if we used const16 == 0 we would crash qemu with the error:
../tcg/tcg-op.c:196: tcg_gen_shri_i32: Assertion `arg2 >= 0 && arg2 < 32' failed
This whole instruction can be handled by 'tcg_gen_extract2_tl' which
takes care of this special case as well.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Message-Id: <20230202120432.1268-6-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
we were mixing up the "c" and "d" registers. We used "d" as a
destination register und "c" as the source. According to the TriCore ISA
manual 1.6 vol 2 it is the other way round.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653
Message-Id: <20230202120432.1268-4-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
we were mixing up the "c" and "d" registers. We used "d" as a
destination register und "c" as the source. According to the TriCore ISA
manual 1.6 vol 2 it is the other way round.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/653
Message-Id: <20230202120432.1268-2-kbastian@mail.uni-paderborn.de>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
The 'hwaddr' type is defined in "exec/hwaddr.h" as:
hwaddr is the type of a physical address
(its size can be different from 'target_ulong').
All definitions use the 'HWADDR_' prefix, except TARGET_FMT_plx:
$ fgrep define include/exec/hwaddr.h
#define HWADDR_H
#define HWADDR_BITS 64
#define HWADDR_MAX UINT64_MAX
#define TARGET_FMT_plx "%016" PRIx64
^^^^^^
#define HWADDR_PRId PRId64
#define HWADDR_PRIi PRIi64
#define HWADDR_PRIo PRIo64
#define HWADDR_PRIu PRIu64
#define HWADDR_PRIx PRIx64
#define HWADDR_PRIX PRIX64
Since hwaddr's size can be *different* from target_ulong, it is
very confusing to read one of its format using the 'TARGET_FMT_'
prefix, normally used for the target_long / target_ulong types:
$ fgrep TARGET_FMT_ include/exec/cpu-defs.h
#define TARGET_FMT_lx "%08x"
#define TARGET_FMT_ld "%d"
#define TARGET_FMT_lu "%u"
#define TARGET_FMT_lx "%016" PRIx64
#define TARGET_FMT_ld "%" PRId64
#define TARGET_FMT_lu "%" PRIu64
Apparently this format was missed during commit a8170e5e97
("Rename target_phys_addr_t to hwaddr"), so complete it by
doing a bulk-rename with:
$ sed -i -e s/TARGET_FMT_plx/HWADDR_FMT_plx/g $(git grep -l TARGET_FMT_plx)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230110212947.34557-1-philmd@linaro.org>
[thuth: Fix some warnings from checkpatch.pl along the way]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Typo had double-writes to data registers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1363
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Convert the tricore CPU class to use 3-phase reset, so it doesn't
need to use device_class_set_parent_reset() any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Edgar E. Iglesias <edgar@zeroasic.com>
Reviewed-by: Taylor Simpson <tsimpson@quicinc.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20221124115023.2437291-19-peter.maydell@linaro.org
We use the .h.inc extension to include C headers. To be consistent
with the rest of the codebase, rename the C headers using the .def
extension.
IDE/tools using our .editorconfig / .gitattributes will leverage
this consistency.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20221025235006.7215-4-philmd@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The value passed is always true, and if the target's
synchronize_from_tb hook is non-trivial, not exiting
may be erroneous.
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The availability of tb->pc will shortly be conditional.
Introduce accessor functions to minimize ifdefs.
Pass around a known pc to places like tcg_gen_code,
where the caller must already have the value.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Pass these along to translator_loop -- pc may be used instead
of tb->pc, and host_pc is currently unused. Adjust all targets
at one time.
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We commonly define the header guard symbol without an explicit value.
Normalize the exceptions.
Done with scripts/clean-header-guards.pl.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220506134911.2856099-4-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
G_NORETURN was introduced in glib 2.68, fallback to G_GNUC_NORETURN in
glib-compat.
Note that this attribute must be placed before the function declaration
(bringing a bit of consistency in qemu codebase usage).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Warner Losh <imp@bsdimp.com>
Message-Id: <20220420132624.2439741-20-marcandre.lureau@redhat.com>
We have fetched and locked the logfile in translator_loop.
Pass the filepointer down to the disas_log hook so that it
need not be fetched and locked again.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220417183019.755276-13-richard.henderson@linaro.org>
The types are no longer used in bswap.h since commit
f930224fff ("bswap.h: Remove unused float-access functions"), there
isn't much sense in keeping it there and having a dependency on fpu/.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-29-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ArchCPU is our interface with target-specific code. Use it as
a forward-declared opaque pointer (abstract type), having its
structure defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-15-f4bug@amsat.org>
Replace the boilerplate code to declare CPU QOM types
and macros, and forward-declare the CPU instance type.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-14-f4bug@amsat.org>
While CPUState is our interface with generic code, CPUArchState is
our interface with target-specific code. Use CPUArchState as an
abstract type, defined by each target.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220214183144.27402-13-f4bug@amsat.org>
Many files use "qemu/log.h" declarations but neglect to include
it (they inherit it via "exec/exec-all.h"). "exec/exec-all.h" is
a core component and shouldn't be used that way. Move the
"qemu/log.h" inclusion locally to each unit requiring it.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220207082756.82600-10-f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
GDB single-stepping is now handled generically.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing target specific about this. The implementation
is host specific, but the declaration is 100% common.
Reviewed-By: Warner Losh <imp@bsdimp.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The hook is now unused, with breakpoints checked outside translation.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The non-single-step case of gen_goto_tb may use
tcg_gen_lookup_and_goto_ptr to indirectly chain.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just use translator_use_goto_tb directly at the one call site,
rather than maintaining a local wrapper.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Add a target-specific Kconfig. We need the definitions in Kconfig so
the minikconf tool can verify they exits. However CONFIG_FOO is only
enabled for target foo via the meson.build rules.
Two architecture have a particularity, ARM and MIPS. As their
translators have been split you can potentially build a plain 32 bit
build along with a 64-bit version including the 32-bit subset.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210131111316.232778-6-f4bug@amsat.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210707131744.26027-2-alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We no longer have any runtime modifications to this struct,
so declare them all const.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20210227232519.222663-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-21-f4bug@amsat.org>
[rth: Drop declaration movement from target/*/cpu.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a structure to hold handler specific to sysemu.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20210517105140.1062037-15-f4bug@amsat.org>
[rth: Squash "restrict hw/core/sysemu-cpu-ops.h" patch]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
if width was 0 we would run into the assertion:
qemu-system-tricore: tcg/tcg-op.c:217: tcg_gen_sari_i32: Assertion `arg2 >= 0 && arg2 < 32' failed.o
The instruction manual specifies undefined behaviour for this case. So
we bring this in line with the golden Infineon simlator 'tsim', which
simply writes 0 to the result in case of width=0.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
if r3+1 and r2 are the same then we would overwrite r2 with our first
move and use the wrong result for the shift. Thus we store the result
from the mov in a temp.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
According to the TC 1.3.1. Architecture Manual [1; page 174], results are
undefined, if pos + width > 32 and not 31 or if width = 0.
We found this error because of a different behavior between qemu-tricore
and the real tricore processor. For pos + width = 32, qemu-tricore did not
generate any intermediate code and ran into a different state compared to
the real hardware.
[1] https://www.infineon.com/dgdl/tc_v131_instructionset_v138.pdf?fileId=db3a304412b407950112b409b6dd0352
[BK: Add the why to the commit message]
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Andreas Konopik <andreas.konopik@efs-auto.de>
Signed-off-by: Georg Hofstetter <georg.hofstetter@efs-auto.de>
Signed-off-by: David Brenken <david.brenken@efs-auto.de>
Message-Id: <20210211115329.8984-2-david.brenken@efs-auto.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
'int access_type' and ACCESS_INT are unused, drop them.
Provide the mmu_idx argument to match other targets.
'int rw' is actually the MMUAccessType, rename it.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210127224255.3505711-3-f4bug@amsat.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
we cannot in principle make the TCG Operations field definitions
conditional on CONFIG_TCG in code that is included by both common_ss
and specific_ss modules.
Therefore, what we can do safely to restrict the TCG fields to TCG-only
builds, is to move all tcg cpu operations into a separate header file,
which is only included by TCG, target-specific code.
This leaves just a NULL pointer in the cpu.h for the non-TCG builds.
This also tidies up the code in all targets a bit, having all TCG cpu
operations neatly contained by a dedicated data struct.
Signed-off-by: Claudio Fontana <cfontana@suse.de>
Message-Id: <20210204163931.7358-16-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The TCG-specific CPU methods will be moved to a separate struct,
to make it easier to move accel-specific code outside generic CPU
code in the future. Start by moving tcg_initialize().
The new CPUClass.tcg_opts field may eventually become a pointer,
but keep it an embedded struct for now, to make code conversion
easier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[claudio: move TCGCpuOperations inside include/hw/core/cpu.h]
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210204163931.7358-2-cfontana@suse.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is nothing within the translators that ought to be
changing the TranslationBlock data, so make it const.
This does not actually use the read-only copy of the
data structure that exists within the rx region.
Reviewed-by: Joelle van Dyne <j@getutm.app>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Message-Id: <20201023122157.19321-1-chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
One of the goals of having less boilerplate on QOM declarations
is to avoid human error. Requiring an extra argument that is
never used is an opportunity for mistakes.
Remove the unused argument from OBJECT_DECLARE_TYPE and
OBJECT_DECLARE_SIMPLE_TYPE.
Coccinelle patch used to convert all users of the macros:
@@
declarer name OBJECT_DECLARE_TYPE;
identifier InstanceType, ClassType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_TYPE(InstanceType, ClassType,
- lowercase,
UPPERCASE);
@@
declarer name OBJECT_DECLARE_SIMPLE_TYPE;
identifier InstanceType, lowercase, UPPERCASE;
@@
OBJECT_DECLARE_SIMPLE_TYPE(InstanceType,
- lowercase,
UPPERCASE);
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Paul Durrant <paul@xen.org>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200916182519.415636-4-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Some typedefs and macros are defined after the type check macros.
This makes it difficult to automatically replace their
definitions with OBJECT_DECLARE_TYPE.
Patch generated using:
$ ./scripts/codeconverter/converter.py -i \
--pattern=QOMStructTypedefSplit $(git grep -l '' -- '*.[ch]')
which will split "typdef struct { ... } TypedefName"
declarations.
Followed by:
$ ./scripts/codeconverter/converter.py -i --pattern=MoveSymbols \
$(git grep -l '' -- '*.[ch]')
which will:
- move the typedefs and #defines above the type check macros
- add missing #include "qom/object.h" lines if necessary
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-9-ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20200831210740.126168-10-ehabkost@redhat.com>
Message-Id: <20200831210740.126168-11-ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Similar to hw_arch, each architecture defines two sourceset which are placed in
dictionaries target_arch and target_softmmu_arch. These are then picked up
from there when building the per-emulator static_library.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
