Implement a model of the Serial Communication Controller (SCC) found
in MPS2 FPGA images.
The primary purpose of this device is to communicate with the
Motherboard Configuration Controller (MCC) which is located on
the MPS board itself, outside the FPGA image. This is used
for programming the MPS clock generators. The SCC also has
some basic ID registers and an output for the board LEDs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-7-git-send-email-peter.maydell@linaro.org
Implement a model of the simple timer device found in the CMSDK.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1500029487-14822-5-git-send-email-peter.maydell@linaro.org
Implement a model of the simple "APB UART" provided in
the Cortex-M System Design Kit (CMSDK).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Model the ARM MPS2/MPS2+ FPGA based development board.
The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger
FPGA but is otherwise the same as the 2). Since the CPU itself
and most of the devices are in the FPGA, the details of the board
as seen by the guest depend significantly on the FPGA image.
We model the following FPGA images:
"mps2_an385" -- Cortex-M3 as documented in ARM Application Note AN385
"mps2_an511" -- Cortex-M3 'DesignStart' as documented in AN511
They are fairly similar but differ in the details for some
peripherals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1500029487-14822-2-git-send-email-peter.maydell@linaro.org
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Largely inspired by the TMP105 temperature sensor, here is a model for
the TMP42{1,2,3} temperature sensors.
Specs can be found here :
http://www.ti.com/lit/gpn/tmp421
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-id: 1496739230-32109-2-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The FTGMAC100 device is an Ethernet controller with DMA function that
can be found on Aspeed SoCs (which include NCSI).
It is fully compliant with IEEE 802.3 specification for 10/100 Mbps
Ethernet and IEEE 802.3z specification for 1000 Mbps Ethernet and
includes Reduced Media Independent Interface (RMII) and Reduced
Gigabit Media Independent Interface (RGMII) interfaces. It adopts an
AHB bus interface and integrates a link list DMA engine with direct
M-Bus accesses for transmitting and receiving packets. It has
independent TX/RX fifos, supports half and full duplex (1000 Mbps mode
only supports full duplex), flow control for full duplex and
backpressure for half duplex.
The FTGMAC100 also implements IP, TCP, UDP checksum offloads and
supports IEEE 802.1Q VLAN tag insertion and removal. It offers
high-priority transmit queue for QoS and CoS applications
This model is backed with a RealTek 8211E PHY which is the chip found
on the AST2500 EVB. It is complete enough to satisfy two different
Linux drivers and a U-Boot driver. Not supported features are :
- IEEE 802.1Q VLAN
- High Priority Transmit Queue
- Wake-On-LAN functions
The code is based on the Coldfire Fast Ethernet Controller model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The NVIC is a core v7M device that exists for all v7M CPUs;
put it under a CONFIG_ARM_V7M rather than hiding it under
CONFIG_STELLARIS.
(We'll use CONFIG_ARM_V7M for the SysTick device too
when we split it out of the NVIC.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1487604965-23220-9-git-send-email-peter.maydell@linaro.org
Both devices seem to be specific to the ARM platform. It's confusing
for the users if they show up on other target architectures, too
(e.g. when the user runs QEMU with "-device ?" to get a list of
supported devices). Thus let's introduce proper configuration switches
so that the devices are only compiled and included when they are
really required.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
At present, the core device model code for 8250-like serial ports
(serial.c) and the code for serial ports attached to ISA-style legacy IO
(serial-isa.c) are both controlled by the CONFIG_SERIAL variable.
There are lots and lots of embedded platforms that have 8250-like serial
ports but have never had anything resembling ISA legacy IO. Therefore,
split serial-isa into its own CONFIG_SERIAL_ISA option so it can be
disabled for platforms where it's not appropriate.
For now, I enabled CONFIG_SERIAL_ISA in every default-config where
CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best
as I can tell, those platforms never used legacy ISA, and also don't
include PCI support (which would allow connection of a PCI->ISA bridge
and/or a southbridge including legacy ISA serial ports).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
The 'base' PCI Express Root Port includes
the common code to be re-used for all
Root Ports implementations. Most of the code
was taken from the current implementation
of Intel's IOH 3420 Root Port.
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add the STM32F2xx ADC device. This device randomly
generates values on each read.
This also includes creating a hw/adc directory.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 3240e660adaf537f55a63ce06096e844aece8cda.1474742262.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The use of the CONFIG_ISA_MMIO setting was removed in
commit 61fcb62862
Author: Paolo Bonzini <pbonzini@redhat.com>
Date: Mon Jul 22 15:54:24 2013 +0200
isa_mmio: delete
but this commit only removed it from some of the default
config files.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1473096320-1638-3-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a minimal model for the devcfg device which is part of Zynq.
This model supports DMA capabilities and interrupt generation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 83df49d8fa2d203a421ca71620809e4b04754e65.1467053537.git.alistair.francis@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will be used by ARM virt machine as a power button.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1458221140-15232-2-git-send-email-zhaoshenglong@huawei.com
[PMM: Use hyphen rather than underscore in type names;
add a comment briefly describing what the device does]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement basic ASPEED timer functionality for the AST2400 SoC[1]: Up to
8 timers can independently be configured, enabled, reset and disabled.
Some hardware features are not implemented, namely clock value matching
and pulse generation, but the implementation is enough to boot the Linux
kernel configured with aspeed_defconfig.
[1] http://www.aspeedtech.com/products.php?fPath=20&rId=376
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1458096317-25223-2-git-send-email-andrew@aj.id.au
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds the system mailboxes which are used to communicate with a
number of GPU peripherals on Pi/Pi2.
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM926
* Interrupt Controller: AVIC
* CCM
* UART x 5
* EPIT x 2
* GPT x 4
* FEC
* I2C x 3
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 62218bfa90f9101f79098e768c3d58bd92dcb7f3.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is based on mcf_fec.c FEC implementation for Coldfire
* A generic PHY was added (borrowwed from LAN9118)
* The buffer management is also modified as buffers are
slightly different between Coldfire and i.MX
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fb314f8a120aa49f8f6ad886f312c649b484fb5a.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The slave mode is not implemented.
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 508dbf2ebe26ec383d3a12a1db5a7890ac8acf20.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For now we support the following devices:
* CPU: ARM1136
* Interrupt Controller: AVIC
* CCM
* UART x 2
* EPIT x 2
* GPT
Signed-off-by: Jean-Christophe Dubois <jcd@tribudubois.net>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f146d819594e41568daec42a1d0f440cdfe3df76.1441057361.git.jcd@tribudubois.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch generates smbios tables for ARM mach-virt. Also add
CONFIG_SMBIOS=y for ARM default config.
Acked-by: Gabriel Somlo <somlo@cmu.edu>
Tested-by: Gabriel Somlo <somlo@cmu.edu>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: Wei Huang <wei@redhat.com>
Message-id: 1440615870-9518-3-git-send-email-wei@redhat.com
[PMM: Added missing braces around an if().]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As core.c, piix4.c, ich9.c and pcihp.c are for x86, add CONFIG_ACPI_X86
to make it only for x86. ARM doesn't support cpu and memory hotplug, add
CONFIG_ACPI_CPU_HOTPLUG and CONFIG_ACPI_MEMORY_HOTPLUG to exclude them
for target-arm.
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-24-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Boards that do not include an USB controller should not provide
USB devices. However, when running "qemu-system-s390x -device help"
for example, there's still a usb-hub, usb-kbd, usb-mouse and
usb-tablet in the list of "supported" devices. Let's fix that
by compiling and linking the USB files only if it is really
necessary.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds the stm32f205 SoC. This will be used by the
Netduino 2 to create a machine.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 48d509747a1ea0d8a7d5480560495e679990f9d2.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx System Configuration
Controller. This is used to configure what memory is mapped
at address 0 (although that is not supported) as well
as configure how the EXTI interrupts work (also not
supported at the moment).
This device is not required for basic examples, but more
complex systems will require it (as well as the EXTI device)
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5d499d7b60b61d5d6dcb310b2e55411b1f53794e.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx USART controller
(UART also uses the same controller).
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 762c6c0d2a41d574932bc4445ec9bfffe6da8798.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the stm32f2xx timers: TIM2, TIM3, TIM4 and TIM5
to QEMU.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 155091a323390f8da3cca496e4c611c493e62a77.1424175342.git.alistair@alistair23.me
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Currently the "platform-bus" device is included for all softmmu builds.
This bridge is intended for use on any platforms that require dynamic
creation of sysbus devices. However, at present it is used only for the
PPC E500 target, with plans for the ARM "virt" target in the immediate
future.
To avoid a not-very-useful entry appearing in "qemu -device ?" output on
other targets, this patch makes a specific config option for platform-bus
and enables it (for now) only on ppc configurations which include E500
and on ARM (which always includes the "virt" target).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <1425017077-18487-3-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The i82801b11, ioh3420 and xio3130 PCI Express devices are currently
included in the build unconditionally.
While they could theoretically appear on any target platform with PCI-E,
they're pretty unlikely to appear on platforms that aren't Intel derived.
Therefore, to avoid presenting unlikely-to-be-relevant devices to the user,
add config options to enable these components, and enable them by default
only on x86 and arm platforms.
(Note that this patch does include these for aarch64, via its inclusion of
arm-softmmu.mak).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-Id: <1425017077-18487-2-git-send-email-david@gibson.dropbear.id.au>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A number of ARM embedded boards include EHCI USB host controllers which
appear as directly mapped devices, rather than sitting on a PCI bus.
At present code to emulate such devices is included whenever EHCI support
is included. This patch adjusts teh config options to only include them
in builds targetting ARM by default.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that we have a working "generic" PCIe host bridge driver, we can plug
it into ARM's virt machine to always have PCIe available to normal ARM VMs.
I've successfully managed to expose a Bochs VGA device, XHCI and an e1000
into an AArch64 VM with this and they all lived happily ever after.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
[PMM: Squashed in fix for off-by-one error in bus-range DT property
from Laszlo Ersek <lersek@redhat.com>]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds support for the Fast Ethernet MAC found on Allwinner
SoCs, together with a basic emulation of Realtek RTL8201CP PHY.
Since there is no public documentation of the Allwinner controller, the
implementation is based on Linux kernel driver.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
DIGIC is Canon Inc.'s name for a family of SoC
for digital cameras and camcorders.
There is no publicly available specification for
DIGIC chips. All information about DIGIC chip
internals is based on reverse engineering efforts
made by CHDK (http://chdk.wikia.com) and
Magic Lantern (http://www.magiclantern.fm) projects
contributors.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1387188908-754-2-git-send-email-antonynpavlov@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The ARM A9 MPCore has a timer that is global to all cores in the cluster.
The timer is shared but each core has a private independent comparator
and interrupt.
Based on version contributed by Francois LEGAL.
Signed-off-by: François LEGAL <devel@thom.fr.eu.org>
Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com
[PC changes:
* New commit message
* Re-implemented as single timer model
* Fixed backwards counting issue in polled mode
* completed VMSD fields
* macroified magic numbers (and headerified reg definitions)
* split of as device-model-only patch
* use bitops for 64 bit register access
* Fixed auto increment mode to check condition properly
* general cleanup (names/style etc).
]
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM:
* minor typo fixes
* added missing return after error_setg()
* dropped setting dc->no_user = 1
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit 9b8c69243 (since reverted) broke the ability to boot the kernel
as the value returned by unassigned_mem_read returned non-zero and left
the kernel looping forever waiting for it to change (see
integrator_led_set in the kernel code).
Relying on a varying implementation detail is incorrect anyway so this
introduces a basic stub of a memory region for the debug/LED section
on the integrator board.
Signed-off-by: Alex Bennée <alex@bennee.com>
Message-id: 1382451366-9539-1-git-send-email-alex.bennee@linaro.org
[PMM: removed three unused fields from struct IntegratorDebugState]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Makefile.target: Build gdbstub-xml.o only when
TARGET_XML_FILES is not empty.
Signed-off-by: Ákos Kovács <akoskovacs@gmx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When individual CONFIG_ switches for the A9MPcore and A15MPcore
devices were created, they were inadvertently given incorrect names
(CONFIG_ARM9MPCORE and CONFIG_ARM15MPCORE). These CPUs are
"Cortex-A9MP" and "Cortex-A15MP", and in particular the ARM9 is
a different (rather older) CPU than the Cortex-A9. Rename the
CONFIG_ switches to bring them into line with the source file
names and CPU names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1376056215-26391-1-git-send-email-peter.maydell@linaro.org
Commit 0434e30afb accidentally removed
the compilation of arm11mpcore.c.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
