Commit 1c380f9460 breaks live migration.
DMA stops working for ehci (and probably for any pci device) after
restoring the guest because the bus master region never gets enabled.
Add code doing that after loading the pci config space from vmstate.
Cc: Avi Kivity <avi@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While reading microMIPS decoding, I found a possible wrong opcode
encoding. According to [1] page 166, the bits 13..12 for MULTU is
0x01 rather than 0x00. Please review, thanks.
[1] MIPS Architecture for Programmers VolumeIV-e: The MIPS DSP
Application-Specific Extension to the microMIPS32 Architecture
Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
According to the MIPS Malta Developement Platform User's Manual, the
i8259 interrupt controller is supposed to be connected to the hardware
IRQ0, and the CBUS UART to the hardware interrupt 2.
In QEMU they are both connected to hardware interrupt 0, the CBUS UART
interrupt being wrong. This patch fixes that. It should be noted that
the irq array in QEMU includes the software interrupts, hence
env->irq[2] is the first hardware interrupt.
Cc: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* kraxel/pixman.v5:
pixman: cleanup properly on make distclean
pixman: add licensing info
pixman: build internal version early
pixman: pass cflags, add -fPIC
pixman: disable gtk
pixman: set --host for cross builds
pixman: add output dir to include path
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/nbd-next:
nbd: fixes to read-only handling
hmp: add NBD server commands
nbd: disallow nbd-server-add before nbd-server-start
nbd: force read-only export for read-only devices
nbd: fix nbd_server_stop crash when no server was running
nbd: accept URIs
nbd: accept relative path to Unix socket
qemu-nbd: initialize main loop before block layer
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/scsi-next:
virtio-scsi: use dma_context_memory
dma: Define dma_context_memory and use in sysbus-ohci
megasas: Correct target/lun mapping
scsi-disk: flush cache after disabling it
megasas: do not include block_int.h
scsi: remove superfluous call to scsi_device_set_ua
virtio-scsi: factor checks for VIRTIO_SCSI_S_DRIVER_OK when reporting events
scsi: do not return short responses for emulated commands
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* kraxel/usb.70:
ehci: fix migration
xhci: Fix some DMA host endian bugs
usb/combined-packet: Move freeing of combined to usb_combined_packet_remove()
xhci: Add support for packets with both data and an error status
ehci: Add support for packets with both data and an error status
ehci: Get rid of the magical PROC_ERR status
usb-redir: Allow packets to have both data and an error-status
usb: split packet result into actual_length + status
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Pass on CFLAGS to the pixman configure script.
Add -fPIC to the cflags, needed to make the final link succeed.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set --host when calling pixman configure while doing cross builds so
pixman's autoconf picks up the cross build tools correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This makes use of the new level irqfd support enabling bypass of qemu
userspace both on INTx injection and unmask. This significantly
boosts the performance of devices making use of legacy interrupts (ex.
~60% better netperf TCP_RR scores for an e1000e assigned to a Linux
guest and booted with pci=nomsi). This also avoids flipping mmaps on
and off to simulate EOIs, so greatly improves performance of device
access in addition to interrupt latency.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
We do not need BLKROSET if the kernel supports setting flags.
Also, always do BLKROSET even for a read-write export, otherwise
the read-only state remains "sticky" after the invocation of
"qemu-nbd -r".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit ed2aec4867f0d5f5de496bb765347b5d0cfe113d changed the return
value of aio_ctx_prepare from false to true when only idle bottom
halves are available. This broke PC old-style DMA, which uses them.
Fix this by making aio_ctx_prepare return true only when non-idle
bottom halves are scheduled to run.
Reported-by: malc <av1474@comtv.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
Until address_space_rw was introduced, NULL was accepted as a
placeholder for DMA with no IOMMU (to address_space_memory).
This does not work anymore, and dma_context_memory needs to
be specified explicitly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define a new global dma_context_memory which is a DMAContext corresponding
to the global address_space_memory AddressSpace. This can be used by
sysbus peripherals like sysbus-ohci which need to do DMA.
In particular, use it in the sysbus-ohci device, which fixes a
segfault when attempting to use that device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
The structure to reference a logical drive has an unused field,
which can be used to carry the lun ID. This enabled seabios to
establish the proper target/LUN mapping.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SBC says that "if an application client changes the WCE bit from one to
zero via a MODE SELECT command, then the device server shall write
any data in volatile cache to non-volatile medium before completing
the command".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The inquiry command, for the case of VPD=1, was returning short
responses; the number of returned bytes was just the number of bytes
in the request, without padding to the specified allocation length
with zero bytes. This is usually harmless, but it is a violation
of the SCSI specification.
To fix this, always pad with zero bytes to r->cmd.xfer in
scsi_disk_emulate_command, and return at most r->buflen bytes
(the size of the buffer for command data) rather than at most
buflen bytes (the number of bytes that was filled in).
Before this patch, "strace sg_inq -p0x83 /dev/sda" would report a
non-zero resid value. After this patch, it reports resid=0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It works nicely with the QMP commands, but it adds useless complication
with HMP. In particular, see the following:
(qemu) nbd_server_add -w scsi0-hd0
(qemu) nbd_server_start -a localhost:10809
NBD server already exporting device scsi0-hd0
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This failed on the new assertion of qemu_set_fd_handler2:
qemu-system-x86_64: /home/pbonzini/work/upstream/qemu/iohandler.c:60: qemu_set_fd_handler2: Assertion `fd >= 0' failed.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The URI syntax is consistent with the Gluster syntax. Export names
are specified in the path, preceded by one or more (otherwise unused)
slashes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The call to gen_logic_imm for OPC_LUI passes -1 for rs. This
causes the MIPS_DEBUG statement to seg fault due to the deference
of regnames[rs]. This patch fixes that.
Signed-off-by: Eric Johnson <ericj@mips.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
(aurel32: replaced static string formating by a static string)
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Pass around CPUArchState instead of using global cpu_single_env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Acked-by: Richard Henderson <rth@twiddle.net>
Acked-by: Aurelien Jarno <aurelien@aurel32.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
This is setting the stage for a cleanup of FPREM and FPREM1 helpers while being
sure that they behave same as bare metal.
The test constructs operands using combinations of corner cases for the
floating-point bitfields and prints operands, result and FPU status word for
FPREM and FPREM1. The outputs can then be compared between bare metal and QEMU.
The 'run-test-i386-fprem' make target does just that.
Signed-off-by: Catalin Patulea <catalinp@google.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Cirrus is triggering this, e.g. during Win2k boot: Changes only on
disabled regions require no topology update when transaction depth drops
to 0 again.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
A compiler warning is caused by the unused local function reinit_timers
on non-POSIX hosts. Include that function only for POSIX hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
