This makes sure reads are confined to vga video memory.
v3: use uint32_t, fix cut+paste bug.
v2: fix ati_cursor_draw_line too.
Reported-by: xu hang <flier_m@outlook.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190917111441.27405-3-kraxel@redhat.com
The MacOS driver exits if the card does not have an interrupt. If we
set PCI_INTERRUPT_PIN to 1 then it enables VBlank interrupts and it
boots but the mouse pointer cannot be moved. This patch implements a
dummy VBlank interrupt triggered by a 60 Hz timer. With this the
pointer now moves but MacOS still hangs somewhere before completely
finishing boot.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <89364275f2fb5f85ee73c0e76528aa91691a499a.1565907489.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set frame buffer endianness according to requested endianness for
frame buffer apertures. We set frame buffer to big endian if any of
the two apertures are set to big endian. Using different endianness
for the two apertures is not implemented. This fixes inverted colors
with MacOS and Xorg frame buffer driver but some Linux drivers may
have endianness issues even on real hardware so this may not fix all
cases. MorphOS uses aper0 in LE, Linux uses aper0 in BE and MacOS uses
aper1 in BE but not sure about others or if MacOS also may need aper0
in which case we'll need a more complex fix but MacOS has other
problems yet so for now this might work.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e2a7ec7af3fc30523213bcd27832ccad34323f2c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MacOS uses non-0 offset so it needs this and the resulting
vbe_start_addr seems correct but picture is still broken with OpenBIOS
after FCode runs but that maybe due to firmware problems now. After
boot, picture is now correct.
It also occured to me that these CRTC regs are also present in VGA so
I wonder if they should be shared in case some drivers try to poke
them via VGA regs or these are a separate set of regs for extended
mode. Added a comment noting this but drivers I've tried so far
program the card accessing ati regs so I did not attempt to change it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 1c6fce457ef7e6f889e38dc0423791be92310a62.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The crtc_offset is not needed, cur_offset is relative to the start of
vram not the start of displayed area. This fixes broken pointer image
with MacOS that uses non-0 crtc_offset.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e6acb1fa3ca980dc948045443e5986e2aa79bf7c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also update bitbang_i2c state when output bits are changed while
enable bits are set. This fixes EDID access by the ATI FCode ROM.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 292e70a92b7fbfd9a4120d433dbdcfda4e5f6c3c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some drivers (e.g. Linux radeon drm and MacOS) access these to find
apertures to access card. Try to implement these but not sure these
are correct yet.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: b2df13655feecd63c0049ec45fd87d1026f67091.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Turns out my last fix to this broke one case for Rage 128 Pro so
revert that part of previous patch. This now fixes the remaining
rendering problems for MorphOS which now can produce picture with
-device ati-vga (although it may not be optimised yet and video
overlay emulation is still known to be missing).
Fixes: 866ad5f5ff
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: da33261a841755691f698db8190c868df0c0d3ae.1562276605.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The extended mode frame buffer should be little endian even when
emulating big endian machine (such as PPC). This fixes color problems
with MorphOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 439aa85061f103446df7b42632d730971a372432.1562151410.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the bitbang_i2c_init() function allocates a
bitbang_i2c_interface struct which it returns. This is unfortunate
because it means that if the function is used from a DeviceState
init method then the memory will be leaked by an "init then delete"
cycle, as used by the qmp/hmp commands that list device properties.
Since three out of four of the uses of this function are in
device init methods, switch the function to do an in-place
initialization of a struct that can be embedded in the
device state struct of the caller.
This fixes LeakSanitizer leak warnings that have appeared in the
patchew configuration (which only tries to run the sanitizers
for the x86_64-softmmu target) now that we use the bitbang-i2c
code in an x86-64 config.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702163844.20458-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix bit masks of registers for offset and pitch and also handle
default values for both R128P and RV100. This improves picture a bit
but does not resolve all problems yet so there might be some more bugs
somewhere.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190624100005.7A1CA746395@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds DDC support to ati-vga and connects i2c-ddc to it. This
allows at least MacOS with an ATI ndrv, Linux radeonfb and MorphOS to
get monitor EDID info (although MorphOS splash screen is not displayed
and radeonfb needs additional tables from vgabios-rv100). Xorg needs
additional support from VESA vgabios, it's missing INT10 0x4F15
function (see
https://gitlab.freedesktop.org/xorg/xserver/blob/master/hw/xfree86/vbe/vbe.c)
without which no DDC is available that also prevents loading the
accelerated X driver.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 046ddebb7ec8db48c4e877ee444ec1c41e385a74.1561028123.git.balaton@eik.bme.hu
ati-vga: Clarify comment
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190620195213.C54127461AE@zero.eik.bme.hu
ati-vga: Add DDC reg names for debug
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190621181459.2F8207462AA@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes, with the changes
to the following files manually reverted:
contrib/libvhost-user/libvhost-user-glib.h
contrib/libvhost-user/libvhost-user.c
contrib/libvhost-user/libvhost-user.h
linux-user/mips64/cpu_loop.c
linux-user/mips64/signal.c
linux-user/sparc64/cpu_loop.c
linux-user/sparc64/signal.c
linux-user/x86_64/cpu_loop.c
linux-user/x86_64/signal.c
slirp/src/*
target/s390x/gen-features.c
tests/fp/platform.h
tests/migration/s390x/a-b-bios.c
tests/test-rcu-simpleq.c
tests/test-rcu-tailq.c
tests/uefi-test-tools/UefiTestToolsPkg/BiosTablesTest/BiosTablesTest.c
We're in the process of spinning out slirp/. tests/fp/platform.h is
has to include qemu/osdep.h because tests/fp/berkeley-softfloat-3/ and
tests/fp/berkeley-testfloat-3/ don't. tests/uefi-test-tools/ is guest
software. The remaining reverts are the same as in commit
b7d89466dd.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190313162812.8885-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Revert change to tests/fp/platform.h, adjust commit message]
Coverity (CID 1399700) found that this was wrong so instead of trying
to do it by hand use existing access functions that should work better.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190318223842.427CB7456B2@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
At least two machines, the PPC mac99 and MIPS fulong2e, have an ATI
gfx chip by default (Rage 128 Pro and M6/RV100 respectively) and
guests running on these and the PMON2000 firmware of the fulong2e
expect this to be available. Fortunately these are very similar chips
so they can be mostly emulated in the same device model. This patch
adds basic emulation of these ATI VGA chips.
While this is incomplete and currently only enough to run the MIPS
firmware and get framebuffer output with Linux, it allows the fulong2e
board to work more like the real hardware and having it in QEMU in
this state provides a way to experiment with it and allows others to
contribute to improve it. It is compiled for all archs but only the
fulong2e (which currently has no display output at all) is set to use
it by default (in a separate patch).
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com>
Tested-by: Howard Spoelstra <hsp.cat7@gmail.com>
Message-id: 0b1b7c22873a6e37627261b04fb687412b25ff4f.1552152100.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
