Resolves redundant code in the piix and q35 machines.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The attribute isn't user-changeable and only true for pc-based machines. Turn it
into a class attribute which allows for inlining pc_guest_info_init() into
pc_machine_initfn().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In the i386 PC machine, we want to run the pc_cmos_init_late()
function only once the IDE and floppy drive devices have been set up.
We currently do this using qemu_register_reset(), and then have the
function call qemu_unregister_reset() on itself, so it runs exactly
once.
This was an expedient way to do it back in 2010 when we first added
this (in commit c0897e0cb9), but now we have a more obvious point
to do "machine initialization that has to happen after generic device
init": the machine-init-done hook.
Do the pc_cmos_init_late() work from our existing PC machine init
done hook function, so we can drop the use of qemu_register_reset()
and qemu_unregister_reset().
Because the pointers to the devices we need (the IDE buses and the
RTC) are now all in the machine state, we don't need the
pc_cmos_init_late_arg struct and can just pass the PCMachineState
pointer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240220160622.114437-3-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Add the two IDE bus BusState pointers to the set we keep in PCMachineState.
This allows us to avoid passing them to pc_cmos_init(), and also will
allow a refactoring of how we call pc_cmos_init_late().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMD: Do not zero-init pcms->idebus[] again]
Message-ID: <20240220160622.114437-2-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Both invocations are the same and either one is always executed. Avoid this
redundancy.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240208220349.4948-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The current logging doesn't tell us which specific smbus device is an
error state.
Signed-off-by: Joe Komlodi <komlodi@google.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240202204847.2062798-3-komlodi@google.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Prefer QDev API for QDev objects, avoid the underlying QOM layer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20240216110313.17039-6-philmd@linaro.org>
Prefer QDev API for QDev objects, avoid the underlying QOM layer.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-Id: <20240216110313.17039-4-philmd@linaro.org>
ppc440_pcix.c is moved from the target specific ppc_ss[] meson
source set to pci_ss[] which is common to all targets: the
object is built once.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240215105017.57748-5-philmd@linaro.org>
ppc4xx_pci.c is moved from the target specific ppc_ss[] meson
source set to pci_ss[] which is common to all targets: the
object is built once.
Declare PPC4XX_PCI selector in pci-host/Kconfig.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20240215105017.57748-4-philmd@linaro.org>
sysbus_add_io(...) is a simple wrapper to
memory_region_add_subregion(get_system_io(), ...).
It is used in 3 places; inline it directly.
Rationale: we want to move to an explicit I/O bus,
rather that an implicit one. Besides in heterogeneous
setup we can have more than one I/O bus.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20240216150441.45681-1-philmd@linaro.org>
[PMD: Include missing "exec/address-spaces.h" header]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Since the named GPIO lines are a "public" interface to the device,
we can directly call qdev_connect_gpio_out_named(), making it
consistent with how the other A20 input source (port92) is wired.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Yanan Wang <wangyanan55@huawei.com>
Message-Id: <20211218130437.1516929-6-f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
It ensures dbus-display1.c will not be recompiled.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240214-dbus-v7-3-7eff29f04c34@daynix.com>
Explicitly specify dbus-display1.h as a dependency so that files
depending on it will not get compiled too early.
Fixes: 1222070e77 ("meson: ensure dbus-display generated code is built before other units")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240214-dbus-v7-2-7eff29f04c34@daynix.com>
In `qemu_console_resize()`, the old surface of the console is keeped if the new
console size is the same as the old one. If the old surface is a placeholder,
and the new size of console is the same as the placeholder surface (640*480),
the surface won't be replace.
In this situation, the surface's `QEMU_PLACEHOLDER_FLAG` flag is still set, so
the console won't be displayed in SDL display mode.
This patch fixes this problem by forcing a new surface if the old one is a
placeholder.
Signed-off-by: Tianlan Zhou <bobby825@126.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240207172024.8-1-bobby825@126.com>
Should an issue like CVE-2023-6683 ever appear again in the future,
it will be more obvious which assumption was violated.
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <20240124105749.204610-2-f.ebner@proxmox.com>
With VNC, a client can send a non-extended VNC_MSG_CLIENT_CUT_TEXT
message with len=0. In qemu_clipboard_set_data(), the clipboard info
will be updated setting data to NULL (because g_memdup(data, size)
returns NULL when size is 0). If the client does not set the
VNC_ENCODING_CLIPBOARD_EXT feature when setting up the encodings, then
the 'request' callback for the clipboard peer is not initialized.
Later, because data is NULL, qemu_clipboard_request() can be reached
via vdagent_chr_write() and vdagent_clipboard_recv_request() and
there, the clipboard owner's 'request' callback will be attempted to
be called, but that is a NULL pointer.
In particular, this can happen when using the KRDC (22.12.3) VNC
client.
Another scenario leading to the same issue is with two clients (say
noVNC and KRDC):
The noVNC client sets the extension VNC_FEATURE_CLIPBOARD_EXT and
initializes its cbpeer.
The KRDC client does not, but triggers a vnc_client_cut_text() (note
it's not the _ext variant)). There, a new clipboard info with it as
the 'owner' is created and via qemu_clipboard_set_data() is called,
which in turn calls qemu_clipboard_update() with that info.
In qemu_clipboard_update(), the notifier for the noVNC client will be
called, i.e. vnc_clipboard_notify() and also set vs->cbinfo for the
noVNC client. The 'owner' in that clipboard info is the clipboard peer
for the KRDC client, which did not initialize the 'request' function.
That sounds correct to me, it is the owner of that clipboard info.
Then when noVNC sends a VNC_MSG_CLIENT_CUT_TEXT message (it did set
the VNC_FEATURE_CLIPBOARD_EXT feature correctly, so a check for it
passes), that clipboard info is passed to qemu_clipboard_request() and
the original segfault still happens.
Fix the issue by handling updates with size 0 differently. In
particular, mark in the clipboard info that the type is not available.
While at it, switch to g_memdup2(), because g_memdup() is deprecated.
Cc: qemu-stable@nongnu.org
Fixes: CVE-2023-6683
Reported-by: Markus Frank <m.frank@proxmox.com>
Suggested-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Markus Frank <m.frank@proxmox.com>
Message-ID: <20240124105749.204610-1-f.ebner@proxmox.com>
The extended clipboard message protocol requires that the client
activate the extension by requesting a psuedo encoding. If this
is not done, then any extended clipboard messages from the client
should be considered invalid and the client dropped.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20240115095119.654271-1-berrange@redhat.com>
The build-previous-qemu job is now trying to fetch from the upstream
repository, but the tag is only fetched into FETCH_HEAD:
$ git remote add upstream https://gitlab.com/qemu-project/qemu 00:00
$ git fetch upstream $QEMU_PREV_VERSION 00:02
warning: redirecting to https://gitlab.com/qemu-project/qemu.git/
From https://gitlab.com/qemu-project/qemu
* tag v8.2.0 -> FETCH_HEAD
$ git checkout $QEMU_PREV_VERSION 00:02
error: pathspec v8.2.0 did not match any file(s) known to git
Fix by fetching the tag into the checkout itself.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow boards to use the device creation functions even if USB itself
is not available; of course the functions will fail inexorably, but
this can be okay if the calls are conditional on the existence of
some USB host controller device. This is for example the case for
hw/mips/loongson3_virt.c.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
target/i386: As specified by Intel Manual Vol2 3-180, cmp instructions
are not allowed to have lock prefix and a `UD` should be raised. Without
this patch, s1->T0 will be uninitialized and used in the case OP_CMPL.
Signed-off-by: Ziqiao Kong <ziqiaokong@gmail.com>
Message-ID: <20240215095015.570748-2-ziqiaokong@gmail.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With more than three years since Meson was introduced in the build system, people
have had quite some time to move away from the foo-softmmu/qemu-system-* and
foo-linux-user/qemu-* symbolic links. Remove them, and with them another
instance of the "softmmu" name for system emulators.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calls to is_enabled are bounded to indices that actually exist in
the SuperIO device. Therefore, the is_enabled functions in
smc37c669 are not doing anything and they can be removed.
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ensure that the value is valid; it can only be zero or one.
And never create a floppy disk controller if it is zero.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no use of ptimer functions in mips_cps.c or any other related
code.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUID leaf 7 was grouped together with SGX leaf 0x12 by commit
b9edbadefb ("i386: Propagate SGX CPUID sub-leafs to KVM") by mistake.
SGX leaf 0x12 has its specific logic to check if subleaf (starting from 2)
is valid or not by checking the bit 0:3 of corresponding EAX is 1 or
not.
Leaf 7 follows the logic that EAX of subleaf 0 enumerates the maximum
valid subleaf.
Fixes: b9edbadefb ("i386: Propagate SGX CPUID sub-leafs to KVM")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20240125024016.2521244-4-xiaoyao.li@intel.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
No such constraint that subleaf index needs to be less than 64.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by:Yang Weijiang <weijiang.yang@intel.com>
Message-ID: <20240125024016.2521244-3-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Existing code misses a decrement of cpuid_i when skip leaf 0x1F.
There's a blank CPUID entry(with leaf, subleaf as 0, and all fields
stuffed 0s) left in the CPUID array.
It conflicts with correct CPUID leaf 0.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by:Yang Weijiang <weijiang.yang@intel.com>
Message-ID: <20240125024016.2521244-2-xiaoyao.li@intel.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use __func__ to avoid hard-coded function name.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240125023328.2520888-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
pc_machine_kvm_type() was introduced by commit e21be724ea ("i386/xen:
add pc_machine_kvm_type to initialize XEN_EMULATE mode") to do Xen
specific initialization by utilizing kvm_type method.
commit eeedfe6c63 ("hw/xen: Simplify emulated Xen platform init")
moves the Xen specific initialization to pc_basic_device_init().
There is no need to keep the PC specific kvm_type() implementation
anymore. So we'll fallback to kvm_arch_get_default_type(), which
simply returns 0.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20231007065819.27498-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_FEATURE_ASYNC_PF_VMEXIT has been introduced for years, however QEMU
doesn't support expose it to guest. Add support for it.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-ID: <20231024083354.1171308-1-xiaoyao.li@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The value of FEAT_XSAVE_XCR0_HI leaf and FEAT_XSAVE_XSS_HI leaf also
need to be masked by XCR0 and XSS mask respectively, to make it
logically correct.
Fixes: 301e90675c ("target/i386: Enable support for XSAVES based features")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Yang Weijiang <weijiang.yang@intel.com>
Message-ID: <20240115091325.1904229-3-xiaoyao.li@intel.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leaf FEAT_XSAVE_XSS_LO and FEAT_XSAVE_XSS_HI also need to be cleared
when CPUID_EXT_XSAVE is not set.
Fixes: 301e90675c ("target/i386: Enable support for XSAVES based features")
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Yang Weijiang <weijiang.yang@intel.com>
Message-ID: <20240115091325.1904229-2-xiaoyao.li@intel.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When msys2 updated their libusb packages to libusb 1.0.27, they
dropped support for building them for mingw32, leaving only mingw64
packages. This broke our CI job, as the 'pacman' package install now
fails with:
error: target not found: mingw-w64-i686-libusb
error: target not found: mingw-w64-i686-usbredir
(both these binary packages are from the libusb source package).
Similarly, spice is now 64-bit only:
error: target not found: mingw-w64-i686-spice
Fix this by dropping these packages from the list we install for our
msys2-32bit build. We do this with a simple mechanism for the
msys2-64bit and msys2-32bit jobs to specify a list of extra packages
to install on top of the common ones we install for both jobs.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2160
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-id: 20240215155009.2422335-1-peter.maydell@linaro.org
Since commit effd60c8 changed how QMP commands are processed, the order
of the block-commit return value and job events in iotests 144 wasn't
fixed and more and caused the test to fail intermittently.
Change the test to cache events first and then print them in a
predefined order.
Waiting three times for JOB_STATUS_CHANGE is a bit uglier than just
waiting for the JOB_STATUS_CHANGE that has "status": "ready", but the
tooling we have doesn't seem to allow the latter easily.
Fixes: effd60c878
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2126
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20240209173103.239994-1-kwolf@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
No need to duplicate AHCIState::ports, directly access it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-9-philmd@linaro.org>
Explicitly set AHCIState::ports before calling ahci_realize().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-8-philmd@linaro.org>
AHCIState::ports should be unsigned. Besides, we never
check it for negative value. It is unlikely it was ever
used with more than INT32_MAX ports, so it is safe to
convert it to unsigned.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213081201.78951-7-philmd@linaro.org>
