In some cases, these commands still use the deprecated @device
parameter. Fix that so we can later drop that parameter from their
interface.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110224302.14424-2-mreitz@redhat.com
Reviewed-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
We can easily repair unaligned preallocated zero clusters by discarding
them, so why not do it?
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20171110203759.14018-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This patch implements a test case for the scenario that was failing
prior to the patch "migration/ram.c: do not set 'postcopy_running' in
POSTCOPY_INCOMING_END", commit acab30b85d.
This new test file 201 was derived from the test file 181 authored
by Kevin Wolf.
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 881cfd17 added a new test binary, include it in .gitignore.
Reported-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Pin-based interrupt of NVMe controller did not work properly
because using an obsolated function pci_irq_pulse().
To fix this, change to use pci_irq_assert() / pci_irq_deassert()
instead of pci_irq_pulse().
Signed-off-by: Hikaru Nishida <hikarupsp@gmail.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
We could hit lock failure if there is a signal that makes fcntl return
-1 and errno set to EINTR. In this case we should retry.
Cc: qemu-stable@nongnu.org
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
laying on the mailing list for a while, but apparently no
maintainer feels really responsible for picking up.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQIcBAABAgAGBQJaZcaYAAoJEC7Z13T+cC21ab0P/3fE52pp0BEWRfM3MkTyJCgs
c3ZDR2raLsrwl5MMoeV6TCZ8ILp3RR5ipdnpsxAlUKi0e953hduFXJ/A9meElogu
i1BdCl7SBYUWXg9WKqH5cX9LGiGiRLQ53KehCB6wa4nXBjkL1bGtbprbp5kCb+Sn
tavBoIqkwxC2VvqJHL23uS7n/3bPkr4XA1bA/VWezm7be6f5bEqBzORdxPabRC3f
M7b1ntl2Xj9PXpwKZkHgET8Wg1Ne5kCUvvx9o22iMuHhBHsxAmMc06Q96wihDUI3
/CwzaErGrykGRX95y++yaBMUEYMSk90dv9cXHTMryDw/0id0OMnpcGm6SeQHlcQT
ATrhnH1VzEcgGJPYpqKxNvb0pJZ7t7gYUSi0HMC83PG2S9wD/kBvtB8rqumTolKB
cvI6l7PFfCZIr3FsTyGHX1KVRHX8PWljnKIvAbyUEuK4XDnSX7hT+7jQvuxj4HSZ
/ZlksnSIHcUf5gx6zG2StVKo5TEnY6JUhf8CuQeILW0ZGj6V/aUFbR5aMmgVinyj
p/2OOUsze6rYCcpVE2kI7hSMrSXk4QfvPyIvjGf86EVxTM4SK03bP4QVFwtZtFzA
HXXFIgKNcE7I7BhghC6PLcmHaYBiK8A5EIvXpgi4tD7L3PFLos6wtR6T2ze3mBn2
JyKxGw9rExlAJMi5/WE9
=JCAM
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth/tags/pull-request-2018-01-22' into staging
Pull request for various patches that have been reviewed and
laying on the mailing list for a while, but apparently no
maintainer feels really responsible for picking up.
# gpg: Signature made Mon 22 Jan 2018 11:10:16 GMT
# gpg: using RSA key 0x2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>"
# gpg: aka "Thomas Huth <thuth@redhat.com>"
# gpg: aka "Thomas Huth <huth@tuxfamily.org>"
# gpg: aka "Thomas Huth <th.huth@posteo.de>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth/tags/pull-request-2018-01-22:
hw/isa: Replace fprintf(stderr, "*\n" with error_report()
hw/ipmi: Replace fprintf(stderr, "*\n" with error_report()
hw/bt: Replace fprintf(stderr, "*\n" with error_report()
Fixes after renaming __FUNCTION__ to __func__
Replace all occurances of __FUNCTION__ with __func__
tests/cpu-plug-test: Test CPU hot-plugging on s390x
tests/cpu-plug-test: Check CPU hot-plugging on ppc64, too
tests/cpu-plug-test: Check the CPU hot-plugging with device_add, too
tests: Rename pc-cpu-test.c to cpu-plug-test.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commits
ca6011c migration: add postcopy total blocktime into query-migrate
5f32dc8 migration: add blocktime calculation into migration-test
2f7dae9 migration: postcopy_blocktime documentation
3be98be migration: calculate vCPU blocktime on dst side
01a87f0 migration: add postcopy blocktime ctx into MigrationIncomingState
31bf06a migration: introduce postcopy-blocktime capability
as they don't build on ppc32 due to trying to do atomic accesses
on types that are larger than the host pointer type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Coverity warnings CID 1385146, 1385148 1385149 and 1385150 point that
xtensa_opcode_num_operands and xtensa_format_num_slots may return -1
even when xtensa_opcode_decode and xtensa_format_decode succeed. In that
case unsigned counters used to iterate through operands/slots will not
do the right thing.
Make counters and loop bounds signed to fix the warnings.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The sample_controller core is a simple noMMU general purpose core, modern
analog of de212. It is used as a default core in the xtensa port of
Zephyr.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Define default core for noMMU configurations and use that core as
machine default with noMMU XTFPGA machines.
This is done to avoid offering non-working configuration (MMU core on a
noMMU machine) as a default.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Since parallels format supports backing files, refine
readv/writev (allocate_clusters) to redirect read/write requests
to a backing file (if cluster is not available in the current bs).
Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Message-id: 20180112090122.1702-6-klim.kireev@virtuozzo.com
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
To implement xml format, some defines and structures
from parallels.c are required.
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Message-id: 20180112090122.1702-4-klim.kireev@virtuozzo.com
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This dependency is required for adequate Parallels images support.
Typically the disk consists of several images which are glued by
XML disk descriptor. Also XML hides inside several important parameters
which are not available in the image header.
The patch also adds clause to checkpatch.pl to understand libxml2 types.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20180112090122.1702-3-klim.kireev@virtuozzo.com
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch adds main information about Parallels Disk
format, which consists of DiskDescriptor.xml and other files.
Signed-off-by: Edgar Kaziakhmedov <edgar.kaziakhmedov@virtuozzo.com>
Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Message-id: 20180112090122.1702-2-klim.kireev@virtuozzo.com
CC: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The block_set_io_throttle command can look up BlockBackends by the
attached qdev device ID. virtio-blk-pci is a special case because the
actual VirtIOBlock device is the "/virtio-backend" child of the PCI
adapter device.
Add a QMP schema example so clients will know how to use
block_set_io_throttle on the virtio-blk-pci device.
The alternative is to implement some sort of aliasing for qmp_get_blk()
but that is likely to cause confusion and could break future use cases.
Let's not go there.
Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20180117090700.25811-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This request supersedes the one from 2018-01-19. The only difference
is that the patch deprecating ppcemb-softmmu, and thereby creating
many annying warnings from make check has been removed.
Highlights are:
* Significant TCG speedup by optimizing cmp generation
* Fix a regression caused by recent change to set compat mode on
hotplugged cpus
* Cleanup of default configs
* Some implementation of msgsnd/msgrcv instructions for server chips
-----BEGIN PGP SIGNATURE-----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=Y+Y+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180121' into staging
ppc patch queue 2018-01-21
This request supersedes the one from 2018-01-19. The only difference
is that the patch deprecating ppcemb-softmmu, and thereby creating
many annying warnings from make check has been removed.
Highlights are:
* Significant TCG speedup by optimizing cmp generation
* Fix a regression caused by recent change to set compat mode on
hotplugged cpus
* Cleanup of default configs
* Some implementation of msgsnd/msgrcv instructions for server chips
# gpg: Signature made Sun 21 Jan 2018 05:30:54 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.12-20180121:
target/ppc/spapr_caps: Add macro to generate spapr_caps migration vmstate
target/ppc: add support for hypervisor doorbells on book3s CPUs
sii3112: Add explicit type casts to avoid unintended sign extension
sm501: Add missing break to case
target-ppc: optimize cmp translation
spapr: fix device tree properties when using compatibility mode
spapr: drop duplicate variable in spapr_core_plug()
target/ppc: msgsnd and msgclr instructions need hypervisor privilege
target/ppc: fix doorbell and hypervisor doorbell definitions
hw/ppc/Makefile: Add a way to disable the PPC4xx boards
default-configs/ppc-softmmu: Restructure the switches according to the machines
default-configs/ppc64-softmmu: Include 32-bit configs instead of copying them
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
stfle.81 (ppa15) is a transparent facility that can be passed to the
guest without the need to implement hypervisor support. As this feature
can be provided by firmware we add it to all full models.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180118085628.40798-4-borntraeger@de.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We need to handle the bpb control on reset and migration. Normally
stfle.82 is transparent (and the normal guest part works without
hypervisor activity). To prevent any issues we require full
host kernel support for this feature.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <20180118085628.40798-3-borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
[CH: 'Branch Prediction Blocking' -> 'Branch prediction blocking']
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
CC == 2 can only happen due to a protection exception, not if memory is
not available (PGM_ADDRESSING). So all PGM_ADDRESSING exceptions have to
be forwarded to the guest.
Since the initial definition of TEST PROTECTION, we now read globals
(e.g. PSW mask), so we have to correctly mark the instruction
(otherwise, e.g. booting fedora 27 fails).
Also, the architecture explicitly specifies which exceptions are
forwarded to the guest, this makes the code a little nicer.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20180112125452.8569-1-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Fix storage attribute migration so that it does not fail for guests
with more than a few GB of RAM.
With such guests, the index in the buffer would go out of bounds,
usually by large amounts, thus receiving -EFAULT from the kernel.
Migration itself would be successful, but storage attributes would then
not be migrated completely.
This patch fixes the out of bounds access, and thus migration of all
storage attributes when the guest have large amounts of memory.
Cc: qemu-stable@nongnu.org
Signed-off-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Fixes: 903fd80b03 ("s390x/migration: Storage attributes device")
Message-Id: <1516297904-18188-1-git-send-email-imbrenda@linux.vnet.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
One fprintf(stderr, was manually converted to a
qemu_log_mask(LOG_GUEST_ERROR,
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <3f49c0ff601f27534d4536c87c00d01c233e067f.1513790495.git.alistair.francis@xilinx.com>
[CH: tweaked commit message]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Linux crashes right now if maxmem > mem is specified on the command line.
On s390x, the guest can hotplug memory itself right now - very weird -
and e.g. Fedora 27 will simply add all memory it can when booting.
So now, we have at least the same behavior on TCG and KVM.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171218224616.21030-3-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Linux uses TEST PROTECTION to sense for available memory locations.
Let's implement what we can for now (just as for the other instructions,
excluding AR mode and special protection mechanisms).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20171218224616.21030-2-david@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The highest cpu address is not the same as max_cpus. max_cpus
counts from 1 while the cpu address starts at 0.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <20171219082807.84494-1-borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
[THH: Changed one missing fprintf into an error_report, too]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Cc: Eric Blake <eblake@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Replace all occurs of __FUNCTION__ except for the check in checkpatch
with the non GCC specific __func__.
One line in hcd-musb.c was manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
[THH: Removed hunks related to pxa2xx_mmci.c (fixed already)]
Signed-off-by: Thomas Huth <thuth@redhat.com>
CPU hot-plugging on s390x is possible with both, "cpu-add"
and "device_add", so test both.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Hot plugging on ppc64 is possible via "device_add", too. Unlike x86,
we must not specify a 'socket-id' and 'thread-id' here, so this needs
to be done with a separate function that just specifies the 'core-id'
during the "device_add".
Reviewed-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using 'device_add' instead of 'cpu-add' is the new way for
hot-plugging CPUs, so we should test this regularly, too.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Tested-by: Daniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The test will be extended to work on other architectures, too, so let's
use a more generic name for the file and the functions in here first.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Python GDB support may use Python 2 or 3.
Inferior.read_memory() may return a 'buffer' with Python 2 or a
'memoryview' with Python 3 (see also
https://sourceware.org/gdb/onlinedocs/gdb/Inferiors-In-Python.html)
The elf.add_vmcoreinfo_note() method expects a "bytes" object. Wrap
the returned memory with bytes(), which works with both 'memoryview'
and 'buffer'.
Fixes a regression introduced with commit
d23bfa91b7 ("add vmcoreinfo").
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The vmstate description and the contained needed function for migration
of spapr_caps is the same for each cap, with the name of the cap
substituted. As such introduce a macro to allow for easier generation of
these.
Convert the three existing spapr_caps (htm, vsx, and dfp) to use this
macro.
Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The hypervisor doorbells are used by skiboot and Linux on POWER9
processors to wake up secondaries.
This adds processor control support to the Server architecture by
reusing the Embedded support. They are very similar, only the bits
definition of the CPU identifier differ.
Still to be done is message broadcast to all threads of the same
processor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Noticed by Coverity
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Noticed by Coverity, forgotten in 5690d9ece
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We know that only one bit (in addition to SO) is going to be set in
the condition register, so do two movconds instead of three setconds,
three shifts and two ORs.
For ppc64-linux-user, the code size reduction is around 5% and the
performance improvement slightly less than 10%. For softmmu, the
improvement is around 5%.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 51f84465dd changed the compatility mode setting logic:
- machine reset only sets compatibility mode for the boot CPU
- compatibility mode is set for other CPUs when they are put online
by the guest with the "start-cpu" RTAS call
This causes a regression for machines started with max-compat-cpu:
the device tree nodes related to secondary CPU cores contain wrong
"cpu-version" and "ibm,pa-features" values, as shown below.
Guest started on a POWER8 host with:
-smp cores=2 -machine pseries,max-cpu-compat=compat7
ibm,pa-features = [18 00 f6 3f c7 c0 80 f0 80 00
00 00 00 00 00 00 00 00 80 00 80 00 80 00 00 00];
cpu-version = <0x4d0200>;
^^^
second CPU core
ibm,pa-features = <0x600f63f 0xc70080c0>;
cpu-version = <0xf000003>;
^^^
boot CPU core
The second core is advertised in raw POWER8 mode. This happens because
CAS assumes all CPUs to have the same compatibility mode. Since the
boot CPU already has the requested compatibility mode, the CAS code
does not set it for the secondary one, and exposes the bogus device
tree properties in in the CAS response to the guest.
A similar situation is observed when hot-plugging a CPU core. The
related device tree properties are generated and exposed to guest
with the "ibm,configure-connector" RTAS before "start-cpu" is called.
The CPU core is advertised to the guest in raw mode as well.
It both cases, it boils down to the fact that "start-cpu" happens too
late. This can be fixed globally by propagating the compatibility mode
of the boot CPU to the other CPUs during reset. For this to work, the
compatibility mode of the boot CPU must be set before the machine code
actually resets all CPUs.
It is not needed to set the compatibility mode in "start-cpu" anymore,
so the code is dropped.
Fixes: 51f84465dd
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
A variable is already defined at the begining of the function to
hold a pointer to the CPU core object:
sPAPRCPUCore *core = SPAPR_CPU_CORE(OBJECT(dev));
No need to define it again in the pre-2.10 compatibility code snipplet.
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit f03a1af581 ("ppc: Fix POWER7 and POWER8 exception definitions")
introduced definitions for the server doorbell exceptions by reusing
the embedded definitions but this adds complexity in the powerpc_excp()
routine. Let's introduce specific definitions for the Server doorbells
exception.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
We've got the config switch CONFIG_PPC4XX, so we should use it
in the Makefile accordingly and only include the PPC4xx boards
if this switch has been enabled. (Note: Unfortunately, the files
ppc4xx_devs.c and ppc405_uc.c still have to be included in the
build anyway to fulfil some complicated linker dependencies ...
so these are subject to a more thourough clean-up later)
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Order the CONFIG switches in ppc-softmmu.mak according to the machine
classes where they are used (embedded, Mac or PReP), so that it is
easier for the users to disable a set of switches completely if they
are not needed.
Also add the missing CONFIG_IDE_SII3112 switch to the embedded section
which was previously only added to ppcemb-softmmu.mak.
And while we're at it, also remove the CONFIG_IDE_CMD646 switch since
this controller does not seem to be used by any ppc machine in QEMU.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
