Exposing SYSCFG inputs to the SoC is practical in order to wire the SoC
to the optional DM163 display from the board code (GPIOs outputs need
to be connected to both SYSCFG inputs and DM163 inputs).
STM32L4x5 SYSCFG in-irq interception needed to be changed accordingly.
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-3-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This device implements the IM120417002 colors shield v1.1 for Arduino
(which relies on the DM163 8x3-channel led driving logic) and features
a simple display of an 8x8 RGB matrix. The columns of the matrix are
driven by the DM163 and the rows are driven externally.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240424200929.240921-2-ines.varhol@telecom-paris.fr
[PMM: updated to new reset hold method prototype]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use little endian for derivative OTP fuse key.
Cc: qemu-stable@nongnu.org
Fixes: c752bb079b ("hw/nvram: NPCM7xx OTP device model")
Suggested-by: Avi Fishman <Avi.Fishman@nuvoton.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240422125813.1403-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"make check-qtest-aarch64" recently started failing on FreeBSD builds,
and valgrind on Linux also detected that there is something fishy with
the new stm32l4x5-usart: The code forgot to set the correct class_size
here, so the various class_init functions in this file wrote beyond
the allocated buffer when setting the subc->type field.
Fixes: 4fb37aea7e ("hw/char: Implement STM32L4x5 USART skeleton")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240429075908.36302-1-thuth@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The DMA descriptor structures for this device have
a set of "address extension" fields which extend the 32
bit source addresses with an extra 16 bits to give a
48 bit address:
https://docs.amd.com/r/en-US/ug1085-zynq-ultrascale-trm/ADDR_EXT-Field
However, we misimplemented this address extension in several ways:
* we only extracted 12 bits of the extension fields, not 16
* we didn't shift the extension field up far enough
* we accidentally did the shift as 32-bit arithmetic, which
meant that we would have an overflow instead of setting
bits [47:32] of the resulting 64-bit address
Add a type cast and use extract64() instead of extract32()
to avoid integer overflow on addition. Fix bit fields
extraction according to documentation.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: qemu-stable@nongnu.org
Fixes: d3c6369a96 ("introduce xlnx-dpdma")
Signed-off-by: Alexandra Diupina <adiupina@astralinux.ru>
Message-id: 20240428181131.23801-1-adiupina@astralinux.ru
[PMM: adjusted commit message]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In previous versions of the Arm architecture, the frequency of the
generic timers as reported in CNTFRQ_EL0 could be any IMPDEF value,
and for QEMU we picked 62.5MHz, giving a timer tick period of 16ns.
In Armv8.6, the architecture standardized this frequency to 1GHz.
Because there is no ID register feature field that indicates whether
a CPU is v8.6 or that it ought to have this counter frequency, we
implement this by changing our default CNTFRQ value for all CPUs,
with exceptions for backwards compatibility:
* CPU types which we already implement will retain the old
default value. None of these are v8.6 CPUs, so this is
architecturally OK.
* CPUs used in versioned machine types with a version of 9.0
or earlier will retain the old default value.
The upshot is that the only CPU type that changes is 'max'; but any
new type we add in future (whether v8.6 or not) will also get the new
1GHz default.
It remains the case that the machine model can override the default
value via the 'cntfrq' QOM property (regardless of the CPU type).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240426122913.3427983-5-peter.maydell@linaro.org
Currently the sbsa_gdwt watchdog device hardcodes its frequency at
62.5MHz. In real hardware, this watchdog is supposed to be driven
from the system counter, which also drives the CPU generic timers.
Newer CPU types (in particular from Armv8.6) should have a CPU
generic timer frequency of 1GHz, so we can't leave the watchdog
on the old QEMU default of 62.5GHz.
Make the frequency a QOM property so it can be set by the board,
and have our only board that uses this device set that frequency
to the same value it sets the CPU frequency.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240426122913.3427983-4-peter.maydell@linaro.org
Currently QEMU CPUs always run with a generic timer counter frequency
of 62.5MHz, but ARMv8.6 CPUs will run at 1GHz. For older versions of
the TF-A firmware that sbsa-ref runs, the frequency of the generic
timer is hardcoded into the firmware, and so if the CPU actually has
a different frequency then timers in the guest will be set
incorrectly.
The default frequency used by the 'max' CPU is about to change, so
make the sbsa-ref board force the CPU frequency to the value which
the firmware expects.
Newer versions of TF-A will read the frequency from the CPU's
CNTFRQ_EL0 register:
4c77fac98d
so in the longer term we could make this board use the 1GHz
frequency. We will need to make sure we update the binaries used
by our avocado test
Aarch64SbsarefMachine.test_sbsaref_alpine_linux_max_pauth_impdef
before we can do that.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20240426122913.3427983-3-peter.maydell@linaro.org
The generic timer frequency is settable by board code via a QOM
property "cntfrq", but otherwise defaults to 62.5MHz. The way this
is done includes some complication resulting from how this was
originally a fixed value with no QOM property. Clean it up:
* always set cpu->gt_cntfrq_hz to some sensible value, whether
the CPU has the generic timer or not, and whether it's system
or user-only emulation
* this means we can always use gt_cntfrq_hz, and never need
the old GTIMER_SCALE define
* set the default value in exactly one place, in the realize fn
The aim here is to pave the way for handling the ARMv8.6 requirement
that the generic timer frequency is always 1GHz. We're going to do
that by having old CPU types keep their legacy-in-QEMU behaviour and
having the default for any new CPU types be a 1GHz rather han 62.5MHz
cntfrq, so we want the point where the default is decided to be in
one place, and in code, not in a DEFINE_PROP_UINT64() initializer.
This commit should have no behavioural changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240426122913.3427983-2-peter.maydell@linaro.org
The Linux kernel 5.10.16 binary for sunxi has been removed from
apt.armbian.com. This means that the avocado tests for these machines
will be skipped (status CANCEL) if the old binary isn't present in
the avocado cache.
Update to 6.6.16, in the same way we did in commit e384db41d8
when we moved to 5.10.16 in 2021.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2284
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Reviewed-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Tested-by: Niek Linnenbank <nieklinnenbank@gmail.com>
Message-id: 20240415151845.1564201-1-peter.maydell@linaro.org
FEAT_Spec_FPACC is a feature describing speculative behaviour in the
event of a PAC authontication failure when FEAT_FPACCOMBINE is
implemented. FEAT_Spec_FPACC means that the speculative use of
pointers processed by a PAC Authentication is not materially
different in terms of the impact on cached microarchitectural state
(caches, TLBs, etc) between passing and failing of the PAC
Authentication.
QEMU doesn't do speculative execution, so we can advertise
this feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-6-peter.maydell@linaro.org
Newer versions of the Arm ARM (e.g. rev K.a) now define fields for
ID_AA64MMFR3_EL1. Implement this register, so that we can set the
fields if we need to. There's no behaviour change here since we
don't currently set the register value to non-zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-5-peter.maydell@linaro.org
FEAT_ETS2 is a tighter set of guarantees about memory ordering
involving translation table walks than the old FEAT_ETS; FEAT_ETS has
been retired from the Arm ARM and the old ID_AA64MMFR1.ETS == 1
now gives no greater guarantees than ETS == 0.
FEAT_ETS2 requires:
* the virtual address of a load or store that appears in program
order after a DSB cannot be translated until after the DSB
completes (section B2.10.9)
* TLB maintenance operations that only affect translations without
execute permission are guaranteed complete after a DSB
(R_BLDZX)
* if a memory access RW2 is ordered-before memory access RW2,
then RW1 is also ordered-before any translation table walk
generated by RW2 that generates a Translation, Address size
or Access flag fault (R_NNFPF, I_CLGHP)
As with FEAT_ETS, QEMU is already compliant, because we do not
reorder translation table walk memory accesses relative to other
memory accesses, and we always guarantee to have finished TLB
maintenance as soon as the TLB op is done.
Update the documentation to list FEAT_ETS2 instead of the
no-longer-existent FEAT_ETS, and update the 'max' CPU ID registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-4-peter.maydell@linaro.org
FEAT_CSV2_3 adds a mechanism to identify if hardware cannot disclose
information about whether branch targets and branch history trained
in one hardware described context can control speculative execution
in a different hardware context.
There is no branch prediction in TCG, so we don't need to do anything
to be compliant with this. Upadte the '-cpu max' ID registers to
advertise the feature.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240418152004.2106516-3-peter.maydell@linaro.org
As of version DDI0487K.a of the Arm ARM, some architectural features
which previously didn't have official names have been named. Add
these to the list of features which QEMU's TCG emulation supports.
Mostly these are features which we thought of as part of baseline 8.0
support. For SVE and SVE2, the names have been brought into line
with the FEAT_* naming convention of other extensions, and some
sub-components split into separate FEAT_ items. In a few cases (eg
FEAT_CCIDX, FEAT_DPB2) the omission from our list was just an oversight.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240418152004.2106516-2-peter.maydell@linaro.org
For cpus using PMSA, when the MPU is disabled, the default memory
type is Normal, Non-cachable. This means that it should not
have alignment restrictions enforced.
Cc: qemu-stable@nongnu.org
Fixes: 59754f85ed ("target/arm: Do memory type alignment check when translation disabled")
Reported-by: Clément Chigot <chigot@adacore.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Clément Chigot <chigot@adacore.com>
Message-id: 20240422170722.117409-1-richard.henderson@linaro.org
[PMM: trivial comment, commit message tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As it had never been used since the first commit a1477da3dd ("hvf: Add
Apple Silicon support").
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Message-id: 20240422092715.71973-1-zenghui.yu@linux.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
clock_propagate() has an assert that clk->source is NULL, i.e. that
you are calling it on a clock which has no source clock. This made
sense in the original design where the only way for a clock's
frequency to change if it had a source clock was when that source
clock changed. However, we subsequently added multiplier/divider
support, but didn't look at what that meant for propagation.
If a clock-management device changes the multiplier or divider value
on a clock, it needs to propagate that change down to child clocks,
even if the clock has a source clock set. So the assertion is now
incorrect.
Remove the assertion.
Signed-off-by: Raphael Poggi <raphael.poggi@lynxleap.co.uk>
Message-id: 20240419162951.23558-1-raphael.poggi@lynxleap.co.uk
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: Rewrote the commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
libslirp provides a newer slirp_*_hostxfwd API meant for
address-agnostic forwarding instead of the is_udp parameter which is
limited to just TCP/UDP.
This paves the way for IPv6 and Unix socket support.
Signed-off-by: Nicholas Ngai <nicholas@ngai.me>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Breno Leitao <leitao@debian.org>
Message-Id: <20210925214820.18078-1-nicholas@ngai.me>
Since commit c006147122 ("plugins: create CPUPluginState and
migrate plugin_mask") "qemu/plugin.h" uses DECLARE_BITMAP(),
which is declared in "qemu/bitmap.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240418192525.97451-19-philmd@linaro.org>
Only include what is required, avoiding the full
CPUState API from the huge "hw/core/cpu.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-4-philmd@linaro.org>
The following CPUTLBEntry helpers are only used in accel/tcg/cputlb.c:
- tlb_index()
- tlb_entry()
- tlb_read_idx()
- tlb_addr_write()
Move them to this file, allowing to remove the huge "cpu.h" header
inclusion from "exec/cpu_ldst.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-13-philmd@linaro.org>
Declare 'have_guest_base' in "user/guest-base.h".
Very few files require this header, so explicitly include
it there instead of "exec/cpu-all.h" which is used in many
source files.
Assert this user-specific header is only included from user
emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-23-philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
The include/user/ directory contains the user-emulation
specific headers. Move guest-base.h there too.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240418192525.97451-15-philmd@linaro.org>
"exec/cpu_ldst.h" is specific to TCG, do not allow its
inclusion from other accelerators.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-6-philmd@linaro.org>
Avoid TCG specific declarations being used from non-TCG accelerators.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-5-philmd@linaro.org>
The CPUBreakpoint and CPUWatchpoint structures are declared
in "hw/core/cpu.h", which contains declarations related to
CPUState and CPUClass. Some source files only require the
BP/WP definitions and don't need to pull in all CPU* API.
In order to simplify, create a new "exec/breakpoint.h" header.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240418192525.97451-3-philmd@linaro.org>
The MMUAccessType enum is declared in "hw/core/cpu.h".
"hw/core/cpu.h" contains declarations related to CPUState
and CPUClass. Some source files only require MMUAccessType
and don't need to pull in all CPU* declarations. In order
to simplify, create a new "exec/mmu-access-type.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-2-philmd@linaro.org>
The abi_ptr type is declared in "exec/cpu_ldst.h" with all
the load/store helpers. Some source files requiring abi_ptr
type don't need the load/store helpers. In order to simplify,
create a new "exec/abi_ptr.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231212123401.37493-21-philmd@linaro.org>
"exec/user/abitypes.h" requires:
- "exec/cpu-defs.h" (TARGET_LONG_BITS)
- "exec/tswap.h" (tswap32)
In order to avoid "cpu.h", pick the minimum required headers.
Assert this user-specific header is only included from user
emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231212123401.37493-20-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
tswapl() and bswaptls() are target-dependent and only used
by user emulation. Move their definitions to a new header:
"exec/user/tswap-target.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-17-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
We usually check target endianess before swapping values,
so target_words_bigendian() declaration makes sense in
"exec/tswap.h" with the target swapping helpers.
Remove "hw/core/cpu.h" when it was only included to get
the target_words_bigendian() declaration.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-16-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Last use of tswapls() was removed 2 years ago in commit
aee14c77f4 ("linux-user: Rewrite do_getdents, do_getdents64").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-15-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Nothing is required from "qemu/thread.h" in "exec/cpu-all.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-13-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
"exec/cpu-all.h" doesn't need definitions from "qemu/rcu.h",
however "exec/ram_addr.h" does.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-17-philmd@linaro.org>
HVF has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-4-philmd@linaro.org>
NVMM has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-3-philmd@linaro.org>
WHPX has a specific use of the CPUState::vcpu_dirty field
(CPUState::vcpu_dirty is not used by common code).
To make this field accel-specific, add and use a new
@dirty variable in the AccelCPUState structure.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424174506.326-2-philmd@linaro.org>
Since commit 139c1837db ("meson: rename included C source files
to .c.inc"), QEMU standard procedure for included C files is to
use *.c.inc.
Besides, since commit 6a0057aa22 ("docs/devel: make a statement
about includes") this is documented in the Coding Style:
If you do use template header files they should be named with
the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are
being included for expansion.
Therefore rename "exec/helper-head.h" as "exec/helper-head.h.inc".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424173333.96148-4-philmd@linaro.org>
Since commit 139c1837db ("meson: rename included C source files
to .c.inc"), QEMU standard procedure for included C files is to
use *.c.inc.
Besides, since commit 6a0057aa22 ("docs/devel: make a statement
about includes") this is documented in the Coding Style:
If you do use template header files they should be named with
the ``.c.inc`` or ``.h.inc`` suffix to make it clear they are
being included for expansion.
Therefore rename 'store-insert-al16.h' as 'store-insert-al16.h.inc'
and 'load-extract-al16-al8.h' as 'load-extract-al16-al8.h.inc'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240424173333.96148-3-philmd@linaro.org>
Due to missing headers, when including "tb-jmp-cache.h" we might get:
accel/tcg/tb-jmp-cache.h:21:21: error: field ‘rcu’ has incomplete type
21 | struct rcu_head rcu;
| ^~~
accel/tcg/tb-jmp-cache.h:24:9: error: unknown type name ‘vaddr’
24 | vaddr pc;
| ^~~~~
Add the missing "qemu/rcu.h" and "exec/cpu-common.h" headers.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240111162442.43755-1-philmd@linaro.org>
tcg_cpu_init_cflags() accesses CPUState fields, so requires
"hw/core/cpu.h" to get its structure definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20231212123401.37493-12-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
set_helper_retaddr() is only used in accel/tcg/user-exec.c.
clear_helper_retaddr() is only used in accel/tcg/cpu-exec.c
and accel/tcg/user-exec.c.
No need to expose their definitions to all user-emulation
files including "exec/cpu_ldst.h", move them to a new
"user-retaddr.h" header (restricted to accel/tcg/).
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-19-philmd@linaro.org>
The XRSTOR instruction ends calling tlb_flush(), declared
in "exec/exec-all.h".
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231211212003.21686-13-philmd@linaro.org>
We have abi_ulong == uint32_t for the 32-bit ABI.
Use the generic type to avoid to depend on the
"exec/user/abitypes.h" header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240418192525.97451-14-philmd@linaro.org>
'abi_ptr' is a user specific type. The system emulation
equivalent is 'target_ulong'. Use it in ppc_ldl_code()
to emphasis this is not an user emulation function.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231211212003.21686-18-philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
