in the main meson.build.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Rewritten commit message, added requirement in qga/meson.build - Paolo]
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There are no good reason anymore to keep a pre-built file in the repository.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
C++ presence is checked by the qga/ directory, so it can be assumed
when building VSS module.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The VSS headers are part of standard MS VS SDK, at least since version
15, and probably before that.
They are also included with MinGW, although currently broken.
Let's streamline a bit the options, by not making it so special, and
instead rely on proper system headers configuration or user
--extra-cxxflags. This still requires some extra step to cross-build
with MinGW as described in the meson.build file now.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[Use a "feature"-type option. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop using special paths with outdated headers from an old SDK.
Instead, use standard include paths.
You can still build against the old SDK by running configure with
--extra-cxxflags="-isystem /path/to/inc/win2003/"
(this also allows to build against MinGW headers, which are currently
broken as in 9.0)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
widl from mingw64-tools and wine can compile a TLB file.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Microsoft midl compiler doesn't take "-options" form, nor does it take
OUTPUT filename. The -I option seems needless as well (at least with
VS15).
It's not clear what was actually used when it was introduced in commit
b39297aedf.
strings says "Created by MIDL version 7.00.0555 at Fri Dec 21 13:36:39
2012".
I doubt the makefile rule actually ever worked.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHzwdAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOlMwgApVO6T934TwuTOFBs02Tp8KcjcKQq
5Qf5PrwbsluE8YixJERAFgfxgzbQKL/iHzkP97KoVo3CFFDc1sss7v3mrbbHxbwB
jiYIgbNjRfBbZq7nNmxf2bcXxTpZYvMNEia0QPyNl1GQ0JS/RFOsEYcyVUPvVmAI
djeESRyku1OS5bS5veqE2tL+AWDuodjHeW78qi+yIDRPx3jHLRzuGpQ/3KtgMN6o
d61h5vVrqdxe1HYH/8sh+qU71w7drpNZVYq8PqkZyit/LXgDMyDDOks1XWarrrJE
9xzNBUNR+B6CuHtNw1DGk4rvsCBV/F0ZVki6guVGoqG8njF3l6xyqRHPbw==
=2/gW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into staging
* configure and meson fixes
* "meson test" switch for iotests
* deprecation of old SGX QAPI
* unexport InterruptStatsProviderClass-related functions
# gpg: Signature made Fri 28 Jan 2022 10:13:36 GMT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
configure: fix parameter expansion of --cross-cc-cflags options
qapi: Cleanup SGX related comments and restore @section-size
check-block: replace -makecheck with TAP output
qemu-iotests: require at least an argument to check-block.sh
build: make check-block a meson test
scripts/mtest2make: add support for SPEED=thorough
check-block.sh: passthrough -jN flag of make to -j N flag of check
meson: Use find_program() to resolve the entitlement.sh script
exec/cpu: Make host pages variables / macros 'target agnostic'
meson.build: Use a function from libfdt 1.5.1 for the library check
intc: Unexport InterruptStatsProviderClass-related functions
docker: add msitools to Fedora/mingw cross
build-sys: fix undefined ARCH error
build-sys: fix a meson deprecation warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We don't generate trace events for tests/ and qga/ because that it is
not simple and not necessary. We have corresponding comments in both
tests/meson.build and qga/meson.build.
Still to not miss possible future qapi code generation call, and not to
forget to enable trace events generation, let's enable it by default.
So, turn option --gen-trace into opposite --no-trace-events and use new
option only in tests/ and qga/ where we already have good comments why
we don't generate trace events code.
Note that this commit enables trace-events generation for qapi-gen.py
call from tests/qapi-schema/meson.build and storage-daemon/meson.build.
Still, both are kind of noop: tests/qapi-schema/ doesn't seem to
generate any QMP command code and no .trace-events files anyway,
storage-daemon/ uses common QMP command implementations and just
generate empty .trace-events
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20220126161130.3240892-8-vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Making trace generation work for tests/ and qga/ would involve some
Meson hackery to ensure we generate the trace-events files before
trace-tool uses them. Since we don't actually support tracing there
anyway, we bypass that problem.
Let's add corresponding comments.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20220126161130.3240892-7-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Pasto fixed, commit message punctuation tidied up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
../qga/meson.build:76:4: ERROR: Key ARCH is not in the dictionary.
Fixes commit 823eb013 ("configure, meson: move ARCH to meson.build")
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220114084312.3725242-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Windows 10 and 11 have the same major and minor versions.
So, the only way to determine the correct version is to
use the build number.
After this commit, the guest agent will return the proper
"version" and "version-id" for Windows 11. The "pretty-name"
is read from the registry and will be incorrect until the
MS updates the registry. We only can create some workaround
and replace 10 to 11.
Signed-off-by: Kostiantyn Kostiuk <konstantin@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kostiantyn Kostiuk <kkostiuk@redhat.com>
Windows Server 2016, 2019, 2022 are based on Windows 10 and
have the same major and minor versions. So, the only way to
detect the proper version is to use the build number.
Before this commit, the guest agent use the last build number
for each OS, but it causes problems when new OS releases.
There are few preview versions before release, and we
can't update this list.
After this commit, the guest agent will use the first build
number. For each new preview version or release version,
Microsoft increases the build number, so we can add the number
of the first preview build and this will work until the new
OS release.
Signed-off-by: Kostiantyn Kostiuk <konstantin@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kostiantyn Kostiuk <kkostiuk@redhat.com>
In case when the function fails to get parent device data,
the parent_dev_info variable will be initialized, but not freed.
Signed-off-by: Kostiantyn Kostiuk <konstantin@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Kostiantyn Kostiuk <kkostiuk@redhat.com>
Several QGA definitions omit a blank line after the symbol
declaration. This works OK currently, but it's the only place where we
do this. Adjust it for consistency.
Future commits may wind up enforcing this formatting.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20210930205716.1148693-5-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Macro ERRP_GUARD() is only needed when we want to dereference @errp or
pass it to error_prepend() or error_append_hint(). Delete superfluous
ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210720125408.387910-15-armbru@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Change the 'if' condition strings to be C-agnostic. It will accept
'[A-Z][A-Z0-9_]*' identifiers. This allows to express configuration
conditions in other languages (Rust or Python for ex) or other more
suitable forms.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Message-Id: <20210804083105.97531-11-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Rebased with semantic conflict in redefined-event.json]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If the guest command fails to be spawned, then we would leak the decoded
base64 input used for the command's stdin feed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
libstdc++ is required for the qga-vss.dll that provides fsfreeze
functionality. Currently it is not provided by the MSI installer,
resulting in fsfreeze being disabled in guest environments where it has
not been installed by other means.
In the future this would be better handled via gcc-cpp ComponentGroup
provided by msitools, but that would be better handled with a general
rework of DLL dependency handling in the installer build. Keep it
simple for now to fix this regression.
Tested with Fedora 34 mingw build environment.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Kostiantyn Kostiuk <konstantin@daynix.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The g_regex_match function creates match_info even if it
returns FALSE. So we should always call g_match_info_free.
A better solution is using g_autoptr for match_info variable.
Signed-off-by: Kostiantyn Kostiuk <konstantin@daynix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
In ga_get_win_product_name() a handle to Registry key was open but not
closed.
In this patch the handle is closed as part of the free routine.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1929144
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Basil Salman <bsalman@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
On the current error path of build_guest_fsinfo(), a non existent handle
is passed to CloseHandle().
This patch adds initialization of hLocalDiskHandle to
INVALID_HANDLE_VALUE, and checks for handle validity before the handle
is closed.
Signed-off-by: Basil Salman <basil@daynix.com>
Signed-off-by: Basil Salman <basil@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Commit 54aa3de72 ("qapi: Use QAPI_LIST_PREPEND() where possible")
inadvertently removed the has_dependencies from the partition disk
info, resulting in empty list being returned.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1950833
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20210420125831.233092-1-marcandre.lureau@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Struct members, including command arguments, event data, and union
inline base members, should use '-', not '_'. Enforce this. Fix the
fixable offenders (all in tests/), and add the remainder to pragma
member-name-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-27-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rename pragma returns-whitelist to command-returns-exceptions, and
name-case-whitelist to member-name-case-exceptions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210323094025.3569441-20-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qmp_disable_command() now takes an optional error string to return a
more explicit error message.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1928806
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix up 80+ char line
Signed-off-by: Michael Roth <michael.roth@amd.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: AlexChen <alex.chen@huawei.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix 80+ char violation while we're here
*fix w32 build breakage from changing INVALID_SET_FILE_POINTER
definition from a cast to a subtraction
Signed-off-by: Michael Roth <michael.roth@amd.com>
The current GLib version implements the DllMain function. DllMain is also
present in the provider.cpp code. So in the case of static linking, the
DllMain redefinition error occurs. For now, just switch to dynamic linking
and revert this patch when the issue will be solved.
See Glib issue for more details https://gitlab.gnome.org/GNOME/glib/-/issues/692
Signed-off-by: Kostiantyn Kostiuk <konstantin@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I found another spot that can benefit from using our macros instead of
open-coding qapi list creation.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20210205171634.1491258-1-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
These cases require a bit more thought to review; in each case, the
code was appending to a list, but not with a FOOList **tail variable.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210113221013.390592-6-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Flawed change to qmp_guest_network_get_interfaces() dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
The easiest spots to use QAPI_LIST_APPEND are where we already have an
obvious pointer to the tail of a list. While at it, consistently use
the variable name 'tail' for that purpose.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210113221013.390592-5-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
-----BEGIN PGP SIGNATURE-----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=X/jY
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20201222' into staging
Further s390x updates:
- enhance the s390 devices acceptance test
- tcg: improve carry computation
- qga: send the ccw address with the fsinfo data
- fixes for protected virtualisation and zpci
# gpg: Signature made Tue 22 Dec 2020 10:37:34 GMT
# gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF
# gpg: issuer "cohuck@redhat.com"
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown]
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full]
# gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown]
# gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown]
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck-gitlab/tags/s390x-20201222:
tests/acceptance: Add a test with the Fedora 31 kernel and initrd
s390x/pci: Fix memory_region_access_valid call
s390x/pci: fix pcistb length
tests/acceptance: Test the virtio-balloon device on s390x
tests/acceptance: Test virtio-rng on s390 via /dev/hwrng
tests/acceptance: Extract the code to clear dmesg and wait for CRW reports
tests/acceptance: test hot(un)plug of ccw devices
target/s390x: Improve SUB LOGICAL WITH BORROW
target/s390x: Improve cc computation for SUBTRACT LOGICAL
target/s390x: Improve ADD LOGICAL WITH CARRY
target/s390x: Improve cc computation for ADD LOGICAL
qga/commands-posix: Send CCW address on s390x with the fsinfo data
MAINTAINERS: move my git tree to gitlab
s390x: pv: Fence additional unavailable SCLP facilities for PV guests
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We need the CCW address on the libvirt side to correctly identify
the disk, so add this information to the GuestDiskAddress on s390x.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Message-Id: <20201127082353.448251-1-thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
qobject_to_json() and qobject_to_json_pretty() build a GString, then
covert it to QString. Just one of the callers actually needs a
QString: qemu_rbd_parse_filename(). A few others need a string they
can modify: qmp_send_response(), qga's send_response(), to_json_str(),
and qmp_fd_vsend_fds(). The remainder just need a string.
Change qobject_to_json() and qobject_to_json_pretty() to return the
GString.
qemu_rbd_parse_filename() now has to convert to QString. All others
save a QString temporary. to_json_str() actually becomes a bit
simpler, because GString provides more convenient modification
functions.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201211171152.146877-6-armbru@redhat.com>
Anywhere we create a list of just one item or by prepending items
(typically because order doesn't matter), we can use
QAPI_LIST_PREPEND(). But places where we must keep the list in order
by appending remain open-coded until later patches.
Note that as a side effect, this also performs a cleanup of two minor
issues in qga/commands-posix.c: the old code was performing
new = g_malloc0(sizeof(*ret));
which 1) is confusing because you have to verify whether 'new' and
'ret' are variables with the same type, and 2) would conflict with C++
compilation (not an actual problem for this file, but makes
copy-and-paste harder).
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20201113011340.463563-5-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
[Straightforward conflicts due to commit a8aa94b5f8 "qga: update
schema for guest-get-disks 'dependents' field" and commit a10b453a52
"target/mips: Move mips_cpu_add_definition() from helper.c to cpu.c"
resolved. Commit message tweaked.]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Change
Parameter 'mode' expects halt|powerdown|reboot
to
Parameter 'mode' expects 'halt', 'powerdown', or 'reboot'
for consistency with similar error messages elsewhere.
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-9-armbru@redhat.com>
check_suspend_mode()'s error message
Parameter 'mode' expects GuestSuspendMode
makes no sense to users: GuestSuspendMode is a C enum. Fortunately,
it is unreachable. Replace it by abort().
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20201113082626.2725812-8-armbru@redhat.com>
The QGA MSI target requires several macros which are only available
without --disable-guest-agent-msi.
Don't define that target if configure was called with --disable-guest-agent-msi.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-Id: <20201117201834.408892-1-sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recently-added 'guest-get-disk' command returns a list of
GuestDiskInfo entries, which in turn have a 'dependents' field which
lists devices these entries are dependent upon. Thus, 'dependencies'
is a better name for this field. Address this by renaming the field
accordingly.
Additionally, 'dependents' is specified as non-optional, even though
it's not implemented for w32. This is misleading, since it gives users
the impression that a particular disk might not have dependencies,
when in reality that information is simply not known to the guest
agent. Address this by making 'dependents' an optional field, and only
marking it as in-use when the facilities to obtain this information are
available to the guest agent.
Cc: Eric Blake <eblake@redhat.com>
Cc: Tomáš Golembiovský <tgolembi@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
We opendir("/sys/block") at the beginning of the function, but we never
close it prior to returning.
Fixes: Coverity CID 1436130
Fixes: fed3956429 ("qga: add implementation of guest-get-disks for Linux")
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix-up merge conflicts due to qga-ssh-test being disabled in earlier
patch due to G_TEST_OPTION_ISOLATE_DIRS triggering build-oss-fuzz
leak detector.
*fix up style and disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
I prefer 'reset' over 'clear', since 'clear' and keys may have some
other relations or meaning.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*fix disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
Add new commands to add and remove SSH public keys from
~/.ssh/authorized_keys.
I took a different approach for testing, including the unit tests right
with the code. I wanted to overwrite the function to get the user
details, I couldn't easily do that over QMP. Furthermore, I prefer
having unit tests very close to the code, and unit files that are domain
specific (commands-posix is too crowded already). FWIW, that
coding/testing style is Rust-style (where tests can or should even be
part of the documentation!).
Fixes:
https://bugzilla.redhat.com/show_bug.cgi?id=1885332
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
*squashed in fix-ups for setting file ownership and use of QAPI
conditionals for CONFIG_POSIX instead of stub definitions
*disable qga-ssh-test for now due to G_TEST_OPTION_ISOLATE_DIRS
triggering leak detector in build-oss-fuzz
*fix disallowed g_assert* usage reported by checkpatch
Signed-off-by: Michael Roth <michael.roth@amd.com>
The command lists all the physical disk drives. Unlike for Linux
partitions and virtual volumes are not listed.
Example output:
{
"return": [
{
"name": "\\\\.\\PhysicalDrive0",
"partition": false,
"address": {
"serial": "QM00001",
"bus-type": "sata",
...
},
"dependents": []
}
]
}
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The command lists all disks (real and virtual) as well as disk
partitions. For each disk the list of dependent disks is also listed and
/dev path is used as a handle so it can be matched with "name" field of
other returned disk entries. For disk partitions the "dependents" list
is populated with the the parent device for easier tracking of
hierarchy.
Example output:
{
"return": [
...
{
"name": "/dev/dm-0",
"partition": false,
"dependents": [
"/dev/sda2"
],
"alias": "luks-7062202e-5b9b-433e-81e8-6628c40da9f7"
},
{
"name": "/dev/sda2",
"partition": true,
"dependents": [
"/dev/sda"
]
},
{
"name": "/dev/sda",
"partition": false,
"address": {
"serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493",
"bus-type": "sata",
...
"dev": "/dev/sda",
"target": 0
},
"dependents": []
},
...
]
}
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
*add missing stub for !defined(CONFIG_FSFREEZE)
*remove unused deps_dir variable
Signed-off-by: Michael Roth <michael.roth@amd.com>
Add API and stubs for new guest-get-disks command.
The command guest-get-fsinfo can be used to list information about disks
and partitions but it is limited only to mounted disks with filesystem.
This new command should allow listing information about disks of the VM
regardles whether they are mounted or not. This can be usefull for
management applications for mapping virtualized devices or pass-through
devices to device names in the guest OS.
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Simple unions are simpler than flat unions in the schema, but more
complicated in C and on the QMP wire: there's extra indirection in C
and extra nesting on the wire, both pointless. They should be avoided
in new code.
GuestDeviceId was recently added for guest-get-devices. Convert it to
a flat union.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call.
qmp_guest_get_devices() is wrong that way: it calls error_setg() in a
loop.
If no iteration fails, the function returns a value and sets no error.
Okay.
If exactly one iteration fails, the function returns a value and sets
an error. Wrong.
If multiple iterations fail, the function trips error_setv()'s
assertion.
Fix it to return immediately on error.
Perhaps the failure to convert the driver version to UTF-8 should not
be an error. We could simply not report the botched version string
instead.
Drop a superfluous continue while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
guest-get-devices returns 'driver-date' as string in the format
YYYY-MM-DD. Goes back to recent commit 2e4211cee4 "qga: add command
guest-get-devices for reporting VirtIO devices".
We should avoid use of multiple encodings for the same kind of data.
Especially string encodings. Change it to return nanoseconds since
the epoch, like guest-get-time does.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Member 'address' is union GuestDeviceAddress with a single branch
GuestDeviceAddressPCI, containing PCI vendor ID and device ID. This
is not a PCI address. Type GuestPCIAddress is. Messed up in recent
commit 2e4211cee4 "qga: add command guest-get-devices for reporting
VirtIO devices".
Rename type GuestDeviceAddressPCI to GuestDeviceIdPCI, type
GuestDeviceAddress to GuestDeviceId, and member 'address' to 'id'.
Document the member properly while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
The correct way to set the current monitor for a coroutine handler will
be different than for a blocking handler, so monitor_set_cur() needs to
be called in qmp_dispatch().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20201005155855.256490-7-kwolf@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>