For each target, only define the bits that appear in
arch/target/include/asm/fcntl.h. Mirror the kernel's
asm-generic layout by handling anything undefined afterward.
Signed-off-by: Richard Henderson <rth@twiddle.net>
We weren't aggregating the exceptions, nor raising signals properly.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Proper signal numbers were not defined, and EXCP_INTERRUPT
was unhandled, leading to all sorts of subtle confusion.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Commit 0f66998 makes -enable-fips conditional on Linux hosts but then uses it
unconditionally in vl.c.
Fix this by moving the fips handling to os-posix.c and adding a condition.
Cc: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/scsi-next:
scsi: add support for ATA_PASSTHROUGH_xx scsi command
esp: add missing const on TypeInfo structures
esp: enable for all PCI machines
Revert "megasas: disable due to build breakage"
megasas: static SAS addresses
scsi-disk: fix compilation with DEBUG_SCSI
megasas: Update function megasys_scsi_uninit
SCSI: STARTSTOPUNIT only eject/load media if powercondition is 0
SCSI: Update the sense code for PREVENT REMOVAL errors
Correct the command names of opcode 0x85 and 0xa1, and calculate
their xfer size from CDB.
Signed-off-by: Cong Meng <mc@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
FIPS 140-2 requires disabling certain ciphers, including DES, which is used
by VNC to obscure passwords when they are sent over the network. The
solution for FIPS users is to disable the use of VNC password auth when the
host system is operating in FIPS compliance mode and the user has specified
'-enable-fips' on the QEMU command line.
This patch causes QEMU to emit a message to stderr when the host system is
running in FIPS mode and a VNC password was specified on the commend line.
If the system is not running in FIPS mode, or is running in FIPS mode but
VNC password authentication was not requested, QEMU operates normally.
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qmp/queue/qmp:
hmp: show the backing file depth
block: Use bdrv_get_backing_file_depth()
block: create bdrv_get_backing_file_depth()
qapi: qapi.py: allow the "'" character to be escaped
* afaerber-or/qom-cpu-4:
cpu: Move thread_kicked to CPUState
cpu: Move thread field into CPUState
cpu: Move CPU_COMMON_THREAD into CPUState
qemu-thread: Let qemu_thread_is_self() return bool
* stefanha/net:
net: add the support for -netdev socket, listen
net: fix the coding style
hub: add the support for hub own flow control
net: determine if packets can be sent before net queue deliver packets
net: cleanup deliver/deliver_iov func pointers
net: Make "info network" output more readable info
net: Rename qemu_del_vlan_client() to qemu_del_net_client()
net: Rename vc local variables to nc
net: Rename VLANClientState to NetClientState
net: Rename non_vlan_clients to net_clients
net: Remove VLANState
net: Remove vlan code from net.c
net: Convert qdev_prop_vlan to peer with hub
net: Drop vlan argument to qemu_new_net_client()
hub: Check that hubs are configured correctly
net: Look up 'vlan' net clients using hubs
net: Use hubs for the vlan feature
net: Add a hub net client
net: Add interface to bridge when SIOCBRADDIF isn't available
* stefanha/trivial-patches:
exec.c: Remove out of date comment
exec.c: Use subpages for large unaligned mappings
exec.c: Fix off-by-one error in register_subpage
socket: clean up redundant assignment
qom: Clean libuser object and dependency files
usb: Clean common object and dependency files
Remove an out of date comment: this comment used to be attached to
cpu_register_physical_memory_log(), before commit 0f0cb164 accidentally
inserted a couple of other functions between the comment and its function.
It is in any case obsolete since (a) the function arguments it refers
to have been replaced with a single MemoryRegionSection* argument and
(b) the inability to handle regions whose offset_within_address_space
and offset_within_region aren't equally aligned was fixed as part of
the rewrite of this code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Registering a multi-page memory region that is non-page-aligned results
in a subpage from the start to the page boundary, some number of full
pages, and possibly another subpage from the last page boundary to the
end. The full pages will have a value for offset_within_region that is
not a multiple of TARGET_PAGE_SIZE. Accesses through softmmu are unable
to handle this and will segfault.
Handling full pages through subpages is not optimal, but only
non-page-aligned mappings take the penalty.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
subpage_register() expects "end" to be the last byte in the mapping.
Registering a non-page-aligned memory region that extends up to or
beyond a page boundary causes subpage_register() to silently fail
through the (end >= PAGE_SIZE) check.
This bug does not cause noticeable problems for mappings that do not
extend to a page boundary, though they do register an extra byte.
Signed-off-by: Tyler Hall <tylerwhall@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Use the dedicated counting function in qmp_query_block in order to
propagate the backing file depth to HMP and add backing_file_depth
to qmp-commands.hx
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Create bdrv_get_backing_file_depth() in order to be able to show
in QMP and HMP how many ancestors backing an image a block device
have.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This patch introduces a new property 'sas_address' which
allows the user to specify the SAS address for the HBA.
The default address is following the NAA locally assigned
identifier format with the locally assigned address
0x525400 as used eg for the MAC addresses.
The lower bytes are set to the pci address which
will ensure uniqueness for the local machine.
The port addresses are now calculated based on the magic
number 0x1221 (which is found in real hardware, too) plus
the device number.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Andreas Faerber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit f90c2bcdbc changed
PCIUnregisterFunc, therefore the function prototype
needs an update.
megasas.o is currently not linked, so this bug was not
detected by the buildbots.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The START STOP UNIT command will only eject/load media if
power condition is zero.
If power condition is !0 then LOEJ and START will be ignored.
From MMC (sbc contains similar wordings too)
The Power Conditions field requests the block device to be placed
in the power condition defined in
Table 558. If this field has a value other than 0h then the Start
and LoEj bits shall be ignored.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change the sense codes for failures to eject a device that is locked
by PREVENT_ALLOW_MEDIUM_REMOVAL from
the generic MEDIA_LOAD_OR_EJECT_FAILED to the more specific
MEDIUM_REMOVAL_PREVENTED.
The second sense code is more accurate, and is also listed in MMC annex F
for the recommended sense codes for MMC devices while the first sense code is not.
Signed-off-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For command line options which permit '?' meaning 'please list the
permitted values', add support for 'help' as a synonym, by abstracting
the check out into a helper function.
This change means that in some cases where we were being lazy in
our string parsing, "?junk" will now be rejected as an invalid option
rather than being (undocumentedly) treated the same way as "?".
Update the documentation to use 'help' rather than '?', since '?'
is a shell metacharacter and thus prone to fail confusingly if there
is a single character filename in the current working directory and
the '?' has not been escaped. It's therefore better to steer users
towards 'help', though '?' is retained for backwards compatibility.
We do not, however, update the output of the system emulator's -help
(or any documentation autogenerated from the qemu-options.hx which
is the source of the -help text) because libvirt parses our -help
output and will break. At a later date when QEMU provides a better
interface so libvirt can avoid having to do this, we can update the
-help text too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
CPU_COMMON_THREAD was only used for Windows, adding an hThread field
to CPU_COMMON.
Move the field into QOM CPUState and change its type to HANDLE,
which it is assigned from. This requires Windows headers, pulled in
through qemu-thread.h.
Signed-off-by: Andreas Färber <afaerber@suse.de>
qemu_cpu_is_self(), passing the return value through, will later be
adapted to return bool as well.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Support escaping the escape character, and make more robust (don't die
for '', handle ' without matching '.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
glibc 2.16 will remove the undocumented definition of 'struct siginfo'
from <bits/siginfo.h>.
This change is already present in glibc 2.15.90, so qemu compilation
of certain targets (eg. cris-user) breaks.
This struct was always typedef'd to be the same as 'siginfo_t' which
is what POSIX documents, so use that instead.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Moving reset callback into cpu object from board level and
resetting cpu at the end of x86_cpu_realize() will allow properly
create cpu object during run-time (hotplug) without calling reset externaly.
When reset over QOM hierarchy is implemented, reset callback
should be removed.
v2:
- leave cpu_reset in pc_new_cpu() for now, it's to be cleaned up when APIC
init is moved in cpu.c
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
MP initialization protocol differs between cpu families, and for P6 and
onward models it is up to CPU to decide if it will be BSP using this
protocol, so try to model this. However there is no point in implementing
MP initialization protocol in qemu. Thus first CPU is always marked as BSP.
This patch:
- moves decision to designate BSP from board into cpu, making cpu
self-sufficient in this regard. Later it will allow to cleanup hw/pc.c
and remove cpu_reset and wrappers from there.
- stores flag that CPU is BSP in IA32_APIC_BASE to model behavior
described in Inted SDM vol 3a part 1 chapter 8.4.1
- uses MSR_IA32_APICBASE_BSP flag in apic_base for checking if cpu is BSP
patch is based on Jan Kiszka's proposal:
http://thread.gmane.org/gmane.comp.emulators.qemu/100806
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
xen_pt_unregister_device is used as PCIUnregisterFunc, so it should
match the type.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Andreas Färber <afaerber@suse.de>
xen_pt_unregister_device is used as PCIUnregisterFunc, so it should
match the type.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The xs.h header is now deprecated and produces a warning. This prevents the
configure script from enabling Xen with xen-unstable whom will become 4.2. As
this header is not anymore common to every version of Xen, we just remove it
from the early probe for Xen.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The -net socket,listen option does not work with the newer -netdev
syntax:
http://lists.gnu.org/archive/html/qemu-devel/2011-11/msg01508.html
This patch makes it work now.
For the case where one vlan has multiple listenning sockets,
the patch will also provide the support.
Supported syntax:
1.) -net socket,listen=127.0.0.1:1234,vlan=0
2.) -net socket,listen=127.0.0.1:1234,vlan=0 -net socket,listen=127.0.0.1:1235,vlan=0
3.) -netdev socket,listen=127.0.0.1:1234,id=socket0
Drop the NetSocketListenState struct and add a listen_fd field
to NetSocketState. When a -netdev socket,listen= instance is created
there will be a NetSocketState with fd=-1 and a valid listen_fd. The
net_socket_accept() handler waits for listen_fd to become readable and
then accepts the connection. When this state transition happens, we no
longer monitor listen_fd for incoming connections...until the client
disconnects again.
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Only when all other hub port's *peer* .can_receive() all return 1,
the source hub port .can_receive() return 1.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
