Setting the ID in pci_nic_init() is a blatant violation of the
DeviceState abstraction. Which even carries a comment advising
against this:
/* This structure should not be accessed directly. We declare it here
so that it can be embedded in individual device state structures. */
What's worse, it bypasses the code ensuring unique qdev IDs: "-device
virtio-net-pci,id=foo -net nic,id=foo -net nic,name=foo" happily
creates three qdevs with ID "foo". That's because qdev relies on
qemu_opts_create() to ensure unique IDs, but -net nic uses a different
QemuOptsList, which means id is in a different namespace. And its
name is not checked for uniqueness at all.
-net nic and pci_add are legacy. Use -device and device_add if you
want a NIC with a qdev ID.
This reverts what's still left of commit eb54b6dc "qdev: add id=
support for pci nics."
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When mistakenly configuring two devices in the same PCI slot,
QEMU gives a not entirely obvious message about a 'devfn' being
in use:
$ qemu -device rtl8139 -device virtio-balloon-pci,bus=pci.0,addr=0x3
qemu-kvm: -device virtio-balloon-pci,bus=pci.0,addr=0x3: PCI: devfn 24 not available for virtio-balloon-pci, in use by rtl8139
The user does not configure 'devfn' numbers, they use slot+function.
Thus the error messages should be reported back to the user with that
same terminology rather than the internal QEMU terminology. This
patch makes it report:
$ qemu -device rtl8139 -device virtio-balloon-pci,bus=pci.0,addr=0x3
qemu: -device virtio-balloon-pci,bus=pci.0,addr=0x3.7: PCI: slot 3 function 0 not available for virtio-balloon-pci, in use by rtl8139
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Previous commit added QMP documentation to the qemu-monitor.hx
file, it's is a copy of this information.
While it's good to keep it near code, maintaining two copies of
the same information is too hard and has little benefit as we
don't expect client writers to consult the code to find how to
use a QMP command.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
add helper function which converts root bus to pci domain.
make them aware of pci domain.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use pci accessor function.
don't return value because it always return 0 and
the caller doesn't check the return value.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add argument, DeviceState*, to pci hot plug callback.
The argument will be used later to remove global variable.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Code for saving irq_state got vm_state
macros wrong, passing in the wrong parameter.
As a result, we both saved a wrong value
and restored it to a wrong offset.
This leads to device and bus irq counts getting
out of sync, which in turn leads to interrupts getting lost or
never cleared, such as
https://bugzilla.redhat.com/show_bug.cgi?id=588133
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
If the init function of a device fails, as might happen with device
assignment, we never undo the work done by do_pci_register_device().
This not only causes a bit of a memory leak, but also leaves a bogus
pointer in the bus devices array that can cause a segfault or
garbage data from 'info pci'.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When looking down child bus, it should look parent bridge's
bus number, not child bus's.
Optimized tail recursion and style fix.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Unlike virtio, device emulations need to add pci capabilities
at known offsets to match real hardware. Make this possible
by adding an appropriate API.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
error_report() terminates the message with a newline. Strip it it
from its arguments.
This fixes a few error messages lacking a newline:
net_handle_fd_param()'s "No file descriptor named %s found", and
tap_open()'s "vnet_hdr=1 requested, but no kernel support for
IFF_VNET_HDR available" (all three versions).
There's one place that passes arguments without newlines
intentionally: load_vmstate(). Fix it up.
This patch fixes 525e05147d.
pci host bridge doesn't have header type of bridge.
The check should be by header type, instead of pci class device.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
typo in c021f8e65f.
comparison fix.
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When several PCI bridges were in use, monitor command "info pci" would
enter into infinite loop. Buses behind the bridge were not discoverable
because secondary and subordinate bus numbers were not used properly.
Other buses were not found because bus search terminated on first miss.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
PCI bridges' qdev info structures must indicate bridge header type,
otherwise critical bridge registers (esp. PCI_PRIMARY_BUS,
PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS) will not be writable.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This commit completes the do_pci_info() conversion to
QObject by adding support to PCI bridge devices.
This is done by recursively adding devices in the
"pci_bridge" key.
IMPORTANT: This code is being added separately because I could
NOT test it properly. According to Michael Tsirkin, it depends
on ultrasparc and it would take time to do the proper setup.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The returned QObject is a QList of all buses. Each bus is
represented by a QDict, which has a key with a QList of all
PCI devices attached to it. Each device is represented by
a QDict.
As has happended to other complex conversions, it's hard to
split this commit as part of it are new functions which are
called by each other.
IMPORTANT: support for printing PCI bridge attached devices
is NOT part of this commit, it's going to be added by the
next commit, as it's untested.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a pci bus property 'rombar' which specifies whenever
the pci rom should be loaded via pci rom bar (default) or via fw_cfg.
The later can be used for compatibility with older qemu versions where
no pci rom bar is present.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
To match Linux PCI register definition,
rename PCI_SUBVENDOR_ID to PCI_SUBSYSTEM_VENDOR_ID.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PCIBus::config_reg isn't used anymore, so remove it.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch adds a romfile property to the pci bus. It allows to specify
a romfile to load into the rom bar of the pci device. The default value
comes from a new field in PCIDeviceInfo. The property allows to change
the file and also to disable the rom loading using an empty string.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, we preload option roms into the option rom space in memory. This
prevents DDIM from functioning correctly which severely limits the number
of roms we can support.
This patch introduces a pci_add_option_rom() which registers the
PCI_ROM_ADDRESS bar which points to our option rom. It also converts over
the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this
new mechanism.
The result is that PXE boot functions even with three unique types of cards.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Current PCI code will simply hw_error() and thus abort in case no free
PCI slot is available or the requested PCI slot is already in use by
another device. For the hotplug case this behavior is not acceptable.
This patch makes qemu pass up the error properly, so the calling code
can decide whenever it wants to exit with an error (on startup) or
whenever it wants to continue (hotplug).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Interrupt disable bit is mandatory in PCI spec.
Implement it to make devices spec compliant.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
interrupt status is a mandatory feature in PCI spec,
so devices must implement it to be spec compliant.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
This rearranges code in preparation for interrupt state
implementation.
Changes:
- split up bus walk away from interrupt handling
into a subroutine
- change irq_state from an array to bitmask
- verify that irq_state values are 0 or 1 on load
There are no functional changes.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
pci code had a TODO to move apb specific
pci bridge initialization to apb_pci.
Implement this and remove the TODO.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
goto into scope is evil. rearrange pci_bridge_filter
so that we always go to end of function on error.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
- fix bridge prefetchable memory accesser to check 64bit or not.
- use pcibus_t consistently instead mixing pcibus_t and uint64_t.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch replaces magic number, 256, with ARRAY_SIZE().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Split bar address math into a separate function.
In particular, this gets rid of an ugly forward goto
into scope that we have there.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Isaku Yamahata <yamahata@valinux.co.jp>
This patch replaces for loop by memset in pci_init_wmask().
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
including pci_host.h isn't needed by pci.c.
This patch kills it.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch renames pci_find_host_bus() to pci_find_root_bus()
as suggested by "Michael S. Tsirkin" <mst@redhat.com>.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because pci_sub_bus() is used only once so eliminate it
by open coding as suggested by "Michael S. Tsirkin" <mst@redhat.com>.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It printed wrong limit value of bridge.
This patch fixes it.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Only two callers of pci_create_simple/pci_register_device bothered
to check the return value. Other cases were prone to crashing with
spurious NULL pointer dereferences.
Make QEMU exit with an error message when devfn is attempted to
be duplicated, also applies to case when the bus is full. Remove
checks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Change 260c0cd3d9
(pci: use range helper functions) introduced a
bug which made pci cirrus vga on mips malta
(and maybe other pci devices) fail.
Don't change addr - its original value is needed
by ranges_overlap() and range_covers().
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Acked-by: Ryan Harper <ryanh@us.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
