We have not needed to end a TB for I/O since ba3e7926691
("icount: clean up cpu_can_io at the entry to the block").
In use_goto_tb, the check for singlestep_enabled is in the
generic translator_use_goto_tb. In s390x_tr_tb_stop, the
check for singlestep_enabled is in the preceding do_debug test.
Which leaves only FLAG_MASK_PER: fold that test alone into
the two callers of use_exit tb.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The root trace-events only declares a single TCG event:
$ git grep -w tcg trace-events
trace-events:115:# tcg/tcg-op.c
trace-events:137:vcpu tcg guest_mem_before(TCGv vaddr, uint16_t info) "info=%d", "vaddr=0x%016"PRIx64" info=%d"
and only a tcg/tcg-op.c uses it:
$ git grep -l trace_guest_mem_before_tcg
tcg/tcg-op.c
therefore it is pointless to include "trace-tcg.h" in each target
(because it is not used). Remove it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210629050935.2570721-1-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
split sysemu part of cpu models,
also create a tiny _user.c with just the (at least for now),
empty implementation of apply_cpu_model.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-15-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
move kvm files into kvm/
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/kvm/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-14-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
all function calls are protected by kvm_enabled(),
so we do not need the stubs.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-13-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Now that we have moved cpu-dump functionality out of helper.c,
we can make the module sysemu-only.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-11-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
move everything related to translate, as well as HELPER code in tcg/
mmu_helper.c stays put for now, as it contains both TCG and KVM code.
After the reshuffling, update MAINTAINERS accordingly.
Make use of the new directory:
target/s390x/tcg/
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-8-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The internal.h file is renamed to s390x-internal.h, because of the
risk of collision with other files with the same name.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-7-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
now that we protect all calls to the tcg-specific functions
with if (tcg_enabled()), we do not need the TCG stub anymore.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-6-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
the lack of target_user_arch makes it hard to fully leverage the
build system in order to separate user code from sysemu code.
Provide it, so that we can avoid the proliferation of #ifdef
in target code.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Cho, Yu-Chen <acho@suse.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707105324.23400-2-acho@suse.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The element size is located in m5, not in m4. As there is no m4, qemu
currently crashes with an assertion, trying to lookup that field.
Reproduced and tested via GO, which ends up using VMSL once the
Vector enhancements facility is around for verifying certificates with
elliptic curves.
Reported-by: Jonathan Albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/449
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Fixes: 8c18fa5b3eba ("s390x/tcg: Implement VECTOR MULTIPLY SUM LOGICAL")
Message-Id: <20210705090341.58289-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The FP-to-integer conversion instructions need to set CC 3 whenever
a "special case" occurs; this is the case whenever the instruction
also signals the IEEE invalid exception. (See e.g. figure 19-18
in the Principles of Operation.)
However, qemu currently will set CC 3 only in the case where the
input was a NaN. This is indeed one of the special cases, but
there are others, most notably the case where the input is out
of range of the target data type.
This patch fixes the problem by switching these instructions to
the "static" CC method and computing the correct result directly
in the helper. (It cannot be re-computed later as the information
about the invalid exception is no longer available.)
This fixes a bug observed when running the wasmtime test suite
under the s390x-linux-user target.
Signed-off-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210630105058.GA29130@oc3748833570.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This defines 5 new facilities and the new 3931 and 3932 machines.
As before the name is not yet known and we do use gen16a and gen16b.
The new features are part of the full model.
The default model is still empty (same as z15) and will be added
in a separate patch at a later point in time.
Also add the dependencies of new facilities and as a fix for z15 add
a dependency from S390_FEAT_VECTOR_PACKED_DECIMAL_ENH to
S390_VECTOR_PACKED_DECIMAL.
[merged <20210701084348.26556-1-borntraeger@de.ibm.com>]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20210622201923.150205-2-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implement the new semantics in the fallback expansion.
Change all callers to supply the flags that keep the
semantics unchanged locally.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
No change in behaviour, as gdbstub was correctly written to
install and extract the cc value.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-5-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Use s390_cpu_get_psw_mask so that we print the correct
architectural value of psw.mask. Do not print cc_op
unless tcg_enabled.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-4-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use this function for debugging, and debug should
not modify cpu state (even non-architectural cpu state) lest
we introduce heisenbugs.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-3-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Rename to s390_cpu_set_psw and s390_cpu_get_psw_mask at the
same time. Adjust so that they compile for user-only.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Tested-by: jonathan.albrecht <jonathan.albrecht@linux.vnet.ibm.com>
Tested-by: <ruixin.bao@ibm.com>
Message-Id: <20210615030744.1252385-2-richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
TCG implements everything we need to run basic z14 OS+software.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-27-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Everything is wired up and all new instructions are implemented.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-26-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
For IEEE functions, we can reuse the softfloat implementations. For the
other functions, implement it generically for 32bit/64bit/128bit -
carefully taking care of all weird special cases according to the tables
defined in the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-24-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
128 bit -> 64 bit, there is only a single element to process.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-19-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
64 bit -> 128 bit, there is only a single final element.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-18-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In addition to 32/128bit variants, we also have to support the
"Signal-on-QNaN (SQ)" bit.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In case of 128bit, we always have a single element. Add new helpers for
reading/writing 32/128 bit floats.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-14-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fortunately, we only need the Doubleword implementation.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
... and prepare for 32/128 bit support.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-11-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Pass the m5 field via simd_data() and don't provide specialized handlers
for single-element variants.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's rework our macros and simplify. We still need helper functions in
most cases due to the different parameters types.
Next, we'll only have 32/128bit variants for vfi and vfsq, so special
case the others.
Note that for vfsq, the XxC and erm passed in the simd_data() will never be
set, resulting in the same behavior.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's simplify, reworking our handler generation, passing the whole "m5"
register content and not providing specialized handlers for "se", and
reading/writing proper float64 values using new helpers.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's use the correct name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
In case we encounter a NaN, we have to return the smallest possible
number, corresponding to either 0 or the maximum negative number. This
seems to differ from IEEE handling as implemented in softfloat, whereby
we return the biggest possible number.
While at it, use float32_to_uint64() in the CLGEB handler.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20210608092337.12221-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
With commit 0280b3eb7c05 ("s390x/kvm: use cpu model for gscb on
compat machines"), we removed any calls to kvm_s390_get_gs()
in favour of a different mechanism.
Let's remove the unused kvm_s390_get_gs(), and with it the now
unneeded cap_gs as well.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210602125050.492500-1-cohuck@redhat.com>
Commit e50caf4a5c ("tracing: convert documentation to rST")
converted docs/devel/tracing.txt to docs/devel/tracing.rst.
We still have several references to the old file, so let's fix them
with the following command:
sed -i s/tracing.txt/tracing.rst/ $(git grep -l docs/devel/tracing.txt)
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210517151702.109066-2-sgarzare@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
