Current code does:
- register pre_2_10_vmstate_dummy_icp with "icp/server" and instance
dependinfg on cpu number
- for newer machines, it register vmstate_icp with "icp/server" name
and instance 0
- now it unregisters "icp/server" for the 1st instance.
This is wrong at many levels:
- we shouldn't have two VMSTATEDescriptions with the same name
- In case this is the only solution that we can came with, it needs to
be:
* register pre_2_10_vmstate_dummy_icp
* unregister pre_2_10_vmstate_dummy_icp
* register real vmstate_icp
Created vmstate_replace_hack_for_ppc() with warnings left and right
that it is a hack.
CC: Cedric Le Goater <clg@kaod.org>
CC: Daniel Henrique Barboza <danielhb413@gmail.com>
CC: David Gibson <david@gibson.dropbear.id.au>
CC: Greg Kurz <groug@kaod.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-8-quintela@redhat.com>
Each user network conection create a new slirp instance. We register
more than one slirp instance for number 0.
qemu-system-x86_64: -netdev user,id=hs1: savevm_state_handler_insert: Detected duplicate SaveStateEntry: id=slirp, instance_id=0x0
Broken pipe
../../../../../mnt/code/qemu/full/tests/qtest/libqtest.c:195: kill_qemu() tried to terminate QEMU process but encountered exit status 1 (expected 0)
Aborted (core dumped)
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-6-quintela@redhat.com>
This are the easiest cases, where we were already using
VMSTATE_INSTANCE_ID_ANY.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-3-quintela@redhat.com>
We have lots of cases where we are using an instance_id==0 when we
should be using VMSTATE_INSTANCE_ID_ANY (-1). Basically everything
that can have more than one needs to have a proper instance_id or -1
and the system will take one for it.
vmstate_register_any(): We register with -1.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020090731.28701-2-quintela@redhat.com>
We must not call register_savevm_live() from an instance_init() function
(since this could be called multiple times during device introspection).
Move this to the realize() function instead.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-4-thuth@redhat.com>
There's no need for dedicated handlers here if they don't do anything
special.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-3-thuth@redhat.com>
Since the instance_init() function immediately tries to set the
property to "true", the s390_skeys_set_migration_enabled() tries
to register a savevm handler during instance_init(). However,
instance_init() functions can be called multiple times, e.g. for
introspection of devices. That means multiple instances of devices
can be created during runtime (which is fine as long as they all
don't get realized, too), so the "Prevent double registration of
savevm handler" check in the s390_skeys_set_migration_enabled()
function does not work at all as expected (since there could be
more than one instance).
Thus we must not call register_savevm_live() from an instance_init()
function at all. Move this to the realize() function instead. This
way we can also get rid of the property getter and setter functions
completely, simplifying the code along the way quite a bit.
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020150554.664422-2-thuth@redhat.com>
instance_init() can be called multiple times, e.g. during introspection
of the device. We should not install the vmstate handlers here. Do it
in the realize() function instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231020145554.662751-1-thuth@redhat.com>
- virtio-blk: use blk_io_plug_call() instead of notification BH
- mirror: allow switching from background to active mode
- qemu-img rebase: add compression support
- Fix locking in media change monitor commands
- Fix a few blockjob-related deadlocks when using iothread
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmVBTkERHGt3b2xmQHJl
ZGhhdC5jb20ACgkQfwmycsiPL9ZiqRAAqvsWbblmEGJ7TBKYQK3f8QshJ66RxzbC
4eSjKHrciWNTeeIeU8r8OvFcPPoTcPXxpcmasD2gsAxG5W5N8vkPbBkW+YT4YdDJ
pWJXrbJ15nILC4DmnR1ARVtvxKgv9zy5LSm5bjss1K+OSYJl/nx+ILjmfVZnYDF7
z1dP/G0JxKKm4JzAIdBE3uZS+6Q5kx/wGYlJv8EQmlH3DYfsJfy6Lthe9jfw8ijg
lSqLoQ+D0lEd6Bk4XbkUqqBxFcYBWTfU6qPZoyIO94zCTwTG9yIjmoivxmmfwQZq
cJUTGGZjcxpJYnvcC6P13WgcWBtcD9L2kYFVH0JyjpwcSg9cCGHMF66n9pSlyEGq
DUikwVzbTwOotwzYQyM88v4ET+2+Qdcwn8pRbv9PllEczh0kAsUAEuxSgtz4NEcN
bZrap/16xHFybNOKkMZcmpqxspT5NXKbDODUP0IvbSYMOYpWS983nBTxwMRpyHog
2TFDZu4DjNiPkI2BcYM5VOKk6diNowZFShcEKvoaOLX/n9EBhP0tjoH9VUn1800F
myHrhF2jpIf9GhErMWB7N2W3/0aK0pqdQgbpVnd1ARDdIdYkr7G/S+50D9K80b6n
0q2E7br4S5bcsY0HQzBL9YARSayY+lVOssLoolCWEsYzijdBQmAvs5THajFKcism
/idI6nlp2Vs=
=RdxS
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- virtio-blk: use blk_io_plug_call() instead of notification BH
- mirror: allow switching from background to active mode
- qemu-img rebase: add compression support
- Fix locking in media change monitor commands
- Fix a few blockjob-related deadlocks when using iothread
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmVBTkERHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZiqRAAqvsWbblmEGJ7TBKYQK3f8QshJ66RxzbC
# 4eSjKHrciWNTeeIeU8r8OvFcPPoTcPXxpcmasD2gsAxG5W5N8vkPbBkW+YT4YdDJ
# pWJXrbJ15nILC4DmnR1ARVtvxKgv9zy5LSm5bjss1K+OSYJl/nx+ILjmfVZnYDF7
# z1dP/G0JxKKm4JzAIdBE3uZS+6Q5kx/wGYlJv8EQmlH3DYfsJfy6Lthe9jfw8ijg
# lSqLoQ+D0lEd6Bk4XbkUqqBxFcYBWTfU6qPZoyIO94zCTwTG9yIjmoivxmmfwQZq
# cJUTGGZjcxpJYnvcC6P13WgcWBtcD9L2kYFVH0JyjpwcSg9cCGHMF66n9pSlyEGq
# DUikwVzbTwOotwzYQyM88v4ET+2+Qdcwn8pRbv9PllEczh0kAsUAEuxSgtz4NEcN
# bZrap/16xHFybNOKkMZcmpqxspT5NXKbDODUP0IvbSYMOYpWS983nBTxwMRpyHog
# 2TFDZu4DjNiPkI2BcYM5VOKk6diNowZFShcEKvoaOLX/n9EBhP0tjoH9VUn1800F
# myHrhF2jpIf9GhErMWB7N2W3/0aK0pqdQgbpVnd1ARDdIdYkr7G/S+50D9K80b6n
# 0q2E7br4S5bcsY0HQzBL9YARSayY+lVOssLoolCWEsYzijdBQmAvs5THajFKcism
# /idI6nlp2Vs=
# =RdxS
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 01 Nov 2023 03:58:09 JST
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin: (27 commits)
iotests: add test for changing mirror's copy_mode
mirror: return mirror-specific information upon query
blockjob: query driver-specific info via a new 'query' driver method
qapi/block-core: turn BlockJobInfo into a union
qapi/block-core: use JobType for BlockJobInfo's type
mirror: implement mirror_change method
block/mirror: determine copy_to_target only once
block/mirror: move dirty bitmap to filter
block/mirror: set actively_synced even after the job is ready
blockjob: introduce block-job-change QMP command
virtio-blk: remove batch notification BH
virtio: use defer_call() in virtio_irqfd_notify()
util/defer-call: move defer_call() to util/
block: rename blk_io_plug_call() API to defer_call()
blockdev: mirror: avoid potential deadlock when using iothread
block: avoid potential deadlock during bdrv_graph_wrlock() in bdrv_close()
blockjob: drop AioContext lock before calling bdrv_graph_wrlock()
iotests: Test media change with iothreads
block: Fix locking in media change monitor commands
iotests: add tests for "qemu-img rebase" with compression
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
- add dtc package to openbsd VMs
- use -fno-stack-protector for non-stdlib tests
- split alpha and sh4 compilers into legacy image
- harmonise other compilers into debian-all-test-cross
- fix NULL check in gdb_regs
- fix memleak in semihosting
- remove unused parameter in plugin code
- fix fd leak in lockstep plugin
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVBCvQACgkQ+9DbCVqe
KkR8jAgAjFC3BE6fu80zYT0Dmeu8zh20QY/wgKQebaFfGEmPL4Bqkl2D/Rx7PhQA
EH8fR/LAH/iXAO07+LYOB6QiyMb9PWiXS52iHyE3q11mOaM8iKkkj7a59NW8DfGC
biSrj9o3wpz9gGkJjzTCcHC8DOMbrAuE12XnmhW7uTqqkrcTMC393dSEeyL+nrP9
lKS5XzFyn3FOT4YIL8hAC02ObKH4LpWIO3gdWeDAo56yg24fLir9a2wYSXMaxQtN
kDf6UtL97CIIhbNi6qrUPBB13MV8MlXno3wnb9+E4Cn5sGntGSnTyh7j6XrGqYj9
p/Vio6ye8xP1IjlavKiBM0nnozcAhw==
=ZOMS
-----END PGP SIGNATURE-----
Merge tag 'pull-halloween-omnibus-311023-2' of https://gitlab.com/stsquad/qemu into staging
Maintainer updates for testing, gitlab, gdbstub and plugins:
- add dtc package to openbsd VMs
- use -fno-stack-protector for non-stdlib tests
- split alpha and sh4 compilers into legacy image
- harmonise other compilers into debian-all-test-cross
- fix NULL check in gdb_regs
- fix memleak in semihosting
- remove unused parameter in plugin code
- fix fd leak in lockstep plugin
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmVBCvQACgkQ+9DbCVqe
# KkR8jAgAjFC3BE6fu80zYT0Dmeu8zh20QY/wgKQebaFfGEmPL4Bqkl2D/Rx7PhQA
# EH8fR/LAH/iXAO07+LYOB6QiyMb9PWiXS52iHyE3q11mOaM8iKkkj7a59NW8DfGC
# biSrj9o3wpz9gGkJjzTCcHC8DOMbrAuE12XnmhW7uTqqkrcTMC393dSEeyL+nrP9
# lKS5XzFyn3FOT4YIL8hAC02ObKH4LpWIO3gdWeDAo56yg24fLir9a2wYSXMaxQtN
# kDf6UtL97CIIhbNi6qrUPBB13MV8MlXno3wnb9+E4Cn5sGntGSnTyh7j6XrGqYj9
# p/Vio6ye8xP1IjlavKiBM0nnozcAhw==
# =ZOMS
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 31 Oct 2023 23:11:00 JST
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-halloween-omnibus-311023-2' of https://gitlab.com/stsquad/qemu:
contrib/plugins: Close file descriptor on error return
plugins: Remove an extra parameter
semihosting: fix memleak at semihosting_arg_fallback
gdbstub: Check if gdb_regs is NULL
tests/docker: upgrade debian-all-test-cross to bookworm
tests/docker: use debian-all-test-cross for sparc64
tests/docker: use debian-all-test-cross for riscv64
tests/docker: use debian-all-test-cross for mips
tests/docker: use debian-all-test-cross for mips64
tests/docker: use debian-all-test-cross for m68k
tests/docker: use debian-all-test-cross for hppa
tests/docker: use debian-all-test-cross for power
tests/docker: move sh4 to use debian-legacy-test-cross
tests/docker: use debian-legacy-test-cross for alpha
gitlab: add build-loongarch to matrix
gitlab: clean-up build-soft-softmmu job
gitlab: split alpha testing into a legacy container
tests/tcg: Add -fno-stack-protector
tests/vm/openbsd: Use the system dtc package
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
One part of the test is using a throttled source to ensure that there
are no obvious issues when changing the copy_mode while there are
ongoing requests (source and target images are compared at the very
end).
The other part of the test is using a throttled target to ensure that
the change to active mode actually happened. This is done by hitting
the throttling limit, issuing a synchronous write and then immediately
verifying the target side. QSD is used, because otherwise, a
synchronous write would hang there.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-11-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
To start out, only actively-synced is returned.
For example, this is useful for jobs that started out in background
mode and switched to active mode. Once actively-synced is true, it's
clear that the mode switch has been completed. Note that completion of
the switch might happen much earlier, e.g. if the switch happens
before the job is ready, once all background operations have finished.
It's assumed that whether the disks are actively-synced or not is more
interesting than whether the mode switch completed. That information
can still be added if required in the future.
In presence of an iothread, the actively_synced member is now shared
between the iothread and the main thread, so turn accesses to it
atomic.
Requires to adapt the output for iotest 109.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-10-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-9-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to additionally return job-type-specific information.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20231031135431.393137-8-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to turn BlockJobInfo into a union with @type as the
discriminator. That requires it to be an enum. Even without that
requirement, it's nicer to have an enum instead of a str here.
No functional change is intended.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231031135431.393137-7-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
which allows switching the @copy-mode from 'background' to
'write-blocking'.
This is useful for management applications, so they can start out in
background mode to avoid limiting guest write speed and switch to
active mode when certain criteria are fulfilled.
In presence of an iothread, the copy_mode member is now shared between
the iothread and the main thread, so turn accesses to it atomic.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-6-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to allow changing the copy_mode via QMP. When running
in an iothread, it could be that copy_mode is changed from the main
thread in between reading copy_mode in bdrv_mirror_top_pwritev() and
reading copy_mode in bdrv_mirror_top_do_write(), so they might end up
disagreeing about whether copy_to_target is true or false. Avoid that
scenario by determining copy_to_target only once and passing it to
bdrv_mirror_top_do_write() as an argument.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20231031135431.393137-5-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to allow switching to active mode without draining.
Initialization of the bitmap in mirror_dirty_init() still happens with
the original/backing BlockDriverState, which should be fine, because
the mirror top has the same length.
Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231031135431.393137-4-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In preparation to allow switching from background to active mode. This
ensures that setting actively_synced will not be missed when the
switch happens after the job is ready.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20231031135431.393137-3-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
which will allow changing job-type-specific options after job
creation.
In the JobVerbTable, the same allow bits as for set-speed are used,
because set-speed can be considered an existing change command.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <20231031135431.393137-2-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
There is a batching mechanism for virtio-blk Used Buffer Notifications
that is no longer needed because the previous commit added batching to
virtio_notify_irqfd().
Note that this mechanism was rarely used in practice because it is only
enabled when EVENT_IDX is not negotiated by the driver. Modern drivers
enable EVENT_IDX.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-5-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio-blk and virtio-scsi invoke virtio_irqfd_notify() to send Used
Buffer Notifications from an IOThread. This involves an eventfd
write(2) syscall. Calling this repeatedly when completing multiple I/O
requests in a row is wasteful.
Use the defer_call() API to batch together virtio_irqfd_notify() calls
made during thread pool (aio=threads), Linux AIO (aio=native), and
io_uring (aio=io_uring) completion processing.
Behavior is unchanged for emulated devices that do not use
defer_call_begin()/defer_call_end() since defer_call() immediately
invokes the callback when called outside a
defer_call_begin()/defer_call_end() region.
fio rw=randread bs=4k iodepth=64 numjobs=8 IOPS increases by ~9% with a
single IOThread and 8 vCPUs. iodepth=1 decreases by ~1% but this could
be noise. Detailed performance data and configuration specifics are
available here:
https://gitlab.com/stefanha/virt-playbooks/-/tree/blk_io_plug-irqfd
This duplicates the BH that virtio-blk uses for batching. The next
commit will remove it.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-4-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The networking subsystem may wish to use defer_call(), so move the code
to util/ where it can be reused.
As a reminder of what defer_call() does:
This API defers a function call within a defer_call_begin()/defer_call_end()
section, allowing multiple calls to batch up. This is a performance
optimization that is used in the block layer to submit several I/O requests
at once instead of individually:
defer_call_begin(); <-- start of section
...
defer_call(my_func, my_obj); <-- deferred my_func(my_obj) call
defer_call(my_func, my_obj); <-- another
defer_call(my_func, my_obj); <-- another
...
defer_call_end(); <-- end of section, my_func(my_obj) is called once
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-3-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Prepare to move the blk_io_plug_call() API out of the block layer so
that other subsystems call use this deferred call mechanism. Rename it
to defer_call() but leave the code in block/plug.c.
The next commit will move the code out of the block layer.
Suggested-by: Ilya Maximets <i.maximets@ovn.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230913200045.1024233-2-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch closes the file descriptor fd on error return to avoid
resource leak.
Fixes: ec7ee95db9 ("contrib/plugins: fix coverity warning in lockstep")
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Message-Id: <20231018025225.1640122-1-liucong2@kylinos.cn>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-20-alex.bennee@linaro.org>
copy_call() has an unused parameter so remove it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231019101030.128431-7-akihiko.odaki@daynix.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231029145033.592566-19-alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
We duplicate "cmd" as strtok may modify its argument, but we forgot
to free it later. Furthermore, add_semihosting_arg doesn't take
responsibility for this memory either (it strdup's the argument).
Signed-off-by: Matheus Tavares Bernardino <quic_mathbern@quicinc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <03d81c56bfc3d08224e4106efca5949d8894cfa5.1697801632.git.quic_mathbern@quicinc.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-18-alex.bennee@linaro.org>
cpu->gdb_regs may be NULL if no coprocessor is registered.
Fixes: 73c392c26b ("gdbstub: Replace gdb_regs with an array")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231029145033.592566-17-alex.bennee@linaro.org>
Message-Id: <20231019101030.128431-2-akihiko.odaki@daynix.com>
Tested-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
This requires a few more tweaks than usual as:
- the default sources format has changed
- bring in python3-tomli from the repos
- split base install from cross compilers
- also include libclang-rt-dev for sanitiser builds
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-16-alex.bennee@linaro.org>
Maintaining two sets of containers for test building is silly. While
it makes sense for the QEMU cross-compile targets to have their own
fat containers built by lcitool we might as well merge the other
random debian based compilers into the same one used on gitlab.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-15-alex.bennee@linaro.org>
Maintaining two sets of containers for test building is silly. While
it makes sense for the QEMU cross-compile targets to have their own
fat containers built by lcitool we might as well merge the other
random debian based compilers into the same one used on gitlab.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-14-alex.bennee@linaro.org>
Maintaining two sets of containers for test building is silly. While
it makes sense for the QEMU cross-compile targets to have their own
fat containers built by lcitool we might as well merge the other
random debian based compilers into the same one used on gitlab.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-13-alex.bennee@linaro.org>
Maintaining two sets of containers for test building is silly. While
it makes sense for the QEMU cross-compile targets to have their own
fat containers built by lcitool we might as well merge the other
random debian based compilers into the same one used on gitlab.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-12-alex.bennee@linaro.org>
Maintaining two sets of containers for test building is silly. While
it makes sense for the QEMU cross-compile targets to have their own
fat containers built by lcitool we might as well merge the other
random debian based compilers into the same one used on gitlab.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-11-alex.bennee@linaro.org>
Maintaining two sets of containers for test building is silly. While
it makes sense for the QEMU cross-compile targets to have their own
fat containers built by lcitool we might as well merge the other
random debian based compilers into the same one used on gitlab.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-10-alex.bennee@linaro.org>
Maintaining two sets of containers for test building is silly. While
it makes sense for the QEMU cross-compile targets to have their own
fat containers built by lcitool we might as well merge the other
random debian based compilers into the same one used on gitlab.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-9-alex.bennee@linaro.org>
sh4 is another target which doesn't work with bookworm compilers. To
keep on buster move across to the debian-legacy-test-cross image and
update accordingly.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231030135715.800164-1-alex.bennee@linaro.org>
Maintaining two sets of containers for test building is silly. While
it makes sense for the QEMU cross-compile targets to have their own
fat containers built by lcitool we might as well merge the other
random debian based compilers into the same one used on gitlab.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-7-alex.bennee@linaro.org>
We have the compiler and with a few updates a container that can build
QEMU so we should at least run the check-tcg smoke tests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-6-alex.bennee@linaro.org>
Having dropped alpha we also now drop xtensa as we don't have the
compiler in this image. It's not all doom and gloom though as a number
of other targets have gained softmmu TCG tests so we can add them. We
will take care of the other targets with their own containers in
future commits.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-5-alex.bennee@linaro.org>
The current bookworm compiler doesn't build the static binaries due to
bug #1054412 and it might be awhile before it gets fixed. The problem
of keeping older architecture compilers running isn't going to go away
so lets prepare the ground. Create a legacy container and move some
tests around so the others can get upgraded.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-4-alex.bennee@linaro.org>
A build of GCC 13.2 will have stack protector enabled by default if it
was configured with --enable-default-ssp option. For such a compiler,
it is necessary to explicitly disable stack protector when linking
without standard libraries.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20230731091042.139159-3-akihiko.odaki@daynix.com>
[AJB: fix comment string typo]
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-3-alex.bennee@linaro.org>
We can use the pre-packaged libfdt from the dtc package to avoid
that we have to compile this code each time again and again.
While we're at it, the "--python=python3" does not seemt to be
necessary anymore, so we can drop it.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231016154049.37147-1-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-2-alex.bennee@linaro.org>
The bdrv_getlength() function is a generated co-wrapper and uses
AIO_WAIT_WHILE() to wait for the spawned coroutine. AIO_WAIT_WHILE()
expects the lock to be acquired exactly once.
Fix a case where it may be acquired twice. This can happen when the
source node is explicitly specified as the @replaces parameter or if the
source node is a filter node.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231019131936.414246-4-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
by passing the BlockDriverState along, so the held AioContext can be
dropped before polling. See commit 31b2ddfea3 ("graph-lock: Unlock the
AioContext while polling") which introduced this functionality for
more information.
The only way to reach bdrv_close() is via bdrv_unref() and for calling
that the BlockDriverState's AioContext lock is supposed to be held.
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231019131936.414246-3-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Same rationale as in 31b2ddfea3 ("graph-lock: Unlock the AioContext
while polling"). Otherwise, a deadlock can happen.
The alternative would be to pass a BlockDriverState along to
bdrv_graph_wrlock(), but there is no BlockDriverState readily
available and it's also better conceptually, because the lock is held
for the job.
The function is always called with the job's AioContext lock held, via
one of the .abort, .clean, .free or .prepare job driver functions.
Thus, it's safe to drop it.
While mirror_exit_common() does hold a second AioContext lock while
calling block_job_remove_all_bdrv(), that is for the main thread's
AioContext and does not need to be dropped (bdrv_graph_wrlock(bs) also
skips dropping the lock if bdrv_get_aio_context(bs) ==
qemu_get_aio_context()).
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Message-ID: <20231019131936.414246-2-f.ebner@proxmox.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
iotests case 118 already tests all relevant operations for media change
with multiple devices, however never with iothreads. This changes the
test so that the virtio-scsi tests run with an iothread.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231013153302.39234-3-kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
blk_insert_bs() requires that the caller holds the AioContext lock for
the node to be inserted. Since commit c066e808e1, neglecting to do so
causes a crash when the child has to be moved to a different AioContext
to attach it to the BlockBackend.
This fixes qmp_blockdev_insert_anon_medium(), which is called for the
QMP commands 'blockdev-insert-medium' and 'blockdev-change-medium', to
correctly take the lock.
Cc: qemu-stable@nongnu.org
Fixes: https://issues.redhat.com/browse/RHEL-3922
Fixes: c066e808e1
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231013153302.39234-2-kwolf@redhat.com>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>