Some functions previously used only by vGICv2 are useful also for vGICv3
implementation. Untie them from GICState and make accessible from within
other modules:
- kvm_arm_gic_set_irq()
- kvm_gic_supports_attr() - moved to common code and renamed to
kvm_device_check_attr()
- kvm_gic_access() - turned into GIC-independent kvm_device_access().
Data pointer changed to void * because some GICv3 registers are
64-bit wide
Some of these changes are not used right now, but they will be helpful for
implementing live migration.
Actually kvm_dist_get() and kvm_dist_put() could also be made reusable, but
they would require two extra parameters (s->dev_fd and s->num_cpu) as well as
lots of typecasts of 's' to DeviceState * and back to GICState *. This makes
the code very ugly so i decided to stop at this point. I tried also an
approach with making a base class for all possible GICs, but it would contain
only three variables (dev_fd, cpu_num and irq_num), and accessing them through
the rest of the code would be again tedious (either ugly casts or qemu-style
separate object pointer). So i disliked it too.
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Tested-by: Ashok kumar <ashoks@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 2ef56d1dd64ffb75ed02a10dcdaf605e5b8ff4f8.1441784344.git.p.fedin@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This class is to be used by both software and KVM implementations of GICv3
Currently it is mostly a placeholder, but in future it is supposed to hold
qemu's representation of GICv3 state, which is necessary for migration.
The interface of this class is fully compatible with GICv2 one. This is
done in order to simplify integration with existing code.
Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: Pavel Fedin <p.fedin@samsung.com>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Ashok kumar <ashoks@broadcom.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: aff8baaee493cdcab0694b4a1d4dd5ff27c37ed2.1441784344.git.p.fedin@samsung.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The default should be to allow mmap and new drivers shouldn't need to
expose an option or set it to other than the allocation default in
their initfn. Take advantage of the experimental flag to change this
option to the correct polarity.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Tracing is more effective when we can completely disable all KVM
bypass paths. Make these runtime rather than build-time configurable.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The PAPR interface defines a hypercall to pass high-quality
hardware generated random numbers to guests. Recent kernels can
already provide this hypercall to the guest if the right hardware
random number generator is available. But in case the user wants
to use another source like EGD, or QEMU is running with an older
kernel, we should also have this call in QEMU, so that guests that
do not support virtio-rng yet can get good random numbers, too.
This patch now adds a new pseudo-device to QEMU that either
directly provides this hypercall to the guest or is able to
enable the in-kernel hypercall if available. The in-kernel
hypercall can be enabled with the use-kvm property, e.g.:
qemu-system-ppc64 -device spapr-rng,use-kvm=true
For handling the hypercall in QEMU instead, a "RngBackend" is
required since the hypercall should provide "good" random data
instead of pseudo-random (like from a "simple" library function
like rand() or g_random_int()). Since there are multiple RngBackends
available, the user must select an appropriate back-end via the
"rng" property of the device, e.g.:
qemu-system-ppc64 -object rng-random,filename=/dev/hwrng,id=gid0 \
-device spapr-rng,rng=gid0 ...
See http://wiki.qemu-project.org/Features-Done/VirtIORNG for
other example of specifying RngBackends.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Support hotplug identifier type RTAS_LOG_V6_HP_ID_DRC_COUNT that allows
hotplugging of DRCs by specifying the DRC count.
While we are here, rename
spapr_hotplug_req_add_event() to spapr_hotplug_req_add_by_index()
spapr_hotplug_req_remove_event() to spapr_hotplug_req_remove_by_index()
so that they match with spapr_hotplug_req_add_by_count().
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Parse ibm,architecture.vec table obtained from the guest and enable
memory node configuration via ibm,dynamic-reconfiguration-memory if guest
supports it. This is in preparation to support memory hotplug for
sPAPR guests.
This changes the way memory node configuration is done. Currently all
memory nodes are built upfront. But after this patch, only memory@0 node
for RMA is built upfront. Guest kernel boots with just that and rest of
the memory nodes (via memory@XXX or ibm,dynamic-reconfiguration-memory)
are built when guest does ibm,client-architecture-support call.
Note: This patch needs a SLOF enhancement which is already part of
SLOF binary in QEMU.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Enable memory hotplug for pseries 2.4 and add LMB DR connectors.
With memory hotplug, enforce RAM size, NUMA node memory size and maxmem
to be a multiple of SPAPR_MEMORY_BLOCK_SIZE (256M) since that's the
granularity in which LMBs are represented and hot-added.
LMB DR connectors will be used by the memory hotplug code.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
[spapr_drc_reset implementation]
[since this missed the 2.4 cutoff, changing to only enable for 2.5]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Certain methods in sPAPRDRConnector objects are only ever called by
RTAS and in many cases are responsible for the logic that determines
the RTAS return codes.
Rather than having a level of indirection requiring RTAS code to
re-interpret return values from such methods to determine the
appropriate return code, just pass them through directly.
This requires changing method return types to uint32_t to match the
type of values currently passed to RTAS helpers.
In the case of read accesses like drc->entity_sense() where we weren't
previously reporting any errors, just the read value, we modify the
function to return RTAS return code, and pass the read value back via
reference.
Suggested-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Suggested-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Initialize a hotplug memory region under which all the hotplugged
memory is accommodated. Also enable memory hotplug by setting
CONFIG_MEM_HOTPLUG.
Modelled on i386 memory hotplug.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Logical resources start with allocation-state:UNUSABLE /
isolation-state:ISOLATED. During hotplug, guests will transition
them to allocation-state:USABLE, and then to
isolation-state:UNISOLATED.
For cases where we cannot transition to allocation-state:USABLE,
in this case due to no device/resource being association with
the logical DRC, we should return an error -3.
For physical DRCs, we default to allocation-state:USABLE and stay
there, so in this case we should report an error -3 when the guest
attempts to make the isolation-state:ISOLATED transition for a DRC
with no device associated.
These are as documented in PAPR 2.7, 13.5.3.4.
We also ensure allocation-state:USABLE when the guest attempts
transition to isolation-state:UNISOLATED to deal with misbehaving
guests attempting to bring online an unallocated logical resource.
This is as documented in PAPR 2.7, 13.7.
Currently we implement no such error logic. Fix this by handling
these error cases as PAPR defines.
Cc: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This introduces rtas_ldq() to load 64-bits parameter from continuous
two 4-bytes memory chunk of RTAS parameter buffer, to simplify the
code.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
If drmgr is used in the guest to hotplug a device before a device_add
has been issued via the QEMU monitor, QEMU segfaults in configure_connector
call. This occurs due to accessing of NULL FDT which otherwise would have
been created and associated with the DRC during device_add command.
Check for NULL FDT and return failure from configure_connector call.
As per PAPR+, an error value of -9003 seems appropriate for this failure.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To see the output of the hcall_dprintf statements, you currently have
to enable the DEBUG_SPAPR_HCALLS macro in include/hw/ppc/spapr.h.
This is ugly because a) not every user who wants to debug guest
problems can or wants to recompile QEMU to be able to see such issues,
and b) since this macro is disabled by default, the code in the
hcall_dprintf() brackets tends to bitrot until somebody temporarily
enables that macro again.
Since the hcall_dprintf statements except one indicate guest
problems, let's always use qemu_log_mask(LOG_GUEST_ERROR, ...) for
this macro instead. One spot indicated an unimplemented host feature,
so this is changed into qemu_log_mask(LOG_UNIMP, ...) instead. Now
it's possible to see all those messages by simply adding the CLI
parameter "-d guest_errors,unimp", without the need to re-compile
the binary.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With the previous commit, the generated marshalers just work, and save
us a bit of handwritten code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-23-git-send-email-armbru@redhat.com>
It's first class, because unlike '**', it actually works, i.e. doesn't
require 'gen': false.
'**' will go away next.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
The struct is not used anymore and can be eliminated.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The macro will allow easy registration of a TYPE_MACHINE subclass, using
only the machine name and a MachineClass initialization function as
parameter.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
The macro will be useful to ensure the machine class names follow the
right format to make machine class lookup by class name work correctly.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Similar to error_abort, but doesn't report where the error was
created, and terminates the process with exit(1) rather than abort().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <1441983105-26376-2-git-send-email-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Commits 7216ae3d and d2828429 disabled some error message hints,
all because a change to use modern error reporting meant that the
hint would be output prior to the actual error. Fix this by making
hints a first-class member of Error.
For example, we are now back to the pleasant:
$ qemu-system-x86_64 --nodefaults -S --vnc :0 --chardev null,id=,
qemu-system-x86_64: --chardev null,id=,: Parameter 'id' expects an identifier
Identifiers consist of letters, digits, '-', '.', '_', starting with a letter.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1441901956-21991-1-git-send-email-eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV+Y0VAAoJEL/70l94x66DppAH/393irRPGYJiZqClXDmPZymd
Ilv+mKQIA+QSGiMaVoq0POWqvSa6oPOIOAK8BexhHDWPnxDSeAU9JzjrkwQILjD3
A5kFsR1mhw/oV8aZCsE926SUoY90VH7QP2r0iGdur1VV9DG7CUE8q95umJuU1FCo
hvGI2HjlAPvxSrO+Y5vu4ZNOa5XBiUoLodT0j+jNZfoNMx3irAqkJLPqTUuPT8np
jBeu1MtMe3wNjDBm3WMVZwkNEZ3YtuhRkBeggXqDIl1Jm9lq4Eitk7rtETXm6yHz
Vjp9uAF4en/72gXbELRXp+aWvESEABcouLZrdPV/yjOmQD2oTFC7sZrm1c5rZPw=
=MkK8
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Linux header update and cleanup
* Support for HyperV crash report
* Cleanup of target-specific HMP commands
* Multiarch batch
* Checkpatch fix for Perl 5.22
* NBD fix
* Revert incorrect commit 5243722376
# gpg: Signature made Wed 16 Sep 2015 16:39:01 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (24 commits)
nbd: release exp->blk after all clients are closed
checkpatch: Escape left braces in regex
monitor: uninclude cpu_ldst
include/exec: Move cputlb exec.c defs out
cputlb: Change tlb_set_dirty() arg to cpu
cputlb: move CPU_LOOP() for tlb_reset() to exec.c
translate: move real_host_page setting to -common
tcg: Move tci_tb_ptr to -common
tcg: split tcg_op_defs to -common
translate-all: Move tcg_handle_interrupt() to -common
cpu-exec: Migrate some generic fns to cpu-exec-common
qemu-char: Use g_new() & friends where that makes obvious sense
monitor: added generation of documentation for hmp-commands-info.hx
hmp-commands.hx: fix end of table info
monitor: remove target-specific code from monitor.c
hmp-commands-info: move info_cmds content out of monitor.c
i386/kvm: Hyper-v crash msrs set/get'ers and migration
kvm: Add kvm system event crash handler
cpu: Add crash_occurred flag into CPUState
target-i386: move asm-x86/hyperv.h to standard-headers
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Move the architecture agnostic function prototypes for exec.c out of
cputlb.h to exec-all.h. This allows hiding of the arch specific
cputlb.h from exec.c which should be getting close to having no
architecture specifics. Prepares support for multi-arch, which will have
a minimal cpu.h that services exec.c but not cputlb.h.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <b4fe754c58c860315e35d44430c26b1c967ce2c9.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Change tlb_set_dirty() to accept a CPU instead of an env pointer. This
allows for removal of another CPUArchState usage from prototypes that
need to be QOMified.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <d2b1dcbe7945112989861d8ba7369449c11cc273.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To prepare for multi-arch, cputlb.c should only have awareness of one
single architecture. This means it should not have access to the full
CPU lists which may be heterogeneous. Instead, push the CPU_LOOP() up
to the one and only caller in exec.c.
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-Id: <db06dc6c49f8970caaf116d0385f00ee10a56f2f.1441614289.git.crosthwaite.peter@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move target-specific code out of /monitor.c to /target-*/monitor.c,
this will avoid code cluttering and using random ifdeffery. The solution
is quite simple, but solves the issue of the separation of target-specific
code from monitor.
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CPUState::crash_occurred field inside CPUState marks
that guest crash occurred. This value is added into
cpu common migration subsection.
Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1435924905-8926-12-git-send-email-den@openvz.org>
[Document the new field. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Hyper-V definitions are an industry standard and can be used
from code that is not KVM-specific.
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The update to 4.2 was reviewed by Michael S. Tsirkin and Cornelia
Huck. The further update to 4.3-rc1 only touches KVM files.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add main working flow feature, system call processing feature, and elf64
tilegx binary loading feature, based on Linux kernel tilegx 64-bit
implementation.
[rth: Moved all of the implementation of atomic instructions to a later patch.]
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <BLU436-SMTP938552D42808AA60634582B9660@phx.gbl>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Introduce a QCryptoTLSSession object that will encapsulate
all the code for setting up and using a client/sever TLS
session. This isolates the code which depends on the gnutls
library, avoiding #ifdefs in the rest of the codebase, as
well as facilitating any possible future port to other TLS
libraries, if desired. It makes use of the previously
defined QCryptoTLSCreds object to access credentials to
use with the session. It also includes further unit tests
to validate the correctness of the TLS session handshake
and certificate validation. This is functionally equivalent
to the current TLS session handling code embedded in the
VNC server, and will obsolete it.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
If the administrator incorrectly sets up their x509 certificates,
the errors seen at runtime during connection attempts are very
obscure and difficult to diagnose. This has been a particular
problem for people using openssl to generate their certificates
instead of the gnutls certtool, because the openssl tools don't
turn on the various x509 extensions that gnutls expects to be
present by default.
This change thus adds support in the TLS credentials object to
sanity check the certificates when QEMU first loads them. This
gives the administrator immediate feedback for the majority of
common configuration mistakes, reducing the pain involved in
setting up TLS. The code is derived from equivalent code that
has been part of libvirt's TLS support and has been seen to be
valuable in assisting admins.
It is possible to disable the sanity checking, however, via
the new 'sanity-check' property on the tls-creds object type,
with a value of 'no'.
Unit tests are included in this change to verify the correctness
of the sanity checking code in all the key scenarios it is
intended to cope with. As part of the test suite, the pkix_asn1_tab.c
from gnutls is imported. This file is intentionally copied from the
(long since obsolete) gnutls 1.6.3 source tree, since that version
was still under GPLv2+, rather than the GPLv3+ of gnutls >= 2.0.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Introduce a QCryptoTLSCredsX509 class which is used to
manage x509 certificate TLS credentials. This will be
the preferred credential type offering strong security
characteristics
Example CLI configuration:
$QEMU -object tls-creds-x509,id=tls0,endpoint=server,\
dir=/path/to/creds/dir,verify-peer=yes
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-x509,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCredsAnon class which is used to
manage anonymous TLS credentials. Use of this class is
generally discouraged since it does not offer strong
security, but it is required for backwards compatibility
with the current VNC server implementation.
Simple example CLI configuration:
$QEMU -object tls-creds-anon,id=tls0,endpoint=server
Example using pre-created diffie-hellman parameters
$QEMU -object tls-creds-anon,id=tls0,endpoint=server,\
dir=/path/to/creds/dir
The 'id' value in the -object args will be used to associate the
credentials with the network services. For example, when the VNC
server is later converted it would use
$QEMU -object tls-creds-anon,id=tls0,.... \
-vnc 127.0.0.1:1,tls-creds=tls0
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduce a QCryptoTLSCreds class to act as the base class for
storing TLS credentials. This will be later subclassed to provide
handling of anonymous and x509 credential types. The subclasses
will be user creatable objects, so instances can be created &
deleted via 'object-add' and 'object-del' QMP commands respectively,
or via the -object command line arg.
If the credentials cannot be initialized an error will be reported
as a QMP reply, or on stderr respectively.
The idea is to make it possible to represent and manage TLS
credentials independently of the network service that is using
them. This will enable multiple services to use the same set of
credentials and minimize code duplication. A later patch will
convert the current VNC server TLS code over to use this object.
The representation of credentials will be functionally equivalent
to that currently implemented in the VNC server with one exception.
The new code has the ability to (optionally) load a pre-generated
set of diffie-hellman parameters, if the file dh-params.pem exists,
whereas the current VNC server will always generate them on startup.
This is beneficial for admins who wish to avoid the (small) time
sink of generating DH parameters at startup and/or avoid depleting
entropy.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJV8Tk7AAoJEL/70l94x66Ds3QH/3bi0RRR2NtKIXAQrGo5tfuD
NPMu1K5Hy+/26AC6mEVNRh4kh7dPH5E4NnDGbxet1+osvmpjxAjc2JrxEybhHD0j
fkpzqynuBN6cA2Gu5GUNoKzxxTmi2RrEYigWDZqCftRXBeO2Hsr1etxJh9UoZw5H
dgpU3j/n0Q8s08jUJ1o789knZI/ckwL4oXK4u2KhSC7ZTCWhJT7Qr7c0JmiKReaF
JEYAsKkQhICVKRVmC8NxML8U58O8maBjQ62UN6nQpVaQd0Yo/6cstFTZsRrHMHL3
7A2Tyg862cMvp+1DOX3Bk02yXA+nxnzLF8kUe0rYo6llqDBDStzqyn1j9R0qeqA=
=nB06
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Support for jemalloc
* qemu_mutex_lock_iothread "No such process" fix
* cutils: qemu_strto* wrappers
* iohandler.c simplification
* Many other fixes and misc patches.
And some MTTCG work (with Emilio's fixes squashed):
* Signal-free TCG kick
* Removing spinlock in favor of QemuMutex
* User-mode emulation multi-threading fixes/docs
# gpg: Signature made Thu 10 Sep 2015 09:03:07 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream: (44 commits)
cutils: work around platform differences in strto{l,ul,ll,ull}
cpu-exec: fix lock hierarchy for user-mode emulation
exec: make mmap_lock/mmap_unlock globally available
tcg: comment on which functions have to be called with mmap_lock held
tcg: add memory barriers in page_find_alloc accesses
remove unused spinlock.
replace spinlock by QemuMutex.
cpus: remove tcg_halt_cond and tcg_cpu_thread globals
cpus: protect work list with work_mutex
scripts/dump-guest-memory.py: fix after RAMBlock change
configure: Add support for jemalloc
add macro file for coccinelle
configure: factor out adding disas configure
vhost-scsi: fix wrong vhost-scsi firmware path
checkpatch: remove tests that are not relevant outside the kernel
checkpatch: adapt some tests to QEMU
CODING_STYLE: update mixed declaration rules
qmp: Add example usage of strto*l() qemu wrapper
cutils: Add qemu_strtoull() wrapper
cutils: Add qemu_strtoll() wrapper
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It is unused by now, so we can drop it.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that this parameter is effectively unused, we can drop it and just
pass NULL on to bdrv_open_inherit().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The GIC in ZynqMP cover a 64K address space, however the actual
registers are decoded within a 4K address space and mirrored at the 4K
boundaries. This change fixes the defined size for these regions as it
was set to 0x4000/16K incorrectly.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1441719672-25296-1-git-send-email-nathan@nathanrossi.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch introduces loop exit function, which also
restores guest CPU state according to the value of host
program counter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095702.13280.97477.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Now that the cpu_ld/st_* function directly call helper_ret_ld/st, we can
drop the old helper_ld/st functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095656.13280.7085.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This patch introduces several helpers to pass return address
which points to the TB. Correct return address allows correct
restoring of the guest PC and icount. These functions should be used when
helpers embedded into TB invoke memory operations.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-Id: <20150710095650.13280.32255.stgit@PASHA-ISP>
Signed-off-by: Richard Henderson <rth@twiddle.net>
This is set to true when the index is for an instruction fetch
translation.
The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS
acessors.
All targets ignore it for now, and all other callers pass "false".
This will allow targets who wish to split the mmu index between
instruction and data accesses to do so. A subsequent patch will
do just that for PowerPC.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
