When qemu_open is passed a filename of the "/dev/fdset/nnn"
format (where nnn is the fdset ID), an fd with matching access
mode flags will be searched for within the specified monitor
fd set. If the fd is found, a dup of the fd will be returned
from qemu_open.
Signed-off-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Otherwise 'make check' won't recompile files that need to be recompiled
because of header changes.
To reproduce the bug, run:
$ make check # succeeds
$ echo B0RKED > hw/mc146818rtc_regs.h
$ make check # is supposed to try to rebuild tests/rtc-test.o and fail
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* mjt/mjt-iov2:
rewrite iov_send_recv() and move it to iov.c
cleanup qemu_co_sendv(), qemu_co_recvv() and friends
export iov_send_recv() and use it in iov_send() and iov_recv()
rename qemu_sendv to iov_send, change proto and move declarations to iov.h
change qemu_iovec_to_buf() to match other to,from_buf functions
consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent
allow qemu_iovec_from_buffer() to specify offset from which to start copying
consolidate qemu_iovec_memset{,_skip}() into single function and use existing iov_memset()
rewrite iov_* functions
change iov_* function prototypes to be more appropriate
virtio-serial-bus: use correct lengths in control_out() message
Conflicts:
tests/Makefile
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently we test our visitors individually, and seperately for input
vs. output. This is useful for validating internal representations
against the native C types and vice-versa, and other visitor-specific
testing, but it doesn't cover the potential use-case of using visitor
pairs for serialization/deserialization very well, and makes it
hard to easily extend the coverage for different C types / boundary
conditions.
To cover that we add a set of unit tests that takes a number of native C
values, passes them into an output visitor, extracts the values with an
input visitor, then compares the result to the original.
Plugging in new visitors to the test harness only requires a user to
implement the SerializeOps interface and add it to a list.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This changes implementations of all iov_*
functions, completing the previous step.
All iov_* functions now ensure that this offset
argument is within the iovec (using assertion),
but lets to specify `bytes' value larger than
actual length of the iovec - in this case they
stops at the actual end of iovec. It is also
suggested to use convinient `-1' value as `bytes'
to mean just this -- "up to the end".
There's one very minor semantic change here: new
requiriment is that `offset' points to inside of
iovec. This is checked just at the end of functions
(assert()), it does not actually need to be enforced,
but using any of these functions with offset pointing
past the end of iovec is wrong anyway.
Note: the new code in iov.c uses arithmetic with
void pointers. I thought this is not supported
everywhere and is a GCC extension (indeed, the C
standard does not define void arithmetic). However,
the original code already use void arith in
iov_from_buf() function:
(memcpy(..., buf + buf_off,...)
which apparently works well so far (it is this
way in qemu 1.0). So I left it this way and used
it in other places.
While at it, add a unit-test file test-iov.c,
to check various corner cases with iov_from_buf(),
iov_to_buf() and iov_memset().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Keeping GENERATED_HEADERS dependencies up-to-date everywhere is complex.
We can simply make the Makefile depend on them, and they will be built
before all other targets.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 93e9eb6808 added fdc-test,
but accidentally removed rtc-test because check-qtest-i386-y was
not enhanced but set twice.
This patch adds rtc-test again (and sorts both tests alphabetically).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When QEMU was built with the simple trace backend, linking failed:
LINK tests/fdc-test
oslib-posix.o: In function `trace_qemu_memalign':
qemu/bin/debug/x86/./trace.h:31: undefined reference to `trace3'
oslib-posix.o: In function `trace_qemu_vmalloc':
qemu/bin/debug/x86/./trace.h:35: undefined reference to `trace2'
oslib-posix.o: In function `trace_qemu_vfree':
qemu/bin/debug/x86/./trace.h:39: undefined reference to `trace1'
collect2: error: ld returned 1 exit status
make: *** [tests/fdc-test] Fehler 1
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add simple m48t59 qtests, enable test only for Sparc32
and Sparc64. On PPC, the device is behind PCI bus.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The special target should not be needed anymore, and caused (perhaps
due to a Make bug) a failure with "make -j2". In any case, the
main makefile is a better place for such special targets rather
than an included makefile.
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Trace objects are also needed if tracing is enabled.
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This also includes a qtest wrapper script to make it easier to launch qtest
tests directly.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This introduces new test reporting infrastructure based on
gtester and gtester-report.
Also, all existing tests are moved to tests/, and tests/Makefile
is reorganized to factor out the commonalities in the rules.
Signed-off-by: Anthony Liguori <aliguori@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While QMP in general is designed so that it is possible to ignore
unknown arguments, in the case of the QMP server it is better to
reject them to detect bad clients. In fact, we're already doing
this at the top level in the argument checker. To extend this to
complex structures, add a mode to the input visitor where it checks
for unvisited keys and raises an error if it finds one.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
All the deps are here but the test was never added to the list of tests
for make check
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This was added by mistake a while back.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This prettifies make output a little by avoiding a very long line.
As gtester prints the checks when they are run, no information is lost.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Remove qruncom target from the Makefile file.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
This patch creates tests/lm32 directory and adds tests for every
LatticeMico32 opcode.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Non-existent -I paths are dropped silently by the compiler, but still
it is not polite to pass bogus options. Configure-time tests do not
need any include files from the source path, so only include -I flags
at make time (when they're properly expanded).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
1) compute path to i386 compiler from configure. If it is found, run
the i386 tests. I use macros so that this approach could be applied
for other arches as well.
2) provide an easily extensible way to add tests
Most tests fail, but at least "make test" does something meaningful.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
path.c grew quite a few new dependencies (mostly via cutils.c),
include them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The vpath directive has two advantages over the VPATH variable:
1) it allows to skip searching of .o files; 2) the default semantics
are to append to the vpath, so there is no confusion between "VPATH=xyz"
and "VPATH+=xyz".
Since "vpath %.c %.h PATH" is not valid, I'm introducing a wrapper
macro to append one or more directories to the vpath.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
