Make monitor command 'dump-guest-memory' be able to dump in kdump-compressed
format. The command's usage:
dump [-p] protocol [begin] [length] [format]
'format' is used to specified the format of vmcore and can be:
1. 'elf': ELF format, without compression
2. 'kdump-zlib': kdump-compressed format, with zlib-compressed
3. 'kdump-lzo': kdump-compressed format, with lzo-compressed
4. 'kdump-snappy': kdump-compressed format, with snappy-compressed
Without 'format' being set, it is same as 'elf'. And if non-elf format is
specified, paging and filter is not allowed.
Note:
1. The kdump-compressed format is readable only with the crash utility and
makedumpfile, and it can be smaller than the ELF format because of the
compression support.
2. The kdump-compressed format is the 6th edition.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
functions are used to write page to vmcore. vmcore is written page by page.
page desc is used to store the information of a page, including a page's size,
offset, compression format, etc.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
DataCache is used to store data temporarily, then the data will be written to
vmcore. These functions will be called later when writing data of page to
vmcore.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
functions are used to write 1st and 2nd dump_bitmap of kdump-compressed format,
which is used to indicate whether the corresponded page is existed in vmcore.
1st and 2nd dump_bitmap are same, because dump level is specified to 1 here.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
the functions are used to write header of kdump-compressed format to vmcore.
Header of kdump-compressed format includes:
1. common header: DiskDumpHeader32 / DiskDumpHeader64
2. sub header: KdumpSubHeader32 / KdumpSubHeader64
3. extra information: only elf notes here
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
add some members to DumpState that will be used in writing vmcore in
kdump-compressed format. some of them, like page_size, will be initialized
in the patch.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
the function can be used by write_elf32_notes/write_elf64_notes to write notes
to a buffer. If fd_write_vmcore is used, write_elf32_notes/write_elf64_notes
will write elf notes to vmcore directly. Instead, if buf_write_note is used,
elf notes will be written to opaque->note_buf at first.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Function is used to write vmcore in flatten format. In flatten format, data is
written block by block, and in front of each block, a struct
MakedumpfileDataHeader is stored there to indicate the offset and size of the
data block.
struct MakedumpfileDataHeader {
int64_t offset;
int64_t buf_size;
};
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
flatten format will be used when writing kdump-compressed format. The format is
also used by makedumpfile, you can refer to the following URL to get more
detailed information about flatten format of kdump-compressed format:
http://sourceforge.net/projects/makedumpfile/
The two functions here are used to write start flat header and end flat header
to vmcore, and they will be called later when flatten format is used.
struct MakedumpfileHeader stored at the head of vmcore is used to indicate the
vmcore is in flatten format.
struct MakedumpfileHeader {
char signature[16]; /* = "makedumpfile" */
int64_t type; /* = 1 */
int64_t version; /* = 1 */
};
And struct MakedumpfileDataHeader, with offset and buf_size set to -1, is used
to indicate the end of vmcore in flatten format.
struct MakedumpfileDataHeader {
int64_t offset; /* = -1 */
int64_t buf_size; /* = -1 */
};
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
write_elf32_notes/wirte_elf64_notes use fd_write_vmcore to write elf notes to
vmcore. Adding parameter "WriteCoreDumpFunction f" makes it available to choose
the method of writing elf notes
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
WriteCoreDumpFunction is a function pointer that points to the function used to
write content in "buf" into core file, so "buf" should be const-qualify.
Signed-off-by: Qiao Nuohan <qiaonuohan@cn.fujitsu.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
We should check for error with s->note_size
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
While the machine is paused, in guest_phys_blocks_append() we register a
one-shot MemoryListener, solely for the initial collection of the valid
guest-physical memory ranges that happens at listener registration time.
For each range that is reported to guest_phys_blocks_region_add(), we
attempt to merge the range with the preceding one.
Ranges can only be joined if they are contiguous in both guest-physical
address space, and contiguous in host virtual address space.
The "maximal" ranges that remain in the end constitute the guest-physical
memory map that the dump will be based on.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The vmcore must use physical addresses that are visible to the guest, not
addresses that point into linear RAMBlocks. As first step, introduce the
list type into which we'll collect the physical mappings in effect at the
time of the dump.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Even a trusted & clean-state guest can map more memory than what it was
given. Since the vmcore contains RAMBlocks, mapping sizes should be
clamped to RAMBlock sizes. Otherwise such oversized mappings can exceed
the entire file size, and ELF parsers might refuse even the valid portion
of the PT_LOAD entry.
Related RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=981582
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Pass any Error out into dump_init() and have it actually stop on errors.
Whether it is unsupported on a certain CPU can be checked by looking for
a NULL CPUClass::get_memory_mapping field.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
[AF: Reverted changes to CPU loops]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Instead of calling cpu_synchronize_state() for each CPU, call the
existing cpu_synchronize_all_states() helper.
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Headers in include/exec/ are for the deepest innards of QEMU,
they should almost never be included directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are
reserved) and its purpose doesn't match the name (most target_phys_addr_t
addresses are not target specific). Replace it with a finger-friendly,
standards conformant hwaddr.
Outstanding patchsets can be fixed up with the command
git rebase -i --exec 'find -name "*.[ch]"
| xargs s/target_phys_addr_t/hwaddr/g' origin
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
fd_write_vmcore() will indefinitely spin for a non-blocking
file-descriptor that would block. However, if the fd is non-blocking,
how does it make sense to spin?
Change this behavior to return an error instead.
Note that this can only happen with an fd provided by a management
application. The fd opened internally by dump-guest-memory is blocking.
While there, also fix 'writen_size' variable name.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
dump.c was recently added to the code. It unconditionally
includes sys/procfs which is not available with MinGW (w32, w64).
It looks like this file is not needed at all (tested on Linux),
so I removed it completely.
Some other include statements are also redundant because they are
already included in qemu-common, therefore they were removed, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This simplifies things, because they will only be included for softmmu
targets and because the stubs are taken out-of-line in separate files,
which in the future could even be compiled only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The command's usage:
dump-guest-memory [-p] protocol [begin] [length]
The supported protocol can be file or fd:
1. file: the protocol starts with "file:", and the following string is
the file's path.
2. fd: the protocol starts with "fd:", and the following string is the
fd's name.
Note:
1. If you want to use gdb to process the core, please specify -p option.
The reason why the -p option is not default is:
a. guest machine in a catastrophic state can have corrupted memory,
which we cannot trust.
b. The guest machine can be in read-mode even if paging is enabled.
For example: the guest machine uses ACPI to sleep, and ACPI sleep
state goes in real-mode.
2. If you don't want to dump all guest's memory, please specify the start
physical address and the length.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
