We were premature if bumping this because some of our builds are still
on older glibs. Just copy the compat handler for now and we can remove
it later.
Fixes: ee293103b0 (plugins: update lockstep to use g_memdup2)
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2161
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-14-alex.bennee@linaro.org>
With the conversion to meson and removing the old QEMU Makefile
baggage we became very silent when building the plugins. Bring in a
copy of the quiet-command logic (and some magic COMMAs) so we can at
least assure developers we are building them.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2457
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-13-alex.bennee@linaro.org>
In append_stats_line(), we have an expression
l2_access ? l2_miss_rate : 0.0
But this is inside an if (l2_access && l2_misses) { ... } block,
so Coverity points out that the false part of the ?: is dead code.
Remove the unnecessary test.
Resolves: Coverity CID 1522458
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240725164851.1930964-1-peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240729144414.830369-12-alex.bennee@linaro.org>
Register values are dumped as 'sz' chunks of two nibbles in the execlog
plugin, sz was 1 too big.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240620083805.73603-1-frederic.petrot@univ-grenoble-alpes.fr>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-8-alex.bennee@linaro.org>
This new plugin allows to stop emulation using conditions on the
emulation state. By setting this plugin arguments, it is possible
to set an instruction count limit and/or trigger address(es) to stop at.
The code returned at emulation exit can be customized.
This plugin demonstrates how someone could stop QEMU execution.
It could be used for research purposes to launch some code and
deterministically stop it and understand where its execution flow went.
Co-authored-by: Alexandre Iooss <erdnaxe@crans.org>
Signed-off-by: Simon Hamelin <simon.hamelin@grenoble-inp.org>
Signed-off-by: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240715081521.19122-2-simon.hamelin@grenoble-inp.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240718094523.1198645-5-alex.bennee@linaro.org>
We were repeating information which wasn't super clear. As we already
will have dumped the last failing PC just note the divergence and dump
the previous instruction log.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-27-alex.bennee@linaro.org>
This really helps with lockstep although its super slow on big jobs.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-26-alex.bennee@linaro.org>
The ExecState is shared across the socket and if we want to compare
say 64 bit and 32 bit binaries we need the two to use the same sizes
for things.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-25-alex.bennee@linaro.org>
We can't assign sock_path directly from the autofree'd GStrv, take a
copy.
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240705084047.857176-24-alex.bennee@linaro.org>
This plugin uses the new time control interface to make decisions
about the state of time during the emulation. The algorithm is
currently very simple. The user specifies an ips rate which applies
per core. If the core runs ahead of its allocated execution time the
plugin sleeps for a bit to let real time catch up. Either way time is
updated for the emulation as a function of total executed instructions
with some adjustments for cores that idle.
Examples
--------
Slow down execution of /bin/true:
$ num_insn=$(./build/qemu-x86_64 -plugin ./build/tests/plugin/libinsn.so -d plugin /bin/true |& grep total | sed -e 's/.*: //')
$ time ./build/qemu-x86_64 -plugin ./build/contrib/plugins/libips.so,ips=$(($num_insn/4)) /bin/true
real 4.000s
Boot a Linux kernel simulating a 250MHz cpu:
$ /build/qemu-system-x86_64 -kernel /boot/vmlinuz-6.1.0-21-amd64 -append "console=ttyS0" -plugin ./build/contrib/plugins/libips.so,ips=$((250*1000*1000)) -smp 1 -m 512
check time until kernel panic on serial0
Tested in system mode by booting a full debian system, and using:
$ sysbench cpu run
Performance decrease linearly with the given number of ips.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240530220610.1245424-7-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240620152220.2192768-11-alex.bennee@linaro.org>
Instead of returning a host pointer, copy the data into
storage provided by the caller.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
1. The g_pattern_match_string() is deprecated when glib2 version >= 2.70.
Use g_pattern_spec_match_string() instead to avoid this problem.
2. The type of second parameter in g_ptr_array_add() is
'gpointer' {aka 'void *'}, but the type of reg->name is 'const char*'.
Cast the type of reg->name to 'gpointer' to avoid this problem.
compiler warning message:
contrib/plugins/execlog.c:330:17: warning: ‘g_pattern_match_string’
is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations]
330 | if (g_pattern_match_string(pat, rd->name) ||
| ^~
In file included from /usr/include/glib-2.0/glib.h:67,
from contrib/plugins/execlog.c:9:
/usr/include/glib-2.0/glib/gpattern.h:57:15: note: declared here
57 | gboolean g_pattern_match_string (GPatternSpec *pspec,
| ^~~~~~~~~~~~~~~~~~~~~~
contrib/plugins/execlog.c:331:21: warning: ‘g_pattern_match_string’
is deprecated: Use 'g_pattern_spec_match_string' instead [-Wdeprecated-declarations]
331 | g_pattern_match_string(pat, rd_lower)) {
| ^~~~~~~~~~~~~~~~~~~~~~
/usr/include/glib-2.0/glib/gpattern.h:57:15: note: declared here
57 | gboolean g_pattern_match_string (GPatternSpec *pspec,
| ^~~~~~~~~~~~~~~~~~~~~~
contrib/plugins/execlog.c:339:63: warning: passing argument 2 of
‘g_ptr_array_add’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
339 | g_ptr_array_add(all_reg_names, reg->name);
| ~~~^~~~~~
In file included from /usr/include/glib-2.0/glib.h:33:
/usr/include/glib-2.0/glib/garray.h:198:62: note: expected
‘gpointer’ {aka ‘void *’} but argument is of type ‘const char *’
198 | gpointer data);
| ~~~~~~~~~~~~~~~~~~^~~~
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2210
Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com>
Message-ID: <20240326015257.21516-1-yaoxt.fnst@fujitsu.com>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
rec->count.score is inside rec, which is freed before rec->count.score is.
Reorder the instructions
Reported by Coverity as CID 1539967.
Cc: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the new plugin register API we can now track changes to register
values. Currently the implementation is fairly dumb which will slow
down if a large number of register values are being tracked. This
could be improved by only instrumenting instructions which mention
registers we are interested in tracking.
Example usage:
./qemu-aarch64 -D plugin.log -d plugin \
-cpu max,sve256=on \
-plugin contrib/plugins/libexeclog.so,reg=sp,reg=z\* \
./tests/tcg/aarch64-linux-user/sha512-sve
will display in the execlog any changes to the stack pointer (sp) and
the SVE Z registers.
As testing registers every instruction will be quite a heavy operation
there is an additional flag which attempts to optimise the register
tracking by only instrumenting instructions which are likely to change
its value. This relies on the QEMU disassembler showing up the register
names in disassembly so is an explicit opt-in.
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Cc: Akihiko Odaki <akihiko.odaki@daynix.com>
Based-On: <20231025093128.33116-19-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-27-alex.bennee@linaro.org>
We can't directly save the ephemeral imatch from argv as that memory
will get recycled.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-26-alex.bennee@linaro.org>
This information is already accessible using qemu_info_t during plugin
install.
We will introduce another function (qemu_plugin_num_vcpus) which
represent how many cpus were enabled, by tracking new cpu indexes.
It's a breaking change, so we bump API version.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240213094009.150349-2-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-16-alex.bennee@linaro.org>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1972
Cross compile gcc is more picky about argument order than msys. Changed
the meson command to take the (now renamed) libqemu_plugin_api.a as a
lib, rather than an object. This puts it in the right place on both
native and cross compile gcc commands
Reenable plugins on crossbuilds
Signed-off-by: Greg Manning <gmanning@rapitasystems.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231109124326.21106-2-gmanning@rapitasystems.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231120150833.2552739-5-alex.bennee@linaro.org>
The lockstep plugin uses unix sockets and would require a different
communication mechanism to work on Windows.
Signed-off-by: Greg Manning <gmanning@rapitasystems.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231102172053.17692-4-gmanning@rapitasystems.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-16-alex.bennee@linaro.org>
Generate a qemu_plugin_api.lib delay import lib on windows, for
windows qemu plugins to link against.
Implement an example dll load fail hook to link up the API functions
correctly when a plugin is loaded on windows.
Update the build scripts for the test and example plugins to use these
things.
Signed-off-by: Greg Manning <gmanning@rapitasystems.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231102172053.17692-3-gmanning@rapitasystems.com>
[AJB: use find_program for dlltool, s/Windows/windows/]
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-15-alex.bennee@linaro.org>
This patch closes the file descriptor fd on error return to avoid
resource leak.
Fixes: ec7ee95db9 ("contrib/plugins: fix coverity warning in lockstep")
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Message-Id: <20231018025225.1640122-1-liucong2@kylinos.cn>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231029145033.592566-20-alex.bennee@linaro.org>
Coverity complains that we have an unbalance use of mutex leading to
potential deadlocks.
Fixes: CID 1519048
Fixes: a208ba09bd ("tests/plugin: add a hotblocks plugin")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-26-alex.bennee@linaro.org>
Coverity complains that e don't check for a truncation when copying in
the path. Bail if we can't copy the whole path into sockaddr.
Fixes: CID 1519045
Fixes: CID 1519046
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-25-alex.bennee@linaro.org>
Coverity complains that appends_stats_line can be fed a 0 leading
to the undefined behaviour of a divide by 0.
Fixes: CID 1519044
Fixes: CID 1519047
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-24-alex.bennee@linaro.org>
execlog had the following comment:
> As we could have multiple threads trying to do this we need to
> serialise the expansion under a lock. Threads accessing already
> created entries can continue without issue even if the ptr array
> gets reallocated during resize.
However, when the ptr array gets reallocated, the other threads may have
a stale reference to the old buffer. This results in use-after-free.
Use GRWLock to properly fix this issue.
Fixes: 3d7caf145e ("contrib/plugins: add execlog to log instruction execution and memory access")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230912224107.29669-5-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231009164104.369749-12-alex.bennee@linaro.org>
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
=dH7/
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* only build util/async-teardown.c when system build is requested
* target/i386: fix BQL handling of the legacy FERR interrupts
* target/i386: fix memory operand size for CVTPS2PD
* target/i386: Add support for AMX-COMPLEX in CPUID enumeration
* compile plugins on Darwin
* configure and meson cleanups
* drop mkvenv support for Python 3.7 and Debian10
* add wrap file for libblkio
* tweak KVM stubs
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT5t6UUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroMmjwf+MpvVuq+nn+3PqGUXgnzJx5ccA5ne
# O9Xy8+1GdlQPzBw/tPovxXDSKn3HQtBfxObn2CCE1tu/4uHWpBA1Vksn++NHdUf2
# P0yoHxGskJu5iYYTtIcNw5cH2i+AizdiXuEjhfNjqD5Y234cFoHnUApt9e3zBvVO
# cwGD7WpPuSb4g38hHkV6nKcx72o7b4ejDToqUVZJ2N+RkddSqB03fSdrOru0hR7x
# V+lay0DYdFszNDFm05LJzfDbcrHuSryGA91wtty7Fzj6QhR/HBHQCUZJxMB5PI7F
# Zy4Zdpu60zxtSxUqeKgIi7UhNFgMcax2Hf9QEqdc/B4ARoBbboh4q4u8kQ==
# =dH7/
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 07 Sep 2023 07:44:37 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (51 commits)
docs/system/replay: do not show removed command line option
subprojects: add wrap file for libblkio
sysemu/kvm: Restrict kvm_pc_setup_irq_routing() to x86 targets
sysemu/kvm: Restrict kvm_has_pit_state2() to x86 targets
sysemu/kvm: Restrict kvm_get_apic_state() to x86 targets
sysemu/kvm: Restrict kvm_arch_get_supported_cpuid/msr() to x86 targets
target/i386: Restrict declarations specific to CONFIG_KVM
target/i386: Allow elision of kvm_hv_vpindex_settable()
target/i386: Allow elision of kvm_enable_x2apic()
target/i386: Remove unused KVM stubs
target/i386/cpu-sysemu: Inline kvm_apic_in_kernel()
target/i386/helper: Restrict KVM declarations to system emulation
hw/i386/fw_cfg: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'cpu.h' header
hw/i386/pc: Include missing 'sysemu/tcg.h' header
Revert "mkvenv: work around broken pip installations on Debian 10"
mkvenv: assume presence of importlib.metadata
Python: Drop support for Python 3.7
configure: remove dead code
meson: list leftover CONFIG_* symbols
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The initial reason to write this patch was to remove the last use of
CONFIG_DEBUG_TCG from the makefiles; the flags to use to build TCG
plugins are unrelated to --enable-debug-tcg, and instead they should
be the same as those used to build emulators (the plugins are not build
via meson for demonstration reasons only).
However, since contrib/plugins/Makefile is also the last case of doing
a compilation job using config-host.mak, go a step further and make it
use a completely separate configuration file, removing all references
to compilers from the toplevel config-host.mak. Clean up references to
empty variables, and use .SECONDARY so that intermediate object files
are not deleted.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Under Darwin, using -shared makes it impossible to have undefined symbols
and -bundle has to be used instead; so detect the OS and use
different options.
Based-on: <20230907101811.469236-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes on Darwin:
plugins/lockstep.c:138:25: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
us->pc, them->pc, g_slist_length(divergence_log),
^~~~~~
plugins/lockstep.c:138:33: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
us->pc, them->pc, g_slist_length(divergence_log),
^~~~~~~~
plugins/lockstep.c:148:25: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
us->pc, us->insn_count, them->pc, them->insn_count);
^~~~~~
plugins/lockstep.c:148:49: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
us->pc, us->insn_count, them->pc, them->insn_count);
^~~~~~~~
plugins/lockstep.c:156:36: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
prev->block->pc, prev->block->insns,
^~~~~~~~~~~~~~~
plugins/lockstep.c:156:53: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
prev->block->pc, prev->block->insns,
^~~~~~~~~~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230907105004.88600-5-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes on Darwin:
plugins/howvec.c:186:40: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
class->count);
^~~~~~~~~~~~
plugins/howvec.c:213:36: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
rec->count,
^~~~~~~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230907105004.88600-4-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes on Darwin:
plugins/drcov.c:52:13: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
start_code, end_code, entry, path);
^~~~~~~~~~
plugins/drcov.c:52:25: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
start_code, end_code, entry, path);
^~~~~~~~
plugins/drcov.c:52:35: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
start_code, end_code, entry, path);
^~~~~
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230907105004.88600-3-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes on Darwin:
plugins/cache.c:550:28: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l1_daccess,
^~~~~~~~~~
plugins/cache.c:551:28: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l1_dmisses,
^~~~~~~~~~
plugins/cache.c:553:28: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l1_iaccess,
^~~~~~~~~~
plugins/cache.c:554:28: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l1_imisses,
^~~~~~~~~~
plugins/cache.c:560:32: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l2_access,
^~~~~~~~~
plugins/cache.c:561:32: warning: format specifies type 'unsigned long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
l2_misses,
^~~~~~~~~
plugins/cache.c:665:52: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
g_string_append_printf(rep, ", %ld, %s\n", insn->l1_dmisses,
~~~ ^~~~~~~~~~~~~~~~
%llu
plugins/cache.c:678:52: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
g_string_append_printf(rep, ", %ld, %s\n", insn->l1_imisses,
~~~ ^~~~~~~~~~~~~~~~
%llu
plugins/cache.c:695:52: warning: format specifies type 'long' but the argument has type 'uint64_t' (aka 'unsigned long long') [-Wformat]
g_string_append_printf(rep, ", %ld, %s\n", insn->l2_misses,
~~~ ^~~~~~~~~~~~~~~
%llu
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230907105004.88600-2-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
-soname is not needed for runtime-loaded modules. For example, Meson says:
if not isinstance(target, build.SharedModule) or target.force_soname:
# Add -Wl,-soname arguments on Linux, -install_name on OS X
commands += linker.get_soname_args(
self.environment, target.prefix, target.name, target.suffix,
target.soversion, target.darwin_versions)
(force_soname is set is shared modules are linked into a build target, which is not
the case here.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The old g_memdup is deprecated, use the replacement.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-22-alex.bennee@linaro.org>
It was hard to track down this leak as it was an internal allocation
by glib and the backtraces did not give much away. The autofree was
freeing the allocation with g_free() but not taking care of the
individual strings. They should have been freed with g_strfreev()
instead.
Searching the glib source code for the correct string free function
led to:
G_DEFINE_AUTO_CLEANUP_FREE_FUNC(GStrv, g_strfreev, NULL)
and indeed if you read to the bottom of the documentation page you
will find:
typedef gchar** GStrv;
A typedef alias for gchar**. This is mostly useful when used together with g_auto().
So fix up all the g_autofree g_strsplit case that smugly thought they
had de-allocation covered.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-21-alex.bennee@linaro.org>
Meson already knows to test with the positive form of the flag, which
simplifies the test. Warnings are now tested explicitly for the C++
compiler, instead of hardcoding those that are only available for
the C language.
At this point all compiler flags in QEMU_CFLAGS are global and only
depend on the OS. No feature tests are performed in configure.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
QEMU adds the path to glib.h to all compilation commands. This is simpler
due to the pervasive use of static_library, and was grandfathered in from
the previous Make-based build system. Until Meson 0.63 the only way to
do this was to detect glib in configure and use add_project_arguments,
but now it is possible to use add_project_dependencies instead.
gmodule is detected in a separate variable, with export enabled for
modules and disabled for plugin.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We originally naively treated expansion as safe because we expected
each new CPU/thread to appear in order. However the -M raspi2 model
triggered a case where a new high cpu_index thread started executing
just before a smaller one.
Clean this up by converting the GArray into the simpler GPtrArray and
then holding a lock for the expansion.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20221027183637.2772968-29-alex.bennee@linaro.org>
We used to rely on QEMU_CFLAGS to expose the debug flags but now this
is synthesised by meson and only available to the main build. Add our
own flags if we detect the build has been enabled with
CONFIG_DEBUG_TCG (which is the default for --enable-debug anyway).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221027183637.2772968-28-alex.bennee@linaro.org>
The purpose of the matches was to only track the execution of
instructions we care about. Without resetting skip to the value at the
start of the block we end up dumping all instructions after the match
with the consequent load on the instrumentation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Cc: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220929114231.583801-40-alex.bennee@linaro.org>
Sometimes the whole execlog is just two much so add the ability to
filter by instruction opcode or address.
[AJB: this shows for example
qemu-system-aarch64 -display none -serial mon:stdio \
-M virt -cpu max \
-semihosting-config enable=on \
-kernel ./tests/tcg/aarch64-softmmu/memory-sve \
-plugin ./contrib/plugins/libexeclog.so,ifilter=st1w,afilter=0x40001808 -d plugin -D plugin.out
the st1w SVE instruction is not instrumenting its stores.]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alexandre Iooss <erdnaxe@crans.org>
Cc: Robert Henry <robhenry@microsoft.com>
Cc: Aaron Lindsay <aaron@os.amperecomputing.com>
Message-Id: <20220929114231.583801-36-alex.bennee@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220707163720.1421716-5-berrange@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch adds the ability to generate files in drcov format. Primary
goal this script is to have coverage logfiles thatwork in Lighthouse.
Signed-off-by: Ivanov Arkady <arkadiy.ivanov@ispras.ru>
Message-Id: <163491884553.304355.13246023070235438959.stgit@pc-System-Product-Name>
[AJB: use g_ptr_array instead of slist]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220204204335.1689602-23-alex.bennee@linaro.org>
By default L2 is not enabled and is enabled by either using the
newly-introduced "l2" boolean argument, or by setting any of the L2
cache parameters using args. On specifying "l2=on", the default cache
configuration is used.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210810134844.166490-5-ma.mandourr@gmail.com>
Message-Id: <20211026102234.3961636-17-alex.bennee@linaro.org>
This way of handling args is more lenient and sets a better framework to
parse boolean command line arguments.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210810134844.166490-4-ma.mandourr@gmail.com>
Message-Id: <20211026102234.3961636-16-alex.bennee@linaro.org>
This adds an implementation of a simple L2 configuration, in which a
unified L2 cache (stores both blocks of instructions and data) is
maintained for each core separately, with no inter-core interaction
taken in account. The L2 cache is used as a backup for L1 and is only
accessed if the wanted block does not exist in L1.
In terms of multi-threaded user-space emulation, the same approximation
of L1 is done, a static number of caches is maintained, and each and
every memory access initiated by a thread will have to go through one of
the available caches.
An atomic increment is used to maintain the number of L2 misses per
instruction.
The default cache parameters of L2 caches is:
2MB cache size
16-way associativity
64-byte blocks
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210810134844.166490-3-ma.mandourr@gmail.com>
Message-Id: <20211026102234.3961636-15-alex.bennee@linaro.org>
