We don't need to fill the full pic[] array if we only use
few of the interrupt lines. Directly call qdev_get_gpio_in()
when necessary.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-6-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The MusicPal board code connects both of the IRQ outputs of the UART
to the same INTC qemu_irq. Connecting two qemu_irqs outputs directly
to the same input is not valid as it produces subtly wrong behaviour
(for instance if both the IRQ lines are high, and then one goes
low, the INTC input will see this as a high-to-low transition
even though the second IRQ line should still be holding it high).
This kind of wiring needs an explicitly created OR gate; add one.
Inspired-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-5-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
omap2420_mpu_init() introduced in commit 827df9f3c5 ("Add basic
OMAP2 chip support") takes care of creating the 3 UARTs.
Then commit 58a26b477e ("Emulate a serial bluetooth HCI with H4+
extensions and attach to n8x0's UART") added n8x0_uart_setup()
which create the UART and connects it to an IRQ output,
overwritting the existing peripheral and its IRQ connection.
This is incorrect.
Fortunately we don't need to fix this, because commit 6da68df7f9
("hw/arm/nseries: Replace the bluetooth chardev with a "null"
chardev") removed the use of this peripheral. We can simply
remove the code.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-4-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The system configuration controller (SYSCFG) doesn't have
any output IRQ (and the INTC input #71 belongs to the UART6).
Remove the invalid code.
Fixes: db635521a0 ("stm32f205: Add the stm32f205 SoC")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-3-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We can use one MPC per SRAM bank, but we currently only wire the
IRQ from the first expansion MPC to the IRQ splitter. Fix that.
Fixes: bb75e16d5e ("hw/arm/iotkit: Wire up MPC interrupt lines")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201107193403.436146-2-f4bug@amsat.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When using a Cortex-A15, the Virt machine does not use any
MPCore peripherals. Remove the dependency.
Fixes: 7951c7b7c0 ("hw/arm: Express dependencies of the virt machine with Kconfig")
Reported-by: Miroslav Rezanina <mrezanin@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201107114852.271922-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We should use printf format specifier "%u" instead of "%d" for
argument of type "unsigned int".
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 5FA280F5.8060902@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
commit 32bd322a01 ("hw/timer/armv7m_systick: Rewrite to use ptimers")
changed armv7m_systick to build on ptimers. Make sure we have ptimers
in the build when building armv7m_systick.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20201104103343.30392-1-drjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ibex PLIC, the other fixes the Hypvervisor access functions.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl+qDs0ACgkQIeENKd+X
cFR/OwgAra3yNXMLZKHSsQt/fGeymv5gfWCbS3T4ncOLUcaC3IXEaf7udmWVhC4S
g9g6OhbO2jofRvSn0t0hZHAAnbTizKwesRXMQFfqAERn66Aa+yHmZYjsJrRHlwMf
MC3XBO5kgDISwvq7/CEI/RO8el2lEScuH9Mdc7cgDnoPpdX1Vy9Hl5RaDdqCHQck
XcqSnpjRkVQ8pKK6OhvDfD/Al5olKoHFR8k3gy+TrSpVsGDubGljOKUY/m7Ihs0m
ZVZMGbn+BISiFnqtoqb9O29ZxMPZv3tolmRPbT7d+4RqgK2cQ3WS63jXejii21ew
KCWv8CSWyGjMo5td+d6V6QXkPNifpg==
=75u0
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20201109' into staging
This fixes two bugs in the RISC-V port. One is a bug in the
Ibex PLIC, the other fixes the Hypvervisor access functions.
# gpg: Signature made Tue 10 Nov 2020 03:53:49 GMT
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20201109:
hw/intc/ibex_plic: Clear the claim register when read
target/riscv: Split the Hypervisor execute load helpers
target/riscv: Remove the hyp load and store functions
target/riscv: Remove the HS_TWO_STAGE flag
target/riscv: Set the virtualised MMU mode when doing hyp accesses
target/riscv: Add a virtualised MMU Mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
After claiming the interrupt by reading the claim register we want to
clear the register to make sure the interrupt doesn't appear at the next
read.
This matches the documentation for the claim register as when an interrupt
is claimed by a target the relevant bit of IP is cleared (which we already
do): https://docs.opentitan.org/hw/ip/rv_plic/doc/index.html
This also matches the current hardware.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 68d4575deef2559b7a747f3bda193fcf43af4558.1604629928.git.alistair.francis@wdc.com
Since 7f0f1acedf ("hw/block/nvme: support multiple namespaces"), the
namespaces member of NvmeCtrl is no longer a dynamically allocated
array. Remove the free.
Fixes: 7f0f1acedf ("hw/block/nvme: support multiple namespaces")
Reported-by: Coverity (CID 1436131)
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20201104102248.32168-4-its@irrelevant.dk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
nvme_map_sgl_data erroneously uses the sgls member of NvmeIdNs as a
uint16_t.
Reported-by: Coverity (CID 1436129)
Fixes: cba0a8a344 ("hw/block/nvme: add support for scatter gather lists")
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20201104102248.32168-3-its@irrelevant.dk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
As load_device_tree() returns allocated memory,
we need to free it.
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Fixes: bda19d7bb5 ("hw/rx: Add RX GDB simulator")
Reported-by: Coverity (CID 1432307: RESOURCE_LEAK)
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201102104542.2064745-1-f4bug@amsat.org>
Coverity points out that the error-handling paths in the
boston_fdt_filter() function don't free the fdt that was allocated.
Fix the leak by using g_autofree.
Fixes: Coverity CID 1432275
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201106175823.1650-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
* Fix meson build config for Xen.
* Code style fixes.
-----BEGIN PGP SIGNATURE-----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=TwzC
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20201106' into staging
9pfs: some fixes
* Fix meson build config for Xen.
* Code style fixes.
# gpg: Signature made Fri 06 Nov 2020 09:12:51 GMT
# gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395
# gpg: issuer "qemu_oss@crudebyte.com"
# gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4
# Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395
* remotes/cschoenebeck/tags/pull-9p-20201106:
hw/9pfs: Fix Kconfig dependency problem between 9pfs and Xen
hw/9pfs : add space before the open parenthesis '('
hw/9pfs : open brace '{' following struct go on the same line
hw/9pfs : add spaces around operator
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A small PR this time, one bugfix, one removal of minor dead code, one
warning suppression.
-----BEGIN PGP SIGNATURE-----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=e8LT
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dg-gitlab/tags/ppc-for-5.2-20201105' into staging
ppc patch queue for 2020-11-05
A small PR this time, one bugfix, one removal of minor dead code, one
warning suppression.
# gpg: Signature made Thu 05 Nov 2020 03:44:51 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-5.2-20201105:
spapr: Convert hpt_prepare_thread() to use qemu_try_memalign()
spapr: Drop dead code in spapr_reallocate_hpt()
target/ppc/excp_helper: Add a fallthrough for fix compiler warning
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAl+i9YMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpySQH/Ru/sxB9PncR1HsqSf0HC0tt/EMKgyZTXEwQ
FITcjkCvBDS98a1VUvvZbjzTEDEZNnoUv94MjdLeBoptJ7GtK6nPoI6Ke0p1Zqbe
mlY2BCb0FpN8FE+mthjAI03mhw6o8Qo/OPtyISQzUxCVVqUHL5TRAVAQdeidoK8n
RBQ4WogwM/h7wI0d9GGgSxAON8IRQnBYImtzJieBb6zeScwKVFTWI1tqBdOyFN0/
AhzQiNZuhZ7a1XGJIsxmWB1NK2kcXNJuOF0ANh4coIHR0JzmH3xRy+Jnf5e3dYsw
LI23DUZPSTJJXAwKPucyTG7RTX8F55N9DVHC9KDRD6Ntq1oreJ4=
=pcbN
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
pc,pci,vhost,virtio: fixes
Lots of fixes all over the place.
virtio-mem and virtio-iommu patches are kind of fixes but
it seems better to just make them behave sanely than
try to educate users about the limitations ...
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Wed 04 Nov 2020 18:40:03 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream: (31 commits)
contrib/vhost-user-blk: fix get_config() information leak
block/export: fix vhost-user-blk get_config() information leak
block/export: make vhost-user-blk config space little-endian
configure: introduce --enable-vhost-user-blk-server
libvhost-user: follow QEMU comment style
vhost-blk: set features before setting inflight feature
Revert "vhost-blk: set features before setting inflight feature"
net: Add vhost-vdpa in show_netdevs()
vhost-vdpa: Add qemu_close in vhost_vdpa_cleanup
vfio: Don't issue full 2^64 unmap
virtio-iommu: Set supported page size mask
vfio: Set IOMMU page size as per host supported page size
memory: Add interface to set iommu page size mask
virtio-iommu: Add notify_flag_changed() memory region callback
virtio-iommu: Add replay() memory region callback
virtio-iommu: Call memory notifiers in attach/detach
virtio-iommu: Add memory notifiers for map/unmap
virtio-iommu: Store memory region in endpoint struct
virtio-iommu: Fix virtio_iommu_mr()
hw/smbios: Fix leaked fd in save_opt_one() error path
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Commit b2c00bce54 ("meson: convert hw/9pfs, cleanup") introduced
CONFIG_9PFS (probably a wrong conflict resolution). This config is
not used anywhere. Backends depend on CONFIG_FSDEV_9P which itself
depends on CONFIG_VIRTFS.
Remove the invalid CONFIG_9PFS and use CONFIG_FSDEV_9P instead, to
fix the './configure --without-default-devices --enable-xen' build:
/usr/bin/ld: libcommon.fa.p/hw_xen_xen-legacy-backend.c.o: in function `xen_be_register_common':
hw/xen/xen-legacy-backend.c:754: undefined reference to `xen_9pfs_ops'
/usr/bin/ld: libcommon.fa.p/fsdev_qemu-fsdev.c.o:(.data.rel+0x8): undefined reference to `local_ops'
/usr/bin/ld: libcommon.fa.p/fsdev_qemu-fsdev.c.o:(.data.rel+0x20): undefined reference to `synth_ops'
/usr/bin/ld: libcommon.fa.p/fsdev_qemu-fsdev.c.o:(.data.rel+0x38): undefined reference to `proxy_ops'
collect2: error: ld returned 1 exit status
Fixes: b2c00bce54 ("meson: convert hw/9pfs, cleanup")
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Message-Id: <20201104115706.3101190-3-philmd@redhat.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Fix code style. Space required before the open parenthesis '('.
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201030043515.1030223-3-zhangxinhao1@huawei.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
Fix code style. Open braces for struct should go on the same line.
Signed-off-by: Xinhao Zhang <zhangxinhao1@huawei.com>
Signed-off-by: Kai Deng <dengkai1@huawei.com>
Reported-by: Euler Robot <euler.robot@huawei.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Message-Id: <20201030043515.1030223-2-zhangxinhao1@huawei.com>
Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
s390-pci-vfio.c calls into the vfio code, so we need it to be
built conditionally on vfio (which implies CONFIG_LINUX).
Fixes: cd7498d07f ("s390x/pci: Add routine to get the vfio dma available count")
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Message-Id: <20201103123237.718242-1-cohuck@redhat.com>
Acked-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
HPT resizing is asynchronous: the guest first kicks off the creation of a
new HPT, then it waits for that new HPT to be actually created and finally
it asks the current HPT to be replaced by the new one.
In the case of a userland allocated HPT, this currently relies on calling
qemu_memalign() which aborts on OOM and never returns NULL. Since we seem
to have path to report the failure to the guest with an H_NO_MEM return
value, use qemu_try_memalign() instead of qemu_memalign().
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160398563636.32380.1747166034877173994.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Sometimes QEMU needs to allocate the HPT in userspace, namely with TCG
or PR KVM. This is performed with qemu_memalign() because of alignment
requirements. Like glib's allocators, its behaviour is to abort on OOM
instead of returning NULL.
This could be changed to qemu_try_memalign(), but in the specific case
of spapr_reallocate_hpt(), the outcome would be to terminate QEMU anyway
since no HPT means no MMU for the guest. Drop the dead code instead.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <160398562892.32380.15006707861753544263.stgit@bahia.lan>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The source and destination x,y display parameters in ati_2d_blt()
may run off the vga limits if either of s->regs.[src|dst]_[xy] is
zero. Check the parameter values to avoid potential crash.
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20201021103818.1704030-1-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Note that whilst the device does not do anything with these values, they are
logged with trace events and stored to allow future implementation.
The default flow control is set to none at reset as documented in the Linux
ftdi_sio.h header file.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20201027150456.24606-9-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also implement the behaviour reported in Linux's ftdi_sio.c whereby if an invalid
data_bits value is provided then the hardware defaults to using 8.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201027150456.24606-8-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some operating systems will generate a new device ID when a USB device is unplugged
and then replugged into the USB. If this is done whilst switching between multiple
applications over a virtual serial port, the change of device ID requires going
back into the OS/application to locate the new device accordingly.
Add a new always-plugged property that if specified will ensure that the device
always remains attached to the USB regardless of the state of the backend
chardev.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20201027150456.24606-7-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The DeviceOutVendor and DeviceInVendor macros can be replaced with their
equivalent VendorDeviceOutRequest and VendorDeviceRequest macros from usb.h.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20201027150456.24606-6-mark.cave-ayland@ilande.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Virtqueue has split and packed, so before setting inflight,
you need to inform the back-end virtqueue format.
Signed-off-by: Jin Yu <jin.yu@intel.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20201103123617.28256-1-jin.yu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit adb29c0273.
The commit broke -device vhost-user-blk-pci because the
vhost_dev_prepare_inflight() function it introduced segfaults in
vhost_dev_set_features() when attempting to access struct vhost_dev's
vdev pointer before it has been assigned.
To reproduce the segfault simply launch a vhost-user-blk device with the
contrib vhost-user-blk device backend:
$ build/contrib/vhost-user-blk/vhost-user-blk -s /tmp/vhost-user-blk.sock -r -b /var/tmp/foo.img
$ build/qemu-system-x86_64 \
-device vhost-user-blk-pci,id=drv0,chardev=char1,addr=4.0 \
-object memory-backend-memfd,id=mem,size=1G,share=on \
-M memory-backend=mem,accel=kvm \
-chardev socket,id=char1,path=/tmp/vhost-user-blk.sock
Segmentation fault (core dumped)
Cc: Jin Yu <jin.yu@intel.com>
Cc: Raphael Norwitz <raphael.norwitz@nutanix.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20201102165709.232180-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
IOMMUs may declare memory regions spanning from 0 to UINT64_MAX. When
attempting to deal with such region, vfio_listener_region_del() passes a
size of 2^64 to int128_get64() which throws an assertion failure. Even
ignoring this, the VFIO_IOMMU_DMA_MAP ioctl cannot handle this size
since the size field is 64-bit. Split the request in two.
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20201030180510.747225-11-jean-philippe@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to the loongson spec
(http://www.loongson.cn/uploadfile/cpu/3B1500/Loongson_3B1500_cpu_user_1.pdf)
and the macro definition(#define R_PERCORE_ISR(x) (0x40 + 0x8 * x)), we know
that the ISR size per CORE is 8, so here we need to divide
(addr - R_PERCORE_ISR(0)) by 8, not 4.
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Alex Chen <alex.chen@huawei.com>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <5FA12391.8090400@huawei.com>
[PMD: Shortened subject]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201023122633.19466-1-chetan4windows@gmail.com>
[PMD: Added hw/mips/ prefix in subject]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
There is no "version 2" of the "Lesser" General Public License.
It is either "GPL version 2.0" or "Lesser GPL version 2.1".
This patch replaces all occurrences of "Lesser GPL version 2" with
"Lesser GPL version 2.1" in comment section.
Signed-off-by: Chetan Pant <chetan4windows@gmail.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20201016143509.26692-1-chetan4windows@gmail.com>
[PMD: Split hw/ vs target/]
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
We deprecated the support for the 'r4k' machine for the 5.0 release
(commit d32dc61421), which means that our deprecation policy allows
us to drop it in release 5.2. Remove the code.
To repeat the rationale from the deprecation note:
- this virtual machine has no specification
- the Linux kernel dropped support for it 10 years ago
Users are recommended to use the Malta board instead.
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
ACKed-by: Peter Krempa <pkrempa@redhat.com>
Message-Id: <20201102201311.2220005-1-f4bug@amsat.org>
The latest SD card image [1] released by Microchip ships a Linux
kernel with built-in PolarFire SoC I2C driver support. The device
tree file includes the description for the I2C1 node hence kernel
tries to probe the I2C1 device during boot.
It is enough to create an unimplemented device for I2C1 to allow
the kernel to continue booting to the shell.
[1] ftp://ftpsoc.microsemi.com/outgoing/core-image-minimal-dev-icicle-kit-es-sd-20201009141623.rootfs.wic.gz
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-11-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When system memory is larger than 1 GiB (high memory), PolarFire SoC
maps it at address 0x10_0000_0000. Address 0xC000_0000 and above is
aliased to the same 1 GiB low memory with different cache attributes.
At present QEMU maps the system memory contiguously from 0x8000_0000.
This corrects the wrong QEMU logic. Note address 0x14_0000_0000 is
the alias to the high memory, and even physical memory is only 1 GiB,
the HSS codes still tries to probe the high memory alias address.
It seems there is no issue on the real hardware, so we will have to
take that into the consideration in our emulation. Due to this, we
we increase the default system memory size to 1537 MiB (the minimum
required high memory size by HSS) so that user gets notified an error
when less than 1537 MiB is specified.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20201101170538.3732-1-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Somehow HSS needs to access address 0 [1] for the DDR calibration data
which is in the chipset's reserved memory. Let's map it.
[1] See the config_copy() calls in various places in ddr_setup() in
the HSS source codes.
Signed-off-by: Bin Meng <bin.meng@windriver.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1603863010-15807-9-git-send-email-bmeng.cn@gmail.com
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
